Merge 3.14-rc6 into usb-next

We want the USB fixes in here as well.

Documentation/device-mapper/cache.txt

@@ -124,12 +124,11 @@ the default being 204800 sectors (or 100MB).
 Updating on-disk metadata
 -------------------------
 
-On-disk metadata is committed every time a REQ_SYNC or REQ_FUA bio is
-written.  If no such requests are made then commits will occur every
-second.  This means the cache behaves like a physical disk that has a
-write cache (the same is true of the thin-provisioning target).  If
-power is lost you may lose some recent writes.  The metadata should
-always be consistent in spite of any crash.
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second.  This
+means the cache behaves like a physical disk that has a volatile write
+cache.  If power is lost you may lose some recent writes.  The metadata
+should always be consistent in spite of any crash.
 
 The 'dirty' state for a cache block changes far too frequently for us
 to keep updating it on the fly.  So we treat it as a hint.  In normal

Documentation/device-mapper/thin-provisioning.txt

@@ -116,6 +116,35 @@ Resuming a device with a new table itself triggers an event so the
 userspace daemon can use this to detect a situation where a new table
 already exceeds the threshold.
 
+A low water mark for the metadata device is maintained in the kernel and
+will trigger a dm event if free space on the metadata device drops below
+it.
+
+Updating on-disk metadata
+-------------------------
+
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second.  This
+means the thin-provisioning target behaves like a physical disk that has
+a volatile write cache.  If power is lost you may lose some recent
+writes.  The metadata should always be consistent in spite of any crash.
+
+If data space is exhausted the pool will either error or queue IO
+according to the configuration (see: error_if_no_space).  If metadata
+space is exhausted or a metadata operation fails: the pool will error IO
+until the pool is taken offline and repair is performed to 1) fix any
+potential inconsistencies and 2) clear the flag that imposes repair.
+Once the pool's metadata device is repaired it may be resized, which
+will allow the pool to return to normal operation.  Note that if a pool
+is flagged as needing repair, the pool's data and metadata devices
+cannot be resized until repair is performed.  It should also be noted
+that when the pool's metadata space is exhausted the current metadata
+transaction is aborted.  Given that the pool will cache IO whose
+completion may have already been acknowledged to upper IO layers
+(e.g. filesystem) it is strongly suggested that consistency checks
+(e.g. fsck) be performed on those layers when repair of the pool is
+required.
+
 Thin provisioning
 -----------------
 
@@ -258,10 +287,9 @@ ii) Status
 	should register for the event and then check the target's status.
 
     held metadata root:
-	The location, in sectors, of the metadata root that has been
+	The location, in blocks, of the metadata root that has been
 	'held' for userspace read access.  '-' indicates there is no
-	held root.  This feature is not yet implemented so '-' is
-	always returned.
+	held root.
 
     discard_passdown|no_discard_passdown
 	Whether or not discards are actually being passed down to the

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

@@ -21,9 +21,9 @@ Required Properties:
     must appear in the same order as the output clocks.
   - #clock-cells: Must be 1
   - clock-output-names: The name of the clocks as free-form strings
-  - renesas,indices: Indices of the gate clocks into the group (0 to 31)
+  - renesas,clock-indices: Indices of the gate clocks into the group (0 to 31)
 
-The clocks, clock-output-names and renesas,indices properties contain one
+The clocks, clock-output-names and renesas,clock-indices properties contain one
 entry per gate clock. The MSTP groups are sparsely populated. Unimplemented
 gate clocks must not be declared.
 

Documentation/devicetree/bindings/net/opencores-ethoc.txt

@@ -0,0 +1,22 @@
+* OpenCores MAC 10/100 Mbps
+
+Required properties:
+- compatible: Should be "opencores,ethoc".
+- reg: two memory regions (address and length),
+  first region is for the device registers and descriptor rings,
+  second is for the device packet memory.
+- interrupts: interrupt for the device.
+
+Optional properties:
+- clocks: phandle to refer to the clk used as per
+  Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Examples:
+
+	enet0: ethoc@fd030000 {
+		compatible = "opencores,ethoc";
+		reg = <0xfd030000 0x4000 0xfd800000 0x4000>;
+		interrupts = <1>;
+		local-mac-address = [00 50 c2 13 6f 00];
+		clocks = <&osc>;
+        };

Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt → Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt

@@ -1,4 +1,4 @@
-Broadcom Capri Pin Controller
+Broadcom BCM281xx Pin Controller
 
 This is a pin controller for the Broadcom BCM281xx SoC family, which includes
 BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
@@ -7,14 +7,14 @@ BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
 
 Required Properties:
 
-- compatible:	Must be "brcm,capri-pinctrl".
+- compatible:	Must be "brcm,bcm11351-pinctrl"
 - reg:		Base address of the PAD Controller register block and the size
 		of the block.
 
 For example, the following is the bare minimum node:
 
 	pinctrl@35004800 {
-		compatible = "brcm,capri-pinctrl";
+		compatible = "brcm,bcm11351-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
 
@@ -119,7 +119,7 @@ Optional Properties (for HDMI pins):
 Example:
 // pin controller node
 pinctrl@35004800 {
-	compatible = "brcm,capri-pinctrl";
+	compatible = "brcmbcm11351-pinctrl";
 	reg = <0x35004800 0x430>;
 
 	// pin configuration node

Documentation/networking/can.txt

@@ -554,12 +554,6 @@ solution for a couple of reasons:
   not specified in the struct can_frame and therefore it is only valid in
   CANFD_MTU sized CAN FD frames.
 
-  As long as the payload length is <=8 the received CAN frames from CAN FD
-  capable CAN devices can be received and read by legacy sockets too. When
-  user-generated CAN FD frames have a payload length <=8 these can be send
-  by legacy CAN network interfaces too. Sending CAN FD frames with payload
-  length > 8 to a legacy CAN network interface returns an -EMSGSIZE error.
-
   Implementation hint for new CAN applications:
 
   To build a CAN FD aware application use struct canfd_frame as basic CAN

MAINTAINERS

@@ -73,7 +73,8 @@ Descriptions of section entries:
 	L: Mailing list that is relevant to this area
 	W: Web-page with status/info
 	Q: Patchwork web based patch tracking system site
-	T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit, topgit.
+	T: SCM tree type and location.
+	   Type is one of: git, hg, quilt, stgit, topgit
 	S: Status, one of the following:
 	   Supported:	Someone is actually paid to look after this.
 	   Maintained:	Someone actually looks after it.
@@ -473,7 +474,7 @@ F:	net/rxrpc/af_rxrpc.c
 
 AGPGART DRIVER
 M:	David Airlie <airlied@linux.ie>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+T:	git git://people.freedesktop.org/~airlied/linux (part of drm maint)
 S:	Maintained
 F:	drivers/char/agp/
 F:	include/linux/agp*
@@ -1612,11 +1613,11 @@ S:	Maintained
 F:	drivers/net/wireless/atmel*
 
 ATTO EXPRESSSAS SAS/SATA RAID SCSI DRIVER
-M:      Bradley Grove <linuxdrivers@attotech.com>
-L:      linux-scsi@vger.kernel.org
-W:      http://www.attotech.com
-S:      Supported
-F:      drivers/scsi/esas2r
+M:	Bradley Grove <linuxdrivers@attotech.com>
+L:	linux-scsi@vger.kernel.org
+W:	http://www.attotech.com
+S:	Supported
+F:	drivers/scsi/esas2r
 
 AUDIT SUBSYSTEM
 M:	Eric Paris <eparis@redhat.com>
@@ -2159,7 +2160,7 @@ F:	Documentation/zh_CN/
 
 CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
 M:	Peter Chen <Peter.Chen@freescale.com>
-T:	git://github.com/hzpeterchen/linux-usb.git
+T:	git git://github.com/hzpeterchen/linux-usb.git
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/chipidea/
@@ -2179,9 +2180,9 @@ S:	Supported
 F:	drivers/net/ethernet/cisco/enic/
 
 CISCO VIC LOW LATENCY NIC DRIVER
-M:      Upinder Malhi <umalhi@cisco.com>
-S:      Supported
-F:      drivers/infiniband/hw/usnic
+M:	Upinder Malhi <umalhi@cisco.com>
+S:	Supported
+F:	drivers/infiniband/hw/usnic
 
 CIRRUS LOGIC EP93XX ETHERNET DRIVER
 M:	Hartley Sweeten <hsweeten@visionengravers.com>
@@ -2378,20 +2379,20 @@ F:	drivers/cpufreq/arm_big_little.c
 F:	drivers/cpufreq/arm_big_little_dt.c
 
 CPUIDLE DRIVER - ARM BIG LITTLE
-M:      Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-M:      Daniel Lezcano <daniel.lezcano@linaro.org>
-L:      linux-pm@vger.kernel.org
-L:      linux-arm-kernel@lists.infradead.org
-T:      git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
-S:      Maintained
-F:      drivers/cpuidle/cpuidle-big_little.c
+M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+M:	Daniel Lezcano <daniel.lezcano@linaro.org>
+L:	linux-pm@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+S:	Maintained
+F:	drivers/cpuidle/cpuidle-big_little.c
 
 CPUIDLE DRIVERS
 M:	Rafael J. Wysocki <rjw@rjwysocki.net>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-T:	git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 F:	drivers/cpuidle/*
 F:	include/linux/cpuidle.h
 
@@ -2458,9 +2459,9 @@ S:	Maintained
 F:	sound/pci/cs5535audio/
 
 CW1200 WLAN driver
-M:     Solomon Peachy <pizza@shaftnet.org>
-S:     Maintained
-F:     drivers/net/wireless/cw1200/
+M:	Solomon Peachy <pizza@shaftnet.org>
+S:	Maintained
+F:	drivers/net/wireless/cw1200/
 
 CX18 VIDEO4LINUX DRIVER
 M:	Andy Walls <awalls@md.metrocast.net>
@@ -3095,6 +3096,8 @@ F:	fs/ecryptfs/
 
 EDAC-CORE
 M:	Doug Thompson <dougthompson@xmission.com>
+M:	Borislav Petkov <bp@alien8.de>
+M:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Supported
@@ -4558,6 +4561,7 @@ F:	Documentation/networking/ixgbevf.txt
 F:	Documentation/networking/i40e.txt
 F:	Documentation/networking/i40evf.txt
 F:	drivers/net/ethernet/intel/
+F:	drivers/net/ethernet/intel/*/
 
 INTEL-MID GPIO DRIVER
 M:	David Cohen <david.a.cohen@linux.intel.com>
@@ -4914,7 +4918,7 @@ F:	drivers/staging/ktap/
 KCONFIG
 M:	"Yann E. MORIN" <yann.morin.1998@free.fr>
 L:	linux-kbuild@vger.kernel.org
-T:	git://gitorious.org/linux-kconfig/linux-kconfig
+T:	git git://gitorious.org/linux-kconfig/linux-kconfig
 S:	Maintained
 F:	Documentation/kbuild/kconfig-language.txt
 F:	scripts/kconfig/
@@ -5471,11 +5475,11 @@ S:	Maintained
 F:	drivers/media/tuners/m88ts2022*
 
 MA901 MASTERKIT USB FM RADIO DRIVER
-M:      Alexey Klimov <klimov.linux@gmail.com>
-L:      linux-media@vger.kernel.org
-T:      git git://linuxtv.org/media_tree.git
-S:      Maintained
-F:      drivers/media/radio/radio-ma901.c
+M:	Alexey Klimov <klimov.linux@gmail.com>
+L:	linux-media@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
+F:	drivers/media/radio/radio-ma901.c
 
 MAC80211
 M:	Johannes Berg <johannes@sipsolutions.net>
@@ -5636,7 +5640,7 @@ F:	drivers/scsi/megaraid/
 
 MELLANOX ETHERNET DRIVER (mlx4_en)
 M:	Amir Vadai <amirv@mellanox.com>
-L: 	netdev@vger.kernel.org
+L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
@@ -5677,7 +5681,7 @@ F:	include/linux/mtd/
 F:	include/uapi/mtd/
 
 MEN A21 WATCHDOG DRIVER
-M:  	Johannes Thumshirn <johannes.thumshirn@men.de>
+M:	Johannes Thumshirn <johannes.thumshirn@men.de>
 L:	linux-watchdog@vger.kernel.org
 S:	Supported
 F:	drivers/watchdog/mena21_wdt.c
@@ -5733,20 +5737,20 @@ L:	linux-rdma@vger.kernel.org
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-T:	git://openfabrics.org/~eli/connect-ib.git
+T:	git git://openfabrics.org/~eli/connect-ib.git
 S:	Supported
 F:	drivers/net/ethernet/mellanox/mlx5/core/
 F:	include/linux/mlx5/
 
 Mellanox MLX5 IB driver
-M:      Eli Cohen <eli@mellanox.com>
-L:      linux-rdma@vger.kernel.org
-W:      http://www.mellanox.com
-Q:      http://patchwork.kernel.org/project/linux-rdma/list/
-T:      git://openfabrics.org/~eli/connect-ib.git
-S:      Supported
-F:      include/linux/mlx5/
-F:      drivers/infiniband/hw/mlx5/
+M:	Eli Cohen <eli@mellanox.com>
+L:	linux-rdma@vger.kernel.org
+W:	http://www.mellanox.com
+Q:	http://patchwork.kernel.org/project/linux-rdma/list/
+T:	git git://openfabrics.org/~eli/connect-ib.git
+S:	Supported
+F:	include/linux/mlx5/
+F:	drivers/infiniband/hw/mlx5/
 
 MODULE SUPPORT
 M:	Rusty Russell <rusty@rustcorp.com.au>
@@ -6171,6 +6175,12 @@ S:	Supported
 F:	drivers/block/nvme*
 F:	include/linux/nvme.h
 
+NXP TDA998X DRM DRIVER
+M:	Russell King <rmk+kernel@arm.linux.org.uk>
+S:	Supported
+F:	drivers/gpu/drm/i2c/tda998x_drv.c
+F:	include/drm/i2c/tda998x.h
+
 OMAP SUPPORT
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
@@ -8700,17 +8710,17 @@ S:	Maintained
 F:	drivers/media/radio/radio-raremono.c
 
 THERMAL
-M:      Zhang Rui <rui.zhang@intel.com>
-M:      Eduardo Valentin <eduardo.valentin@ti.com>
-L:      linux-pm@vger.kernel.org
-T:      git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
-T:      git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
-Q:      https://patchwork.kernel.org/project/linux-pm/list/
-S:      Supported
-F:      drivers/thermal/
-F:      include/linux/thermal.h
-F:      include/linux/cpu_cooling.h
-F:      Documentation/devicetree/bindings/thermal/
+M:	Zhang Rui <rui.zhang@intel.com>
+M:	Eduardo Valentin <eduardo.valentin@ti.com>
+L:	linux-pm@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
+Q:	https://patchwork.kernel.org/project/linux-pm/list/
+S:	Supported
+F:	drivers/thermal/
+F:	include/linux/thermal.h
+F:	include/linux/cpu_cooling.h
+F:	Documentation/devicetree/bindings/thermal/
 
 THINGM BLINK(1) USB RGB LED DRIVER
 M:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
@@ -9811,7 +9821,7 @@ ZR36067 VIDEO FOR LINUX DRIVER
 L:	mjpeg-users@lists.sourceforge.net
 L:	linux-media@vger.kernel.org
 W:	http://mjpeg.sourceforge.net/driver-zoran/
-T:	Mercurial http://linuxtv.org/hg/v4l-dvb
+T:	hg http://linuxtv.org/hg/v4l-dvb
 S:	Odd Fixes
 F:	drivers/media/pci/zoran/
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*

arch/arc/mm/cache_arc700.c

@@ -282,7 +282,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
 #else
 	/* if V-P const for loop, PTAG can be written once outside loop */
 	if (full_page_op)
-		write_aux_reg(ARC_REG_DC_PTAG, paddr);
+		write_aux_reg(aux_tag, paddr);
 #endif
 
 	while (num_lines-- > 0) {
@@ -296,7 +296,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
 		write_aux_reg(aux_cmd, vaddr);
 		vaddr += L1_CACHE_BYTES;
 #else
-		write_aux_reg(aux, paddr);
+		write_aux_reg(aux_cmd, paddr);
 		paddr += L1_CACHE_BYTES;
 #endif
 	}

arch/arm/Kconfig

@@ -1575,6 +1575,7 @@ config BL_SWITCHER_DUMMY_IF
 
 choice
 	prompt "Memory split"
+	depends on MMU
 	default VMSPLIT_3G
 	help
 	  Select the desired split between kernel and user memory.
@@ -1592,6 +1593,7 @@ endchoice
 
 config PAGE_OFFSET
 	hex
+	default PHYS_OFFSET if !MMU
 	default 0x40000000 if VMSPLIT_1G
 	default 0x80000000 if VMSPLIT_2G
 	default 0xC0000000
@@ -1900,6 +1902,7 @@ config XEN
 	depends on ARM && AEABI && OF
 	depends on CPU_V7 && !CPU_V6
 	depends on !GENERIC_ATOMIC64
+	depends on MMU
 	select ARM_PSCI
 	select SWIOTLB_XEN
 	select ARCH_DMA_ADDR_T_64BIT

arch/arm/boot/compressed/.gitignore

@@ -1,4 +1,5 @@
 ashldi3.S
+bswapsdi2.S
 font.c
 lib1funcs.S
 hyp-stub.S

arch/arm/boot/dts/bcm11351.dtsi

@@ -147,7 +147,7 @@
 	};
 
 	pinctrl@35004800 {
-		compatible = "brcm,capri-pinctrl";
+		compatible = "brcm,bcm11351-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
 

arch/arm/boot/dts/keystone-clocks.dtsi

@@ -612,7 +612,7 @@ clocks {
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
 		clock-output-names = "vcp-3";
-		reg = <0x0235000a8 0xb00>, <0x02350060 0x400>;
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
 		reg-names = "control", "domain";
 		domain-id = <24>;
 	};

arch/arm/boot/dts/omap3-gta04.dts

@@ -13,7 +13,7 @@
 
 / {
 	model = "OMAP3 GTA04";
-	compatible = "ti,omap3-gta04", "ti,omap3";
+	compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {

arch/arm/boot/dts/omap3-igep0020.dts

@@ -14,7 +14,7 @@
 
 / {
 	model = "IGEPv2 (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap3";
+	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
 
 	leds {
 		pinctrl-names = "default";

arch/arm/boot/dts/omap3-igep0030.dts

@@ -13,7 +13,7 @@
 
 / {
 	model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap3";
+	compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
 
 	leds {
 		pinctrl-names = "default";

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -426,7 +426,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -383,7 +383,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -346,7 +346,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -454,7 +454,7 @@
 		rtc: rtc@01c20d00 {
 			compatible = "allwinner,sun7i-a20-rtc";
 			reg = <0x01c20d00 0x20>;
-			interrupts = <0 24 1>;
+			interrupts = <0 24 4>;
 		};
 
 		sid: eeprom@01c23800 {
@@ -463,7 +463,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <0 29 4>;
 		};
@@ -596,10 +596,10 @@
 		hstimer@01c60000 {
 			compatible = "allwinner,sun7i-a20-hstimer";
 			reg = <0x01c60000 0x1000>;
-			interrupts = <0 81 1>,
-				     <0 82 1>,
-				     <0 83 1>,
-				     <0 84 1>;
+			interrupts = <0 81 4>,
+				     <0 82 4>,
+				     <0 83 4>,
+				     <0 84 4>;
 			clocks = <&ahb_gates 28>;
 		};
 

arch/arm/configs/tegra_defconfig

@@ -204,7 +204,10 @@ CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y

arch/arm/include/asm/memory.h

@@ -30,14 +30,15 @@
  */
 #define UL(x) _AC(x, UL)
 
+/* PAGE_OFFSET - the virtual address of the start of the kernel image */
+#define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
+
 #ifdef CONFIG_MMU
 
 /*
- * PAGE_OFFSET - the virtual address of the start of the kernel image
  * TASK_SIZE - the maximum size of a user space task.
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
  */
-#define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
 #define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M))
 #define TASK_UNMAPPED_BASE	ALIGN(TASK_SIZE / 3, SZ_16M)
 
@@ -104,10 +105,6 @@
 #define END_MEM     		(UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
 #endif
 
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET		PLAT_PHYS_OFFSET
-#endif
-
 /*
  * The module can be at any place in ram in nommu mode.
  */

arch/arm/kernel/head-common.S

@@ -177,6 +177,18 @@ __lookup_processor_type_data:
 	.long	__proc_info_end
 	.size	__lookup_processor_type_data, . - __lookup_processor_type_data
 
+__error_lpae:
+#ifdef CONFIG_DEBUG_LL
+	adr	r0, str_lpae
+	bl 	printascii
+	b	__error
+str_lpae: .asciz "\nError: Kernel with LPAE support, but CPU does not support LPAE.\n"
+#else
+	b	__error
+#endif
+	.align
+ENDPROC(__error_lpae)
+
 __error_p:
 #ifdef CONFIG_DEBUG_LL
 	adr	r0, str_p1

arch/arm/kernel/head.S

@@ -102,7 +102,7 @@ ENTRY(stext)
 	and	r3, r3, #0xf			@ extract VMSA support
 	cmp	r3, #5				@ long-descriptor translation table format?
  THUMB( it	lo )				@ force fixup-able long branch encoding
-	blo	__error_p			@ only classic page table format
+	blo	__error_lpae			@ only classic page table format
 #endif
 
 #ifndef CONFIG_XIP_KERNEL

arch/arm/mach-omap2/cclock3xxx_data.c

@@ -433,7 +433,9 @@ static const struct clk_ops dpll4_m5x2_ck_ops = {
 	.enable		= &omap2_dflt_clk_enable,
 	.disable	= &omap2_dflt_clk_disable,
 	.is_enabled	= &omap2_dflt_clk_is_enabled,
+	.set_rate	= &omap3_clkoutx2_set_rate,
 	.recalc_rate	= &omap3_clkoutx2_recalc,
+	.round_rate	= &omap3_clkoutx2_round_rate,
 };
 
 static const struct clk_ops dpll4_m5x2_ck_3630_ops = {

arch/arm/mach-omap2/cpuidle44xx.c

@@ -23,6 +23,8 @@
 #include "prm.h"
 #include "clockdomain.h"
 
+#define MAX_CPUS	2
+
 /* Machine specific information */
 struct idle_statedata {
 	u32 cpu_state;
@@ -48,11 +50,11 @@ static struct idle_statedata omap4_idle_data[] = {
 	},
 };
 
-static struct powerdomain *mpu_pd, *cpu_pd[NR_CPUS];
-static struct clockdomain *cpu_clkdm[NR_CPUS];
+static struct powerdomain *mpu_pd, *cpu_pd[MAX_CPUS];
+static struct clockdomain *cpu_clkdm[MAX_CPUS];
 
 static atomic_t abort_barrier;
-static bool cpu_done[NR_CPUS];
+static bool cpu_done[MAX_CPUS];
 static struct idle_statedata *state_ptr = &omap4_idle_data[0];
 
 /* Private functions */

arch/arm/mach-omap2/dpll3xxx.c

@@ -623,6 +623,32 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
 
 /* Clock control for DPLL outputs */
 
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
+{
+	struct clk_hw_omap *pclk = NULL;
+	struct clk *parent;
+
+	/* Walk up the parents of clk, looking for a DPLL */
+	do {
+		do {
+			parent = __clk_get_parent(hw->clk);
+			hw = __clk_get_hw(parent);
+		} while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
+		if (!hw)
+			break;
+		pclk = to_clk_hw_omap(hw);
+	} while (pclk && !pclk->dpll_data);
+
+	/* clk does not have a DPLL as a parent?  error in the clock data */
+	if (!pclk) {
+		WARN_ON(1);
+		return NULL;
+	}
+
+	return pclk;
+}
+
 /**
  * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
  * @clk: DPLL output struct clk
@@ -637,27 +663,14 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	unsigned long rate;
 	u32 v;
 	struct clk_hw_omap *pclk = NULL;
-	struct clk *parent;
 
 	if (!parent_rate)
 		return 0;
 
-	/* Walk up the parents of clk, looking for a DPLL */
-	do {
-		do {
-			parent = __clk_get_parent(hw->clk);
-			hw = __clk_get_hw(parent);
-		} while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
-		if (!hw)
-			break;
-		pclk = to_clk_hw_omap(hw);
-	} while (pclk && !pclk->dpll_data);
+	pclk = omap3_find_clkoutx2_dpll(hw);
 
-	/* clk does not have a DPLL as a parent?  error in the clock data */
-	if (!pclk) {
-		WARN_ON(1);
+	if (!pclk)
 		return 0;
-	}
 
 	dd = pclk->dpll_data;
 
@@ -672,6 +685,55 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	return rate;
 }
 
+int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long parent_rate)
+{
+	return 0;
+}
+
+long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	const struct dpll_data *dd;
+	u32 v;
+	struct clk_hw_omap *pclk = NULL;
+
+	if (!*prate)
+		return 0;
+
+	pclk = omap3_find_clkoutx2_dpll(hw);
+
+	if (!pclk)
+		return 0;
+
+	dd = pclk->dpll_data;
+
+	/* TYPE J does not have a clkoutx2 */
+	if (dd->flags & DPLL_J_TYPE) {
+		*prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
+		return *prate;
+	}
+
+	WARN_ON(!dd->enable_mask);
+
+	v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	/* If in bypass, the rate is fixed to the bypass rate*/
+	if (v != OMAP3XXX_EN_DPLL_LOCKED)
+		return *prate;
+
+	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+		unsigned long best_parent;
+
+		best_parent = (rate / 2);
+		*prate = __clk_round_rate(__clk_get_parent(hw->clk),
+				best_parent);
+	}
+
+	return *prate * 2;
+}
+
 /* OMAP3/4 non-CORE DPLL clkops */
 const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
 	.allow_idle	= omap3_dpll_allow_idle,

arch/arm/mach-omap2/omap_hwmod.c

@@ -1946,30 +1946,32 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 	if (ret)
 		goto dis_opt_clks;
 
-	_write_sysconfig(v, oh);
-	ret = _clear_softreset(oh, &v);
-	if (ret)
-		goto dis_opt_clks;
-
 	_write_sysconfig(v, oh);
 
 	if (oh->class->sysc->srst_udelay)
 		udelay(oh->class->sysc->srst_udelay);
 
 	c = _wait_softreset_complete(oh);
-	if (c == MAX_MODULE_SOFTRESET_WAIT)
+	if (c == MAX_MODULE_SOFTRESET_WAIT) {
 		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
 			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
-	else
+		ret = -ETIMEDOUT;
+		goto dis_opt_clks;
+	} else {
 		pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
+	}
+
+	ret = _clear_softreset(oh, &v);
+	if (ret)
+		goto dis_opt_clks;
+
+	_write_sysconfig(v, oh);
 
 	/*
 	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
 	 * _wait_target_ready() or _reset()
 	 */
 
-	ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
-
 dis_opt_clks:
 	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
 		_disable_optional_clocks(oh);

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -1365,11 +1365,10 @@ static struct omap_hwmod_class_sysconfig dra7xx_spinlock_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 

arch/arm/mach-omap2/pdata-quirks.c

@@ -22,6 +22,8 @@
 #include "common-board-devices.h"
 #include "dss-common.h"
 #include "control.h"
+#include "omap-secure.h"
+#include "soc.h"
 
 struct pdata_init {
 	const char *compatible;
@@ -169,6 +171,22 @@ static void __init am3517_evm_legacy_init(void)
 	omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
 	omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
 }
+
+static void __init nokia_n900_legacy_init(void)
+{
+	hsmmc2_internal_input_clk();
+
+	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+		if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
+			pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
+			/* set IBE to 1 */
+			rx51_secure_update_aux_cr(BIT(6), 0);
+		} else {
+			pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n");
+			pr_warning("Thumb binaries may crash randomly without this workaround\n");
+		}
+	}
+}
 #endif /* CONFIG_ARCH_OMAP3 */
 
 #ifdef CONFIG_ARCH_OMAP4
@@ -239,6 +257,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 #endif
 #ifdef CONFIG_ARCH_OMAP3
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
 	/* Only on am3517 */
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
@@ -259,7 +278,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 static struct pdata_init pdata_quirks[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP3
 	{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
-	{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
+	{ "nokia,omap3-n900", nokia_n900_legacy_init, },
 	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
 	{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },

arch/arm/mach-omap2/prminst44xx.c

@@ -183,11 +183,11 @@ void omap4_prminst_global_warm_sw_reset(void)
 					OMAP4_PRM_RSTCTRL_OFFSET);
 	v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
 	omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
-				 OMAP4430_PRM_DEVICE_INST,
+				 dev_inst,
 				 OMAP4_PRM_RSTCTRL_OFFSET);
 
 	/* OCP barrier */
 	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-				    OMAP4430_PRM_DEVICE_INST,
+				    dev_inst,
 				    OMAP4_PRM_RSTCTRL_OFFSET);
 }

arch/arm/mach-sa1100/include/mach/collie.h

@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_COLLIE_H
 #define __ASM_ARCH_COLLIE_H
 
+#include "hardware.h" /* Gives GPIO_MAX */
+
 extern void locomolcd_power(int on);
 
 #define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)

arch/arm/mm/dump.c

@@ -264,6 +264,9 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
 			note_page(st, addr, 3, pmd_val(*pmd));
 		else
 			walk_pte(st, pmd, addr);
+
+		if (SECTION_SIZE < PMD_SIZE && pmd_large(pmd[1]))
+			note_page(st, addr + SECTION_SIZE, 3, pmd_val(pmd[1]));
 	}
 }
 

arch/c6x/include/asm/cache.h

@@ -12,6 +12,7 @@
 #define _ASM_C6X_CACHE_H
 
 #include <linux/irqflags.h>
+#include <linux/init.h>
 
 /*
  * Cache line size

arch/powerpc/kernel/process.c

@@ -1048,6 +1048,15 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	flush_altivec_to_thread(src);
 	flush_vsx_to_thread(src);
 	flush_spe_to_thread(src);
+	/*
+	 * Flush TM state out so we can copy it.  __switch_to_tm() does this
+	 * flush but it removes the checkpointed state from the current CPU and
+	 * transitions the CPU out of TM mode.  Hence we need to call
+	 * tm_recheckpoint_new_task() (on the same task) to restore the
+	 * checkpointed state back and the TM mode.
+	 */
+	__switch_to_tm(src);
+	tm_recheckpoint_new_task(src);
 
 	*dst = *src;
 

arch/powerpc/kernel/reloc_64.S

@@ -81,6 +81,7 @@ _GLOBAL(relocate)
 
 6:	blr
 
+.balign 8
 p_dyn:	.llong	__dynamic_start - 0b
 p_rela:	.llong	__rela_dyn_start - 0b
 p_st:	.llong	_stext - 0b

arch/sh/include/cpu-sh2/cpu/cache.h

@@ -18,7 +18,7 @@
 #define SH_CACHE_ASSOC		8
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define CCR		0xffffffec
+#define SH_CCR		0xffffffec
 
 #define CCR_CACHE_CE	0x01	/* Cache enable */
 #define CCR_CACHE_WT	0x02    /* CCR[bit1=1,bit2=1] */

arch/sh/include/cpu-sh2a/cpu/cache.h

@@ -17,8 +17,8 @@
 #define SH_CACHE_COMBINED	4
 #define SH_CACHE_ASSOC		8
 
-#define CCR		0xfffc1000 /* CCR1 */
-#define CCR2		0xfffc1004
+#define SH_CCR		0xfffc1000 /* CCR1 */
+#define SH_CCR2		0xfffc1004
 
 /*
  * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not

arch/sh/include/cpu-sh3/cpu/cache.h

@@ -17,7 +17,7 @@
 #define SH_CACHE_COMBINED	4
 #define SH_CACHE_ASSOC		8
 
-#define CCR		0xffffffec	/* Address of Cache Control Register */
+#define SH_CCR		0xffffffec	/* Address of Cache Control Register */
 
 #define CCR_CACHE_CE	0x01	/* Cache Enable */
 #define CCR_CACHE_WT	0x02	/* Write-Through (for P0,U0,P3) (else writeback) */

arch/sh/include/cpu-sh4/cpu/cache.h

@@ -17,7 +17,7 @@
 #define SH_CACHE_COMBINED	4
 #define SH_CACHE_ASSOC		8
 
-#define CCR		0xff00001c	/* Address of Cache Control Register */
+#define SH_CCR		0xff00001c	/* Address of Cache Control Register */
 #define CCR_CACHE_OCE	0x0001	/* Operand Cache Enable */
 #define CCR_CACHE_WT	0x0002	/* Write-Through (for P0,U0,P3) (else writeback)*/
 #define CCR_CACHE_CB	0x0004	/* Copy-Back (for P1) (else writethrough) */

arch/sh/kernel/cpu/init.c

@@ -112,7 +112,7 @@ static void cache_init(void)
 	unsigned long ccr, flags;
 
 	jump_to_uncached();
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 
 	/*
 	 * At this point we don't know whether the cache is enabled or not - a
@@ -189,7 +189,7 @@ static void cache_init(void)
 
 	l2_cache_init();
 
-	__raw_writel(flags, CCR);
+	__raw_writel(flags, SH_CCR);
 	back_to_cached();
 }
 #else

arch/sh/mm/cache-debugfs.c

@@ -36,7 +36,7 @@ static int cache_seq_show(struct seq_file *file, void *iter)
 	 */
 	jump_to_uncached();
 
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 	if ((ccr & CCR_CACHE_ENABLE) == 0) {
 		back_to_cached();
 

arch/sh/mm/cache-sh2.c

@@ -63,9 +63,9 @@ static void sh2__flush_invalidate_region(void *start, int size)
 	local_irq_save(flags);
 	jump_to_uncached();
 
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 	ccr |= CCR_CACHE_INVALIDATE;
-	__raw_writel(ccr, CCR);
+	__raw_writel(ccr, SH_CCR);
 
 	back_to_cached();
 	local_irq_restore(flags);

arch/sh/mm/cache-sh2a.c

@@ -134,7 +134,8 @@ static void sh2a__flush_invalidate_region(void *start, int size)
 
 	/* If there are too many pages then just blow the cache */
 	if (((end - begin) >> PAGE_SHIFT) >= MAX_OCACHE_PAGES) {
-		__raw_writel(__raw_readl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
+		__raw_writel(__raw_readl(SH_CCR) | CCR_OCACHE_INVALIDATE,
+			     SH_CCR);
 	} else {
 		for (v = begin; v < end; v += L1_CACHE_BYTES)
 			sh2a_invalidate_line(CACHE_OC_ADDRESS_ARRAY, v);
@@ -167,7 +168,8 @@ static void sh2a_flush_icache_range(void *args)
 	/* I-Cache invalidate */
 	/* If there are too many pages then just blow the cache */
 	if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
-		__raw_writel(__raw_readl(CCR) | CCR_ICACHE_INVALIDATE, CCR);
+		__raw_writel(__raw_readl(SH_CCR) | CCR_ICACHE_INVALIDATE,
+			     SH_CCR);
 	} else {
 		for (v = start; v < end; v += L1_CACHE_BYTES)
 			sh2a_invalidate_line(CACHE_IC_ADDRESS_ARRAY, v);

arch/sh/mm/cache-sh4.c

@@ -133,9 +133,9 @@ static void flush_icache_all(void)
 	jump_to_uncached();
 
 	/* Flush I-cache */
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 	ccr |= CCR_CACHE_ICI;
-	__raw_writel(ccr, CCR);
+	__raw_writel(ccr, SH_CCR);
 
 	/*
 	 * back_to_cached() will take care of the barrier for us, don't add

arch/sh/mm/cache-shx3.c

@@ -19,7 +19,7 @@ void __init shx3_cache_init(void)
 {
 	unsigned int ccr;
 
-	ccr = __raw_readl(CCR);
+	ccr = __raw_readl(SH_CCR);
 
 	/*
 	 * If we've got cache aliases, resolve them in hardware.
@@ -40,5 +40,5 @@ void __init shx3_cache_init(void)
 	ccr |= CCR_CACHE_IBE;
 #endif
 
-	writel_uncached(ccr, CCR);
+	writel_uncached(ccr, SH_CCR);
 }

arch/sh/mm/cache.c

@@ -285,8 +285,8 @@ void __init cpu_cache_init(void)
 {
 	unsigned int cache_disabled = 0;
 
-#ifdef CCR
-	cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE);
+#ifdef SH_CCR
+	cache_disabled = !(__raw_readl(SH_CCR) & CCR_CACHE_ENABLE);
 #endif
 
 	compute_alias(&boot_cpu_data.icache);

arch/x86/include/asm/efi.h

@@ -134,6 +134,7 @@ extern void efi_setup_page_tables(void);
 extern void __init old_map_region(efi_memory_desc_t *md);
 extern void __init runtime_code_page_mkexec(void);
 extern void __init efi_runtime_mkexec(void);
+extern void __init efi_apply_memmap_quirks(void);
 
 struct efi_setup_data {
 	u64 fw_vendor;

arch/x86/kernel/head_32.S

@@ -544,6 +544,10 @@ ENDPROC(early_idt_handlers)
 	/* This is global to keep gas from relaxing the jumps */
 ENTRY(early_idt_handler)
 	cld
+
+	cmpl $2,(%esp)		# X86_TRAP_NMI
+	je is_nmi		# Ignore NMI
+
 	cmpl $2,%ss:early_recursion_flag
 	je hlt_loop
 	incl %ss:early_recursion_flag
@@ -594,8 +598,9 @@ ex_entry:
 	pop %edx
 	pop %ecx
 	pop %eax
-	addl $8,%esp		/* drop vector number and error code */
 	decl %ss:early_recursion_flag
+is_nmi:
+	addl $8,%esp		/* drop vector number and error code */
 	iret
 ENDPROC(early_idt_handler)
 

arch/x86/kernel/head_64.S

@@ -343,6 +343,9 @@ early_idt_handlers:
 ENTRY(early_idt_handler)
 	cld
 
+	cmpl $2,(%rsp)		# X86_TRAP_NMI
+	je is_nmi		# Ignore NMI
+
 	cmpl $2,early_recursion_flag(%rip)
 	jz  1f
 	incl early_recursion_flag(%rip)
@@ -405,8 +408,9 @@ ENTRY(early_idt_handler)
 	popq %rdx
 	popq %rcx
 	popq %rax
-	addq $16,%rsp		# drop vector number and error code
 	decl early_recursion_flag(%rip)
+is_nmi:
+	addq $16,%rsp		# drop vector number and error code
 	INTERRUPT_RETURN
 ENDPROC(early_idt_handler)
 

arch/x86/kernel/setup.c

@@ -1239,14 +1239,8 @@ void __init setup_arch(char **cmdline_p)
 	register_refined_jiffies(CLOCK_TICK_RATE);
 
 #ifdef CONFIG_EFI
-	/* Once setup is done above, unmap the EFI memory map on
-	 * mismatched firmware/kernel archtectures since there is no
-	 * support for runtime services.
-	 */
-	if (efi_enabled(EFI_BOOT) && !efi_is_native()) {
-		pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n");
-		efi_unmap_memmap();
-	}
+	if (efi_enabled(EFI_BOOT))
+		efi_apply_memmap_quirks();
 #endif
 }
 

arch/x86/mm/fault.c

@@ -1020,13 +1020,17 @@ static inline bool smap_violation(int error_code, struct pt_regs *regs)
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
  * routines.
+ *
+ * This function must have noinline because both callers
+ * {,trace_}do_page_fault() have notrace on. Having this an actual function
+ * guarantees there's a function trace entry.
  */
-static void __kprobes
-__do_page_fault(struct pt_regs *regs, unsigned long error_code)
+static void __kprobes noinline
+__do_page_fault(struct pt_regs *regs, unsigned long error_code,
+		unsigned long address)
 {
 	struct vm_area_struct *vma;
 	struct task_struct *tsk;
-	unsigned long address;
 	struct mm_struct *mm;
 	int fault;
 	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
@@ -1034,9 +1038,6 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	tsk = current;
 	mm = tsk->mm;
 
-	/* Get the faulting address: */
-	address = read_cr2();
-
 	/*
 	 * Detect and handle instructions that would cause a page fault for
 	 * both a tracked kernel page and a userspace page.
@@ -1248,32 +1249,50 @@ good_area:
 	up_read(&mm->mmap_sem);
 }
 
-dotraplinkage void __kprobes
+dotraplinkage void __kprobes notrace
 do_page_fault(struct pt_regs *regs, unsigned long error_code)
 {
+	unsigned long address = read_cr2(); /* Get the faulting address */
 	enum ctx_state prev_state;
 
+	/*
+	 * We must have this function tagged with __kprobes, notrace and call
+	 * read_cr2() before calling anything else. To avoid calling any kind
+	 * of tracing machinery before we've observed the CR2 value.
+	 *
+	 * exception_{enter,exit}() contain all sorts of tracepoints.
+	 */
+
 	prev_state = exception_enter();
-	__do_page_fault(regs, error_code);
+	__do_page_fault(regs, error_code, address);
 	exception_exit(prev_state);
 }
 
-static void trace_page_fault_entries(struct pt_regs *regs,
+#ifdef CONFIG_TRACING
+static void trace_page_fault_entries(unsigned long address, struct pt_regs *regs,
 				     unsigned long error_code)
 {
 	if (user_mode(regs))
-		trace_page_fault_user(read_cr2(), regs, error_code);
+		trace_page_fault_user(address, regs, error_code);
 	else
-		trace_page_fault_kernel(read_cr2(), regs, error_code);
+		trace_page_fault_kernel(address, regs, error_code);
 }
 
-dotraplinkage void __kprobes
+dotraplinkage void __kprobes notrace
 trace_do_page_fault(struct pt_regs *regs, unsigned long error_code)
 {
+	/*
+	 * The exception_enter and tracepoint processing could
+	 * trigger another page faults (user space callchain
+	 * reading) and destroy the original cr2 value, so read
+	 * the faulting address now.
+	 */
+	unsigned long address = read_cr2();
 	enum ctx_state prev_state;
 
 	prev_state = exception_enter();
-	trace_page_fault_entries(regs, error_code);
-	__do_page_fault(regs, error_code);
+	trace_page_fault_entries(address, regs, error_code);
+	__do_page_fault(regs, error_code, address);
 	exception_exit(prev_state);
 }
+#endif /* CONFIG_TRACING */

arch/x86/platform/efi/efi.c

@@ -52,6 +52,7 @@
 #include <asm/tlbflush.h>
 #include <asm/x86_init.h>
 #include <asm/rtc.h>
+#include <asm/uv/uv.h>
 
 #define EFI_DEBUG
 
@@ -1210,3 +1211,22 @@ static int __init parse_efi_cmdline(char *str)
 	return 0;
 }
 early_param("efi", parse_efi_cmdline);
+
+void __init efi_apply_memmap_quirks(void)
+{
+	/*
+	 * Once setup is done earlier, unmap the EFI memory map on mismatched
+	 * firmware/kernel architectures since there is no support for runtime
+	 * services.
+	 */
+	if (!efi_is_native()) {
+		pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n");
+		efi_unmap_memmap();
+	}
+
+	/*
+	 * UV doesn't support the new EFI pagetable mapping yet.
+	 */
+	if (is_uv_system())
+		set_bit(EFI_OLD_MEMMAP, &x86_efi_facility);
+}

block/blk-exec.c

@@ -65,7 +65,7 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk,
 	 * be resued after dying flag is set
 	 */
 	if (q->mq_ops) {
-		blk_mq_insert_request(q, rq, at_head, true);
+		blk_mq_insert_request(rq, at_head, true, false);
 		return;
 	}
 

block/blk-flush.c

@@ -137,7 +137,7 @@ static void mq_flush_run(struct work_struct *work)
 	rq = container_of(work, struct request, mq_flush_work);
 
 	memset(&rq->csd, 0, sizeof(rq->csd));
-	blk_mq_run_request(rq, true, false);
+	blk_mq_insert_request(rq, false, true, false);
 }
 
 static bool blk_flush_queue_rq(struct request *rq)
@@ -411,7 +411,7 @@ void blk_insert_flush(struct request *rq)
 	if ((policy & REQ_FSEQ_DATA) &&
 	    !(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) {
 		if (q->mq_ops) {
-			blk_mq_run_request(rq, false, true);
+			blk_mq_insert_request(rq, false, false, true);
 		} else
 			list_add_tail(&rq->queuelist, &q->queue_head);
 		return;

block/blk-mq-cpu.c

@@ -11,7 +11,7 @@
 #include "blk-mq.h"
 
 static LIST_HEAD(blk_mq_cpu_notify_list);
-static DEFINE_SPINLOCK(blk_mq_cpu_notify_lock);
+static DEFINE_RAW_SPINLOCK(blk_mq_cpu_notify_lock);
 
 static int blk_mq_main_cpu_notify(struct notifier_block *self,
 				  unsigned long action, void *hcpu)
@@ -19,12 +19,12 @@ static int blk_mq_main_cpu_notify(struct notifier_block *self,
 	unsigned int cpu = (unsigned long) hcpu;
 	struct blk_mq_cpu_notifier *notify;
 
-	spin_lock(&blk_mq_cpu_notify_lock);
+	raw_spin_lock(&blk_mq_cpu_notify_lock);
 
 	list_for_each_entry(notify, &blk_mq_cpu_notify_list, list)
 		notify->notify(notify->data, action, cpu);
 
-	spin_unlock(&blk_mq_cpu_notify_lock);
+	raw_spin_unlock(&blk_mq_cpu_notify_lock);
 	return NOTIFY_OK;
 }
 
@@ -32,16 +32,16 @@ void blk_mq_register_cpu_notifier(struct blk_mq_cpu_notifier *notifier)
 {
 	BUG_ON(!notifier->notify);
 
-	spin_lock(&blk_mq_cpu_notify_lock);
+	raw_spin_lock(&blk_mq_cpu_notify_lock);
 	list_add_tail(&notifier->list, &blk_mq_cpu_notify_list);
-	spin_unlock(&blk_mq_cpu_notify_lock);
+	raw_spin_unlock(&blk_mq_cpu_notify_lock);
 }
 
 void blk_mq_unregister_cpu_notifier(struct blk_mq_cpu_notifier *notifier)
 {
-	spin_lock(&blk_mq_cpu_notify_lock);
+	raw_spin_lock(&blk_mq_cpu_notify_lock);
 	list_del(&notifier->list);
-	spin_unlock(&blk_mq_cpu_notify_lock);
+	raw_spin_unlock(&blk_mq_cpu_notify_lock);
 }
 
 void blk_mq_init_cpu_notifier(struct blk_mq_cpu_notifier *notifier,

block/blk-mq.c

@@ -73,8 +73,8 @@ static void blk_mq_hctx_mark_pending(struct blk_mq_hw_ctx *hctx,
 		set_bit(ctx->index_hw, hctx->ctx_map);
 }
 
-static struct request *blk_mq_alloc_rq(struct blk_mq_hw_ctx *hctx, gfp_t gfp,
-				       bool reserved)
+static struct request *__blk_mq_alloc_request(struct blk_mq_hw_ctx *hctx,
+					      gfp_t gfp, bool reserved)
 {
 	struct request *rq;
 	unsigned int tag;
@@ -193,12 +193,6 @@ static void blk_mq_rq_ctx_init(struct request_queue *q, struct blk_mq_ctx *ctx,
 	ctx->rq_dispatched[rw_is_sync(rw_flags)]++;
 }
 
-static struct request *__blk_mq_alloc_request(struct blk_mq_hw_ctx *hctx,
-					      gfp_t gfp, bool reserved)
-{
-	return blk_mq_alloc_rq(hctx, gfp, reserved);
-}
-
 static struct request *blk_mq_alloc_request_pinned(struct request_queue *q,
 						   int rw, gfp_t gfp,
 						   bool reserved)
@@ -289,38 +283,10 @@ void blk_mq_free_request(struct request *rq)
 	__blk_mq_free_request(hctx, ctx, rq);
 }
 
-static void blk_mq_bio_endio(struct request *rq, struct bio *bio, int error)
-{
-	if (error)
-		clear_bit(BIO_UPTODATE, &bio->bi_flags);
-	else if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
-		error = -EIO;
-
-	if (unlikely(rq->cmd_flags & REQ_QUIET))
-		set_bit(BIO_QUIET, &bio->bi_flags);
-
-	/* don't actually finish bio if it's part of flush sequence */
-	if (!(rq->cmd_flags & REQ_FLUSH_SEQ))
-		bio_endio(bio, error);
-}
-
-void blk_mq_end_io(struct request *rq, int error)
+bool blk_mq_end_io_partial(struct request *rq, int error, unsigned int nr_bytes)
 {
-	struct bio *bio = rq->bio;
-	unsigned int bytes = 0;
-
-	trace_block_rq_complete(rq->q, rq);
-
-	while (bio) {
-		struct bio *next = bio->bi_next;
-
-		bio->bi_next = NULL;
-		bytes += bio->bi_iter.bi_size;
-		blk_mq_bio_endio(rq, bio, error);
-		bio = next;
-	}
-
-	blk_account_io_completion(rq, bytes);
+	if (blk_update_request(rq, error, blk_rq_bytes(rq)))
+		return true;
 
 	blk_account_io_done(rq);
 
@@ -328,8 +294,9 @@ void blk_mq_end_io(struct request *rq, int error)
 		rq->end_io(rq, error);
 	else
 		blk_mq_free_request(rq);
+	return false;
 }
-EXPORT_SYMBOL(blk_mq_end_io);
+EXPORT_SYMBOL(blk_mq_end_io_partial);
 
 static void __blk_mq_complete_request_remote(void *data)
 {
@@ -730,60 +697,27 @@ static void __blk_mq_insert_request(struct blk_mq_hw_ctx *hctx,
 	blk_mq_add_timer(rq);
 }
 
-void blk_mq_insert_request(struct request_queue *q, struct request *rq,
-			   bool at_head, bool run_queue)
+void blk_mq_insert_request(struct request *rq, bool at_head, bool run_queue,
+		bool async)
 {
+	struct request_queue *q = rq->q;
 	struct blk_mq_hw_ctx *hctx;
-	struct blk_mq_ctx *ctx, *current_ctx;
+	struct blk_mq_ctx *ctx = rq->mq_ctx, *current_ctx;
+
+	current_ctx = blk_mq_get_ctx(q);
+	if (!cpu_online(ctx->cpu))
+		rq->mq_ctx = ctx = current_ctx;
 
-	ctx = rq->mq_ctx;
 	hctx = q->mq_ops->map_queue(q, ctx->cpu);
 
-	if (rq->cmd_flags & (REQ_FLUSH | REQ_FUA)) {
+	if (rq->cmd_flags & (REQ_FLUSH | REQ_FUA) &&
+	    !(rq->cmd_flags & (REQ_FLUSH_SEQ))) {
 		blk_insert_flush(rq);
 	} else {
-		current_ctx = blk_mq_get_ctx(q);
-
-		if (!cpu_online(ctx->cpu)) {
-			ctx = current_ctx;
-			hctx = q->mq_ops->map_queue(q, ctx->cpu);
-			rq->mq_ctx = ctx;
-		}
 		spin_lock(&ctx->lock);
 		__blk_mq_insert_request(hctx, rq, at_head);
 		spin_unlock(&ctx->lock);
-
-		blk_mq_put_ctx(current_ctx);
-	}
-
-	if (run_queue)
-		__blk_mq_run_hw_queue(hctx);
-}
-EXPORT_SYMBOL(blk_mq_insert_request);
-
-/*
- * This is a special version of blk_mq_insert_request to bypass FLUSH request
- * check. Should only be used internally.
- */
-void blk_mq_run_request(struct request *rq, bool run_queue, bool async)
-{
-	struct request_queue *q = rq->q;
-	struct blk_mq_hw_ctx *hctx;
-	struct blk_mq_ctx *ctx, *current_ctx;
-
-	current_ctx = blk_mq_get_ctx(q);
-
-	ctx = rq->mq_ctx;
-	if (!cpu_online(ctx->cpu)) {
-		ctx = current_ctx;
-		rq->mq_ctx = ctx;
 	}
-	hctx = q->mq_ops->map_queue(q, ctx->cpu);
-
-	/* ctx->cpu might be offline */
-	spin_lock(&ctx->lock);
-	__blk_mq_insert_request(hctx, rq, false);
-	spin_unlock(&ctx->lock);
 
 	blk_mq_put_ctx(current_ctx);
 
@@ -926,6 +860,8 @@ static void blk_mq_make_request(struct request_queue *q, struct bio *bio)
 	ctx = blk_mq_get_ctx(q);
 	hctx = q->mq_ops->map_queue(q, ctx->cpu);
 
+	if (is_sync)
+		rw |= REQ_SYNC;
 	trace_block_getrq(q, bio, rw);
 	rq = __blk_mq_alloc_request(hctx, GFP_ATOMIC, false);
 	if (likely(rq))

block/blk-mq.h

@@ -23,7 +23,6 @@ struct blk_mq_ctx {
 };
 
 void __blk_mq_complete_request(struct request *rq);
-void blk_mq_run_request(struct request *rq, bool run_queue, bool async);
 void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async);
 void blk_mq_init_flush(struct request_queue *q);
 void blk_mq_drain_queue(struct request_queue *q);

drivers/acpi/ec.c

@@ -67,6 +67,8 @@ enum ec_command {
 #define ACPI_EC_DELAY		500	/* Wait 500ms max. during EC ops */
 #define ACPI_EC_UDELAY_GLK	1000	/* Wait 1ms max. to get global lock */
 #define ACPI_EC_MSI_UDELAY	550	/* Wait 550us for MSI EC */
+#define ACPI_EC_CLEAR_MAX	100	/* Maximum number of events to query
+					 * when trying to clear the EC */
 
 enum {
 	EC_FLAGS_QUERY_PENDING,		/* Query is pending */
@@ -116,6 +118,7 @@ EXPORT_SYMBOL(first_ec);
 static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */
 static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */
 static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */
+static int EC_FLAGS_CLEAR_ON_RESUME; /* Needs acpi_ec_clear() on boot/resume */
 
 /* --------------------------------------------------------------------------
                              Transaction Management
@@ -440,6 +443,29 @@ acpi_handle ec_get_handle(void)
 
 EXPORT_SYMBOL(ec_get_handle);
 
+static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 *data);
+
+/*
+ * Clears stale _Q events that might have accumulated in the EC.
+ * Run with locked ec mutex.
+ */
+static void acpi_ec_clear(struct acpi_ec *ec)
+{
+	int i, status;
+	u8 value = 0;
+
+	for (i = 0; i < ACPI_EC_CLEAR_MAX; i++) {
+		status = acpi_ec_query_unlocked(ec, &value);
+		if (status || !value)
+			break;
+	}
+
+	if (unlikely(i == ACPI_EC_CLEAR_MAX))
+		pr_warn("Warning: Maximum of %d stale EC events cleared\n", i);
+	else
+		pr_info("%d stale EC events cleared\n", i);
+}
+
 void acpi_ec_block_transactions(void)
 {
 	struct acpi_ec *ec = first_ec;
@@ -463,6 +489,10 @@ void acpi_ec_unblock_transactions(void)
 	mutex_lock(&ec->mutex);
 	/* Allow transactions to be carried out again */
 	clear_bit(EC_FLAGS_BLOCKED, &ec->flags);
+
+	if (EC_FLAGS_CLEAR_ON_RESUME)
+		acpi_ec_clear(ec);
+
 	mutex_unlock(&ec->mutex);
 }
 
@@ -821,6 +851,13 @@ static int acpi_ec_add(struct acpi_device *device)
 
 	/* EC is fully operational, allow queries */
 	clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
+
+	/* Clear stale _Q events if hardware might require that */
+	if (EC_FLAGS_CLEAR_ON_RESUME) {
+		mutex_lock(&ec->mutex);
+		acpi_ec_clear(ec);
+		mutex_unlock(&ec->mutex);
+	}
 	return ret;
 }
 
@@ -922,6 +959,30 @@ static int ec_enlarge_storm_threshold(const struct dmi_system_id *id)
 	return 0;
 }
 
+/*
+ * On some hardware it is necessary to clear events accumulated by the EC during
+ * sleep. These ECs stop reporting GPEs until they are manually polled, if too
+ * many events are accumulated. (e.g. Samsung Series 5/9 notebooks)
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=44161
+ *
+ * Ideally, the EC should also be instructed NOT to accumulate events during
+ * sleep (which Windows seems to do somehow), but the interface to control this
+ * behaviour is not known at this time.
+ *
+ * Models known to be affected are Samsung 530Uxx/535Uxx/540Uxx/550Pxx/900Xxx,
+ * however it is very likely that other Samsung models are affected.
+ *
+ * On systems which don't accumulate _Q events during sleep, this extra check
+ * should be harmless.
+ */
+static int ec_clear_on_resume(const struct dmi_system_id *id)
+{
+	pr_debug("Detected system needing EC poll on resume.\n");
+	EC_FLAGS_CLEAR_ON_RESUME = 1;
+	return 0;
+}
+
 static struct dmi_system_id ec_dmi_table[] __initdata = {
 	{
 	ec_skip_dsdt_scan, "Compal JFL92", {
@@ -965,6 +1026,9 @@ static struct dmi_system_id ec_dmi_table[] __initdata = {
 	ec_validate_ecdt, "ASUS hardware", {
 	DMI_MATCH(DMI_SYS_VENDOR, "ASUSTek Computer Inc."),
 	DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),}, NULL},
+	{
+	ec_clear_on_resume, "Samsung hardware", {
+	DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD.")}, NULL},
 	{},
 };
 

drivers/acpi/resource.c

@@ -77,18 +77,24 @@ bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res)
 	switch (ares->type) {
 	case ACPI_RESOURCE_TYPE_MEMORY24:
 		memory24 = &ares->data.memory24;
+		if (!memory24->address_length)
+			return false;
 		acpi_dev_get_memresource(res, memory24->minimum,
 					 memory24->address_length,
 					 memory24->write_protect);
 		break;
 	case ACPI_RESOURCE_TYPE_MEMORY32:
 		memory32 = &ares->data.memory32;
+		if (!memory32->address_length)
+			return false;
 		acpi_dev_get_memresource(res, memory32->minimum,
 					 memory32->address_length,
 					 memory32->write_protect);
 		break;
 	case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
 		fixed_memory32 = &ares->data.fixed_memory32;
+		if (!fixed_memory32->address_length)
+			return false;
 		acpi_dev_get_memresource(res, fixed_memory32->address,
 					 fixed_memory32->address_length,
 					 fixed_memory32->write_protect);
@@ -144,12 +150,16 @@ bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res)
 	switch (ares->type) {
 	case ACPI_RESOURCE_TYPE_IO:
 		io = &ares->data.io;
+		if (!io->address_length)
+			return false;
 		acpi_dev_get_ioresource(res, io->minimum,
 					io->address_length,
 					io->io_decode);
 		break;
 	case ACPI_RESOURCE_TYPE_FIXED_IO:
 		fixed_io = &ares->data.fixed_io;
+		if (!fixed_io->address_length)
+			return false;
 		acpi_dev_get_ioresource(res, fixed_io->address,
 					fixed_io->address_length,
 					ACPI_DECODE_10);

drivers/ata/libata-core.c

@@ -4175,6 +4175,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 
 	/* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */
 	{ "ST1000LM024 HN-M101MBB", "2AR10001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
+	{ "ST1000LM024 HN-M101MBB", "2BA30001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
 
 	/* Blacklist entries taken from Silicon Image 3124/3132
 	   Windows driver .inf file - also several Linux problem reports */
@@ -4225,6 +4226,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	/* devices that don't properly handle queued TRIM commands */
 	{ "Micron_M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
 	{ "Crucial_CT???M500SSD1",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Crucial_CT???M500SSD3",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
 
 	/*
 	 * Some WD SATA-I drives spin up and down erratically when the link

drivers/block/aoe/aoecmd.c

@@ -874,7 +874,7 @@ bio_pageinc(struct bio *bio)
 		/* Non-zero page count for non-head members of
 		 * compound pages is no longer allowed by the kernel.
 		 */
-		page = compound_trans_head(bv.bv_page);
+		page = compound_head(bv.bv_page);
 		atomic_inc(&page->_count);
 	}
 }
@@ -887,7 +887,7 @@ bio_pagedec(struct bio *bio)
 	struct bvec_iter iter;
 
 	bio_for_each_segment(bv, bio, iter) {
-		page = compound_trans_head(bv.bv_page);
+		page = compound_head(bv.bv_page);
 		atomic_dec(&page->_count);
 	}
 }

drivers/block/mtip32xx/mtip32xx.h

@@ -53,7 +53,7 @@
 #define MTIP_FTL_REBUILD_TIMEOUT_MS	2400000
 
 /* unaligned IO handling */
-#define MTIP_MAX_UNALIGNED_SLOTS	8
+#define MTIP_MAX_UNALIGNED_SLOTS	2
 
 /* Macro to extract the tag bit number from a tag value. */
 #define MTIP_TAG_BIT(tag)	(tag & 0x1F)

drivers/block/zram/zram_drv.c

@@ -612,6 +612,8 @@ static ssize_t disksize_store(struct device *dev,
 
 	disksize = PAGE_ALIGN(disksize);
 	meta = zram_meta_alloc(disksize);
+	if (!meta)
+		return -ENOMEM;
 	down_write(&zram->init_lock);
 	if (zram->init_done) {
 		up_write(&zram->init_lock);

drivers/clk/at91/clk-master.c

@@ -242,7 +242,7 @@ of_at91_clk_master_setup(struct device_node *np, struct at91_pmc *pmc,
 
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq)
-		return;
+		goto out_free_characteristics;
 
 	clk = at91_clk_register_master(pmc, irq, name, num_parents,
 				       parent_names, layout,

drivers/clk/clk-nomadik.c

@@ -494,6 +494,9 @@ static const struct file_operations nomadik_src_clk_debugfs_ops = {
 
 static int __init nomadik_src_clk_init_debugfs(void)
 {
+	/* Vital for multiplatform */
+	if (!src_base)
+		return -ENODEV;
 	src_pcksr0_boot = readl(src_base + SRC_PCKSR0);
 	src_pcksr1_boot = readl(src_base + SRC_PCKSR1);
 	debugfs_create_file("nomadik-src-clk", S_IFREG | S_IRUGO,

drivers/clk/clk.c

@@ -2226,24 +2226,25 @@ EXPORT_SYMBOL_GPL(devm_clk_unregister);
  */
 int __clk_get(struct clk *clk)
 {
-	if (clk && !try_module_get(clk->owner))
-		return 0;
+	if (clk) {
+		if (!try_module_get(clk->owner))
+			return 0;
 
-	kref_get(&clk->ref);
+		kref_get(&clk->ref);
+	}
 	return 1;
 }
 
 void __clk_put(struct clk *clk)
 {
-	if (WARN_ON_ONCE(IS_ERR(clk)))
+	if (!clk || WARN_ON_ONCE(IS_ERR(clk)))
 		return;
 
 	clk_prepare_lock();
 	kref_put(&clk->ref, __clk_release);
 	clk_prepare_unlock();
 
-	if (clk)
-		module_put(clk->owner);
+	module_put(clk->owner);
 }
 
 /***        clk rate change notifiers        ***/

drivers/clk/keystone/gate.c

@@ -179,6 +179,7 @@ static struct clk *clk_register_psc(struct device *dev,
 
 	init.name = name;
 	init.ops = &clk_psc_ops;
+	init.flags = 0;
 	init.parent_names = (parent_name ? &parent_name : NULL);
 	init.num_parents = (parent_name ? 1 : 0);
 

drivers/clk/mvebu/armada-370.c

@@ -141,13 +141,6 @@ static const struct coreclk_soc_desc a370_coreclks = {
 	.num_ratios = ARRAY_SIZE(a370_coreclk_ratios),
 };
 
-static void __init a370_coreclk_init(struct device_node *np)
-{
-	mvebu_coreclk_setup(np, &a370_coreclks);
-}
-CLK_OF_DECLARE(a370_core_clk, "marvell,armada-370-core-clock",
-	       a370_coreclk_init);
-
 /*
  * Clock Gating Control
  */
@@ -168,9 +161,15 @@ static const struct clk_gating_soc_desc a370_gating_desc[] __initconst = {
 	{ }
 };
 
-static void __init a370_clk_gating_init(struct device_node *np)
+static void __init a370_clk_init(struct device_node *np)
 {
-	mvebu_clk_gating_setup(np, a370_gating_desc);
+	struct device_node *cgnp =
+		of_find_compatible_node(NULL, NULL, "marvell,armada-370-gating-clock");
+
+	mvebu_coreclk_setup(np, &a370_coreclks);
+
+	if (cgnp)
+		mvebu_clk_gating_setup(cgnp, a370_gating_desc);
 }
-CLK_OF_DECLARE(a370_clk_gating, "marvell,armada-370-gating-clock",
-	       a370_clk_gating_init);
+CLK_OF_DECLARE(a370_clk, "marvell,armada-370-core-clock", a370_clk_init);
+

drivers/clk/mvebu/armada-xp.c

@@ -158,13 +158,6 @@ static const struct coreclk_soc_desc axp_coreclks = {
 	.num_ratios = ARRAY_SIZE(axp_coreclk_ratios),
 };
 
-static void __init axp_coreclk_init(struct device_node *np)
-{
-	mvebu_coreclk_setup(np, &axp_coreclks);
-}
-CLK_OF_DECLARE(axp_core_clk, "marvell,armada-xp-core-clock",
-	       axp_coreclk_init);
-
 /*
  * Clock Gating Control
  */
@@ -202,9 +195,14 @@ static const struct clk_gating_soc_desc axp_gating_desc[] __initconst = {
 	{ }
 };
 
-static void __init axp_clk_gating_init(struct device_node *np)
+static void __init axp_clk_init(struct device_node *np)
 {
-	mvebu_clk_gating_setup(np, axp_gating_desc);
+	struct device_node *cgnp =
+		of_find_compatible_node(NULL, NULL, "marvell,armada-xp-gating-clock");
+
+	mvebu_coreclk_setup(np, &axp_coreclks);
+
+	if (cgnp)
+		mvebu_clk_gating_setup(cgnp, axp_gating_desc);
 }
-CLK_OF_DECLARE(axp_clk_gating, "marvell,armada-xp-gating-clock",
-	       axp_clk_gating_init);
+CLK_OF_DECLARE(axp_clk, "marvell,armada-xp-core-clock", axp_clk_init);

drivers/clk/mvebu/dove.c

@@ -154,12 +154,6 @@ static const struct coreclk_soc_desc dove_coreclks = {
 	.num_ratios = ARRAY_SIZE(dove_coreclk_ratios),
 };
 
-static void __init dove_coreclk_init(struct device_node *np)
-{
-	mvebu_coreclk_setup(np, &dove_coreclks);
-}
-CLK_OF_DECLARE(dove_core_clk, "marvell,dove-core-clock", dove_coreclk_init);
-
 /*
  * Clock Gating Control
  */
@@ -186,9 +180,14 @@ static const struct clk_gating_soc_desc dove_gating_desc[] __initconst = {
 	{ }
 };
 
-static void __init dove_clk_gating_init(struct device_node *np)
+static void __init dove_clk_init(struct device_node *np)
 {
-	mvebu_clk_gating_setup(np, dove_gating_desc);
+	struct device_node *cgnp =
+		of_find_compatible_node(NULL, NULL, "marvell,dove-gating-clock");
+
+	mvebu_coreclk_setup(np, &dove_coreclks);
+
+	if (cgnp)
+		mvebu_clk_gating_setup(cgnp, dove_gating_desc);
 }
-CLK_OF_DECLARE(dove_clk_gating, "marvell,dove-gating-clock",
-	       dove_clk_gating_init);
+CLK_OF_DECLARE(dove_clk, "marvell,dove-core-clock", dove_clk_init);

drivers/clk/mvebu/kirkwood.c

@@ -193,13 +193,6 @@ static const struct coreclk_soc_desc kirkwood_coreclks = {
 	.num_ratios = ARRAY_SIZE(kirkwood_coreclk_ratios),
 };
 
-static void __init kirkwood_coreclk_init(struct device_node *np)
-{
-	mvebu_coreclk_setup(np, &kirkwood_coreclks);
-}
-CLK_OF_DECLARE(kirkwood_core_clk, "marvell,kirkwood-core-clock",
-	       kirkwood_coreclk_init);
-
 static const struct coreclk_soc_desc mv88f6180_coreclks = {
 	.get_tclk_freq = kirkwood_get_tclk_freq,
 	.get_cpu_freq = mv88f6180_get_cpu_freq,
@@ -208,13 +201,6 @@ static const struct coreclk_soc_desc mv88f6180_coreclks = {
 	.num_ratios = ARRAY_SIZE(kirkwood_coreclk_ratios),
 };
 
-static void __init mv88f6180_coreclk_init(struct device_node *np)
-{
-	mvebu_coreclk_setup(np, &mv88f6180_coreclks);
-}
-CLK_OF_DECLARE(mv88f6180_core_clk, "marvell,mv88f6180-core-clock",
-	       mv88f6180_coreclk_init);
-
 /*
  * Clock Gating Control
  */
@@ -239,9 +225,21 @@ static const struct clk_gating_soc_desc kirkwood_gating_desc[] __initconst = {
 	{ }
 };
 
-static void __init kirkwood_clk_gating_init(struct device_node *np)
+static void __init kirkwood_clk_init(struct device_node *np)
 {
-	mvebu_clk_gating_setup(np, kirkwood_gating_desc);
+	struct device_node *cgnp =
+		of_find_compatible_node(NULL, NULL, "marvell,kirkwood-gating-clock");
+
+
+	if (of_device_is_compatible(np, "marvell,mv88f6180-core-clock"))
+		mvebu_coreclk_setup(np, &mv88f6180_coreclks);
+	else
+		mvebu_coreclk_setup(np, &kirkwood_coreclks);
+
+	if (cgnp)
+		mvebu_clk_gating_setup(cgnp, kirkwood_gating_desc);
 }
-CLK_OF_DECLARE(kirkwood_clk_gating, "marvell,kirkwood-gating-clock",
-	       kirkwood_clk_gating_init);
+CLK_OF_DECLARE(kirkwood_clk, "marvell,kirkwood-core-clock",
+	       kirkwood_clk_init);
+CLK_OF_DECLARE(mv88f6180_clk, "marvell,mv88f6180-core-clock",
+	       kirkwood_clk_init);

drivers/clk/shmobile/clk-rcar-gen2.c

@@ -26,6 +26,8 @@ struct rcar_gen2_cpg {
 	void __iomem *reg;
 };
 
+#define CPG_FRQCRB			0x00000004
+#define CPG_FRQCRB_KICK			BIT(31)
 #define CPG_SDCKCR			0x00000074
 #define CPG_PLL0CR			0x000000d8
 #define CPG_FRQCRC			0x000000e0
@@ -45,6 +47,7 @@ struct rcar_gen2_cpg {
 struct cpg_z_clk {
 	struct clk_hw hw;
 	void __iomem *reg;
+	void __iomem *kick_reg;
 };
 
 #define to_z_clk(_hw)	container_of(_hw, struct cpg_z_clk, hw)
@@ -83,17 +86,45 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct cpg_z_clk *zclk = to_z_clk(hw);
 	unsigned int mult;
-	u32 val;
+	u32 val, kick;
+	unsigned int i;
 
 	mult = div_u64((u64)rate * 32, parent_rate);
 	mult = clamp(mult, 1U, 32U);
 
+	if (clk_readl(zclk->kick_reg) & CPG_FRQCRB_KICK)
+		return -EBUSY;
+
 	val = clk_readl(zclk->reg);
 	val &= ~CPG_FRQCRC_ZFC_MASK;
 	val |= (32 - mult) << CPG_FRQCRC_ZFC_SHIFT;
 	clk_writel(val, zclk->reg);
 
-	return 0;
+	/*
+	 * Set KICK bit in FRQCRB to update hardware setting and wait for
+	 * clock change completion.
+	 */
+	kick = clk_readl(zclk->kick_reg);
+	kick |= CPG_FRQCRB_KICK;
+	clk_writel(kick, zclk->kick_reg);
+
+	/*
+	 * Note: There is no HW information about the worst case latency.
+	 *
+	 * Using experimental measurements, it seems that no more than
+	 * ~10 iterations are needed, independently of the CPU rate.
+	 * Since this value might be dependant of external xtal rate, pll1
+	 * rate or even the other emulation clocks rate, use 1000 as a
+	 * "super" safe value.
+	 */
+	for (i = 1000; i; i--) {
+		if (!(clk_readl(zclk->kick_reg) & CPG_FRQCRB_KICK))
+			return 0;
+
+		cpu_relax();
+	}
+
+	return -ETIMEDOUT;
 }
 
 static const struct clk_ops cpg_z_clk_ops = {
@@ -120,6 +151,7 @@ static struct clk * __init cpg_z_clk_register(struct rcar_gen2_cpg *cpg)
 	init.num_parents = 1;
 
 	zclk->reg = cpg->reg + CPG_FRQCRC;
+	zclk->kick_reg = cpg->reg + CPG_FRQCRB;
 	zclk->hw.init = &init;
 
 	clk = clk_register(NULL, &zclk->hw);
@@ -186,7 +218,7 @@ rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg,
 			     const char *name)
 {
 	const struct clk_div_table *table = NULL;
-	const char *parent_name = "main";
+	const char *parent_name;
 	unsigned int shift;
 	unsigned int mult = 1;
 	unsigned int div = 1;
@@ -201,23 +233,31 @@ rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg,
 		 * the multiplier value.
 		 */
 		u32 value = clk_readl(cpg->reg + CPG_PLL0CR);
+		parent_name = "main";
 		mult = ((value >> 24) & ((1 << 7) - 1)) + 1;
 	} else if (!strcmp(name, "pll1")) {
+		parent_name = "main";
 		mult = config->pll1_mult / 2;
 	} else if (!strcmp(name, "pll3")) {
+		parent_name = "main";
 		mult = config->pll3_mult;
 	} else if (!strcmp(name, "lb")) {
+		parent_name = "pll1_div2";
 		div = cpg_mode & BIT(18) ? 36 : 24;
 	} else if (!strcmp(name, "qspi")) {
+		parent_name = "pll1_div2";
 		div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2)
-		    ? 16 : 20;
+		    ? 8 : 10;
 	} else if (!strcmp(name, "sdh")) {
+		parent_name = "pll1_div2";
 		table = cpg_sdh_div_table;
 		shift = 8;
 	} else if (!strcmp(name, "sd0")) {
+		parent_name = "pll1_div2";
 		table = cpg_sd01_div_table;
 		shift = 4;
 	} else if (!strcmp(name, "sd1")) {
+		parent_name = "pll1_div2";
 		table = cpg_sd01_div_table;
 		shift = 0;
 	} else if (!strcmp(name, "z")) {

drivers/clk/tegra/clk-divider.c

@@ -59,7 +59,7 @@ static int get_div(struct tegra_clk_frac_div *divider, unsigned long rate,
 		return 0;
 
 	if (divider_ux1 > get_max_div(divider))
-		return -EINVAL;
+		return get_max_div(divider);
 
 	return divider_ux1;
 }

drivers/clk/tegra/clk-id.h

@@ -180,9 +180,13 @@ enum clk_id {
 	tegra_clk_sbc6_8,
 	tegra_clk_sclk,
 	tegra_clk_sdmmc1,
+	tegra_clk_sdmmc1_8,
 	tegra_clk_sdmmc2,
+	tegra_clk_sdmmc2_8,
 	tegra_clk_sdmmc3,
+	tegra_clk_sdmmc3_8,
 	tegra_clk_sdmmc4,
+	tegra_clk_sdmmc4_8,
 	tegra_clk_se,
 	tegra_clk_soc_therm,
 	tegra_clk_sor0,

drivers/clk/tegra/clk-tegra-periph.c

@@ -371,9 +371,7 @@ static const char *mux_pllp3_pllc_clkm[] = {
 static const char *mux_pllm_pllc_pllp_plla_pllc2_c3_clkm[] = {
 	"pll_m", "pll_c", "pll_p", "pll_a", "pll_c2", "pll_c3", "clk_m"
 };
-static u32 mux_pllm_pllc_pllp_plla_pllc2_c3_clkm_idx[] = {
-	[0] = 0, [1] = 1, [2] = 2, [3] = 3, [4] = 4, [5] = 6,
-};
+#define mux_pllm_pllc_pllp_plla_pllc2_c3_clkm_idx NULL
 
 static const char *mux_pllm_pllc2_c_c3_pllp_plla_pllc4[] = {
 	"pll_m", "pll_c2", "pll_c", "pll_c3", "pll_p", "pll_a_out0", "pll_c4",
@@ -465,6 +463,10 @@ static struct tegra_periph_init_data periph_clks[] = {
 	MUX("adx1", mux_plla_pllc_pllp_clkm, CLK_SOURCE_ADX1, 180, TEGRA_PERIPH_ON_APB, tegra_clk_adx1),
 	MUX("amx1", mux_plla_pllc_pllp_clkm, CLK_SOURCE_AMX1, 185, TEGRA_PERIPH_ON_APB, tegra_clk_amx1),
 	MUX("vi_sensor2", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR2, 20, TEGRA_PERIPH_NO_RESET, tegra_clk_vi_sensor2),
+	MUX8("sdmmc1", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SDMMC1, 14, 0, tegra_clk_sdmmc1_8),
+	MUX8("sdmmc2", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SDMMC2, 9, 0, tegra_clk_sdmmc2_8),
+	MUX8("sdmmc3", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SDMMC3, 69, 0, tegra_clk_sdmmc3_8),
+	MUX8("sdmmc4", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SDMMC4, 15, 0, tegra_clk_sdmmc4_8),
 	MUX8("sbc1", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SBC1, 41, TEGRA_PERIPH_ON_APB, tegra_clk_sbc1_8),
 	MUX8("sbc2", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SBC2, 44, TEGRA_PERIPH_ON_APB, tegra_clk_sbc2_8),
 	MUX8("sbc3", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SBC3, 46, TEGRA_PERIPH_ON_APB, tegra_clk_sbc3_8),
@@ -492,7 +494,7 @@ static struct tegra_periph_init_data periph_clks[] = {
 	UART("uartb", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTB, 7, tegra_clk_uartb),
 	UART("uartc", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTC, 55, tegra_clk_uartc),
 	UART("uartd", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTD, 65, tegra_clk_uartd),
-	UART("uarte", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTE, 65, tegra_clk_uarte),
+	UART("uarte", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTE, 66, tegra_clk_uarte),
 	XUSB("xusb_host_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_HOST_SRC, 143, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_host_src),
 	XUSB("xusb_falcon_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_FALCON_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_falcon_src),
 	XUSB("xusb_fs_src", mux_clkm_48M_pllp_480M, CLK_SOURCE_XUSB_FS_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_fs_src),

drivers/clk/tegra/clk-tegra-super-gen4.c

@@ -120,7 +120,7 @@ void __init tegra_super_clk_gen4_init(void __iomem *clk_base,
 					ARRAY_SIZE(cclk_lp_parents),
 					CLK_SET_RATE_PARENT,
 					clk_base + CCLKLP_BURST_POLICY,
-					0, 4, 8, 9, NULL);
+					TEGRA_DIVIDER_2, 4, 8, 9, NULL);
 		*dt_clk = clk;
 	}
 

drivers/clk/tegra/clk-tegra114.c

@@ -682,12 +682,12 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_timer] = { .dt_id = TEGRA114_CLK_TIMER, .present = true },
 	[tegra_clk_uarta] = { .dt_id = TEGRA114_CLK_UARTA, .present = true },
 	[tegra_clk_uartd] = { .dt_id = TEGRA114_CLK_UARTD, .present = true },
-	[tegra_clk_sdmmc2] = { .dt_id = TEGRA114_CLK_SDMMC2, .present = true },
+	[tegra_clk_sdmmc2_8] = { .dt_id = TEGRA114_CLK_SDMMC2, .present = true },
 	[tegra_clk_i2s1] = { .dt_id = TEGRA114_CLK_I2S1, .present = true },
 	[tegra_clk_i2c1] = { .dt_id = TEGRA114_CLK_I2C1, .present = true },
 	[tegra_clk_ndflash] = { .dt_id = TEGRA114_CLK_NDFLASH, .present = true },
-	[tegra_clk_sdmmc1] = { .dt_id = TEGRA114_CLK_SDMMC1, .present = true },
-	[tegra_clk_sdmmc4] = { .dt_id = TEGRA114_CLK_SDMMC4, .present = true },
+	[tegra_clk_sdmmc1_8] = { .dt_id = TEGRA114_CLK_SDMMC1, .present = true },
+	[tegra_clk_sdmmc4_8] = { .dt_id = TEGRA114_CLK_SDMMC4, .present = true },
 	[tegra_clk_pwm] = { .dt_id = TEGRA114_CLK_PWM, .present = true },
 	[tegra_clk_i2s0] = { .dt_id = TEGRA114_CLK_I2S0, .present = true },
 	[tegra_clk_i2s2] = { .dt_id = TEGRA114_CLK_I2S2, .present = true },
@@ -723,7 +723,7 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_bsev] = { .dt_id = TEGRA114_CLK_BSEV, .present = true },
 	[tegra_clk_i2c3] = { .dt_id = TEGRA114_CLK_I2C3, .present = true },
 	[tegra_clk_sbc4_8] = { .dt_id = TEGRA114_CLK_SBC4, .present = true },
-	[tegra_clk_sdmmc3] = { .dt_id = TEGRA114_CLK_SDMMC3, .present = true },
+	[tegra_clk_sdmmc3_8] = { .dt_id = TEGRA114_CLK_SDMMC3, .present = true },
 	[tegra_clk_owr] = { .dt_id = TEGRA114_CLK_OWR, .present = true },
 	[tegra_clk_csite] = { .dt_id = TEGRA114_CLK_CSITE, .present = true },
 	[tegra_clk_la] = { .dt_id = TEGRA114_CLK_LA, .present = true },

drivers/clk/tegra/clk-tegra124.c

@@ -516,11 +516,11 @@ static struct div_nmp pllp_nmp = {
 };
 
 static struct tegra_clk_pll_freq_table pll_p_freq_table[] = {
-	{12000000, 216000000, 432, 12, 1, 8},
-	{13000000, 216000000, 432, 13, 1, 8},
-	{16800000, 216000000, 360, 14, 1, 8},
-	{19200000, 216000000, 360, 16, 1, 8},
-	{26000000, 216000000, 432, 26, 1, 8},
+	{12000000, 408000000, 408, 12, 0, 8},
+	{13000000, 408000000, 408, 13, 0, 8},
+	{16800000, 408000000, 340, 14, 0, 8},
+	{19200000, 408000000, 340, 16, 0, 8},
+	{26000000, 408000000, 408, 26, 0, 8},
 	{0, 0, 0, 0, 0, 0},
 };
 
@@ -570,6 +570,15 @@ static struct tegra_clk_pll_params pll_a_params = {
 	.flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_USE_LOCK,
 };
 
+static struct div_nmp plld_nmp = {
+	.divm_shift = 0,
+	.divm_width = 5,
+	.divn_shift = 8,
+	.divn_width = 11,
+	.divp_shift = 20,
+	.divp_width = 3,
+};
+
 static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
 	{12000000, 216000000, 864, 12, 4, 12},
 	{13000000, 216000000, 864, 13, 4, 12},
@@ -603,19 +612,18 @@ static struct tegra_clk_pll_params pll_d_params = {
 	.lock_mask = PLL_BASE_LOCK,
 	.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
 	.lock_delay = 1000,
-	.div_nmp = &pllp_nmp,
+	.div_nmp = &plld_nmp,
 	.freq_table = pll_d_freq_table,
 	.flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
 		 TEGRA_PLL_USE_LOCK,
 };
 
 static struct tegra_clk_pll_freq_table tegra124_pll_d2_freq_table[] = {
-	{ 12000000, 148500000,  99, 1, 8},
-	{ 12000000, 594000000,  99, 1, 1},
-	{ 13000000, 594000000,  91, 1, 1},      /* actual: 591.5 MHz */
-	{ 16800000, 594000000,  71, 1, 1},      /* actual: 596.4 MHz */
-	{ 19200000, 594000000,  62, 1, 1},      /* actual: 595.2 MHz */
-	{ 26000000, 594000000,  91, 2, 1},      /* actual: 591.5 MHz */
+	{ 12000000, 594000000,  99, 1, 2},
+	{ 13000000, 594000000,  91, 1, 2},      /* actual: 591.5 MHz */
+	{ 16800000, 594000000,  71, 1, 2},      /* actual: 596.4 MHz */
+	{ 19200000, 594000000,  62, 1, 2},      /* actual: 595.2 MHz */
+	{ 26000000, 594000000,  91, 2, 2},      /* actual: 591.5 MHz */
 	{ 0, 0, 0, 0, 0, 0 },
 };
 
@@ -753,21 +761,19 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_rtc] = { .dt_id = TEGRA124_CLK_RTC, .present = true },
 	[tegra_clk_timer] = { .dt_id = TEGRA124_CLK_TIMER, .present = true },
 	[tegra_clk_uarta] = { .dt_id = TEGRA124_CLK_UARTA, .present = true },
-	[tegra_clk_sdmmc2] = { .dt_id = TEGRA124_CLK_SDMMC2, .present = true },
+	[tegra_clk_sdmmc2_8] = { .dt_id = TEGRA124_CLK_SDMMC2, .present = true },
 	[tegra_clk_i2s1] = { .dt_id = TEGRA124_CLK_I2S1, .present = true },
 	[tegra_clk_i2c1] = { .dt_id = TEGRA124_CLK_I2C1, .present = true },
 	[tegra_clk_ndflash] = { .dt_id = TEGRA124_CLK_NDFLASH, .present = true },
-	[tegra_clk_sdmmc1] = { .dt_id = TEGRA124_CLK_SDMMC1, .present = true },
-	[tegra_clk_sdmmc4] = { .dt_id = TEGRA124_CLK_SDMMC4, .present = true },
+	[tegra_clk_sdmmc1_8] = { .dt_id = TEGRA124_CLK_SDMMC1, .present = true },
+	[tegra_clk_sdmmc4_8] = { .dt_id = TEGRA124_CLK_SDMMC4, .present = true },
 	[tegra_clk_pwm] = { .dt_id = TEGRA124_CLK_PWM, .present = true },
 	[tegra_clk_i2s2] = { .dt_id = TEGRA124_CLK_I2S2, .present = true },
-	[tegra_clk_gr2d] = { .dt_id = TEGRA124_CLK_GR_2D, .present = true },
 	[tegra_clk_usbd] = { .dt_id = TEGRA124_CLK_USBD, .present = true },
 	[tegra_clk_isp_8] = { .dt_id = TEGRA124_CLK_ISP, .present = true },
-	[tegra_clk_gr3d] = { .dt_id = TEGRA124_CLK_GR_3D, .present = true },
 	[tegra_clk_disp2] = { .dt_id = TEGRA124_CLK_DISP2, .present = true },
 	[tegra_clk_disp1] = { .dt_id = TEGRA124_CLK_DISP1, .present = true },
-	[tegra_clk_host1x] = { .dt_id = TEGRA124_CLK_HOST1X, .present = true },
+	[tegra_clk_host1x_8] = { .dt_id = TEGRA124_CLK_HOST1X, .present = true },
 	[tegra_clk_vcp] = { .dt_id = TEGRA124_CLK_VCP, .present = true },
 	[tegra_clk_i2s0] = { .dt_id = TEGRA124_CLK_I2S0, .present = true },
 	[tegra_clk_apbdma] = { .dt_id = TEGRA124_CLK_APBDMA, .present = true },
@@ -794,7 +800,7 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_uartd] = { .dt_id = TEGRA124_CLK_UARTD, .present = true },
 	[tegra_clk_i2c3] = { .dt_id = TEGRA124_CLK_I2C3, .present = true },
 	[tegra_clk_sbc4] = { .dt_id = TEGRA124_CLK_SBC4, .present = true },
-	[tegra_clk_sdmmc3] = { .dt_id = TEGRA124_CLK_SDMMC3, .present = true },
+	[tegra_clk_sdmmc3_8] = { .dt_id = TEGRA124_CLK_SDMMC3, .present = true },
 	[tegra_clk_pcie] = { .dt_id = TEGRA124_CLK_PCIE, .present = true },
 	[tegra_clk_owr] = { .dt_id = TEGRA124_CLK_OWR, .present = true },
 	[tegra_clk_afi] = { .dt_id = TEGRA124_CLK_AFI, .present = true },
@@ -1286,9 +1292,9 @@ static void __init tegra124_pll_init(void __iomem *clk_base,
 	clk_register_clkdev(clk, "pll_d2", NULL);
 	clks[TEGRA124_CLK_PLL_D2] = clk;
 
-	/* PLLD2_OUT0 ?? */
+	/* PLLD2_OUT0 */
 	clk = clk_register_fixed_factor(NULL, "pll_d2_out0", "pll_d2",
-					CLK_SET_RATE_PARENT, 1, 2);
+					CLK_SET_RATE_PARENT, 1, 1);
 	clk_register_clkdev(clk, "pll_d2_out0", NULL);
 	clks[TEGRA124_CLK_PLL_D2_OUT0] = clk;
 

drivers/clk/tegra/clk-tegra20.c

@@ -574,6 +574,8 @@ static struct tegra_clk tegra20_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_tvdac] = { .dt_id = TEGRA20_CLK_TVDAC, .present = true },
 	[tegra_clk_vi_sensor] = { .dt_id = TEGRA20_CLK_VI_SENSOR, .present = true },
 	[tegra_clk_afi] = { .dt_id = TEGRA20_CLK_AFI, .present = true },
+	[tegra_clk_fuse] = { .dt_id = TEGRA20_CLK_FUSE, .present = true },
+	[tegra_clk_kfuse] = { .dt_id = TEGRA20_CLK_KFUSE, .present = true },
 };
 
 static unsigned long tegra20_clk_measure_input_freq(void)

drivers/cpufreq/cpufreq.c

@@ -1109,6 +1109,21 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif,
 		goto err_set_policy_cpu;
 	}
 
+	/* related cpus should atleast have policy->cpus */
+	cpumask_or(policy->related_cpus, policy->related_cpus, policy->cpus);
+
+	/*
+	 * affected cpus must always be the one, which are online. We aren't
+	 * managing offline cpus here.
+	 */
+	cpumask_and(policy->cpus, policy->cpus, cpu_online_mask);
+
+	if (!frozen) {
+		policy->user_policy.min = policy->min;
+		policy->user_policy.max = policy->max;
+	}
+
+	down_write(&policy->rwsem);
 	write_lock_irqsave(&cpufreq_driver_lock, flags);
 	for_each_cpu(j, policy->cpus)
 		per_cpu(cpufreq_cpu_data, j) = policy;
@@ -1162,20 +1177,6 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif,
 		}
 	}
 
-	/* related cpus should atleast have policy->cpus */
-	cpumask_or(policy->related_cpus, policy->related_cpus, policy->cpus);
-
-	/*
-	 * affected cpus must always be the one, which are online. We aren't
-	 * managing offline cpus here.
-	 */
-	cpumask_and(policy->cpus, policy->cpus, cpu_online_mask);
-
-	if (!frozen) {
-		policy->user_policy.min = policy->min;
-		policy->user_policy.max = policy->max;
-	}
-
 	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
 				     CPUFREQ_START, policy);
 
@@ -1206,6 +1207,7 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif,
 		policy->user_policy.policy = policy->policy;
 		policy->user_policy.governor = policy->governor;
 	}
+	up_write(&policy->rwsem);
 
 	kobject_uevent(&policy->kobj, KOBJ_ADD);
 	up_read(&cpufreq_rwsem);
@@ -1546,23 +1548,16 @@ static unsigned int __cpufreq_get(unsigned int cpu)
  */
 unsigned int cpufreq_get(unsigned int cpu)
 {
-	struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu);
+	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
 	unsigned int ret_freq = 0;
 
-	if (cpufreq_disabled() || !cpufreq_driver)
-		return -ENOENT;
-
-	BUG_ON(!policy);
-
-	if (!down_read_trylock(&cpufreq_rwsem))
-		return 0;
-
-	down_read(&policy->rwsem);
-
-	ret_freq = __cpufreq_get(cpu);
+	if (policy) {
+		down_read(&policy->rwsem);
+		ret_freq = __cpufreq_get(cpu);
+		up_read(&policy->rwsem);
 
-	up_read(&policy->rwsem);
-	up_read(&cpufreq_rwsem);
+		cpufreq_cpu_put(policy);
+	}
 
 	return ret_freq;
 }

drivers/firewire/core-device.c

@@ -916,7 +916,7 @@ static int lookup_existing_device(struct device *dev, void *data)
 		old->config_rom_retries = 0;
 		fw_notice(card, "rediscovered device %s\n", dev_name(dev));
 
-		PREPARE_DELAYED_WORK(&old->work, fw_device_update);
+		old->workfn = fw_device_update;
 		fw_schedule_device_work(old, 0);
 
 		if (current_node == card->root_node)
@@ -1075,7 +1075,7 @@ static void fw_device_init(struct work_struct *work)
 	if (atomic_cmpxchg(&device->state,
 			   FW_DEVICE_INITIALIZING,
 			   FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
-		PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+		device->workfn = fw_device_shutdown;
 		fw_schedule_device_work(device, SHUTDOWN_DELAY);
 	} else {
 		fw_notice(card, "created device %s: GUID %08x%08x, S%d00\n",
@@ -1196,13 +1196,20 @@ static void fw_device_refresh(struct work_struct *work)
 		  dev_name(&device->device), fw_rcode_string(ret));
  gone:
 	atomic_set(&device->state, FW_DEVICE_GONE);
-	PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+	device->workfn = fw_device_shutdown;
 	fw_schedule_device_work(device, SHUTDOWN_DELAY);
  out:
 	if (node_id == card->root_node->node_id)
 		fw_schedule_bm_work(card, 0);
 }
 
+static void fw_device_workfn(struct work_struct *work)
+{
+	struct fw_device *device = container_of(to_delayed_work(work),
+						struct fw_device, work);
+	device->workfn(work);
+}
+
 void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
 {
 	struct fw_device *device;
@@ -1252,7 +1259,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
 		 * power-up after getting plugged in.  We schedule the
 		 * first config rom scan half a second after bus reset.
 		 */
-		INIT_DELAYED_WORK(&device->work, fw_device_init);
+		device->workfn = fw_device_init;
+		INIT_DELAYED_WORK(&device->work, fw_device_workfn);
 		fw_schedule_device_work(device, INITIAL_DELAY);
 		break;
 
@@ -1268,7 +1276,7 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
 		if (atomic_cmpxchg(&device->state,
 			    FW_DEVICE_RUNNING,
 			    FW_DEVICE_INITIALIZING) == FW_DEVICE_RUNNING) {
-			PREPARE_DELAYED_WORK(&device->work, fw_device_refresh);
+			device->workfn = fw_device_refresh;
 			fw_schedule_device_work(device,
 				device->is_local ? 0 : INITIAL_DELAY);
 		}
@@ -1283,7 +1291,7 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
 		smp_wmb();  /* update node_id before generation */
 		device->generation = card->generation;
 		if (atomic_read(&device->state) == FW_DEVICE_RUNNING) {
-			PREPARE_DELAYED_WORK(&device->work, fw_device_update);
+			device->workfn = fw_device_update;
 			fw_schedule_device_work(device, 0);
 		}
 		break;
@@ -1308,7 +1316,7 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
 		device = node->data;
 		if (atomic_xchg(&device->state,
 				FW_DEVICE_GONE) == FW_DEVICE_RUNNING) {
-			PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+			device->workfn = fw_device_shutdown;
 			fw_schedule_device_work(device,
 				list_empty(&card->link) ? 0 : SHUTDOWN_DELAY);
 		}

drivers/firewire/net.c

@@ -929,8 +929,6 @@ static void fwnet_write_complete(struct fw_card *card, int rcode,
 	if (rcode == RCODE_COMPLETE) {
 		fwnet_transmit_packet_done(ptask);
 	} else {
-		fwnet_transmit_packet_failed(ptask);
-
 		if (printk_timed_ratelimit(&j,  1000) || rcode != last_rcode) {
 			dev_err(&ptask->dev->netdev->dev,
 				"fwnet_write_complete failed: %x (skipped %d)\n",
@@ -938,8 +936,10 @@ static void fwnet_write_complete(struct fw_card *card, int rcode,
 
 			errors_skipped = 0;
 			last_rcode = rcode;
-		} else
+		} else {
 			errors_skipped++;
+		}
+		fwnet_transmit_packet_failed(ptask);
 	}
 }
 

drivers/firewire/ohci.c

@@ -290,7 +290,6 @@ static char ohci_driver_name[] = KBUILD_MODNAME;
 #define QUIRK_NO_MSI			0x10
 #define QUIRK_TI_SLLZ059		0x20
 #define QUIRK_IR_WAKE			0x40
-#define QUIRK_PHY_LCTRL_TIMEOUT		0x80
 
 /* In case of multiple matches in ohci_quirks[], only the first one is used. */
 static const struct {
@@ -303,10 +302,7 @@ static const struct {
 		QUIRK_BE_HEADERS},
 
 	{PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6,
-		QUIRK_PHY_LCTRL_TIMEOUT | QUIRK_NO_MSI},
-
-	{PCI_VENDOR_ID_ATT, PCI_ANY_ID, PCI_ANY_ID,
-		QUIRK_PHY_LCTRL_TIMEOUT},
+		QUIRK_NO_MSI},
 
 	{PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_SB1394, PCI_ANY_ID,
 		QUIRK_RESET_PACKET},
@@ -353,7 +349,6 @@ MODULE_PARM_DESC(quirks, "Chip quirks (default = 0"
 	", disable MSI = "		__stringify(QUIRK_NO_MSI)
 	", TI SLLZ059 erratum = "	__stringify(QUIRK_TI_SLLZ059)
 	", IR wake unreliable = "	__stringify(QUIRK_IR_WAKE)
-	", phy LCtrl timeout = "	__stringify(QUIRK_PHY_LCTRL_TIMEOUT)
 	")");
 
 #define OHCI_PARAM_DEBUG_AT_AR		1
@@ -2299,9 +2294,6 @@ static int ohci_enable(struct fw_card *card,
 	 * TI TSB82AA2 + TSB81BA3(A) cards signal LPS enabled early but
 	 * cannot actually use the phy at that time.  These need tens of
 	 * millisecods pause between LPS write and first phy access too.
-	 *
-	 * But do not wait for 50msec on Agere/LSI cards.  Their phy
-	 * arbitration state machine may time out during such a long wait.
 	 */
 
 	reg_write(ohci, OHCI1394_HCControlSet,
@@ -2309,11 +2301,8 @@ static int ohci_enable(struct fw_card *card,
 		  OHCI1394_HCControl_postedWriteEnable);
 	flush_writes(ohci);
 
-	if (!(ohci->quirks & QUIRK_PHY_LCTRL_TIMEOUT))
+	for (lps = 0, i = 0; !lps && i < 3; i++) {
 		msleep(50);
-
-	for (lps = 0, i = 0; !lps && i < 150; i++) {
-		msleep(1);
 		lps = reg_read(ohci, OHCI1394_HCControlSet) &
 		      OHCI1394_HCControl_LPS;
 	}

drivers/firewire/sbp2.c

@@ -146,6 +146,7 @@ struct sbp2_logical_unit {
 	 */
 	int generation;
 	int retries;
+	work_func_t workfn;
 	struct delayed_work work;
 	bool has_sdev;
 	bool blocked;
@@ -864,7 +865,7 @@ static void sbp2_login(struct work_struct *work)
 	/* set appropriate retry limit(s) in BUSY_TIMEOUT register */
 	sbp2_set_busy_timeout(lu);
 
-	PREPARE_DELAYED_WORK(&lu->work, sbp2_reconnect);
+	lu->workfn = sbp2_reconnect;
 	sbp2_agent_reset(lu);
 
 	/* This was a re-login. */
@@ -918,7 +919,7 @@ static void sbp2_login(struct work_struct *work)
 	 * If a bus reset happened, sbp2_update will have requeued
 	 * lu->work already.  Reset the work from reconnect to login.
 	 */
-	PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
+	lu->workfn = sbp2_login;
 }
 
 static void sbp2_reconnect(struct work_struct *work)
@@ -952,7 +953,7 @@ static void sbp2_reconnect(struct work_struct *work)
 		    lu->retries++ >= 5) {
 			dev_err(tgt_dev(tgt), "failed to reconnect\n");
 			lu->retries = 0;
-			PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
+			lu->workfn = sbp2_login;
 		}
 		sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
 
@@ -972,6 +973,13 @@ static void sbp2_reconnect(struct work_struct *work)
 	sbp2_conditionally_unblock(lu);
 }
 
+static void sbp2_lu_workfn(struct work_struct *work)
+{
+	struct sbp2_logical_unit *lu = container_of(to_delayed_work(work),
+						struct sbp2_logical_unit, work);
+	lu->workfn(work);
+}
+
 static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry)
 {
 	struct sbp2_logical_unit *lu;
@@ -998,7 +1006,8 @@ static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry)
 	lu->blocked  = false;
 	++tgt->dont_block;
 	INIT_LIST_HEAD(&lu->orb_list);
-	INIT_DELAYED_WORK(&lu->work, sbp2_login);
+	lu->workfn = sbp2_login;
+	INIT_DELAYED_WORK(&lu->work, sbp2_lu_workfn);
 
 	list_add_tail(&lu->link, &tgt->lu_list);
 	return 0;

drivers/gpu/drm/armada/armada_drv.c

@@ -68,15 +68,7 @@ void __armada_drm_queue_unref_work(struct drm_device *dev,
 {
 	struct armada_private *priv = dev->dev_private;
 
-	/*
-	 * Yes, we really must jump through these hoops just to store a
-	 * _pointer_ to something into the kfifo.  This is utterly insane
-	 * and idiotic, because it kfifo requires the _data_ pointed to by
-	 * the pointer const, not the pointer itself.  Not only that, but
-	 * you have to pass a pointer _to_ the pointer you want stored.
-	 */
-	const struct drm_framebuffer *silly_api_alert = fb;
-	WARN_ON(!kfifo_put(&priv->fb_unref, &silly_api_alert));
+	WARN_ON(!kfifo_put(&priv->fb_unref, fb));
 	schedule_work(&priv->fb_unref_work);
 }
 

drivers/gpu/drm/bochs/Kconfig

@@ -2,6 +2,7 @@ config DRM_BOCHS
 	tristate "DRM Support for bochs dispi vga interface (qemu stdvga)"
 	depends on DRM && PCI
 	select DRM_KMS_HELPER
+	select DRM_KMS_FB_HELPER
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT

drivers/gpu/drm/i915/i915_drv.c

@@ -403,7 +403,7 @@ MODULE_DEVICE_TABLE(pci, pciidlist);
 void intel_detect_pch(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct pci_dev *pch;
+	struct pci_dev *pch = NULL;
 
 	/* In all current cases, num_pipes is equivalent to the PCH_NOP setting
 	 * (which really amounts to a PCH but no South Display).
@@ -424,12 +424,9 @@ void intel_detect_pch(struct drm_device *dev)
 	 * all the ISA bridge devices and check for the first match, instead
 	 * of only checking the first one.
 	 */
-	pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
-	while (pch) {
-		struct pci_dev *curr = pch;
+	while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) {
 		if (pch->vendor == PCI_VENDOR_ID_INTEL) {
-			unsigned short id;
-			id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
+			unsigned short id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
 			dev_priv->pch_id = id;
 
 			if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
@@ -461,18 +458,16 @@ void intel_detect_pch(struct drm_device *dev)
 				DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
 				WARN_ON(!IS_HASWELL(dev));
 				WARN_ON(!IS_ULT(dev));
-			} else {
-				goto check_next;
-			}
-			pci_dev_put(pch);
+			} else
+				continue;
+
 			break;
 		}
-check_next:
-		pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, curr);
-		pci_dev_put(curr);
 	}
 	if (!pch)
-		DRM_DEBUG_KMS("No PCH found?\n");
+		DRM_DEBUG_KMS("No PCH found.\n");
+
+	pci_dev_put(pch);
 }
 
 bool i915_semaphore_is_enabled(struct drm_device *dev)

drivers/gpu/drm/i915/i915_gem_stolen.c

@@ -82,9 +82,22 @@ static unsigned long i915_stolen_to_physical(struct drm_device *dev)
 	r = devm_request_mem_region(dev->dev, base, dev_priv->gtt.stolen_size,
 				    "Graphics Stolen Memory");
 	if (r == NULL) {
-		DRM_ERROR("conflict detected with stolen region: [0x%08x - 0x%08x]\n",
-			  base, base + (uint32_t)dev_priv->gtt.stolen_size);
-		base = 0;
+		/*
+		 * One more attempt but this time requesting region from
+		 * base + 1, as we have seen that this resolves the region
+		 * conflict with the PCI Bus.
+		 * This is a BIOS w/a: Some BIOS wrap stolen in the root
+		 * PCI bus, but have an off-by-one error. Hence retry the
+		 * reservation starting from 1 instead of 0.
+		 */
+		r = devm_request_mem_region(dev->dev, base + 1,
+					    dev_priv->gtt.stolen_size - 1,
+					    "Graphics Stolen Memory");
+		if (r == NULL) {
+			DRM_ERROR("conflict detected with stolen region: [0x%08x - 0x%08x]\n",
+				  base, base + (uint32_t)dev_priv->gtt.stolen_size);
+			base = 0;
+		}
 	}
 
 	return base;

drivers/gpu/drm/i915/intel_display.c

@@ -1092,12 +1092,12 @@ static void assert_cursor(struct drm_i915_private *dev_priv,
 	struct drm_device *dev = dev_priv->dev;
 	bool cur_state;
 
-	if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
-		cur_state = I915_READ(CURCNTR_IVB(pipe)) & CURSOR_MODE;
-	else if (IS_845G(dev) || IS_I865G(dev))
+	if (IS_845G(dev) || IS_I865G(dev))
 		cur_state = I915_READ(_CURACNTR) & CURSOR_ENABLE;
-	else
+	else if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev))
 		cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
+	else
+		cur_state = I915_READ(CURCNTR_IVB(pipe)) & CURSOR_MODE;
 
 	WARN(cur_state != state,
 	     "cursor on pipe %c assertion failure (expected %s, current %s)\n",

drivers/gpu/drm/i915/intel_hdmi.c

@@ -845,7 +845,7 @@ static int hdmi_portclock_limit(struct intel_hdmi *hdmi)
 {
 	struct drm_device *dev = intel_hdmi_to_dev(hdmi);
 
-	if (IS_G4X(dev))
+	if (!hdmi->has_hdmi_sink || IS_G4X(dev))
 		return 165000;
 	else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8)
 		return 300000;
@@ -899,8 +899,8 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
 	 * outputs. We also need to check that the higher clock still fits
 	 * within limits.
 	 */
-	if (pipe_config->pipe_bpp > 8*3 && clock_12bpc <= portclock_limit
-	    && HAS_PCH_SPLIT(dev)) {
+	if (pipe_config->pipe_bpp > 8*3 && intel_hdmi->has_hdmi_sink &&
+	    clock_12bpc <= portclock_limit && HAS_PCH_SPLIT(dev)) {
 		DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
 		desired_bpp = 12*3;
 

drivers/gpu/drm/i915/intel_panel.c

@@ -698,7 +698,7 @@ static void i9xx_enable_backlight(struct intel_connector *connector)
 		freq /= 0xff;
 
 	ctl = freq << 17;
-	if (IS_GEN2(dev) && panel->backlight.combination_mode)
+	if (panel->backlight.combination_mode)
 		ctl |= BLM_LEGACY_MODE;
 	if (IS_PINEVIEW(dev) && panel->backlight.active_low_pwm)
 		ctl |= BLM_POLARITY_PNV;
@@ -979,7 +979,7 @@ static int i9xx_setup_backlight(struct intel_connector *connector)
 
 	ctl = I915_READ(BLC_PWM_CTL);
 
-	if (IS_GEN2(dev))
+	if (IS_GEN2(dev) || IS_I915GM(dev) || IS_I945GM(dev))
 		panel->backlight.combination_mode = ctl & BLM_LEGACY_MODE;
 
 	if (IS_PINEVIEW(dev))

drivers/gpu/drm/i915/intel_pm.c

@@ -3493,6 +3493,8 @@ static void valleyview_setup_pctx(struct drm_device *dev)
 	u32 pcbr;
 	int pctx_size = 24*1024;
 
+	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
 	pcbr = I915_READ(VLV_PCBR);
 	if (pcbr) {
 		/* BIOS set it up already, grab the pre-alloc'd space */
@@ -3542,8 +3544,6 @@ static void valleyview_enable_rps(struct drm_device *dev)
 		I915_WRITE(GTFIFODBG, gtfifodbg);
 	}
 
-	valleyview_setup_pctx(dev);
-
 	/* If VLV, Forcewake all wells, else re-direct to regular path */
 	gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
 
@@ -4395,6 +4395,8 @@ void intel_enable_gt_powersave(struct drm_device *dev)
 		ironlake_enable_rc6(dev);
 		intel_init_emon(dev);
 	} else if (IS_GEN6(dev) || IS_GEN7(dev)) {
+		if (IS_VALLEYVIEW(dev))
+			valleyview_setup_pctx(dev);
 		/*
 		 * PCU communication is slow and this doesn't need to be
 		 * done at any specific time, so do this out of our fast path

drivers/gpu/drm/radeon/atombios_encoders.c

@@ -1314,7 +1314,7 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t
 			}
 			if (is_dp)
 				args.v5.ucLaneNum = dp_lane_count;
-			else if (radeon_encoder->pixel_clock > 165000)
+			else if (radeon_dig_monitor_is_duallink(encoder, radeon_encoder->pixel_clock))
 				args.v5.ucLaneNum = 8;
 			else
 				args.v5.ucLaneNum = 4;

drivers/gpu/drm/radeon/cik.c

@@ -3046,7 +3046,7 @@ static u32 cik_create_bitmask(u32 bit_width)
 }
 
 /**
- * cik_select_se_sh - select which SE, SH to address
+ * cik_get_rb_disabled - computes the mask of disabled RBs
  *
  * @rdev: radeon_device pointer
  * @max_rb_num: max RBs (render backends) for the asic
@@ -7902,7 +7902,8 @@ int cik_resume(struct radeon_device *rdev)
 	/* init golden registers */
 	cik_init_golden_registers(rdev);
 
-	radeon_pm_resume(rdev);
+	if (rdev->pm.pm_method == PM_METHOD_DPM)
+		radeon_pm_resume(rdev);
 
 	rdev->accel_working = true;
 	r = cik_startup(rdev);

drivers/gpu/drm/radeon/evergreen.c

@@ -5299,7 +5299,8 @@ int evergreen_resume(struct radeon_device *rdev)
 	/* init golden registers */
 	evergreen_init_golden_registers(rdev);
 
-	radeon_pm_resume(rdev);
+	if (rdev->pm.pm_method == PM_METHOD_DPM)
+		radeon_pm_resume(rdev);
 
 	rdev->accel_working = true;
 	r = evergreen_startup(rdev);

drivers/gpu/drm/radeon/evergreen_smc.h

@@ -57,7 +57,7 @@ typedef struct SMC_Evergreen_MCRegisters SMC_Evergreen_MCRegisters;
 
 #define EVERGREEN_SMC_FIRMWARE_HEADER_LOCATION 0x100
 
-#define EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters   0x0
+#define EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters   0x8
 #define EVERGREEN_SMC_FIRMWARE_HEADER_stateTable      0xC
 #define EVERGREEN_SMC_FIRMWARE_HEADER_mcRegisterTable 0x20
 

drivers/gpu/drm/radeon/ni.c

@@ -2105,7 +2105,8 @@ int cayman_resume(struct radeon_device *rdev)
 	/* init golden registers */
 	ni_init_golden_registers(rdev);
 
-	radeon_pm_resume(rdev);
+	if (rdev->pm.pm_method == PM_METHOD_DPM)
+		radeon_pm_resume(rdev);
 
 	rdev->accel_working = true;
 	r = cayman_startup(rdev);

drivers/gpu/drm/radeon/r100.c

@@ -3942,8 +3942,6 @@ int r100_resume(struct radeon_device *rdev)
 	/* Initialize surface registers */
 	radeon_surface_init(rdev);
 
-	radeon_pm_resume(rdev);
-
 	rdev->accel_working = true;
 	r = r100_startup(rdev);
 	if (r) {

drivers/gpu/drm/radeon/r300.c

@@ -1430,8 +1430,6 @@ int r300_resume(struct radeon_device *rdev)
 	/* Initialize surface registers */
 	radeon_surface_init(rdev);
 
-	radeon_pm_resume(rdev);
-
 	rdev->accel_working = true;
 	r = r300_startup(rdev);
 	if (r) {