Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

Documentation/devicetree/bindings/clock/microchip,pic32.txt

@@ -0,0 +1,39 @@
+Microchip PIC32 Clock Controller Binding
+----------------------------------------
+Microchip clock controller is consists of few oscillators, PLL, multiplexer
+and few divider modules.
+
+This binding uses common clock bindings.
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: shall be "microchip,pic32mzda-clk".
+- reg: shall contain base address and length of clock registers.
+- #clock-cells: shall be 1.
+
+Optional properties:
+- microchip,pic32mzda-sosc: shall be added only if platform has
+  secondary oscillator connected.
+
+Example:
+	rootclk: clock-controller@1f801200 {
+		compatible = "microchip,pic32mzda-clk";
+		reg = <0x1f801200 0x200>;
+		#clock-cells = <1>;
+		/* optional */
+		microchip,pic32mzda-sosc;
+	};
+
+
+The clock consumer shall specify the desired clock-output of the clock
+controller (as defined in [2]) by specifying output-id in its "clock"
+phandle cell.
+[2] include/dt-bindings/clock/microchip,pic32-clock.h
+
+For example for UART2:
+uart2: serial@2 {
+	compatible = "microchip,pic32mzda-uart";
+	reg = <>;
+	interrupts = <>;
+	clocks = <&rootclk PB2CLK>;
+};

Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt

@@ -0,0 +1,57 @@
+Broadcom BCM6345-style Level 1 interrupt controller
+
+This block is a first level interrupt controller that is typically connected
+directly to one of the HW INT lines on each CPU.
+
+Key elements of the hardware design include:
+
+- 32, 64 or 128 incoming level IRQ lines
+
+- Most onchip peripherals are wired directly to an L1 input
+
+- A separate instance of the register set for each CPU, allowing individual
+  peripheral IRQs to be routed to any CPU
+
+- Contains one or more enable/status word pairs per CPU
+
+- No atomic set/clear operations
+
+- No polarity/level/edge settings
+
+- No FIFO or priority encoder logic; software is expected to read all
+  2-4 status words to determine which IRQs are pending
+
+Required properties:
+
+- compatible: should be "brcm,bcm<soc>-l1-intc", "brcm,bcm6345-l1-intc"
+- reg: specifies the base physical address and size of the registers;
+  the number of supported IRQs is inferred from the size argument
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+  source, should be 1.
+- interrupt-parent: specifies the phandle to the parent interrupt controller(s)
+  this one is cascaded from
+- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
+  node; valid values depend on the type of parent interrupt controller
+
+If multiple reg ranges and interrupt-parent entries are present on an SMP
+system, the driver will allow IRQ SMP affinity to be set up through the
+/proc/irq/ interface.  In the simplest possible configuration, only one
+reg range and one interrupt-parent is needed.
+
+The driver operates in native CPU endian by default, there is no support for
+specifying an alternative endianness.
+
+Example:
+
+periph_intc: interrupt-controller@10000000 {
+        compatible = "brcm,bcm63168-l1-intc", "brcm,bcm6345-l1-intc";
+        reg = <0x10000020 0x20>,
+              <0x10000040 0x20>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interrupt-parent = <&cpu_intc>;
+        interrupts = <2>, <3>;
+};

Documentation/devicetree/bindings/mips/brcm/soc.txt

@@ -4,7 +4,8 @@ Required properties:
 
 - compatible: "brcm,bcm3384", "brcm,bcm33843"
               "brcm,bcm3384-viper", "brcm,bcm33843-viper"
-              "brcm,bcm6328", "brcm,bcm6368",
+              "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6368",
+              "brcm,bcm63168", "brcm,bcm63268",
               "brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360",
               "brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425"
 

Documentation/devicetree/bindings/mips/cavium/ciu3.txt

@@ -0,0 +1,27 @@
+* Central Interrupt Unit v3
+
+Properties:
+- compatible: "cavium,octeon-7890-ciu3"
+
+  Compatibility with 78XX and 73XX SOCs.
+
+- interrupt-controller:  This is an interrupt controller.
+
+- reg: The base address of the CIU's register bank.
+
+- #interrupt-cells: Must be <2>.  The first cell is source number.
+  The second cell indicates the triggering semantics, and may have a
+  value of either 4 for level semantics, or 1 for edge semantics.
+
+Example:
+	interrupt-controller@1010000000000 {
+		compatible = "cavium,octeon-7890-ciu3";
+		interrupt-controller;
+		/* Interrupts are specified by two parts:
+		 * 1) Source number (20 significant bits)
+		 * 2) Trigger type: (4 == level, 1 == edge)
+		 */
+		#address-cells = <0>;
+		#interrupt-cells = <2>;
+		reg = <0x10100 0x00000000 0x0 0xb0000000>;
+	};

Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt

@@ -0,0 +1,29 @@
+* Microchip Universal Asynchronous Receiver Transmitter (UART)
+
+Required properties:
+- compatible: Should be "microchip,pic32mzda-uart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+- clocks: Phandle to the clock.
+          See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- pinctrl-names: A pinctrl state names "default" must be defined.
+- pinctrl-0: Phandle referencing pin configuration of the UART peripheral.
+             See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+Optional properties:
+- cts-gpios: CTS pin for UART
+
+Example:
+	uart1: serial@1f822000 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822000 0x50>;
+		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
+			<113 IRQ_TYPE_LEVEL_HIGH>,
+			<114 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&PBCLK2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart1
+				&pinctrl_uart1_cts
+				&pinctrl_uart1_rts>;
+		cts-gpios = <&gpio1 15 0>;
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -72,6 +72,8 @@ digilent	Diglent, Inc.
 dlg	Dialog Semiconductor
 dlink	D-Link Corporation
 dmo	Data Modul AG
+dptechnics	DPTechnics
+dragino	Dragino Technology Co., Limited
 ea	Embedded Artists AB
 ebv	EBV Elektronik
 edt	Emerging Display Technologies
@@ -176,6 +178,7 @@ nvidia	NVIDIA
 nxp	NXP Semiconductors
 okaya	Okaya Electric America, Inc.
 olimex	OLIMEX Ltd.
+onion	Onion Corporation
 onnn	ON Semiconductor Corp.
 opencores	OpenCores.org
 option	Option NV

Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt

@@ -0,0 +1,19 @@
+* Microchip PIC32 Deadman Timer
+
+The deadman timer is used to reset the processor in the event of a software
+malfunction. It is a free-running instruction fetch timer, which is clocked
+whenever an instruction fetch occurs until a count match occurs.
+
+Required properties:
+- compatible: must be "microchip,pic32mzda-dmt".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- clocks: phandle of parent clock (should be &PBCLK7).
+
+Example:
+
+	watchdog@1f800a00 {
+		compatible = "microchip,pic32mzda-dmt";
+		reg = <0x1f800a00 0x80>;
+		clocks = <&PBCLK7>;
+	};

Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt

@@ -0,0 +1,18 @@
+* Microchip PIC32 Watchdog Timer
+
+When enabled, the watchdog peripheral can be used to reset the device if the
+WDT is not cleared periodically in software.
+
+Required properties:
+- compatible: must be "microchip,pic32mzda-wdt".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- clocks: phandle of source clk. should be <&LPRC> clk.
+
+Example:
+
+	watchdog@1f800800 {
+		compatible = "microchip,pic32mzda-wdt";
+		reg = <0x1f800800 0x200>;
+		clocks = <&LPRC>;
+	};

MAINTAINERS

@@ -6491,7 +6491,7 @@ F:	net/l3mdev
 F:	include/net/l3mdev.h
 
 LANTIQ MIPS ARCHITECTURE
-M:	John Crispin <blogic@openwrt.org>
+M:	John Crispin <john@phrozen.org>
 L:	linux-mips@linux-mips.org
 S:	Maintained
 F:	arch/mips/lantiq
@@ -7332,6 +7332,15 @@ S:	Supported
 F:	Documentation/mips/
 F:	arch/mips/
 
+MIPS/LOONGSON1 ARCHITECTURE
+M:	Keguang Zhang <keguang.zhang@gmail.com>
+L:	linux-mips@linux-mips.org
+S:	Maintained
+F:	arch/mips/loongson32/
+F:	arch/mips/include/asm/mach-loongson32/
+F:	drivers/*/*loongson1*
+F:	drivers/*/*/*loongson1*
+
 MIROSOUND PCM20 FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
@@ -9251,7 +9260,7 @@ S:	Maintained
 F:	drivers/video/fbdev/aty/aty128fb.c
 
 RALINK MIPS ARCHITECTURE
-M:	John Crispin <blogic@openwrt.org>
+M:	John Crispin <john@phrozen.org>
 L:	linux-mips@linux-mips.org
 S:	Maintained
 F:	arch/mips/ralink

arch/mips/Kconfig

@@ -62,6 +62,7 @@ config MIPS
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select GENERIC_TIME_VSYSCALL
 	select ARCH_CLOCKSOURCE_DATA
+	select HANDLE_DOMAIN_IRQ
 
 menu "Machine selection"
 
@@ -137,7 +138,7 @@ config ATH79
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_MIPS16
-	select SYS_SUPPORTS_ZBOOT
+	select SYS_SUPPORTS_ZBOOT_UART_PROM
 	select USE_OF
 	help
 	  Support for the Atheros AR71XX/AR724X/AR913X SoCs.
@@ -194,6 +195,7 @@ config BCM47XX
 	select GPIOLIB
 	select LEDS_GPIO_REGISTER
 	select BCM47XX_NVRAM
+	select BCM47XX_SPROM
 	help
 	 Support for BCM47XX based boards
 
@@ -471,6 +473,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	select SYS_SUPPORTS_ZBOOT
+	select SYS_SUPPORTS_RELOCATABLE
 	select USE_OF
 	select ZONE_DMA32 if 64BIT
 	select BUILTIN_DTB
@@ -505,6 +508,7 @@ config MIPS_SEAD3
 	select MIPS_MSC
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS32_R6
 	select SYS_HAS_CPU_MIPS64_R1
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -514,6 +518,7 @@ config MIPS_SEAD3
 	select SYS_SUPPORTS_SMARTMIPS
 	select SYS_SUPPORTS_MICROMIPS
 	select SYS_SUPPORTS_MIPS16
+	select SYS_SUPPORTS_RELOCATABLE
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	select USE_OF
@@ -1153,6 +1158,13 @@ config ISA_DMA_API
 config HOLES_IN_ZONE
 	bool
 
+config SYS_SUPPORTS_RELOCATABLE
+	bool
+	help
+	 Selected if the platform supports relocating the kernel.
+	 The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
+	 to allow access to command line and entropy sources.
+
 #
 # Endianness selection.  Sufficiently obscure so many users don't know what to
 # answer,so we try hard to limit the available choices.  Also the use of a
@@ -1340,11 +1352,30 @@ config CPU_LOONGSON3
 	select CPU_SUPPORTS_HUGEPAGES
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
+	select MIPS_PGD_C0_CONTEXT
 	select GPIOLIB
 	help
 		The Loongson 3 processor implements the MIPS64R2 instruction
 		set with many extensions.
 
+config LOONGSON3_ENHANCEMENT
+	bool "New Loongson 3 CPU Enhancements"
+	default n
+	select CPU_MIPSR2
+	select CPU_HAS_PREFETCH
+	depends on CPU_LOONGSON3
+	help
+	  New Loongson 3 CPU (since Loongson-3A R2, as opposed to Loongson-3A
+	  R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as
+	  FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPv2 ASE, User
+	  Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer),
+	  Fast TLB refill support, etc.
+
+	  This option enable those enhancements which are not probed at run
+	  time. If you want a generic kernel to run on all Loongson 3 machines,
+	  please say 'N' here. If you want a high-performance kernel to run on
+	  new Loongson 3 machines only, please say 'Y' here.
+
 config CPU_LOONGSON2E
 	bool "Loongson 2E"
 	depends on SYS_HAS_CPU_LOONGSON2E
@@ -1373,6 +1404,8 @@ config CPU_LOONGSON1B
 	bool "Loongson 1B"
 	depends on SYS_HAS_CPU_LOONGSON1B
 	select CPU_LOONGSON1
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select LEDS_GPIO_REGISTER
 	help
 	  The Loongson 1B is a 32-bit SoC, which implements the MIPS32
 	  release 2 instruction set.
@@ -1671,6 +1704,7 @@ config CPU_XLP
 	select CPU_HAS_PREFETCH
 	select CPU_MIPSR2
 	select CPU_SUPPORTS_HUGEPAGES
+	select MIPS_ASID_BITS_VARIABLE
 	help
 	  Netlogic Microsystems XLP processors.
 endchoice
@@ -1796,6 +1830,7 @@ config CPU_BMIPS4380
 	select MIPS_L1_CACHE_SHIFT_6
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_HOTPLUG_CPU
+	select CPU_HAS_RIXI
 
 config CPU_BMIPS5000
 	bool
@@ -1803,10 +1838,12 @@ config CPU_BMIPS5000
 	select MIPS_L1_CACHE_SHIFT_7
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_HOTPLUG_CPU
+	select CPU_HAS_RIXI
 
 config SYS_HAS_CPU_LOONGSON3
 	bool
 	select CPU_SUPPORTS_CPUFREQ
+	select CPU_HAS_RIXI
 
 config SYS_HAS_CPU_LOONGSON2E
 	bool
@@ -1959,11 +1996,15 @@ config CPU_MIPSR1
 config CPU_MIPSR2
 	bool
 	default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
+	select CPU_HAS_RIXI
 	select MIPS_SPRAM
 
 config CPU_MIPSR6
 	bool
 	default y if CPU_MIPS32_R6 || CPU_MIPS64_R6
+	select CPU_HAS_RIXI
+	select HAVE_ARCH_BITREVERSE
+	select MIPS_ASID_BITS_VARIABLE
 	select MIPS_SPRAM
 
 config EVA
@@ -1997,7 +2038,7 @@ config MIPS_PGD_C0_CONTEXT
 #
 config HARDWARE_WATCHPOINTS
        bool
-       default y if CPU_MIPSR1 || CPU_MIPSR2
+       default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6
 
 menu "Kernel type"
 
@@ -2040,6 +2081,16 @@ config KVM_GUEST_TIMER_FREQ
 	  emulation when determining guest CPU Frequency. Instead, the guest's
 	  timer frequency is specified directly.
 
+config MIPS_VA_BITS_48
+	bool "48 bits virtual memory"
+	depends on 64BIT
+	help
+	  Support a maximum at least 48 bits of application virtual memory.
+	  Default is 40 bits or less, depending on the CPU.
+	  This option result in a small memory overhead for page tables.
+	  This option is only supported with 16k and 64k page sizes.
+	  If unsure, say N.
+
 choice
 	prompt "Kernel page size"
 	default PAGE_SIZE_4KB
@@ -2047,6 +2098,7 @@ choice
 config PAGE_SIZE_4KB
 	bool "4kB"
 	depends on !CPU_LOONGSON2 && !CPU_LOONGSON3
+	depends on !MIPS_VA_BITS_48
 	help
 	 This option select the standard 4kB Linux page size.  On some
 	 R3000-family processors this is the only available page size.  Using
@@ -2056,6 +2108,7 @@ config PAGE_SIZE_4KB
 config PAGE_SIZE_8KB
 	bool "8kB"
 	depends on CPU_R8000 || CPU_CAVIUM_OCTEON
+	depends on !MIPS_VA_BITS_48
 	help
 	  Using 8kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available
@@ -2074,6 +2127,7 @@ config PAGE_SIZE_16KB
 config PAGE_SIZE_32KB
 	bool "32kB"
 	depends on CPU_CAVIUM_OCTEON
+	depends on !MIPS_VA_BITS_48
 	help
 	  Using 32kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available
@@ -2278,7 +2332,7 @@ config MIPS_CMP
 
 config MIPS_CPS
 	bool "MIPS Coherent Processing System support"
-	depends on SYS_SUPPORTS_MIPS_CPS && !CPU_MIPSR6
+	depends on SYS_SUPPORTS_MIPS_CPS
 	select MIPS_CM
 	select MIPS_CPC
 	select MIPS_CPS_PM if HOTPLUG_CPU
@@ -2369,6 +2423,9 @@ config CPU_HAS_WB
 config XKS01
 	bool
 
+config CPU_HAS_RIXI
+	bool
+
 #
 # Vectored interrupt mode is an R2 feature
 #
@@ -2399,6 +2456,21 @@ config CPU_R4000_WORKAROUNDS
 config CPU_R4400_WORKAROUNDS
 	bool
 
+config MIPS_ASID_SHIFT
+	int
+	default 6 if CPU_R3000 || CPU_TX39XX
+	default 4 if CPU_R8000
+	default 0
+
+config MIPS_ASID_BITS
+	int
+	default 0 if MIPS_ASID_BITS_VARIABLE
+	default 6 if CPU_R3000 || CPU_TX39XX
+	default 8
+
+config MIPS_ASID_BITS_VARIABLE
+	bool
+
 #
 # - Highmem only makes sense for the 32-bit kernel.
 # - The current highmem code will only work properly on physically indexed
@@ -2468,6 +2540,61 @@ config NUMA
 config SYS_SUPPORTS_NUMA
 	bool
 
+config RELOCATABLE
+	bool "Relocatable kernel"
+	depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6)
+	help
+	  This builds a kernel image that retains relocation information
+	  so it can be loaded someplace besides the default 1MB.
+	  The relocations make the kernel binary about 15% larger,
+	  but are discarded at runtime
+
+config RELOCATION_TABLE_SIZE
+	hex "Relocation table size"
+	depends on RELOCATABLE
+	range 0x0 0x01000000
+	default "0x00100000"
+	---help---
+	  A table of relocation data will be appended to the kernel binary
+	  and parsed at boot to fix up the relocated kernel.
+
+	  This option allows the amount of space reserved for the table to be
+	  adjusted, although the default of 1Mb should be ok in most cases.
+
+	  The build will fail and a valid size suggested if this is too small.
+
+	  If unsure, leave at the default value.
+
+config RANDOMIZE_BASE
+	bool "Randomize the address of the kernel image"
+	depends on RELOCATABLE
+	---help---
+	   Randomizes the physical and virtual address at which the
+	   kernel image is loaded, as a security feature that
+	   deters exploit attempts relying on knowledge of the location
+	   of kernel internals.
+
+	   Entropy is generated using any coprocessor 0 registers available.
+
+	   The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.
+
+	   If unsure, say N.
+
+config RANDOMIZE_BASE_MAX_OFFSET
+	hex "Maximum kASLR offset" if EXPERT
+	depends on RANDOMIZE_BASE
+	range 0x0 0x40000000 if EVA || 64BIT
+	range 0x0 0x08000000
+	default "0x01000000"
+	---help---
+	  When kASLR is active, this provides the maximum offset that will
+	  be applied to the kernel image. It should be set according to the
+	  amount of physical RAM available in the target system minus
+	  PHYSICAL_START and must be a power of 2.
+
+	  This is limited by the size of KSEG0, 256Mb on 32-bit or 1Gb with
+	  EVA or 64-bit. The default is 16Mb.
+
 config NODES_SHIFT
 	int
 	default "6"
@@ -2475,7 +2602,7 @@ config NODES_SHIFT
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON3)
+	depends on PERF_EVENTS && !OPROFILE && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON3)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
@@ -2808,6 +2935,10 @@ choice
 
 	config MIPS_CMDLINE_FROM_BOOTLOADER
 		bool "Bootloader kernel arguments if available"
+
+	config MIPS_CMDLINE_BUILTIN_EXTEND
+		depends on CMDLINE_BOOL
+		bool "Extend builtin kernel arguments with bootloader arguments"
 endchoice
 
 endmenu

arch/mips/Makefile

@@ -12,6 +12,9 @@
 # for "archclean" cleaning up for this architecture.
 #
 
+archscripts: scripts_basic
+	$(Q)$(MAKE) $(build)=arch/mips/boot/tools relocs
+
 KBUILD_DEFCONFIG := ip22_defconfig
 
 #
@@ -93,6 +96,10 @@ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
 KBUILD_AFLAGS_MODULE		+= -mlong-calls
 KBUILD_CFLAGS_MODULE		+= -mlong-calls
 
+ifeq ($(CONFIG_RELOCATABLE),y)
+LDFLAGS_vmlinux			+= --emit-relocs
+endif
+
 #
 # pass -msoft-float to GAS if it supports it.  However on newer binutils
 # (specifically newer than 2.24.51.20140728) we then also need to explicitly
@@ -193,6 +200,8 @@ ifeq ($(CONFIG_CPU_HAS_MSA),y)
 toolchain-msa				:= $(call cc-option-yn,$(mips-cflags) -mhard-float -mfp64 -Wa$(comma)-mmsa)
 cflags-$(toolchain-msa)			+= -DTOOLCHAIN_SUPPORTS_MSA
 endif
+toolchain-virt				:= $(call cc-option-yn,$(mips-cflags) -mvirt)
+cflags-$(toolchain-virt)		+= -DTOOLCHAIN_SUPPORTS_VIRT
 
 cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_NEVER)	+= -mcompact-branches=never
 cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_OPTIMAL)	+= -mcompact-branches=optimal
@@ -310,6 +319,10 @@ rom.bin rom.sw: vmlinux
 		$(bootvars-y) $@
 endif
 
+CMD_RELOCS = arch/mips/boot/tools/relocs
+quiet_cmd_relocs = RELOCS  $<
+      cmd_relocs = $(CMD_RELOCS) $<
+
 #
 # Some machines like the Indy need 32-bit ELF binaries for booting purposes.
 # Other need ECOFF, so we build a 32-bit ELF binary for them which we then
@@ -318,6 +331,11 @@ endif
 quiet_cmd_32 = OBJCOPY $@
 	cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
 vmlinux.32: vmlinux
+ifeq ($(CONFIG_RELOCATABLE)$(CONFIG_64BIT),yy)
+# Currently, objcopy fails to handle the relocations in the elf64
+# So the relocs tool must be run here to remove them first
+	$(call cmd,relocs)
+endif
 	$(call cmd,32)
 
 #
@@ -333,6 +351,9 @@ all:	$(all-y)
 
 # boot
 $(boot-y): $(vmlinux-32) FORCE
+ifeq ($(CONFIG_RELOCATABLE)$(CONFIG_32BIT),yy)
+	$(call cmd,relocs)
+endif
 	$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) \
 		$(bootvars-y) arch/mips/boot/$@
 
@@ -385,6 +406,7 @@ endif
 archclean:
 	$(Q)$(MAKE) $(clean)=arch/mips/boot
 	$(Q)$(MAKE) $(clean)=arch/mips/boot/compressed
+	$(Q)$(MAKE) $(clean)=arch/mips/boot/tools
 	$(Q)$(MAKE) $(clean)=arch/mips/lasat
 
 define archhelp

arch/mips/alchemy/common/clock.c

@@ -1043,8 +1043,7 @@ static int __init alchemy_clk_init(void)
 
 	/* Root of the Alchemy clock tree: external 12MHz crystal osc */
 	c = clk_register_fixed_rate(NULL, ALCHEMY_ROOT_CLK, NULL,
-					   CLK_IS_ROOT,
-					   ALCHEMY_ROOTCLK_RATE);
+					   0, ALCHEMY_ROOTCLK_RATE);
 	ERRCK(c)
 
 	/* CPU core clock */

arch/mips/ath79/Kconfig

@@ -71,18 +71,6 @@ config ATH79_MACH_UBNT_XM
 	  Say 'Y' here if you want your kernel to support the
 	  Ubiquiti Networks XM (rev 1.0) board.
 
-choice
-	prompt "Build a DTB in the kernel"
-	optional
-	help
-	  Select a devicetree that should be built into the kernel.
-
-	config DTB_TL_WR1043ND_V1
-		bool "TL-WR1043ND Version 1"
-		select BUILTIN_DTB
-		select SOC_AR913X
-endchoice
-
 endmenu
 
 config SOC_AR71XX

arch/mips/ath79/clock.c

@@ -18,17 +18,21 @@
 #include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/ath79-clk.h>
 
 #include <asm/div64.h>
 
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include "common.h"
+#include "machtypes.h"
 
 #define AR71XX_BASE_FREQ	40000000
 #define AR724X_BASE_FREQ	40000000
 
-static struct clk *clks[3];
+static struct clk *clks[ATH79_CLK_END];
 static struct clk_onecell_data clk_data = {
 	.clks = clks,
 	.clk_num = ARRAY_SIZE(clks),
@@ -40,7 +44,7 @@ static struct clk *__init ath79_add_sys_clkdev(
 	struct clk *clk;
 	int err;
 
-	clk = clk_register_fixed_rate(NULL, id, NULL, CLK_IS_ROOT, rate);
+	clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
 	if (!clk)
 		panic("failed to allocate %s clock structure", id);
 
@@ -78,107 +82,139 @@ static void __init ar71xx_clocks_init(void)
 	ahb_rate = cpu_rate / div;
 
 	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
 
 	clk_add_alias("wdt", NULL, "ahb", NULL);
 	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
-static void __init ar724x_clocks_init(void)
+static struct clk * __init ath79_reg_ffclk(const char *name,
+		const char *parent_name, unsigned int mult, unsigned int div)
 {
-	unsigned long ref_rate;
-	unsigned long cpu_rate;
-	unsigned long ddr_rate;
-	unsigned long ahb_rate;
-	u32 pll;
-	u32 freq;
-	u32 div;
+	struct clk *clk;
 
-	ref_rate = AR724X_BASE_FREQ;
-	pll = ath79_pll_rr(AR724X_PLL_REG_CPU_CONFIG);
+	clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
+	if (!clk)
+		panic("failed to allocate %s clock structure", name);
 
-	div = ((pll >> AR724X_PLL_FB_SHIFT) & AR724X_PLL_FB_MASK);
-	freq = div * ref_rate;
+	return clk;
+}
 
+static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
+{
+	u32 pll;
+	u32 mult, div, ddr_div, ahb_div;
+
+	pll = __raw_readl(pll_base + AR724X_PLL_REG_CPU_CONFIG);
+
+	mult = ((pll >> AR724X_PLL_FB_SHIFT) & AR724X_PLL_FB_MASK);
 	div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK) * 2;
-	freq /= div;
 
-	cpu_rate = freq;
+	ddr_div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
+	ahb_div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
 
-	div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
-	ddr_rate = freq / div;
+	clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", mult, div);
+	clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", mult, div * ddr_div);
+	clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", mult, div * ahb_div);
+}
 
-	div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
-	ahb_rate = cpu_rate / div;
+static void __init ar724x_clocks_init(void)
+{
+	struct clk *ref_clk;
 
-	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	ref_clk = ath79_add_sys_clkdev("ref", AR724X_BASE_FREQ);
+
+	ar724x_clk_init(ref_clk, ath79_pll_base);
+
+	/* just make happy plat_time_init() from arch/mips/ath79/setup.c */
+	clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
+	clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
+	clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
 
 	clk_add_alias("wdt", NULL, "ahb", NULL);
 	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
-static void __init ar933x_clocks_init(void)
+static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
 {
-	unsigned long ref_rate;
-	unsigned long cpu_rate;
-	unsigned long ddr_rate;
-	unsigned long ahb_rate;
 	u32 clock_ctrl;
-	u32 cpu_config;
-	u32 freq;
-	u32 t;
+	u32 ref_div;
+	u32 ninit_mul;
+	u32 out_div;
 
-	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-		ref_rate = (40 * 1000 * 1000);
-	else
-		ref_rate = (25 * 1000 * 1000);
+	u32 cpu_div;
+	u32 ddr_div;
+	u32 ahb_div;
 
-	clock_ctrl = ath79_pll_rr(AR933X_PLL_CLOCK_CTRL_REG);
+	clock_ctrl = __raw_readl(pll_base + AR933X_PLL_CLOCK_CTRL_REG);
 	if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
-		cpu_rate = ref_rate;
-		ahb_rate = ref_rate;
-		ddr_rate = ref_rate;
+		ref_div = 1;
+		ninit_mul = 1;
+		out_div = 1;
+
+		cpu_div = 1;
+		ddr_div = 1;
+		ahb_div = 1;
 	} else {
-		cpu_config = ath79_pll_rr(AR933X_PLL_CPU_CONFIG_REG);
+		u32 cpu_config;
+		u32 t;
+
+		cpu_config = __raw_readl(pll_base + AR933X_PLL_CPU_CONFIG_REG);
 
 		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
 		    AR933X_PLL_CPU_CONFIG_REFDIV_MASK;
-		freq = ref_rate / t;
+		ref_div = t;
 
-		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
+		ninit_mul = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
 		    AR933X_PLL_CPU_CONFIG_NINT_MASK;
-		freq *= t;
 
 		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
 		    AR933X_PLL_CPU_CONFIG_OUTDIV_MASK;
 		if (t == 0)
 			t = 1;
 
-		freq >>= t;
+		out_div = (1 << t);
 
-		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
+		cpu_div = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
 		     AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1;
-		cpu_rate = freq / t;
 
-		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
+		ddr_div = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
 		      AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1;
-		ddr_rate = freq / t;
 
-		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
+		ahb_div = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
 		     AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
-		ahb_rate = freq / t;
 	}
 
-	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref",
+					ninit_mul, ref_div * out_div * cpu_div);
+	clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref",
+					ninit_mul, ref_div * out_div * ddr_div);
+	clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref",
+					ninit_mul, ref_div * out_div * ahb_div);
+}
+
+static void __init ar933x_clocks_init(void)
+{
+	struct clk *ref_clk;
+	unsigned long ref_rate;
+	u32 t;
+
+	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+		ref_rate = (40 * 1000 * 1000);
+	else
+		ref_rate = (25 * 1000 * 1000);
+
+	ref_clk = ath79_add_sys_clkdev("ref", ref_rate);
+
+	ar9330_clk_init(ref_clk, ath79_pll_base);
+
+	/* just make happy plat_time_init() from arch/mips/ath79/setup.c */
+	clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
+	clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
+	clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
 
 	clk_add_alias("wdt", NULL, "ahb", NULL);
 	clk_add_alias("uart", NULL, "ref", NULL);
@@ -310,9 +346,9 @@ static void __init ar934x_clocks_init(void)
 		ahb_rate = cpu_pll / (postdiv + 1);
 
 	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
 
 	clk_add_alias("wdt", NULL, "ref", NULL);
 	clk_add_alias("uart", NULL, "ref", NULL);
@@ -397,9 +433,9 @@ static void __init qca955x_clocks_init(void)
 		ahb_rate = cpu_pll / (postdiv + 1);
 
 	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
+	clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+	clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+	clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
 
 	clk_add_alias("wdt", NULL, "ref", NULL);
 	clk_add_alias("uart", NULL, "ref", NULL);
@@ -419,8 +455,6 @@ void __init ath79_clocks_init(void)
 		qca955x_clocks_init();
 	else
 		BUG();
-
-	of_clk_init(NULL);
 }
 
 unsigned long __init
@@ -447,8 +481,49 @@ static void __init ath79_clocks_init_dt(struct device_node *np)
 
 CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt);
-CLK_OF_DECLARE(ar9130, "qca,ar9130-pll", ath79_clocks_init_dt);
-CLK_OF_DECLARE(ar9330, "qca,ar9330-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt);
 CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt);
+
+static void __init ath79_clocks_init_dt_ng(struct device_node *np)
+{
+	struct clk *ref_clk;
+	void __iomem *pll_base;
+	const char *dnfn = of_node_full_name(np);
+
+	ref_clk = of_clk_get(np, 0);
+	if (IS_ERR(ref_clk)) {
+		pr_err("%s: of_clk_get failed\n", dnfn);
+		goto err;
+	}
+
+	pll_base = of_iomap(np, 0);
+	if (!pll_base) {
+		pr_err("%s: can't map pll registers\n", dnfn);
+		goto err_clk;
+	}
+
+	if (of_device_is_compatible(np, "qca,ar9130-pll"))
+		ar724x_clk_init(ref_clk, pll_base);
+	else if (of_device_is_compatible(np, "qca,ar9330-pll"))
+		ar9330_clk_init(ref_clk, pll_base);
+	else {
+		pr_err("%s: could not find any appropriate clk_init()\n", dnfn);
+		goto err_clk;
+	}
+
+	if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
+		pr_err("%s: could not register clk provider\n", dnfn);
+		goto err_clk;
+	}
+
+	return;
+
+err_clk:
+	clk_put(ref_clk);
+
+err:
+	return;
+}
+CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
+CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
 #endif

arch/mips/ath79/common.c

@@ -46,12 +46,12 @@ void ath79_ddr_ctrl_init(void)
 {
 	ath79_ddr_base = ioremap_nocache(AR71XX_DDR_CTRL_BASE,
 					 AR71XX_DDR_CTRL_SIZE);
-	if (soc_is_ar71xx() || soc_is_ar934x()) {
-		ath79_ddr_wb_flush_base = ath79_ddr_base + 0x9c;
-		ath79_ddr_pci_win_base = ath79_ddr_base + 0x7c;
-	} else {
+	if (soc_is_ar913x() || soc_is_ar724x() || soc_is_ar933x()) {
 		ath79_ddr_wb_flush_base = ath79_ddr_base + 0x7c;
 		ath79_ddr_pci_win_base = 0;
+	} else {
+		ath79_ddr_wb_flush_base = ath79_ddr_base + 0x9c;
+		ath79_ddr_pci_win_base = ath79_ddr_base + 0x7c;
 	}
 }
 EXPORT_SYMBOL_GPL(ath79_ddr_ctrl_init);
@@ -76,14 +76,14 @@ void ath79_ddr_set_pci_windows(void)
 {
 	BUG_ON(!ath79_ddr_pci_win_base);
 
-	__raw_writel(AR71XX_PCI_WIN0_OFFS, ath79_ddr_pci_win_base + 0);
-	__raw_writel(AR71XX_PCI_WIN1_OFFS, ath79_ddr_pci_win_base + 1);
-	__raw_writel(AR71XX_PCI_WIN2_OFFS, ath79_ddr_pci_win_base + 2);
-	__raw_writel(AR71XX_PCI_WIN3_OFFS, ath79_ddr_pci_win_base + 3);
-	__raw_writel(AR71XX_PCI_WIN4_OFFS, ath79_ddr_pci_win_base + 4);
-	__raw_writel(AR71XX_PCI_WIN5_OFFS, ath79_ddr_pci_win_base + 5);
-	__raw_writel(AR71XX_PCI_WIN6_OFFS, ath79_ddr_pci_win_base + 6);
-	__raw_writel(AR71XX_PCI_WIN7_OFFS, ath79_ddr_pci_win_base + 7);
+	__raw_writel(AR71XX_PCI_WIN0_OFFS, ath79_ddr_pci_win_base + 0x0);
+	__raw_writel(AR71XX_PCI_WIN1_OFFS, ath79_ddr_pci_win_base + 0x4);
+	__raw_writel(AR71XX_PCI_WIN2_OFFS, ath79_ddr_pci_win_base + 0x8);
+	__raw_writel(AR71XX_PCI_WIN3_OFFS, ath79_ddr_pci_win_base + 0xc);
+	__raw_writel(AR71XX_PCI_WIN4_OFFS, ath79_ddr_pci_win_base + 0x10);
+	__raw_writel(AR71XX_PCI_WIN5_OFFS, ath79_ddr_pci_win_base + 0x14);
+	__raw_writel(AR71XX_PCI_WIN6_OFFS, ath79_ddr_pci_win_base + 0x18);
+	__raw_writel(AR71XX_PCI_WIN7_OFFS, ath79_ddr_pci_win_base + 0x1c);
 }
 EXPORT_SYMBOL_GPL(ath79_ddr_set_pci_windows);
 

arch/mips/ath79/setup.c

@@ -17,6 +17,7 @@
 #include <linux/bootmem.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
 
@@ -203,26 +204,57 @@ void __init plat_mem_setup(void)
 	fdt_start = fw_getenvl("fdt_start");
 	if (fdt_start)
 		__dt_setup_arch((void *)KSEG0ADDR(fdt_start));
-#ifdef CONFIG_BUILTIN_DTB
-	else
-		__dt_setup_arch(__dtb_start);
-#endif
+	else if (fw_arg0 == -2)
+		__dt_setup_arch((void *)KSEG0ADDR(fw_arg1));
 
-	ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
-					   AR71XX_RESET_SIZE);
-	ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
-					 AR71XX_PLL_SIZE);
-	ath79_detect_sys_type();
-	ath79_ddr_ctrl_init();
+	if (mips_machtype != ATH79_MACH_GENERIC_OF) {
+		ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
+						   AR71XX_RESET_SIZE);
+		ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
+						 AR71XX_PLL_SIZE);
+		ath79_detect_sys_type();
+		ath79_ddr_ctrl_init();
 
-	if (mips_machtype != ATH79_MACH_GENERIC_OF)
 		detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
 
-	_machine_restart = ath79_restart;
+		/* OF machines should use the reset driver */
+		_machine_restart = ath79_restart;
+	}
+
 	_machine_halt = ath79_halt;
 	pm_power_off = ath79_halt;
 }
 
+static void __init ath79_of_plat_time_init(void)
+{
+	struct device_node *np;
+	struct clk *clk;
+	unsigned long cpu_clk_rate;
+
+	of_clk_init(NULL);
+
+	np = of_get_cpu_node(0, NULL);
+	if (!np) {
+		pr_err("Failed to get CPU node\n");
+		return;
+	}
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
+		return;
+	}
+
+	cpu_clk_rate = clk_get_rate(clk);
+
+	pr_info("CPU clock: %lu.%03lu MHz\n",
+		cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000);
+
+	mips_hpt_frequency = cpu_clk_rate / 2;
+
+	clk_put(clk);
+}
+
 void __init plat_time_init(void)
 {
 	unsigned long cpu_clk_rate;
@@ -230,6 +262,11 @@ void __init plat_time_init(void)
 	unsigned long ddr_clk_rate;
 	unsigned long ref_clk_rate;
 
+	if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) {
+		ath79_of_plat_time_init();
+		return;
+	}
+
 	ath79_clocks_init();
 
 	cpu_clk_rate = ath79_get_sys_clk_rate("cpu");

arch/mips/bcm47xx/Makefile

@@ -3,5 +3,5 @@
 # under Linux.
 #
 
-obj-y				+= irq.o prom.o serial.o setup.o time.o sprom.o
+obj-y				+= irq.o prom.o serial.o setup.o time.o
 obj-y				+= board.o buttons.o leds.o workarounds.o

arch/mips/bcm47xx/bcm47xx_private.h

@@ -10,9 +10,6 @@
 /* prom.c */
 void __init bcm47xx_prom_highmem_init(void);
 
-/* sprom.c */
-void bcm47xx_sprom_register_fallbacks(void);
-
 /* buttons.c */
 int __init bcm47xx_buttons_register(void);
 

arch/mips/bcm47xx/setup.c

@@ -28,6 +28,7 @@
 
 #include "bcm47xx_private.h"
 
+#include <linux/bcm47xx_sprom.h>
 #include <linux/export.h>
 #include <linux/types.h>
 #include <linux/ethtool.h>
@@ -151,7 +152,6 @@ void __init plat_mem_setup(void)
 		pr_info("Using bcma bus\n");
 #ifdef CONFIG_BCM47XX_BCMA
 		bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
-		bcm47xx_sprom_register_fallbacks();
 		bcm47xx_register_bcma();
 		bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
 #ifdef CONFIG_HIGHMEM

arch/mips/bmips/Kconfig

@@ -21,6 +21,10 @@ config DT_BCM93384WVG_VIPER
 	bool "BCM93384WVG Viper CPU (EXPERIMENTAL)"
 	select BUILTIN_DTB
 
+config DT_BCM96358NB4SER
+	bool "BCM96358NB4SER"
+	select BUILTIN_DTB
+
 config DT_BCM96368MVWG
 	bool "BCM96368MVWG"
 	select BUILTIN_DTB

arch/mips/bmips/setup.c

@@ -95,6 +95,15 @@ static void bcm6328_quirks(void)
 		bcm63xx_fixup_cpu1();
 }
 
+static void bcm6358_quirks(void)
+{
+	/*
+	 * BCM6358 needs special handling for its shared TLB, so
+	 * disable SMP for now
+	 */
+	bmips_smp_enabled = 0;
+}
+
 static void bcm6368_quirks(void)
 {
 	bcm63xx_fixup_cpu1();
@@ -104,13 +113,16 @@ static const struct bmips_quirk bmips_quirk_list[] = {
 	{ "brcm,bcm3384-viper",		&bcm3384_viper_quirks		},
 	{ "brcm,bcm33843-viper",	&bcm3384_viper_quirks		},
 	{ "brcm,bcm6328",		&bcm6328_quirks			},
+	{ "brcm,bcm6358",		&bcm6358_quirks			},
 	{ "brcm,bcm6368",		&bcm6368_quirks			},
 	{ "brcm,bcm63168",		&bcm6368_quirks			},
+	{ "brcm,bcm63268",		&bcm6368_quirks			},
 	{ },
 };
 
 void __init prom_init(void)
 {
+	bmips_cpu_setup();
 	register_bmips_smp_ops();
 }
 

arch/mips/boot/compressed/Makefile

@@ -37,8 +37,13 @@ vmlinuzobjs-$(CONFIG_DEBUG_ZBOOT)		   += $(obj)/dbg.o
 vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
 vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM) += $(obj)/uart-prom.o
 vmlinuzobjs-$(CONFIG_MIPS_ALCHEMY)		   += $(obj)/uart-alchemy.o
+vmlinuzobjs-$(CONFIG_ATH79)			   += $(obj)/uart-ath79.o
 endif
 
+extra-y += uart-ath79.c
+$(obj)/uart-ath79.c: $(srctree)/arch/mips/ath79/early_printk.c
+	$(call cmd,shipped)
+
 vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o $(obj)/bswapsi.o
 
 extra-y += ashldi3.c bswapsi.c

arch/mips/boot/dts/brcm/Makefile

@@ -1,5 +1,6 @@
 dtb-$(CONFIG_DT_BCM93384WVG)		+= bcm93384wvg.dtb
 dtb-$(CONFIG_DT_BCM93384WVG_VIPER)	+= bcm93384wvg_viper.dtb
+dtb-$(CONFIG_DT_BCM96358NB4SER)		+= bcm96358nb4ser.dtb
 dtb-$(CONFIG_DT_BCM96368MVWG)		+= bcm96368mvwg.dtb
 dtb-$(CONFIG_DT_BCM9EJTAGPRB)		+= bcm9ejtagprb.dtb
 dtb-$(CONFIG_DT_BCM97125CBMB)		+= bcm97125cbmb.dtb
@@ -14,6 +15,7 @@ dtb-$(CONFIG_DT_BCM97435SVMB)		+= bcm97435svmb.dtb
 dtb-$(CONFIG_DT_NONE)			+= \
 						bcm93384wvg.dtb		\
 						bcm93384wvg_viper.dtb	\
+						bcm96358nb4ser.dtb	\
 						bcm96368mvwg.dtb	\
 						bcm9ejtagprb.dtb	\
 						bcm97125cbmb.dtb	\

arch/mips/boot/dts/brcm/bcm6328.dtsi

@@ -23,7 +23,7 @@
 	};
 
 	clocks {
-		periph_clk: periph_clk {
+		periph_clk: periph-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <50000000>;
@@ -31,11 +31,11 @@
 	};
 
 	aliases {
-		leds0 = &leds0;
-		uart0 = &uart0;
+		serial0 = &uart0;
+		serial1 = &uart1;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -50,16 +50,16 @@
 		compatible = "simple-bus";
 		ranges;
 
-		periph_intc: periph_intc@10000020 {
-			compatible = "brcm,bcm3380-l2-intc";
-			reg = <0x10000024 0x4 0x1000002c 0x4>,
-			      <0x10000020 0x4 0x10000028 0x4>;
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&cpu_intc>;
-			interrupts = <2>;
+			interrupts = <2>, <3>;
 		};
 
 		uart0: serial@10000100 {
@@ -71,13 +71,22 @@
 			status = "disabled";
 		};
 
-		timer: timer@10000040 {
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <39>;
+			clocks = <&periph_clk>;
+			status = "disabled";
+		};
+
+		timer: syscon@10000040 {
 			compatible = "syscon";
 			reg = <0x10000040 0x2c>;
 			native-endian;
 		};
 
-		reboot {
+		reboot: syscon-reboot@10000068 {
 			compatible = "syscon-reboot";
 			regmap = <&timer>;
 			offset = <0x28>;
@@ -91,5 +100,24 @@
 			reg = <0x10000800 0x24>;
 			status = "disabled";
 		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm6328-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <42>;
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm6328-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <41>;
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm6358.dtsi

@@ -0,0 +1,130 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6358";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <150000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@fffe0000 {
+			compatible = "syscon";
+			reg = <0xfffe0000 0xc>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@fffe0008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@fffe000c {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0xfffe000c 0x8>,
+			      <0xfffe0038 0x8>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		leds0: led-controller@fffe00d0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-leds";
+			reg = <0xfffe00d0 0x8>;
+
+			status = "disabled";
+		};
+
+		uart0: serial@fffe0100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@fffe0120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@fffe1300 {
+			compatible = "brcm,bcm6358-ehci", "generic-ehci";
+			reg = <0xfffe1300 0x100>;
+			big-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+			status = "disabled";
+		};
+
+		ohci: usb@fffe1400 {
+			compatible = "brcm,bcm6358-ohci", "generic-ohci";
+			reg = <0xfffe1400 0x100>;
+			big-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <5>;
+			status = "disabled";
+		};
+	};
+};

arch/mips/boot/dts/brcm/bcm6368.dtsi

@@ -20,11 +20,10 @@
 			device_type = "cpu";
 			reg = <1>;
 		};
-
 	};
 
 	clocks {
-		periph_clk: periph_clk {
+		periph_clk: periph-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <50000000>;
@@ -32,11 +31,11 @@
 	};
 
 	aliases {
-		leds0 = &leds0;
-		uart0 = &uart0;
+		serial0 = &uart0;
+		serial1 = &uart1;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -64,16 +63,16 @@
 			mask = <0x1>;
 		};
 
-		periph_intc: periph_intc@10000020 {
-			compatible = "brcm,bcm3380-l2-intc";
-			reg = <0x10000024 0x4 0x1000002c 0x4>,
-			      <0x10000020 0x4 0x10000028 0x4>;
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&cpu_intc>;
-			interrupts = <2>;
+			interrupts = <2>, <3>;
 		};
 
 		leds0: led-controller@100000d0 {
@@ -93,7 +92,16 @@
 			status = "disabled";
 		};
 
-		ehci0: usb@10001500 {
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+			clocks = <&periph_clk>;
+			status = "disabled";
+		};
+
+		ehci: usb@10001500 {
 			compatible = "brcm,bcm6368-ehci", "generic-ehci";
 			reg = <0x10001500 0x100>;
 			big-endian;
@@ -102,7 +110,7 @@
 			status = "disabled";
 		};
 
-		ohci0: usb@10001600 {
+		ohci: usb@10001600 {
 			compatible = "brcm,bcm6368-ohci", "generic-ohci";
 			reg = <0x10001600 0x100>;
 			big-endian;

arch/mips/boot/dts/brcm/bcm7125.dtsi

@@ -85,14 +85,15 @@
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
-			brcm,int-map-mask = <0x44>;
+			brcm,int-map-mask = <0x44>, <0xf000000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <18>;
+			interrupts = <18>, <19>;
+			interrupt-names = "upg_main", "upg_bsc";
 		};
 
 		sun_top_ctrl: syscon@404000 {
@@ -118,6 +119,70 @@
 			status = "disabled";
 		};
 
+		uart1: serial@406b40 {
+			compatible = "ns16550a";
+			reg = <0x406b40 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <64>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@406b80 {
+			compatible = "ns16550a";
+			reg = <0x406b80 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <65>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@406380 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406380 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
 		ehci0: usb@488300 {
 			compatible = "brcm,bcm7125-ehci", "generic-ehci";
 			reg = <0x488300 0x100>;

arch/mips/boot/dts/brcm/bcm7346.dtsi

@@ -24,8 +24,6 @@
 
 	aliases {
 		uart0 = &uart0;
-		uart1 = &uart1;
-		uart2 = &uart2;
 	};
 
 	cpu_intc: cpu_intc {
@@ -323,8 +321,6 @@
 			interrupts = <40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			brcm,broken-ncq;
-			brcm,broken-phy;
 			status = "disabled";
 
 			sata0: sata-port@0 {
@@ -338,7 +334,7 @@
 			};
 		};
 
-		sata_phy: sata-phy@1800000 {
+		sata_phy: sata-phy@180100 {
 			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
 			reg = <0x180100 0x0eff>;
 			reg-names = "phy";

arch/mips/boot/dts/brcm/bcm7358.dtsi

@@ -18,8 +18,6 @@
 
 	aliases {
 		uart0 = &uart0;
-		uart1 = &uart1;
-		uart2 = &uart2;
 	};
 
 	cpu_intc: cpu_intc {

arch/mips/boot/dts/brcm/bcm7360.dtsi

@@ -18,8 +18,6 @@
 
 	aliases {
 		uart0 = &uart0;
-		uart1 = &uart1;
-		uart2 = &uart2;
 	};
 
 	cpu_intc: cpu_intc {
@@ -241,5 +239,45 @@
 			interrupts = <66>;
 			status = "disabled";
 		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <86>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@180100 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7362.dtsi

@@ -24,8 +24,6 @@
 
 	aliases {
 		uart0 = &uart0;
-		uart1 = &uart1;
-		uart2 = &uart2;
 	};
 
 	cpu_intc: cpu_intc {
@@ -246,8 +244,6 @@
 			interrupts = <86>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			brcm,broken-ncq;
-			brcm,broken-phy;
 			status = "disabled";
 
 			sata0: sata-port@0 {
@@ -261,7 +257,7 @@
 			};
 		};
 
-		sata_phy: sata-phy@1800000 {
+		sata_phy: sata-phy@180100 {
 			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
 			reg = <0x180100 0x0eff>;
 			reg-names = "phy";

arch/mips/boot/dts/brcm/bcm7420.dtsi

@@ -86,14 +86,15 @@
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
-			brcm,int-map-mask = <0x44>;
+			brcm,int-map-mask = <0x44>, <0x1f000000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <18>;
+			interrupts = <18>, <19>;
+			interrupt-names = "upg_main", "upg_bsc";
 		};
 
 		sun_top_ctrl: syscon@404000 {
@@ -118,6 +119,78 @@
 			status = "disabled";
 		};
 
+		uart1: serial@406b40 {
+			compatible = "ns16550a";
+			reg = <0x406b40 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <64>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@406b80 {
+			compatible = "ns16550a";
+			reg = <0x406b80 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <65>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@406380 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406380 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		bsce: i2c@406800 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406800 0x58>;
+		      interrupts = <28>;
+		      interrupt-names = "upg_bsce";
+		      status = "disabled";
+		};
+
 		enet0: ethernet@468000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;

arch/mips/boot/dts/brcm/bcm7425.dtsi

@@ -87,14 +87,32 @@
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
-			brcm,int-map-mask = <0x44>;
+			brcm,int-map-mask = <0x44>, <0x7000000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <55>;
+			interrupts = <55>, <53>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x409480 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <56>, <54>, <59>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
 		};
 
 		sun_top_ctrl: syscon@404000 {
@@ -119,6 +137,78 @@
 			status = "disabled";
 		};
 
+		uart1: serial@406b40 {
+			compatible = "ns16550a";
+			reg = <0x406b40 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <62>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@406b80 {
+			compatible = "ns16550a";
+			reg = <0x406b80 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <63>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		bsca: i2c@409180 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x409180 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@409400 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x409400 0x58>;
+		      interrupts = <28>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		bsce: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bsce";
+		      status = "disabled";
+		};
+
 		enet0: ethernet@b80000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -227,11 +317,9 @@
 			reg-names = "ahci", "top-ctrl";
 			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <40>;
+			interrupts = <41>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			brcm,broken-ncq;
-			brcm,broken-phy;
 			status = "disabled";
 
 			sata0: sata-port@0 {
@@ -245,7 +333,7 @@
 			};
 		};
 
-		sata_phy: sata-phy@1800000 {
+		sata_phy: sata-phy@180100 {
 			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
 			reg = <0x180100 0x0eff>;
 			reg-names = "phy";

arch/mips/boot/dts/brcm/bcm7435.dtsi

@@ -7,7 +7,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		mips-hpt-frequency = <163125000>;
+		mips-hpt-frequency = <175625000>;
 
 		cpu@0 {
 			compatible = "brcm,bmips5200";
@@ -63,13 +63,14 @@
 
 		periph_intc: periph_intc@41b500 {
 			compatible = "brcm,bcm7038-l1-intc";
-			reg = <0x41b500 0x40>, <0x41b600 0x40>;
+			reg = <0x41b500 0x40>, <0x41b600 0x40>,
+				<0x41b700 0x40>, <0x41b800 0x40>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&cpu_intc>;
-			interrupts = <2>, <3>;
+			interrupts = <2>, <3>, <2>, <3>;
 		};
 
 		sun_l2_intc: sun_l2_intc@403000 {
@@ -101,14 +102,32 @@
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
-			brcm,int-map-mask = <0x44>;
+			brcm,int-map-mask = <0x44>, <0x7000000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <60>;
+			interrupts = <60>, <58>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x409480 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <61>, <59>, <64>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
 		};
 
 		sun_top_ctrl: syscon@404000 {
@@ -133,6 +152,78 @@
 			status = "disabled";
 		};
 
+		uart1: serial@406b40 {
+			compatible = "ns16550a";
+			reg = <0x406b40 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <67>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@406b80 {
+			compatible = "ns16550a";
+			reg = <0x406b80 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <68>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		bsca: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@409400 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x409400 0x58>;
+		      interrupts = <28>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		bsce: i2c@409180 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x409180 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bsce";
+		      status = "disabled";
+		};
+
 		enet0: ethernet@b80000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -235,5 +326,45 @@
 			interrupts = <78>;
 			status = "disabled";
 		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <45>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@180100 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm96358nb4ser.dts

@@ -0,0 +1,46 @@
+/dts-v1/;
+
+/include/ "bcm6358.dtsi"
+
+/ {
+	compatible = "sfr,nb4-ser", "brcm,bcm6358";
+	model = "SFR Neufbox 4 (Sercomm)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+};
+
+&leds0 {
+	status = "ok";
+
+	led@0 {
+		reg = <0>;
+		active-low;
+		label = "nb4-ser:white:alarm";
+	};
+	led@2 {
+		reg = <2>;
+		active-low;
+		label = "nb4-ser:white:tv";
+	};
+	led@3 {
+		reg = <3>;
+		active-low;
+		label = "nb4-ser:white:tel";
+	};
+	led@4 {
+		reg = <4>;
+		active-low;
+		label = "nb4-ser:white:adsl";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm96368mvwg.dts

@@ -22,10 +22,10 @@
 };
 
 /* FIXME: need to set up USB_CTRL registers first */
-&ehci0 {
+&ehci {
 	status = "disabled";
 };
 
-&ohci0 {
+&ohci {
 	status = "disabled";
 };

arch/mips/boot/dts/brcm/bcm97125cbmb.dts

@@ -21,6 +21,30 @@
 	status = "okay";
 };
 
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
 /* FIXME: USB is wonky; disable it for now */
 &ehci0 {
 	status = "disabled";

arch/mips/boot/dts/brcm/bcm97360svmb.dts

@@ -56,3 +56,11 @@
 &ohci0 {
 	status = "okay";
 };
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97420c.dts

@@ -23,6 +23,34 @@
 	status = "okay";
 };
 
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&bsce {
+	status = "okay";
+};
+
 /* FIXME: MAC driver comes up but cannot attach to PHY */
 &enet0 {
 	status = "disabled";

arch/mips/boot/dts/brcm/bcm97425svmb.dts

@@ -23,6 +23,34 @@
 	status = "okay";
 };
 
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&bsce {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };

arch/mips/boot/dts/brcm/bcm97435svmb.dts

@@ -14,7 +14,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200 maxcpus=1";
+		bootargs = "console=ttyS0,115200";
 		stdout-path = &uart0;
 	};
 };
@@ -23,6 +23,34 @@
 	status = "okay";
 };
 
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&bsce {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -58,3 +86,11 @@
 &ohci3 {
 	status = "okay";
 };
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};

arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts

@@ -0,0 +1,78 @@
+/*
+ * Device tree source for D-Link DSR-1000N.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+	model = "dlink,dsr-1000n";
+
+	soc@0 {
+		smi0: mdio@1180000001800 {
+			phy8: ethernet-phy@8 {
+				reg = <8>;
+				compatible = "ethernet-phy-ieee802.3-c22";
+			};
+		};
+
+		pip: pip@11800a0000000 {
+			interface@0 {
+				ethernet@0 {
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@1 {
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@2 {
+					phy-handle = <&phy8>;
+				};
+			};
+		};
+
+		twsi0: i2c@1180000001000 {
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		uart0: serial@1180000000800 {
+			clock-frequency = <500000000>;
+		};
+
+		usbn: usbn@1180068000000 {
+			refclk-frequency = <12000000>;
+			refclk-type = "crystal";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb1 {
+			label = "usb1";
+			gpios = <&gpio 9 1>; /* Active low */
+		};
+
+		usb2 {
+			label = "usb2";
+			gpios = <&gpio 10 1>; /* Active low */
+		};
+	};
+
+	aliases {
+		pip = &pip;
+	};
+};

arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts

@@ -1,4 +1,3 @@
-/dts-v1/;
 /*
  * OCTEON 3XXX, 5XXX, 63XX device tree skeleton.
  *
@@ -6,56 +5,12 @@
  * use.	 Because of this, it contains a super-set of the available
  * devices and properties.
  */
-/ {
-	compatible = "cavium,octeon-3860";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&ciu>;
-
-	soc@0 {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges; /* Direct mapping */
-
-		ciu: interrupt-controller@1070000000000 {
-			compatible = "cavium,octeon-3860-ciu";
-			interrupt-controller;
-			/* Interrupts are specified by two parts:
-			 * 1) Controller register (0 or 1)
-			 * 2) Bit within the register (0..63)
-			 */
-			#interrupt-cells = <2>;
-			reg = <0x10700 0x00000000 0x0 0x7000>;
-		};
 
-		gpio: gpio-controller@1070000000800 {
-			#gpio-cells = <2>;
-			compatible = "cavium,octeon-3860-gpio";
-			reg = <0x10700 0x00000800 0x0 0x100>;
-			gpio-controller;
-			/* Interrupts are specified by two parts:
-			 * 1) GPIO pin number (0..15)
-			 * 2) Triggering (1 - edge rising
-			 *		  2 - edge falling
-			 *		  4 - level active high
-			 *		  8 - level active low)
-			 */
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			/* The GPIO pin connect to 16 consecutive CUI bits */
-			interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
-				     <0 20>, <0 21>, <0 22>, <0 23>,
-				     <0 24>, <0 25>, <0 26>, <0 27>,
-				     <0 28>, <0 29>, <0 30>, <0 31>;
-		};
+/include/ "octeon_3xxx.dtsi"
 
+/ {
+	soc@0 {
 		smi0: mdio@1180000001800 {
-			compatible = "cavium,octeon-3860-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x11800 0x00001800 0x0 0x40>;
-
 			phy0: ethernet-phy@0 {
 				compatible = "marvell,88e1118";
 				marvell,reg-init =
@@ -220,35 +175,16 @@
 		};
 
 		pip: pip@11800a0000000 {
-			compatible = "cavium,octeon-3860-pip";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x11800 0xa0000000 0x0 0x2000>;
-
 			interface@0 {
-				compatible = "cavium,octeon-3860-pip-interface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>; /* interface */
-
 				ethernet@0 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x0>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
 					phy-handle = <&phy2>;
 					cavium,alt-phy-handle = <&phy100>;
 				};
 				ethernet@1 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x1>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
 					phy-handle = <&phy3>;
 					cavium,alt-phy-handle = <&phy101>;
 				};
 				ethernet@2 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x2>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
 					phy-handle = <&phy4>;
 					cavium,alt-phy-handle = <&phy102>;
 				};
@@ -322,11 +258,6 @@
 			};
 
 			interface@1 {
-				compatible = "cavium,octeon-3860-pip-interface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <1>; /* interface */
-
 				ethernet@0 {
 					compatible = "cavium,octeon-3860-pip-port";
 					reg = <0x0>; /* Port */
@@ -355,13 +286,6 @@
 		};
 
 		twsi0: i2c@1180000001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "cavium,octeon-3860-twsi";
-			reg = <0x11800 0x00001000 0x0 0x200>;
-			interrupts = <0 45>;
-			clock-frequency = <100000>;
-
 			rtc@68 {
 				compatible = "dallas,ds1337";
 				reg = <0x68>;
@@ -381,15 +305,6 @@
 			clock-frequency = <100000>;
 		};
 
-		uart0: serial@1180000000800 {
-			compatible = "cavium,octeon-3860-uart","ns16550";
-			reg = <0x11800 0x00000800 0x0 0x400>;
-			clock-frequency = <0>;
-			current-speed = <115200>;
-			reg-shift = <3>;
-			interrupts = <0 34>;
-		};
-
 		uart1: serial@1180000000c00 {
 			compatible = "cavium,octeon-3860-uart","ns16550";
 			reg = <0x11800 0x00000c00 0x0 0x400>;
@@ -409,98 +324,6 @@
 		};
 
 		bootbus: bootbus@1180000000000 {
-			compatible = "cavium,octeon-3860-bootbus";
-			reg = <0x11800 0x00000000 0x0 0x200>;
-			/* The chip select number and offset */
-			#address-cells = <2>;
-			/* The size of the chip select region */
-			#size-cells = <1>;
-			ranges = <0 0  0x0 0x1f400000  0xc00000>,
-				 <1 0  0x10000 0x30000000  0>,
-				 <2 0  0x10000 0x40000000  0>,
-				 <3 0  0x10000 0x50000000  0>,
-				 <4 0  0x0 0x1d020000  0x10000>,
-				 <5 0  0x0 0x1d040000  0x10000>,
-				 <6 0  0x0 0x1d050000  0x10000>,
-				 <7 0  0x10000 0x90000000  0>;
-
-			cavium,cs-config@0 {
-				compatible = "cavium,octeon-3860-bootbus-config";
-				cavium,cs-index = <0>;
-				cavium,t-adr  = <20>;
-				cavium,t-ce   = <60>;
-				cavium,t-oe   = <60>;
-				cavium,t-we   = <45>;
-				cavium,t-rd-hld = <35>;
-				cavium,t-wr-hld = <45>;
-				cavium,t-pause	= <0>;
-				cavium,t-wait	= <0>;
-				cavium,t-page	= <35>;
-				cavium,t-rd-dly = <0>;
-
-				cavium,pages	 = <0>;
-				cavium,bus-width = <8>;
-			};
-			cavium,cs-config@4 {
-				compatible = "cavium,octeon-3860-bootbus-config";
-				cavium,cs-index = <4>;
-				cavium,t-adr  = <320>;
-				cavium,t-ce   = <320>;
-				cavium,t-oe   = <320>;
-				cavium,t-we   = <320>;
-				cavium,t-rd-hld = <320>;
-				cavium,t-wr-hld = <320>;
-				cavium,t-pause	= <320>;
-				cavium,t-wait	= <320>;
-				cavium,t-page	= <320>;
-				cavium,t-rd-dly = <0>;
-
-				cavium,pages	 = <0>;
-				cavium,bus-width = <8>;
-			};
-			cavium,cs-config@5 {
-				compatible = "cavium,octeon-3860-bootbus-config";
-				cavium,cs-index = <5>;
-				cavium,t-adr  = <5>;
-				cavium,t-ce   = <300>;
-				cavium,t-oe   = <125>;
-				cavium,t-we   = <150>;
-				cavium,t-rd-hld = <100>;
-				cavium,t-wr-hld = <30>;
-				cavium,t-pause	= <0>;
-				cavium,t-wait	= <30>;
-				cavium,t-page	= <320>;
-				cavium,t-rd-dly = <0>;
-
-				cavium,pages	 = <0>;
-				cavium,bus-width = <16>;
-			};
-			cavium,cs-config@6 {
-				compatible = "cavium,octeon-3860-bootbus-config";
-				cavium,cs-index = <6>;
-				cavium,t-adr  = <5>;
-				cavium,t-ce   = <300>;
-				cavium,t-oe   = <270>;
-				cavium,t-we   = <150>;
-				cavium,t-rd-hld = <100>;
-				cavium,t-wr-hld = <70>;
-				cavium,t-pause	= <0>;
-				cavium,t-wait	= <0>;
-				cavium,t-page	= <320>;
-				cavium,t-rd-dly = <0>;
-
-				cavium,pages	 = <0>;
-				cavium,wait-mode;
-				cavium,bus-width = <16>;
-			};
-
-			flash0: nor@0,0 {
-				compatible = "cfi-flash";
-				reg = <0 0 0x800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-			};
-
 			led0: led-display@4,0 {
 				compatible = "avago,hdsp-253x";
 				reg = <4 0x20 0x20>, <4 0 0x20>;
@@ -515,17 +338,6 @@
 			};
 		};
 
-		dma0: dma-engine@1180000000100 {
-			compatible = "cavium,octeon-5750-bootbus-dma";
-			reg = <0x11800 0x00000100 0x0 0x8>;
-			interrupts = <0 63>;
-		};
-		dma1: dma-engine@1180000000108 {
-			compatible = "cavium,octeon-5750-bootbus-dma";
-			reg = <0x11800 0x00000108 0x0 0x8>;
-			interrupts = <0 63>;
-		};
-
 		uctl: uctl@118006f000000 {
 			compatible = "cavium,octeon-6335-uctl";
 			reg = <0x11800 0x6f000000 0x0 0x100>;
@@ -552,21 +364,10 @@
 		};
 
 		usbn: usbn@1180068000000 {
-			compatible = "cavium,octeon-5750-usbn";
-			reg = <0x11800 0x68000000 0x0 0x1000>;
-			ranges; /* Direct mapping */
-			#address-cells = <2>;
-			#size-cells = <2>;
 			/* 12MHz, 24MHz and 48MHz allowed */
 			refclk-frequency = <12000000>;
 			/* Either "crystal" or "external" */
 			refclk-type = "crystal";
-
-			usbc@16f0010000000 {
-				compatible = "cavium,octeon-5750-usbc";
-				reg = <0x16f00 0x10000000 0x0 0x80000>;
-				interrupts = <0 56>;
-			};
 		};
 	};
 

arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi

@@ -0,0 +1,231 @@
+/* OCTEON 3XXX DTS common parts. */
+
+/dts-v1/;
+
+/ {
+	compatible = "cavium,octeon-3860";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&ciu>;
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges; /* Direct mapping */
+
+		ciu: interrupt-controller@1070000000000 {
+			compatible = "cavium,octeon-3860-ciu";
+			interrupt-controller;
+			/* Interrupts are specified by two parts:
+			 * 1) Controller register (0 or 1)
+			 * 2) Bit within the register (0..63)
+			 */
+			#interrupt-cells = <2>;
+			reg = <0x10700 0x00000000 0x0 0x7000>;
+		};
+
+		gpio: gpio-controller@1070000000800 {
+			#gpio-cells = <2>;
+			compatible = "cavium,octeon-3860-gpio";
+			reg = <0x10700 0x00000800 0x0 0x100>;
+			gpio-controller;
+			/* Interrupts are specified by two parts:
+			 * 1) GPIO pin number (0..15)
+			 * 2) Triggering (1 - edge rising
+			 *		  2 - edge falling
+			 *		  4 - level active high
+			 *		  8 - level active low)
+			 */
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			/* The GPIO pin connect to 16 consecutive CUI bits */
+			interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
+				     <0 20>, <0 21>, <0 22>, <0 23>,
+				     <0 24>, <0 25>, <0 26>, <0 27>,
+				     <0 28>, <0 29>, <0 30>, <0 31>;
+		};
+
+		smi0: mdio@1180000001800 {
+			compatible = "cavium,octeon-3860-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x11800 0x00001800 0x0 0x40>;
+		};
+
+		pip: pip@11800a0000000 {
+			compatible = "cavium,octeon-3860-pip";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x11800 0xa0000000 0x0 0x2000>;
+
+			interface@0 {
+				compatible = "cavium,octeon-3860-pip-interface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>; /* interface */
+
+				ethernet@0 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x0>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@1 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x1>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@2 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x2>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+			};
+
+			interface@1 {
+				compatible = "cavium,octeon-3860-pip-interface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>; /* interface */
+			};
+		};
+
+		twsi0: i2c@1180000001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "cavium,octeon-3860-twsi";
+			reg = <0x11800 0x00001000 0x0 0x200>;
+			interrupts = <0 45>;
+			clock-frequency = <100000>;
+		};
+
+		uart0: serial@1180000000800 {
+			compatible = "cavium,octeon-3860-uart","ns16550";
+			reg = <0x11800 0x00000800 0x0 0x400>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			reg-shift = <3>;
+			interrupts = <0 34>;
+		};
+
+		bootbus: bootbus@1180000000000 {
+			compatible = "cavium,octeon-3860-bootbus";
+			reg = <0x11800 0x00000000 0x0 0x200>;
+			/* The chip select number and offset */
+			#address-cells = <2>;
+			/* The size of the chip select region */
+			#size-cells = <1>;
+			ranges = <0 0  0x0 0x1f400000  0xc00000>,
+				 <1 0  0x10000 0x30000000  0>,
+				 <2 0  0x10000 0x40000000  0>,
+				 <3 0  0x10000 0x50000000  0>,
+				 <4 0  0x0 0x1d020000  0x10000>,
+				 <5 0  0x0 0x1d040000  0x10000>,
+				 <6 0  0x0 0x1d050000  0x10000>,
+				 <7 0  0x10000 0x90000000  0>;
+
+			cavium,cs-config@0 {
+				compatible = "cavium,octeon-3860-bootbus-config";
+				cavium,cs-index = <0>;
+				cavium,t-adr  = <20>;
+				cavium,t-ce   = <60>;
+				cavium,t-oe   = <60>;
+				cavium,t-we   = <45>;
+				cavium,t-rd-hld = <35>;
+				cavium,t-wr-hld = <45>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <0>;
+				cavium,t-page	= <35>;
+				cavium,t-rd-dly = <0>;
+
+				cavium,pages	 = <0>;
+				cavium,bus-width = <8>;
+			};
+			cavium,cs-config@4 {
+				compatible = "cavium,octeon-3860-bootbus-config";
+				cavium,cs-index = <4>;
+				cavium,t-adr  = <320>;
+				cavium,t-ce   = <320>;
+				cavium,t-oe   = <320>;
+				cavium,t-we   = <320>;
+				cavium,t-rd-hld = <320>;
+				cavium,t-wr-hld = <320>;
+				cavium,t-pause	= <320>;
+				cavium,t-wait	= <320>;
+				cavium,t-page	= <320>;
+				cavium,t-rd-dly = <0>;
+
+				cavium,pages	 = <0>;
+				cavium,bus-width = <8>;
+			};
+			cavium,cs-config@5 {
+				compatible = "cavium,octeon-3860-bootbus-config";
+				cavium,cs-index = <5>;
+				cavium,t-adr  = <5>;
+				cavium,t-ce   = <300>;
+				cavium,t-oe   = <125>;
+				cavium,t-we   = <150>;
+				cavium,t-rd-hld = <100>;
+				cavium,t-wr-hld = <30>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <30>;
+				cavium,t-page	= <320>;
+				cavium,t-rd-dly = <0>;
+
+				cavium,pages	 = <0>;
+				cavium,bus-width = <16>;
+			};
+			cavium,cs-config@6 {
+				compatible = "cavium,octeon-3860-bootbus-config";
+				cavium,cs-index = <6>;
+				cavium,t-adr  = <5>;
+				cavium,t-ce   = <300>;
+				cavium,t-oe   = <270>;
+				cavium,t-we   = <150>;
+				cavium,t-rd-hld = <100>;
+				cavium,t-wr-hld = <70>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <0>;
+				cavium,t-page	= <320>;
+				cavium,t-rd-dly = <0>;
+
+				cavium,pages	 = <0>;
+				cavium,wait-mode;
+				cavium,bus-width = <16>;
+			};
+
+			flash0: nor@0,0 {
+				compatible = "cfi-flash";
+				reg = <0 0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
+		dma0: dma-engine@1180000000100 {
+			compatible = "cavium,octeon-5750-bootbus-dma";
+			reg = <0x11800 0x00000100 0x0 0x8>;
+			interrupts = <0 63>;
+		};
+
+		dma1: dma-engine@1180000000108 {
+			compatible = "cavium,octeon-5750-bootbus-dma";
+			reg = <0x11800 0x00000108 0x0 0x8>;
+			interrupts = <0 63>;
+		};
+
+		usbn: usbn@1180068000000 {
+			compatible = "cavium,octeon-5750-usbn";
+			reg = <0x11800 0x68000000 0x0 0x1000>;
+			ranges; /* Direct mapping */
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			usbc@16f0010000000 {
+				compatible = "cavium,octeon-5750-usbc";
+				reg = <0x16f00 0x10000000 0x0 0x80000>;
+				interrupts = <0 56>;
+			};
+		};
+	};
+};

arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts

@@ -0,0 +1,59 @@
+/*
+ * Device tree source for EdgeRouter Lite.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+	model = "ubnt,e100";
+
+	soc@0 {
+		smi0: mdio@1180000001800 {
+			phy5: ethernet-phy@5 {
+				reg = <5>;
+				compatible = "ethernet-phy-ieee802.3-c22";
+			};
+			phy6: ethernet-phy@6 {
+				reg = <6>;
+				compatible = "ethernet-phy-ieee802.3-c22";
+			};
+			phy7: ethernet-phy@7 {
+				reg = <7>;
+				compatible = "ethernet-phy-ieee802.3-c22";
+			};
+		};
+
+		pip: pip@11800a0000000 {
+			interface@0 {
+				ethernet@0 {
+					phy-handle = <&phy7>;
+				};
+				ethernet@1 {
+					phy-handle = <&phy6>;
+				};
+				ethernet@2 {
+					phy-handle = <&phy5>;
+				};
+			};
+		};
+
+		uart0: serial@1180000000800 {
+			clock-frequency = <500000000>;
+		};
+
+		usbn: usbn@1180068000000 {
+			refclk-frequency = <12000000>;
+			refclk-type = "crystal";
+		};
+	};
+
+	aliases {
+		pip = &pip;
+	};
+};

arch/mips/boot/dts/ingenic/jz4740.dtsi

@@ -65,4 +65,18 @@
 		clocks = <&ext>, <&cgu JZ4740_CLK_UART1>;
 		clock-names = "baud", "module";
 	};
+
+	uhc: uhc@13030000 {
+		compatible = "ingenic,jz4740-ohci", "generic-ohci";
+		reg = <0x13030000 0x1000>;
+
+		clocks = <&cgu JZ4740_CLK_UHC>;
+		assigned-clocks = <&cgu JZ4740_CLK_UHC>;
+		assigned-clock-rates = <48000000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <3>;
+
+		status = "disabled";
+	};
 };

arch/mips/boot/dts/lantiq/easy50712.dts

@@ -52,7 +52,7 @@
 		};
 
 		gpio: pinmux@E100B10 {
-			compatible = "lantiq,pinctrl-xway";
+			compatible = "lantiq,danube-pinctrl";
 			pinctrl-names = "default";
 			pinctrl-0 = <&state_default>;
 

arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi

@@ -1,236 +0,0 @@
-/*
- * Device Tree Source for PIC32MZDA clock data
- *
- * Purna Chandra Mandal <purna.mandal@microchip.com>
- * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
- *
- * Licensed under GPLv2 or later.
- */
-
-/* all fixed rate clocks */
-
-/ {
-	POSC:posc_clk { /* On-chip primary oscillator */
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	FRC:frc_clk { /* internal FRC oscillator */
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <8000000>;
-	};
-
-	BFRC:bfrc_clk { /* internal backup FRC oscillator */
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <8000000>;
-	};
-
-	LPRC:lprc_clk { /* internal low-power FRC oscillator */
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-	};
-
-	/* UPLL provides clock to USBCORE */
-	UPLL:usb_phy_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "usbphy_clk";
-	};
-
-	TxCKI:txcki_clk { /* external clock input on TxCLKI pin */
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <4000000>;
-		status = "disabled";
-	};
-
-	/* external clock input on REFCLKIx pin */
-	REFIx:refix_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		status = "disabled";
-	};
-
-	/* PIC32 specific clks */
-	pic32_clktree {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x1f801200 0x200>;
-		compatible = "microchip,pic32mzda-clk";
-		ranges = <0 0x1f801200 0x200>;
-
-		/* secondary oscillator; external input on SOSCI pin */
-		SOSC:sosc_clk@0 {
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-sosc";
-			clock-frequency = <32768>;
-			reg = <0x000 0x10>,   /* enable reg */
-			      <0x1d0 0x10>; /* status reg */
-			microchip,bit-mask = <0x02>; /* enable mask */
-			microchip,status-bit-mask = <0x10>; /* status-mask*/
-		};
-
-		FRCDIV:frcdiv_clk {
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-frcdivclk";
-			clocks = <&FRC>;
-			clock-output-names = "frcdiv_clk";
-		};
-
-		/* System PLL clock */
-		SYSPLL:spll_clk@020 {
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-syspll";
-			reg = <0x020 0x10>, /* SPLL register */
-			      <0x1d0 0x10>; /* CLKSTAT register */
-			clocks = <&POSC>, <&FRC>;
-			clock-output-names = "sys_pll";
-			microchip,status-bit-mask = <0x80>; /* SPLLRDY */
-		};
-
-		/* system clock; mux with postdiv & slew */
-		SYSCLK:sys_clk@1c0 {
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-sysclk-v2";
-			reg = <0x1c0 0x04>; /* SLEWCON */
-			clocks = <&FRCDIV>, <&SYSPLL>, <&POSC>, <&SOSC>,
-				 <&LPRC>, <&FRCDIV>;
-			microchip,clock-indices = <0>, <1>, <2>, <4>,
-						  <5>, <7>;
-			clock-output-names = "sys_clk";
-		};
-
-		/* Peripheral bus1 clock */
-		PBCLK1:pb1_clk@140 {
-			reg = <0x140 0x10>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-pbclk";
-			clocks = <&SYSCLK>;
-			clock-output-names = "pb1_clk";
-			/* used by system modules, not gateable */
-			microchip,ignore-unused;
-		};
-
-		/* Peripheral bus2 clock */
-		PBCLK2:pb2_clk@150 {
-			reg = <0x150 0x10>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-pbclk";
-			clocks = <&SYSCLK>;
-			clock-output-names = "pb2_clk";
-			/* avoid gating even if unused */
-			microchip,ignore-unused;
-		};
-
-		/* Peripheral bus3 clock */
-		PBCLK3:pb3_clk@160 {
-			reg = <0x160 0x10>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-pbclk";
-			clocks = <&SYSCLK>;
-			clock-output-names = "pb3_clk";
-		};
-
-		/* Peripheral bus4 clock(I/O ports, GPIO) */
-		PBCLK4:pb4_clk@170 {
-			reg = <0x170 0x10>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-pbclk";
-			clocks = <&SYSCLK>;
-			clock-output-names = "pb4_clk";
-		};
-
-		/* Peripheral bus clock */
-		PBCLK5:pb5_clk@180 {
-			reg = <0x180 0x10>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-pbclk";
-			clocks = <&SYSCLK>;
-			clock-output-names = "pb5_clk";
-		};
-
-		/* Peripheral Bus6 clock; */
-		PBCLK6:pb6_clk@190 {
-			reg = <0x190 0x10>;
-			compatible = "microchip,pic32mzda-pbclk";
-			clocks = <&SYSCLK>;
-			#clock-cells = <0>;
-		};
-
-		/* Peripheral bus7 clock */
-		PBCLK7:pb7_clk@1a0 {
-			reg = <0x1a0 0x10>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-pbclk";
-			/* CPU is driven by this clock; so named */
-			clock-output-names = "cpu_clk";
-			clocks = <&SYSCLK>;
-		};
-
-		/* Reference Oscillator clock for SPI/I2S */
-		REFCLKO1:refo1_clk@80 {
-			reg = <0x080 0x20>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-refoclk";
-			clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
-				 <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
-			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
-						  <5>, <7>, <8>, <9>;
-			clock-output-names = "refo1_clk";
-		};
-
-		/* Reference Oscillator clock for SQI */
-		REFCLKO2:refo2_clk@a0 {
-			reg = <0x0a0 0x20>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-refoclk";
-			clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
-				 <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
-			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
-						  <5>, <7>, <8>, <9>;
-			clock-output-names = "refo2_clk";
-		};
-
-		/* Reference Oscillator clock, ADC */
-		REFCLKO3:refo3_clk@c0 {
-			reg = <0x0c0 0x20>;
-			compatible = "microchip,pic32mzda-refoclk";
-			clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
-				 <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
-			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
-						  <5>, <7>, <8>, <9>;
-			#clock-cells = <0>;
-			clock-output-names = "refo3_clk";
-		};
-
-		/* Reference Oscillator clock */
-		REFCLKO4:refo4_clk@e0 {
-			reg = <0x0e0 0x20>;
-			compatible = "microchip,pic32mzda-refoclk";
-			clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
-				 <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
-			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
-						  <5>, <7>, <8>, <9>;
-			#clock-cells = <0>;
-			clock-output-names = "refo4_clk";
-		};
-
-		/* Reference Oscillator clock, LCD */
-		REFCLKO5:refo5_clk@100 {
-			reg = <0x100 0x20>;
-			compatible = "microchip,pic32mzda-refoclk";
-			clocks = <&SYSCLK>,<&PBCLK1>,<&POSC>,<&FRC>,<&LPRC>,
-				 <&SOSC>,<&SYSPLL>,<&REFIx>,<&BFRC>;
-			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
-						  <5>, <7>, <8>, <9>;
-			#clock-cells = <0>;
-			clock-output-names = "refo5_clk";
-		};
-	};
-};

arch/mips/boot/dts/pic32/pic32mzda.dtsi

@@ -6,11 +6,9 @@
  * published by the Free Software Foundation.
  *
  */
-
+#include <dt-bindings/clock/microchip,pic32-clock.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
-#include "pic32mzda-clk.dtsi"
-
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -50,6 +48,29 @@
 		interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 	};
 
+	/* external clock input on TxCLKI pin */
+	txcki: txcki_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <4000000>;
+		status = "disabled";
+	};
+
+	/* external input on REFCLKIx pin */
+	refix: refix_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		status = "disabled";
+	};
+
+	rootclk: clock-controller@1f801200 {
+		compatible = "microchip,pic32mzda-clk";
+		reg = <0x1f801200 0x200>;
+		#clock-cells = <1>;
+		microchip,pic32mzda-sosc;
+	};
+
 	evic: interrupt-controller@1f810000 {
 		compatible = "microchip,pic32mzda-evic";
 		interrupt-controller;
@@ -63,7 +84,7 @@
 		#size-cells = <1>;
 		compatible = "microchip,pic32mzda-pinctrl";
 		reg = <0x1f801400 0x400>;
-		clocks = <&PBCLK1>;
+		clocks = <&rootclk PB1CLK>;
 	};
 
 	/* PORTA */
@@ -75,7 +96,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <0>;
 		gpio-ranges = <&pic32_pinctrl 0 0 16>;
 	};
@@ -89,7 +110,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <1>;
 		gpio-ranges = <&pic32_pinctrl 0 16 16>;
 	};
@@ -103,7 +124,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <2>;
 		gpio-ranges = <&pic32_pinctrl 0 32 16>;
 	};
@@ -117,7 +138,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <3>;
 		gpio-ranges = <&pic32_pinctrl 0 48 16>;
 	};
@@ -131,7 +152,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <4>;
 		gpio-ranges = <&pic32_pinctrl 0 64 16>;
 	};
@@ -145,7 +166,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <5>;
 		gpio-ranges = <&pic32_pinctrl 0 80 16>;
 	};
@@ -159,7 +180,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <6>;
 		gpio-ranges = <&pic32_pinctrl 0 96 16>;
 	};
@@ -173,7 +194,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <7>;
 		gpio-ranges = <&pic32_pinctrl 0 112 16>;
 	};
@@ -189,7 +210,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <8>;
 		gpio-ranges = <&pic32_pinctrl 0 128 16>;
 	};
@@ -203,7 +224,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <9>;
 		gpio-ranges = <&pic32_pinctrl 0 144 16>;
 	};
@@ -212,7 +233,7 @@
 		compatible = "microchip,pic32mzda-sdhci";
 		reg = <0x1f8ec000 0x100>;
 		interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&REFCLKO4>, <&PBCLK5>;
+		clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>;
 		clock-names = "base_clk", "sys_clk";
 		bus-width = <4>;
 		cap-sd-highspeed;
@@ -225,7 +246,7 @@
 		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
 			<113 IRQ_TYPE_LEVEL_HIGH>,
 			<114 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		status = "disabled";
 	};
 
@@ -235,7 +256,7 @@
 		interrupts = <145 IRQ_TYPE_LEVEL_HIGH>,
 			<146 IRQ_TYPE_LEVEL_HIGH>,
 			<147 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		status = "disabled";
 	};
 
@@ -245,7 +266,7 @@
 		interrupts = <157 IRQ_TYPE_LEVEL_HIGH>,
 			<158 IRQ_TYPE_LEVEL_HIGH>,
 			<159 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		status = "disabled";
 	};
 
@@ -255,7 +276,7 @@
 		interrupts = <170 IRQ_TYPE_LEVEL_HIGH>,
 			<171 IRQ_TYPE_LEVEL_HIGH>,
 			<172 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		status = "disabled";
 	};
 
@@ -265,7 +286,7 @@
 		interrupts = <179 IRQ_TYPE_LEVEL_HIGH>,
 			<180 IRQ_TYPE_LEVEL_HIGH>,
 			<181 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		status = "disabled";
 	};
 
@@ -275,7 +296,7 @@
 		interrupts = <188 IRQ_TYPE_LEVEL_HIGH>,
 			<189 IRQ_TYPE_LEVEL_HIGH>,
 			<190 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		status = "disabled";
 	};
 };

arch/mips/boot/dts/pic32/pic32mzda_sk.dts

@@ -95,8 +95,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdhc1>;
 	status = "okay";
-	assigned-clocks = <&REFCLKO2>,<&REFCLKO4>,<&REFCLKO5>;
-	assigned-clock-rates = <50000000>,<25000000>,<40000000>;
+	assigned-clocks = <&rootclk REF2CLK>, <&rootclk REF4CLK>,
+		<&rootclk REF5CLK>;
+	assigned-clock-rates = <50000000>, <25000000>, <40000000>;
 };
 
 &pic32_pinctrl {

arch/mips/boot/dts/qca/Makefile

@@ -1,8 +1,9 @@
 # All DTBs
 dtb-$(CONFIG_ATH79)			+= ar9132_tl_wr1043nd_v1.dtb
-
-# Select a DTB to build in the kernel
-obj-$(CONFIG_DTB_TL_WR1043ND_V1)	+= ar9132_tl_wr1043nd_v1.dtb.o
+dtb-$(CONFIG_ATH79)			+= ar9331_dpt_module.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_dragino_ms14.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_omega.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_tl_mr3020.dtb
 
 # Force kbuild to make empty built-in.o if necessary
 obj-				+= dummy.o

arch/mips/boot/dts/qca/ar9132.dtsi

@@ -1,3 +1,5 @@
+#include <dt-bindings/clock/ath79-clk.h>
+
 / {
 	compatible = "qca,ar9132";
 
@@ -11,6 +13,7 @@
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "mips,mips24Kc";
+			clocks = <&pll ATH79_CLK_CPU>;
 			reg = <0>;
 		};
 	};
@@ -52,12 +55,12 @@
 				#qca,ddr-wb-channel-cells = <1>;
 			};
 
-			uart@18020000 {
+			uart: uart@18020000 {
 				compatible = "ns8250";
 				reg = <0x18020000 0x20>;
 				interrupts = <3>;
 
-				clocks = <&pll 2>;
+				clocks = <&pll ATH79_CLK_AHB>;
 				clock-names = "uart";
 
 				reg-io-width = <4>;
@@ -94,13 +97,13 @@
 				clock-output-names = "cpu", "ddr", "ahb";
 			};
 
-			wdt@18060008 {
+			wdt: wdt@18060008 {
 				compatible = "qca,ar7130-wdt";
 				reg = <0x18060008 0x8>;
 
 				interrupts = <4>;
 
-				clocks = <&pll 2>;
+				clocks = <&pll ATH79_CLK_AHB>;
 				clock-names = "wdt";
 			};
 
@@ -125,7 +128,7 @@
 			};
 		};
 
-		usb@1b000100 {
+		usb: usb@1b000100 {
 			compatible = "qca,ar7100-ehci", "generic-ehci";
 			reg = <0x1b000100 0x100>;
 
@@ -140,11 +143,11 @@
 			status = "disabled";
 		};
 
-		spi@1f000000 {
+		spi: spi@1f000000 {
 			compatible = "qca,ar9132-spi", "qca,ar7100-spi";
 			reg = <0x1f000000 0x10>;
 
-			clocks = <&pll 2>;
+			clocks = <&pll ATH79_CLK_AHB>;
 			clock-names = "ahb";
 
 			status = "disabled";

arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts

@@ -9,10 +9,6 @@
 	compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
 	model = "TP-Link TL-WR1043ND Version 1";
 
-	alias {
-		serial0 = "/ahb/apb/uart@18020000";
-	};
-
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x2000000>;
@@ -24,55 +20,6 @@
 		clock-frequency = <40000000>;
 	};
 
-	ahb {
-		apb {
-			uart@18020000 {
-				status = "okay";
-			};
-
-			pll-controller@18050000 {
-				clocks = <&extosc>;
-			};
-		};
-
-		usb@1b000100 {
-			status = "okay";
-		};
-
-		spi@1f000000 {
-			status = "okay";
-			num-cs = <1>;
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "s25sl064a";
-				reg = <0>;
-				spi-max-frequency = <25000000>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x000000 0x020000>;
-				};
-
-				partition@1 {
-					label = "firmware";
-					reg = <0x020000 0x7D0000>;
-				};
-
-				partition@2 {
-					label = "art";
-					reg = <0x7F0000 0x010000>;
-					read-only;
-				};
-			};
-		};
-	};
-
-	usb-phy {
-		status = "okay";
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -118,3 +65,48 @@
 		};
 	};
 };
+
+&uart {
+	status = "okay";
+};
+
+&pll {
+	clocks = <&extosc>;
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+	num-cs = <1>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "s25sl064a";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x000000 0x020000>;
+		};
+
+		partition@1 {
+			label = "firmware";
+			reg = <0x020000 0x7D0000>;
+		};
+
+		partition@2 {
+			label = "art";
+			reg = <0x7F0000 0x010000>;
+			read-only;
+		};
+	};
+};

arch/mips/boot/dts/qca/ar9331.dtsi

@@ -0,0 +1,155 @@
+#include <dt-bindings/clock/ath79-clk.h>
+
+/ {
+	compatible = "qca,ar9331";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips24Kc";
+			clocks = <&pll ATH79_CLK_CPU>;
+			reg = <0>;
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "qca,ar7100-cpu-intc";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		qca,ddr-wb-channel-interrupts = <2>, <3>;
+		qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
+	};
+
+	ref: ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+
+		apb {
+			compatible = "simple-bus";
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			interrupt-parent = <&miscintc>;
+
+			ddr_ctrl: memory-controller@18000000 {
+				compatible = "qca,ar7240-ddr-controller";
+				reg = <0x18000000 0x100>;
+
+				#qca,ddr-wb-channel-cells = <1>;
+			};
+
+			uart: uart@18020000 {
+				compatible = "qca,ar9330-uart";
+				reg = <0x18020000 0x14>;
+
+				interrupts = <3>;
+
+				clocks = <&ref>;
+				clock-names = "uart";
+
+				status = "disabled";
+			};
+
+			gpio: gpio@18040000 {
+				compatible = "qca,ar7100-gpio";
+				reg = <0x18040000 0x34>;
+				interrupts = <2>;
+
+				ngpios = <30>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				status = "disabled";
+			};
+
+			pll: pll-controller@18050000 {
+				compatible = "qca,ar9330-pll";
+				reg = <0x18050000 0x100>;
+
+				clocks = <&ref>;
+				clock-names = "ref";
+
+				#clock-cells = <1>;
+			};
+
+			miscintc: interrupt-controller@18060010 {
+				compatible = "qca,ar7240-misc-intc";
+				reg = <0x18060010 0x4>;
+
+				interrupt-parent = <&cpuintc>;
+				interrupts = <6>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			rst: reset-controller@1806001c {
+				compatible = "qca,ar7100-reset";
+				reg = <0x1806001c 0x4>;
+
+				#reset-cells = <1>;
+			};
+		};
+
+		usb: usb@1b000100 {
+			compatible = "chipidea,usb2";
+			reg = <0x1b000000 0x200>;
+
+			interrupts = <3>;
+			resets = <&rst 5>;
+
+			phy-names = "usb-phy";
+			phys = <&usb_phy>;
+
+			status = "disabled";
+		};
+
+		spi: spi@1f000000 {
+			compatible = "qca,ar7100-spi";
+			reg = <0x1f000000 0x10>;
+
+			clocks = <&pll ATH79_CLK_AHB>;
+			clock-names = "ahb";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+
+	usb_phy: usb-phy {
+		compatible = "qca,ar7100-usb-phy";
+
+		reset-names = "usb-phy", "usb-suspend-override";
+		resets = <&rst 4>, <&rst 3>;
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+};

arch/mips/boot/dts/qca/ar9331_dpt_module.dts

@@ -0,0 +1,78 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "DPTechnics DPT-Module";
+	compatible = "dptechnics,dpt-module";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "dpt-module:green:system";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128FVSG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};

arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts

@@ -0,0 +1,102 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "Dragino MS14 (Dragino 2)";
+	compatible = "dragino,ms14";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "dragino2:red:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		lan {
+			label = "dragino2:red:lan";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wan {
+			label = "dragino2:red:wan";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		system {
+			label = "dragino2:red:system";
+			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "jumpstart";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128BVFG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};

arch/mips/boot/dts/qca/ar9331_omega.dts

@@ -0,0 +1,78 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "Onion Omega";
+	compatible = "onion,omega";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "onion:amber:system";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128FVSG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};

arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts

@@ -0,0 +1,118 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "TP-Link TL-MR3020";
+	compatible = "tplink,tl-mr3020";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "tp-link:green:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		lan {
+			label = "tp-link:green:lan";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wps {
+			label = "tp-link:green:wps";
+			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3g {
+			label = "tp-link:green:3g";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		button@1 {
+			label = "sw1";
+			linux,code = <BTN_0>;
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		button@2 {
+			label = "sw2";
+			linux,code = <BTN_1>;
+			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_vbus: reg_usb_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Spansion S25FL032PIF SPI flash */
+	spiflash: s25sl032p@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25sl032p", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};

arch/mips/boot/tools/.gitignore

@@ -0,0 +1 @@
+relocs

arch/mips/boot/tools/Makefile

@@ -0,0 +1,8 @@
+
+hostprogs-y	+= relocs
+relocs-objs	+= relocs_32.o
+relocs-objs	+= relocs_64.o
+relocs-objs	+= relocs_main.o
+PHONY += relocs
+relocs: $(obj)/relocs
+	@:

arch/mips/boot/tools/relocs.c

@@ -0,0 +1,680 @@
+/* This is included from relocs_32/64.c */
+
+#define ElfW(type)		_ElfW(ELF_BITS, type)
+#define _ElfW(bits, type)	__ElfW(bits, type)
+#define __ElfW(bits, type)	Elf##bits##_##type
+
+#define Elf_Addr		ElfW(Addr)
+#define Elf_Ehdr		ElfW(Ehdr)
+#define Elf_Phdr		ElfW(Phdr)
+#define Elf_Shdr		ElfW(Shdr)
+#define Elf_Sym			ElfW(Sym)
+
+static Elf_Ehdr ehdr;
+
+struct relocs {
+	uint32_t	*offset;
+	unsigned long	count;
+	unsigned long	size;
+};
+
+static struct relocs relocs;
+
+struct section {
+	Elf_Shdr       shdr;
+	struct section *link;
+	Elf_Sym        *symtab;
+	Elf_Rel        *reltab;
+	char           *strtab;
+	long           shdr_offset;
+};
+static struct section *secs;
+
+static const char * const regex_sym_kernel = {
+/* Symbols matching these regex's should never be relocated */
+	"^(__crc_)",
+};
+
+static regex_t sym_regex_c;
+
+static int regex_skip_reloc(const char *sym_name)
+{
+	return !regexec(&sym_regex_c, sym_name, 0, NULL, 0);
+}
+
+static void regex_init(void)
+{
+	char errbuf[128];
+	int err;
+
+	err = regcomp(&sym_regex_c, regex_sym_kernel,
+			REG_EXTENDED|REG_NOSUB);
+
+	if (err) {
+		regerror(err, &sym_regex_c, errbuf, sizeof(errbuf));
+		die("%s", errbuf);
+	}
+}
+
+static const char *rel_type(unsigned type)
+{
+	static const char * const type_name[] = {
+#define REL_TYPE(X)[X] = #X
+		REL_TYPE(R_MIPS_NONE),
+		REL_TYPE(R_MIPS_16),
+		REL_TYPE(R_MIPS_32),
+		REL_TYPE(R_MIPS_REL32),
+		REL_TYPE(R_MIPS_26),
+		REL_TYPE(R_MIPS_HI16),
+		REL_TYPE(R_MIPS_LO16),
+		REL_TYPE(R_MIPS_GPREL16),
+		REL_TYPE(R_MIPS_LITERAL),
+		REL_TYPE(R_MIPS_GOT16),
+		REL_TYPE(R_MIPS_PC16),
+		REL_TYPE(R_MIPS_CALL16),
+		REL_TYPE(R_MIPS_GPREL32),
+		REL_TYPE(R_MIPS_64),
+		REL_TYPE(R_MIPS_HIGHER),
+		REL_TYPE(R_MIPS_HIGHEST),
+		REL_TYPE(R_MIPS_PC21_S2),
+		REL_TYPE(R_MIPS_PC26_S2),
+#undef REL_TYPE
+	};
+	const char *name = "unknown type rel type name";
+
+	if (type < ARRAY_SIZE(type_name) && type_name[type])
+		name = type_name[type];
+	return name;
+}
+
+static const char *sec_name(unsigned shndx)
+{
+	const char *sec_strtab;
+	const char *name;
+
+	sec_strtab = secs[ehdr.e_shstrndx].strtab;
+	if (shndx < ehdr.e_shnum)
+		name = sec_strtab + secs[shndx].shdr.sh_name;
+	else if (shndx == SHN_ABS)
+		name = "ABSOLUTE";
+	else if (shndx == SHN_COMMON)
+		name = "COMMON";
+	else
+		name = "<noname>";
+	return name;
+}
+
+static struct section *sec_lookup(const char *secname)
+{
+	int i;
+
+	for (i = 0; i < ehdr.e_shnum; i++)
+		if (strcmp(secname, sec_name(i)) == 0)
+			return &secs[i];
+
+	return NULL;
+}
+
+static const char *sym_name(const char *sym_strtab, Elf_Sym *sym)
+{
+	const char *name;
+
+	if (sym->st_name)
+		name = sym_strtab + sym->st_name;
+	else
+		name = sec_name(sym->st_shndx);
+	return name;
+}
+
+#if BYTE_ORDER == LITTLE_ENDIAN
+#define le16_to_cpu(val) (val)
+#define le32_to_cpu(val) (val)
+#define le64_to_cpu(val) (val)
+#define be16_to_cpu(val) bswap_16(val)
+#define be32_to_cpu(val) bswap_32(val)
+#define be64_to_cpu(val) bswap_64(val)
+
+#define cpu_to_le16(val) (val)
+#define cpu_to_le32(val) (val)
+#define cpu_to_le64(val) (val)
+#define cpu_to_be16(val) bswap_16(val)
+#define cpu_to_be32(val) bswap_32(val)
+#define cpu_to_be64(val) bswap_64(val)
+#endif
+#if BYTE_ORDER == BIG_ENDIAN
+#define le16_to_cpu(val) bswap_16(val)
+#define le32_to_cpu(val) bswap_32(val)
+#define le64_to_cpu(val) bswap_64(val)
+#define be16_to_cpu(val) (val)
+#define be32_to_cpu(val) (val)
+#define be64_to_cpu(val) (val)
+
+#define cpu_to_le16(val) bswap_16(val)
+#define cpu_to_le32(val) bswap_32(val)
+#define cpu_to_le64(val) bswap_64(val)
+#define cpu_to_be16(val) (val)
+#define cpu_to_be32(val) (val)
+#define cpu_to_be64(val) (val)
+#endif
+
+static uint16_t elf16_to_cpu(uint16_t val)
+{
+	if (ehdr.e_ident[EI_DATA] == ELFDATA2LSB)
+		return le16_to_cpu(val);
+	else
+		return be16_to_cpu(val);
+}
+
+static uint32_t elf32_to_cpu(uint32_t val)
+{
+	if (ehdr.e_ident[EI_DATA] == ELFDATA2LSB)
+		return le32_to_cpu(val);
+	else
+		return be32_to_cpu(val);
+}
+
+static uint32_t cpu_to_elf32(uint32_t val)
+{
+	if (ehdr.e_ident[EI_DATA] == ELFDATA2LSB)
+		return cpu_to_le32(val);
+	else
+		return cpu_to_be32(val);
+}
+
+#define elf_half_to_cpu(x)	elf16_to_cpu(x)
+#define elf_word_to_cpu(x)	elf32_to_cpu(x)
+
+#if ELF_BITS == 64
+static uint64_t elf64_to_cpu(uint64_t val)
+{
+	if (ehdr.e_ident[EI_DATA] == ELFDATA2LSB)
+		return le64_to_cpu(val);
+	else
+		return be64_to_cpu(val);
+}
+#define elf_addr_to_cpu(x)	elf64_to_cpu(x)
+#define elf_off_to_cpu(x)	elf64_to_cpu(x)
+#define elf_xword_to_cpu(x)	elf64_to_cpu(x)
+#else
+#define elf_addr_to_cpu(x)	elf32_to_cpu(x)
+#define elf_off_to_cpu(x)	elf32_to_cpu(x)
+#define elf_xword_to_cpu(x)	elf32_to_cpu(x)
+#endif
+
+static void read_ehdr(FILE *fp)
+{
+	if (fread(&ehdr, sizeof(ehdr), 1, fp) != 1)
+		die("Cannot read ELF header: %s\n", strerror(errno));
+
+	if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0)
+		die("No ELF magic\n");
+
+	if (ehdr.e_ident[EI_CLASS] != ELF_CLASS)
+		die("Not a %d bit executable\n", ELF_BITS);
+
+	if ((ehdr.e_ident[EI_DATA] != ELFDATA2LSB) &&
+	    (ehdr.e_ident[EI_DATA] != ELFDATA2MSB))
+		die("Unknown ELF Endianness\n");
+
+	if (ehdr.e_ident[EI_VERSION] != EV_CURRENT)
+		die("Unknown ELF version\n");
+
+	/* Convert the fields to native endian */
+	ehdr.e_type      = elf_half_to_cpu(ehdr.e_type);
+	ehdr.e_machine   = elf_half_to_cpu(ehdr.e_machine);
+	ehdr.e_version   = elf_word_to_cpu(ehdr.e_version);
+	ehdr.e_entry     = elf_addr_to_cpu(ehdr.e_entry);
+	ehdr.e_phoff     = elf_off_to_cpu(ehdr.e_phoff);
+	ehdr.e_shoff     = elf_off_to_cpu(ehdr.e_shoff);
+	ehdr.e_flags     = elf_word_to_cpu(ehdr.e_flags);
+	ehdr.e_ehsize    = elf_half_to_cpu(ehdr.e_ehsize);
+	ehdr.e_phentsize = elf_half_to_cpu(ehdr.e_phentsize);
+	ehdr.e_phnum     = elf_half_to_cpu(ehdr.e_phnum);
+	ehdr.e_shentsize = elf_half_to_cpu(ehdr.e_shentsize);
+	ehdr.e_shnum     = elf_half_to_cpu(ehdr.e_shnum);
+	ehdr.e_shstrndx  = elf_half_to_cpu(ehdr.e_shstrndx);
+
+	if ((ehdr.e_type != ET_EXEC) && (ehdr.e_type != ET_DYN))
+		die("Unsupported ELF header type\n");
+
+	if (ehdr.e_machine != ELF_MACHINE)
+		die("Not for %s\n", ELF_MACHINE_NAME);
+
+	if (ehdr.e_version != EV_CURRENT)
+		die("Unknown ELF version\n");
+
+	if (ehdr.e_ehsize != sizeof(Elf_Ehdr))
+		die("Bad Elf header size\n");
+
+	if (ehdr.e_phentsize != sizeof(Elf_Phdr))
+		die("Bad program header entry\n");
+
+	if (ehdr.e_shentsize != sizeof(Elf_Shdr))
+		die("Bad section header entry\n");
+
+	if (ehdr.e_shstrndx >= ehdr.e_shnum)
+		die("String table index out of bounds\n");
+}
+
+static void read_shdrs(FILE *fp)
+{
+	int i;
+	Elf_Shdr shdr;
+
+	secs = calloc(ehdr.e_shnum, sizeof(struct section));
+	if (!secs)
+		die("Unable to allocate %d section headers\n", ehdr.e_shnum);
+
+	if (fseek(fp, ehdr.e_shoff, SEEK_SET) < 0)
+		die("Seek to %d failed: %s\n", ehdr.e_shoff, strerror(errno));
+
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+
+		sec->shdr_offset = ftell(fp);
+		if (fread(&shdr, sizeof(shdr), 1, fp) != 1)
+			die("Cannot read ELF section headers %d/%d: %s\n",
+			    i, ehdr.e_shnum, strerror(errno));
+		sec->shdr.sh_name      = elf_word_to_cpu(shdr.sh_name);
+		sec->shdr.sh_type      = elf_word_to_cpu(shdr.sh_type);
+		sec->shdr.sh_flags     = elf_xword_to_cpu(shdr.sh_flags);
+		sec->shdr.sh_addr      = elf_addr_to_cpu(shdr.sh_addr);
+		sec->shdr.sh_offset    = elf_off_to_cpu(shdr.sh_offset);
+		sec->shdr.sh_size      = elf_xword_to_cpu(shdr.sh_size);
+		sec->shdr.sh_link      = elf_word_to_cpu(shdr.sh_link);
+		sec->shdr.sh_info      = elf_word_to_cpu(shdr.sh_info);
+		sec->shdr.sh_addralign = elf_xword_to_cpu(shdr.sh_addralign);
+		sec->shdr.sh_entsize   = elf_xword_to_cpu(shdr.sh_entsize);
+		if (sec->shdr.sh_link < ehdr.e_shnum)
+			sec->link = &secs[sec->shdr.sh_link];
+	}
+}
+
+static void read_strtabs(FILE *fp)
+{
+	int i;
+
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+
+		if (sec->shdr.sh_type != SHT_STRTAB)
+			continue;
+
+		sec->strtab = malloc(sec->shdr.sh_size);
+		if (!sec->strtab)
+			die("malloc of %d bytes for strtab failed\n",
+			    sec->shdr.sh_size);
+
+		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0)
+			die("Seek to %d failed: %s\n",
+			    sec->shdr.sh_offset, strerror(errno));
+
+		if (fread(sec->strtab, 1, sec->shdr.sh_size, fp) !=
+		    sec->shdr.sh_size)
+			die("Cannot read symbol table: %s\n", strerror(errno));
+	}
+}
+
+static void read_symtabs(FILE *fp)
+{
+	int i, j;
+
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+		if (sec->shdr.sh_type != SHT_SYMTAB)
+			continue;
+
+		sec->symtab = malloc(sec->shdr.sh_size);
+		if (!sec->symtab)
+			die("malloc of %d bytes for symtab failed\n",
+			    sec->shdr.sh_size);
+
+		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0)
+			die("Seek to %d failed: %s\n",
+			    sec->shdr.sh_offset, strerror(errno));
+
+		if (fread(sec->symtab, 1, sec->shdr.sh_size, fp) !=
+		    sec->shdr.sh_size)
+			die("Cannot read symbol table: %s\n", strerror(errno));
+
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Sym); j++) {
+			Elf_Sym *sym = &sec->symtab[j];
+
+			sym->st_name  = elf_word_to_cpu(sym->st_name);
+			sym->st_value = elf_addr_to_cpu(sym->st_value);
+			sym->st_size  = elf_xword_to_cpu(sym->st_size);
+			sym->st_shndx = elf_half_to_cpu(sym->st_shndx);
+		}
+	}
+}
+
+static void read_relocs(FILE *fp)
+{
+	static unsigned long base = 0;
+	int i, j;
+
+	if (!base) {
+		struct section *sec = sec_lookup(".text");
+
+		if (!sec)
+			die("Could not find .text section\n");
+
+		base = sec->shdr.sh_addr;
+	}
+
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+
+		if (sec->shdr.sh_type != SHT_REL_TYPE)
+			continue;
+
+		sec->reltab = malloc(sec->shdr.sh_size);
+		if (!sec->reltab)
+			die("malloc of %d bytes for relocs failed\n",
+			    sec->shdr.sh_size);
+
+		if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0)
+			die("Seek to %d failed: %s\n",
+			    sec->shdr.sh_offset, strerror(errno));
+
+		if (fread(sec->reltab, 1, sec->shdr.sh_size, fp) !=
+		    sec->shdr.sh_size)
+			die("Cannot read symbol table: %s\n", strerror(errno));
+
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Rel); j++) {
+			Elf_Rel *rel = &sec->reltab[j];
+
+			rel->r_offset = elf_addr_to_cpu(rel->r_offset);
+			/* Set offset into kernel image */
+			rel->r_offset -= base;
+#if (ELF_BITS == 32)
+			rel->r_info   = elf_xword_to_cpu(rel->r_info);
+#else
+			/* Convert MIPS64 RELA format - only the symbol
+			 * index needs converting to native endianness
+			 */
+			rel->r_info   = rel->r_info;
+			ELF_R_SYM(rel->r_info) = elf32_to_cpu(ELF_R_SYM(rel->r_info));
+#endif
+#if (SHT_REL_TYPE == SHT_RELA)
+			rel->r_addend = elf_xword_to_cpu(rel->r_addend);
+#endif
+		}
+	}
+}
+
+static void remove_relocs(FILE *fp)
+{
+	int i;
+	Elf_Shdr shdr;
+
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		struct section *sec = &secs[i];
+
+		if (sec->shdr.sh_type != SHT_REL_TYPE)
+			continue;
+
+		if (fseek(fp, sec->shdr_offset, SEEK_SET) < 0)
+			die("Seek to %d failed: %s\n",
+			    sec->shdr_offset, strerror(errno));
+
+		if (fread(&shdr, sizeof(shdr), 1, fp) != 1)
+			die("Cannot read ELF section headers %d/%d: %s\n",
+			    i, ehdr.e_shnum, strerror(errno));
+
+		/* Set relocation section size to 0, effectively removing it.
+		 * This is necessary due to lack of support for relocations
+		 * in objcopy when creating 32bit elf from 64bit elf.
+		 */
+		shdr.sh_size = 0;
+
+		if (fseek(fp, sec->shdr_offset, SEEK_SET) < 0)
+			die("Seek to %d failed: %s\n",
+			    sec->shdr_offset, strerror(errno));
+
+		if (fwrite(&shdr, sizeof(shdr), 1, fp) != 1)
+			die("Cannot write ELF section headers %d/%d: %s\n",
+			    i, ehdr.e_shnum, strerror(errno));
+	}
+}
+
+static void add_reloc(struct relocs *r, uint32_t offset, unsigned type)
+{
+	/* Relocation representation in binary table:
+	 * |76543210|76543210|76543210|76543210|
+	 * |  Type  |  offset from _text >> 2  |
+	 */
+	offset >>= 2;
+	if (offset > 0x00FFFFFF)
+		die("Kernel image exceeds maximum size for relocation!\n");
+
+	offset = (offset & 0x00FFFFFF) | ((type & 0xFF) << 24);
+
+	if (r->count == r->size) {
+		unsigned long newsize = r->size + 50000;
+		void *mem = realloc(r->offset, newsize * sizeof(r->offset[0]));
+
+		if (!mem)
+			die("realloc failed\n");
+
+		r->offset = mem;
+		r->size = newsize;
+	}
+	r->offset[r->count++] = offset;
+}
+
+static void walk_relocs(int (*process)(struct section *sec, Elf_Rel *rel,
+			Elf_Sym *sym, const char *symname))
+{
+	int i;
+
+	/* Walk through the relocations */
+	for (i = 0; i < ehdr.e_shnum; i++) {
+		char *sym_strtab;
+		Elf_Sym *sh_symtab;
+		struct section *sec_applies, *sec_symtab;
+		int j;
+		struct section *sec = &secs[i];
+
+		if (sec->shdr.sh_type != SHT_REL_TYPE)
+			continue;
+
+		sec_symtab  = sec->link;
+		sec_applies = &secs[sec->shdr.sh_info];
+		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC))
+			continue;
+
+		sh_symtab = sec_symtab->symtab;
+		sym_strtab = sec_symtab->link->strtab;
+		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Rel); j++) {
+			Elf_Rel *rel = &sec->reltab[j];
+			Elf_Sym *sym = &sh_symtab[ELF_R_SYM(rel->r_info)];
+			const char *symname = sym_name(sym_strtab, sym);
+
+			process(sec, rel, sym, symname);
+		}
+	}
+}
+
+static int do_reloc(struct section *sec, Elf_Rel *rel, Elf_Sym *sym,
+		      const char *symname)
+{
+	unsigned r_type = ELF_R_TYPE(rel->r_info);
+	unsigned bind = ELF_ST_BIND(sym->st_info);
+
+	if ((bind == STB_WEAK) && (sym->st_value == 0)) {
+		/* Don't relocate weak symbols without a target */
+		return 0;
+	}
+
+	if (regex_skip_reloc(symname))
+		return 0;
+
+	switch (r_type) {
+	case R_MIPS_NONE:
+	case R_MIPS_REL32:
+	case R_MIPS_PC16:
+	case R_MIPS_PC21_S2:
+	case R_MIPS_PC26_S2:
+		/*
+		 * NONE can be ignored and PC relative relocations don't
+		 * need to be adjusted.
+		 */
+	case R_MIPS_HIGHEST:
+	case R_MIPS_HIGHER:
+		/* We support relocating within the same 4Gb segment only,
+		 * thus leaving the top 32bits unchanged
+		 */
+	case R_MIPS_LO16:
+		/* We support relocating by 64k jumps only
+		 * thus leaving the bottom 16bits unchanged
+		 */
+		break;
+
+	case R_MIPS_64:
+	case R_MIPS_32:
+	case R_MIPS_26:
+	case R_MIPS_HI16:
+		add_reloc(&relocs, rel->r_offset, r_type);
+		break;
+
+	default:
+		die("Unsupported relocation type: %s (%d)\n",
+		    rel_type(r_type), r_type);
+		break;
+	}
+
+	return 0;
+}
+
+static int write_reloc_as_bin(uint32_t v, FILE *f)
+{
+	unsigned char buf[4];
+
+	v = cpu_to_elf32(v);
+
+	memcpy(buf, &v, sizeof(uint32_t));
+	return fwrite(buf, 1, 4, f);
+}
+
+static int write_reloc_as_text(uint32_t v, FILE *f)
+{
+	int res;
+
+	res = fprintf(f, "\t.long 0x%08"PRIx32"\n", v);
+	if (res < 0)
+		return res;
+	else
+		return sizeof(uint32_t);
+}
+
+static void emit_relocs(int as_text, int as_bin, FILE *outf)
+{
+	int i;
+	int (*write_reloc)(uint32_t, FILE *) = write_reloc_as_bin;
+	int size = 0;
+	int size_reserved;
+	struct section *sec_reloc;
+
+	sec_reloc = sec_lookup(".data.reloc");
+	if (!sec_reloc)
+		die("Could not find relocation section\n");
+
+	size_reserved = sec_reloc->shdr.sh_size;
+
+	/* Collect up the relocations */
+	walk_relocs(do_reloc);
+
+	/* Print the relocations */
+	if (as_text) {
+		/* Print the relocations in a form suitable that
+		 * gas will like.
+		 */
+		printf(".section \".data.reloc\",\"a\"\n");
+		printf(".balign 4\n");
+		/* Output text to stdout */
+		write_reloc = write_reloc_as_text;
+		outf = stdout;
+	} else if (as_bin) {
+		/* Output raw binary to stdout */
+		outf = stdout;
+	} else {
+		/* Seek to offset of the relocation section.
+		* Each relocation is then written into the
+		* vmlinux kernel image.
+		*/
+		if (fseek(outf, sec_reloc->shdr.sh_offset, SEEK_SET) < 0) {
+			die("Seek to %d failed: %s\n",
+				sec_reloc->shdr.sh_offset, strerror(errno));
+		}
+	}
+
+	for (i = 0; i < relocs.count; i++)
+		size += write_reloc(relocs.offset[i], outf);
+
+	/* Print a stop, but only if we've actually written some relocs */
+	if (size)
+		size += write_reloc(0, outf);
+
+	if (size > size_reserved)
+		/* Die, but suggest a value for CONFIG_RELOCATION_TABLE_SIZE
+		 * which will fix this problem and allow a bit of headroom
+		 * if more kernel features are enabled
+		 */
+		die("Relocations overflow available space!\n" \
+		    "Please adjust CONFIG_RELOCATION_TABLE_SIZE " \
+		    "to at least 0x%08x\n", (size + 0x1000) & ~0xFFF);
+}
+
+/*
+ * As an aid to debugging problems with different linkers
+ * print summary information about the relocs.
+ * Since different linkers tend to emit the sections in
+ * different orders we use the section names in the output.
+ */
+static int do_reloc_info(struct section *sec, Elf_Rel *rel, ElfW(Sym) *sym,
+				const char *symname)
+{
+	printf("%16s  0x%08x  %16s  %40s  %16s\n",
+		sec_name(sec->shdr.sh_info),
+		(unsigned int)rel->r_offset,
+		rel_type(ELF_R_TYPE(rel->r_info)),
+		symname,
+		sec_name(sym->st_shndx));
+	return 0;
+}
+
+static void print_reloc_info(void)
+{
+	printf("%16s  %10s  %16s  %40s  %16s\n",
+		"reloc section",
+		"offset",
+		"reloc type",
+		"symbol",
+		"symbol section");
+	walk_relocs(do_reloc_info);
+}
+
+#if ELF_BITS == 64
+# define process process_64
+#else
+# define process process_32
+#endif
+
+void process(FILE *fp, int as_text, int as_bin,
+	     int show_reloc_info, int keep_relocs)
+{
+	regex_init();
+	read_ehdr(fp);
+	read_shdrs(fp);
+	read_strtabs(fp);
+	read_symtabs(fp);
+	read_relocs(fp);
+	if (show_reloc_info) {
+		print_reloc_info();
+		return;
+	}
+	emit_relocs(as_text, as_bin, fp);
+	if (!keep_relocs)
+		remove_relocs(fp);
+}

arch/mips/boot/tools/relocs.h

@@ -0,0 +1,45 @@
+#ifndef RELOCS_H
+#define RELOCS_H
+
+#include <stdio.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <elf.h>
+#include <byteswap.h>
+#define USE_BSD
+#include <endian.h>
+#include <regex.h>
+
+void die(char *fmt, ...);
+
+/*
+ * Introduced for MIPSr6
+ */
+#ifndef R_MIPS_PC21_S2
+#define R_MIPS_PC21_S2		60
+#endif
+
+#ifndef R_MIPS_PC26_S2
+#define R_MIPS_PC26_S2		61
+#endif
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+enum symtype {
+	S_ABS,
+	S_REL,
+	S_SEG,
+	S_LIN,
+	S_NSYMTYPES
+};
+
+void process_32(FILE *fp, int as_text, int as_bin,
+		int show_reloc_info, int keep_relocs);
+void process_64(FILE *fp, int as_text, int as_bin,
+		int show_reloc_info, int keep_relocs);
+#endif /* RELOCS_H */

arch/mips/boot/tools/relocs_32.c

@@ -0,0 +1,17 @@
+#include "relocs.h"
+
+#define ELF_BITS 32
+
+#define ELF_MACHINE		EM_MIPS
+#define ELF_MACHINE_NAME	"MIPS"
+#define SHT_REL_TYPE		SHT_REL
+#define Elf_Rel			ElfW(Rel)
+
+#define ELF_CLASS		ELFCLASS32
+#define ELF_R_SYM(val)		ELF32_R_SYM(val)
+#define ELF_R_TYPE(val)		ELF32_R_TYPE(val)
+#define ELF_ST_TYPE(o)		ELF32_ST_TYPE(o)
+#define ELF_ST_BIND(o)		ELF32_ST_BIND(o)
+#define ELF_ST_VISIBILITY(o)	ELF32_ST_VISIBILITY(o)
+
+#include "relocs.c"

arch/mips/boot/tools/relocs_64.c

@@ -0,0 +1,27 @@
+#include "relocs.h"
+
+#define ELF_BITS 64
+
+#define ELF_MACHINE             EM_MIPS
+#define ELF_MACHINE_NAME        "MIPS64"
+#define SHT_REL_TYPE            SHT_RELA
+#define Elf_Rel                 Elf64_Rela
+
+typedef uint8_t Elf64_Byte;
+
+typedef struct {
+	Elf64_Word r_sym;	/* Symbol index.  */
+	Elf64_Byte r_ssym;	/* Special symbol.  */
+	Elf64_Byte r_type3;	/* Third relocation.  */
+	Elf64_Byte r_type2;	/* Second relocation.  */
+	Elf64_Byte r_type;	/* First relocation.  */
+} Elf64_Mips_Rela;
+
+#define ELF_CLASS               ELFCLASS64
+#define ELF_R_SYM(val)          (((Elf64_Mips_Rela *)(&val))->r_sym)
+#define ELF_R_TYPE(val)         (((Elf64_Mips_Rela *)(&val))->r_type)
+#define ELF_ST_TYPE(o)          ELF64_ST_TYPE(o)
+#define ELF_ST_BIND(o)          ELF64_ST_BIND(o)
+#define ELF_ST_VISIBILITY(o)    ELF64_ST_VISIBILITY(o)
+
+#include "relocs.c"

arch/mips/boot/tools/relocs_main.c

@@ -0,0 +1,84 @@
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <endian.h>
+#include <elf.h>
+
+#include "relocs.h"
+
+void die(char *fmt, ...)
+{
+	va_list ap;
+
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	va_end(ap);
+	exit(1);
+}
+
+static void usage(void)
+{
+	die("relocs [--reloc-info|--text|--bin|--keep] vmlinux\n");
+}
+
+int main(int argc, char **argv)
+{
+	int show_reloc_info, as_text, as_bin, keep_relocs;
+	const char *fname;
+	FILE *fp;
+	int i;
+	unsigned char e_ident[EI_NIDENT];
+
+	show_reloc_info = 0;
+	as_text = 0;
+	as_bin = 0;
+	keep_relocs = 0;
+	fname = NULL;
+	for (i = 1; i < argc; i++) {
+		char *arg = argv[i];
+
+		if (*arg == '-') {
+			if (strcmp(arg, "--reloc-info") == 0) {
+				show_reloc_info = 1;
+				continue;
+			}
+			if (strcmp(arg, "--text") == 0) {
+				as_text = 1;
+				continue;
+			}
+			if (strcmp(arg, "--bin") == 0) {
+				as_bin = 1;
+				continue;
+			}
+			if (strcmp(arg, "--keep") == 0) {
+				keep_relocs = 1;
+				continue;
+			}
+		} else if (!fname) {
+			fname = arg;
+			continue;
+		}
+		usage();
+	}
+	if (!fname)
+		usage();
+
+	fp = fopen(fname, "r+");
+	if (!fp)
+		die("Cannot open %s: %s\n", fname, strerror(errno));
+
+	if (fread(&e_ident, 1, EI_NIDENT, fp) != EI_NIDENT)
+		die("Cannot read %s: %s", fname, strerror(errno));
+
+	rewind(fp);
+	if (e_ident[EI_CLASS] == ELFCLASS64)
+		process_64(fp, as_text,  as_bin, show_reloc_info, keep_relocs);
+	else
+		process_32(fp, as_text, as_bin, show_reloc_info, keep_relocs);
+	fclose(fp);
+	return 0;
+}

arch/mips/cavium-octeon/csrc-octeon.c

@@ -19,6 +19,7 @@
 #include <asm/octeon/cvmx-ipd-defs.h>
 #include <asm/octeon/cvmx-mio-defs.h>
 #include <asm/octeon/cvmx-rst-defs.h>
+#include <asm/octeon/cvmx-fpa-defs.h>
 
 static u64 f;
 static u64 rdiv;
@@ -65,9 +66,13 @@ void __init octeon_setup_delays(void)
  */
 void octeon_init_cvmcount(void)
 {
+	u64 clk_reg;
 	unsigned long flags;
 	unsigned loops = 2;
 
+	clk_reg = octeon_has_feature(OCTEON_FEATURE_FPA3) ?
+		CVMX_FPA_CLK_COUNT : CVMX_IPD_CLK_COUNT;
+
 	/* Clobber loops so GCC will not unroll the following while loop. */
 	asm("" : "+r" (loops));
 
@@ -77,18 +82,18 @@ void octeon_init_cvmcount(void)
 	 * which should give more deterministic timing.
 	 */
 	while (loops--) {
-		u64 ipd_clk_count = cvmx_read_csr(CVMX_IPD_CLK_COUNT);
+		u64 clk_count = cvmx_read_csr(clk_reg);
 		if (rdiv != 0) {
-			ipd_clk_count *= rdiv;
+			clk_count *= rdiv;
 			if (f != 0) {
 				asm("dmultu\t%[cnt],%[f]\n\t"
 				    "mfhi\t%[cnt]"
-				    : [cnt] "+r" (ipd_clk_count)
+				    : [cnt] "+r" (clk_count)
 				    : [f] "r" (f)
 				    : "hi", "lo");
 			}
 		}
-		write_c0_cvmcount(ipd_clk_count);
+		write_c0_cvmcount(clk_count);
 	}
 	local_irq_restore(flags);
 }

arch/mips/cavium-octeon/executive/cvmx-helper.c

@@ -87,6 +87,8 @@ int cvmx_helper_get_number_of_interfaces(void)
 		return 9;
 	if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX))
 		return 4;
+	if (OCTEON_IS_MODEL(OCTEON_CN7XXX))
+		return 5;
 	else
 		return 3;
 }
@@ -259,6 +261,41 @@ static cvmx_helper_interface_mode_t __cvmx_get_mode_octeon2(int interface)
 	}
 }
 
+/**
+ * @INTERNAL
+ * Return interface mode for CN7XXX.
+ */
+static cvmx_helper_interface_mode_t __cvmx_get_mode_cn7xxx(int interface)
+{
+	union cvmx_gmxx_inf_mode mode;
+
+	mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
+
+	switch (interface) {
+	case 0:
+	case 1:
+		switch (mode.cn68xx.mode) {
+		case 0:
+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+		case 1:
+		case 2:
+			return CVMX_HELPER_INTERFACE_MODE_SGMII;
+		case 3:
+			return CVMX_HELPER_INTERFACE_MODE_XAUI;
+		default:
+			return CVMX_HELPER_INTERFACE_MODE_SGMII;
+		}
+	case 2:
+		return CVMX_HELPER_INTERFACE_MODE_NPI;
+	case 3:
+		return CVMX_HELPER_INTERFACE_MODE_LOOP;
+	case 4:
+		return CVMX_HELPER_INTERFACE_MODE_RGMII;
+	default:
+		return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+	}
+}
+
 /**
  * Get the operating mode of an interface. Depending on the Octeon
  * chip and configuration, this function returns an enumeration
@@ -277,6 +314,12 @@ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface)
 	    interface >= cvmx_helper_get_number_of_interfaces())
 		return CVMX_HELPER_INTERFACE_MODE_DISABLED;
 
+	/*
+	 * OCTEON III models
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN7XXX))
+		return __cvmx_get_mode_cn7xxx(interface);
+
 	/*
 	 * Octeon II models
 	 */

arch/mips/cavium-octeon/executive/cvmx-sysinfo.c

@@ -32,86 +32,22 @@
 #include <linux/module.h>
 
 #include <asm/octeon/cvmx.h>
-#include <asm/octeon/cvmx-spinlock.h>
 #include <asm/octeon/cvmx-sysinfo.h>
 
-/**
+/*
  * This structure defines the private state maintained by sysinfo module.
- *
  */
-static struct {
-	struct cvmx_sysinfo sysinfo;	   /* system information */
-	cvmx_spinlock_t lock;	   /* mutex spinlock */
-
-} state = {
-	.lock = CVMX_SPINLOCK_UNLOCKED_INITIALIZER
-};
-
+static struct cvmx_sysinfo sysinfo;	   /* system information */
 
 /*
- * Global variables that define the min/max of the memory region set
- * up for 32 bit userspace access.
- */
-uint64_t linux_mem32_min;
-uint64_t linux_mem32_max;
-uint64_t linux_mem32_wired;
-uint64_t linux_mem32_offset;
-
-/**
- * This function returns the application information as obtained
+ * Returns the application information as obtained
  * by the bootloader.  This provides the core mask of the cores
  * running the same application image, as well as the physical
  * memory regions available to the core.
- *
- * Returns  Pointer to the boot information structure
- *
  */
 struct cvmx_sysinfo *cvmx_sysinfo_get(void)
 {
-	return &(state.sysinfo);
+	return &sysinfo;
 }
 EXPORT_SYMBOL(cvmx_sysinfo_get);
 
-/**
- * This function is used in non-simple executive environments (such as
- * Linux kernel, u-boot, etc.)	to configure the minimal fields that
- * are required to use simple executive files directly.
- *
- * Locking (if required) must be handled outside of this
- * function
- *
- * @phy_mem_desc_ptr:
- *		     Pointer to global physical memory descriptor
- *		     (bootmem descriptor) @board_type: Octeon board
- *		     type enumeration
- *
- * @board_rev_major:
- *		     Board major revision
- * @board_rev_minor:
- *		     Board minor revision
- * @cpu_clock_hz:
- *		     CPU clock freqency in hertz
- *
- * Returns 0: Failure
- *	   1: success
- */
-int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr,
-				    uint16_t board_type,
-				    uint8_t board_rev_major,
-				    uint8_t board_rev_minor,
-				    uint32_t cpu_clock_hz)
-{
-
-	/* The sysinfo structure was already initialized */
-	if (state.sysinfo.board_type)
-		return 0;
-
-	memset(&(state.sysinfo), 0x0, sizeof(state.sysinfo));
-	state.sysinfo.phy_mem_desc_ptr = phy_mem_desc_ptr;
-	state.sysinfo.board_type = board_type;
-	state.sysinfo.board_rev_major = board_rev_major;
-	state.sysinfo.board_rev_minor = board_rev_minor;
-	state.sysinfo.cpu_clock_hz = cpu_clock_hz;
-
-	return 1;
-}

arch/mips/cavium-octeon/executive/octeon-model.c

@@ -71,11 +71,11 @@ static const char *__init octeon_model_get_string_buffer(uint32_t chip_id,
 	uint32_t fuse_data = 0;
 
 	fus3.u64 = 0;
-	if (!OCTEON_IS_MODEL(OCTEON_CN6XXX))
+	if (OCTEON_IS_MODEL(OCTEON_CN3XXX) || OCTEON_IS_MODEL(OCTEON_CN5XXX))
 		fus3.u64 = cvmx_read_csr(CVMX_L2D_FUS3);
 	fus_dat2.u64 = cvmx_read_csr(CVMX_MIO_FUS_DAT2);
 	fus_dat3.u64 = cvmx_read_csr(CVMX_MIO_FUS_DAT3);
-	num_cores = cvmx_pop(cvmx_read_csr(CVMX_CIU_FUSE));
+	num_cores = cvmx_octeon_num_cores();
 
 	/* Make sure the non existent devices look disabled */
 	switch ((chip_id >> 8) & 0xff) {
@@ -121,6 +121,15 @@ static const char *__init octeon_model_get_string_buffer(uint32_t chip_id,
 	 * later.
 	 */
 	switch (num_cores) {
+	case 48:
+		core_model = "90";
+		break;
+	case 44:
+		core_model = "88";
+		break;
+	case 40:
+		core_model = "85";
+		break;
 	case 32:
 		core_model = "80";
 		break;
@@ -297,7 +306,7 @@ static const char *__init octeon_model_get_string_buffer(uint32_t chip_id,
 				if (fus_dat3.s.nozip)
 					suffix = "SCP";
 
-				if (fus_dat3.s.bar2_en)
+				if (fus_dat3.cn56xx.bar2_en)
 					suffix = "NSPB2";
 			}
 			if (fus3.cn56xx.crip_1024k)
@@ -369,6 +378,73 @@ static const char *__init octeon_model_get_string_buffer(uint32_t chip_id,
 		else
 			suffix = "AAP";
 		break;
+	case 0x94:		/* CNF71XX */
+		family = "F71";
+		if (fus_dat3.cnf71xx.nozip)
+			suffix = "SCP";
+		else
+			suffix = "AAP";
+		break;
+	case 0x95:		/* CN78XX */
+		if (num_cores == 6)	/* Other core counts match generic */
+			core_model = "35";
+		if (OCTEON_IS_MODEL(OCTEON_CN76XX))
+			family = "76";
+		else
+			family = "78";
+		if (fus_dat3.cn78xx.l2c_crip == 2)
+			family = "77";
+		if (fus_dat3.cn78xx.nozip
+		    && fus_dat3.cn78xx.nodfa_dte
+		    && fus_dat3.cn78xx.nohna_dte) {
+			if (fus_dat3.cn78xx.nozip &&
+				!fus_dat2.cn78xx.raid_en &&
+				fus_dat3.cn78xx.nohna_dte) {
+				suffix = "CP";
+			} else {
+				suffix = "SCP";
+			}
+		} else if (fus_dat2.cn78xx.raid_en == 0)
+			suffix = "HCP";
+		else
+			suffix = "AAP";
+		break;
+	case 0x96:		/* CN70XX */
+		family = "70";
+		if (cvmx_read_csr(CVMX_MIO_FUS_PDF) & (0x1ULL << 32))
+			family = "71";
+		if (fus_dat2.cn70xx.nocrypto)
+			suffix = "CP";
+		else if (fus_dat3.cn70xx.nodfa_dte)
+			suffix = "SCP";
+		else
+			suffix = "AAP";
+		break;
+	case 0x97:		/* CN73XX */
+		if (num_cores == 6)	/* Other core counts match generic */
+			core_model = "35";
+		family = "73";
+		if (fus_dat3.cn73xx.l2c_crip == 2)
+			family = "72";
+		if (fus_dat3.cn73xx.nozip
+				&& fus_dat3.cn73xx.nodfa_dte
+				&& fus_dat3.cn73xx.nohna_dte) {
+			if (!fus_dat2.cn73xx.raid_en)
+				suffix = "CP";
+			else
+				suffix = "SCP";
+		} else
+			suffix = "AAP";
+		break;
+	case 0x98:		/* CN75XX */
+		family = "F75";
+		if (fus_dat3.cn78xx.nozip
+		    && fus_dat3.cn78xx.nodfa_dte
+		    && fus_dat3.cn78xx.nohna_dte)
+			suffix = "SCP";
+		else
+			suffix = "AAP";
+		break;
 	default:
 		family = "XX";
 		core_model = "XX";

arch/mips/cavium-octeon/octeon-irq.c

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2004-2014 Cavium, Inc.
+ * Copyright (C) 2004-2016 Cavium, Inc.
  */
 
 #include <linux/of_address.h>
@@ -19,16 +19,53 @@
 
 #include <asm/octeon/octeon.h>
 #include <asm/octeon/cvmx-ciu2-defs.h>
+#include <asm/octeon/cvmx-ciu3-defs.h>
 
 static DEFINE_PER_CPU(unsigned long, octeon_irq_ciu0_en_mirror);
 static DEFINE_PER_CPU(unsigned long, octeon_irq_ciu1_en_mirror);
 static DEFINE_PER_CPU(raw_spinlock_t, octeon_irq_ciu_spinlock);
+static DEFINE_PER_CPU(unsigned int, octeon_irq_ciu3_idt_ip2);
+
+static DEFINE_PER_CPU(unsigned int, octeon_irq_ciu3_idt_ip3);
+static DEFINE_PER_CPU(struct octeon_ciu3_info *, octeon_ciu3_info);
+#define CIU3_MBOX_PER_CORE 10
+
+/*
+ * The 8 most significant bits of the intsn identify the interrupt major block.
+ * Each major block might use its own interrupt domain. Thus 256 domains are
+ * needed.
+ */
+#define MAX_CIU3_DOMAINS		256
+
+typedef irq_hw_number_t (*octeon_ciu3_intsn2hw_t)(struct irq_domain *, unsigned int);
+
+/* Information for each ciu3 in the system */
+struct octeon_ciu3_info {
+	u64			ciu3_addr;
+	int			node;
+	struct irq_domain	*domain[MAX_CIU3_DOMAINS];
+	octeon_ciu3_intsn2hw_t	intsn2hw[MAX_CIU3_DOMAINS];
+};
+
+/* Each ciu3 in the system uses its own data (one ciu3 per node) */
+static struct octeon_ciu3_info	*octeon_ciu3_info_per_node[4];
 
 struct octeon_irq_ciu_domain_data {
 	int num_sum;  /* number of sum registers (2 or 3). */
 };
 
-static __read_mostly u8 octeon_irq_ciu_to_irq[8][64];
+/* Register offsets from ciu3_addr */
+#define CIU3_CONST		0x220
+#define CIU3_IDT_CTL(_idt)	((_idt) * 8 + 0x110000)
+#define CIU3_IDT_PP(_idt, _idx)	((_idt) * 32 + (_idx) * 8 + 0x120000)
+#define CIU3_IDT_IO(_idt)	((_idt) * 8 + 0x130000)
+#define CIU3_DEST_PP_INT(_pp_ip) ((_pp_ip) * 8 + 0x200000)
+#define CIU3_DEST_IO_INT(_io)	((_io) * 8 + 0x210000)
+#define CIU3_ISC_CTL(_intsn)	((_intsn) * 8 + 0x80000000)
+#define CIU3_ISC_W1C(_intsn)	((_intsn) * 8 + 0x90000000)
+#define CIU3_ISC_W1S(_intsn)	((_intsn) * 8 + 0xa0000000)
+
+static __read_mostly int octeon_irq_ciu_to_irq[8][64];
 
 struct octeon_ciu_chip_data {
 	union {
@@ -39,10 +76,11 @@ struct octeon_ciu_chip_data {
 		struct {		/* only used for ciu/ciu2 */
 			u8 line;
 			u8 bit;
-			u8 gpio_line;
 		};
 	};
+	int gpio_line;
 	int current_cpu;	/* Next CPU expected to take this irq */
+	int ciu_node; /* NUMA node number of the CIU */
 };
 
 struct octeon_core_chip_data {
@@ -626,6 +664,18 @@ static void octeon_irq_ciu_enable_all_v2(struct irq_data *data)
 	}
 }
 
+static int octeon_irq_ciu_set_type(struct irq_data *data, unsigned int t)
+{
+	irqd_set_trigger_type(data, t);
+
+	if (t & IRQ_TYPE_EDGE_BOTH)
+		irq_set_handler_locked(data, handle_edge_irq);
+	else
+		irq_set_handler_locked(data, handle_level_irq);
+
+	return IRQ_SET_MASK_OK;
+}
+
 static void octeon_irq_gpio_setup(struct irq_data *data)
 {
 	union cvmx_gpio_bit_cfgx cfg;
@@ -663,7 +713,7 @@ static int octeon_irq_ciu_gpio_set_type(struct irq_data *data, unsigned int t)
 	irqd_set_trigger_type(data, t);
 	octeon_irq_gpio_setup(data);
 
-	if (irqd_get_trigger_type(data) & IRQ_TYPE_EDGE_BOTH)
+	if (t & IRQ_TYPE_EDGE_BOTH)
 		irq_set_handler_locked(data, handle_edge_irq);
 	else
 		irq_set_handler_locked(data, handle_level_irq);
@@ -863,6 +913,16 @@ static int octeon_irq_ciu_set_affinity_sum2(struct irq_data *data,
 }
 #endif
 
+static unsigned int edge_startup(struct irq_data *data)
+{
+	/* ack any pending edge-irq at startup, so there is
+	 * an _edge_ to fire on when the event reappears.
+	 */
+	data->chip->irq_ack(data);
+	data->chip->irq_enable(data);
+	return 0;
+}
+
 /*
  * Newer octeon chips have support for lockless CIU operation.
  */
@@ -1158,16 +1218,6 @@ static struct irq_chip *octeon_irq_ciu_chip;
 static struct irq_chip *octeon_irq_ciu_chip_edge;
 static struct irq_chip *octeon_irq_gpio_chip;
 
-static bool octeon_irq_virq_in_range(unsigned int virq)
-{
-	/* We cannot let it overflow the mapping array. */
-	if (virq < (1ul << 8 * sizeof(octeon_irq_ciu_to_irq[0][0])))
-		return true;
-
-	WARN_ONCE(true, "virq out of range %u.\n", virq);
-	return false;
-}
-
 static int octeon_irq_ciu_map(struct irq_domain *d,
 			      unsigned int virq, irq_hw_number_t hw)
 {
@@ -1176,13 +1226,6 @@ static int octeon_irq_ciu_map(struct irq_domain *d,
 	unsigned int bit = hw & 63;
 	struct octeon_irq_ciu_domain_data *dd = d->host_data;
 
-	if (!octeon_irq_virq_in_range(virq))
-		return -EINVAL;
-
-	/* Don't map irq if it is reserved for GPIO. */
-	if (line == 0 && bit >= 16 && bit <32)
-		return 0;
-
 	if (line >= dd->num_sum || octeon_irq_ciu_to_irq[line][bit] != 0)
 		return -EINVAL;
 
@@ -1215,9 +1258,6 @@ static int octeon_irq_gpio_map(struct irq_domain *d,
 	unsigned int line, bit;
 	int r;
 
-	if (!octeon_irq_virq_in_range(virq))
-		return -EINVAL;
-
 	line = (hw + gpiod->base_hwirq) >> 6;
 	bit = (hw + gpiod->base_hwirq) & 63;
 	if (line > ARRAY_SIZE(octeon_irq_ciu_to_irq) ||
@@ -1899,9 +1939,6 @@ static int octeon_irq_ciu2_map(struct irq_domain *d,
 	unsigned int line = hw >> 6;
 	unsigned int bit = hw & 63;
 
-	if (!octeon_irq_virq_in_range(virq))
-		return -EINVAL;
-
 	/*
 	 * Don't map irq if it is reserved for GPIO.
 	 * (Line 7 are the GPIO lines.)
@@ -2294,10 +2331,598 @@ static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 	return 0;
 }
 
+int octeon_irq_ciu3_xlat(struct irq_domain *d,
+			 struct device_node *node,
+			 const u32 *intspec,
+			 unsigned int intsize,
+			 unsigned long *out_hwirq,
+			 unsigned int *out_type)
+{
+	struct octeon_ciu3_info *ciu3_info = d->host_data;
+	unsigned int hwirq, type, intsn_major;
+	union cvmx_ciu3_iscx_ctl isc;
+
+	if (intsize < 2)
+		return -EINVAL;
+	hwirq = intspec[0];
+	type = intspec[1];
+
+	if (hwirq >= (1 << 20))
+		return -EINVAL;
+
+	intsn_major = hwirq >> 12;
+	switch (intsn_major) {
+	case 0x04: /* Software handled separately. */
+		return -EINVAL;
+	default:
+		break;
+	}
+
+	isc.u64 =  cvmx_read_csr(ciu3_info->ciu3_addr + CIU3_ISC_CTL(hwirq));
+	if (!isc.s.imp)
+		return -EINVAL;
+
+	switch (type) {
+	case 4: /* official value for level triggering. */
+		*out_type = IRQ_TYPE_LEVEL_HIGH;
+		break;
+	case 0: /* unofficial value, but we might as well let it work. */
+	case 1: /* official value for edge triggering. */
+		*out_type = IRQ_TYPE_EDGE_RISING;
+		break;
+	default: /* Nothing else is acceptable. */
+		return -EINVAL;
+	}
+
+	*out_hwirq = hwirq;
+
+	return 0;
+}
+
+void octeon_irq_ciu3_enable(struct irq_data *data)
+{
+	int cpu;
+	union cvmx_ciu3_iscx_ctl isc_ctl;
+	union cvmx_ciu3_iscx_w1c isc_w1c;
+	u64 isc_ctl_addr;
+
+	struct octeon_ciu_chip_data *cd;
+
+	cpu = next_cpu_for_irq(data);
+
+	cd = irq_data_get_irq_chip_data(data);
+
+	isc_w1c.u64 = 0;
+	isc_w1c.s.en = 1;
+	cvmx_write_csr(cd->ciu3_addr + CIU3_ISC_W1C(cd->intsn), isc_w1c.u64);
+
+	isc_ctl_addr = cd->ciu3_addr + CIU3_ISC_CTL(cd->intsn);
+	isc_ctl.u64 = 0;
+	isc_ctl.s.en = 1;
+	isc_ctl.s.idt = per_cpu(octeon_irq_ciu3_idt_ip2, cpu);
+	cvmx_write_csr(isc_ctl_addr, isc_ctl.u64);
+	cvmx_read_csr(isc_ctl_addr);
+}
+
+void octeon_irq_ciu3_disable(struct irq_data *data)
+{
+	u64 isc_ctl_addr;
+	union cvmx_ciu3_iscx_w1c isc_w1c;
+
+	struct octeon_ciu_chip_data *cd;
+
+	cd = irq_data_get_irq_chip_data(data);
+
+	isc_w1c.u64 = 0;
+	isc_w1c.s.en = 1;
+
+	isc_ctl_addr = cd->ciu3_addr + CIU3_ISC_CTL(cd->intsn);
+	cvmx_write_csr(cd->ciu3_addr + CIU3_ISC_W1C(cd->intsn), isc_w1c.u64);
+	cvmx_write_csr(isc_ctl_addr, 0);
+	cvmx_read_csr(isc_ctl_addr);
+}
+
+void octeon_irq_ciu3_ack(struct irq_data *data)
+{
+	u64 isc_w1c_addr;
+	union cvmx_ciu3_iscx_w1c isc_w1c;
+	struct octeon_ciu_chip_data *cd;
+	u32 trigger_type = irqd_get_trigger_type(data);
+
+	/*
+	 * We use a single irq_chip, so we have to do nothing to ack a
+	 * level interrupt.
+	 */
+	if (!(trigger_type & IRQ_TYPE_EDGE_BOTH))
+		return;
+
+	cd = irq_data_get_irq_chip_data(data);
+
+	isc_w1c.u64 = 0;
+	isc_w1c.s.raw = 1;
+
+	isc_w1c_addr = cd->ciu3_addr + CIU3_ISC_W1C(cd->intsn);
+	cvmx_write_csr(isc_w1c_addr, isc_w1c.u64);
+	cvmx_read_csr(isc_w1c_addr);
+}
+
+void octeon_irq_ciu3_mask(struct irq_data *data)
+{
+	union cvmx_ciu3_iscx_w1c isc_w1c;
+	u64 isc_w1c_addr;
+	struct octeon_ciu_chip_data *cd;
+
+	cd = irq_data_get_irq_chip_data(data);
+
+	isc_w1c.u64 = 0;
+	isc_w1c.s.en = 1;
+
+	isc_w1c_addr = cd->ciu3_addr + CIU3_ISC_W1C(cd->intsn);
+	cvmx_write_csr(isc_w1c_addr, isc_w1c.u64);
+	cvmx_read_csr(isc_w1c_addr);
+}
+
+void octeon_irq_ciu3_mask_ack(struct irq_data *data)
+{
+	union cvmx_ciu3_iscx_w1c isc_w1c;
+	u64 isc_w1c_addr;
+	struct octeon_ciu_chip_data *cd;
+	u32 trigger_type = irqd_get_trigger_type(data);
+
+	cd = irq_data_get_irq_chip_data(data);
+
+	isc_w1c.u64 = 0;
+	isc_w1c.s.en = 1;
+
+	/*
+	 * We use a single irq_chip, so only ack an edge (!level)
+	 * interrupt.
+	 */
+	if (trigger_type & IRQ_TYPE_EDGE_BOTH)
+		isc_w1c.s.raw = 1;
+
+	isc_w1c_addr = cd->ciu3_addr + CIU3_ISC_W1C(cd->intsn);
+	cvmx_write_csr(isc_w1c_addr, isc_w1c.u64);
+	cvmx_read_csr(isc_w1c_addr);
+}
+
+#ifdef CONFIG_SMP
+int octeon_irq_ciu3_set_affinity(struct irq_data *data,
+				 const struct cpumask *dest, bool force)
+{
+	union cvmx_ciu3_iscx_ctl isc_ctl;
+	union cvmx_ciu3_iscx_w1c isc_w1c;
+	u64 isc_ctl_addr;
+	int cpu;
+	bool enable_one = !irqd_irq_disabled(data) && !irqd_irq_masked(data);
+	struct octeon_ciu_chip_data *cd = irq_data_get_irq_chip_data(data);
+
+	if (!cpumask_subset(dest, cpumask_of_node(cd->ciu_node)))
+		return -EINVAL;
+
+	if (!enable_one)
+		return IRQ_SET_MASK_OK;
+
+	cd = irq_data_get_irq_chip_data(data);
+	cpu = cpumask_first(dest);
+	if (cpu >= nr_cpu_ids)
+		cpu = smp_processor_id();
+	cd->current_cpu = cpu;
+
+	isc_w1c.u64 = 0;
+	isc_w1c.s.en = 1;
+	cvmx_write_csr(cd->ciu3_addr + CIU3_ISC_W1C(cd->intsn), isc_w1c.u64);
+
+	isc_ctl_addr = cd->ciu3_addr + CIU3_ISC_CTL(cd->intsn);
+	isc_ctl.u64 = 0;
+	isc_ctl.s.en = 1;
+	isc_ctl.s.idt = per_cpu(octeon_irq_ciu3_idt_ip2, cpu);
+	cvmx_write_csr(isc_ctl_addr, isc_ctl.u64);
+	cvmx_read_csr(isc_ctl_addr);
+
+	return IRQ_SET_MASK_OK;
+}
+#endif
+
+static struct irq_chip octeon_irq_chip_ciu3 = {
+	.name = "CIU3",
+	.irq_startup = edge_startup,
+	.irq_enable = octeon_irq_ciu3_enable,
+	.irq_disable = octeon_irq_ciu3_disable,
+	.irq_ack = octeon_irq_ciu3_ack,
+	.irq_mask = octeon_irq_ciu3_mask,
+	.irq_mask_ack = octeon_irq_ciu3_mask_ack,
+	.irq_unmask = octeon_irq_ciu3_enable,
+	.irq_set_type = octeon_irq_ciu_set_type,
+#ifdef CONFIG_SMP
+	.irq_set_affinity = octeon_irq_ciu3_set_affinity,
+	.irq_cpu_offline = octeon_irq_cpu_offline_ciu,
+#endif
+};
+
+int octeon_irq_ciu3_mapx(struct irq_domain *d, unsigned int virq,
+			 irq_hw_number_t hw, struct irq_chip *chip)
+{
+	struct octeon_ciu3_info *ciu3_info = d->host_data;
+	struct octeon_ciu_chip_data *cd = kzalloc_node(sizeof(*cd), GFP_KERNEL,
+						       ciu3_info->node);
+	if (!cd)
+		return -ENOMEM;
+	cd->intsn = hw;
+	cd->current_cpu = -1;
+	cd->ciu3_addr = ciu3_info->ciu3_addr;
+	cd->ciu_node = ciu3_info->node;
+	irq_set_chip_and_handler(virq, chip, handle_edge_irq);
+	irq_set_chip_data(virq, cd);
+
+	return 0;
+}
+
+static int octeon_irq_ciu3_map(struct irq_domain *d,
+			       unsigned int virq, irq_hw_number_t hw)
+{
+	return octeon_irq_ciu3_mapx(d, virq, hw, &octeon_irq_chip_ciu3);
+}
+
+static struct irq_domain_ops octeon_dflt_domain_ciu3_ops = {
+	.map = octeon_irq_ciu3_map,
+	.unmap = octeon_irq_free_cd,
+	.xlate = octeon_irq_ciu3_xlat,
+};
+
+static void octeon_irq_ciu3_ip2(void)
+{
+	union cvmx_ciu3_destx_pp_int dest_pp_int;
+	struct octeon_ciu3_info *ciu3_info;
+	u64 ciu3_addr;
+
+	ciu3_info = __this_cpu_read(octeon_ciu3_info);
+	ciu3_addr = ciu3_info->ciu3_addr;
+
+	dest_pp_int.u64 = cvmx_read_csr(ciu3_addr + CIU3_DEST_PP_INT(3 * cvmx_get_local_core_num()));
+
+	if (likely(dest_pp_int.s.intr)) {
+		irq_hw_number_t intsn = dest_pp_int.s.intsn;
+		irq_hw_number_t hw;
+		struct irq_domain *domain;
+		/* Get the domain to use from the major block */
+		int block = intsn >> 12;
+		int ret;
+
+		domain = ciu3_info->domain[block];
+		if (ciu3_info->intsn2hw[block])
+			hw = ciu3_info->intsn2hw[block](domain, intsn);
+		else
+			hw = intsn;
+
+		ret = handle_domain_irq(domain, hw, NULL);
+		if (ret < 0) {
+			union cvmx_ciu3_iscx_w1c isc_w1c;
+			u64 isc_w1c_addr = ciu3_addr + CIU3_ISC_W1C(intsn);
+
+			isc_w1c.u64 = 0;
+			isc_w1c.s.en = 1;
+			cvmx_write_csr(isc_w1c_addr, isc_w1c.u64);
+			cvmx_read_csr(isc_w1c_addr);
+			spurious_interrupt();
+		}
+	} else {
+		spurious_interrupt();
+	}
+}
+
+/*
+ * 10 mbox per core starting from zero.
+ * Base mbox is core * 10
+ */
+static unsigned int octeon_irq_ciu3_base_mbox_intsn(int core)
+{
+	/* SW (mbox) are 0x04 in bits 12..19 */
+	return 0x04000 + CIU3_MBOX_PER_CORE * core;
+}
+
+static unsigned int octeon_irq_ciu3_mbox_intsn_for_core(int core, unsigned int mbox)
+{
+	return octeon_irq_ciu3_base_mbox_intsn(core) + mbox;
+}
+
+static unsigned int octeon_irq_ciu3_mbox_intsn_for_cpu(int cpu, unsigned int mbox)
+{
+	int local_core = octeon_coreid_for_cpu(cpu) & 0x3f;
+
+	return octeon_irq_ciu3_mbox_intsn_for_core(local_core, mbox);
+}
+
+static void octeon_irq_ciu3_mbox(void)
+{
+	union cvmx_ciu3_destx_pp_int dest_pp_int;
+	struct octeon_ciu3_info *ciu3_info;
+	u64 ciu3_addr;
+	int core = cvmx_get_local_core_num();
+
+	ciu3_info = __this_cpu_read(octeon_ciu3_info);
+	ciu3_addr = ciu3_info->ciu3_addr;
+
+	dest_pp_int.u64 = cvmx_read_csr(ciu3_addr + CIU3_DEST_PP_INT(1 + 3 * core));
+
+	if (likely(dest_pp_int.s.intr)) {
+		irq_hw_number_t intsn = dest_pp_int.s.intsn;
+		int mbox = intsn - octeon_irq_ciu3_base_mbox_intsn(core);
+
+		if (likely(mbox >= 0 && mbox < CIU3_MBOX_PER_CORE)) {
+			do_IRQ(mbox + OCTEON_IRQ_MBOX0);
+		} else {
+			union cvmx_ciu3_iscx_w1c isc_w1c;
+			u64 isc_w1c_addr = ciu3_addr + CIU3_ISC_W1C(intsn);
+
+			isc_w1c.u64 = 0;
+			isc_w1c.s.en = 1;
+			cvmx_write_csr(isc_w1c_addr, isc_w1c.u64);
+			cvmx_read_csr(isc_w1c_addr);
+			spurious_interrupt();
+		}
+	} else {
+		spurious_interrupt();
+	}
+}
+
+void octeon_ciu3_mbox_send(int cpu, unsigned int mbox)
+{
+	struct octeon_ciu3_info *ciu3_info;
+	unsigned int intsn;
+	union cvmx_ciu3_iscx_w1s isc_w1s;
+	u64 isc_w1s_addr;
+
+	if (WARN_ON_ONCE(mbox >= CIU3_MBOX_PER_CORE))
+		return;
+
+	intsn = octeon_irq_ciu3_mbox_intsn_for_cpu(cpu, mbox);
+	ciu3_info = per_cpu(octeon_ciu3_info, cpu);
+	isc_w1s_addr = ciu3_info->ciu3_addr + CIU3_ISC_W1S(intsn);
+
+	isc_w1s.u64 = 0;
+	isc_w1s.s.raw = 1;
+
+	cvmx_write_csr(isc_w1s_addr, isc_w1s.u64);
+	cvmx_read_csr(isc_w1s_addr);
+}
+
+static void octeon_irq_ciu3_mbox_set_enable(struct irq_data *data, int cpu, bool en)
+{
+	struct octeon_ciu3_info *ciu3_info;
+	unsigned int intsn;
+	u64 isc_ctl_addr, isc_w1c_addr;
+	union cvmx_ciu3_iscx_ctl isc_ctl;
+	unsigned int mbox = data->irq - OCTEON_IRQ_MBOX0;
+
+	intsn = octeon_irq_ciu3_mbox_intsn_for_cpu(cpu, mbox);
+	ciu3_info = per_cpu(octeon_ciu3_info, cpu);
+	isc_w1c_addr = ciu3_info->ciu3_addr + CIU3_ISC_W1C(intsn);
+	isc_ctl_addr = ciu3_info->ciu3_addr + CIU3_ISC_CTL(intsn);
+
+	isc_ctl.u64 = 0;
+	isc_ctl.s.en = 1;
+
+	cvmx_write_csr(isc_w1c_addr, isc_ctl.u64);
+	cvmx_write_csr(isc_ctl_addr, 0);
+	if (en) {
+		unsigned int idt = per_cpu(octeon_irq_ciu3_idt_ip3, cpu);
+
+		isc_ctl.u64 = 0;
+		isc_ctl.s.en = 1;
+		isc_ctl.s.idt = idt;
+		cvmx_write_csr(isc_ctl_addr, isc_ctl.u64);
+	}
+	cvmx_read_csr(isc_ctl_addr);
+}
+
+static void octeon_irq_ciu3_mbox_enable(struct irq_data *data)
+{
+	int cpu;
+	unsigned int mbox = data->irq - OCTEON_IRQ_MBOX0;
+
+	WARN_ON(mbox >= CIU3_MBOX_PER_CORE);
+
+	for_each_online_cpu(cpu)
+		octeon_irq_ciu3_mbox_set_enable(data, cpu, true);
+}
+
+static void octeon_irq_ciu3_mbox_disable(struct irq_data *data)
+{
+	int cpu;
+	unsigned int mbox = data->irq - OCTEON_IRQ_MBOX0;
+
+	WARN_ON(mbox >= CIU3_MBOX_PER_CORE);
+
+	for_each_online_cpu(cpu)
+		octeon_irq_ciu3_mbox_set_enable(data, cpu, false);
+}
+
+static void octeon_irq_ciu3_mbox_ack(struct irq_data *data)
+{
+	struct octeon_ciu3_info *ciu3_info;
+	unsigned int intsn;
+	u64 isc_w1c_addr;
+	union cvmx_ciu3_iscx_w1c isc_w1c;
+	unsigned int mbox = data->irq - OCTEON_IRQ_MBOX0;
+
+	intsn = octeon_irq_ciu3_mbox_intsn_for_core(cvmx_get_local_core_num(), mbox);
+
+	isc_w1c.u64 = 0;
+	isc_w1c.s.raw = 1;
+
+	ciu3_info = __this_cpu_read(octeon_ciu3_info);
+	isc_w1c_addr = ciu3_info->ciu3_addr + CIU3_ISC_W1C(intsn);
+	cvmx_write_csr(isc_w1c_addr, isc_w1c.u64);
+	cvmx_read_csr(isc_w1c_addr);
+}
+
+static void octeon_irq_ciu3_mbox_cpu_online(struct irq_data *data)
+{
+	octeon_irq_ciu3_mbox_set_enable(data, smp_processor_id(), true);
+}
+
+static void octeon_irq_ciu3_mbox_cpu_offline(struct irq_data *data)
+{
+	octeon_irq_ciu3_mbox_set_enable(data, smp_processor_id(), false);
+}
+
+static int octeon_irq_ciu3_alloc_resources(struct octeon_ciu3_info *ciu3_info)
+{
+	u64 b = ciu3_info->ciu3_addr;
+	int idt_ip2, idt_ip3, idt_ip4;
+	int unused_idt2;
+	int core = cvmx_get_local_core_num();
+	int i;
+
+	__this_cpu_write(octeon_ciu3_info, ciu3_info);
+
+	/*
+	 * 4 idt per core starting from 1 because zero is reserved.
+	 * Base idt per core is 4 * core + 1
+	 */
+	idt_ip2 = core * 4 + 1;
+	idt_ip3 = core * 4 + 2;
+	idt_ip4 = core * 4 + 3;
+	unused_idt2 = core * 4 + 4;
+	__this_cpu_write(octeon_irq_ciu3_idt_ip2, idt_ip2);
+	__this_cpu_write(octeon_irq_ciu3_idt_ip3, idt_ip3);
+
+	/* ip2 interrupts for this CPU */
+	cvmx_write_csr(b + CIU3_IDT_CTL(idt_ip2), 0);
+	cvmx_write_csr(b + CIU3_IDT_PP(idt_ip2, 0), 1ull << core);
+	cvmx_write_csr(b + CIU3_IDT_IO(idt_ip2), 0);
+
+	/* ip3 interrupts for this CPU */
+	cvmx_write_csr(b + CIU3_IDT_CTL(idt_ip3), 1);
+	cvmx_write_csr(b + CIU3_IDT_PP(idt_ip3, 0), 1ull << core);
+	cvmx_write_csr(b + CIU3_IDT_IO(idt_ip3), 0);
+
+	/* ip4 interrupts for this CPU */
+	cvmx_write_csr(b + CIU3_IDT_CTL(idt_ip4), 2);
+	cvmx_write_csr(b + CIU3_IDT_PP(idt_ip4, 0), 0);
+	cvmx_write_csr(b + CIU3_IDT_IO(idt_ip4), 0);
+
+	cvmx_write_csr(b + CIU3_IDT_CTL(unused_idt2), 0);
+	cvmx_write_csr(b + CIU3_IDT_PP(unused_idt2, 0), 0);
+	cvmx_write_csr(b + CIU3_IDT_IO(unused_idt2), 0);
+
+	for (i = 0; i < CIU3_MBOX_PER_CORE; i++) {
+		unsigned int intsn = octeon_irq_ciu3_mbox_intsn_for_core(core, i);
+
+		cvmx_write_csr(b + CIU3_ISC_W1C(intsn), 2);
+		cvmx_write_csr(b + CIU3_ISC_CTL(intsn), 0);
+	}
+
+	return 0;
+}
+
+static void octeon_irq_setup_secondary_ciu3(void)
+{
+	struct octeon_ciu3_info *ciu3_info;
+
+	ciu3_info = octeon_ciu3_info_per_node[cvmx_get_node_num()];
+	octeon_irq_ciu3_alloc_resources(ciu3_info);
+	irq_cpu_online();
+
+	/* Enable the CIU lines */
+	set_c0_status(STATUSF_IP3 | STATUSF_IP2);
+	if (octeon_irq_use_ip4)
+		set_c0_status(STATUSF_IP4);
+	else
+		clear_c0_status(STATUSF_IP4);
+}
+
+static struct irq_chip octeon_irq_chip_ciu3_mbox = {
+	.name = "CIU3-M",
+	.irq_enable = octeon_irq_ciu3_mbox_enable,
+	.irq_disable = octeon_irq_ciu3_mbox_disable,
+	.irq_ack = octeon_irq_ciu3_mbox_ack,
+
+	.irq_cpu_online = octeon_irq_ciu3_mbox_cpu_online,
+	.irq_cpu_offline = octeon_irq_ciu3_mbox_cpu_offline,
+	.flags = IRQCHIP_ONOFFLINE_ENABLED,
+};
+
+static int __init octeon_irq_init_ciu3(struct device_node *ciu_node,
+				       struct device_node *parent)
+{
+	int i;
+	int node;
+	struct irq_domain *domain;
+	struct octeon_ciu3_info *ciu3_info;
+	const __be32 *zero_addr;
+	u64 base_addr;
+	union cvmx_ciu3_const consts;
+
+	node = 0; /* of_node_to_nid(ciu_node); */
+	ciu3_info = kzalloc_node(sizeof(*ciu3_info), GFP_KERNEL, node);
+
+	if (!ciu3_info)
+		return -ENOMEM;
+
+	zero_addr = of_get_address(ciu_node, 0, NULL, NULL);
+	if (WARN_ON(!zero_addr))
+		return -EINVAL;
+
+	base_addr = of_translate_address(ciu_node, zero_addr);
+	base_addr = (u64)phys_to_virt(base_addr);
+
+	ciu3_info->ciu3_addr = base_addr;
+	ciu3_info->node = node;
+
+	consts.u64 = cvmx_read_csr(base_addr + CIU3_CONST);
+
+	octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu3;
+
+	octeon_irq_ip2 = octeon_irq_ciu3_ip2;
+	octeon_irq_ip3 = octeon_irq_ciu3_mbox;
+	octeon_irq_ip4 = octeon_irq_ip4_mask;
+
+	if (node == cvmx_get_node_num()) {
+		/* Mips internal */
+		octeon_irq_init_core();
+
+		/* Only do per CPU things if it is the CIU of the boot node. */
+		i = irq_alloc_descs_from(OCTEON_IRQ_MBOX0, 8, node);
+		WARN_ON(i < 0);
+
+		for (i = 0; i < 8; i++)
+			irq_set_chip_and_handler(i + OCTEON_IRQ_MBOX0,
+						 &octeon_irq_chip_ciu3_mbox, handle_percpu_irq);
+	}
+
+	/*
+	 * Initialize all domains to use the default domain. Specific major
+	 * blocks will overwrite the default domain as needed.
+	 */
+	domain = irq_domain_add_tree(ciu_node, &octeon_dflt_domain_ciu3_ops,
+				     ciu3_info);
+	for (i = 0; i < MAX_CIU3_DOMAINS; i++)
+		ciu3_info->domain[i] = domain;
+
+	octeon_ciu3_info_per_node[node] = ciu3_info;
+
+	if (node == cvmx_get_node_num()) {
+		/* Only do per CPU things if it is the CIU of the boot node. */
+		octeon_irq_ciu3_alloc_resources(ciu3_info);
+		if (node == 0)
+			irq_set_default_host(domain);
+
+		octeon_irq_use_ip4 = false;
+		/* Enable the CIU lines */
+		set_c0_status(STATUSF_IP2 | STATUSF_IP3);
+		clear_c0_status(STATUSF_IP4);
+	}
+
+	return 0;
+}
+
 static struct of_device_id ciu_types[] __initdata = {
 	{.compatible = "cavium,octeon-3860-ciu", .data = octeon_irq_init_ciu},
 	{.compatible = "cavium,octeon-3860-gpio", .data = octeon_irq_init_gpio},
 	{.compatible = "cavium,octeon-6880-ciu2", .data = octeon_irq_init_ciu2},
+	{.compatible = "cavium,octeon-7890-ciu3", .data = octeon_irq_init_ciu3},
 	{.compatible = "cavium,octeon-7130-cib", .data = octeon_irq_init_cib},
 	{}
 };

arch/mips/cavium-octeon/octeon-platform.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/usb.h>
 #include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
@@ -525,10 +526,17 @@ static void __init octeon_fdt_set_phy(int eth, int phy_addr)
 
 static void __init octeon_fdt_set_mac_addr(int n, u64 *pmac)
 {
+	const u8 *old_mac;
+	int old_len;
 	u8 new_mac[6];
 	u64 mac = *pmac;
 	int r;
 
+	old_mac = fdt_getprop(initial_boot_params, n, "local-mac-address",
+			      &old_len);
+	if (!old_mac || old_len != 6 || is_valid_ether_addr(old_mac))
+		return;
+
 	new_mac[0] = (mac >> 40) & 0xff;
 	new_mac[1] = (mac >> 32) & 0xff;
 	new_mac[2] = (mac >> 24) & 0xff;
@@ -560,7 +568,7 @@ static void __init octeon_fdt_rm_ethernet(int node)
 	fdt_nop_node(initial_boot_params, node);
 }
 
-static void __init octeon_fdt_pip_port(int iface, int i, int p, int max, u64 *pmac)
+static void __init octeon_fdt_pip_port(int iface, int i, int p, int max)
 {
 	char name_buffer[20];
 	int eth;
@@ -583,10 +591,9 @@ static void __init octeon_fdt_pip_port(int iface, int i, int p, int max, u64 *pm
 
 	phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
 	octeon_fdt_set_phy(eth, phy_addr);
-	octeon_fdt_set_mac_addr(eth, pmac);
 }
 
-static void __init octeon_fdt_pip_iface(int pip, int idx, u64 *pmac)
+static void __init octeon_fdt_pip_iface(int pip, int idx)
 {
 	char name_buffer[20];
 	int iface;
@@ -602,7 +609,73 @@ static void __init octeon_fdt_pip_iface(int pip, int idx, u64 *pmac)
 		count = cvmx_helper_ports_on_interface(idx);
 
 	for (p = 0; p < 16; p++)
-		octeon_fdt_pip_port(iface, idx, p, count - 1, pmac);
+		octeon_fdt_pip_port(iface, idx, p, count - 1);
+}
+
+void __init octeon_fill_mac_addresses(void)
+{
+	const char *alias_prop;
+	char name_buffer[20];
+	u64 mac_addr_base;
+	int aliases;
+	int pip;
+	int i;
+
+	aliases = fdt_path_offset(initial_boot_params, "/aliases");
+	if (aliases < 0)
+		return;
+
+	mac_addr_base =
+		((octeon_bootinfo->mac_addr_base[0] & 0xffull)) << 40 |
+		((octeon_bootinfo->mac_addr_base[1] & 0xffull)) << 32 |
+		((octeon_bootinfo->mac_addr_base[2] & 0xffull)) << 24 |
+		((octeon_bootinfo->mac_addr_base[3] & 0xffull)) << 16 |
+		((octeon_bootinfo->mac_addr_base[4] & 0xffull)) << 8 |
+		 (octeon_bootinfo->mac_addr_base[5] & 0xffull);
+
+	for (i = 0; i < 2; i++) {
+		int mgmt;
+
+		snprintf(name_buffer, sizeof(name_buffer), "mix%d", i);
+		alias_prop = fdt_getprop(initial_boot_params, aliases,
+					 name_buffer, NULL);
+		if (!alias_prop)
+			continue;
+		mgmt = fdt_path_offset(initial_boot_params, alias_prop);
+		if (mgmt < 0)
+			continue;
+		octeon_fdt_set_mac_addr(mgmt, &mac_addr_base);
+	}
+
+	alias_prop = fdt_getprop(initial_boot_params, aliases, "pip", NULL);
+	if (!alias_prop)
+		return;
+
+	pip = fdt_path_offset(initial_boot_params, alias_prop);
+	if (pip < 0)
+		return;
+
+	for (i = 0; i <= 4; i++) {
+		int iface;
+		int p;
+
+		snprintf(name_buffer, sizeof(name_buffer), "interface@%d", i);
+		iface = fdt_subnode_offset(initial_boot_params, pip,
+					   name_buffer);
+		if (iface < 0)
+			continue;
+		for (p = 0; p < 16; p++) {
+			int eth;
+
+			snprintf(name_buffer, sizeof(name_buffer),
+				 "ethernet@%x", p);
+			eth = fdt_subnode_offset(initial_boot_params, iface,
+						 name_buffer);
+			if (eth < 0)
+				continue;
+			octeon_fdt_set_mac_addr(eth, &mac_addr_base);
+		}
+	}
 }
 
 int __init octeon_prune_device_tree(void)
@@ -612,7 +685,6 @@ int __init octeon_prune_device_tree(void)
 	const char *alias_prop;
 	char name_buffer[20];
 	int aliases;
-	u64 mac_addr_base;
 
 	if (fdt_check_header(initial_boot_params))
 		panic("Corrupt Device Tree.");
@@ -623,15 +695,6 @@ int __init octeon_prune_device_tree(void)
 		return -EINVAL;
 	}
 
-
-	mac_addr_base =
-		((octeon_bootinfo->mac_addr_base[0] & 0xffull)) << 40 |
-		((octeon_bootinfo->mac_addr_base[1] & 0xffull)) << 32 |
-		((octeon_bootinfo->mac_addr_base[2] & 0xffull)) << 24 |
-		((octeon_bootinfo->mac_addr_base[3] & 0xffull)) << 16 |
-		((octeon_bootinfo->mac_addr_base[4] & 0xffull)) << 8 |
-		(octeon_bootinfo->mac_addr_base[5] & 0xffull);
-
 	if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN63XX))
 		max_port = 2;
 	else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN68XX))
@@ -660,7 +723,6 @@ int __init octeon_prune_device_tree(void)
 			} else {
 				int phy_addr = cvmx_helper_board_get_mii_address(CVMX_HELPER_BOARD_MGMT_IPD_PORT + i);
 				octeon_fdt_set_phy(mgmt, phy_addr);
-				octeon_fdt_set_mac_addr(mgmt, &mac_addr_base);
 			}
 		}
 	}
@@ -670,7 +732,7 @@ int __init octeon_prune_device_tree(void)
 		int pip = fdt_path_offset(initial_boot_params, pip_path);
 		if (pip	 >= 0)
 			for (i = 0; i <= 4; i++)
-				octeon_fdt_pip_iface(pip, i, &mac_addr_base);
+				octeon_fdt_pip_iface(pip, i);
 	}
 
 	/* I2C */

arch/mips/cavium-octeon/setup.c

@@ -43,8 +43,6 @@
 #include <asm/octeon/cvmx-mio-defs.h>
 #include <asm/octeon/cvmx-rst-defs.h>
 
-extern struct plat_smp_ops octeon_smp_ops;
-
 #ifdef CONFIG_PCI
 extern void pci_console_init(const char *arg);
 #endif
@@ -466,15 +464,25 @@ static void octeon_halt(void)
 
 static char __read_mostly octeon_system_type[80];
 
-static int __init init_octeon_system_type(void)
+static void __init init_octeon_system_type(void)
 {
-	snprintf(octeon_system_type, sizeof(octeon_system_type), "%s (%s)",
-		cvmx_board_type_to_string(octeon_bootinfo->board_type),
-		octeon_model_get_string(read_c0_prid()));
+	char const *board_type;
+
+	board_type = cvmx_board_type_to_string(octeon_bootinfo->board_type);
+	if (board_type == NULL) {
+		struct device_node *root;
+		int ret;
+
+		root = of_find_node_by_path("/");
+		ret = of_property_read_string(root, "model", &board_type);
+		of_node_put(root);
+		if (ret)
+			board_type = "Unsupported Board";
+	}
 
-	return 0;
+	snprintf(octeon_system_type, sizeof(octeon_system_type), "%s (%s)",
+		 board_type, octeon_model_get_string(read_c0_prid()));
 }
-early_initcall(init_octeon_system_type);
 
 /**
  * Return a string representing the system type
@@ -492,8 +500,6 @@ const char *get_system_type(void)
 void octeon_user_io_init(void)
 {
 	union octeon_cvmemctl cvmmemctl;
-	union cvmx_iob_fau_timeout fau_timeout;
-	union cvmx_pow_nw_tim nm_tim;
 
 	/* Get the current settings for CP0_CVMMEMCTL_REG */
 	cvmmemctl.u64 = read_c0_cvmmemctl();
@@ -595,17 +601,27 @@ void octeon_user_io_init(void)
 			  CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE,
 			  CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128);
 
-	/* Set a default for the hardware timeouts */
-	fau_timeout.u64 = 0;
-	fau_timeout.s.tout_val = 0xfff;
-	/* Disable tagwait FAU timeout */
-	fau_timeout.s.tout_enb = 0;
-	cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT, fau_timeout.u64);
+	if (octeon_has_feature(OCTEON_FEATURE_FAU)) {
+		union cvmx_iob_fau_timeout fau_timeout;
+
+		/* Set a default for the hardware timeouts */
+		fau_timeout.u64 = 0;
+		fau_timeout.s.tout_val = 0xfff;
+		/* Disable tagwait FAU timeout */
+		fau_timeout.s.tout_enb = 0;
+		cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT, fau_timeout.u64);
+	}
 
-	nm_tim.u64 = 0;
-	/* 4096 cycles */
-	nm_tim.s.nw_tim = 3;
-	cvmx_write_csr(CVMX_POW_NW_TIM, nm_tim.u64);
+	if ((!OCTEON_IS_MODEL(OCTEON_CN68XX) &&
+	     !OCTEON_IS_MODEL(OCTEON_CN7XXX)) ||
+	    OCTEON_IS_MODEL(OCTEON_CN70XX)) {
+		union cvmx_pow_nw_tim nm_tim;
+
+		nm_tim.u64 = 0;
+		/* 4096 cycles */
+		nm_tim.s.nw_tim = 3;
+		cvmx_write_csr(CVMX_POW_NW_TIM, nm_tim.u64);
+	}
 
 	write_octeon_c0_icacheerr(0);
 	write_c0_derraddr1(0);
@@ -637,9 +653,22 @@ void __init prom_init(void)
 	sysinfo = cvmx_sysinfo_get();
 	memset(sysinfo, 0, sizeof(*sysinfo));
 	sysinfo->system_dram_size = octeon_bootinfo->dram_size << 20;
-	sysinfo->phy_mem_desc_ptr =
-		cvmx_phys_to_ptr(octeon_bootinfo->phy_mem_desc_addr);
-	sysinfo->core_mask = octeon_bootinfo->core_mask;
+	sysinfo->phy_mem_desc_addr = (u64)phys_to_virt(octeon_bootinfo->phy_mem_desc_addr);
+
+	if ((octeon_bootinfo->major_version > 1) ||
+	    (octeon_bootinfo->major_version == 1 &&
+	     octeon_bootinfo->minor_version >= 4))
+		cvmx_coremask_copy(&sysinfo->core_mask,
+				   &octeon_bootinfo->ext_core_mask);
+	else
+		cvmx_coremask_set64(&sysinfo->core_mask,
+				    octeon_bootinfo->core_mask);
+
+	/* Some broken u-boot pass garbage in upper bits, clear them out */
+	if (!OCTEON_IS_MODEL(OCTEON_CN78XX))
+		for (i = 512; i < 1024; i++)
+			cvmx_coremask_clear_core(&sysinfo->core_mask, i);
+
 	sysinfo->exception_base_addr = octeon_bootinfo->exception_base_addr;
 	sysinfo->cpu_clock_hz = octeon_bootinfo->eclock_hz;
 	sysinfo->dram_data_rate_hz = octeon_bootinfo->dclock_hz * 2;
@@ -867,7 +896,7 @@ void __init prom_init(void)
 #endif
 
 	octeon_user_io_init();
-	register_smp_ops(&octeon_smp_ops);
+	octeon_setup_smp();
 }
 
 /* Exclude a single page from the regions obtained in plat_mem_setup. */
@@ -1079,6 +1108,7 @@ void __init prom_free_prom_memory(void)
 	}
 }
 
+void __init octeon_fill_mac_addresses(void);
 int octeon_prune_device_tree(void);
 
 extern const char __appended_dtb;
@@ -1088,11 +1118,13 @@ void __init device_tree_init(void)
 {
 	const void *fdt;
 	bool do_prune;
+	bool fill_mac;
 
 #ifdef CONFIG_MIPS_ELF_APPENDED_DTB
 	if (!fdt_check_header(&__appended_dtb)) {
 		fdt = &__appended_dtb;
 		do_prune = false;
+		fill_mac = true;
 		pr_info("Using appended Device Tree.\n");
 	} else
 #endif
@@ -1101,13 +1133,16 @@ void __init device_tree_init(void)
 		if (fdt_check_header(fdt))
 			panic("Corrupt Device Tree passed to kernel.");
 		do_prune = false;
+		fill_mac = false;
 		pr_info("Using passed Device Tree.\n");
 	} else if (OCTEON_IS_MODEL(OCTEON_CN68XX)) {
 		fdt = &__dtb_octeon_68xx_begin;
 		do_prune = true;
+		fill_mac = true;
 	} else {
 		fdt = &__dtb_octeon_3xxx_begin;
 		do_prune = true;
+		fill_mac = true;
 	}
 
 	initial_boot_params = (void *)fdt;
@@ -1116,7 +1151,10 @@ void __init device_tree_init(void)
 		octeon_prune_device_tree();
 		pr_info("Using internal Device Tree.\n");
 	}
+	if (fill_mac)
+		octeon_fill_mac_addresses();
 	unflatten_and_copy_device_tree();
+	init_octeon_system_type();
 }
 
 static int __initdata disable_octeon_edac_p;

arch/mips/cavium-octeon/smp.c

@@ -30,25 +30,55 @@ uint64_t octeon_bootloader_entry_addr;
 EXPORT_SYMBOL(octeon_bootloader_entry_addr);
 #endif
 
+static void octeon_icache_flush(void)
+{
+	asm volatile ("synci 0($0)\n");
+}
+
+static void (*octeon_message_functions[8])(void) = {
+	scheduler_ipi,
+	generic_smp_call_function_interrupt,
+	octeon_icache_flush,
+};
+
 static irqreturn_t mailbox_interrupt(int irq, void *dev_id)
 {
-	const int coreid = cvmx_get_core_num();
-	uint64_t action;
+	u64 mbox_clrx = CVMX_CIU_MBOX_CLRX(cvmx_get_core_num());
+	u64 action;
+	int i;
+
+	/*
+	 * Make sure the function array initialization remains
+	 * correct.
+	 */
+	BUILD_BUG_ON(SMP_RESCHEDULE_YOURSELF != (1 << 0));
+	BUILD_BUG_ON(SMP_CALL_FUNCTION       != (1 << 1));
+	BUILD_BUG_ON(SMP_ICACHE_FLUSH        != (1 << 2));
+
+	/*
+	 * Load the mailbox register to figure out what we're supposed
+	 * to do.
+	 */
+	action = cvmx_read_csr(mbox_clrx);
 
-	/* Load the mailbox register to figure out what we're supposed to do */
-	action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid)) & 0xffff;
+	if (OCTEON_IS_MODEL(OCTEON_CN68XX))
+		action &= 0xff;
+	else
+		action &= 0xffff;
 
 	/* Clear the mailbox to clear the interrupt */
-	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), action);
+	cvmx_write_csr(mbox_clrx, action);
 
-	if (action & SMP_CALL_FUNCTION)
-		generic_smp_call_function_interrupt();
-	if (action & SMP_RESCHEDULE_YOURSELF)
-		scheduler_ipi();
+	for (i = 0; i < ARRAY_SIZE(octeon_message_functions) && action;) {
+		if (action & 1) {
+			void (*fn)(void) = octeon_message_functions[i];
 
-	/* Check if we've been told to flush the icache */
-	if (action & SMP_ICACHE_FLUSH)
-		asm volatile ("synci 0($0)\n");
+			if (fn)
+				fn();
+		}
+		action >>= 1;
+		i++;
+	}
 	return IRQ_HANDLED;
 }
 
@@ -97,13 +127,15 @@ static void octeon_smp_hotplug_setup(void)
 #endif
 }
 
-static void octeon_smp_setup(void)
+static void __init octeon_smp_setup(void)
 {
 	const int coreid = cvmx_get_core_num();
 	int cpus;
 	int id;
-	int core_mask = octeon_get_boot_coremask();
+	struct cvmx_sysinfo *sysinfo = cvmx_sysinfo_get();
+
 #ifdef CONFIG_HOTPLUG_CPU
+	int core_mask = octeon_get_boot_coremask();
 	unsigned int num_cores = cvmx_octeon_num_cores();
 #endif
 
@@ -119,7 +151,7 @@ static void octeon_smp_setup(void)
 	/* The present CPUs get the lowest CPU numbers. */
 	cpus = 1;
 	for (id = 0; id < NR_CPUS; id++) {
-		if ((id != coreid) && (core_mask & (1 << id))) {
+		if ((id != coreid) && cvmx_coremask_is_core_set(&sysinfo->core_mask, id)) {
 			set_cpu_possible(cpus, true);
 			set_cpu_present(cpus, true);
 			__cpu_number_map[id] = cpus;
@@ -196,7 +228,7 @@ static void octeon_init_secondary(void)
  * Callout to firmware before smp_init
  *
  */
-void octeon_prepare_cpus(unsigned int max_cpus)
+static void __init octeon_prepare_cpus(unsigned int max_cpus)
 {
 	/*
 	 * Only the low order mailbox bits are used for IPIs, leave
@@ -242,7 +274,7 @@ static int octeon_cpu_disable(void)
 	cpumask_clear_cpu(cpu, &cpu_callin_map);
 	octeon_fixup_irqs();
 
-	flush_cache_all();
+	__flush_cache_all();
 	local_flush_tlb_all();
 
 	return 0;
@@ -388,3 +420,92 @@ struct plat_smp_ops octeon_smp_ops = {
 	.cpu_die		= octeon_cpu_die,
 #endif
 };
+
+static irqreturn_t octeon_78xx_reched_interrupt(int irq, void *dev_id)
+{
+	scheduler_ipi();
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t octeon_78xx_call_function_interrupt(int irq, void *dev_id)
+{
+	generic_smp_call_function_interrupt();
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t octeon_78xx_icache_flush_interrupt(int irq, void *dev_id)
+{
+	octeon_icache_flush();
+	return IRQ_HANDLED;
+}
+
+/*
+ * Callout to firmware before smp_init
+ */
+static void octeon_78xx_prepare_cpus(unsigned int max_cpus)
+{
+	if (request_irq(OCTEON_IRQ_MBOX0 + 0,
+			octeon_78xx_reched_interrupt,
+			IRQF_PERCPU | IRQF_NO_THREAD, "Scheduler",
+			octeon_78xx_reched_interrupt)) {
+		panic("Cannot request_irq for SchedulerIPI");
+	}
+	if (request_irq(OCTEON_IRQ_MBOX0 + 1,
+			octeon_78xx_call_function_interrupt,
+			IRQF_PERCPU | IRQF_NO_THREAD, "SMP-Call",
+			octeon_78xx_call_function_interrupt)) {
+		panic("Cannot request_irq for SMP-Call");
+	}
+	if (request_irq(OCTEON_IRQ_MBOX0 + 2,
+			octeon_78xx_icache_flush_interrupt,
+			IRQF_PERCPU | IRQF_NO_THREAD, "ICache-Flush",
+			octeon_78xx_icache_flush_interrupt)) {
+		panic("Cannot request_irq for ICache-Flush");
+	}
+}
+
+static void octeon_78xx_send_ipi_single(int cpu, unsigned int action)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		if (action & 1)
+			octeon_ciu3_mbox_send(cpu, i);
+		action >>= 1;
+	}
+}
+
+static void octeon_78xx_send_ipi_mask(const struct cpumask *mask,
+				      unsigned int action)
+{
+	unsigned int cpu;
+
+	for_each_cpu(cpu, mask)
+		octeon_78xx_send_ipi_single(cpu, action);
+}
+
+static struct plat_smp_ops octeon_78xx_smp_ops = {
+	.send_ipi_single	= octeon_78xx_send_ipi_single,
+	.send_ipi_mask		= octeon_78xx_send_ipi_mask,
+	.init_secondary		= octeon_init_secondary,
+	.smp_finish		= octeon_smp_finish,
+	.boot_secondary		= octeon_boot_secondary,
+	.smp_setup		= octeon_smp_setup,
+	.prepare_cpus		= octeon_78xx_prepare_cpus,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= octeon_cpu_disable,
+	.cpu_die		= octeon_cpu_die,
+#endif
+};
+
+void __init octeon_setup_smp(void)
+{
+	struct plat_smp_ops *ops;
+
+	if (octeon_has_feature(OCTEON_FEATURE_CIU3))
+		ops = &octeon_78xx_smp_ops;
+	else
+		ops = &octeon_smp_ops;
+
+	register_smp_ops(ops);
+}

arch/mips/configs/bcm47xx_defconfig

@@ -23,7 +23,6 @@ CONFIG_IP_MROUTE=y
 CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
 CONFIG_SYN_COOKIES=y
 CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
 CONFIG_IPV6_MROUTE=y

arch/mips/configs/bcm63xx_defconfig

@@ -44,6 +44,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_MTD=y
+CONFIG_MTD_BCM63XX_PARTS=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y

arch/mips/configs/bigsur_defconfig

@@ -62,7 +62,6 @@ CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 # CONFIG_INET_LRO is not set
 CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_IPV6_OPTIMISTIC_DAD=y

arch/mips/configs/bmips_be_defconfig

@@ -36,6 +36,7 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_PRINTK_TIME=y
 CONFIG_BRCMSTB_GISB_ARB=y
 CONFIG_MTD=y
+CONFIG_MTD_BCM63XX_PARTS=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y

arch/mips/configs/cavium_octeon_defconfig

@@ -119,14 +119,16 @@ CONFIG_SPI=y
 CONFIG_SPI_OCTEON=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_HCD_PLATFORM=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PLATFORM=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_STAGING=y
 CONFIG_OCTEON_ETHERNET=y
+CONFIG_OCTEON_USB=m
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
@@ -152,6 +154,9 @@ CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MD5_OCTEON=y
+CONFIG_CRYPTO_SHA1_OCTEON=m
+CONFIG_CRYPTO_SHA256_OCTEON=m
+CONFIG_CRYPTO_SHA512_OCTEON=m
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/mips/configs/decstation_defconfig

@@ -30,7 +30,6 @@ CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m

arch/mips/configs/ip22_defconfig

@@ -48,7 +48,6 @@ CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_IPV6_OPTIMISTIC_DAD=y

arch/mips/configs/ip27_defconfig

@@ -43,7 +43,6 @@ CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_TCP_MD5SIG=y
 CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_IPV6_OPTIMISTIC_DAD=y

arch/mips/configs/jazz_defconfig

@@ -34,7 +34,6 @@ CONFIG_IP_PIMSM_V2=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m

arch/mips/configs/lemote2f_defconfig

@@ -71,7 +71,6 @@ CONFIG_TCP_CONG_ADVANCED=y
 CONFIG_TCP_CONG_BIC=y
 CONFIG_DEFAULT_BIC=y
 CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y

arch/mips/configs/ls1b_defconfig → arch/mips/configs/loongson1b_defconfig

@@ -1,19 +1,17 @@
 CONFIG_MACH_LOONGSON32=y
 CONFIG_PREEMPT=y
 # CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_XZ=y
 CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
@@ -41,6 +39,12 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_LOONGSON1=y
+CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_SCSI=m
 # CONFIG_SCSI_PROC_FS is not set
@@ -48,7 +52,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
@@ -56,7 +59,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_DA=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
@@ -69,18 +71,25 @@ CONFIG_LEGACY_PTY_COUNT=8
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_LOONGSON1=y
 # CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_HID=m
 CONFIG_HID_GENERIC=m
+CONFIG_USB_HID=m
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=m
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_PL2303=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_LOONGSON1=y
 # CONFIG_IOMMU_SUPPORT is not set
@@ -96,15 +105,21 @@ CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_ATIME_SUPPORT=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_ISO8859_1=m
+CONFIG_DYNAMIC_DEBUG=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_FTRACE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_CRYPTO_ECHAINIV is not set
+# CONFIG_CRYPTO_HW is not set

arch/mips/configs/mtx1_defconfig

@@ -51,7 +51,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_IPV6_PRIVACY=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m

arch/mips/configs/nlm_xlp_defconfig

@@ -95,7 +95,6 @@ CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
 CONFIG_TCP_MD5SIG=y
 CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m

arch/mips/configs/nlm_xlr_defconfig

@@ -75,7 +75,6 @@ CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
 CONFIG_TCP_MD5SIG=y
 CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m

arch/mips/configs/rm200_defconfig

@@ -37,7 +37,6 @@ CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m

arch/mips/dec/setup.c

@@ -60,6 +60,7 @@ EXPORT_SYMBOL(dec_kn_slot_size);
 int dec_tc_bus;
 
 DEFINE_SPINLOCK(ioasic_ssr_lock);
+EXPORT_SYMBOL(ioasic_ssr_lock);
 
 volatile u32 *ioasic_base;
 

arch/mips/include/asm/Kbuild

@@ -1,5 +1,6 @@
 # MIPS headers
 generic-(CONFIG_GENERIC_CSUM) += checksum.h
+generic-y += clkdev.h
 generic-y += cputime.h
 generic-y += current.h
 generic-y += dma-contiguous.h

arch/mips/include/asm/asmmacro.h

@@ -235,6 +235,7 @@
 	.macro	ld_b	wd, off, base
 	.set	push
 	.set	mips32r2
+	.set	fp=64
 	.set	msa
 	ld.b	$w\wd, \off(\base)
 	.set	pop
@@ -243,6 +244,7 @@
 	.macro	ld_h	wd, off, base
 	.set	push
 	.set	mips32r2
+	.set	fp=64
 	.set	msa
 	ld.h	$w\wd, \off(\base)
 	.set	pop
@@ -251,6 +253,7 @@
 	.macro	ld_w	wd, off, base
 	.set	push
 	.set	mips32r2
+	.set	fp=64
 	.set	msa
 	ld.w	$w\wd, \off(\base)
 	.set	pop
@@ -268,6 +271,7 @@
 	.macro	st_b	wd, off, base
 	.set	push
 	.set	mips32r2
+	.set	fp=64
 	.set	msa
 	st.b	$w\wd, \off(\base)
 	.set	pop
@@ -276,6 +280,7 @@
 	.macro	st_h	wd, off, base
 	.set	push
 	.set	mips32r2
+	.set	fp=64
 	.set	msa
 	st.h	$w\wd, \off(\base)
 	.set	pop
@@ -284,6 +289,7 @@
 	.macro	st_w	wd, off, base
 	.set	push
 	.set	mips32r2
+	.set	fp=64
 	.set	msa
 	st.w	$w\wd, \off(\base)
 	.set	pop
@@ -298,21 +304,21 @@
 	.set	pop
 	.endm
 
-	.macro	copy_u_w	ws, n
+	.macro	copy_s_w	ws, n
 	.set	push
 	.set	mips32r2
 	.set	fp=64
 	.set	msa
-	copy_u.w $1, $w\ws[\n]
+	copy_s.w $1, $w\ws[\n]
 	.set	pop
 	.endm
 
-	.macro	copy_u_d	ws, n
+	.macro	copy_s_d	ws, n
 	.set	push
 	.set	mips64r2
 	.set	fp=64
 	.set	msa
-	copy_u.d $1, $w\ws[\n]
+	copy_s.d $1, $w\ws[\n]
 	.set	pop
 	.endm
 
@@ -346,8 +352,8 @@
 #define STH_MSA_INSN		0x5800081f
 #define STW_MSA_INSN		0x5800082f
 #define STD_MSA_INSN		0x5800083f
-#define COPY_UW_MSA_INSN	0x58f00056
-#define COPY_UD_MSA_INSN	0x58f80056
+#define COPY_SW_MSA_INSN	0x58b00056
+#define COPY_SD_MSA_INSN	0x58b80056
 #define INSERT_W_MSA_INSN	0x59300816
 #define INSERT_D_MSA_INSN	0x59380816
 #else
@@ -361,8 +367,8 @@
 #define STH_MSA_INSN		0x78000825
 #define STW_MSA_INSN		0x78000826
 #define STD_MSA_INSN		0x78000827
-#define COPY_UW_MSA_INSN	0x78f00059
-#define COPY_UD_MSA_INSN	0x78f80059
+#define COPY_SW_MSA_INSN	0x78b00059
+#define COPY_SD_MSA_INSN	0x78b80059
 #define INSERT_W_MSA_INSN	0x79300819
 #define INSERT_D_MSA_INSN	0x79380819
 #endif
@@ -393,7 +399,7 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	addu	$1, \base, \off
+	PTR_ADDU $1, \base, \off
 	.word	LDB_MSA_INSN | (\wd << 6)
 	.set	pop
 	.endm
@@ -402,7 +408,7 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	addu	$1, \base, \off
+	PTR_ADDU $1, \base, \off
 	.word	LDH_MSA_INSN | (\wd << 6)
 	.set	pop
 	.endm
@@ -411,7 +417,7 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	addu	$1, \base, \off
+	PTR_ADDU $1, \base, \off
 	.word	LDW_MSA_INSN | (\wd << 6)
 	.set	pop
 	.endm
@@ -420,7 +426,7 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	addu	$1, \base, \off
+	PTR_ADDU $1, \base, \off
 	.word	LDD_MSA_INSN | (\wd << 6)
 	.set	pop
 	.endm
@@ -429,7 +435,7 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	addu	$1, \base, \off
+	PTR_ADDU $1, \base, \off
 	.word	STB_MSA_INSN | (\wd << 6)
 	.set	pop
 	.endm
@@ -438,7 +444,7 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	addu	$1, \base, \off
+	PTR_ADDU $1, \base, \off
 	.word	STH_MSA_INSN | (\wd << 6)
 	.set	pop
 	.endm
@@ -447,7 +453,7 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	addu	$1, \base, \off
+	PTR_ADDU $1, \base, \off
 	.word	STW_MSA_INSN | (\wd << 6)
 	.set	pop
 	.endm
@@ -456,26 +462,26 @@
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
-	addu	$1, \base, \off
+	PTR_ADDU $1, \base, \off
 	.word	STD_MSA_INSN | (\wd << 6)
 	.set	pop
 	.endm
 
-	.macro	copy_u_w	ws, n
+	.macro	copy_s_w	ws, n
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
 	.insn
-	.word	COPY_UW_MSA_INSN | (\n << 16) | (\ws << 11)
+	.word	COPY_SW_MSA_INSN | (\n << 16) | (\ws << 11)
 	.set	pop
 	.endm
 
-	.macro	copy_u_d	ws, n
+	.macro	copy_s_d	ws, n
 	.set	push
 	.set	noat
 	SET_HARDFLOAT
 	.insn
-	.word	COPY_UD_MSA_INSN | (\n << 16) | (\ws << 11)
+	.word	COPY_SD_MSA_INSN | (\n << 16) | (\ws << 11)
 	.set	pop
 	.endm
 
@@ -496,41 +502,52 @@
 	.endm
 #endif
 
+#ifdef TOOLCHAIN_SUPPORTS_MSA
+#define FPR_BASE_OFFS	THREAD_FPR0
+#define FPR_BASE	$1
+#else
+#define FPR_BASE_OFFS	0
+#define FPR_BASE	\thread
+#endif
+
 	.macro	msa_save_all	thread
-	st_d	0, THREAD_FPR0, \thread
-	st_d	1, THREAD_FPR1, \thread
-	st_d	2, THREAD_FPR2, \thread
-	st_d	3, THREAD_FPR3, \thread
-	st_d	4, THREAD_FPR4, \thread
-	st_d	5, THREAD_FPR5, \thread
-	st_d	6, THREAD_FPR6, \thread
-	st_d	7, THREAD_FPR7, \thread
-	st_d	8, THREAD_FPR8, \thread
-	st_d	9, THREAD_FPR9, \thread
-	st_d	10, THREAD_FPR10, \thread
-	st_d	11, THREAD_FPR11, \thread
-	st_d	12, THREAD_FPR12, \thread
-	st_d	13, THREAD_FPR13, \thread
-	st_d	14, THREAD_FPR14, \thread
-	st_d	15, THREAD_FPR15, \thread
-	st_d	16, THREAD_FPR16, \thread
-	st_d	17, THREAD_FPR17, \thread
-	st_d	18, THREAD_FPR18, \thread
-	st_d	19, THREAD_FPR19, \thread
-	st_d	20, THREAD_FPR20, \thread
-	st_d	21, THREAD_FPR21, \thread
-	st_d	22, THREAD_FPR22, \thread
-	st_d	23, THREAD_FPR23, \thread
-	st_d	24, THREAD_FPR24, \thread
-	st_d	25, THREAD_FPR25, \thread
-	st_d	26, THREAD_FPR26, \thread
-	st_d	27, THREAD_FPR27, \thread
-	st_d	28, THREAD_FPR28, \thread
-	st_d	29, THREAD_FPR29, \thread
-	st_d	30, THREAD_FPR30, \thread
-	st_d	31, THREAD_FPR31, \thread
 	.set	push
 	.set	noat
+#ifdef TOOLCHAIN_SUPPORTS_MSA
+	PTR_ADDU FPR_BASE, \thread, FPR_BASE_OFFS
+#endif
+	st_d	 0, THREAD_FPR0  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 1, THREAD_FPR1  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 2, THREAD_FPR2  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 3, THREAD_FPR3  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 4, THREAD_FPR4  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 5, THREAD_FPR5  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 6, THREAD_FPR6  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 7, THREAD_FPR7  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 8, THREAD_FPR8  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 9, THREAD_FPR9  - FPR_BASE_OFFS, FPR_BASE
+	st_d	10, THREAD_FPR10 - FPR_BASE_OFFS, FPR_BASE
+	st_d	11, THREAD_FPR11 - FPR_BASE_OFFS, FPR_BASE
+	st_d	12, THREAD_FPR12 - FPR_BASE_OFFS, FPR_BASE
+	st_d	13, THREAD_FPR13 - FPR_BASE_OFFS, FPR_BASE
+	st_d	14, THREAD_FPR14 - FPR_BASE_OFFS, FPR_BASE
+	st_d	15, THREAD_FPR15 - FPR_BASE_OFFS, FPR_BASE
+	st_d	16, THREAD_FPR16 - FPR_BASE_OFFS, FPR_BASE
+	st_d	17, THREAD_FPR17 - FPR_BASE_OFFS, FPR_BASE
+	st_d	18, THREAD_FPR18 - FPR_BASE_OFFS, FPR_BASE
+	st_d	19, THREAD_FPR19 - FPR_BASE_OFFS, FPR_BASE
+	st_d	20, THREAD_FPR20 - FPR_BASE_OFFS, FPR_BASE
+	st_d	21, THREAD_FPR21 - FPR_BASE_OFFS, FPR_BASE
+	st_d	22, THREAD_FPR22 - FPR_BASE_OFFS, FPR_BASE
+	st_d	23, THREAD_FPR23 - FPR_BASE_OFFS, FPR_BASE
+	st_d	24, THREAD_FPR24 - FPR_BASE_OFFS, FPR_BASE
+	st_d	25, THREAD_FPR25 - FPR_BASE_OFFS, FPR_BASE
+	st_d	26, THREAD_FPR26 - FPR_BASE_OFFS, FPR_BASE
+	st_d	27, THREAD_FPR27 - FPR_BASE_OFFS, FPR_BASE
+	st_d	28, THREAD_FPR28 - FPR_BASE_OFFS, FPR_BASE
+	st_d	29, THREAD_FPR29 - FPR_BASE_OFFS, FPR_BASE
+	st_d	30, THREAD_FPR30 - FPR_BASE_OFFS, FPR_BASE
+	st_d	31, THREAD_FPR31 - FPR_BASE_OFFS, FPR_BASE
 	SET_HARDFLOAT
 	_cfcmsa	$1, MSA_CSR
 	sw	$1, THREAD_MSA_CSR(\thread)
@@ -543,40 +560,46 @@
 	SET_HARDFLOAT
 	lw	$1, THREAD_MSA_CSR(\thread)
 	_ctcmsa	MSA_CSR, $1
-	.set	pop
-	ld_d	0, THREAD_FPR0, \thread
-	ld_d	1, THREAD_FPR1, \thread
-	ld_d	2, THREAD_FPR2, \thread
-	ld_d	3, THREAD_FPR3, \thread
-	ld_d	4, THREAD_FPR4, \thread
-	ld_d	5, THREAD_FPR5, \thread
-	ld_d	6, THREAD_FPR6, \thread
-	ld_d	7, THREAD_FPR7, \thread
-	ld_d	8, THREAD_FPR8, \thread
-	ld_d	9, THREAD_FPR9, \thread
-	ld_d	10, THREAD_FPR10, \thread
-	ld_d	11, THREAD_FPR11, \thread
-	ld_d	12, THREAD_FPR12, \thread
-	ld_d	13, THREAD_FPR13, \thread
-	ld_d	14, THREAD_FPR14, \thread
-	ld_d	15, THREAD_FPR15, \thread
-	ld_d	16, THREAD_FPR16, \thread
-	ld_d	17, THREAD_FPR17, \thread
-	ld_d	18, THREAD_FPR18, \thread
-	ld_d	19, THREAD_FPR19, \thread
-	ld_d	20, THREAD_FPR20, \thread
-	ld_d	21, THREAD_FPR21, \thread
-	ld_d	22, THREAD_FPR22, \thread
-	ld_d	23, THREAD_FPR23, \thread
-	ld_d	24, THREAD_FPR24, \thread
-	ld_d	25, THREAD_FPR25, \thread
-	ld_d	26, THREAD_FPR26, \thread
-	ld_d	27, THREAD_FPR27, \thread
-	ld_d	28, THREAD_FPR28, \thread
-	ld_d	29, THREAD_FPR29, \thread
-	ld_d	30, THREAD_FPR30, \thread
-	ld_d	31, THREAD_FPR31, \thread
-	.endm
+#ifdef TOOLCHAIN_SUPPORTS_MSA
+	PTR_ADDU FPR_BASE, \thread, FPR_BASE_OFFS
+#endif
+	ld_d	 0, THREAD_FPR0  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 1, THREAD_FPR1  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 2, THREAD_FPR2  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 3, THREAD_FPR3  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 4, THREAD_FPR4  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 5, THREAD_FPR5  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 6, THREAD_FPR6  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 7, THREAD_FPR7  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 8, THREAD_FPR8  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 9, THREAD_FPR9  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	10, THREAD_FPR10 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	11, THREAD_FPR11 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	12, THREAD_FPR12 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	13, THREAD_FPR13 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	14, THREAD_FPR14 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	15, THREAD_FPR15 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	16, THREAD_FPR16 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	17, THREAD_FPR17 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	18, THREAD_FPR18 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	19, THREAD_FPR19 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	20, THREAD_FPR20 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	21, THREAD_FPR21 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	22, THREAD_FPR22 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	23, THREAD_FPR23 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	24, THREAD_FPR24 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	25, THREAD_FPR25 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	26, THREAD_FPR26 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	27, THREAD_FPR27 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	28, THREAD_FPR28 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	29, THREAD_FPR29 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	30, THREAD_FPR30 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	31, THREAD_FPR31 - FPR_BASE_OFFS, FPR_BASE
+	.set pop
+	.endm
+
+#undef FPR_BASE_OFFS
+#undef FPR_BASE
 
 	.macro	msa_init_upper wd
 #ifdef CONFIG_64BIT

arch/mips/include/asm/bitops.h

@@ -19,25 +19,10 @@
 #include <asm/byteorder.h>		/* sigh ... */
 #include <asm/compiler.h>
 #include <asm/cpu-features.h>
+#include <asm/llsc.h>
 #include <asm/sgidefs.h>
 #include <asm/war.h>
 
-#if _MIPS_SZLONG == 32
-#define SZLONG_LOG 5
-#define SZLONG_MASK 31UL
-#define __LL		"ll	"
-#define __SC		"sc	"
-#define __INS		"ins	"
-#define __EXT		"ext	"
-#elif _MIPS_SZLONG == 64
-#define SZLONG_LOG 6
-#define SZLONG_MASK 63UL
-#define __LL		"lld	"
-#define __SC		"scd	"
-#define __INS		"dins	 "
-#define __EXT		"dext	 "
-#endif
-
 /*
  * These are the "slower" versions of the functions and are in bitops.c.
  * These functions call raw_local_irq_{save,restore}().

arch/mips/include/asm/bitrev.h

@@ -0,0 +1,30 @@
+#ifndef __MIPS_ASM_BITREV_H__
+#define __MIPS_ASM_BITREV_H__
+
+#include <linux/swab.h>
+
+static __always_inline __attribute_const__ u32 __arch_bitrev32(u32 x)
+{
+	u32 ret;
+
+	asm("bitswap	%0, %1" : "=r"(ret) : "r"(__swab32(x)));
+	return ret;
+}
+
+static __always_inline __attribute_const__ u16 __arch_bitrev16(u16 x)
+{
+	u16 ret;
+
+	asm("bitswap	%0, %1" : "=r"(ret) : "r"(__swab16(x)));
+	return ret;
+}
+
+static __always_inline __attribute_const__ u8 __arch_bitrev8(u8 x)
+{
+	u8 ret;
+
+	asm("bitswap	%0, %1" : "=r"(ret) : "r"(x));
+	return ret;
+}
+
+#endif /* __MIPS_ASM_BITREV_H__ */

arch/mips/include/asm/bmips.h

@@ -88,6 +88,7 @@ extern unsigned long bmips_tp1_irqs;
 
 extern void bmips_ebase_setup(void);
 extern asmlinkage void plat_wired_tlb_setup(void);
+extern void bmips_cpu_setup(void);
 
 static inline unsigned long bmips_read_zscm_reg(unsigned int offset)
 {

arch/mips/include/asm/bootinfo.h

@@ -144,4 +144,22 @@ static inline void plat_swiotlb_setup(void) {}
 
 #endif /* CONFIG_SWIOTLB */
 
+#ifdef CONFIG_USE_OF
+/**
+ * plat_get_fdt() - Return a pointer to the platform's device tree blob
+ *
+ * This function provides a platform independent API to get a pointer to the
+ * flattened device tree blob. The interface between bootloader and kernel
+ * is not consistent across platforms so it is necessary to provide this
+ * API such that common startup code can locate the FDT.
+ *
+ * This is used by the KASLR code to get command line arguments and random
+ * seed from the device tree. Any platform wishing to use KASLR should
+ * provide this API and select SYS_SUPPORTS_RELOCATABLE.
+ *
+ * Return: Pointer to the flattened device tree blob.
+ */
+extern void *plat_get_fdt(void);
+#endif /* CONFIG_USE_OF */
+
 #endif /* _ASM_BOOTINFO_H */

arch/mips/include/asm/cacheflush.h

@@ -51,7 +51,6 @@ extern void (*flush_cache_range)(struct vm_area_struct *vma,
 	unsigned long start, unsigned long end);
 extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
 extern void __flush_dcache_page(struct page *page);
-extern void __flush_icache_page(struct vm_area_struct *vma, struct page *page);
 
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 static inline void flush_dcache_page(struct page *page)
@@ -77,11 +76,6 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 static inline void flush_icache_page(struct vm_area_struct *vma,
 	struct page *page)
 {
-	if (!cpu_has_ic_fills_f_dc && (vma->vm_flags & VM_EXEC) &&
-	    Page_dcache_dirty(page)) {
-		__flush_icache_page(vma, page);
-		ClearPageDcacheDirty(page);
-	}
 }
 
 extern void (*flush_icache_range)(unsigned long start, unsigned long end);
@@ -132,6 +126,7 @@ static inline void kunmap_noncoherent(void)
 static inline void flush_kernel_dcache_page(struct page *page)
 {
 	BUG_ON(cpu_has_dc_aliases && PageHighMem(page));
+	flush_dcache_page(page);
 }
 
 /*

arch/mips/include/asm/cacheops.h

@@ -21,6 +21,7 @@
 #define Cache_I				0x00
 #define Cache_D				0x01
 #define Cache_T				0x02
+#define Cache_V				0x02 /* Loongson-3 */
 #define Cache_S				0x03
 
 #define Index_Writeback_Inv		0x00
@@ -107,4 +108,9 @@
  */
 #define Hit_Invalidate_I_Loongson2	(Cache_I | 0x00)
 
+/*
+ * Loongson3-specific cacheops
+ */
+#define Index_Writeback_Inv_V		(Cache_V | Index_Writeback_Inv)
+
 #endif	/* __ASM_CACHEOPS_H */

arch/mips/include/asm/clkdev.h

@@ -1,27 +0,0 @@
-/*
- *  based on arch/arm/include/asm/clkdev.h
- *
- *  Copyright (C) 2008 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Helper for the clk API to assist looking up a struct clk.
- */
-#ifndef __ASM_CLKDEV_H
-#define __ASM_CLKDEV_H
-
-#include <linux/slab.h>
-
-#ifndef CONFIG_COMMON_CLK
-#define __clk_get(clk)	({ 1; })
-#define __clk_put(clk)	do { } while (0)
-#endif
-
-static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
-{
-	return kzalloc(size, GFP_KERNEL);
-}
-
-#endif

arch/mips/include/asm/cpu-features.h

@@ -35,6 +35,9 @@
 #ifndef cpu_has_htw
 #define cpu_has_htw		(cpu_data[0].options & MIPS_CPU_HTW)
 #endif
+#ifndef cpu_has_ldpte
+#define cpu_has_ldpte		(cpu_data[0].options & MIPS_CPU_LDPTE)
+#endif
 #ifndef cpu_has_rixiex
 #define cpu_has_rixiex		(cpu_data[0].options & MIPS_CPU_RIXIEX)
 #endif
@@ -117,6 +120,21 @@
 #ifndef kernel_uses_llsc
 #define kernel_uses_llsc	cpu_has_llsc
 #endif
+#ifndef cpu_has_guestctl0ext
+#define cpu_has_guestctl0ext	(cpu_data[0].options & MIPS_CPU_GUESTCTL0EXT)
+#endif
+#ifndef cpu_has_guestctl1
+#define cpu_has_guestctl1	(cpu_data[0].options & MIPS_CPU_GUESTCTL1)
+#endif
+#ifndef cpu_has_guestctl2
+#define cpu_has_guestctl2	(cpu_data[0].options & MIPS_CPU_GUESTCTL2)
+#endif
+#ifndef cpu_has_guestid
+#define cpu_has_guestid		(cpu_data[0].options & MIPS_CPU_GUESTID)
+#endif
+#ifndef cpu_has_drg
+#define cpu_has_drg		(cpu_data[0].options & MIPS_CPU_DRG)
+#endif
 #ifndef cpu_has_mips16
 #define cpu_has_mips16		(cpu_data[0].ases & MIPS_ASE_MIPS16)
 #endif
@@ -142,8 +160,14 @@
 # endif
 #endif
 
+#ifndef cpu_has_lpa
+#define cpu_has_lpa		(cpu_data[0].options & MIPS_CPU_LPA)
+#endif
+#ifndef cpu_has_mvh
+#define cpu_has_mvh		(cpu_data[0].options & MIPS_CPU_MVH)
+#endif
 #ifndef cpu_has_xpa
-#define cpu_has_xpa		(cpu_data[0].options & MIPS_CPU_XPA)
+#define cpu_has_xpa		(cpu_has_lpa && cpu_has_mvh)
 #endif
 #ifndef cpu_has_vtag_icache
 #define cpu_has_vtag_icache	(cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
@@ -307,10 +331,18 @@
 #define cpu_has_dsp2		(cpu_data[0].ases & MIPS_ASE_DSP2P)
 #endif
 
+#ifndef cpu_has_dsp3
+#define cpu_has_dsp3		(cpu_data[0].ases & MIPS_ASE_DSP3)
+#endif
+
 #ifndef cpu_has_mipsmt
 #define cpu_has_mipsmt		(cpu_data[0].ases & MIPS_ASE_MIPSMT)
 #endif
 
+#ifndef cpu_has_vp
+#define cpu_has_vp		(cpu_data[0].options & MIPS_CPU_VP)
+#endif
+
 #ifndef cpu_has_userlocal
 #define cpu_has_userlocal	(cpu_data[0].options & MIPS_CPU_ULRI)
 #endif
@@ -421,4 +453,107 @@
 #define cpu_has_nan_2008	(cpu_data[0].options & MIPS_CPU_NAN_2008)
 #endif
 
+#ifndef cpu_has_ebase_wg
+# define cpu_has_ebase_wg	(cpu_data[0].options & MIPS_CPU_EBASE_WG)
+#endif
+
+#ifndef cpu_has_badinstr
+# define cpu_has_badinstr	(cpu_data[0].options & MIPS_CPU_BADINSTR)
+#endif
+
+#ifndef cpu_has_badinstrp
+# define cpu_has_badinstrp	(cpu_data[0].options & MIPS_CPU_BADINSTRP)
+#endif
+
+#ifndef cpu_has_contextconfig
+# define cpu_has_contextconfig	(cpu_data[0].options & MIPS_CPU_CTXTC)
+#endif
+
+#ifndef cpu_has_perf
+# define cpu_has_perf		(cpu_data[0].options & MIPS_CPU_PERF)
+#endif
+
+/*
+ * Guest capabilities
+ */
+#ifndef cpu_guest_has_conf1
+#define cpu_guest_has_conf1	(cpu_data[0].guest.conf & (1 << 1))
+#endif
+#ifndef cpu_guest_has_conf2
+#define cpu_guest_has_conf2	(cpu_data[0].guest.conf & (1 << 2))
+#endif
+#ifndef cpu_guest_has_conf3
+#define cpu_guest_has_conf3	(cpu_data[0].guest.conf & (1 << 3))
+#endif
+#ifndef cpu_guest_has_conf4
+#define cpu_guest_has_conf4	(cpu_data[0].guest.conf & (1 << 4))
+#endif
+#ifndef cpu_guest_has_conf5
+#define cpu_guest_has_conf5	(cpu_data[0].guest.conf & (1 << 5))
+#endif
+#ifndef cpu_guest_has_conf6
+#define cpu_guest_has_conf6	(cpu_data[0].guest.conf & (1 << 6))
+#endif
+#ifndef cpu_guest_has_conf7
+#define cpu_guest_has_conf7	(cpu_data[0].guest.conf & (1 << 7))
+#endif
+#ifndef cpu_guest_has_fpu
+#define cpu_guest_has_fpu	(cpu_data[0].guest.options & MIPS_CPU_FPU)
+#endif
+#ifndef cpu_guest_has_watch
+#define cpu_guest_has_watch	(cpu_data[0].guest.options & MIPS_CPU_WATCH)
+#endif
+#ifndef cpu_guest_has_contextconfig
+#define cpu_guest_has_contextconfig (cpu_data[0].guest.options & MIPS_CPU_CTXTC)
+#endif
+#ifndef cpu_guest_has_segments
+#define cpu_guest_has_segments	(cpu_data[0].guest.options & MIPS_CPU_SEGMENTS)
+#endif
+#ifndef cpu_guest_has_badinstr
+#define cpu_guest_has_badinstr	(cpu_data[0].guest.options & MIPS_CPU_BADINSTR)
+#endif
+#ifndef cpu_guest_has_badinstrp
+#define cpu_guest_has_badinstrp	(cpu_data[0].guest.options & MIPS_CPU_BADINSTRP)
+#endif
+#ifndef cpu_guest_has_htw
+#define cpu_guest_has_htw	(cpu_data[0].guest.options & MIPS_CPU_HTW)
+#endif
+#ifndef cpu_guest_has_msa
+#define cpu_guest_has_msa	(cpu_data[0].guest.ases & MIPS_ASE_MSA)
+#endif
+#ifndef cpu_guest_has_kscr
+#define cpu_guest_has_kscr(n)	(cpu_data[0].guest.kscratch_mask & (1u << (n)))
+#endif
+#ifndef cpu_guest_has_rw_llb
+#define cpu_guest_has_rw_llb	(cpu_has_mips_r6 || (cpu_data[0].guest.options & MIPS_CPU_RW_LLB))
+#endif
+#ifndef cpu_guest_has_perf
+#define cpu_guest_has_perf	(cpu_data[0].guest.options & MIPS_CPU_PERF)
+#endif
+#ifndef cpu_guest_has_maar
+#define cpu_guest_has_maar	(cpu_data[0].guest.options & MIPS_CPU_MAAR)
+#endif
+
+/*
+ * Guest dynamic capabilities
+ */
+#ifndef cpu_guest_has_dyn_fpu
+#define cpu_guest_has_dyn_fpu	(cpu_data[0].guest.options_dyn & MIPS_CPU_FPU)
+#endif
+#ifndef cpu_guest_has_dyn_watch
+#define cpu_guest_has_dyn_watch	(cpu_data[0].guest.options_dyn & MIPS_CPU_WATCH)
+#endif
+#ifndef cpu_guest_has_dyn_contextconfig
+#define cpu_guest_has_dyn_contextconfig (cpu_data[0].guest.options_dyn & MIPS_CPU_CTXTC)
+#endif
+#ifndef cpu_guest_has_dyn_perf
+#define cpu_guest_has_dyn_perf	(cpu_data[0].guest.options_dyn & MIPS_CPU_PERF)
+#endif
+#ifndef cpu_guest_has_dyn_msa
+#define cpu_guest_has_dyn_msa	(cpu_data[0].guest.ases_dyn & MIPS_ASE_MSA)
+#endif
+#ifndef cpu_guest_has_dyn_maar
+#define cpu_guest_has_dyn_maar	(cpu_data[0].guest.options_dyn & MIPS_CPU_MAAR)
+#endif
+
 #endif /* __ASM_CPU_FEATURES_H */

arch/mips/include/asm/cpu-info.h

@@ -28,6 +28,15 @@ struct cache_desc {
 	unsigned char flags;	/* Flags describing cache properties */
 };
 
+struct guest_info {
+	unsigned long		ases;
+	unsigned long		ases_dyn;
+	unsigned long long	options;
+	unsigned long long	options_dyn;
+	u8			conf;
+	u8			kscratch_mask;
+};
+
 /*
  * Flag definitions
  */
@@ -40,6 +49,9 @@ struct cache_desc {
 
 struct cpuinfo_mips {
 	unsigned long		asid_cache;
+#ifdef CONFIG_MIPS_ASID_BITS_VARIABLE
+	unsigned long		asid_mask;
+#endif
 
 	/*
 	 * Capability and feature descriptor structure for MIPS CPU
@@ -60,6 +72,7 @@ struct cpuinfo_mips {
 	int			tlbsizeftlbways;
 	struct cache_desc	icache; /* Primary I-cache */
 	struct cache_desc	dcache; /* Primary D or combined I/D cache */
+	struct cache_desc	vcache; /* Victim cache, between pcache and scache */
 	struct cache_desc	scache; /* Secondary cache */
 	struct cache_desc	tcache; /* Tertiary/split secondary cache */
 	int			srsets; /* Shadow register sets */
@@ -68,7 +81,7 @@ struct cpuinfo_mips {
 #ifdef CONFIG_64BIT
 	int			vmbits; /* Virtual memory size in bits */
 #endif
-#ifdef CONFIG_MIPS_MT_SMP
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_CPU_MIPSR6)
 	/*
 	 * There is not necessarily a 1:1 mapping of VPE num to CPU number
 	 * in particular on multi-core systems.
@@ -91,6 +104,11 @@ struct cpuinfo_mips {
 	 * htw_start/htw_stop calls
 	 */
 	unsigned int		htw_seq;
+
+	/* VZ & Guest features */
+	struct guest_info	guest;
+	unsigned int		gtoffset_mask;
+	unsigned int		guestid_mask;
 } __attribute__((aligned(SMP_CACHE_BYTES)));
 
 extern struct cpuinfo_mips cpu_data[];
@@ -125,10 +143,31 @@ struct proc_cpuinfo_notifier_args {
 	unsigned long n;
 };
 
-#ifdef CONFIG_MIPS_MT_SMP
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_CPU_MIPSR6)
 # define cpu_vpe_id(cpuinfo)	((cpuinfo)->vpe_id)
 #else
 # define cpu_vpe_id(cpuinfo)	({ (void)cpuinfo; 0; })
 #endif
 
+static inline unsigned long cpu_asid_inc(void)
+{
+	return 1 << CONFIG_MIPS_ASID_SHIFT;
+}
+
+static inline unsigned long cpu_asid_mask(struct cpuinfo_mips *cpuinfo)
+{
+#ifdef CONFIG_MIPS_ASID_BITS_VARIABLE
+	return cpuinfo->asid_mask;
+#endif
+	return ((1 << CONFIG_MIPS_ASID_BITS) - 1) << CONFIG_MIPS_ASID_SHIFT;
+}
+
+static inline void set_cpu_asid_mask(struct cpuinfo_mips *cpuinfo,
+				     unsigned long asid_mask)
+{
+#ifdef CONFIG_MIPS_ASID_BITS_VARIABLE
+	cpuinfo->asid_mask = asid_mask;
+#endif
+}
+
 #endif /* __ASM_CPU_INFO_H */