| .. |
|
Kconfig
|
2c93e790e8
usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HW
|
%!s(int64=8) %!d(string=hai) anos |
|
Makefile
|
7bb7e9b1a4
usb: chipidea: Add support for ULPI PHY bus
|
%!s(int64=8) %!d(string=hai) anos |
|
bits.h
|
96625eadca
usb: chipidea: add tx/rx burst size configuration interface
|
%!s(int64=10) %!d(string=hai) anos |
|
ci.h
|
4f4555cfe7
usb: chipidea: udc: update gadget state after bus resume
|
%!s(int64=8) %!d(string=hai) anos |
|
ci_hdrc_imx.c
|
d13631bb15
usb: chipidea: imx: configure imx for ULPI phy
|
%!s(int64=8) %!d(string=hai) anos |
|
ci_hdrc_imx.h
|
d13631bb15
usb: chipidea: imx: configure imx for ULPI phy
|
%!s(int64=8) %!d(string=hai) anos |
|
ci_hdrc_msm.c
|
753dfd2361
usb: chipidea: msm: Fix return value check in ci_hdrc_msm_probe()
|
%!s(int64=8) %!d(string=hai) anos |
|
ci_hdrc_pci.c
|
8c0614ca31
usb: chipidea: fix return value check in ci_hdrc_pci_probe()
|
%!s(int64=9) %!d(string=hai) anos |
|
ci_hdrc_usb2.c
|
30a9566a4f
usb: chipidea: usb2: delete the redundant setting default DMA mask code
|
%!s(int64=8) %!d(string=hai) anos |
|
ci_hdrc_zevio.c
|
89200448a0
Chipidea: TI-NSPIRE USB OTG hardware does not support high speed and must connect at full speed
|
%!s(int64=10) %!d(string=hai) anos |
|
core.c
|
ac9d947683
Merge tag 'usb-ci-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next
|
%!s(int64=8) %!d(string=hai) anos |
|
debug.c
|
3c724888d2
chipidea: error on overflow for port_test_write
|
%!s(int64=9) %!d(string=hai) anos |
|
host.c
|
aeb78cda51
usb: chipidea: use bus->sysdev for DMA configuration
|
%!s(int64=8) %!d(string=hai) anos |
|
host.h
|
2f01a33bd2
usb: chipidea: ehci_init_driver is intended to call one time
|
%!s(int64=10) %!d(string=hai) anos |
|
otg.c
|
c3b674a04b
usb: chipidea: vbus event may exist before starting gadget
|
%!s(int64=8) %!d(string=hai) anos |
|
otg.h
|
be6b0c1bd0
usb: chipidea: using one inline function to cover queue work operations
|
%!s(int64=11) %!d(string=hai) anos |
|
otg_fsm.c
|
2456e85535
ktime: Get rid of the union
|
%!s(int64=8) %!d(string=hai) anos |
|
otg_fsm.h
|
4a75754751
usb: chipidea: otg: add A idle to B disconnect timer
|
%!s(int64=9) %!d(string=hai) anos |
|
udc.c
|
ac9d947683
Merge tag 'usb-ci-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next
|
%!s(int64=8) %!d(string=hai) anos |
|
udc.h
|
34445fb433
usb: chipidea: Properly mark little endian descriptors
|
%!s(int64=8) %!d(string=hai) anos |
|
ulpi.c
|
7bb7e9b1a4
usb: chipidea: Add support for ULPI PHY bus
|
%!s(int64=8) %!d(string=hai) anos |
|
usbmisc_imx.c
|
3be3251db0
usb: chipidea: imx: Disable internal 60Mhz clock with ULPI PHY
|
%!s(int64=8) %!d(string=hai) anos |
Greg Kroah-Hartman
ac9d947683
Merge tag 'usb-ci-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next