Merge tag 'regulator-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Quite a lot of work going on the core this release, mainly around
  system initialization, but a quiet release for drivers:

   - fixes for registration of multiple regulators on a PMIC from Javier
     Martinez Canillas and Jon Hunter.

   - cleanups to the regulator_get() code from Dmitry Torokhov

   - lots of constifcation of structs from Bhumika Goyal

   - support for Motorola CPCAP regulators from Tony Lindgren"

* tag 'regulator-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
  regulator: core: Resolve supplies before disabling unused regulators
  regulator: Fix regulator_summary for deviceless consumers
  regulator: tps65086: Fix DT node referencing in of_parse_cb
  regulator: tps65086: Fix expected switch DT node names
  regulator: core: simplify _regulator_get()
  regulator: core: have regulator_dev_lookup() return ERR_PTR-encoded errors
  regulator: gpio: correct default type
  regulator: cpcap: Add basic regulator support
  regulator: core: fix typo in regulator_bulk_disable()
  regulator: core: optimize devm_regulator_bulk_get()
  regulator: core: simplify regulator_bulk_force_disable()
  regulator: core: have _regulator_get() accept get_type argument
  regulator: core: remove dead code in _regulator_get()
  regulator: rn5t618: constify regulator_ops structure
  regulator: rc5t583-regulator: constify regulator_ops structure
  regulator: pv88090-regulator: constify regulator_ops structure
  regulator: pv88080-regulator: constify regulator_ops structure
  regulator: pv88060-regulator: constify regulator_ops structure
  regulator: pfuze100-regulator: constify regulator_ops structure
  regulator: pcf50633-regulator: constify regulator_ops structure
  ...

Documentation/devicetree/bindings/regulator/anatop-regulator.txt

@@ -14,6 +14,7 @@ Optional properties:
 - anatop-delay-bit-shift: Bit shift for the step time register
 - anatop-delay-bit-width: Number of bits used in the step time register
 - vin-supply: The supply for this regulator
+- anatop-enable-bit: Regulator enable bit offset
 
 Any property defined as part of the core regulator
 binding, defined in regulator.txt, can also be used.

Documentation/devicetree/bindings/regulator/cpcap-regulator.txt

@@ -0,0 +1,34 @@
+Motorola CPCAP PMIC voltage regulators
+------------------------------------
+
+Requires node properties:
+- "compatible" value one of:
+    "motorola,cpcap-regulator"
+    "motorola,mapphone-cpcap-regulator"
+
+Required regulator properties:
+- "regulator-name"
+- "regulator-enable-ramp-delay"
+- "regulator-min-microvolt"
+- "regulator-max-microvolt"
+
+Optional regulator properties:
+- "regulator-boot-on"
+
+See Documentation/devicetree/bindings/regulator/regulator.txt
+for more details about the regulator properties.
+
+Example:
+
+cpcap_regulator: regulator {
+	compatible = "motorola,cpcap-regulator";
+
+	cpcap_regulators: regulators {
+		sw5: SW5 {
+			regulator-min-microvolt = <5050000>;
+			regulator-max-microvolt = <5050000>;
+			regulator-enable-ramp-delay = <50000>;
+			regulator-boot-on;
+		};
+	};
+};

Documentation/devicetree/bindings/regulator/gpio-regulator.txt

@@ -13,7 +13,7 @@ Optional properties:
 - startup-delay-us	: Startup time in microseconds.
 - enable-active-high	: Polarity of GPIO is active high (default is low).
 - regulator-type	: Specifies what is being regulated, must be either
-			  "voltage" or "current", defaults to current.
+			  "voltage" or "current", defaults to voltage.
 
 Any property defined as part of the core regulator binding defined in
 regulator.txt can also be used.

Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt

@@ -22,6 +22,7 @@ Regulator nodes are identified by their compatible:
 		    "qcom,rpm-pm8841-regulators"
 		    "qcom,rpm-pm8916-regulators"
 		    "qcom,rpm-pm8941-regulators"
+		    "qcom,rpm-pm8994-regulators"
 		    "qcom,rpm-pma8084-regulators"
 
 - vdd_s1-supply:
@@ -68,6 +69,56 @@ Regulator nodes are identified by their compatible:
 	Definition: reference to regulator supplying the input pin, as
 		    described in the data sheet
 
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_s7-supply:
+- vdd_s8-supply:
+- vdd_s9-supply:
+- vdd_s10-supply:
+- vdd_s11-supply:
+- vdd_s12-supply:
+- vdd_l1-supply:
+- vdd_l2_l26_l28-supply:
+- vdd_l3_l11-supply:
+- vdd_l4_l27_l31-supply:
+- vdd_l5_l7-supply:
+- vdd_l6_l12_l32-supply:
+- vdd_l5_l7-supply:
+- vdd_l8_l16_l30-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l3_l11-supply:
+- vdd_l6_l12_l32-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l14_l15-supply:
+- vdd_l14_l15-supply:
+- vdd_l8_l16_l30-supply:
+- vdd_l17_l29-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l20_l21-supply:
+- vdd_l20_l21-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l25-supply:
+- vdd_l2_l26_l28-supply:
+- vdd_l4_l27_l31-supply:
+- vdd_l2_l26_l28-supply:
+- vdd_l17_l29-supply:
+- vdd_l8_l16_l30-supply:
+- vdd_l4_l27_l31-supply:
+- vdd_l6_l12_l32-supply:
+- vdd_lvs1_2-supply:
+	Usage: optional (pm8994 only)
+	Value type: <phandle>
+	Definition: reference to regulator supplying the input pin, as
+		    described in the data sheet
+
 - vdd_s1-supply:
 - vdd_s2-supply:
 - vdd_s3-supply:
@@ -113,6 +164,11 @@ pm8941:
 	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
 	lvs3, 5vs1, 5vs2
 
+pm8994:
+	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
+	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
+	l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
+
 pma8084:
 	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
 	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,

drivers/regulator/88pm800.c

@@ -180,7 +180,7 @@ static int pm800_get_current_limit(struct regulator_dev *rdev)
 	return info->max_ua;
 }
 
-static struct regulator_ops pm800_volt_range_ops = {
+static const struct regulator_ops pm800_volt_range_ops = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
@@ -191,7 +191,7 @@ static struct regulator_ops pm800_volt_range_ops = {
 	.get_current_limit	= pm800_get_current_limit,
 };
 
-static struct regulator_ops pm800_volt_table_ops = {
+static const struct regulator_ops pm800_volt_table_ops = {
 	.list_voltage		= regulator_list_voltage_table,
 	.map_voltage		= regulator_map_voltage_iterate,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,

drivers/regulator/88pm8607.c

@@ -220,7 +220,7 @@ static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
 	return ret;
 }
 
-static struct regulator_ops pm8607_regulator_ops = {
+static const struct regulator_ops pm8607_regulator_ops = {
 	.list_voltage	= pm8607_list_voltage,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -229,7 +229,7 @@ static struct regulator_ops pm8607_regulator_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 };
 
-static struct regulator_ops pm8606_preg_ops = {
+static const struct regulator_ops pm8606_preg_ops = {
 	.enable		= regulator_enable_regmap,
 	.disable	= regulator_disable_regmap,
 	.is_enabled	= regulator_is_enabled_regmap,

drivers/regulator/Kconfig

@@ -163,6 +163,13 @@ config REGULATOR_BCM590XX
 	  BCM590xx PMUs. This will enable support for the software
 	  controllable LDO/Switching regulators.
 
+config REGULATOR_CPCAP
+	tristate "Motorola CPCAP regulator"
+	depends on MFD_CPCAP
+	help
+	  Say y here for CPCAP regulator found on some Motorola phones
+	  and tablets such as Droid 4.
+
 config REGULATOR_DA903X
 	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 	depends on PMIC_DA903X

drivers/regulator/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 
 obj-$(CONFIG_REGULATOR_88PM800) += 88pm800.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
+obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
 obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
 obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500-ext.o ab8500.o

drivers/regulator/aat2870-regulator.c

@@ -97,7 +97,7 @@ static int aat2870_ldo_is_enabled(struct regulator_dev *rdev)
 	return val & ri->enable_mask ? 1 : 0;
 }
 
-static struct regulator_ops aat2870_ldo_ops = {
+static const struct regulator_ops aat2870_ldo_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_ascend,
 	.set_voltage_sel = aat2870_ldo_set_voltage_sel,

drivers/regulator/act8945a-regulator.c

@@ -69,7 +69,7 @@ static const struct regulator_linear_range act8945a_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
 };
 
-static struct regulator_ops act8945a_ops = {
+static const struct regulator_ops act8945a_ops = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,

drivers/regulator/ad5398.c

@@ -181,7 +181,7 @@ static int ad5398_disable(struct regulator_dev *rdev)
 	return ret;
 }
 
-static struct regulator_ops ad5398_ops = {
+static const struct regulator_ops ad5398_ops = {
 	.get_current_limit = ad5398_get_current_limit,
 	.set_current_limit = ad5398_set_current_limit,
 	.enable = ad5398_enable,

drivers/regulator/anatop-regulator.c

@@ -301,7 +301,19 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 			return -EINVAL;
 		}
 	} else {
+		u32 enable_bit;
+
 		rdesc->ops = &anatop_rops;
+
+		if (!of_property_read_u32(np, "anatop-enable-bit",
+					  &enable_bit)) {
+			anatop_rops.enable  = regulator_enable_regmap;
+			anatop_rops.disable = regulator_disable_regmap;
+			anatop_rops.is_enabled = regulator_is_enabled_regmap;
+
+			rdesc->enable_reg = sreg->control_reg;
+			rdesc->enable_mask = BIT(enable_bit);
+		}
 	}
 
 	/* register regulator */

drivers/regulator/arizona-ldo1.c

@@ -109,7 +109,7 @@ static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
 	return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT;
 }
 
-static struct regulator_ops arizona_ldo1_hc_ops = {
+static const struct regulator_ops arizona_ldo1_hc_ops = {
 	.list_voltage = arizona_ldo1_hc_list_voltage,
 	.map_voltage = arizona_ldo1_hc_map_voltage,
 	.get_voltage_sel = arizona_ldo1_hc_get_voltage_sel,
@@ -135,7 +135,7 @@ static const struct regulator_desc arizona_ldo1_hc = {
 	.owner = THIS_MODULE,
 };
 
-static struct regulator_ops arizona_ldo1_ops = {
+static const struct regulator_ops arizona_ldo1_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.map_voltage = regulator_map_voltage_linear,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,

drivers/regulator/arizona-micsupp.c

@@ -45,6 +45,7 @@ static void arizona_micsupp_check_cp(struct work_struct *work)
 	struct arizona_micsupp *micsupp =
 		container_of(work, struct arizona_micsupp, check_cp_work);
 	struct snd_soc_dapm_context *dapm = micsupp->arizona->dapm;
+	struct snd_soc_component *component = snd_soc_dapm_to_component(dapm);
 	struct arizona *arizona = micsupp->arizona;
 	struct regmap *regmap = arizona->regmap;
 	unsigned int reg;
@@ -59,9 +60,10 @@ static void arizona_micsupp_check_cp(struct work_struct *work)
 	if (dapm) {
 		if ((reg & (ARIZONA_CPMIC_ENA | ARIZONA_CPMIC_BYPASS)) ==
 		    ARIZONA_CPMIC_ENA)
-			snd_soc_dapm_force_enable_pin(dapm, "MICSUPP");
+			snd_soc_component_force_enable_pin(component,
+							   "MICSUPP");
 		else
-			snd_soc_dapm_disable_pin(dapm, "MICSUPP");
+			snd_soc_component_disable_pin(component, "MICSUPP");
 
 		snd_soc_dapm_sync(dapm);
 	}
@@ -104,7 +106,7 @@ static int arizona_micsupp_set_bypass(struct regulator_dev *rdev, bool ena)
 	return ret;
 }
 
-static struct regulator_ops arizona_micsupp_ops = {
+static const struct regulator_ops arizona_micsupp_ops = {
 	.enable = arizona_micsupp_enable,
 	.disable = arizona_micsupp_disable,
 	.is_enabled = regulator_is_enabled_regmap,

drivers/regulator/as3711-regulator.c

@@ -82,7 +82,7 @@ static unsigned int as3711_get_mode_sd(struct regulator_dev *rdev)
 	return -EINVAL;
 }
 
-static struct regulator_ops as3711_sd_ops = {
+static const struct regulator_ops as3711_sd_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -94,7 +94,7 @@ static struct regulator_ops as3711_sd_ops = {
 	.set_mode		= as3711_set_mode_sd,
 };
 
-static struct regulator_ops as3711_aldo_ops = {
+static const struct regulator_ops as3711_aldo_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -104,7 +104,7 @@ static struct regulator_ops as3711_aldo_ops = {
 	.map_voltage		= regulator_map_voltage_linear_range,
 };
 
-static struct regulator_ops as3711_dldo_ops = {
+static const struct regulator_ops as3711_dldo_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,

drivers/regulator/axp20x-regulator.c

@@ -128,11 +128,11 @@
 		.ops		= &axp20x_ops_range,				\
 	}
 
-static struct regulator_ops axp20x_ops_fixed = {
+static const struct regulator_ops axp20x_ops_fixed = {
 	.list_voltage		= regulator_list_voltage_linear,
 };
 
-static struct regulator_ops axp20x_ops_range = {
+static const struct regulator_ops axp20x_ops_range = {
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.list_voltage		= regulator_list_voltage_linear_range,
@@ -141,7 +141,7 @@ static struct regulator_ops axp20x_ops_range = {
 	.is_enabled		= regulator_is_enabled_regmap,
 };
 
-static struct regulator_ops axp20x_ops = {
+static const struct regulator_ops axp20x_ops = {
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.list_voltage		= regulator_list_voltage_linear,
@@ -150,7 +150,7 @@ static struct regulator_ops axp20x_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 };
 
-static struct regulator_ops axp20x_ops_sw = {
+static const struct regulator_ops axp20x_ops_sw = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,

drivers/regulator/bcm590xx-regulator.c

@@ -250,7 +250,7 @@ static int bcm590xx_get_enable_register(int id)
 	return reg;
 }
 
-static struct regulator_ops bcm590xx_ops_ldo = {
+static const struct regulator_ops bcm590xx_ops_ldo = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -260,7 +260,7 @@ static struct regulator_ops bcm590xx_ops_ldo = {
 	.map_voltage		= regulator_map_voltage_iterate,
 };
 
-static struct regulator_ops bcm590xx_ops_dcdc = {
+static const struct regulator_ops bcm590xx_ops_dcdc = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -270,7 +270,7 @@ static struct regulator_ops bcm590xx_ops_dcdc = {
 	.map_voltage		= regulator_map_voltage_linear_range,
 };
 
-static struct regulator_ops bcm590xx_ops_vbus = {
+static const struct regulator_ops bcm590xx_ops_vbus = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,

drivers/regulator/core.c

@@ -1455,12 +1455,14 @@ static struct regulator_dev *regulator_lookup_by_name(const char *name)
  * lookup could succeed in the future.
  *
  * If successful, returns a struct regulator_dev that corresponds to the name
- * @supply and with the embedded struct device refcount incremented by one,
- * or NULL on failure. The refcount must be dropped by calling put_device().
+ * @supply and with the embedded struct device refcount incremented by one.
+ * The refcount must be dropped by calling put_device().
+ * On failure one of the following ERR-PTR-encoded values is returned:
+ * -ENODEV if lookup fails permanently, -EPROBE_DEFER if lookup could succeed
+ * in the future.
  */
 static struct regulator_dev *regulator_dev_lookup(struct device *dev,
-						  const char *supply,
-						  int *ret)
+						  const char *supply)
 {
 	struct regulator_dev *r;
 	struct device_node *node;
@@ -1476,16 +1478,12 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 			r = of_find_regulator_by_node(node);
 			if (r)
 				return r;
-			*ret = -EPROBE_DEFER;
-			return NULL;
-		} else {
+
 			/*
-			 * If we couldn't even get the node then it's
-			 * not just that the device didn't register
-			 * yet, there's no node and we'll never
-			 * succeed.
+			 * We have a node, but there is no device.
+			 * assume it has not registered yet.
 			 */
-			*ret = -ENODEV;
+			return ERR_PTR(-EPROBE_DEFER);
 		}
 	}
 
@@ -1506,13 +1504,16 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 
 		if (strcmp(map->supply, supply) == 0 &&
 		    get_device(&map->regulator->dev)) {
-			mutex_unlock(&regulator_list_mutex);
-			return map->regulator;
+			r = map->regulator;
+			break;
 		}
 	}
 	mutex_unlock(&regulator_list_mutex);
 
-	return NULL;
+	if (r)
+		return r;
+
+	return ERR_PTR(-ENODEV);
 }
 
 static int regulator_resolve_supply(struct regulator_dev *rdev)
@@ -1529,8 +1530,10 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 	if (rdev->supply)
 		return 0;
 
-	r = regulator_dev_lookup(dev, rdev->supply_name, &ret);
-	if (!r) {
+	r = regulator_dev_lookup(dev, rdev->supply_name);
+	if (IS_ERR(r)) {
+		ret = PTR_ERR(r);
+
 		if (ret == -ENODEV) {
 			/*
 			 * No supply was specified for this regulator and
@@ -1553,6 +1556,19 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 		}
 	}
 
+	/*
+	 * If the supply's parent device is not the same as the
+	 * regulator's parent device, then ensure the parent device
+	 * is bound before we resolve the supply, in case the parent
+	 * device get probe deferred and unregisters the supply.
+	 */
+	if (r->dev.parent && r->dev.parent != rdev->dev.parent) {
+		if (!device_is_bound(r->dev.parent)) {
+			put_device(&r->dev);
+			return -EPROBE_DEFER;
+		}
+	}
+
 	/* Recursively resolve the supply of the supply */
 	ret = regulator_resolve_supply(r);
 	if (ret < 0) {
@@ -1580,69 +1596,72 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 }
 
 /* Internal regulator request function */
-static struct regulator *_regulator_get(struct device *dev, const char *id,
-					bool exclusive, bool allow_dummy)
+struct regulator *_regulator_get(struct device *dev, const char *id,
+				 enum regulator_get_type get_type)
 {
 	struct regulator_dev *rdev;
-	struct regulator *regulator = ERR_PTR(-EPROBE_DEFER);
-	const char *devname = NULL;
+	struct regulator *regulator;
+	const char *devname = dev ? dev_name(dev) : "deviceless";
 	int ret;
 
+	if (get_type >= MAX_GET_TYPE) {
+		dev_err(dev, "invalid type %d in %s\n", get_type, __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
 	if (id == NULL) {
 		pr_err("get() with no identifier\n");
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (dev)
-		devname = dev_name(dev);
+	rdev = regulator_dev_lookup(dev, id);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
 
-	if (have_full_constraints())
-		ret = -ENODEV;
-	else
-		ret = -EPROBE_DEFER;
-
-	rdev = regulator_dev_lookup(dev, id, &ret);
-	if (rdev)
-		goto found;
-
-	regulator = ERR_PTR(ret);
+		/*
+		 * If regulator_dev_lookup() fails with error other
+		 * than -ENODEV our job here is done, we simply return it.
+		 */
+		if (ret != -ENODEV)
+			return ERR_PTR(ret);
 
-	/*
-	 * If we have return value from dev_lookup fail, we do not expect to
-	 * succeed, so, quit with appropriate error value
-	 */
-	if (ret && ret != -ENODEV)
-		return regulator;
+		if (!have_full_constraints()) {
+			dev_warn(dev,
+				 "incomplete constraints, dummy supplies not allowed\n");
+			return ERR_PTR(-ENODEV);
+		}
 
-	if (!devname)
-		devname = "deviceless";
+		switch (get_type) {
+		case NORMAL_GET:
+			/*
+			 * Assume that a regulator is physically present and
+			 * enabled, even if it isn't hooked up, and just
+			 * provide a dummy.
+			 */
+			dev_warn(dev,
+				 "%s supply %s not found, using dummy regulator\n",
+				 devname, id);
+			rdev = dummy_regulator_rdev;
+			get_device(&rdev->dev);
+			break;
 
-	/*
-	 * Assume that a regulator is physically present and enabled
-	 * even if it isn't hooked up and just provide a dummy.
-	 */
-	if (have_full_constraints() && allow_dummy) {
-		pr_warn("%s supply %s not found, using dummy regulator\n",
-			devname, id);
+		case EXCLUSIVE_GET:
+			dev_warn(dev,
+				 "dummy supplies not allowed for exclusive requests\n");
+			/* fall through */
 
-		rdev = dummy_regulator_rdev;
-		get_device(&rdev->dev);
-		goto found;
-	/* Don't log an error when called from regulator_get_optional() */
-	} else if (!have_full_constraints() || exclusive) {
-		dev_warn(dev, "dummy supplies not allowed\n");
+		default:
+			return ERR_PTR(-ENODEV);
+		}
 	}
 
-	return regulator;
-
-found:
 	if (rdev->exclusive) {
 		regulator = ERR_PTR(-EPERM);
 		put_device(&rdev->dev);
 		return regulator;
 	}
 
-	if (exclusive && rdev->open_count) {
+	if (get_type == EXCLUSIVE_GET && rdev->open_count) {
 		regulator = ERR_PTR(-EBUSY);
 		put_device(&rdev->dev);
 		return regulator;
@@ -1656,6 +1675,7 @@ found:
 	}
 
 	if (!try_module_get(rdev->owner)) {
+		regulator = ERR_PTR(-EPROBE_DEFER);
 		put_device(&rdev->dev);
 		return regulator;
 	}
@@ -1669,7 +1689,7 @@ found:
 	}
 
 	rdev->open_count++;
-	if (exclusive) {
+	if (get_type == EXCLUSIVE_GET) {
 		rdev->exclusive = 1;
 
 		ret = _regulator_is_enabled(rdev);
@@ -1697,7 +1717,7 @@ found:
  */
 struct regulator *regulator_get(struct device *dev, const char *id)
 {
-	return _regulator_get(dev, id, false, true);
+	return _regulator_get(dev, id, NORMAL_GET);
 }
 EXPORT_SYMBOL_GPL(regulator_get);
 
@@ -1724,7 +1744,7 @@ EXPORT_SYMBOL_GPL(regulator_get);
  */
 struct regulator *regulator_get_exclusive(struct device *dev, const char *id)
 {
-	return _regulator_get(dev, id, true, false);
+	return _regulator_get(dev, id, EXCLUSIVE_GET);
 }
 EXPORT_SYMBOL_GPL(regulator_get_exclusive);
 
@@ -1750,7 +1770,7 @@ EXPORT_SYMBOL_GPL(regulator_get_exclusive);
  */
 struct regulator *regulator_get_optional(struct device *dev, const char *id)
 {
-	return _regulator_get(dev, id, false, false);
+	return _regulator_get(dev, id, OPTIONAL_GET);
 }
 EXPORT_SYMBOL_GPL(regulator_get_optional);
 
@@ -3660,7 +3680,7 @@ err:
 	for (++i; i < num_consumers; ++i) {
 		r = regulator_enable(consumers[i].consumer);
 		if (r != 0)
-			pr_err("Failed to reename %s: %d\n",
+			pr_err("Failed to re-enable %s: %d\n",
 			       consumers[i].supply, r);
 	}
 
@@ -3686,21 +3706,17 @@ int regulator_bulk_force_disable(int num_consumers,
 			   struct regulator_bulk_data *consumers)
 {
 	int i;
-	int ret;
+	int ret = 0;
 
-	for (i = 0; i < num_consumers; i++)
+	for (i = 0; i < num_consumers; i++) {
 		consumers[i].ret =
 			    regulator_force_disable(consumers[i].consumer);
 
-	for (i = 0; i < num_consumers; i++) {
-		if (consumers[i].ret != 0) {
+		/* Store first error for reporting */
+		if (consumers[i].ret && !ret)
 			ret = consumers[i].ret;
-			goto out;
-		}
 	}
 
-	return 0;
-out:
 	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_bulk_force_disable);
@@ -4391,12 +4407,13 @@ static void regulator_summary_show_subtree(struct seq_file *s,
 	seq_puts(s, "\n");
 
 	list_for_each_entry(consumer, &rdev->consumer_list, list) {
-		if (consumer->dev->class == &regulator_class)
+		if (consumer->dev && consumer->dev->class == &regulator_class)
 			continue;
 
 		seq_printf(s, "%*s%-*s ",
 			   (level + 1) * 3 + 1, "",
-			   30 - (level + 1) * 3, dev_name(consumer->dev));
+			   30 - (level + 1) * 3,
+			   consumer->dev ? dev_name(consumer->dev) : "deviceless");
 
 		switch (rdev->desc->type) {
 		case REGULATOR_VOLTAGE:
@@ -4540,6 +4557,16 @@ static int __init regulator_init_complete(void)
 	if (of_have_populated_dt())
 		has_full_constraints = true;
 
+	/*
+	 * Regulators may had failed to resolve their input supplies
+	 * when were registered, either because the input supply was
+	 * not registered yet or because its parent device was not
+	 * bound yet. So attempt to resolve the input supplies for
+	 * pending regulators before trying to disable unused ones.
+	 */
+	class_for_each_device(&regulator_class, NULL, NULL,
+			      regulator_register_resolve_supply);
+
 	/* If we have a full configuration then disable any regulators
 	 * we have permission to change the status for and which are
 	 * not in use or always_on.  This is effectively the default

drivers/regulator/cpcap-regulator.c

@@ -0,0 +1,464 @@
+/*
+ * Motorola CPCAP PMIC regulator driver
+ *
+ * Based on cpcap-regulator.c from Motorola Linux kernel tree
+ * Copyright (C) 2009-2011 Motorola, Inc.
+ *
+ * Rewritten for mainline kernel to use device tree and regmap
+ * Copyright (C) 2017 Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/motorola-cpcap.h>
+
+/*
+ * Resource assignment register bits. These seem to control the state
+ * idle modes adn are used at least for omap4.
+ */
+
+/* CPCAP_REG_ASSIGN2 bits - Resource Assignment 2 */
+#define CPCAP_BIT_VSDIO_SEL		BIT(15)
+#define CPCAP_BIT_VDIG_SEL		BIT(14)
+#define CPCAP_BIT_VCAM_SEL		BIT(13)
+#define CPCAP_BIT_SW6_SEL		BIT(12)
+#define CPCAP_BIT_SW5_SEL		BIT(11)
+#define CPCAP_BIT_SW4_SEL		BIT(10)
+#define CPCAP_BIT_SW3_SEL		BIT(9)
+#define CPCAP_BIT_SW2_SEL		BIT(8)
+#define CPCAP_BIT_SW1_SEL		BIT(7)
+
+/* CPCAP_REG_ASSIGN3 bits - Resource Assignment 3 */
+#define CPCAP_BIT_VUSBINT2_SEL		BIT(15)
+#define CPCAP_BIT_VUSBINT1_SEL		BIT(14)
+#define CPCAP_BIT_VVIB_SEL		BIT(13)
+#define CPCAP_BIT_VWLAN1_SEL		BIT(12)
+#define CPCAP_BIT_VRF1_SEL		BIT(11)
+#define CPCAP_BIT_VHVIO_SEL		BIT(10)
+#define CPCAP_BIT_VDAC_SEL		BIT(9)
+#define CPCAP_BIT_VUSB_SEL		BIT(8)
+#define CPCAP_BIT_VSIM_SEL		BIT(7)
+#define CPCAP_BIT_VRFREF_SEL		BIT(6)
+#define CPCAP_BIT_VPLL_SEL		BIT(5)
+#define CPCAP_BIT_VFUSE_SEL		BIT(4)
+#define CPCAP_BIT_VCSI_SEL		BIT(3)
+#define CPCAP_BIT_SPARE_14_2		BIT(2)
+#define CPCAP_BIT_VWLAN2_SEL		BIT(1)
+#define CPCAP_BIT_VRF2_SEL		BIT(0)
+
+/* CPCAP_REG_ASSIGN4 bits - Resource Assignment 4 */
+#define CPCAP_BIT_VAUDIO_SEL		BIT(0)
+
+/*
+ * Enable register bits. At least CPCAP_BIT_AUDIO_LOW_PWR is generic,
+ * and not limited to audio regulator. Let's use the Motorola kernel
+ * naming for now until we have a better understanding of the other
+ * enable register bits. No idea why BIT(3) is not defined.
+ */
+#define CPCAP_BIT_AUDIO_LOW_PWR		BIT(6)
+#define CPCAP_BIT_AUD_LOWPWR_SPEED	BIT(5)
+#define CPCAP_BIT_VAUDIOPRISTBY		BIT(4)
+#define CPCAP_BIT_VAUDIO_MODE1		BIT(2)
+#define CPCAP_BIT_VAUDIO_MODE0		BIT(1)
+#define CPCAP_BIT_V_AUDIO_EN		BIT(0)
+
+/*
+ * Off mode configuration bit. Used currently only by SW5 on omap4. There's
+ * the following comment in Motorola Linux kernel tree for it:
+ *
+ * When set in the regulator mode, the regulator assignment will be changed
+ * to secondary when the regulator is disabled. The mode will be set back to
+ * primary when the regulator is turned on.
+ */
+#define CPCAP_REG_OFF_MODE_SEC		BIT(15)
+
+/**
+ * SoC specific configuraion for CPCAP regulator. There are at least three
+ * different SoCs each with their own parameters: omap3, omap4 and tegra2.
+ *
+ * The assign_reg and assign_mask seem to allow toggling between primary
+ * and secondary mode that at least omap4 uses for off mode.
+ */
+struct cpcap_regulator {
+	struct regulator_desc rdesc;
+	const u16 assign_reg;
+	const u16 assign_mask;
+	const u16 vsel_shift;
+};
+
+#define CPCAP_REG(_ID, reg, assignment_reg, assignment_mask, val_tbl,	\
+		mode_mask, volt_mask, volt_shft,			\
+		mode_val, off_val, volt_trans_time) {			\
+	.rdesc = {							\
+		.name = #_ID,						\
+		.of_match = of_match_ptr(#_ID),				\
+		.ops = &cpcap_regulator_ops,				\
+		.regulators_node = of_match_ptr("regulators"),		\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = CPCAP_##_ID,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(val_tbl),			\
+		.volt_table = (val_tbl),				\
+		.vsel_reg = (reg),					\
+		.vsel_mask = (volt_mask),				\
+		.enable_reg = (reg),					\
+		.enable_mask = (mode_mask),				\
+		.enable_val = (mode_val),				\
+		.disable_val = (off_val),				\
+		.ramp_delay = (volt_trans_time),			\
+	},								\
+	.assign_reg = (assignment_reg),					\
+	.assign_mask = (assignment_mask),				\
+	.vsel_shift = (volt_shft),					\
+}
+
+struct cpcap_ddata {
+	struct regmap *reg;
+	struct device *dev;
+	const struct cpcap_regulator *soc;
+};
+
+enum cpcap_regulator_id {
+	CPCAP_SW1,
+	CPCAP_SW2,
+	CPCAP_SW3,
+	CPCAP_SW4,
+	CPCAP_SW5,
+	CPCAP_SW6,
+	CPCAP_VCAM,
+	CPCAP_VCSI,
+	CPCAP_VDAC,
+	CPCAP_VDIG,
+	CPCAP_VFUSE,
+	CPCAP_VHVIO,
+	CPCAP_VSDIO,
+	CPCAP_VPLL,
+	CPCAP_VRF1,
+	CPCAP_VRF2,
+	CPCAP_VRFREF,
+	CPCAP_VWLAN1,
+	CPCAP_VWLAN2,
+	CPCAP_VSIM,
+	CPCAP_VSIMCARD,
+	CPCAP_VVIB,
+	CPCAP_VUSB,
+	CPCAP_VAUDIO,
+	CPCAP_NR_REGULATORS,
+};
+
+/*
+ * We need to also configure regulator idle mode for SoC off mode if
+ * CPCAP_REG_OFF_MODE_SEC is set.
+ */
+static int cpcap_regulator_enable(struct regulator_dev *rdev)
+{
+	struct cpcap_regulator *regulator = rdev_get_drvdata(rdev);
+	int error, ignore;
+
+	error = regulator_enable_regmap(rdev);
+	if (error)
+		return error;
+
+	if (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC) {
+		error = regmap_update_bits(rdev->regmap, regulator->assign_reg,
+					   regulator->assign_mask,
+					   regulator->assign_mask);
+		if (error)
+			ignore = regulator_disable_regmap(rdev);
+	}
+
+	return error;
+}
+
+/*
+ * We need to also configure regulator idle mode for SoC off mode if
+ * CPCAP_REG_OFF_MODE_SEC is set.
+ */
+static int cpcap_regulator_disable(struct regulator_dev *rdev)
+{
+	struct cpcap_regulator *regulator = rdev_get_drvdata(rdev);
+	int error, ignore;
+
+	if (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC) {
+		error = regmap_update_bits(rdev->regmap, regulator->assign_reg,
+					   regulator->assign_mask, 0);
+		if (error)
+			return error;
+	}
+
+	error = regulator_disable_regmap(rdev);
+	if (error && (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC)) {
+		ignore = regmap_update_bits(rdev->regmap, regulator->assign_reg,
+					    regulator->assign_mask,
+					    regulator->assign_mask);
+	}
+
+	return error;
+}
+
+static unsigned int cpcap_regulator_get_mode(struct regulator_dev *rdev)
+{
+	int value;
+
+	regmap_read(rdev->regmap, rdev->desc->enable_reg, &value);
+
+	if (!(value & CPCAP_BIT_AUDIO_LOW_PWR))
+		return REGULATOR_MODE_STANDBY;
+
+	return REGULATOR_MODE_NORMAL;
+}
+
+static int cpcap_regulator_set_mode(struct regulator_dev *rdev,
+				    unsigned int mode)
+{
+	int value;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		value = CPCAP_BIT_AUDIO_LOW_PWR;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		value = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+				  CPCAP_BIT_AUDIO_LOW_PWR, value);
+}
+
+static struct regulator_ops cpcap_regulator_ops = {
+	.enable = cpcap_regulator_enable,
+	.disable = cpcap_regulator_disable,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_mode = cpcap_regulator_get_mode,
+	.set_mode = cpcap_regulator_set_mode,
+};
+
+static const unsigned int unknown_val_tbl[] = { 0, };
+static const unsigned int sw5_val_tbl[] = { 0, 5050000, };
+static const unsigned int vcam_val_tbl[] = { 2600000, 2700000, 2800000,
+					     2900000, };
+static const unsigned int vcsi_val_tbl[] = { 1200000, 1800000, };
+static const unsigned int vdac_val_tbl[] = { 1200000, 1500000, 1800000,
+					     2500000,};
+static const unsigned int vdig_val_tbl[] = { 1200000, 1350000, 1500000,
+					     1875000, };
+static const unsigned int vfuse_val_tbl[] = { 1500000, 1600000, 1700000,
+					      1800000, 1900000, 2000000,
+					      2100000, 2200000, 2300000,
+					      2400000, 2500000, 2600000,
+					      2700000, 3150000, };
+static const unsigned int vhvio_val_tbl[] = { 2775000, };
+static const unsigned int vsdio_val_tbl[] = { 1500000, 1600000, 1800000,
+					      2600000, 2700000, 2800000,
+					      2900000, 3000000, };
+static const unsigned int vpll_val_tbl[] = { 1200000, 1300000, 1400000,
+					     1800000, };
+/* Quirk: 2775000 is before 2500000 for vrf1 regulator */
+static const unsigned int vrf1_val_tbl[] = { 2775000, 2500000, };
+static const unsigned int vrf2_val_tbl[] = { 0, 2775000, };
+static const unsigned int vrfref_val_tbl[] = { 2500000, 2775000, };
+static const unsigned int vwlan1_val_tbl[] = { 1800000, 1900000, };
+static const unsigned int vwlan2_val_tbl[] = { 2775000, 3000000, 3300000,
+					       3300000, };
+static const unsigned int vsim_val_tbl[] = { 1800000, 2900000, };
+static const unsigned int vsimcard_val_tbl[] = { 1800000, 2900000, };
+static const unsigned int vvib_val_tbl[] = { 1300000, 1800000, 2000000,
+					     3000000, };
+static const unsigned int vusb_val_tbl[] = { 0, 3300000, };
+static const unsigned int vaudio_val_tbl[] = { 0, 2775000, };
+
+/**
+ * SoC specific configuration for omap4. The data below is comes from Motorola
+ * Linux kernel tree. It's basically the values of cpcap_regltr_data,
+ * cpcap_regulator_mode_values and cpcap_regulator_off_mode_values, see
+ * CPCAP_REG macro above.
+ *
+ * SW1 to SW4 and SW6 seems to be unused for mapphone. Note that VSIM and
+ * VSIMCARD have a shared resource assignment bit.
+ */
+static struct cpcap_regulator omap4_regulators[] = {
+	CPCAP_REG(SW1, CPCAP_REG_S1C1, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_SW1_SEL, unknown_val_tbl,
+		  0, 0, 0, 0, 0, 0),
+	CPCAP_REG(SW2, CPCAP_REG_S2C1, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_SW2_SEL, unknown_val_tbl,
+		  0, 0, 0, 0, 0, 0),
+	CPCAP_REG(SW3, CPCAP_REG_S3C, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_SW3_SEL, unknown_val_tbl,
+		  0, 0, 0, 0, 0, 0),
+	CPCAP_REG(SW4, CPCAP_REG_S4C1, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_SW4_SEL, unknown_val_tbl,
+		  0, 0, 0, 0, 0, 0),
+	CPCAP_REG(SW5, CPCAP_REG_S5C, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_SW5_SEL, sw5_val_tbl,
+		  0x28, 0, 0, 0x20 | CPCAP_REG_OFF_MODE_SEC, 0, 0),
+	CPCAP_REG(SW6, CPCAP_REG_S6C, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_SW6_SEL, unknown_val_tbl,
+		  0, 0, 0, 0, 0, 0),
+	CPCAP_REG(VCAM, CPCAP_REG_VCAMC, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_VCAM_SEL, vcam_val_tbl,
+		  0x87, 0x30, 4, 0x3, 0, 420),
+	CPCAP_REG(VCSI, CPCAP_REG_VCSIC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VCSI_SEL, vcsi_val_tbl,
+		  0x47, 0x10, 4, 0x43, 0x41, 350),
+	CPCAP_REG(VDAC, CPCAP_REG_VDACC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VDAC_SEL, vdac_val_tbl,
+		  0x87, 0x30, 4, 0x3, 0, 420),
+	CPCAP_REG(VDIG, CPCAP_REG_VDIGC, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_VDIG_SEL, vdig_val_tbl,
+		  0x87, 0x30, 4, 0x82, 0, 420),
+	CPCAP_REG(VFUSE, CPCAP_REG_VFUSEC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VFUSE_SEL, vfuse_val_tbl,
+		  0x80, 0xf, 0, 0x80, 0, 420),
+	CPCAP_REG(VHVIO, CPCAP_REG_VHVIOC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VHVIO_SEL, vhvio_val_tbl,
+		  0x17, 0, 0, 0, 0x12, 0),
+	CPCAP_REG(VSDIO, CPCAP_REG_VSDIOC, CPCAP_REG_ASSIGN2,
+		  CPCAP_BIT_VSDIO_SEL, vsdio_val_tbl,
+		  0x87, 0x38, 3, 0x82, 0, 420),
+	CPCAP_REG(VPLL, CPCAP_REG_VPLLC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VPLL_SEL, vpll_val_tbl,
+		  0x43, 0x18, 3, 0x2, 0, 420),
+	CPCAP_REG(VRF1, CPCAP_REG_VRF1C, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VRF1_SEL, vrf1_val_tbl,
+		  0xac, 0x2, 1, 0x4, 0, 10),
+	CPCAP_REG(VRF2, CPCAP_REG_VRF2C, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VRF2_SEL, vrf2_val_tbl,
+		  0x23, 0x8, 3, 0, 0, 10),
+	CPCAP_REG(VRFREF, CPCAP_REG_VRFREFC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VRFREF_SEL, vrfref_val_tbl,
+		  0x23, 0x8, 3, 0, 0, 420),
+	CPCAP_REG(VWLAN1, CPCAP_REG_VWLAN1C, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VWLAN1_SEL, vwlan1_val_tbl,
+		  0x47, 0x10, 4, 0, 0, 420),
+	CPCAP_REG(VWLAN2, CPCAP_REG_VWLAN2C, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VWLAN2_SEL, vwlan2_val_tbl,
+		  0x20c, 0xc0, 6, 0x20c, 0, 420),
+	CPCAP_REG(VSIM, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
+		  0xffff, vsim_val_tbl,
+		  0x23, 0x8, 3, 0x3, 0, 420),
+	CPCAP_REG(VSIMCARD, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
+		  0xffff, vsimcard_val_tbl,
+		  0x1e80, 0x8, 3, 0x1e00, 0, 420),
+	CPCAP_REG(VVIB, CPCAP_REG_VVIBC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VVIB_SEL, vvib_val_tbl,
+		  0x1, 0xc, 2, 0x1, 0, 500),
+	CPCAP_REG(VUSB, CPCAP_REG_VUSBC, CPCAP_REG_ASSIGN3,
+		  CPCAP_BIT_VUSB_SEL, vusb_val_tbl,
+		  0x11c, 0x40, 6, 0xc, 0, 0),
+	CPCAP_REG(VAUDIO, CPCAP_REG_VAUDIOC, CPCAP_REG_ASSIGN4,
+		  CPCAP_BIT_VAUDIO_SEL, vaudio_val_tbl,
+		  0x16, 0x1, 0, 0x4, 0, 0),
+	{ /* sentinel */ },
+};
+
+static const struct of_device_id cpcap_regulator_id_table[] = {
+	{
+		.compatible = "motorola,cpcap-regulator",
+	},
+	{
+		.compatible = "motorola,mapphone-cpcap-regulator",
+		.data = omap4_regulators,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, cpcap_regulator_id_table);
+
+static int cpcap_regulator_probe(struct platform_device *pdev)
+{
+	struct cpcap_ddata *ddata;
+	const struct of_device_id *match;
+	struct regulator_config config;
+	struct regulator_init_data init_data;
+	int i;
+
+	match = of_match_device(of_match_ptr(cpcap_regulator_id_table),
+				&pdev->dev);
+	if (!match)
+		return -EINVAL;
+
+	if (!match->data) {
+		dev_err(&pdev->dev, "no configuration data found\n");
+
+		return -ENODEV;
+	}
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	ddata->reg = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!ddata->reg)
+		return -ENODEV;
+
+	ddata->dev = &pdev->dev;
+	ddata->soc = match->data;
+	platform_set_drvdata(pdev, ddata);
+
+	memset(&config, 0, sizeof(config));
+	memset(&init_data, 0, sizeof(init_data));
+	config.dev = &pdev->dev;
+	config.regmap = ddata->reg;
+	config.init_data = &init_data;
+
+	for (i = 0; i < CPCAP_NR_REGULATORS; i++) {
+		const struct cpcap_regulator *regulator = &ddata->soc[i];
+		struct regulator_dev *rdev;
+
+		if (!regulator->rdesc.name)
+			break;
+
+		if (regulator->rdesc.volt_table == unknown_val_tbl)
+			continue;
+
+		config.driver_data = (void *)regulator;
+		rdev = devm_regulator_register(&pdev->dev,
+					       &regulator->rdesc,
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+				regulator->rdesc.name);
+
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver cpcap_regulator_driver = {
+	.probe		= cpcap_regulator_probe,
+	.driver		= {
+		.name	= "cpcap-regulator",
+		.of_match_table = of_match_ptr(cpcap_regulator_id_table),
+	},
+};
+
+module_platform_driver(cpcap_regulator_driver);
+
+MODULE_ALIAS("platform:cpcap-regulator");
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("CPCAP regulator driver");
+MODULE_LICENSE("GPL v2");

drivers/regulator/devres.c

@@ -19,12 +19,6 @@
 
 #include "internal.h"
 
-enum {
-	NORMAL_GET,
-	EXCLUSIVE_GET,
-	OPTIONAL_GET,
-};
-
 static void devm_regulator_release(struct device *dev, void *res)
 {
 	regulator_put(*(struct regulator **)res);
@@ -39,20 +33,7 @@ static struct regulator *_devm_regulator_get(struct device *dev, const char *id,
 	if (!ptr)
 		return ERR_PTR(-ENOMEM);
 
-	switch (get_type) {
-	case NORMAL_GET:
-		regulator = regulator_get(dev, id);
-		break;
-	case EXCLUSIVE_GET:
-		regulator = regulator_get_exclusive(dev, id);
-		break;
-	case OPTIONAL_GET:
-		regulator = regulator_get_optional(dev, id);
-		break;
-	default:
-		regulator = ERR_PTR(-EINVAL);
-	}
-
+	regulator = _regulator_get(dev, id, get_type);
 	if (!IS_ERR(regulator)) {
 		*ptr = regulator;
 		devres_add(dev, ptr);
@@ -139,6 +120,18 @@ void devm_regulator_put(struct regulator *regulator)
 }
 EXPORT_SYMBOL_GPL(devm_regulator_put);
 
+struct regulator_bulk_devres {
+	struct regulator_bulk_data *consumers;
+	int num_consumers;
+};
+
+static void devm_regulator_bulk_release(struct device *dev, void *res)
+{
+	struct regulator_bulk_devres *devres = res;
+
+	regulator_bulk_free(devres->num_consumers, devres->consumers);
+}
+
 /**
  * devm_regulator_bulk_get - managed get multiple regulator consumers
  *
@@ -157,29 +150,22 @@ EXPORT_SYMBOL_GPL(devm_regulator_put);
 int devm_regulator_bulk_get(struct device *dev, int num_consumers,
 			    struct regulator_bulk_data *consumers)
 {
-	int i;
+	struct regulator_bulk_devres *devres;
 	int ret;
 
-	for (i = 0; i < num_consumers; i++)
-		consumers[i].consumer = NULL;
-
-	for (i = 0; i < num_consumers; i++) {
-		consumers[i].consumer = devm_regulator_get(dev,
-							   consumers[i].supply);
-		if (IS_ERR(consumers[i].consumer)) {
-			ret = PTR_ERR(consumers[i].consumer);
-			dev_err(dev, "Failed to get supply '%s': %d\n",
-				consumers[i].supply, ret);
-			consumers[i].consumer = NULL;
-			goto err;
-		}
-	}
-
-	return 0;
+	devres = devres_alloc(devm_regulator_bulk_release,
+			      sizeof(*devres), GFP_KERNEL);
+	if (!devres)
+		return -ENOMEM;
 
-err:
-	for (i = 0; i < num_consumers && consumers[i].consumer; i++)
-		devm_regulator_put(consumers[i].consumer);
+	ret = regulator_bulk_get(dev, num_consumers, consumers);
+	if (!ret) {
+		devres->consumers = consumers;
+		devres->num_consumers = num_consumers;
+		devres_add(dev, devres);
+	} else {
+		devres_free(devres);
+	}
 
 	return ret;
 }

drivers/regulator/fan53555.c

@@ -202,7 +202,7 @@ static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
 				  CTL_SLEW_MASK, regval << CTL_SLEW_SHIFT);
 }
 
-static struct regulator_ops fan53555_regulator_ops = {
+static const struct regulator_ops fan53555_regulator_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,

drivers/regulator/hi655x-regulator.c

@@ -96,7 +96,7 @@ static int hi655x_disable(struct regulator_dev *rdev)
 	return ret;
 }
 
-static struct regulator_ops hi655x_regulator_ops = {
+static const struct regulator_ops hi655x_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = hi655x_disable,
 	.is_enabled = hi655x_is_enabled,
@@ -105,7 +105,7 @@ static struct regulator_ops hi655x_regulator_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 };
 
-static struct regulator_ops hi655x_ldo_linear_ops = {
+static const struct regulator_ops hi655x_ldo_linear_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = hi655x_disable,
 	.is_enabled = hi655x_is_enabled,

drivers/regulator/internal.h

@@ -51,4 +51,14 @@ regulator_of_get_init_data(struct device *dev,
 }
 #endif
 
+enum regulator_get_type {
+	NORMAL_GET,
+	EXCLUSIVE_GET,
+	OPTIONAL_GET,
+	MAX_GET_TYPE
+};
+
+struct regulator *_regulator_get(struct device *dev, const char *id,
+				 enum regulator_get_type get_type);
+
 #endif

drivers/regulator/lp8755.c

@@ -227,7 +227,7 @@ err_i2c:
 	return ret;
 }
 
-static struct regulator_ops lp8755_buck_ops = {
+static const struct regulator_ops lp8755_buck_ops = {
 	.map_voltage = regulator_map_voltage_linear,
 	.list_voltage = regulator_list_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,

drivers/regulator/ltc3589.c

@@ -161,7 +161,7 @@ static int ltc3589_set_suspend_mode(struct regulator_dev *rdev,
 }
 
 /* SW1, SW2, SW3, LDO2 */
-static struct regulator_ops ltc3589_linear_regulator_ops = {
+static const struct regulator_ops ltc3589_linear_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
@@ -175,18 +175,18 @@ static struct regulator_ops ltc3589_linear_regulator_ops = {
 };
 
 /* BB_OUT, LDO3 */
-static struct regulator_ops ltc3589_fixed_regulator_ops = {
+static const struct regulator_ops ltc3589_fixed_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 };
 
 /* LDO1 */
-static struct regulator_ops ltc3589_fixed_standby_regulator_ops = {
+static const struct regulator_ops ltc3589_fixed_standby_regulator_ops = {
 };
 
 /* LDO4 */
-static struct regulator_ops ltc3589_table_regulator_ops = {
+static const struct regulator_ops ltc3589_table_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,

drivers/regulator/ltc3676.c

@@ -161,7 +161,7 @@ static int ltc3676_of_parse_cb(struct device_node *np,
 }
 
 /* SW1, SW2, SW3, SW4 linear 0.8V-3.3V with scalar via R1/R2 feeback res */
-static struct regulator_ops ltc3676_linear_regulator_ops = {
+static const struct regulator_ops ltc3676_linear_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
@@ -173,11 +173,11 @@ static struct regulator_ops ltc3676_linear_regulator_ops = {
 };
 
 /* LDO1 always on fixed 0.8V-3.3V via scalar via R1/R2 feeback res */
-static struct regulator_ops ltc3676_fixed_standby_regulator_ops = {
+static const struct regulator_ops ltc3676_fixed_standby_regulator_ops = {
 };
 
 /* LDO2, LDO3 fixed (LDO2 has external scalar via R1/R2 feedback res) */
-static struct regulator_ops ltc3676_fixed_regulator_ops = {
+static const struct regulator_ops ltc3676_fixed_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,

drivers/regulator/max14577-regulator.c

@@ -85,14 +85,14 @@ static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
 			reg_data);
 }
 
-static struct regulator_ops max14577_safeout_ops = {
+static const struct regulator_ops max14577_safeout_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.list_voltage		= regulator_list_voltage_linear,
 };
 
-static struct regulator_ops max14577_charger_ops = {
+static const struct regulator_ops max14577_charger_ops = {
 	.is_enabled		= max14577_reg_is_enabled,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -130,7 +130,7 @@ static const struct regulator_desc max14577_supported_regulators[] = {
 	[MAX14577_CHARGER] = MAX14577_CHARGER_REG,
 };
 
-static struct regulator_ops max77836_ldo_ops = {
+static const struct regulator_ops max77836_ldo_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,

drivers/regulator/max77620-regulator.c

@@ -644,7 +644,7 @@ static int max77620_of_parse_cb(struct device_node *np,
 	return max77620_init_pmic(pmic, desc->id);
 }
 
-static struct regulator_ops max77620_regulator_ops = {
+static const struct regulator_ops max77620_regulator_ops = {
 	.is_enabled = max77620_regulator_is_enabled,
 	.enable = max77620_regulator_enable,
 	.disable = max77620_regulator_disable,

drivers/regulator/max77686-regulator.c

@@ -289,7 +289,7 @@ static int max77686_of_parse_cb(struct device_node *np,
 	return 0;
 }
 
-static struct regulator_ops max77686_ops = {
+static const struct regulator_ops max77686_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -301,7 +301,7 @@ static struct regulator_ops max77686_ops = {
 	.set_suspend_mode	= max77686_set_suspend_mode,
 };
 
-static struct regulator_ops max77686_ldo_ops = {
+static const struct regulator_ops max77686_ldo_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -314,7 +314,7 @@ static struct regulator_ops max77686_ldo_ops = {
 	.set_suspend_disable	= max77686_set_suspend_disable,
 };
 
-static struct regulator_ops max77686_buck1_ops = {
+static const struct regulator_ops max77686_buck1_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -326,7 +326,7 @@ static struct regulator_ops max77686_buck1_ops = {
 	.set_suspend_disable	= max77686_set_suspend_disable,
 };
 
-static struct regulator_ops max77686_buck_dvs_ops = {
+static const struct regulator_ops max77686_buck_dvs_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,

drivers/regulator/max77693-regulator.c

@@ -141,7 +141,7 @@ static const unsigned int max77693_safeout_table[] = {
 	3300000,
 };
 
-static struct regulator_ops max77693_safeout_ops = {
+static const struct regulator_ops max77693_safeout_ops = {
 	.list_voltage		= regulator_list_voltage_table,
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,

drivers/regulator/max77802-regulator.c

@@ -288,7 +288,7 @@ static int max77802_set_ramp_delay_4bit(struct regulator_dev *rdev,
 /*
  * LDOs 2, 4-19, 22-35
  */
-static struct regulator_ops max77802_ldo_ops_logic1 = {
+static const struct regulator_ops max77802_ldo_ops_logic1 = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -304,7 +304,7 @@ static struct regulator_ops max77802_ldo_ops_logic1 = {
 /*
  * LDOs 1, 20, 21, 3
  */
-static struct regulator_ops max77802_ldo_ops_logic2 = {
+static const struct regulator_ops max77802_ldo_ops_logic2 = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -319,7 +319,7 @@ static struct regulator_ops max77802_ldo_ops_logic2 = {
 };
 
 /* BUCKS 1, 6 */
-static struct regulator_ops max77802_buck_16_dvs_ops = {
+static const struct regulator_ops max77802_buck_16_dvs_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -333,7 +333,7 @@ static struct regulator_ops max77802_buck_16_dvs_ops = {
 };
 
 /* BUCKs 2-4 */
-static struct regulator_ops max77802_buck_234_ops = {
+static const struct regulator_ops max77802_buck_234_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -348,7 +348,7 @@ static struct regulator_ops max77802_buck_234_ops = {
 };
 
 /* BUCKs 5, 7-10 */
-static struct regulator_ops max77802_buck_dvs_ops = {
+static const struct regulator_ops max77802_buck_dvs_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,

drivers/regulator/max8907-regulator.c

@@ -109,7 +109,7 @@ struct max8907_regulator {
 #define LDO_650_25(id, supply, base) REG_LDO(id, supply, (base), \
 			650000, 2225000, 25000)
 
-static struct regulator_ops max8907_mbatt_ops = {
+static const struct regulator_ops max8907_mbatt_ops = {
 };
 
 static struct regulator_ops max8907_ldo_ops = {
@@ -121,13 +121,13 @@ static struct regulator_ops max8907_ldo_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 };
 
-static struct regulator_ops max8907_ldo_hwctl_ops = {
+static const struct regulator_ops max8907_ldo_hwctl_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 };
 
-static struct regulator_ops max8907_fixed_ops = {
+static const struct regulator_ops max8907_fixed_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 };
 
@@ -138,11 +138,11 @@ static struct regulator_ops max8907_out5v_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 };
 
-static struct regulator_ops max8907_out5v_hwctl_ops = {
+static const struct regulator_ops max8907_out5v_hwctl_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 };
 
-static struct regulator_ops max8907_bbat_ops = {
+static const struct regulator_ops max8907_bbat_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,

drivers/regulator/max8925-regulator.c

@@ -132,7 +132,7 @@ static int max8925_set_dvm_disable(struct regulator_dev *rdev)
 	return max8925_set_bits(info->i2c, info->vol_reg, 1 << SD1_DVM_EN, 0);
 }
 
-static struct regulator_ops max8925_regulator_sdv_ops = {
+static const struct regulator_ops max8925_regulator_sdv_ops = {
 	.map_voltage		= regulator_map_voltage_linear,
 	.list_voltage		= regulator_list_voltage_linear,
 	.set_voltage_sel	= max8925_set_voltage_sel,
@@ -145,7 +145,7 @@ static struct regulator_ops max8925_regulator_sdv_ops = {
 	.set_suspend_disable	= max8925_set_dvm_disable,
 };
 
-static struct regulator_ops max8925_regulator_ldo_ops = {
+static const struct regulator_ops max8925_regulator_ldo_ops = {
 	.map_voltage		= regulator_map_voltage_linear,
 	.list_voltage		= regulator_list_voltage_linear,
 	.set_voltage_sel	= max8925_set_voltage_sel,

drivers/regulator/max8952.c

@@ -113,7 +113,7 @@ static int max8952_set_voltage_sel(struct regulator_dev *rdev,
 	return 0;
 }
 
-static struct regulator_ops max8952_ops = {
+static const struct regulator_ops max8952_ops = {
 	.list_voltage		= max8952_list_voltage,
 	.get_voltage_sel	= max8952_get_voltage_sel,
 	.set_voltage_sel	= max8952_set_voltage_sel,

drivers/regulator/palmas-regulator.c

@@ -528,7 +528,7 @@ static int palmas_smps_set_ramp_delay(struct regulator_dev *rdev,
 	return ret;
 }
 
-static struct regulator_ops palmas_ops_smps = {
+static const struct regulator_ops palmas_ops_smps = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -542,7 +542,7 @@ static struct regulator_ops palmas_ops_smps = {
 	.set_ramp_delay		= palmas_smps_set_ramp_delay,
 };
 
-static struct regulator_ops palmas_ops_ext_control_smps = {
+static const struct regulator_ops palmas_ops_ext_control_smps = {
 	.set_mode		= palmas_set_mode_smps,
 	.get_mode		= palmas_get_mode_smps,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
@@ -553,7 +553,7 @@ static struct regulator_ops palmas_ops_ext_control_smps = {
 	.set_ramp_delay		= palmas_smps_set_ramp_delay,
 };
 
-static struct regulator_ops palmas_ops_smps10 = {
+static const struct regulator_ops palmas_ops_smps10 = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -565,7 +565,7 @@ static struct regulator_ops palmas_ops_smps10 = {
 	.get_bypass		= regulator_get_bypass_regmap,
 };
 
-static struct regulator_ops tps65917_ops_smps = {
+static const struct regulator_ops tps65917_ops_smps = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -578,7 +578,7 @@ static struct regulator_ops tps65917_ops_smps = {
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
 };
 
-static struct regulator_ops tps65917_ops_ext_control_smps = {
+static const struct regulator_ops tps65917_ops_ext_control_smps = {
 	.set_mode		= palmas_set_mode_smps,
 	.get_mode		= palmas_get_mode_smps,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
@@ -602,7 +602,7 @@ static int palmas_is_enabled_ldo(struct regulator_dev *dev)
 	return !!(reg);
 }
 
-static struct regulator_ops palmas_ops_ldo = {
+static const struct regulator_ops palmas_ops_ldo = {
 	.is_enabled		= palmas_is_enabled_ldo,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -612,7 +612,7 @@ static struct regulator_ops palmas_ops_ldo = {
 	.map_voltage		= regulator_map_voltage_linear,
 };
 
-static struct regulator_ops palmas_ops_ldo9 = {
+static const struct regulator_ops palmas_ops_ldo9 = {
 	.is_enabled		= palmas_is_enabled_ldo,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -624,23 +624,23 @@ static struct regulator_ops palmas_ops_ldo9 = {
 	.get_bypass		= regulator_get_bypass_regmap,
 };
 
-static struct regulator_ops palmas_ops_ext_control_ldo = {
+static const struct regulator_ops palmas_ops_ext_control_ldo = {
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 };
 
-static struct regulator_ops palmas_ops_extreg = {
+static const struct regulator_ops palmas_ops_extreg = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 };
 
-static struct regulator_ops palmas_ops_ext_control_extreg = {
+static const struct regulator_ops palmas_ops_ext_control_extreg = {
 };
 
-static struct regulator_ops tps65917_ops_ldo = {
+static const struct regulator_ops tps65917_ops_ldo = {
 	.is_enabled		= palmas_is_enabled_ldo,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -651,7 +651,7 @@ static struct regulator_ops tps65917_ops_ldo = {
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
 };
 
-static struct regulator_ops tps65917_ops_ldo_1_2 = {
+static const struct regulator_ops tps65917_ops_ldo_1_2 = {
 	.is_enabled		= palmas_is_enabled_ldo,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,

drivers/regulator/pbias-regulator.c

@@ -54,7 +54,7 @@ static const unsigned int pbias_volt_table[] = {
 	3000000
 };
 
-static struct regulator_ops pbias_regulator_voltage_ops = {
+static const struct regulator_ops pbias_regulator_voltage_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,

drivers/regulator/pcap-regulator.c

@@ -210,7 +210,7 @@ static int pcap_regulator_is_enabled(struct regulator_dev *rdev)
 	return (tmp >> vreg->en) & 1;
 }
 
-static struct regulator_ops pcap_regulator_ops = {
+static const struct regulator_ops pcap_regulator_ops = {
 	.list_voltage	= regulator_list_voltage_table,
 	.set_voltage_sel = pcap_regulator_set_voltage_sel,
 	.get_voltage_sel = pcap_regulator_get_voltage_sel,

drivers/regulator/pcf50633-regulator.c

@@ -41,7 +41,7 @@
 		.enable_mask = PCF50633_REGULATOR_ON,		\
 	}
 
-static struct regulator_ops pcf50633_regulator_ops = {
+static const struct regulator_ops pcf50633_regulator_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.list_voltage = regulator_list_voltage_linear,

drivers/regulator/pfuze100-regulator.c

@@ -126,7 +126,7 @@ static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 	return ret;
 }
 
-static struct regulator_ops pfuze100_ldo_regulator_ops = {
+static const struct regulator_ops pfuze100_ldo_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
@@ -135,14 +135,14 @@ static struct regulator_ops pfuze100_ldo_regulator_ops = {
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 };
 
-static struct regulator_ops pfuze100_fixed_regulator_ops = {
+static const struct regulator_ops pfuze100_fixed_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_linear,
 };
 
-static struct regulator_ops pfuze100_sw_regulator_ops = {
+static const struct regulator_ops pfuze100_sw_regulator_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -150,7 +150,7 @@ static struct regulator_ops pfuze100_sw_regulator_ops = {
 	.set_ramp_delay = pfuze100_set_ramp_delay,
 };
 
-static struct regulator_ops pfuze100_swb_regulator_ops = {
+static const struct regulator_ops pfuze100_swb_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.list_voltage = regulator_list_voltage_table,

drivers/regulator/pv88060-regulator.c

@@ -162,7 +162,7 @@ static int pv88060_get_current_limit(struct regulator_dev *rdev)
 	return info->current_limits[data];
 }
 
-static struct regulator_ops pv88060_buck_ops = {
+static const struct regulator_ops pv88060_buck_ops = {
 	.get_mode = pv88060_buck_get_mode,
 	.set_mode = pv88060_buck_set_mode,
 	.enable = regulator_enable_regmap,
@@ -175,7 +175,7 @@ static struct regulator_ops pv88060_buck_ops = {
 	.get_current_limit = pv88060_get_current_limit,
 };
 
-static struct regulator_ops pv88060_ldo_ops = {
+static const struct regulator_ops pv88060_ldo_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,

drivers/regulator/pv88080-regulator.c

@@ -306,7 +306,7 @@ static int pv88080_get_current_limit(struct regulator_dev *rdev)
 	return info->current_limits[data];
 }
 
-static struct regulator_ops pv88080_buck_ops = {
+static const struct regulator_ops pv88080_buck_ops = {
 	.get_mode = pv88080_buck_get_mode,
 	.set_mode = pv88080_buck_set_mode,
 	.enable = regulator_enable_regmap,
@@ -319,7 +319,7 @@ static struct regulator_ops pv88080_buck_ops = {
 	.get_current_limit = pv88080_get_current_limit,
 };
 
-static struct regulator_ops pv88080_hvbuck_ops = {
+static const struct regulator_ops pv88080_hvbuck_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,

drivers/regulator/pv88090-regulator.c

@@ -184,7 +184,7 @@ static int pv88090_get_current_limit(struct regulator_dev *rdev)
 	return info->current_limits[data];
 }
 
-static struct regulator_ops pv88090_buck_ops = {
+static const struct regulator_ops pv88090_buck_ops = {
 	.get_mode = pv88090_buck_get_mode,
 	.set_mode = pv88090_buck_set_mode,
 	.enable = regulator_enable_regmap,
@@ -197,7 +197,7 @@ static struct regulator_ops pv88090_buck_ops = {
 	.get_current_limit = pv88090_get_current_limit,
 };
 
-static struct regulator_ops pv88090_ldo_ops = {
+static const struct regulator_ops pv88090_ldo_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,

drivers/regulator/qcom_smd-regulator.c

@@ -305,6 +305,56 @@ static const struct regulator_desc pm8916_buck_hvo_smps = {
 	.ops = &rpm_smps_ldo_ops,
 };
 
+static const struct regulator_desc pm8994_hfsmps = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE( 375000,  0,  95, 12500),
+		REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000),
+	},
+	.n_linear_ranges = 2,
+	.n_voltages = 159,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8994_ftsmps = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(350000,  0, 199, 5000),
+		REGULATOR_LINEAR_RANGE(700000, 200, 349, 10000),
+	},
+	.n_linear_ranges = 2,
+	.n_voltages = 350,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8994_nldo = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 64,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8994_pldo = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE( 750000,  0,  63, 12500),
+		REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000),
+		REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000),
+	},
+	.n_linear_ranges = 3,
+	.n_voltages = 164,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8994_switch = {
+	.ops = &rpm_switch_ops,
+};
+
+static const struct regulator_desc pm8994_lnldo = {
+	.fixed_uV = 1740000,
+	.n_voltages = 1,
+	.ops = &rpm_smps_ldo_ops_fixed,
+};
+
 struct rpm_regulator_data {
 	const char *name;
 	u32 type;
@@ -443,10 +493,62 @@ static const struct rpm_regulator_data rpm_pma8084_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pm8994_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8994_ftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8994_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm8994_hfsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm8994_hfsmps, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm8994_hfsmps, "vdd_s5" },
+	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pm8994_ftsmps, "vdd_s6" },
+	{ "s7", QCOM_SMD_RPM_SMPA, 7, &pm8994_hfsmps, "vdd_s7" },
+	{ "s8", QCOM_SMD_RPM_SMPA, 8, &pm8994_ftsmps, "vdd_s8" },
+	{ "s9", QCOM_SMD_RPM_SMPA, 9, &pm8994_ftsmps, "vdd_s9" },
+	{ "s10", QCOM_SMD_RPM_SMPA, 10, &pm8994_ftsmps, "vdd_s10" },
+	{ "s11", QCOM_SMD_RPM_SMPA, 11, &pm8994_ftsmps, "vdd_s11" },
+	{ "s12", QCOM_SMD_RPM_SMPA, 12, &pm8994_ftsmps, "vdd_s12" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8994_nldo, "vdd_l1" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8994_nldo, "vdd_l2_l26_l28" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8994_nldo, "vdd_l3_l11" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8994_nldo, "vdd_l4_l27_l31" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8994_lnldo, "vdd_l5_l7" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8994_pldo, "vdd_l6_l12_l32" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8994_lnldo, "vdd_l5_l7" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8994_pldo, "vdd_l8_l16_l30" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8994_pldo, "vdd_l9_l10_l18_l22" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8994_pldo, "vdd_l9_l10_l18_l22" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8994_nldo, "vdd_l3_l11" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8994_pldo, "vdd_l6_l12_l32" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8994_pldo, "vdd_l13_l19_l23_l24" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8994_pldo, "vdd_l14_l15" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8994_pldo, "vdd_l14_l15" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm8994_pldo, "vdd_l8_l16_l30" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8994_pldo, "vdd_l17_l29" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8994_pldo, "vdd_l9_l10_l18_l22" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm8994_pldo, "vdd_l13_l19_l23_l24" },
+	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm8994_pldo, "vdd_l20_l21" },
+	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm8994_pldo, "vdd_l20_l21" },
+	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm8994_pldo, "vdd_l9_l10_l18_l22" },
+	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm8994_pldo, "vdd_l13_l19_l23_l24" },
+	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm8994_pldo, "vdd_l13_l19_l23_l24" },
+	{ "l25", QCOM_SMD_RPM_LDOA, 25, &pm8994_pldo, "vdd_l25" },
+	{ "l26", QCOM_SMD_RPM_LDOA, 26, &pm8994_nldo, "vdd_l2_l26_l28" },
+	{ "l27", QCOM_SMD_RPM_LDOA, 27, &pm8994_nldo, "vdd_l4_l27_l31" },
+	{ "l28", QCOM_SMD_RPM_LDOA, 28, &pm8994_nldo, "vdd_l2_l26_l28" },
+	{ "l29", QCOM_SMD_RPM_LDOA, 29, &pm8994_pldo, "vdd_l17_l29" },
+	{ "l30", QCOM_SMD_RPM_LDOA, 30, &pm8994_pldo, "vdd_l8_l16_l30" },
+	{ "l31", QCOM_SMD_RPM_LDOA, 31, &pm8994_nldo, "vdd_l4_l27_l31" },
+	{ "l32", QCOM_SMD_RPM_LDOA, 32, &pm8994_pldo, "vdd_l6_l12_l32" },
+	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pm8994_switch, "vdd_lvs1_2" },
+	{ "lvs2", QCOM_SMD_RPM_VSA, 2, &pm8994_switch, "vdd_lvs1_2" },
+
+	{}
+};
+
 static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
 	{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
 	{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
+	{ .compatible = "qcom,rpm-pm8994-regulators", .data = &rpm_pm8994_regulators },
 	{ .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators },
 	{}
 };

drivers/regulator/rc5t583-regulator.c

@@ -61,7 +61,7 @@ static int rc5t583_regulator_enable_time(struct regulator_dev *rdev)
 	return DIV_ROUND_UP(curr_uV, reg->reg_info->enable_uv_per_us);
 }
 
-static struct regulator_ops rc5t583_ops = {
+static const struct regulator_ops rc5t583_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,

drivers/regulator/rn5t618-regulator.c

@@ -19,7 +19,7 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/of_regulator.h>
 
-static struct regulator_ops rn5t618_reg_ops = {
+static const struct regulator_ops rn5t618_reg_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,

drivers/regulator/s2mpa01.c

@@ -26,6 +26,7 @@
 #define S2MPA01_REGULATOR_CNT ARRAY_SIZE(regulators)
 
 struct s2mpa01_info {
+	struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX];
 	int ramp_delay24;
 	int ramp_delay3;
 	int ramp_delay5;
@@ -341,9 +342,9 @@ static int s2mpa01_pmic_probe(struct platform_device *pdev)
 {
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
-	struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX] = { };
 	struct device_node *reg_np = NULL;
 	struct regulator_config config = { };
+	struct of_regulator_match *rdata;
 	struct s2mpa01_info *s2mpa01;
 	int i;
 
@@ -351,6 +352,7 @@ static int s2mpa01_pmic_probe(struct platform_device *pdev)
 	if (!s2mpa01)
 		return -ENOMEM;
 
+	rdata = s2mpa01->rdata;
 	for (i = 0; i < S2MPA01_REGULATOR_CNT; i++)
 		rdata[i].name = regulators[i].name;
 

drivers/regulator/tps65086-regulator.c

@@ -157,19 +157,19 @@ static struct tps65086_regulator regulators[] = {
 			   VDOA23_VID_MASK, TPS65086_LDOA3CTRL, BIT(0),
 			   tps65086_ldoa23_ranges, 0, 0),
 	TPS65086_SWITCH("SWA1", "swa1", SWA1, TPS65086_SWVTT_EN, BIT(5)),
-	TPS65086_SWITCH("SWB1", "swa2", SWB1, TPS65086_SWVTT_EN, BIT(6)),
-	TPS65086_SWITCH("SWB2", "swa3", SWB2, TPS65086_SWVTT_EN, BIT(7)),
+	TPS65086_SWITCH("SWB1", "swb1", SWB1, TPS65086_SWVTT_EN, BIT(6)),
+	TPS65086_SWITCH("SWB2", "swb2", SWB2, TPS65086_SWVTT_EN, BIT(7)),
 	TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)),
 };
 
-static int tps65086_of_parse_cb(struct device_node *dev,
+static int tps65086_of_parse_cb(struct device_node *node,
 				const struct regulator_desc *desc,
 				struct regulator_config *config)
 {
 	int ret;
 
 	/* Check for 25mV step mode */
-	if (of_property_read_bool(config->of_node, "ti,regulator-step-size-25mv")) {
+	if (of_property_read_bool(node, "ti,regulator-step-size-25mv")) {
 		switch (desc->id) {
 		case BUCK1:
 		case BUCK2:
@@ -193,7 +193,7 @@ static int tps65086_of_parse_cb(struct device_node *dev,
 	}
 
 	/* Check for decay mode */
-	if (desc->id <= BUCK6 && of_property_read_bool(config->of_node, "ti,regulator-decay")) {
+	if (desc->id <= BUCK6 && of_property_read_bool(node, "ti,regulator-decay")) {
 		ret = regmap_write_bits(config->regmap,
 					regulators[desc->id].decay_reg,
 					regulators[desc->id].decay_mask,

drivers/regulator/tps65217-regulator.c

@@ -179,7 +179,8 @@ static const struct regulator_desc regulators[] = {
 	TPS65217_REGULATOR("DCDC1", TPS65217_DCDC_1, "dcdc1",
 			   tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC1,
 			   TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC1_EN,
-			   NULL, tps65217_uv1_ranges, 2, TPS65217_REG_SEQ1,
+			   NULL, tps65217_uv1_ranges,
+			   ARRAY_SIZE(tps65217_uv1_ranges), TPS65217_REG_SEQ1,
 			   TPS65217_SEQ1_DC1_SEQ_MASK),
 	TPS65217_REGULATOR("DCDC2", TPS65217_DCDC_2, "dcdc2",
 			   tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC2,
@@ -190,7 +191,8 @@ static const struct regulator_desc regulators[] = {
 	TPS65217_REGULATOR("DCDC3", TPS65217_DCDC_3, "dcdc3",
 			   tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC3,
 			   TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC3_EN,
-			   NULL, tps65217_uv1_ranges, 1, TPS65217_REG_SEQ2,
+			   NULL, tps65217_uv1_ranges,
+			   ARRAY_SIZE(tps65217_uv1_ranges), TPS65217_REG_SEQ2,
 			   TPS65217_SEQ2_DC3_SEQ_MASK),
 	TPS65217_REGULATOR("LDO1", TPS65217_LDO_1, "ldo1",
 			   tps65217_pmic_ldo1_ops, 16, TPS65217_REG_DEFLDO1,