Merge tag 'v4.19-rc6' into for-4.20/block

Merge -rc6 in, for two reasons:

1) Resolve a trivial conflict in the blk-mq-tag.c documentation
2) A few important regression fixes went into upstream directly, so
   they aren't in the 4.20 branch.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

* tag 'v4.19-rc6': (780 commits)
  Linux 4.19-rc6
  MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
  cpufreq: qcom-kryo: Fix section annotations
  perf/core: Add sanity check to deal with pinned event failure
  xen/blkfront: correct purging of persistent grants
  Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
  selftests/powerpc: Fix Makefiles for headers_install change
  blk-mq: I/O and timer unplugs are inverted in blktrace
  dax: Fix deadlock in dax_lock_mapping_entry()
  x86/boot: Fix kexec booting failure in the SEV bit detection code
  bcache: add separate workqueue for journal_write to avoid deadlock
  drm/amd/display: Fix Edid emulation for linux
  drm/amd/display: Fix Vega10 lightup on S3 resume
  drm/amdgpu: Fix vce work queue was not cancelled when suspend
  Revert "drm/panel: Add device_link from panel device to DRM device"
  xen/blkfront: When purging persistent grants, keep them in the buffer
  clocksource/drivers/timer-atmel-pit: Properly handle error cases
  block: fix deadline elevator drain for zoned block devices
  ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
  drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
  ...

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Documentation/ABI/stable/sysfs-devices-system-xen_memory

@@ -75,3 +75,12 @@ Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 Description:
 		Amount (in KiB) of low (or normal) memory in the
 		balloon.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/scrub_pages
+Date:		September 2018
+KernelVersion:	4.20
+Contact:	xen-devel@lists.xenproject.org
+Description:
+		Control scrubbing pages before returning them to Xen for others domains
+		use. Can be set with xen_scrub_pages cmdline
+		parameter. Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.

Documentation/admin-guide/kernel-parameters.txt

@@ -3523,6 +3523,12 @@
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
 			See Documentation/blockdev/ramdisk.txt.
 
+	random.trust_cpu={on,off}
+			[KNL] Enable or disable trusting the use of the
+			CPU's random number generator (if available) to
+			fully seed the kernel's CRNG. Default is controlled
+			by CONFIG_RANDOM_TRUST_CPU.
+
 	ras=option[,option,...]	[KNL] RAS-specific options
 
 		cec_disable	[X86]
@@ -4994,6 +5000,12 @@
 			Disables the PV optimizations forcing the HVM guest to
 			run as generic HVM guest with no PV drivers.
 
+	xen_scrub_pages=	[XEN]
+			Boolean option to control scrubbing pages before giving them back
+			to Xen, for use by other domains. Can be also changed at runtime
+			with /sys/devices/system/xen_memory/xen_memory0/scrub_pages.
+			Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
+
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]

Documentation/device-mapper/dm-raid.txt

@@ -348,3 +348,7 @@ Version History
 1.13.1  Fix deadlock caused by early md_stop_writes().  Also fix size an
 	state races.
 1.13.2  Fix raid redundancy validation and avoid keeping raid set frozen
+1.14.0  Fix reshape race on small devices.  Fix stripe adding reshape
+	deadlock/potential data corruption.  Update superblock when
+	specific devices are requested via rebuild.  Fix RAID leg
+	rebuild errors.

Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt

@@ -3,7 +3,6 @@
 Required properties:
 - compatible :
   - "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
-  - "fsl,imx8dv-lpi2c" for LPI2C compatible with the one integrated on i.MX8DV soc
 - reg : address and length of the lpi2c master registers
 - interrupts : lpi2c interrupt
 - clocks : lpi2c clock specifier
@@ -11,7 +10,7 @@ Required properties:
 Examples:
 
 lpi2c7: lpi2c7@40a50000 {
-	compatible = "fsl,imx8dv-lpi2c";
+	compatible = "fsl,imx7ulp-lpi2c";
 	reg = <0x40A50000 0x10000>;
 	interrupt-parent = <&intc>;
 	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/input/gpio-keys.txt

@@ -1,4 +1,4 @@
-Device-Tree bindings for input/gpio_keys.c keyboard driver
+Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver
 
 Required properties:
 	- compatible = "gpio-keys";

Documentation/devicetree/bindings/net/macb.txt

@@ -10,6 +10,7 @@ Required properties:
   Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
   the Cadence GEM, or the generic form: "cdns,gem".
   Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
+  Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs.
   Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
   Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
   Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.

Documentation/filesystems/vfs.txt

@@ -848,7 +848,7 @@ struct file_operations
 ----------------------
 
 This describes how the VFS can manipulate an open file. As of kernel
-4.1, the following members are defined:
+4.18, the following members are defined:
 
 struct file_operations {
 	struct module *owner;
@@ -858,11 +858,11 @@ struct file_operations {
 	ssize_t (*read_iter) (struct kiocb *, struct iov_iter *);
 	ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
 	int (*iterate) (struct file *, struct dir_context *);
+	int (*iterate_shared) (struct file *, struct dir_context *);
 	__poll_t (*poll) (struct file *, struct poll_table_struct *);
 	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
 	long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
 	int (*mmap) (struct file *, struct vm_area_struct *);
-	int (*mremap)(struct file *, struct vm_area_struct *);
 	int (*open) (struct inode *, struct file *);
 	int (*flush) (struct file *, fl_owner_t id);
 	int (*release) (struct inode *, struct file *);
@@ -882,6 +882,10 @@ struct file_operations {
 #ifndef CONFIG_MMU
 	unsigned (*mmap_capabilities)(struct file *);
 #endif
+	ssize_t (*copy_file_range)(struct file *, loff_t, struct file *, loff_t, size_t, unsigned int);
+	int (*clone_file_range)(struct file *, loff_t, struct file *, loff_t, u64);
+	int (*dedupe_file_range)(struct file *, loff_t, struct file *, loff_t, u64);
+	int (*fadvise)(struct file *, loff_t, loff_t, int);
 };
 
 Again, all methods are called without any locks being held, unless
@@ -899,6 +903,9 @@ otherwise noted.
 
   iterate: called when the VFS needs to read the directory contents
 
+  iterate_shared: called when the VFS needs to read the directory contents
+	when filesystem supports concurrent dir iterators
+
   poll: called by the VFS when a process wants to check if there is
 	activity on this file and (optionally) go to sleep until there
 	is activity. Called by the select(2) and poll(2) system calls
@@ -951,6 +958,16 @@ otherwise noted.
 
   fallocate: called by the VFS to preallocate blocks or punch a hole.
 
+  copy_file_range: called by the copy_file_range(2) system call.
+
+  clone_file_range: called by the ioctl(2) system call for FICLONERANGE and
+	FICLONE commands.
+
+  dedupe_file_range: called by the ioctl(2) system call for FIDEDUPERANGE
+	command.
+
+  fadvise: possibly called by the fadvise64() system call.
+
 Note that the file operations are implemented by the specific
 filesystem in which the inode resides. When opening a device node
 (character or block special) most filesystems will call special

Documentation/media/uapi/dvb/video_function_calls.rst

@@ -33,4 +33,3 @@ Video Function Calls
     video-clear-buffer
     video-set-streamtype
     video-set-format
-    video-set-attributes

Documentation/process/changes.rst

@@ -86,7 +86,7 @@ pkg-config
 
 The build system, as of 4.18, requires pkg-config to check for installed
 kconfig tools and to determine flags settings for use in
-'make {menu,n,g,x}config'.  Previously pkg-config was being used but not
+'make {g,x}config'.  Previously pkg-config was being used but not
 verified or documented.
 
 Flex

Documentation/process/code-of-conduct.rst

@@ -0,0 +1,81 @@
+Contributor Covenant Code of Conduct
+++++++++++++++++++++++++++++++++++++
+
+Our Pledge
+==========
+
+In the interest of fostering an open and welcoming environment, we as
+contributors and maintainers pledge to making participation in our project and
+our community a harassment-free experience for everyone, regardless of age, body
+size, disability, ethnicity, sex characteristics, gender identity and
+expression, level of experience, education, socio-economic status, nationality,
+personal appearance, race, religion, or sexual identity and orientation.
+
+Our Standards
+=============
+
+Examples of behavior that contributes to creating a positive environment
+include:
+
+* Using welcoming and inclusive language
+* Being respectful of differing viewpoints and experiences
+* Gracefully accepting constructive criticism
+* Focusing on what is best for the community
+* Showing empathy towards other community members
+
+
+Examples of unacceptable behavior by participants include:
+
+* The use of sexualized language or imagery and unwelcome sexual attention or
+  advances
+* Trolling, insulting/derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others’ private information, such as a physical or electronic
+  address, without explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+
+Our Responsibilities
+====================
+
+Maintainers are responsible for clarifying the standards of acceptable behavior
+and are expected to take appropriate and fair corrective action in response to
+any instances of unacceptable behavior.
+
+Maintainers have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, or to ban temporarily or permanently any
+contributor for other behaviors that they deem inappropriate, threatening,
+offensive, or harmful.
+
+Scope
+=====
+
+This Code of Conduct applies both within project spaces and in public spaces
+when an individual is representing the project or its community. Examples of
+representing a project or community include using an official project e-mail
+address, posting via an official social media account, or acting as an appointed
+representative at an online or offline event. Representation of a project may be
+further defined and clarified by project maintainers.
+
+Enforcement
+===========
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported by contacting the Technical Advisory Board (TAB) at
+<tab@lists.linux-foundation.org>. All complaints will be reviewed and
+investigated and will result in a response that is deemed necessary and
+appropriate to the circumstances. The TAB is obligated to maintain
+confidentiality with regard to the reporter of an incident.  Further details of
+specific enforcement policies may be posted separately.
+
+Maintainers who do not follow or enforce the Code of Conduct in good faith may
+face temporary or permanent repercussions as determined by other members of the
+project’s leadership.
+
+Attribution
+===========
+
+This Code of Conduct is adapted from the Contributor Covenant, version 1.4,
+available at https://www.contributor-covenant.org/version/1/4/code-of-conduct.html

Documentation/process/code-of-conflict.rst

@@ -1,28 +0,0 @@
-Code of Conflict
-----------------
-
-The Linux kernel development effort is a very personal process compared
-to "traditional" ways of developing software.  Your code and ideas
-behind it will be carefully reviewed, often resulting in critique and
-criticism.  The review will almost always require improvements to the
-code before it can be included in the kernel.  Know that this happens
-because everyone involved wants to see the best possible solution for
-the overall success of Linux.  This development process has been proven
-to create the most robust operating system kernel ever, and we do not
-want to do anything to cause the quality of submission and eventual
-result to ever decrease.
-
-If however, anyone feels personally abused, threatened, or otherwise
-uncomfortable due to this process, that is not acceptable.  If so,
-please contact the Linux Foundation's Technical Advisory Board at
-<tab@lists.linux-foundation.org>, or the individual members, and they
-will work to resolve the issue to the best of their ability.  For more
-information on who is on the Technical Advisory Board and what their
-role is, please see:
-
-	- http://www.linuxfoundation.org/projects/linux/tab
-
-As a reviewer of code, please strive to keep things civil and focused on
-the technical issues involved.  We are all humans, and frustrations can
-be high on both sides of the process.  Try to keep in mind the immortal
-words of Bill and Ted, "Be excellent to each other."

Documentation/process/index.rst

@@ -20,7 +20,7 @@ Below are the essential guides that every developer should read.
    :maxdepth: 1
 
    howto
-   code-of-conflict
+   code-of-conduct
    development-process
    submitting-patches
    coding-style

Documentation/virtual/kvm/api.txt

@@ -4510,7 +4510,8 @@ Do not enable KVM_FEATURE_PV_UNHALT if you disable HLT exits.
 Architectures: s390
 Parameters: none
 Returns: 0 on success, -EINVAL if hpage module parameter was not set
-	 or cmma is enabled
+	 or cmma is enabled, or the VM has the KVM_VM_S390_UCONTROL
+	 flag set
 
 With this capability the KVM support for memory backing with 1m pages
 through hugetlbfs can be enabled for a VM. After the capability is
@@ -4521,6 +4522,15 @@ hpage module parameter is not set to 1, -EINVAL is returned.
 While it is generally possible to create a huge page backed VM without
 this capability, the VM will not be able to run.
 
+7.14 KVM_CAP_MSR_PLATFORM_INFO
+
+Architectures: x86
+Parameters: args[0] whether feature should be enabled or not
+
+With this capability, a guest may read the MSR_PLATFORM_INFO MSR. Otherwise,
+a #GP would be raised when the guest tries to access. Currently, this
+capability does not enable write permissions of this MSR for the guest.
+
 8. Other capabilities.
 ----------------------
 

Documentation/x86/earlyprintk.txt

@@ -35,25 +35,25 @@ and two USB cables, connected like this:
 ( If your system does not list a debug port capability then you probably
   won't be able to use the USB debug key. )
 
- b.) You also need a Netchip USB debug cable/key:
+ b.) You also need a NetChip USB debug cable/key:
 
         http://www.plxtech.com/products/NET2000/NET20DC/default.asp
 
-     This is a small blue plastic connector with two USB connections,
+     This is a small blue plastic connector with two USB connections;
      it draws power from its USB connections.
 
  c.) You need a second client/console system with a high speed USB 2.0
      port.
 
- d.) The Netchip device must be plugged directly into the physical
+ d.) The NetChip device must be plugged directly into the physical
      debug port on the "host/target" system.  You cannot use a USB hub in
      between the physical debug port and the "host/target" system.
 
      The EHCI debug controller is bound to a specific physical USB
-     port and the Netchip device will only work as an early printk
+     port and the NetChip device will only work as an early printk
      device in this port.  The EHCI host controllers are electrically
      wired such that the EHCI debug controller is hooked up to the
-     first physical and there is no way to change this via software.
+     first physical port and there is no way to change this via software.
      You can find the physical port through experimentation by trying
      each physical port on the system and rebooting.  Or you can try
      and use lsusb or look at the kernel info messages emitted by the
@@ -65,9 +65,9 @@ and two USB cables, connected like this:
      to the hardware vendor, because there is no reason not to wire
      this port into one of the physically accessible ports.
 
- e.) It is also important to note, that many versions of the Netchip
+ e.) It is also important to note, that many versions of the NetChip
      device require the "client/console" system to be plugged into the
-     right and side of the device (with the product logo facing up and
+     right hand side of the device (with the product logo facing up and
      readable left to right).  The reason being is that the 5 volt
      power supply is taken from only one side of the device and it
      must be the side that does not get rebooted.
@@ -81,13 +81,18 @@ and two USB cables, connected like this:
       CONFIG_EARLY_PRINTK_DBGP=y
 
     And you need to add the boot command line: "earlyprintk=dbgp".
+
     (If you are using Grub, append it to the 'kernel' line in
-     /etc/grub.conf)
+     /etc/grub.conf.  If you are using Grub2 on a BIOS firmware system,
+     append it to the 'linux' line in /boot/grub2/grub.cfg. If you are
+     using Grub2 on an EFI firmware system, append it to the 'linux'
+     or 'linuxefi' line in /boot/grub2/grub.cfg or
+     /boot/efi/EFI/<distro>/grub.cfg.)
 
     On systems with more than one EHCI debug controller you must
     specify the correct EHCI debug controller number.  The ordering
     comes from the PCI bus enumeration of the EHCI controllers.  The
-    default with no number argument is "0" the first EHCI debug
+    default with no number argument is "0" or the first EHCI debug
     controller.  To use the second EHCI debug controller, you would
     use the command line: "earlyprintk=dbgp1"
 
@@ -111,7 +116,7 @@ and two USB cables, connected like this:
     see the raw output.
 
  c.) On Nvidia Southbridge based systems: the kernel will try to probe
-     and find out which port has debug device connected.
+     and find out which port has a debug device connected.
 
 3. Testing that it works fine:
 

MAINTAINERS

@@ -2311,6 +2311,7 @@ F:	drivers/clocksource/cadence_ttc_timer.c
 F:	drivers/i2c/busses/i2c-cadence.c
 F:	drivers/mmc/host/sdhci-of-arasan.c
 F:	drivers/edac/synopsys_edac.c
+F:	drivers/i2c/busses/i2c-xiic.c
 
 ARM64 PORT (AARCH64 ARCHITECTURE)
 M:	Catalin Marinas <catalin.marinas@arm.com>
@@ -5624,6 +5625,8 @@ F:	lib/fault-inject.c
 
 FBTFT Framebuffer drivers
 M:	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+L:	dri-devel@lists.freedesktop.org
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/staging/fbtft/
 
@@ -6059,7 +6062,7 @@ F:	Documentation/gcc-plugins.txt
 
 GASKET DRIVER FRAMEWORK
 M:	Rob Springer <rspringer@google.com>
-M:	John Joseph <jnjoseph@google.com>
+M:	Todd Poynor <toddpoynor@google.com>
 M:	Ben Chan <benchan@chromium.org>
 S:	Maintained
 F:	drivers/staging/gasket/
@@ -7015,6 +7018,20 @@ F:	drivers/crypto/vmx/aes*
 F:	drivers/crypto/vmx/ghash*
 F:	drivers/crypto/vmx/ppc-xlate.pl
 
+IBM Power PCI Hotplug Driver for RPA-compliant PPC64 platform
+M:	Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
+L:	linux-pci@vger.kernel.org
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Supported
+F:	drivers/pci/hotplug/rpaphp*
+
+IBM Power IO DLPAR Driver for RPA-compliant PPC64 platform
+M:	Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
+L:	linux-pci@vger.kernel.org
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Supported
+F:	drivers/pci/hotplug/rpadlpar*
+
 IBM ServeRAID RAID DRIVER
 S:	Orphan
 F:	drivers/scsi/ips.*
@@ -8299,7 +8316,7 @@ F:	include/linux/libata.h
 F:	Documentation/devicetree/bindings/ata/
 
 LIBLOCKDEP
-M:	Sasha Levin <alexander.levin@verizon.com>
+M:	Sasha Levin <alexander.levin@microsoft.com>
 S:	Maintained
 F:	tools/lib/lockdep/
 
@@ -9699,13 +9716,6 @@ Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 S:	Maintained
 F:	drivers/media/dvb-frontends/mn88473*
 
-PCI DRIVER FOR MOBIVEIL PCIE IP
-M:	Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
-L:	linux-pci@vger.kernel.org
-S:	Supported
-F:	Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
-F:	drivers/pci/controller/pcie-mobiveil.c
-
 MODULE SUPPORT
 M:	Jessica Yu <jeyu@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next
@@ -10932,7 +10942,7 @@ M:	Willy Tarreau <willy@haproxy.com>
 M:	Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
 S:	Odd Fixes
 F:	Documentation/auxdisplay/lcd-panel-cgram.txt
-F:	drivers/misc/panel.c
+F:	drivers/auxdisplay/panel.c
 
 PARALLEL PORT SUBSYSTEM
 M:	Sudip Mukherjee <sudipm.mukherjee@gmail.com>
@@ -11120,6 +11130,13 @@ F:	include/uapi/linux/switchtec_ioctl.h
 F:	include/linux/switchtec.h
 F:	drivers/ntb/hw/mscc/
 
+PCI DRIVER FOR MOBIVEIL PCIE IP
+M:	Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
+L:	linux-pci@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
+F:	drivers/pci/controller/pcie-mobiveil.c
+
 PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
 M:	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 M:	Jason Cooper <jason@lakedaemon.net>
@@ -11153,7 +11170,7 @@ F:	drivers/pci/controller/dwc/pci-exynos.c
 
 PCI DRIVER FOR SYNOPSYS DESIGNWARE
 M:	Jingoo Han <jingoohan1@gmail.com>
-M:	Joao Pinto <Joao.Pinto@synopsys.com>
+M:	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -11186,8 +11203,14 @@ F:	tools/pci/
 
 PCI ENHANCED ERROR HANDLING (EEH) FOR POWERPC
 M:	Russell Currey <ruscur@russell.cc>
+M:	Sam Bobroff <sbobroff@linux.ibm.com>
+M:	Oliver O'Halloran <oohall@gmail.com>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
+F:	Documentation/PCI/pci-error-recovery.txt
+F:	drivers/pci/pcie/aer.c
+F:	drivers/pci/pcie/dpc.c
+F:	drivers/pci/pcie/err.c
 F:	Documentation/powerpc/eeh-pci-error-recovery.txt
 F:	arch/powerpc/kernel/eeh*.c
 F:	arch/powerpc/platforms/*/eeh*.c
@@ -11345,10 +11368,10 @@ S:	Maintained
 F:	drivers/platform/x86/peaq-wmi.c
 
 PER-CPU MEMORY ALLOCATOR
+M:	Dennis Zhou <dennis@kernel.org>
 M:	Tejun Heo <tj@kernel.org>
 M:	Christoph Lameter <cl@linux.com>
-M:	Dennis Zhou <dennisszhou@gmail.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu.git
 S:	Maintained
 F:	include/linux/percpu*.h
 F:	mm/percpu*.c
@@ -12243,6 +12266,7 @@ F:	Documentation/networking/rds.txt
 
 RDT - RESOURCE ALLOCATION
 M:	Fenghua Yu <fenghua.yu@intel.com>
+M:	Reinette Chatre <reinette.chatre@intel.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	arch/x86/kernel/cpu/intel_rdt*
@@ -13432,9 +13456,8 @@ F:	drivers/i2c/busses/i2c-synquacer.c
 F:	Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
 
 SOCIONEXT UNIPHIER SOUND DRIVER
-M:	Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-S:	Maintained
+S:	Orphan
 F:	sound/soc/uniphier/
 
 SOEKRIS NET48XX LED SUPPORT
@@ -15896,6 +15919,7 @@ F:	net/x25/
 X86 ARCHITECTURE (32-BIT AND 64-BIT)
 M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Ingo Molnar <mingo@redhat.com>
+M:	Borislav Petkov <bp@alien8.de>
 R:	"H. Peter Anvin" <hpa@zytor.com>
 M:	x86@kernel.org
 L:	linux-kernel@vger.kernel.org
@@ -15924,6 +15948,15 @@ M:	Borislav Petkov <bp@alien8.de>
 S:	Maintained
 F:	arch/x86/kernel/cpu/microcode/*
 
+X86 MM
+M:	Dave Hansen <dave.hansen@linux.intel.com>
+M:	Andy Lutomirski <luto@kernel.org>
+M:	Peter Zijlstra <peterz@infradead.org>
+L:	linux-kernel@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/mm
+S:	Maintained
+F:	arch/x86/mm/
+
 X86 PLATFORM DRIVERS
 M:	Darren Hart <dvhart@infradead.org>
 M:	Andy Shevchenko <andy@infradead.org>

Makefile

@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 19
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc6
 NAME = Merciless Moray
 
 # *DOCUMENTATION*
@@ -299,19 +299,7 @@ KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 
-# SUBARCH tells the usermode build what the underlying arch is.  That is set
-# first, and if a usermode build is happening, the "ARCH=um" on the command
-# line overrides the setting of ARCH below.  If a native build is happening,
-# then ARCH is assigned, getting whatever value it gets normally, and
-# SUBARCH is subsequently ignored.
-
-SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
-				  -e s/sun4u/sparc64/ \
-				  -e s/arm.*/arm/ -e s/sa110/arm/ \
-				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
-				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-				  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ \
-				  -e s/riscv.*/riscv/)
+include scripts/subarch.include
 
 # Cross compiling and selecting different set of gcc/bin-utils
 # ---------------------------------------------------------------------------
@@ -616,6 +604,11 @@ CFLAGS_GCOV	:= -fprofile-arcs -ftest-coverage \
 	$(call cc-disable-warning,maybe-uninitialized,)
 export CFLAGS_GCOV
 
+# The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later.
+ifdef CONFIG_FUNCTION_TRACER
+  CC_FLAGS_FTRACE := -pg
+endif
+
 # The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
 # values of the respective KBUILD_* variables
 ARCH_CPPFLAGS :=
@@ -755,9 +748,6 @@ KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly) \
 endif
 
 ifdef CONFIG_FUNCTION_TRACER
-ifndef CC_FLAGS_FTRACE
-CC_FLAGS_FTRACE := -pg
-endif
 ifdef CONFIG_FTRACE_MCOUNT_RECORD
   # gcc 5 supports generating the mcount tables directly
   ifeq ($(call cc-option-yn,-mrecord-mcount),y)

arch/arc/Kconfig

@@ -9,6 +9,7 @@
 config ARC
 	def_bool y
 	select ARC_TIMERS
+	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_HAS_SG_CHAIN
@@ -28,8 +29,12 @@ config ARC
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_FUTEX_CMPXCHG if FUTEX
+	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IOREMAP_PROT
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_LZMA
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_MEMBLOCK
@@ -44,11 +49,6 @@ config ARC
 	select OF_EARLY_FLATTREE
 	select OF_RESERVED_MEM
 	select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
-	select HAVE_DEBUG_STACKOVERFLOW
-	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_KERNEL_GZIP
-	select HAVE_KERNEL_LZMA
-	select ARCH_HAS_PTE_SPECIAL
 
 config ARCH_HAS_CACHE_LINE_SIZE
 	def_bool y

arch/arc/Makefile

@@ -43,10 +43,7 @@ ifdef CONFIG_ARC_CURR_IN_REG
 LINUXINCLUDE	+=  -include ${src}/arch/arc/include/asm/current.h
 endif
 
-upto_gcc44    :=  $(call cc-ifversion, -le, 0404, y)
-atleast_gcc44 :=  $(call cc-ifversion, -ge, 0404, y)
-
-cflags-$(atleast_gcc44)			+= -fsection-anchors
+cflags-y				+= -fsection-anchors
 
 cflags-$(CONFIG_ARC_HAS_LLSC)		+= -mlock
 cflags-$(CONFIG_ARC_HAS_SWAPE)		+= -mswape
@@ -82,11 +79,6 @@ cflags-$(disable_small_data)		+= -mno-sdata -fcall-used-gp
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mbig-endian
 ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB
 
-# STAR 9000518362: (fixed with binutils shipping with gcc 4.8)
-# arc-linux-uclibc-ld (buildroot) or arceb-elf32-ld (EZChip) don't accept
-# --build-id w/o "-marclinux". Default arc-elf32-ld is OK
-ldflags-$(upto_gcc44)			+= -marclinux
-
 LIBGCC	:= $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
 
 # Modules with short calls might break for calls into builtin-kernel

arch/arc/boot/dts/axc003.dtsi

@@ -93,6 +93,32 @@
 		};
 	};
 
+	/*
+	 * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+	 * it via overlay because peripherals defined in axs10x_mb.dtsi are
+	 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+	 * only AXS103 board has HW-coherent DMA peripherals)
+	 * We don't need to mark pgu@17000 as dma-coherent because it uses
+	 * external DMA buffer located outside of IOC aperture.
+	 */
+	axs10x_mb {
+		ethernet@0x18000 {
+			dma-coherent;
+		};
+
+		ehci@0x40000 {
+			dma-coherent;
+		};
+
+		ohci@0x60000 {
+			dma-coherent;
+		};
+
+		mmc@0x15000 {
+			dma-coherent;
+		};
+	};
+
 	/*
 	 * The DW APB ICTL intc on MB is connected to CPU intc via a
 	 * DT "invisible" DW APB GPIO block, configured to simply pass thru

arch/arc/boot/dts/axc003_idu.dtsi

@@ -100,6 +100,32 @@
 		};
 	};
 
+	/*
+	 * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+	 * it via overlay because peripherals defined in axs10x_mb.dtsi are
+	 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+	 * only AXS103 board has HW-coherent DMA peripherals)
+	 * We don't need to mark pgu@17000 as dma-coherent because it uses
+	 * external DMA buffer located outside of IOC aperture.
+	 */
+	axs10x_mb {
+		ethernet@0x18000 {
+			dma-coherent;
+		};
+
+		ehci@0x40000 {
+			dma-coherent;
+		};
+
+		ohci@0x60000 {
+			dma-coherent;
+		};
+
+		mmc@0x15000 {
+			dma-coherent;
+		};
+	};
+
 	/*
 	 * This INTC is actually connected to DW APB GPIO
 	 * which acts as a wire between MB INTC and CPU INTC.

arch/arc/boot/dts/axs10x_mb.dtsi

@@ -9,6 +9,10 @@
  */
 
 / {
+	aliases {
+		ethernet = &gmac;
+	};
+
 	axs10x_mb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -68,7 +72,7 @@
 			};
 		};
 
-		ethernet@0x18000 {
+		gmac: ethernet@0x18000 {
 			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = < 0x18000 0x2000 >;
@@ -81,6 +85,7 @@
 			max-speed = <100>;
 			resets = <&creg_rst 5>;
 			reset-names = "stmmaceth";
+			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 		};
 
 		ehci@0x40000 {

arch/arc/boot/dts/hsdk.dts

@@ -25,6 +25,10 @@
 		bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
 	};
 
+	aliases {
+		ethernet = &gmac;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -163,7 +167,7 @@
 			#clock-cells = <0>;
 		};
 
-		ethernet@8000 {
+		gmac: ethernet@8000 {
 			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = <0x8000 0x2000>;
@@ -176,6 +180,8 @@
 			phy-handle = <&phy0>;
 			resets = <&cgu_rst HSDK_ETH_RESET>;
 			reset-names = "stmmaceth";
+			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
+			dma-coherent;
 
 			mdio {
 				#address-cells = <1>;
@@ -194,12 +200,14 @@
 			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
 			reg = <0x60000 0x100>;
 			interrupts = <15>;
+			dma-coherent;
 		};
 
 		ehci@40000 {
 			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
 			reg = <0x40000 0x100>;
 			interrupts = <15>;
+			dma-coherent;
 		};
 
 		mmc@a000 {
@@ -212,6 +220,7 @@
 			clock-names = "biu", "ciu";
 			interrupts = <12>;
 			bus-width = <4>;
+			dma-coherent;
 		};
 	};
 

arch/arc/configs/axs101_defconfig

@@ -1,5 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@@ -63,7 +61,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 CONFIG_MOUSE_SERIAL=y
 CONFIG_MOUSE_SYNAPTICS_USB=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y

arch/arc/configs/axs103_defconfig

@@ -1,5 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@@ -64,7 +62,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 CONFIG_MOUSE_SERIAL=y
 CONFIG_MOUSE_SYNAPTICS_USB=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y

arch/arc/configs/axs103_smp_defconfig

@@ -1,5 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@@ -65,7 +63,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 CONFIG_MOUSE_SERIAL=y
 CONFIG_MOUSE_SYNAPTICS_USB=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y

arch/arc/configs/haps_hs_defconfig

@@ -1,4 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -57,7 +56,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1

arch/arc/configs/haps_hs_smp_defconfig

@@ -1,4 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -60,7 +59,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1

arch/arc/configs/hsdk_defconfig

@@ -1,4 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 CONFIG_SYSVIPC=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NO_HZ_IDLE=y

arch/arc/configs/nps_defconfig

@@ -59,7 +59,6 @@ CONFIG_NETCONSOLE=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1

arch/arc/configs/nsim_700_defconfig

@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -44,7 +43,6 @@ CONFIG_LXT_PHY=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set

arch/arc/configs/nsim_hs_defconfig

@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -45,7 +44,6 @@ CONFIG_DEVTMPFS=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set

arch/arc/configs/nsim_hs_smp_defconfig

@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 # CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -44,7 +43,6 @@ CONFIG_DEVTMPFS=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set

arch/arc/configs/nsimosci_defconfig

@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@@ -48,7 +47,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1

arch/arc/configs/nsimosci_hs_defconfig

@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@@ -47,7 +46,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1

arch/arc/configs/nsimosci_hs_smp_defconfig

@@ -1,4 +1,3 @@
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@@ -58,7 +57,6 @@ CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1

arch/arc/configs/tb10x_defconfig

@@ -57,7 +57,6 @@ CONFIG_STMMAC_ETH=y
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1

arch/arc/configs/vdk_hs38_defconfig

@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -53,7 +52,6 @@ CONFIG_NATIONAL_PHY=y
 CONFIG_MOUSE_PS2_TOUCHKIT=y
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y

arch/arc/configs/vdk_hs38_smp_defconfig

@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y

arch/arc/include/asm/atomic.h

@@ -84,7 +84,7 @@ static inline int atomic_fetch_##op(int i, atomic_t *v)			\
 	"1:	llock   %[orig], [%[ctr]]		\n"		\
 	"	" #asm_op " %[val], %[orig], %[i]	\n"		\
 	"	scond   %[val], [%[ctr]]		\n"		\
-	"						\n"		\
+	"	bnz     1b				\n"		\
 	: [val]	"=&r"	(val),						\
 	  [orig] "=&r" (orig)						\
 	: [ctr]	"r"	(&v->counter),					\

arch/arc/include/asm/dma-mapping.h

@@ -0,0 +1,13 @@
+// SPDX-License-Identifier:  GPL-2.0
+// (C) 2018 Synopsys, Inc. (www.synopsys.com)
+
+#ifndef ASM_ARC_DMA_MAPPING_H
+#define ASM_ARC_DMA_MAPPING_H
+
+#include <asm-generic/dma-mapping.h>
+
+void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+			const struct iommu_ops *iommu, bool coherent);
+#define arch_setup_dma_ops arch_setup_dma_ops
+
+#endif

arch/arc/kernel/troubleshoot.c

@@ -83,9 +83,6 @@ done:
 static void show_faulting_vma(unsigned long address, char *buf)
 {
 	struct vm_area_struct *vma;
-	struct inode *inode;
-	unsigned long ino = 0;
-	dev_t dev = 0;
 	char *nm = buf;
 	struct mm_struct *active_mm = current->active_mm;
 
@@ -99,12 +96,10 @@ static void show_faulting_vma(unsigned long address, char *buf)
 	 * if the container VMA is not found
 	 */
 	if (vma && (vma->vm_start <= address)) {
-		struct file *file = vma->vm_file;
-		if (file) {
-			nm = file_path(file, buf, PAGE_SIZE - 1);
-			inode = file_inode(vma->vm_file);
-			dev = inode->i_sb->s_dev;
-			ino = inode->i_ino;
+		if (vma->vm_file) {
+			nm = file_path(vma->vm_file, buf, PAGE_SIZE - 1);
+			if (IS_ERR(nm))
+				nm = "?";
 		}
 		pr_info("    @off 0x%lx in [%s]\n"
 			"    VMA: 0x%08lx to 0x%08lx\n",

arch/arc/mm/cache.c

@@ -65,7 +65,7 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len)
 
 	n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n",
 		       perip_base,
-		       IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency "));
+		       IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency (per-device) "));
 
 	return buf;
 }
@@ -896,15 +896,6 @@ static void __dma_cache_wback_slc(phys_addr_t start, unsigned long sz)
 	slc_op(start, sz, OP_FLUSH);
 }
 
-/*
- * DMA ops for systems with IOC
- * IOC hardware snoops all DMA traffic keeping the caches consistent with
- * memory - eliding need for any explicit cache maintenance of DMA buffers
- */
-static void __dma_cache_wback_inv_ioc(phys_addr_t start, unsigned long sz) {}
-static void __dma_cache_inv_ioc(phys_addr_t start, unsigned long sz) {}
-static void __dma_cache_wback_ioc(phys_addr_t start, unsigned long sz) {}
-
 /*
  * Exported DMA API
  */
@@ -1153,6 +1144,19 @@ noinline void __init arc_ioc_setup(void)
 {
 	unsigned int ioc_base, mem_sz;
 
+	/*
+	 * As for today we don't support both IOC and ZONE_HIGHMEM enabled
+	 * simultaneously. This happens because as of today IOC aperture covers
+	 * only ZONE_NORMAL (low mem) and any dma transactions outside this
+	 * region won't be HW coherent.
+	 * If we want to use both IOC and ZONE_HIGHMEM we can use
+	 * bounce_buffer to handle dma transactions to HIGHMEM.
+	 * Also it is possible to modify dma_direct cache ops or increase IOC
+	 * aperture size if we are planning to use HIGHMEM without PAE.
+	 */
+	if (IS_ENABLED(CONFIG_HIGHMEM))
+		panic("IOC and HIGHMEM can't be used simultaneously");
+
 	/* Flush + invalidate + disable L1 dcache */
 	__dc_disable();
 
@@ -1264,11 +1268,7 @@ void __init arc_cache_init_master(void)
 	if (is_isa_arcv2() && ioc_enable)
 		arc_ioc_setup();
 
-	if (is_isa_arcv2() && ioc_enable) {
-		__dma_cache_wback_inv = __dma_cache_wback_inv_ioc;
-		__dma_cache_inv = __dma_cache_inv_ioc;
-		__dma_cache_wback = __dma_cache_wback_ioc;
-	} else if (is_isa_arcv2() && l2_line_sz && slc_enable) {
+	if (is_isa_arcv2() && l2_line_sz && slc_enable) {
 		__dma_cache_wback_inv = __dma_cache_wback_inv_slc;
 		__dma_cache_inv = __dma_cache_inv_slc;
 		__dma_cache_wback = __dma_cache_wback_slc;
@@ -1277,6 +1277,12 @@ void __init arc_cache_init_master(void)
 		__dma_cache_inv = __dma_cache_inv_l1;
 		__dma_cache_wback = __dma_cache_wback_l1;
 	}
+	/*
+	 * In case of IOC (say IOC+SLC case), pointers above could still be set
+	 * but end up not being relevant as the first function in chain is not
+	 * called at all for @dma_direct_ops
+	 *     arch_sync_dma_for_cpu() -> dma_cache_*() -> __dma_cache_*()
+	 */
 }
 
 void __ref arc_cache_init(void)

arch/arc/mm/dma.c

@@ -6,20 +6,17 @@
  * published by the Free Software Foundation.
  */
 
-/*
- * DMA Coherent API Notes
- *
- * I/O is inherently non-coherent on ARC. So a coherent DMA buffer is
- * implemented by accessing it using a kernel virtual address, with
- * Cache bit off in the TLB entry.
- *
- * The default DMA address == Phy address which is 0x8000_0000 based.
- */
-
 #include <linux/dma-noncoherent.h>
 #include <asm/cache.h>
 #include <asm/cacheflush.h>
 
+/*
+ * ARCH specific callbacks for generic noncoherent DMA ops (dma/noncoherent.c)
+ *  - hardware IOC not available (or "dma-coherent" not set for device in DT)
+ *  - But still handle both coherent and non-coherent requests from caller
+ *
+ * For DMA coherent hardware (IOC) generic code suffices
+ */
 void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		gfp_t gfp, unsigned long attrs)
 {
@@ -27,42 +24,29 @@ void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	struct page *page;
 	phys_addr_t paddr;
 	void *kvaddr;
-	int need_coh = 1, need_kvaddr = 0;
-
-	page = alloc_pages(gfp, order);
-	if (!page)
-		return NULL;
+	bool need_coh = !(attrs & DMA_ATTR_NON_CONSISTENT);
 
 	/*
-	 * IOC relies on all data (even coherent DMA data) being in cache
-	 * Thus allocate normal cached memory
-	 *
-	 * The gains with IOC are two pronged:
-	 *   -For streaming data, elides need for cache maintenance, saving
-	 *    cycles in flush code, and bus bandwidth as all the lines of a
-	 *    buffer need to be flushed out to memory
-	 *   -For coherent data, Read/Write to buffers terminate early in cache
-	 *   (vs. always going to memory - thus are faster)
+	 * __GFP_HIGHMEM flag is cleared by upper layer functions
+	 * (in include/linux/dma-mapping.h) so we should never get a
+	 * __GFP_HIGHMEM here.
 	 */
-	if ((is_isa_arcv2() && ioc_enable) ||
-	    (attrs & DMA_ATTR_NON_CONSISTENT))
-		need_coh = 0;
+	BUG_ON(gfp & __GFP_HIGHMEM);
 
-	/*
-	 * - A coherent buffer needs MMU mapping to enforce non-cachability
-	 * - A highmem page needs a virtual handle (hence MMU mapping)
-	 *   independent of cachability
-	 */
-	if (PageHighMem(page) || need_coh)
-		need_kvaddr = 1;
+	page = alloc_pages(gfp, order);
+	if (!page)
+		return NULL;
 
 	/* This is linear addr (0x8000_0000 based) */
 	paddr = page_to_phys(page);
 
 	*dma_handle = paddr;
 
-	/* This is kernel Virtual address (0x7000_0000 based) */
-	if (need_kvaddr) {
+	/*
+	 * A coherent buffer needs MMU mapping to enforce non-cachability.
+	 * kvaddr is kernel Virtual address (0x7000_0000 based).
+	 */
+	if (need_coh) {
 		kvaddr = ioremap_nocache(paddr, size);
 		if (kvaddr == NULL) {
 			__free_pages(page, order);
@@ -93,12 +77,8 @@ void arch_dma_free(struct device *dev, size_t size, void *vaddr,
 {
 	phys_addr_t paddr = dma_handle;
 	struct page *page = virt_to_page(paddr);
-	int is_non_coh = 1;
-
-	is_non_coh = (attrs & DMA_ATTR_NON_CONSISTENT) ||
-			(is_isa_arcv2() && ioc_enable);
 
-	if (PageHighMem(page) || !is_non_coh)
+	if (!(attrs & DMA_ATTR_NON_CONSISTENT))
 		iounmap((void __force __iomem *)vaddr);
 
 	__free_pages(page, get_order(size));
@@ -185,3 +165,23 @@ void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
 		break;
 	}
 }
+
+/*
+ * Plug in coherent or noncoherent dma ops
+ */
+void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+			const struct iommu_ops *iommu, bool coherent)
+{
+	/*
+	 * IOC hardware snoops all DMA traffic keeping the caches consistent
+	 * with memory - eliding need for any explicit cache maintenance of
+	 * DMA buffers - so we can use dma_direct cache ops.
+	 */
+	if (is_isa_arcv2() && ioc_enable && coherent) {
+		set_dma_ops(dev, &dma_direct_ops);
+		dev_info(dev, "use dma_direct_ops cache ops\n");
+	} else {
+		set_dma_ops(dev, &dma_noncoherent_ops);
+		dev_info(dev, "use dma_noncoherent_ops cache ops\n");
+	}
+}

arch/arm/boot/dts/sama5d3_emac.dtsi

@@ -41,7 +41,7 @@
 			};
 
 			macb1: ethernet@f802c000 {
-				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";

arch/arm/include/asm/kvm_host.h

@@ -223,7 +223,6 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
 			      struct kvm_vcpu_events *events);
 
 #define KVM_ARCH_WANT_MMU_NOTIFIER
-int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_unmap_hva_range(struct kvm *kvm,
 			unsigned long start, unsigned long end);
 void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);

arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts

@@ -46,6 +46,7 @@
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
 	status = "okay";
 };
 
@@ -56,6 +57,7 @@
 	vqmmc-supply = <&reg_bldo2>;
 	non-removable;
 	cap-mmc-hw-reset;
+	bus-width = <8>;
 	status = "okay";
 };
 

arch/arm64/include/asm/jump_label.h

@@ -28,7 +28,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm goto("1: nop\n\t"
+	asm_volatile_goto("1: nop\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".align 3\n\t"
 		 ".quad 1b, %l[l_yes], %c0\n\t"
@@ -42,7 +42,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm goto("1: b %l[l_yes]\n\t"
+	asm_volatile_goto("1: b %l[l_yes]\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".align 3\n\t"
 		 ".quad 1b, %l[l_yes], %c0\n\t"

arch/arm64/include/asm/kvm_host.h

@@ -61,8 +61,7 @@ struct kvm_arch {
 	u64    vmid_gen;
 	u32    vmid;
 
-	/* 1-level 2nd stage table and lock */
-	spinlock_t pgd_lock;
+	/* 1-level 2nd stage table, protected by kvm->mmu_lock */
 	pgd_t *pgd;
 
 	/* VTTBR value associated with above pgd and vmid */
@@ -357,7 +356,6 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
 			      struct kvm_vcpu_events *events);
 
 #define KVM_ARCH_WANT_MMU_NOTIFIER
-int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_unmap_hva_range(struct kvm *kvm,
 			unsigned long start, unsigned long end);
 void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);

arch/arm64/kernel/Makefile

@@ -54,6 +54,7 @@ arm64-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o	\
 arm64-obj-$(CONFIG_ARM64_RELOC_TEST)	+= arm64-reloc-test.o
 arm64-reloc-test-y := reloc_test_core.o reloc_test_syms.o
 arm64-obj-$(CONFIG_CRASH_DUMP)		+= crash_dump.o
+arm64-obj-$(CONFIG_CRASH_CORE)		+= crash_core.o
 arm64-obj-$(CONFIG_ARM_SDE_INTERFACE)	+= sdei.o
 arm64-obj-$(CONFIG_ARM64_SSBD)		+= ssbd.o
 

arch/arm64/kernel/crash_core.c

@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Linaro.
+ * Copyright (C) Huawei Futurewei Technologies.
+ */
+
+#include <linux/crash_core.h>
+#include <asm/memory.h>
+
+void arch_crash_save_vmcoreinfo(void)
+{
+	VMCOREINFO_NUMBER(VA_BITS);
+	/* Please note VMCOREINFO_NUMBER() uses "%d", not "%x" */
+	vmcoreinfo_append_str("NUMBER(kimage_voffset)=0x%llx\n",
+						kimage_voffset);
+	vmcoreinfo_append_str("NUMBER(PHYS_OFFSET)=0x%llx\n",
+						PHYS_OFFSET);
+	vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset());
+}

arch/arm64/kernel/machine_kexec.c

@@ -358,14 +358,3 @@ void crash_free_reserved_phys_range(unsigned long begin, unsigned long end)
 	}
 }
 #endif /* CONFIG_HIBERNATION */
-
-void arch_crash_save_vmcoreinfo(void)
-{
-	VMCOREINFO_NUMBER(VA_BITS);
-	/* Please note VMCOREINFO_NUMBER() uses "%d", not "%x" */
-	vmcoreinfo_append_str("NUMBER(kimage_voffset)=0x%llx\n",
-						kimage_voffset);
-	vmcoreinfo_append_str("NUMBER(PHYS_OFFSET)=0x%llx\n",
-						PHYS_OFFSET);
-	vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset());
-}

arch/arm64/kvm/hyp/switch.c

@@ -98,8 +98,10 @@ static void activate_traps_vhe(struct kvm_vcpu *vcpu)
 	val = read_sysreg(cpacr_el1);
 	val |= CPACR_EL1_TTA;
 	val &= ~CPACR_EL1_ZEN;
-	if (!update_fp_enabled(vcpu))
+	if (!update_fp_enabled(vcpu)) {
 		val &= ~CPACR_EL1_FPEN;
+		__activate_traps_fpsimd32(vcpu);
+	}
 
 	write_sysreg(val, cpacr_el1);
 
@@ -114,8 +116,10 @@ static void __hyp_text __activate_traps_nvhe(struct kvm_vcpu *vcpu)
 
 	val = CPTR_EL2_DEFAULT;
 	val |= CPTR_EL2_TTA | CPTR_EL2_TZ;
-	if (!update_fp_enabled(vcpu))
+	if (!update_fp_enabled(vcpu)) {
 		val |= CPTR_EL2_TFP;
+		__activate_traps_fpsimd32(vcpu);
+	}
 
 	write_sysreg(val, cptr_el2);
 }
@@ -129,7 +133,6 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
 	if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN) && (hcr & HCR_VSE))
 		write_sysreg_s(vcpu->arch.vsesr_el2, SYS_VSESR_EL2);
 
-	__activate_traps_fpsimd32(vcpu);
 	if (has_vhe())
 		activate_traps_vhe(vcpu);
 	else

arch/arm64/mm/mmu.c

@@ -985,8 +985,9 @@ int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr)
 
 	pmd = READ_ONCE(*pmdp);
 
-	/* No-op for empty entry and WARN_ON for valid entry */
-	if (!pmd_present(pmd) || !pmd_table(pmd)) {
+	if (!pmd_present(pmd))
+		return 1;
+	if (!pmd_table(pmd)) {
 		VM_WARN_ON(!pmd_table(pmd));
 		return 1;
 	}
@@ -1007,8 +1008,9 @@ int pud_free_pmd_page(pud_t *pudp, unsigned long addr)
 
 	pud = READ_ONCE(*pudp);
 
-	/* No-op for empty entry and WARN_ON for valid entry */
-	if (!pud_present(pud) || !pud_table(pud)) {
+	if (!pud_present(pud))
+		return 1;
+	if (!pud_table(pud)) {
 		VM_WARN_ON(!pud_table(pud));
 		return 1;
 	}

arch/hexagon/include/asm/bitops.h

@@ -211,7 +211,7 @@ static inline long ffz(int x)
  * This is defined the same way as ffs.
  * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
-static inline long fls(int x)
+static inline int fls(int x)
 {
 	int r;
 
@@ -232,7 +232,7 @@ static inline long fls(int x)
  * the libc and compiler builtin ffs routines, therefore
  * differs in spirit from the above ffz (man ffs).
  */
-static inline long ffs(int x)
+static inline int ffs(int x)
 {
 	int r;
 

arch/hexagon/kernel/dma.c

@@ -60,7 +60,7 @@ static void *hexagon_dma_alloc_coherent(struct device *dev, size_t size,
 			panic("Can't create %s() memory pool!", __func__);
 		else
 			gen_pool_add(coherent_pool,
-				pfn_to_virt(max_low_pfn),
+				(unsigned long)pfn_to_virt(max_low_pfn),
 				hexagon_coherent_pool_size, -1);
 	}
 

arch/m68k/mm/mcfmmu.c

@@ -172,7 +172,7 @@ void __init cf_bootmem_alloc(void)
 	high_memory = (void *)_ramend;
 
 	/* Reserve kernel text/data/bss */
-	memblock_reserve(memstart, memstart - _rambase);
+	memblock_reserve(_rambase, memstart - _rambase);
 
 	m68k_virt_to_node_shift = fls(_ramend - 1) - 6;
 	module_fixup(NULL, __start_fixup, __stop_fixup);

arch/mips/include/asm/kvm_host.h

@@ -931,7 +931,6 @@ enum kvm_mips_fault_result kvm_trap_emul_gva_fault(struct kvm_vcpu *vcpu,
 						   bool write);
 
 #define KVM_ARCH_WANT_MMU_NOTIFIER
-int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_unmap_hva_range(struct kvm *kvm,
 			unsigned long start, unsigned long end);
 void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);

arch/mips/include/asm/mach-lantiq/xway/xway_dma.h

@@ -40,6 +40,7 @@ struct ltq_dma_channel {
 	int desc;			/* the current descriptor */
 	struct ltq_dma_desc *desc_base; /* the descriptor base */
 	int phys;			/* physical addr */
+	struct device *dev;
 };
 
 enum {

arch/mips/kernel/vdso.c

@@ -13,6 +13,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -20,6 +21,7 @@
 
 #include <asm/abi.h>
 #include <asm/mips-cps.h>
+#include <asm/page.h>
 #include <asm/vdso.h>
 
 /* Kernel-provided data used by the VDSO. */
@@ -128,12 +130,30 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	vvar_size = gic_size + PAGE_SIZE;
 	size = vvar_size + image->size;
 
+	/*
+	 * Find a region that's large enough for us to perform the
+	 * colour-matching alignment below.
+	 */
+	if (cpu_has_dc_aliases)
+		size += shm_align_mask + 1;
+
 	base = get_unmapped_area(NULL, 0, size, 0, 0);
 	if (IS_ERR_VALUE(base)) {
 		ret = base;
 		goto out;
 	}
 
+	/*
+	 * If we suffer from dcache aliasing, ensure that the VDSO data page
+	 * mapping is coloured the same as the kernel's mapping of that memory.
+	 * This ensures that when the kernel updates the VDSO data userland
+	 * will observe it without requiring cache invalidations.
+	 */
+	if (cpu_has_dc_aliases) {
+		base = __ALIGN_MASK(base, shm_align_mask);
+		base += ((unsigned long)&vdso_data - gic_size) & shm_align_mask;
+	}
+
 	data_addr = base + gic_size;
 	vdso_addr = data_addr + PAGE_SIZE;
 

arch/mips/kvm/mmu.c

@@ -512,16 +512,6 @@ static int kvm_unmap_hva_handler(struct kvm *kvm, gfn_t gfn, gfn_t gfn_end,
 	return 1;
 }
 
-int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
-{
-	unsigned long end = hva + PAGE_SIZE;
-
-	handle_hva_to_gpa(kvm, hva, end, &kvm_unmap_hva_handler, NULL);
-
-	kvm_mips_callbacks->flush_shadow_all(kvm);
-	return 0;
-}
-
 int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end)
 {
 	handle_hva_to_gpa(kvm, start, end, &kvm_unmap_hva_handler, NULL);

arch/mips/lantiq/xway/dma.c

@@ -130,7 +130,7 @@ ltq_dma_alloc(struct ltq_dma_channel *ch)
 	unsigned long flags;
 
 	ch->desc = 0;
-	ch->desc_base = dma_zalloc_coherent(NULL,
+	ch->desc_base = dma_zalloc_coherent(ch->dev,
 				LTQ_DESC_NUM * LTQ_DESC_SIZE,
 				&ch->phys, GFP_ATOMIC);
 
@@ -182,7 +182,7 @@ ltq_dma_free(struct ltq_dma_channel *ch)
 	if (!ch->desc_base)
 		return;
 	ltq_dma_close(ch);
-	dma_free_coherent(NULL, LTQ_DESC_NUM * LTQ_DESC_SIZE,
+	dma_free_coherent(ch->dev, LTQ_DESC_NUM * LTQ_DESC_SIZE,
 		ch->desc_base, ch->phys);
 }
 EXPORT_SYMBOL_GPL(ltq_dma_free);

arch/powerpc/include/asm/book3s/64/pgtable.h

@@ -1051,7 +1051,6 @@ static inline void vmemmap_remove_mapping(unsigned long start,
 	return hash__vmemmap_remove_mapping(start, page_size);
 }
 #endif
-struct page *realmode_pfn_to_page(unsigned long pfn);
 
 static inline pte_t pmd_pte(pmd_t pmd)
 {

arch/powerpc/include/asm/iommu.h

@@ -220,8 +220,6 @@ extern void iommu_del_device(struct device *dev);
 extern int __init tce_iommu_bus_notifier_init(void);
 extern long iommu_tce_xchg(struct iommu_table *tbl, unsigned long entry,
 		unsigned long *hpa, enum dma_data_direction *direction);
-extern long iommu_tce_xchg_rm(struct iommu_table *tbl, unsigned long entry,
-		unsigned long *hpa, enum dma_data_direction *direction);
 #else
 static inline void iommu_register_group(struct iommu_table_group *table_group,
 					int pci_domain_number,

arch/powerpc/include/asm/mmu_context.h

@@ -38,6 +38,7 @@ extern long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem,
 		unsigned long ua, unsigned int pageshift, unsigned long *hpa);
 extern long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem,
 		unsigned long ua, unsigned int pageshift, unsigned long *hpa);
+extern void mm_iommu_ua_mark_dirty_rm(struct mm_struct *mm, unsigned long ua);
 extern long mm_iommu_mapped_inc(struct mm_iommu_table_group_mem_t *mem);
 extern void mm_iommu_mapped_dec(struct mm_iommu_table_group_mem_t *mem);
 #endif

arch/powerpc/include/asm/setup.h

@@ -9,6 +9,7 @@ extern void ppc_printk_progress(char *s, unsigned short hex);
 
 extern unsigned int rtas_data;
 extern unsigned long long memory_limit;
+extern bool init_mem_is_free;
 extern unsigned long klimit;
 extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
 

arch/powerpc/kernel/exceptions-64s.S

@@ -1314,9 +1314,7 @@ EXC_REAL_BEGIN(denorm_exception_hv, 0x1500, 0x100)
 
 #ifdef CONFIG_PPC_DENORMALISATION
 	mfspr	r10,SPRN_HSRR1
-	mfspr	r11,SPRN_HSRR0		/* save HSRR0 */
 	andis.	r10,r10,(HSRR1_DENORM)@h /* denorm? */
-	addi	r11,r11,-4		/* HSRR0 is next instruction */
 	bne+	denorm_assist
 #endif
 
@@ -1382,6 +1380,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
  */
 	XVCPSGNDP32(32)
 denorm_done:
+	mfspr	r11,SPRN_HSRR0
+	subi	r11,r11,4
 	mtspr	SPRN_HSRR0,r11
 	mtcrf	0x80,r9
 	ld	r9,PACA_EXGEN+EX_R9(r13)

arch/powerpc/kernel/iommu.c

@@ -1013,31 +1013,6 @@ long iommu_tce_xchg(struct iommu_table *tbl, unsigned long entry,
 }
 EXPORT_SYMBOL_GPL(iommu_tce_xchg);
 
-#ifdef CONFIG_PPC_BOOK3S_64
-long iommu_tce_xchg_rm(struct iommu_table *tbl, unsigned long entry,
-		unsigned long *hpa, enum dma_data_direction *direction)
-{
-	long ret;
-
-	ret = tbl->it_ops->exchange_rm(tbl, entry, hpa, direction);
-
-	if (!ret && ((*direction == DMA_FROM_DEVICE) ||
-			(*direction == DMA_BIDIRECTIONAL))) {
-		struct page *pg = realmode_pfn_to_page(*hpa >> PAGE_SHIFT);
-
-		if (likely(pg)) {
-			SetPageDirty(pg);
-		} else {
-			tbl->it_ops->exchange_rm(tbl, entry, hpa, direction);
-			ret = -EFAULT;
-		}
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(iommu_tce_xchg_rm);
-#endif
-
 int iommu_take_ownership(struct iommu_table *tbl)
 {
 	unsigned long flags, i, sz = (tbl->it_size + 7) >> 3;

arch/powerpc/kernel/tm.S

@@ -176,13 +176,27 @@ _GLOBAL(tm_reclaim)
 	std	r1, PACATMSCRATCH(r13)
 	ld	r1, PACAR1(r13)
 
-	/* Store the PPR in r11 and reset to decent value */
 	std	r11, GPR11(r1)			/* Temporary stash */
 
+	/*
+	 * Move the saved user r1 to the kernel stack in case PACATMSCRATCH is
+	 * clobbered by an exception once we turn on MSR_RI below.
+	 */
+	ld	r11, PACATMSCRATCH(r13)
+	std	r11, GPR1(r1)
+
+	/*
+	 * Store r13 away so we can free up the scratch SPR for the SLB fault
+	 * handler (needed once we start accessing the thread_struct).
+	 */
+	GET_SCRATCH0(r11)
+	std	r11, GPR13(r1)
+
 	/* Reset MSR RI so we can take SLB faults again */
 	li	r11, MSR_RI
 	mtmsrd	r11, 1
 
+	/* Store the PPR in r11 and reset to decent value */
 	mfspr	r11, SPRN_PPR
 	HMT_MEDIUM
 
@@ -207,11 +221,11 @@ _GLOBAL(tm_reclaim)
 	SAVE_GPR(8, r7)				/* user r8 */
 	SAVE_GPR(9, r7)				/* user r9 */
 	SAVE_GPR(10, r7)			/* user r10 */
-	ld	r3, PACATMSCRATCH(r13)		/* user r1 */
+	ld	r3, GPR1(r1)			/* user r1 */
 	ld	r4, GPR7(r1)			/* user r7 */
 	ld	r5, GPR11(r1)			/* user r11 */
 	ld	r6, GPR12(r1)			/* user r12 */
-	GET_SCRATCH0(8)				/* user r13 */
+	ld	r8, GPR13(r1)			/* user r13 */
 	std	r3, GPR1(r7)
 	std	r4, GPR7(r7)
 	std	r5, GPR11(r7)

arch/powerpc/kvm/book3s_64_mmu_hv.c

@@ -358,7 +358,7 @@ static int kvmppc_mmu_book3s_64_hv_xlate(struct kvm_vcpu *vcpu, gva_t eaddr,
 	unsigned long pp, key;
 	unsigned long v, orig_v, gr;
 	__be64 *hptep;
-	int index;
+	long int index;
 	int virtmode = vcpu->arch.shregs.msr & (data ? MSR_DR : MSR_IR);
 
 	if (kvm_is_radix(vcpu->kvm))

arch/powerpc/kvm/book3s_64_mmu_radix.c

@@ -525,8 +525,8 @@ int kvmppc_book3s_radix_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 				   unsigned long ea, unsigned long dsisr)
 {
 	struct kvm *kvm = vcpu->kvm;
-	unsigned long mmu_seq, pte_size;
-	unsigned long gpa, gfn, hva, pfn;
+	unsigned long mmu_seq;
+	unsigned long gpa, gfn, hva;
 	struct kvm_memory_slot *memslot;
 	struct page *page = NULL;
 	long ret;
@@ -623,9 +623,10 @@ int kvmppc_book3s_radix_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	 */
 	hva = gfn_to_hva_memslot(memslot, gfn);
 	if (upgrade_p && __get_user_pages_fast(hva, 1, 1, &page) == 1) {
-		pfn = page_to_pfn(page);
 		upgrade_write = true;
 	} else {
+		unsigned long pfn;
+
 		/* Call KVM generic code to do the slow-path check */
 		pfn = __gfn_to_pfn_memslot(memslot, gfn, false, NULL,
 					   writing, upgrade_p);
@@ -639,63 +640,45 @@ int kvmppc_book3s_radix_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		}
 	}
 
-	/* See if we can insert a 1GB or 2MB large PTE here */
-	level = 0;
-	if (page && PageCompound(page)) {
-		pte_size = PAGE_SIZE << compound_order(compound_head(page));
-		if (pte_size >= PUD_SIZE &&
-		    (gpa & (PUD_SIZE - PAGE_SIZE)) ==
-		    (hva & (PUD_SIZE - PAGE_SIZE))) {
-			level = 2;
-			pfn &= ~((PUD_SIZE >> PAGE_SHIFT) - 1);
-		} else if (pte_size >= PMD_SIZE &&
-			   (gpa & (PMD_SIZE - PAGE_SIZE)) ==
-			   (hva & (PMD_SIZE - PAGE_SIZE))) {
-			level = 1;
-			pfn &= ~((PMD_SIZE >> PAGE_SHIFT) - 1);
-		}
-	}
-
 	/*
-	 * Compute the PTE value that we need to insert.
+	 * Read the PTE from the process' radix tree and use that
+	 * so we get the shift and attribute bits.
 	 */
-	if (page) {
-		pgflags = _PAGE_READ | _PAGE_EXEC | _PAGE_PRESENT | _PAGE_PTE |
-			_PAGE_ACCESSED;
-		if (writing || upgrade_write)
-			pgflags |= _PAGE_WRITE | _PAGE_DIRTY;
-		pte = pfn_pte(pfn, __pgprot(pgflags));
+	local_irq_disable();
+	ptep = __find_linux_pte(vcpu->arch.pgdir, hva, NULL, &shift);
+	pte = *ptep;
+	local_irq_enable();
+
+	/* Get pte level from shift/size */
+	if (shift == PUD_SHIFT &&
+	    (gpa & (PUD_SIZE - PAGE_SIZE)) ==
+	    (hva & (PUD_SIZE - PAGE_SIZE))) {
+		level = 2;
+	} else if (shift == PMD_SHIFT &&
+		   (gpa & (PMD_SIZE - PAGE_SIZE)) ==
+		   (hva & (PMD_SIZE - PAGE_SIZE))) {
+		level = 1;
 	} else {
-		/*
-		 * Read the PTE from the process' radix tree and use that
-		 * so we get the attribute bits.
-		 */
-		local_irq_disable();
-		ptep = __find_linux_pte(vcpu->arch.pgdir, hva, NULL, &shift);
-		pte = *ptep;
-		local_irq_enable();
-		if (shift == PUD_SHIFT &&
-		    (gpa & (PUD_SIZE - PAGE_SIZE)) ==
-		    (hva & (PUD_SIZE - PAGE_SIZE))) {
-			level = 2;
-		} else if (shift == PMD_SHIFT &&
-			   (gpa & (PMD_SIZE - PAGE_SIZE)) ==
-			   (hva & (PMD_SIZE - PAGE_SIZE))) {
-			level = 1;
-		} else if (shift && shift != PAGE_SHIFT) {
-			/* Adjust PFN */
-			unsigned long mask = (1ul << shift) - PAGE_SIZE;
-			pte = __pte(pte_val(pte) | (hva & mask));
-		}
-		pte = __pte(pte_val(pte) | _PAGE_EXEC | _PAGE_ACCESSED);
-		if (writing || upgrade_write) {
-			if (pte_val(pte) & _PAGE_WRITE)
-				pte = __pte(pte_val(pte) | _PAGE_DIRTY);
-		} else {
-			pte = __pte(pte_val(pte) & ~(_PAGE_WRITE | _PAGE_DIRTY));
+		level = 0;
+		if (shift > PAGE_SHIFT) {
+			/*
+			 * If the pte maps more than one page, bring over
+			 * bits from the virtual address to get the real
+			 * address of the specific single page we want.
+			 */
+			unsigned long rpnmask = (1ul << shift) - PAGE_SIZE;
+			pte = __pte(pte_val(pte) | (hva & rpnmask));
 		}
 	}
 
+	pte = __pte(pte_val(pte) | _PAGE_EXEC | _PAGE_ACCESSED);
+	if (writing || upgrade_write) {
+		if (pte_val(pte) & _PAGE_WRITE)
+			pte = __pte(pte_val(pte) | _PAGE_DIRTY);
+	} else {
+		pte = __pte(pte_val(pte) & ~(_PAGE_WRITE | _PAGE_DIRTY));
+	}
+
 	/* Allocate space in the tree and write the PTE */
 	ret = kvmppc_create_pte(kvm, pte, gpa, level, mmu_seq);
 
@@ -725,10 +708,10 @@ int kvm_unmap_radix(struct kvm *kvm, struct kvm_memory_slot *memslot,
 					      gpa, shift);
 		kvmppc_radix_tlbie_page(kvm, gpa, shift);
 		if ((old & _PAGE_DIRTY) && memslot->dirty_bitmap) {
-			unsigned long npages = 1;
+			unsigned long psize = PAGE_SIZE;
 			if (shift)
-				npages = 1ul << (shift - PAGE_SHIFT);
-			kvmppc_update_dirty_map(memslot, gfn, npages);
+				psize = 1ul << shift;
+			kvmppc_update_dirty_map(memslot, gfn, psize);
 		}
 	}
 	return 0;				

arch/powerpc/kvm/book3s_64_vio_hv.c

@@ -187,12 +187,35 @@ long kvmppc_gpa_to_ua(struct kvm *kvm, unsigned long gpa,
 EXPORT_SYMBOL_GPL(kvmppc_gpa_to_ua);
 
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
-static void kvmppc_rm_clear_tce(struct iommu_table *tbl, unsigned long entry)
+static long iommu_tce_xchg_rm(struct mm_struct *mm, struct iommu_table *tbl,
+		unsigned long entry, unsigned long *hpa,
+		enum dma_data_direction *direction)
+{
+	long ret;
+
+	ret = tbl->it_ops->exchange_rm(tbl, entry, hpa, direction);
+
+	if (!ret && ((*direction == DMA_FROM_DEVICE) ||
+				(*direction == DMA_BIDIRECTIONAL))) {
+		__be64 *pua = IOMMU_TABLE_USERSPACE_ENTRY_RM(tbl, entry);
+		/*
+		 * kvmppc_rm_tce_iommu_do_map() updates the UA cache after
+		 * calling this so we still get here a valid UA.
+		 */
+		if (pua && *pua)
+			mm_iommu_ua_mark_dirty_rm(mm, be64_to_cpu(*pua));
+	}
+
+	return ret;
+}
+
+static void kvmppc_rm_clear_tce(struct kvm *kvm, struct iommu_table *tbl,
+		unsigned long entry)
 {
 	unsigned long hpa = 0;
 	enum dma_data_direction dir = DMA_NONE;
 
-	iommu_tce_xchg_rm(tbl, entry, &hpa, &dir);
+	iommu_tce_xchg_rm(kvm->mm, tbl, entry, &hpa, &dir);
 }
 
 static long kvmppc_rm_tce_iommu_mapped_dec(struct kvm *kvm,
@@ -224,7 +247,7 @@ static long kvmppc_rm_tce_iommu_do_unmap(struct kvm *kvm,
 	unsigned long hpa = 0;
 	long ret;
 
-	if (iommu_tce_xchg_rm(tbl, entry, &hpa, &dir))
+	if (iommu_tce_xchg_rm(kvm->mm, tbl, entry, &hpa, &dir))
 		/*
 		 * real mode xchg can fail if struct page crosses
 		 * a page boundary
@@ -236,7 +259,7 @@ static long kvmppc_rm_tce_iommu_do_unmap(struct kvm *kvm,
 
 	ret = kvmppc_rm_tce_iommu_mapped_dec(kvm, tbl, entry);
 	if (ret)
-		iommu_tce_xchg_rm(tbl, entry, &hpa, &dir);
+		iommu_tce_xchg_rm(kvm->mm, tbl, entry, &hpa, &dir);
 
 	return ret;
 }
@@ -282,7 +305,7 @@ static long kvmppc_rm_tce_iommu_do_map(struct kvm *kvm, struct iommu_table *tbl,
 	if (WARN_ON_ONCE_RM(mm_iommu_mapped_inc(mem)))
 		return H_CLOSED;
 
-	ret = iommu_tce_xchg_rm(tbl, entry, &hpa, &dir);
+	ret = iommu_tce_xchg_rm(kvm->mm, tbl, entry, &hpa, &dir);
 	if (ret) {
 		mm_iommu_mapped_dec(mem);
 		/*
@@ -371,7 +394,7 @@ long kvmppc_rm_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
 			return ret;
 
 		WARN_ON_ONCE_RM(1);
-		kvmppc_rm_clear_tce(stit->tbl, entry);
+		kvmppc_rm_clear_tce(vcpu->kvm, stit->tbl, entry);
 	}
 
 	kvmppc_tce_put(stt, entry, tce);
@@ -520,7 +543,7 @@ long kvmppc_rm_h_put_tce_indirect(struct kvm_vcpu *vcpu,
 				goto unlock_exit;
 
 			WARN_ON_ONCE_RM(1);
-			kvmppc_rm_clear_tce(stit->tbl, entry);
+			kvmppc_rm_clear_tce(vcpu->kvm, stit->tbl, entry);
 		}
 
 		kvmppc_tce_put(stt, entry + i, tce);
@@ -571,7 +594,7 @@ long kvmppc_rm_h_stuff_tce(struct kvm_vcpu *vcpu,
 				return ret;
 
 			WARN_ON_ONCE_RM(1);
-			kvmppc_rm_clear_tce(stit->tbl, entry);
+			kvmppc_rm_clear_tce(vcpu->kvm, stit->tbl, entry);
 		}
 	}
 

arch/powerpc/lib/checksum_64.S

@@ -443,6 +443,9 @@ _GLOBAL(csum_ipv6_magic)
 	addc	r0, r8, r9
 	ld	r10, 0(r4)
 	ld	r11, 8(r4)
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	rotldi	r5, r5, 8
+#endif
 	adde	r0, r0, r10
 	add	r5, r5, r7
 	adde	r0, r0, r11

arch/powerpc/lib/code-patching.c

@@ -28,6 +28,12 @@ static int __patch_instruction(unsigned int *exec_addr, unsigned int instr,
 {
 	int err;
 
+	/* Make sure we aren't patching a freed init section */
+	if (init_mem_is_free && init_section_contains(exec_addr, 4)) {
+		pr_debug("Skipping init section patching addr: 0x%px\n", exec_addr);
+		return 0;
+	}
+
 	__put_user_size(instr, patch_addr, 4, err);
 	if (err)
 		return err;

arch/powerpc/mm/init_64.c

@@ -308,55 +308,6 @@ void register_page_bootmem_memmap(unsigned long section_nr,
 {
 }
 
-/*
- * We do not have access to the sparsemem vmemmap, so we fallback to
- * walking the list of sparsemem blocks which we already maintain for
- * the sake of crashdump. In the long run, we might want to maintain
- * a tree if performance of that linear walk becomes a problem.
- *
- * realmode_pfn_to_page functions can fail due to:
- * 1) As real sparsemem blocks do not lay in RAM continously (they
- * are in virtual address space which is not available in the real mode),
- * the requested page struct can be split between blocks so get_page/put_page
- * may fail.
- * 2) When huge pages are used, the get_page/put_page API will fail
- * in real mode as the linked addresses in the page struct are virtual
- * too.
- */
-struct page *realmode_pfn_to_page(unsigned long pfn)
-{
-	struct vmemmap_backing *vmem_back;
-	struct page *page;
-	unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
-	unsigned long pg_va = (unsigned long) pfn_to_page(pfn);
-
-	for (vmem_back = vmemmap_list; vmem_back; vmem_back = vmem_back->list) {
-		if (pg_va < vmem_back->virt_addr)
-			continue;
-
-		/* After vmemmap_list entry free is possible, need check all */
-		if ((pg_va + sizeof(struct page)) <=
-				(vmem_back->virt_addr + page_size)) {
-			page = (struct page *) (vmem_back->phys + pg_va -
-				vmem_back->virt_addr);
-			return page;
-		}
-	}
-
-	/* Probably that page struct is split between real pages */
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(realmode_pfn_to_page);
-
-#else
-
-struct page *realmode_pfn_to_page(unsigned long pfn)
-{
-	struct page *page = pfn_to_page(pfn);
-	return page;
-}
-EXPORT_SYMBOL_GPL(realmode_pfn_to_page);
-
 #endif /* CONFIG_SPARSEMEM_VMEMMAP */
 
 #ifdef CONFIG_PPC_BOOK3S_64

arch/powerpc/mm/mem.c

@@ -63,6 +63,7 @@
 #endif
 
 unsigned long long memory_limit;
+bool init_mem_is_free;
 
 #ifdef CONFIG_HIGHMEM
 pte_t *kmap_pte;
@@ -396,6 +397,7 @@ void free_initmem(void)
 {
 	ppc_md.progress = ppc_printk_progress;
 	mark_initmem_nx();
+	init_mem_is_free = true;
 	free_initmem_default(POISON_FREE_INITMEM);
 }
 

arch/powerpc/mm/mmu_context_iommu.c

@@ -18,11 +18,15 @@
 #include <linux/migrate.h>
 #include <linux/hugetlb.h>
 #include <linux/swap.h>
+#include <linux/sizes.h>
 #include <asm/mmu_context.h>
 #include <asm/pte-walk.h>
 
 static DEFINE_MUTEX(mem_list_mutex);
 
+#define MM_IOMMU_TABLE_GROUP_PAGE_DIRTY	0x1
+#define MM_IOMMU_TABLE_GROUP_PAGE_MASK	~(SZ_4K - 1)
+
 struct mm_iommu_table_group_mem_t {
 	struct list_head next;
 	struct rcu_head rcu;
@@ -263,6 +267,9 @@ static void mm_iommu_unpin(struct mm_iommu_table_group_mem_t *mem)
 		if (!page)
 			continue;
 
+		if (mem->hpas[i] & MM_IOMMU_TABLE_GROUP_PAGE_DIRTY)
+			SetPageDirty(page);
+
 		put_page(page);
 		mem->hpas[i] = 0;
 	}
@@ -360,7 +367,6 @@ struct mm_iommu_table_group_mem_t *mm_iommu_lookup_rm(struct mm_struct *mm,
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(mm_iommu_lookup_rm);
 
 struct mm_iommu_table_group_mem_t *mm_iommu_find(struct mm_struct *mm,
 		unsigned long ua, unsigned long entries)
@@ -390,7 +396,7 @@ long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem,
 	if (pageshift > mem->pageshift)
 		return -EFAULT;
 
-	*hpa = *va | (ua & ~PAGE_MASK);
+	*hpa = (*va & MM_IOMMU_TABLE_GROUP_PAGE_MASK) | (ua & ~PAGE_MASK);
 
 	return 0;
 }
@@ -413,11 +419,31 @@ long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem,
 	if (!pa)
 		return -EFAULT;
 
-	*hpa = *pa | (ua & ~PAGE_MASK);
+	*hpa = (*pa & MM_IOMMU_TABLE_GROUP_PAGE_MASK) | (ua & ~PAGE_MASK);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(mm_iommu_ua_to_hpa_rm);
+
+extern void mm_iommu_ua_mark_dirty_rm(struct mm_struct *mm, unsigned long ua)
+{
+	struct mm_iommu_table_group_mem_t *mem;
+	long entry;
+	void *va;
+	unsigned long *pa;
+
+	mem = mm_iommu_lookup_rm(mm, ua, PAGE_SIZE);
+	if (!mem)
+		return;
+
+	entry = (ua - mem->ua) >> PAGE_SHIFT;
+	va = &mem->hpas[entry];
+
+	pa = (void *) vmalloc_to_phys(va);
+	if (!pa)
+		return;
+
+	*pa |= MM_IOMMU_TABLE_GROUP_PAGE_DIRTY;
+}
 
 long mm_iommu_mapped_inc(struct mm_iommu_table_group_mem_t *mem)
 {

arch/powerpc/mm/numa.c

@@ -1204,7 +1204,9 @@ int find_and_online_cpu_nid(int cpu)
 	int new_nid;
 
 	/* Use associativity from first thread for all siblings */
-	vphn_get_associativity(cpu, associativity);
+	if (vphn_get_associativity(cpu, associativity))
+		return cpu_to_node(cpu);
+
 	new_nid = associativity_to_nid(associativity);
 	if (new_nid < 0 || !node_possible(new_nid))
 		new_nid = first_online_node;
@@ -1452,7 +1454,8 @@ static struct timer_list topology_timer;
 
 static void reset_topology_timer(void)
 {
-	mod_timer(&topology_timer, jiffies + topology_timer_secs * HZ);
+	if (vphn_enabled)
+		mod_timer(&topology_timer, jiffies + topology_timer_secs * HZ);
 }
 
 #ifdef CONFIG_SMP

arch/powerpc/mm/pkeys.c

@@ -45,7 +45,7 @@ static void scan_pkey_feature(void)
 	 * Since any pkey can be used for data or execute, we will just treat
 	 * all keys as equal and track them as one entity.
 	 */
-	pkeys_total = be32_to_cpu(vals[0]);
+	pkeys_total = vals[0];
 	pkeys_devtree_defined = true;
 }
 

arch/powerpc/platforms/powernv/pci-ioda-tce.c

@@ -276,7 +276,7 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
 	level_shift = entries_shift + 3;
 	level_shift = max_t(unsigned int, level_shift, PAGE_SHIFT);
 
-	if ((level_shift - 3) * levels + page_shift >= 60)
+	if ((level_shift - 3) * levels + page_shift >= 55)
 		return -EINVAL;
 
 	/* Allocate TCE table */

arch/riscv/include/asm/asm-prototypes.h

@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RISCV_PROTOTYPES_H
+
+#include <linux/ftrace.h>
+#include <asm-generic/asm-prototypes.h>
+
+#endif /* _ASM_RISCV_PROTOTYPES_H */

arch/riscv/kernel/setup.c

@@ -85,15 +85,8 @@ atomic_t hart_lottery;
 #ifdef CONFIG_BLK_DEV_INITRD
 static void __init setup_initrd(void)
 {
-	extern char __initramfs_start[];
-	extern unsigned long __initramfs_size;
 	unsigned long size;
 
-	if (__initramfs_size > 0) {
-		initrd_start = (unsigned long)(&__initramfs_start);
-		initrd_end = initrd_start + __initramfs_size;
-	}
-
 	if (initrd_start >= initrd_end) {
 		printk(KERN_INFO "initrd not found or empty");
 		goto disable;

arch/s390/crypto/paes_s390.c

@@ -208,7 +208,7 @@ static int cbc_paes_crypt(struct blkcipher_desc *desc, unsigned long modifier,
 			      walk->dst.virt.addr, walk->src.virt.addr, n);
 		if (k)
 			ret = blkcipher_walk_done(desc, walk, nbytes - k);
-		if (n < k) {
+		if (k < n) {
 			if (__cbc_paes_set_key(ctx) != 0)
 				return blkcipher_walk_done(desc, walk, -EIO);
 			memcpy(param.key, ctx->pk.protkey, MAXPROTKEYSIZE);

arch/s390/include/asm/mmu.h

@@ -16,7 +16,13 @@ typedef struct {
 	unsigned long asce;
 	unsigned long asce_limit;
 	unsigned long vdso_base;
-	/* The mmu context allocates 4K page tables. */
+	/*
+	 * The following bitfields need a down_write on the mm
+	 * semaphore when they are written to. As they are only
+	 * written once, they can be read without a lock.
+	 *
+	 * The mmu context allocates 4K page tables.
+	 */
 	unsigned int alloc_pgste:1;
 	/* The mmu context uses extended page tables. */
 	unsigned int has_pgste:1;

arch/s390/kvm/kvm-s390.c

@@ -481,7 +481,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		break;
 	case KVM_CAP_S390_HPAGE_1M:
 		r = 0;
-		if (hpage)
+		if (hpage && !kvm_is_ucontrol(kvm))
 			r = 1;
 		break;
 	case KVM_CAP_S390_MEM_OP:
@@ -691,11 +691,13 @@ static int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap)
 		mutex_lock(&kvm->lock);
 		if (kvm->created_vcpus)
 			r = -EBUSY;
-		else if (!hpage || kvm->arch.use_cmma)
+		else if (!hpage || kvm->arch.use_cmma || kvm_is_ucontrol(kvm))
 			r = -EINVAL;
 		else {
 			r = 0;
+			down_write(&kvm->mm->mmap_sem);
 			kvm->mm->context.allow_gmap_hpage_1m = 1;
+			up_write(&kvm->mm->mmap_sem);
 			/*
 			 * We might have to create fake 4k page
 			 * tables. To avoid that the hardware works on

arch/s390/kvm/priv.c

@@ -280,9 +280,11 @@ retry:
 			goto retry;
 		}
 	}
-	if (rc)
-		return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
 	up_read(&current->mm->mmap_sem);
+	if (rc == -EFAULT)
+		return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
+	if (rc < 0)
+		return rc;
 	vcpu->run->s.regs.gprs[reg1] &= ~0xff;
 	vcpu->run->s.regs.gprs[reg1] |= key;
 	return 0;
@@ -324,9 +326,11 @@ retry:
 			goto retry;
 		}
 	}
-	if (rc < 0)
-		return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
 	up_read(&current->mm->mmap_sem);
+	if (rc == -EFAULT)
+		return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
+	if (rc < 0)
+		return rc;
 	kvm_s390_set_psw_cc(vcpu, rc);
 	return 0;
 }
@@ -390,12 +394,12 @@ static int handle_sske(struct kvm_vcpu *vcpu)
 					      FAULT_FLAG_WRITE, &unlocked);
 			rc = !rc ? -EAGAIN : rc;
 		}
+		up_read(&current->mm->mmap_sem);
 		if (rc == -EFAULT)
 			return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-
-		up_read(&current->mm->mmap_sem);
-		if (rc >= 0)
-			start += PAGE_SIZE;
+		if (rc < 0)
+			return rc;
+		start += PAGE_SIZE;
 	}
 
 	if (m3 & (SSKE_MC | SSKE_MR)) {
@@ -1002,13 +1006,15 @@ static int handle_pfmf(struct kvm_vcpu *vcpu)
 						      FAULT_FLAG_WRITE, &unlocked);
 				rc = !rc ? -EAGAIN : rc;
 			}
+			up_read(&current->mm->mmap_sem);
 			if (rc == -EFAULT)
 				return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-
-			up_read(&current->mm->mmap_sem);
-			if (rc >= 0)
-				start += PAGE_SIZE;
+			if (rc == -EAGAIN)
+				continue;
+			if (rc < 0)
+				return rc;
 		}
+		start += PAGE_SIZE;
 	}
 	if (vcpu->run->s.regs.gprs[reg1] & PFMF_FSC) {
 		if (psw_bits(vcpu->arch.sie_block->gpsw).eaba == PSW_BITS_AMODE_64BIT) {

arch/s390/kvm/vsie.c

@@ -173,7 +173,8 @@ static int shadow_crycb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 		return set_validity_icpt(scb_s, 0x0039U);
 
 	/* copy only the wrapping keys */
-	if (read_guest_real(vcpu, crycb_addr + 72, &vsie_page->crycb, 56))
+	if (read_guest_real(vcpu, crycb_addr + 72,
+			    vsie_page->crycb.dea_wrapping_key_mask, 56))
 		return set_validity_icpt(scb_s, 0x0035U);
 
 	scb_s->ecb3 |= ecb3_flags;

arch/s390/mm/gmap.c

@@ -708,11 +708,13 @@ void gmap_discard(struct gmap *gmap, unsigned long from, unsigned long to)
 		vmaddr |= gaddr & ~PMD_MASK;
 		/* Find vma in the parent mm */
 		vma = find_vma(gmap->mm, vmaddr);
+		if (!vma)
+			continue;
 		/*
 		 * We do not discard pages that are backed by
 		 * hugetlbfs, so we don't have to refault them.
 		 */
-		if (vma && is_vm_hugetlb_page(vma))
+		if (is_vm_hugetlb_page(vma))
 			continue;
 		size = min(to - gaddr, PMD_SIZE - (gaddr & ~PMD_MASK));
 		zap_page_range(vma, vmaddr, size);

arch/x86/boot/compressed/mem_encrypt.S

@@ -25,20 +25,6 @@ ENTRY(get_sev_encryption_bit)
 	push	%ebx
 	push	%ecx
 	push	%edx
-	push	%edi
-
-	/*
-	 * RIP-relative addressing is needed to access the encryption bit
-	 * variable. Since we are running in 32-bit mode we need this call/pop
-	 * sequence to get the proper relative addressing.
-	 */
-	call	1f
-1:	popl	%edi
-	subl	$1b, %edi
-
-	movl	enc_bit(%edi), %eax
-	cmpl	$0, %eax
-	jge	.Lsev_exit
 
 	/* Check if running under a hypervisor */
 	movl	$1, %eax
@@ -69,15 +55,12 @@ ENTRY(get_sev_encryption_bit)
 
 	movl	%ebx, %eax
 	andl	$0x3f, %eax		/* Return the encryption bit location */
-	movl	%eax, enc_bit(%edi)
 	jmp	.Lsev_exit
 
 .Lno_sev:
 	xor	%eax, %eax
-	movl	%eax, enc_bit(%edi)
 
 .Lsev_exit:
-	pop	%edi
 	pop	%edx
 	pop	%ecx
 	pop	%ebx
@@ -113,8 +96,6 @@ ENTRY(set_sev_encryption_mask)
 ENDPROC(set_sev_encryption_mask)
 
 	.data
-enc_bit:
-	.int	0xffffffff
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 	.balign	8

arch/x86/crypto/aegis128-aesni-glue.c

@@ -379,7 +379,6 @@ static int __init crypto_aegis128_aesni_module_init(void)
 {
 	if (!boot_cpu_has(X86_FEATURE_XMM2) ||
 	    !boot_cpu_has(X86_FEATURE_AES) ||
-	    !boot_cpu_has(X86_FEATURE_OSXSAVE) ||
 	    !cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL))
 		return -ENODEV;
 

arch/x86/crypto/aegis128l-aesni-glue.c

@@ -379,7 +379,6 @@ static int __init crypto_aegis128l_aesni_module_init(void)
 {
 	if (!boot_cpu_has(X86_FEATURE_XMM2) ||
 	    !boot_cpu_has(X86_FEATURE_AES) ||
-	    !boot_cpu_has(X86_FEATURE_OSXSAVE) ||
 	    !cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL))
 		return -ENODEV;
 

arch/x86/crypto/aegis256-aesni-glue.c

@@ -379,7 +379,6 @@ static int __init crypto_aegis256_aesni_module_init(void)
 {
 	if (!boot_cpu_has(X86_FEATURE_XMM2) ||
 	    !boot_cpu_has(X86_FEATURE_AES) ||
-	    !boot_cpu_has(X86_FEATURE_OSXSAVE) ||
 	    !cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL))
 		return -ENODEV;
 

arch/x86/crypto/morus1280-sse2-glue.c

@@ -40,7 +40,6 @@ MORUS1280_DECLARE_ALGS(sse2, "morus1280-sse2", 350);
 static int __init crypto_morus1280_sse2_module_init(void)
 {
 	if (!boot_cpu_has(X86_FEATURE_XMM2) ||
-	    !boot_cpu_has(X86_FEATURE_OSXSAVE) ||
 	    !cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL))
 		return -ENODEV;
 

arch/x86/crypto/morus640-sse2-glue.c

@@ -40,7 +40,6 @@ MORUS640_DECLARE_ALGS(sse2, "morus640-sse2", 400);
 static int __init crypto_morus640_sse2_module_init(void)
 {
 	if (!boot_cpu_has(X86_FEATURE_XMM2) ||
-	    !boot_cpu_has(X86_FEATURE_OSXSAVE) ||
 	    !cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL))
 		return -ENODEV;
 

arch/x86/events/intel/lbr.c

@@ -1272,4 +1272,8 @@ void intel_pmu_lbr_init_knl(void)
 
 	x86_pmu.lbr_sel_mask = LBR_SEL_MASK;
 	x86_pmu.lbr_sel_map  = snb_lbr_sel_map;
+
+	/* Knights Landing does have MISPREDICT bit */
+	if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_LIP)
+		x86_pmu.intel_cap.lbr_format = LBR_FORMAT_EIP_FLAGS;
 }

arch/x86/hyperv/hv_apic.c

@@ -95,8 +95,8 @@ static void hv_apic_eoi_write(u32 reg, u32 val)
  */
 static bool __send_ipi_mask_ex(const struct cpumask *mask, int vector)
 {
-	struct ipi_arg_ex **arg;
-	struct ipi_arg_ex *ipi_arg;
+	struct hv_send_ipi_ex **arg;
+	struct hv_send_ipi_ex *ipi_arg;
 	unsigned long flags;
 	int nr_bank = 0;
 	int ret = 1;
@@ -105,7 +105,7 @@ static bool __send_ipi_mask_ex(const struct cpumask *mask, int vector)
 		return false;
 
 	local_irq_save(flags);
-	arg = (struct ipi_arg_ex **)this_cpu_ptr(hyperv_pcpu_input_arg);
+	arg = (struct hv_send_ipi_ex **)this_cpu_ptr(hyperv_pcpu_input_arg);
 
 	ipi_arg = *arg;
 	if (unlikely(!ipi_arg))
@@ -135,7 +135,7 @@ ipi_mask_ex_done:
 static bool __send_ipi_mask(const struct cpumask *mask, int vector)
 {
 	int cur_cpu, vcpu;
-	struct ipi_arg_non_ex ipi_arg;
+	struct hv_send_ipi ipi_arg;
 	int ret = 1;
 
 	trace_hyperv_send_ipi_mask(mask, vector);

arch/x86/include/asm/atomic.h

@@ -80,11 +80,11 @@ static __always_inline void arch_atomic_sub(int i, atomic_t *v)
  * true if the result is zero, or false for all
  * other cases.
  */
-#define arch_atomic_sub_and_test arch_atomic_sub_and_test
 static __always_inline bool arch_atomic_sub_and_test(int i, atomic_t *v)
 {
 	GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, "er", i, "%0", e);
 }
+#define arch_atomic_sub_and_test arch_atomic_sub_and_test
 
 /**
  * arch_atomic_inc - increment atomic variable
@@ -92,12 +92,12 @@ static __always_inline bool arch_atomic_sub_and_test(int i, atomic_t *v)
  *
  * Atomically increments @v by 1.
  */
-#define arch_atomic_inc arch_atomic_inc
 static __always_inline void arch_atomic_inc(atomic_t *v)
 {
 	asm volatile(LOCK_PREFIX "incl %0"
 		     : "+m" (v->counter));
 }
+#define arch_atomic_inc arch_atomic_inc
 
 /**
  * arch_atomic_dec - decrement atomic variable
@@ -105,12 +105,12 @@ static __always_inline void arch_atomic_inc(atomic_t *v)
  *
  * Atomically decrements @v by 1.
  */
-#define arch_atomic_dec arch_atomic_dec
 static __always_inline void arch_atomic_dec(atomic_t *v)
 {
 	asm volatile(LOCK_PREFIX "decl %0"
 		     : "+m" (v->counter));
 }
+#define arch_atomic_dec arch_atomic_dec
 
 /**
  * arch_atomic_dec_and_test - decrement and test
@@ -120,11 +120,11 @@ static __always_inline void arch_atomic_dec(atomic_t *v)
  * returns true if the result is 0, or false for all other
  * cases.
  */
-#define arch_atomic_dec_and_test arch_atomic_dec_and_test
 static __always_inline bool arch_atomic_dec_and_test(atomic_t *v)
 {
 	GEN_UNARY_RMWcc(LOCK_PREFIX "decl", v->counter, "%0", e);
 }
+#define arch_atomic_dec_and_test arch_atomic_dec_and_test
 
 /**
  * arch_atomic_inc_and_test - increment and test
@@ -134,11 +134,11 @@ static __always_inline bool arch_atomic_dec_and_test(atomic_t *v)
  * and returns true if the result is zero, or false for all
  * other cases.
  */
-#define arch_atomic_inc_and_test arch_atomic_inc_and_test
 static __always_inline bool arch_atomic_inc_and_test(atomic_t *v)
 {
 	GEN_UNARY_RMWcc(LOCK_PREFIX "incl", v->counter, "%0", e);
 }
+#define arch_atomic_inc_and_test arch_atomic_inc_and_test
 
 /**
  * arch_atomic_add_negative - add and test if negative
@@ -149,11 +149,11 @@ static __always_inline bool arch_atomic_inc_and_test(atomic_t *v)
  * if the result is negative, or false when
  * result is greater than or equal to zero.
  */
-#define arch_atomic_add_negative arch_atomic_add_negative
 static __always_inline bool arch_atomic_add_negative(int i, atomic_t *v)
 {
 	GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, "er", i, "%0", s);
 }
+#define arch_atomic_add_negative arch_atomic_add_negative
 
 /**
  * arch_atomic_add_return - add integer and return

arch/x86/include/asm/atomic64_32.h

@@ -205,12 +205,12 @@ static inline long long arch_atomic64_sub(long long i, atomic64_t *v)
  *
  * Atomically increments @v by 1.
  */
-#define arch_atomic64_inc arch_atomic64_inc
 static inline void arch_atomic64_inc(atomic64_t *v)
 {
 	__alternative_atomic64(inc, inc_return, /* no output */,
 			       "S" (v) : "memory", "eax", "ecx", "edx");
 }
+#define arch_atomic64_inc arch_atomic64_inc
 
 /**
  * arch_atomic64_dec - decrement atomic64 variable
@@ -218,12 +218,12 @@ static inline void arch_atomic64_inc(atomic64_t *v)
  *
  * Atomically decrements @v by 1.
  */
-#define arch_atomic64_dec arch_atomic64_dec
 static inline void arch_atomic64_dec(atomic64_t *v)
 {
 	__alternative_atomic64(dec, dec_return, /* no output */,
 			       "S" (v) : "memory", "eax", "ecx", "edx");
 }
+#define arch_atomic64_dec arch_atomic64_dec
 
 /**
  * arch_atomic64_add_unless - add unless the number is a given value
@@ -245,7 +245,6 @@ static inline int arch_atomic64_add_unless(atomic64_t *v, long long a,
 	return (int)a;
 }
 
-#define arch_atomic64_inc_not_zero arch_atomic64_inc_not_zero
 static inline int arch_atomic64_inc_not_zero(atomic64_t *v)
 {
 	int r;
@@ -253,8 +252,8 @@ static inline int arch_atomic64_inc_not_zero(atomic64_t *v)
 			     "S" (v) : "ecx", "edx", "memory");
 	return r;
 }
+#define arch_atomic64_inc_not_zero arch_atomic64_inc_not_zero
 
-#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
 static inline long long arch_atomic64_dec_if_positive(atomic64_t *v)
 {
 	long long r;
@@ -262,6 +261,7 @@ static inline long long arch_atomic64_dec_if_positive(atomic64_t *v)
 			     "S" (v) : "ecx", "memory");
 	return r;
 }
+#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
 
 #undef alternative_atomic64
 #undef __alternative_atomic64

arch/x86/include/asm/atomic64_64.h

@@ -71,11 +71,11 @@ static inline void arch_atomic64_sub(long i, atomic64_t *v)
  * true if the result is zero, or false for all
  * other cases.
  */
-#define arch_atomic64_sub_and_test arch_atomic64_sub_and_test
 static inline bool arch_atomic64_sub_and_test(long i, atomic64_t *v)
 {
 	GEN_BINARY_RMWcc(LOCK_PREFIX "subq", v->counter, "er", i, "%0", e);
 }
+#define arch_atomic64_sub_and_test arch_atomic64_sub_and_test
 
 /**
  * arch_atomic64_inc - increment atomic64 variable
@@ -83,13 +83,13 @@ static inline bool arch_atomic64_sub_and_test(long i, atomic64_t *v)
  *
  * Atomically increments @v by 1.
  */
-#define arch_atomic64_inc arch_atomic64_inc
 static __always_inline void arch_atomic64_inc(atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "incq %0"
 		     : "=m" (v->counter)
 		     : "m" (v->counter));
 }
+#define arch_atomic64_inc arch_atomic64_inc
 
 /**
  * arch_atomic64_dec - decrement atomic64 variable
@@ -97,13 +97,13 @@ static __always_inline void arch_atomic64_inc(atomic64_t *v)
  *
  * Atomically decrements @v by 1.
  */
-#define arch_atomic64_dec arch_atomic64_dec
 static __always_inline void arch_atomic64_dec(atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "decq %0"
 		     : "=m" (v->counter)
 		     : "m" (v->counter));
 }
+#define arch_atomic64_dec arch_atomic64_dec
 
 /**
  * arch_atomic64_dec_and_test - decrement and test
@@ -113,11 +113,11 @@ static __always_inline void arch_atomic64_dec(atomic64_t *v)
  * returns true if the result is 0, or false for all other
  * cases.
  */
-#define arch_atomic64_dec_and_test arch_atomic64_dec_and_test
 static inline bool arch_atomic64_dec_and_test(atomic64_t *v)
 {
 	GEN_UNARY_RMWcc(LOCK_PREFIX "decq", v->counter, "%0", e);
 }
+#define arch_atomic64_dec_and_test arch_atomic64_dec_and_test
 
 /**
  * arch_atomic64_inc_and_test - increment and test
@@ -127,11 +127,11 @@ static inline bool arch_atomic64_dec_and_test(atomic64_t *v)
  * and returns true if the result is zero, or false for all
  * other cases.
  */
-#define arch_atomic64_inc_and_test arch_atomic64_inc_and_test
 static inline bool arch_atomic64_inc_and_test(atomic64_t *v)
 {
 	GEN_UNARY_RMWcc(LOCK_PREFIX "incq", v->counter, "%0", e);
 }
+#define arch_atomic64_inc_and_test arch_atomic64_inc_and_test
 
 /**
  * arch_atomic64_add_negative - add and test if negative
@@ -142,11 +142,11 @@ static inline bool arch_atomic64_inc_and_test(atomic64_t *v)
  * if the result is negative, or false when
  * result is greater than or equal to zero.
  */
-#define arch_atomic64_add_negative arch_atomic64_add_negative
 static inline bool arch_atomic64_add_negative(long i, atomic64_t *v)
 {
 	GEN_BINARY_RMWcc(LOCK_PREFIX "addq", v->counter, "er", i, "%0", s);
 }
+#define arch_atomic64_add_negative arch_atomic64_add_negative
 
 /**
  * arch_atomic64_add_return - add and return

arch/x86/include/asm/fixmap.h

@@ -14,6 +14,16 @@
 #ifndef _ASM_X86_FIXMAP_H
 #define _ASM_X86_FIXMAP_H
 
+/*
+ * Exposed to assembly code for setting up initial page tables. Cannot be
+ * calculated in assembly code (fixmap entries are an enum), but is sanity
+ * checked in the actual fixmap C code to make sure that the fixmap is
+ * covered fully.
+ */
+#define FIXMAP_PMD_NUM	2
+/* fixmap starts downwards from the 507th entry in level2_fixmap_pgt */
+#define FIXMAP_PMD_TOP	507
+
 #ifndef __ASSEMBLY__
 #include <linux/kernel.h>
 #include <asm/acpi.h>

arch/x86/include/asm/hyperv-tlfs.h

@@ -726,19 +726,21 @@ struct hv_enlightened_vmcs {
 #define HV_STIMER_AUTOENABLE		(1ULL << 3)
 #define HV_STIMER_SINT(config)		(__u8)(((config) >> 16) & 0x0F)
 
-struct ipi_arg_non_ex {
-	u32 vector;
-	u32 reserved;
-	u64 cpu_mask;
-};
-
 struct hv_vpset {
 	u64 format;
 	u64 valid_bank_mask;
 	u64 bank_contents[];
 };
 
-struct ipi_arg_ex {
+/* HvCallSendSyntheticClusterIpi hypercall */
+struct hv_send_ipi {
+	u32 vector;
+	u32 reserved;
+	u64 cpu_mask;
+};
+
+/* HvCallSendSyntheticClusterIpiEx hypercall */
+struct hv_send_ipi_ex {
 	u32 vector;
 	u32 reserved;
 	struct hv_vpset vp_set;