treewide: Fix typos in printk

This patch fixes spelling typos found in printk.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drivers/fmc/fmc-core.c

@@ -244,7 +244,7 @@ int fmc_device_register_n_gw(struct fmc_device **devs, int n,
 		if (!fmc->carrier_name || !fmc->carrier_data ||
 		    !fmc->device_id) {
 			dev_err(fmc->hwdev,
-				"deivce nr %i: carrier name, "
+				"device nr %i: carrier name, "
 				"data or dev_id not set\n", i);
 			ret = -EINVAL;
 		}

drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c

@@ -276,7 +276,7 @@ amdgpu_ucode_get_load_type(struct amdgpu_device *adev, int load_type)
 		else
 			return AMDGPU_FW_LOAD_PSP;
 	default:
-		DRM_ERROR("Unknow firmware load type\n");
+		DRM_ERROR("Unknown firmware load type\n");
 	}
 
 	return AMDGPU_FW_LOAD_DIRECT;

drivers/gpu/drm/i915/intel_cdclk.c

@@ -1626,7 +1626,7 @@ static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
 
 	/* Timeout 200us */
 	if (wait_for((I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) == 0, 1))
-		DRM_ERROR("timout waiting for CDCLK PLL unlock\n");
+		DRM_ERROR("timeout waiting for CDCLK PLL unlock\n");
 
 	dev_priv->cdclk.hw.vco = 0;
 }
@@ -1644,7 +1644,7 @@ static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
 
 	/* Timeout 200us */
 	if (wait_for((I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) != 0, 1))
-		DRM_ERROR("timout waiting for CDCLK PLL lock\n");
+		DRM_ERROR("timeout waiting for CDCLK PLL lock\n");
 
 	dev_priv->cdclk.hw.vco = vco;
 }

drivers/net/ethernet/qlogic/qed/qed_int.c

@@ -321,7 +321,7 @@ static int qed_pglub_rbc_attn_cb(struct qed_hwfn *p_hwfn)
 	tmp = qed_rd(p_hwfn, p_hwfn->p_dpc_ptt,
 		     PGLUE_B_REG_TX_ERR_WR_DETAILS_ICPL);
 	if (tmp & PGLUE_ATTENTION_ICPL_VALID)
-		DP_INFO(p_hwfn, "ICPL eror - %08x\n", tmp);
+		DP_INFO(p_hwfn, "ICPL error - %08x\n", tmp);
 
 	tmp = qed_rd(p_hwfn, p_hwfn->p_dpc_ptt,
 		     PGLUE_B_REG_MASTER_ZLR_ERR_DETAILS);

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c

@@ -4431,7 +4431,7 @@ void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
 			timeout = page_thresh;
 		else if (rtl8xxxu_dma_agg_pages <= 6)
 			dev_err(&priv->udev->dev,
-				"%s: dma_agg_pages=%i too small, minium is 6\n",
+				"%s: dma_agg_pages=%i too small, minimum is 6\n",
 				__func__, rtl8xxxu_dma_agg_pages);
 		else
 			dev_err(&priv->udev->dev,

drivers/scsi/aacraid/src.c

@@ -786,7 +786,7 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
 		if (!is_ctrl_up)
 			dev_err(&dev->pdev->dev, "IOP reset failed\n");
 		else {
-			dev_info(&dev->pdev->dev, "IOP reset succeded\n");
+			dev_info(&dev->pdev->dev, "IOP reset succeeded\n");
 			goto set_startup;
 		}
 	}
@@ -808,7 +808,7 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
 			ret = -ENODEV;
 			goto out;
 		} else
-			dev_info(&dev->pdev->dev, "SOFT reset succeded\n");
+			dev_info(&dev->pdev->dev, "SOFT reset succeeded\n");
 	}
 
 set_startup:

drivers/scsi/qedi/qedi_fw.c

@@ -1882,7 +1882,7 @@ static int qedi_map_scsi_sg(struct qedi_ctx *qedi, struct qedi_cmd *cmd)
 		bd[bd_count].sge_len = (u16)sg_len;
 
 		QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_IO,
-			  "single-cashed-sgl: bd_count:%d addr=%llx, len=%x",
+			  "single-cached-sgl: bd_count:%d addr=%llx, len=%x",
 			  sg_count, addr, sg_len);
 
 		return ++bd_count;

fs/orangefs/orangefs-utils.c

@@ -500,7 +500,7 @@ int orangefs_normalize_to_errno(__s32 error_code)
 	 * server.
 	 */
 	} else if (error_code > 0) {
-		gossip_err("orangefs: error status receieved.\n");
+		gossip_err("orangefs: error status received.\n");
 		gossip_err("orangefs: assuming error code is inverted.\n");
 		error_code = -error_code;
 	}