serial: core: remove baud_rates when serial console setup

Currently, when tring to set up a serial console with a higher
baud rate, it would fallback to 921600.

Tested-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/serial_core.c

@@ -1875,26 +1875,6 @@ uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow)
 }
 EXPORT_SYMBOL_GPL(uart_parse_options);
 
-struct baud_rates {
-	unsigned int rate;
-	unsigned int cflag;
-};
-
-static const struct baud_rates baud_rates[] = {
-	{ 921600, B921600 },
-	{ 460800, B460800 },
-	{ 230400, B230400 },
-	{ 115200, B115200 },
-	{  57600, B57600  },
-	{  38400, B38400  },
-	{  19200, B19200  },
-	{   9600, B9600   },
-	{   4800, B4800   },
-	{   2400, B2400   },
-	{   1200, B1200   },
-	{      0, B38400  }
-};
-
 /**
  *	uart_set_options - setup the serial console parameters
  *	@port: pointer to the serial ports uart_port structure
@@ -1910,7 +1890,6 @@ uart_set_options(struct uart_port *port, struct console *co,
 {
 	struct ktermios termios;
 	static struct ktermios dummy;
-	int i;
 
 	/*
 	 * Ensure that the serial console lock is initialised
@@ -1925,16 +1904,8 @@ uart_set_options(struct uart_port *port, struct console *co,
 
 	memset(&termios, 0, sizeof(struct ktermios));
 
-	termios.c_cflag = CREAD | HUPCL | CLOCAL;
-
-	/*
-	 * Construct a cflag setting.
-	 */
-	for (i = 0; baud_rates[i].rate; i++)
-		if (baud_rates[i].rate <= baud)
-			break;
-
-	termios.c_cflag |= baud_rates[i].cflag;
+	termios.c_cflag |= CREAD | HUPCL | CLOCAL;
+	tty_termios_encode_baud_rate(&termios, baud, baud);
 
 	if (bits == 7)
 		termios.c_cflag |= CS7;