Merge tag 'asoc-fix-v4.14-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.14

A bunch of fixes here, mostly device specific ones (the biggest one
being the revert of the hotword support for rt5514), with a couple of
core fixes for potential issues with corrupted or otherwise invalid
topology files.

Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935

@@ -14,3 +14,11 @@ Description:
 		Show or set the gain boost of the amp, from 0-31 range.
 		18 = indoors (default)
 		14 = outdoors
+
+What		/sys/bus/iio/devices/iio:deviceX/noise_level_tripped
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	Matt Ranostay <matt.ranostay@konsulko.com>
+Description:
+		When 1 the noise level is over the trip level and not reporting
+		valid data

Documentation/ABI/testing/sysfs-devices-power

@@ -211,7 +211,9 @@ Description:
 		device, after it has been suspended at run time, from a resume
 		request to the moment the device will be ready to process I/O,
 		in microseconds.  If it is equal to 0, however, this means that
-		the PM QoS resume latency may be arbitrary.
+		the PM QoS resume latency may be arbitrary and the special value
+		"n/a" means that user space cannot accept any resume latency at
+		all for the given device.
 
 		Not all drivers support this attribute.  If it isn't supported,
 		it is not present.

Documentation/ABI/testing/sysfs-kernel-mm-swap

@@ -14,13 +14,3 @@ Description:	Enable/disable VMA based swap readahead.
 		still used for tmpfs etc. other users.  If set to
 		false, the global swap readahead algorithm will be
 		used for all swappable pages.
-
-What:		/sys/kernel/mm/swap/vma_ra_max_order
-Date:		August 2017
-Contact:	Linux memory management mailing list <linux-mm@kvack.org>
-Description:	The max readahead size in order for VMA based swap readahead
-
-		VMA based swap readahead algorithm will readahead at
-		most 1 << max_order pages for each readahead.  The
-		real readahead size for each readahead will be scaled
-		according to the estimation algorithm.

Documentation/core-api/kernel-api.rst

@@ -352,44 +352,30 @@ Read-Copy Update (RCU)
 ----------------------
 
 .. kernel-doc:: include/linux/rcupdate.h
-   :external:
 
 .. kernel-doc:: include/linux/rcupdate_wait.h
-   :external:
 
 .. kernel-doc:: include/linux/rcutree.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/tree.c
-   :external:
 
 .. kernel-doc:: kernel/rcu/tree_plugin.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/tree_exp.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/update.c
-   :external:
 
 .. kernel-doc:: include/linux/srcu.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/srcutree.c
-   :external:
 
 .. kernel-doc:: include/linux/rculist_bl.h
-   :external:
 
 .. kernel-doc:: include/linux/rculist.h
-   :external:
 
 .. kernel-doc:: include/linux/rculist_nulls.h
-   :external:
 
 .. kernel-doc:: include/linux/rcu_sync.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/sync.c
-   :external:
 

Documentation/devicetree/bindings/iio/proximity/as3935.txt

@@ -16,6 +16,10 @@ Optional properties:
 	- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
 	  value 0 - 120pF. This will require using the calibration data from
 	  the manufacturer.
+	- ams,nflwdth: Set the noise and watchdog threshold register on
+	  startup. This will need to set according to the noise from the
+	  MCU board, and possibly the local environment. Refer to the
+	  datasheet for the threshold settings.
 
 Example:
 
@@ -27,4 +31,5 @@ as3935@0 {
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 1>;
 	ams,tuning-capacitor-pf = <80>;
+	ams,nflwdth = <0x44>;
 };

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

@@ -99,7 +99,7 @@ Examples:
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c200000 0 0x200000>;
+			reg = <0x0 0x2c200000 0 0x20000>;
 		};
 	};
 
@@ -124,14 +124,14 @@ Examples:
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c200000 0 0x200000>;
+			reg = <0x0 0x2c200000 0 0x20000>;
 		};
 
 		gic-its@2c400000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c400000 0 0x200000>;
+			reg = <0x0 0x2c400000 0 0x20000>;
 		};
 
 		ppi-partitions {

Documentation/kbuild/makefiles.txt

@@ -1108,14 +1108,6 @@ When kbuild executes, the following steps are followed (roughly):
     ld
 	Link target. Often, LDFLAGS_$@ is used to set specific options to ld.
 
-    objcopy
-	Copy binary. Uses OBJCOPYFLAGS usually specified in
-	arch/$(ARCH)/Makefile.
-	OBJCOPYFLAGS_$@ may be used to set additional options.
-
-    gzip
-	Compress target. Use maximum compression to compress target.
-
 	Example:
 		#arch/x86/boot/Makefile
 		LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
@@ -1139,6 +1131,19 @@ When kbuild executes, the following steps are followed (roughly):
 	      resulting in the target file being recompiled for no
 	      obvious reason.
 
+    objcopy
+	Copy binary. Uses OBJCOPYFLAGS usually specified in
+	arch/$(ARCH)/Makefile.
+	OBJCOPYFLAGS_$@ may be used to set additional options.
+
+    gzip
+	Compress target. Use maximum compression to compress target.
+
+	Example:
+		#arch/x86/boot/compressed/Makefile
+		$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
+			$(call if_changed,gzip)
+
     dtc
 	Create flattened device tree blob object suitable for linking
 	into vmlinux. Device tree blobs linked into vmlinux are placed
@@ -1219,7 +1224,7 @@ When kbuild executes, the following steps are followed (roughly):
 	that may be shared between individual architectures.
 	The recommended approach how to use a generic header file is
 	to list the file in the Kbuild file.
-	See "7.3 generic-y" for further info on syntax etc.
+	See "7.2 generic-y" for further info on syntax etc.
 
 --- 6.11 Post-link pass
 
@@ -1254,13 +1259,13 @@ A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
 arch/<arch>/include/asm/ to list asm files coming from asm-generic.
 See subsequent chapter for the syntax of the Kbuild file.
 
-	--- 7.1 no-export-headers
+--- 7.1 no-export-headers
 
 	no-export-headers is essentially used by include/uapi/linux/Kbuild to
 	avoid exporting specific headers (e.g. kvm.h) on architectures that do
 	not support it. It should be avoided as much as possible.
 
-	--- 7.2 generic-y
+--- 7.2 generic-y
 
 	If an architecture uses a verbatim copy of a header from
 	include/asm-generic then this is listed in the file
@@ -1287,7 +1292,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 		Example: termios.h
 			#include <asm-generic/termios.h>
 
-	--- 7.3 generated-y
+--- 7.3 generated-y
 
 	If an architecture generates other header files alongside generic-y
 	wrappers, generated-y specifies them.
@@ -1299,7 +1304,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 			#arch/x86/include/asm/Kbuild
 			generated-y += syscalls_32.h
 
-	--- 7.5 mandatory-y
+--- 7.4 mandatory-y
 
 	mandatory-y is essentially used by include/uapi/asm-generic/Kbuild.asm
 	to define the minimum set of headers that must be exported in

Documentation/networking/bonding.txt

@@ -2387,7 +2387,7 @@ broadcast: Like active-backup, there is not much advantage to this
 	and packet type ID), so in a "gatewayed" configuration, all
 	outgoing traffic will generally use the same device.  Incoming
 	traffic may also end up on a single device, but that is
-	dependent upon the balancing policy of the peer's 8023.ad
+	dependent upon the balancing policy of the peer's 802.3ad
 	implementation.  In a "local" configuration, traffic will be
 	distributed across the devices in the bond.
 

Documentation/process/index.rst

@@ -25,6 +25,7 @@ Below are the essential guides that every developer should read.
    submitting-patches
    coding-style
    email-clients
+   kernel-enforcement-statement
 
 Other guides to the community that are of interest to most developers are: 
 

Documentation/process/kernel-enforcement-statement.rst

@@ -0,0 +1,147 @@
+Linux Kernel Enforcement Statement
+----------------------------------
+
+As developers of the Linux kernel, we have a keen interest in how our software
+is used and how the license for our software is enforced.  Compliance with the
+reciprocal sharing obligations of GPL-2.0 is critical to the long-term
+sustainability of our software and community.
+
+Although there is a right to enforce the separate copyright interests in the
+contributions made to our community, we share an interest in ensuring that
+individual enforcement actions are conducted in a manner that benefits our
+community and do not have an unintended negative impact on the health and
+growth of our software ecosystem.  In order to deter unhelpful enforcement
+actions, we agree that it is in the best interests of our development
+community to undertake the following commitment to users of the Linux kernel
+on behalf of ourselves and any successors to our copyright interests:
+
+    Notwithstanding the termination provisions of the GPL-2.0, we agree that
+    it is in the best interests of our development community to adopt the
+    following provisions of GPL-3.0 as additional permissions under our
+    license with respect to any non-defensive assertion of rights under the
+    license.
+
+	However, if you cease all violation of this License, then your license
+	from a particular copyright holder is reinstated (a) provisionally,
+	unless and until the copyright holder explicitly and finally
+	terminates your license, and (b) permanently, if the copyright holder
+	fails to notify you of the violation by some reasonable means prior to
+	60 days after the cessation.
+
+	Moreover, your license from a particular copyright holder is
+	reinstated permanently if the copyright holder notifies you of the
+	violation by some reasonable means, this is the first time you have
+	received notice of violation of this License (for any work) from that
+	copyright holder, and you cure the violation prior to 30 days after
+	your receipt of the notice.
+
+Our intent in providing these assurances is to encourage more use of the
+software.  We want companies and individuals to use, modify and distribute
+this software.  We want to work with users in an open and transparent way to
+eliminate any uncertainty about our expectations regarding compliance or
+enforcement that might limit adoption of our software.  We view legal action
+as a last resort, to be initiated only when other community efforts have
+failed to resolve the problem.
+
+Finally, once a non-compliance issue is resolved, we hope the user will feel
+welcome to join us in our efforts on this project.  Working together, we will
+be stronger.
+
+Except where noted below, we speak only for ourselves, and not for any company
+we might work for today, have in the past, or will in the future.
+
+  - Bjorn Andersson (Linaro)
+  - Andrea Arcangeli (Red Hat)
+  - Neil Armstrong
+  - Jens Axboe
+  - Pablo Neira Ayuso
+  - Khalid Aziz
+  - Ralf Baechle
+  - Felipe Balbi
+  - Arnd Bergmann
+  - Ard Biesheuvel
+  - Paolo Bonzini (Red Hat)
+  - Christian Borntraeger
+  - Mark Brown (Linaro)
+  - Paul Burton
+  - Javier Martinez Canillas
+  - Rob Clark
+  - Jonathan Corbet
+  - Vivien Didelot (Savoir-faire Linux)
+  - Hans de Goede (Red Hat)
+  - Mel Gorman (SUSE)
+  - Sven Eckelmann
+  - Alex Elder (Linaro)
+  - Fabio Estevam
+  - Larry Finger
+  - Bhumika Goyal
+  - Andy Gross
+  - Juergen Gross
+  - Shawn Guo
+  - Ulf Hansson
+  - Tejun Heo
+  - Rob Herring
+  - Masami Hiramatsu
+  - Michal Hocko
+  - Simon Horman
+  - Johan Hovold (Hovold Consulting AB)
+  - Christophe JAILLET
+  - Olof Johansson
+  - Lee Jones (Linaro)
+  - Heiner Kallweit
+  - Srinivas Kandagatla
+  - Jan Kara
+  - Shuah Khan (Samsung)
+  - David Kershner
+  - Jaegeuk Kim
+  - Namhyung Kim
+  - Colin Ian King
+  - Jeff Kirsher
+  - Greg Kroah-Hartman (Linux Foundation)
+  - Christian König
+  - Vinod Koul
+  - Krzysztof Kozlowski
+  - Viresh Kumar
+  - Aneesh Kumar K.V
+  - Julia Lawall
+  - Doug Ledford (Red Hat)
+  - Chuck Lever (Oracle)
+  - Daniel Lezcano
+  - Shaohua Li
+  - Xin Long (Red Hat)
+  - Tony Luck
+  - Mike Marshall
+  - Chris Mason
+  - Paul E. McKenney
+  - David S. Miller
+  - Ingo Molnar
+  - Kuninori Morimoto
+  - Borislav Petkov
+  - Jiri Pirko
+  - Josh Poimboeuf
+  - Sebastian Reichel (Collabora)
+  - Guenter Roeck
+  - Joerg Roedel
+  - Leon Romanovsky
+  - Steven Rostedt (VMware)
+  - Ivan Safonov
+  - Ivan Safonov
+  - Anna Schumaker
+  - Jes Sorensen
+  - K.Y. Srinivasan
+  - Heiko Stuebner
+  - Jiri Kosina (SUSE)
+  - Dmitry Torokhov
+  - Linus Torvalds
+  - Thierry Reding
+  - Rik van Riel
+  - Geert Uytterhoeven (Glider bvba)
+  - Daniel Vetter
+  - Linus Walleij
+  - Richard Weinberger
+  - Dan Williams
+  - Rafael J. Wysocki
+  - Arvind Yadav
+  - Masahiro Yamada
+  - Wei Yongjun
+  - Lv Zheng

MAINTAINERS

@@ -5346,9 +5346,7 @@ M:	"J. Bruce Fields" <bfields@fieldses.org>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	include/linux/fcntl.h
-F:	include/linux/fs.h
 F:	include/uapi/linux/fcntl.h
-F:	include/uapi/linux/fs.h
 F:	fs/fcntl.c
 F:	fs/locks.c
 
@@ -5357,6 +5355,8 @@ M:	Alexander Viro <viro@zeniv.linux.org.uk>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	fs/*
+F:	include/linux/fs.h
+F:	include/uapi/linux/fs.h
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
 M:	Riku Voipio <riku.voipio@iki.fi>
@@ -7571,7 +7571,7 @@ F:	arch/mips/include/asm/kvm*
 F:	arch/mips/kvm/
 
 KERNEL VIRTUAL MACHINE FOR POWERPC (KVM/powerpc)
-M:	Alexander Graf <agraf@suse.com>
+M:	Paul Mackerras <paulus@ozlabs.org>
 L:	kvm-ppc@vger.kernel.org
 W:	http://www.linux-kvm.org/
 T:	git git://github.com/agraf/linux-2.6.git
@@ -9213,7 +9213,6 @@ F:	include/linux/isicom.h
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
 M:	Bin Liu <b-liu@ti.com>
 L:	linux-usb@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
 F:	drivers/usb/musb/
 
@@ -10180,7 +10179,6 @@ F:	Documentation/parport*.txt
 
 PARAVIRT_OPS INTERFACE
 M:	Juergen Gross <jgross@suse.com>
-M:	Chris Wright <chrisw@sous-sol.org>
 M:	Alok Kataria <akataria@vmware.com>
 M:	Rusty Russell <rusty@rustcorp.com.au>
 L:	virtualization@lists.linux-foundation.org
@@ -10560,6 +10558,8 @@ M:	Peter Zijlstra <peterz@infradead.org>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	Arnaldo Carvalho de Melo <acme@kernel.org>
 R:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+R:	Jiri Olsa <jolsa@redhat.com>
+R:	Namhyung Kim <namhyung@kernel.org>
 L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Supported

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc7
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -130,8 +130,8 @@ endif
 ifneq ($(KBUILD_OUTPUT),)
 # check that the output directory actually exists
 saved-output := $(KBUILD_OUTPUT)
-$(shell [ -d $(KBUILD_OUTPUT) ] || mkdir -p $(KBUILD_OUTPUT))
-KBUILD_OUTPUT := $(realpath $(KBUILD_OUTPUT))
+KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
+								&& /bin/pwd)
 $(if $(KBUILD_OUTPUT),, \
      $(error failed to create output directory "$(saved-output)"))
 
@@ -697,11 +697,11 @@ KBUILD_CFLAGS += $(stackp-flag)
 
 ifeq ($(cc-name),clang)
 ifneq ($(CROSS_COMPILE),)
-CLANG_TARGET	:= -target $(notdir $(CROSS_COMPILE:%-=%))
+CLANG_TARGET	:= --target=$(notdir $(CROSS_COMPILE:%-=%))
 GCC_TOOLCHAIN	:= $(realpath $(dir $(shell which $(LD)))/..)
 endif
 ifneq ($(GCC_TOOLCHAIN),)
-CLANG_GCC_TC	:= -gcc-toolchain $(GCC_TOOLCHAIN)
+CLANG_GCC_TC	:= --gcc-toolchain=$(GCC_TOOLCHAIN)
 endif
 KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
 KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
@@ -933,7 +933,11 @@ ifdef CONFIG_STACK_VALIDATION
   ifeq ($(has_libelf),1)
     objtool_target := tools/objtool FORCE
   else
-    $(warning "Cannot use CONFIG_STACK_VALIDATION, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
+    ifdef CONFIG_ORC_UNWINDER
+      $(error "Cannot generate ORC metadata for CONFIG_ORC_UNWINDER=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
+    else
+      $(warning "Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
+    endif
     SKIP_STACK_VALIDATION := 1
     export SKIP_STACK_VALIDATION
   endif
@@ -1395,7 +1399,7 @@ help:
 	@echo  '                    Build, install, and boot kernel before'
 	@echo  '                    running kselftest on it'
 	@echo  '  kselftest-clean - Remove all generated kselftest files'
-	@echo  '  kselftest-merge - Merge all the config dependencies of kselftest to existed'
+	@echo  '  kselftest-merge - Merge all the config dependencies of kselftest to existing'
 	@echo  '                    .config.'
 	@echo  ''
 	@echo 'Userspace tools targets:'

arch/Kconfig

@@ -937,9 +937,6 @@ config STRICT_MODULE_RWX
 	  and non-text memory will be made non-executable. This provides
 	  protection against certain security exploits (e.g. writing to text)
 
-config ARCH_WANT_RELAX_ORDER
-	bool
-
 config ARCH_HAS_REFCOUNT
 	bool
 	help

arch/alpha/kernel/sys_alcor.c

@@ -181,10 +181,10 @@ alcor_init_irq(void)
  * comes in on.  This makes interrupt processing much easier.
  */
 
-static int __init
+static int
 alcor_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[7][5] __initdata = {
+	static char irq_tab[7][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		/* note: IDSEL 17 is XLT only */
 		{16+13, 16+13, 16+13, 16+13, 16+13},	/* IdSel 17,  TULIP  */

arch/alpha/kernel/sys_cabriolet.c

@@ -173,10 +173,10 @@ pc164_init_irq(void)
  * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
  */
 
-static inline int __init
+static inline int
 eb66p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[5][5] __initdata = {
+	static char irq_tab[5][5] = {
 		/*INT  INTA  INTB  INTC   INTD */
 		{16+0, 16+0, 16+5,  16+9, 16+13},  /* IdSel 6,  slot 0, J25 */
 		{16+1, 16+1, 16+6, 16+10, 16+14},  /* IdSel 7,  slot 1, J26 */
@@ -203,10 +203,10 @@ eb66p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
  */
 
-static inline int __init
+static inline int
 cabriolet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[5][5] __initdata = {
+	static char irq_tab[5][5] = {
 		/*INT   INTA  INTB  INTC   INTD */
 		{ 16+2, 16+2, 16+7, 16+11, 16+15}, /* IdSel 5,  slot 2, J21 */
 		{ 16+0, 16+0, 16+5,  16+9, 16+13}, /* IdSel 6,  slot 0, J19 */
@@ -287,10 +287,10 @@ cia_cab_init_pci(void)
  * 
  */
 
-static inline int __init
+static inline int
 alphapc164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[7][5] __initdata = {
+	static char irq_tab[7][5] = {
 		/*INT   INTA  INTB   INTC   INTD */
 		{ 16+2, 16+2, 16+9,  16+13, 16+17}, /* IdSel  5, slot 2, J20 */
 		{ 16+0, 16+0, 16+7,  16+11, 16+15}, /* IdSel  6, slot 0, J29 */

arch/alpha/kernel/sys_dp264.c

@@ -356,7 +356,7 @@ clipper_init_irq(void)
  *  10	 64 bit PCI option slot 3 (not bus 0)
  */
 
-static int __init
+static int
 isa_irq_fixup(const struct pci_dev *dev, int irq)
 {
 	u8 irq8;
@@ -372,10 +372,10 @@ isa_irq_fixup(const struct pci_dev *dev, int irq)
 	return irq8 & 0xf;
 }
 
-static int __init
+static int
 dp264_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[6][5] __initdata = {
+	static char irq_tab[6][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 5 ISA Bridge */
 		{ 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/
@@ -394,10 +394,10 @@ dp264_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return isa_irq_fixup(dev, irq);
 }
 
-static int __init
+static int
 monet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[13][5] __initdata = {
+	static char irq_tab[13][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{    45,    45,    45,    45,    45}, /* IdSel 3 21143 PCI1 */
 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 4 unused */
@@ -423,7 +423,7 @@ monet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
 }
 
-static u8 __init
+static u8
 monet_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	struct pci_controller *hose = dev->sysdata;
@@ -456,10 +456,10 @@ monet_swizzle(struct pci_dev *dev, u8 *pinp)
 	return slot;
 }
 
-static int __init
+static int
 webbrick_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[13][5] __initdata = {
+	static char irq_tab[13][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 7 ISA Bridge */
 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 8 unused */
@@ -478,10 +478,10 @@ webbrick_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
 }
 
-static int __init
+static int
 clipper_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[7][5] __initdata = {
+	static char irq_tab[7][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{ 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */
 		{ 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */

arch/alpha/kernel/sys_eb64p.c

@@ -167,10 +167,10 @@ eb64p_init_irq(void)
  * comes in on.  This makes interrupt processing much easier.
  */
 
-static int __init
+static int
 eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[5][5] __initdata = {
+	static char irq_tab[5][5] = {
 		/*INT  INTA  INTB  INTC   INTD */
 		{16+7, 16+7, 16+7, 16+7,  16+7},  /* IdSel 5,  slot ?, ?? */
 		{16+0, 16+0, 16+2, 16+4,  16+9},  /* IdSel 6,  slot ?, ?? */

arch/alpha/kernel/sys_eiger.c

@@ -141,7 +141,7 @@ eiger_init_irq(void)
 	}
 }
 
-static int __init
+static int
 eiger_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	u8 irq_orig;
@@ -158,7 +158,7 @@ eiger_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return irq_orig - 0x80;
 }
 
-static u8 __init
+static u8
 eiger_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	struct pci_controller *hose = dev->sysdata;

arch/alpha/kernel/sys_miata.c

@@ -149,10 +149,10 @@ miata_init_irq(void)
  * comes in on.  This makes interrupt processing much easier.
  */
 
-static int __init
+static int
 miata_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-        static char irq_tab[18][5] __initdata = {
+        static char irq_tab[18][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{16+ 8, 16+ 8, 16+ 8, 16+ 8, 16+ 8},  /* IdSel 14,  DC21142 */
 		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 15,  EIDE    */
@@ -196,7 +196,7 @@ miata_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return COMMON_TABLE_LOOKUP;
 }
 
-static u8 __init
+static u8
 miata_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	int slot, pin = *pinp;

arch/alpha/kernel/sys_mikasa.c

@@ -145,10 +145,10 @@ mikasa_init_irq(void)
  * comes in on.  This makes interrupt processing much easier.
  */
 
-static int __init
+static int
 mikasa_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[8][5] __initdata = {
+	static char irq_tab[8][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{16+12, 16+12, 16+12, 16+12, 16+12},	/* IdSel 17,  SCSI */
 		{   -1,    -1,    -1,    -1,    -1},	/* IdSel 18,  PCEB */

arch/alpha/kernel/sys_nautilus.c

@@ -62,7 +62,7 @@ nautilus_init_irq(void)
 	common_init_isa_dma();
 }
 
-static int __init
+static int
 nautilus_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	/* Preserve the IRQ set up by the console.  */

arch/alpha/kernel/sys_noritake.c

@@ -193,10 +193,10 @@ noritake_init_irq(void)
  * comes in on.  This makes interrupt processing much easier.
  */
 
-static int __init
+static int
 noritake_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[15][5] __initdata = {
+	static char irq_tab[15][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		/* note: IDSELs 16, 17, and 25 are CORELLE only */
 		{ 16+1,  16+1,  16+1,  16+1,  16+1},  /* IdSel 16,  QLOGIC */
@@ -221,7 +221,7 @@ noritake_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return COMMON_TABLE_LOOKUP;
 }
 
-static u8 __init
+static u8
 noritake_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	int slot, pin = *pinp;

arch/alpha/kernel/sys_rawhide.c

@@ -221,10 +221,10 @@ rawhide_init_irq(void)
  * 
  */
 
-static int __init
+static int
 rawhide_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[5][5] __initdata = {
+	static char irq_tab[5][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{ 16+16, 16+16, 16+16, 16+16, 16+16}, /* IdSel 1 SCSI PCI 1 */
 		{ 16+ 0, 16+ 0, 16+ 1, 16+ 2, 16+ 3}, /* IdSel 2 slot 2 */

arch/alpha/kernel/sys_ruffian.c

@@ -117,10 +117,10 @@ ruffian_kill_arch (int mode)
  *
  */
 
-static int __init
+static int
 ruffian_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-        static char irq_tab[11][5] __initdata = {
+        static char irq_tab[11][5] = {
 	      /*INT  INTA INTB INTC INTD */
 		{-1,  -1,  -1,  -1,  -1},  /* IdSel 13,  21052	     */
 		{-1,  -1,  -1,  -1,  -1},  /* IdSel 14,  SIO	     */
@@ -139,7 +139,7 @@ ruffian_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return COMMON_TABLE_LOOKUP;
 }
 
-static u8 __init
+static u8
 ruffian_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	int slot, pin = *pinp;

arch/alpha/kernel/sys_rx164.c

@@ -142,7 +142,7 @@ rx164_init_irq(void)
  * 
  */
 
-static int __init
+static int
 rx164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 #if 0
@@ -156,7 +156,7 @@ rx164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	  { 16+1, 16+1, 16+6, 16+11, 16+16},      /* IdSel 10, slot 4 */
 	};
 #else
-	static char irq_tab[6][5] __initdata = {
+	static char irq_tab[6][5] = {
 	  /*INT   INTA  INTB  INTC   INTD */
 	  { 16+0, 16+0, 16+6, 16+11, 16+16},      /* IdSel 5,  slot 0 */
 	  { 16+1, 16+1, 16+7, 16+12, 16+17},      /* IdSel 6,  slot 1 */

arch/alpha/kernel/sys_sable.c

@@ -192,10 +192,10 @@ sable_init_irq(void)
  * with the values in the irq swizzling tables above.
  */
 
-static int __init
+static int
 sable_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[9][5] __initdata = {
+	static char irq_tab[9][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{ 32+0,  32+0,  32+0,  32+0,  32+0},  /* IdSel 0,  TULIP  */
 		{ 32+1,  32+1,  32+1,  32+1,  32+1},  /* IdSel 1,  SCSI   */
@@ -374,10 +374,10 @@ lynx_init_irq(void)
  * with the values in the irq swizzling tables above.
  */
 
-static int __init
+static int
 lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[19][5] __initdata = {
+	static char irq_tab[19][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 13,  PCEB   */
 		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 14,  PPB    */
@@ -404,7 +404,7 @@ lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return COMMON_TABLE_LOOKUP;
 }
 
-static u8 __init
+static u8
 lynx_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	int slot, pin = *pinp;

arch/alpha/kernel/sys_sio.c

@@ -144,7 +144,7 @@ sio_fixup_irq_levels(unsigned int level_bits)
 	outb((level_bits >> 8) & 0xff, 0x4d1);
 }
 
-static inline int __init
+static inline int
 noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	/*
@@ -165,7 +165,7 @@ noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	 * that they use the default INTA line, if they are interrupt
 	 * driven at all).
 	 */
-	static char irq_tab[][5] __initdata = {
+	static char irq_tab[][5] = {
 		/*INT A   B   C   D */
 		{ 3,  3,  3,  3,  3}, /* idsel  6 (53c810) */ 
 		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
@@ -183,10 +183,10 @@ noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return irq >= 0 ? tmp : -1;
 }
 
-static inline int __init
+static inline int
 p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[][5] __initdata = {
+	static char irq_tab[][5] = {
 		/*INT A   B   C   D */
 		{ 0,  0, -1, -1, -1}, /* idsel  6 (53c810) */
 		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */

arch/alpha/kernel/sys_sx164.c

@@ -94,10 +94,10 @@ sx164_init_irq(void)
  *   9  32 bit PCI option slot 3
  */
 
-static int __init
+static int
 sx164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[5][5] __initdata = {
+	static char irq_tab[5][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{ 16+ 9, 16+ 9, 16+13, 16+17, 16+21}, /* IdSel 5 slot 2 J17 */
 		{ 16+11, 16+11, 16+15, 16+19, 16+23}, /* IdSel 6 slot 0 J19 */

arch/alpha/kernel/sys_takara.c

@@ -155,10 +155,10 @@ takara_init_irq(void)
  * assign it whatever the hell IRQ we like and it doesn't matter.
  */
 
-static int __init
+static int
 takara_map_irq_srm(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[15][5] __initdata = {
+	static char irq_tab[15][5] = {
 		{ 16+3, 16+3, 16+3, 16+3, 16+3},   /* slot  6 == device 3 */
 		{ 16+2, 16+2, 16+2, 16+2, 16+2},   /* slot  7 == device 2 */
 		{ 16+1, 16+1, 16+1, 16+1, 16+1},   /* slot  8 == device 1 */
@@ -210,7 +210,7 @@ takara_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return COMMON_TABLE_LOOKUP;
 }
 
-static u8 __init
+static u8
 takara_swizzle(struct pci_dev *dev, u8 *pinp)
 {
 	int slot = PCI_SLOT(dev->devfn);

arch/alpha/kernel/sys_wildfire.c

@@ -288,10 +288,10 @@ wildfire_device_interrupt(unsigned long vector)
  *   7	 64 bit PCI 1 option slot 7
  */
 
-static int __init
+static int
 wildfire_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static char irq_tab[8][5] __initdata = {
+	static char irq_tab[8][5] = {
 		/*INT    INTA   INTB   INTC   INTD */
 		{ -1,    -1,    -1,    -1,    -1}, /* IdSel 0 ISA Bridge */
 		{ 36,    36,    36+1, 36+2, 36+3}, /* IdSel 1 SCSI builtin */

arch/arc/boot/dts/hsdk.dts

@@ -137,14 +137,15 @@
 			/*
 			 * DW sdio controller has external ciu clock divider
 			 * controlled via register in SDIO IP. Due to its
-			 * unexpected default value (it should devide by 1
-			 * but it devides by 8) SDIO IP uses wrong clock and
+			 * unexpected default value (it should divide by 1
+			 * but it divides by 8) SDIO IP uses wrong clock and
 			 * works unstable (see STAR 9001204800)
+			 * We switched to the minimum possible value of the
+			 * divisor (div-by-2) in HSDK platform code.
 			 * So add temporary fix and change clock frequency
-			 * from 100000000 to 12500000 Hz until we fix dw sdio
-			 * driver itself.
+			 * to 50000000 Hz until we fix dw sdio driver itself.
 			 */
-			clock-frequency = <12500000>;
+			clock-frequency = <50000000>;
 			#clock-cells = <0>;
 		};
 

arch/arc/configs/hsdk_defconfig

@@ -63,7 +63,6 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_RESET_HSDK=y
 CONFIG_EXT3_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y

arch/arc/kernel/smp.c

@@ -23,6 +23,8 @@
 #include <linux/cpumask.h>
 #include <linux/reboot.h>
 #include <linux/irqdomain.h>
+#include <linux/export.h>
+
 #include <asm/processor.h>
 #include <asm/setup.h>
 #include <asm/mach_desc.h>
@@ -30,6 +32,9 @@
 #ifndef CONFIG_ARC_HAS_LLSC
 arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
 arch_spinlock_t smp_bitops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+EXPORT_SYMBOL_GPL(smp_atomic_ops_lock);
+EXPORT_SYMBOL_GPL(smp_bitops_lock);
 #endif
 
 struct plat_smp_ops  __weak plat_smp_ops;

arch/arc/plat-hsdk/Kconfig

@@ -8,3 +8,4 @@
 menuconfig ARC_SOC_HSDK
 	bool "ARC HS Development Kit SOC"
 	select CLK_HSDK
+	select RESET_HSDK

arch/arc/plat-hsdk/platform.c

@@ -74,6 +74,10 @@ static void __init hsdk_set_cpu_freq_1ghz(void)
 		pr_err("Failed to setup CPU frequency to 1GHz!");
 }
 
+#define SDIO_BASE		(ARC_PERIPHERAL_BASE + 0xA000)
+#define SDIO_UHS_REG_EXT	(SDIO_BASE + 0x108)
+#define SDIO_UHS_REG_EXT_DIV_2	(2 << 30)
+
 static void __init hsdk_init_early(void)
 {
 	/*
@@ -89,6 +93,12 @@ static void __init hsdk_init_early(void)
 	/* Really apply settings made above */
 	writel(1, (void __iomem *) CREG_PAE_UPDATE);
 
+	/*
+	 * Switch SDIO external ciu clock divider from default div-by-8 to
+	 * minimum possible div-by-2.
+	 */
+	iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT);
+
 	/*
 	 * Setup CPU frequency to 1GHz.
 	 * TODO: remove it after smart hsdk pll driver will be introduced.

arch/arm/Makefile

@@ -131,7 +131,7 @@ endif
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
 KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
-CHECKFLAGS	+= -D__arm__
+CHECKFLAGS	+= -D__arm__ -m32
 
 #Default value
 head-y		:= arch/arm/kernel/head$(MMUEXT).o

arch/arm/boot/compressed/debug.S

@@ -23,7 +23,11 @@ ENTRY(putc)
 	strb	r0, [r1]
 	mov	r0, #0x03		@ SYS_WRITEC
    ARM(	svc	#0x123456	)
+#ifdef CONFIG_CPU_V7M
+ THUMB(	bkpt	#0xab		)
+#else
  THUMB(	svc	#0xab		)
+#endif
 	mov	pc, lr
 	.align	2
 1:	.word	_GLOBAL_OFFSET_TABLE_ - .

arch/arm/boot/dts/armada-38x.dtsi

@@ -178,7 +178,7 @@
 			};
 
 			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -189,7 +189,7 @@
 			};
 
 			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11100 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm/boot/dts/at91-sama5d27_som1.dtsi

@@ -67,8 +67,8 @@
 				pinctrl-0 = <&pinctrl_macb0_default>;
 				phy-mode = "rmii";
 
-				ethernet-phy@1 {
-					reg = <0x1>;
+				ethernet-phy@0 {
+					reg = <0x0>;
 					interrupt-parent = <&pioA>;
 					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
 					pinctrl-names = "default";

arch/arm/boot/dts/at91-sama5d2_xplained.dts

@@ -309,7 +309,7 @@
 				vddana-supply = <&vdd_3v3_lp_reg>;
 				vref-supply = <&vdd_3v3_lp_reg>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_adc_default>;
+				pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
 				status = "okay";
 			};
 
@@ -340,6 +340,20 @@
 					bias-disable;
 				};
 
+				/*
+				 * The ADTRG pin can work on any edge type.
+				 * In here it's being pulled up, so need to
+				 * connect it to ground to get an edge e.g.
+				 * Trigger can be configured on falling, rise
+				 * or any edge, and the pull-up can be changed
+				 * to pull-down or left floating according to
+				 * needs.
+				 */
+				pinctrl_adtrg_default: adtrg_default {
+					pinmux = <PIN_PD31__ADTRG>;
+					bias-pull-up;
+				};
+
 				pinctrl_charger_chglev: charger_chglev {
 					pinmux = <PIN_PA12__GPIO>;
 					bias-disable;

arch/arm/boot/dts/bcm2835-rpi-zero-w.dts

@@ -18,12 +18,9 @@
 	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
 	model = "Raspberry Pi Zero W";
 
-	/* Needed by firmware to properly init UARTs */
-	aliases {
-		uart0 = "/soc/serial@7e201000";
-		uart1 = "/soc/serial@7e215040";
-		serial0 = "/soc/serial@7e201000";
-		serial1 = "/soc/serial@7e215040";
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
 	};
 
 	leds {

arch/arm/boot/dts/bcm2837-rpi-3-b.dts

@@ -8,6 +8,11 @@
 	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
 	model = "Raspberry Pi 3 Model B";
 
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
 	memory {
 		reg = <0 0x40000000>;
 	};

arch/arm/boot/dts/bcm283x.dtsi

@@ -20,8 +20,13 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	chosen {
-		bootargs = "earlyprintk console=ttyAMA0";
+		stdout-path = "serial0:115200n8";
 	};
 
 	thermal-zones {

arch/arm/boot/dts/gemini.dtsi

@@ -145,11 +145,12 @@
 		};
 
 		watchdog@41000000 {
-			compatible = "cortina,gemini-watchdog";
+			compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
 			reg = <0x41000000 0x1000>;
 			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&syscon GEMINI_RESET_WDOG>;
 			clocks = <&syscon GEMINI_CLK_APB>;
+			clock-names = "PCLK";
 		};
 
 		uart0: serial@42000000 {

arch/arm/boot/dts/imx7d.dtsi

@@ -144,10 +144,10 @@
 		interrupt-names = "msi";
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
 			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
 			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;

arch/arm/boot/dts/moxart.dtsi

@@ -87,9 +87,10 @@
 		};
 
 		watchdog: watchdog@98500000 {
-			compatible = "moxa,moxart-watchdog";
+			compatible = "moxa,moxart-watchdog", "faraday,ftwdt010";
 			reg = <0x98500000 0x10>;
 			clocks = <&clk_apb>;
+			clock-names = "PCLK";
 		};
 
 		sdhci: sdhci@98e00000 {

arch/arm/boot/dts/sama5d2.dtsi

@@ -1430,6 +1430,7 @@
 				atmel,min-sample-rate-hz = <200000>;
 				atmel,max-sample-rate-hz = <20000000>;
 				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -311,8 +311,8 @@
 					#size-cells = <0>;
 					reg = <0>;
 
-					tcon1_in_drc1: endpoint@0 {
-						reg = <0>;
+					tcon1_in_drc1: endpoint@1 {
+						reg = <1>;
 						remote-endpoint = <&drc1_out_tcon1>;
 					};
 				};
@@ -1012,8 +1012,8 @@
 					#size-cells = <0>;
 					reg = <1>;
 
-					be1_out_drc1: endpoint@0 {
-						reg = <0>;
+					be1_out_drc1: endpoint@1 {
+						reg = <1>;
 						remote-endpoint = <&drc1_in_be1>;
 					};
 				};
@@ -1042,8 +1042,8 @@
 					#size-cells = <0>;
 					reg = <0>;
 
-					drc1_in_be1: endpoint@0 {
-						reg = <0>;
+					drc1_in_be1: endpoint@1 {
+						reg = <1>;
 						remote-endpoint = <&be1_out_drc1>;
 					};
 				};
@@ -1053,8 +1053,8 @@
 					#size-cells = <0>;
 					reg = <1>;
 
-					drc1_out_tcon1: endpoint@0 {
-						reg = <0>;
+					drc1_out_tcon1: endpoint@1 {
+						reg = <1>;
 						remote-endpoint = <&tcon1_in_drc1>;
 					};
 				};

arch/arm/kernel/debug.S

@@ -115,7 +115,11 @@ ENTRY(printascii)
 		mov	r1, r0
 		mov	r0, #0x04		@ SYS_WRITE0
 	ARM(	svc	#0x123456	)
+#ifdef CONFIG_CPU_V7M
+	THUMB(	bkpt	#0xab		)
+#else
 	THUMB(	svc	#0xab		)
+#endif
 		ret	lr
 ENDPROC(printascii)
 
@@ -124,7 +128,11 @@ ENTRY(printch)
 		strb	r0, [r1]
 		mov	r0, #0x03		@ SYS_WRITEC
 	ARM(	svc	#0x123456	)
+#ifdef CONFIG_CPU_V7M
+	THUMB(	bkpt	#0xab		)
+#else
 	THUMB(	svc	#0xab		)
+#endif
 		ret	lr
 ENDPROC(printch)
 

arch/arm/mach-ux500/cpu-db8500.c

@@ -32,6 +32,7 @@
 #include <asm/mach/arch.h>
 
 #include "db8500-regs.h"
+#include "pm_domains.h"
 
 static int __init ux500_l2x0_unlock(void)
 {
@@ -157,6 +158,9 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
 
 static void __init u8500_init_machine(void)
 {
+	/* Initialize ux500 power domains */
+	ux500_pm_domains_init();
+
 	/* automatically probe child nodes of dbx5x0 devices */
 	if (of_machine_is_compatible("st-ericsson,u8540"))
 		of_platform_populate(NULL, u8500_local_bus_nodes,

arch/arm/mach-ux500/pm.c

@@ -19,7 +19,6 @@
 #include <linux/of_address.h>
 
 #include "db8500-regs.h"
-#include "pm_domains.h"
 
 /* ARM WFI Standby signal register */
 #define PRCM_ARM_WFI_STANDBY    (prcmu_base + 0x130)
@@ -203,7 +202,4 @@ void __init ux500_pm_init(u32 phy_base, u32 size)
 
 	/* Set up ux500 suspend callbacks. */
 	suspend_set_ops(UX500_SUSPEND_OPS);
-
-	/* Initialize ux500 power domains */
-	ux500_pm_domains_init();
 }

arch/arm/mm/nommu.c

@@ -344,6 +344,11 @@ void __init arm_mm_memblock_reserve(void)
 	 * reserved here.
 	 */
 #endif
+	/*
+	 * In any case, always ensure address 0 is never used as many things
+	 * get very confused if 0 is returned as a legitimate address.
+	 */
+	memblock_reserve(0, 1);
 }
 
 void __init adjust_lowmem_bounds(void)

arch/arm/xen/p2m.c

@@ -1,7 +1,7 @@
 #include <linux/bootmem.h>
 #include <linux/gfp.h>
 #include <linux/export.h>
-#include <linux/rwlock.h>
+#include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/dma-mapping.h>

arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts

@@ -61,13 +61,6 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
-
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
 };
 
 &ehci0 {
@@ -91,7 +84,7 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dcdc1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	disable-wp;

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -336,7 +336,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xf6000000 0  0xf6000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			num-lanes = <1>;
 			clocks = <&cpm_clk 1 13>;
@@ -362,7 +362,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xf7000000 0  0xf7000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;
@@ -389,7 +389,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xf8000000 0  0xf8000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;

arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -335,7 +335,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xfa000000 0  0xfa000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
 			num-lanes = <1>;
 			clocks = <&cps_clk 1 13>;
@@ -361,7 +361,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xfb000000 0  0xfb000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;
@@ -388,7 +388,7 @@
 				/* non-prefetchable memory */
 				0x82000000 0 0xfc000000 0  0xfc000000 0 0xf00000>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
 
 			num-lanes = <1>;

arch/arm64/boot/dts/renesas/salvator-common.dtsi

@@ -62,6 +62,7 @@
 		brightness-levels = <256 128 64 16 8 4 0>;
 		default-brightness-level = <6>;
 
+		power-supply = <&reg_12v>;
 		enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -83,6 +84,15 @@
 		regulator-always-on;
 	};
 
+	reg_12v: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	rsnd_ak4613: sound {
 		compatible = "simple-audio-card";
 

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -582,7 +582,7 @@
 	vop_mmu: iommu@ff373f00 {
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff373f00 0x0 0x100>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "vop_mmu";
 		#iommu-cells = <0>;
 		status = "disabled";

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -740,7 +740,7 @@
 	iep_mmu: iommu@ff900800 {
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff900800 0x0 0x100>;
-		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "iep_mmu";
 		#iommu-cells = <0>;
 		status = "disabled";

arch/arm64/boot/dts/rockchip/rk3399-firefly.dts

@@ -371,10 +371,10 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-max-microvolt = <3000000>;
 				regulator-state-mem {
 					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
+					regulator-suspend-microvolt = <3000000>;
 				};
 			};
 

arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi

@@ -325,12 +325,12 @@
 			vcc_sd: LDO_REG4 {
 				regulator-name = "vcc_sd";
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-max-microvolt = <3000000>;
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
+					regulator-suspend-microvolt = <3000000>;
 				};
 			};
 

arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi

@@ -315,10 +315,10 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-max-microvolt = <3000000>;
 				regulator-state-mem {
 					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
+					regulator-suspend-microvolt = <3000000>;
 				};
 			};
 

arch/mips/include/asm/cmpxchg.h

@@ -155,14 +155,16 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 		return __cmpxchg_small(ptr, old, new, size);
 
 	case 4:
-		return __cmpxchg_asm("ll", "sc", (volatile u32 *)ptr, old, new);
+		return __cmpxchg_asm("ll", "sc", (volatile u32 *)ptr,
+				     (u32)old, new);
 
 	case 8:
 		/* lld/scd are only available for MIPS64 */
 		if (!IS_ENABLED(CONFIG_64BIT))
 			return __cmpxchg_called_with_bad_pointer();
 
-		return __cmpxchg_asm("lld", "scd", (volatile u64 *)ptr, old, new);
+		return __cmpxchg_asm("lld", "scd", (volatile u64 *)ptr,
+				     (u64)old, new);
 
 	default:
 		return __cmpxchg_called_with_bad_pointer();

arch/mips/loongson32/common/platform.c

@@ -183,18 +183,20 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
 }
 
 static struct plat_stmmacenet_data ls1x_eth0_pdata = {
-	.bus_id		= 0,
-	.phy_addr	= -1,
+	.bus_id			= 0,
+	.phy_addr		= -1,
 #if defined(CONFIG_LOONGSON1_LS1B)
-	.interface	= PHY_INTERFACE_MODE_MII,
+	.interface		= PHY_INTERFACE_MODE_MII,
 #elif defined(CONFIG_LOONGSON1_LS1C)
-	.interface	= PHY_INTERFACE_MODE_RMII,
+	.interface		= PHY_INTERFACE_MODE_RMII,
 #endif
-	.mdio_bus_data	= &ls1x_mdio_bus_data,
-	.dma_cfg	= &ls1x_eth_dma_cfg,
-	.has_gmac	= 1,
-	.tx_coe		= 1,
-	.init		= ls1x_eth_mux_init,
+	.mdio_bus_data		= &ls1x_mdio_bus_data,
+	.dma_cfg		= &ls1x_eth_dma_cfg,
+	.has_gmac		= 1,
+	.tx_coe			= 1,
+	.rx_queues_to_use	= 1,
+	.tx_queues_to_use	= 1,
+	.init			= ls1x_eth_mux_init,
 };
 
 static struct resource ls1x_eth0_resources[] = {
@@ -222,14 +224,16 @@ struct platform_device ls1x_eth0_pdev = {
 
 #ifdef CONFIG_LOONGSON1_LS1B
 static struct plat_stmmacenet_data ls1x_eth1_pdata = {
-	.bus_id		= 1,
-	.phy_addr	= -1,
-	.interface	= PHY_INTERFACE_MODE_MII,
-	.mdio_bus_data	= &ls1x_mdio_bus_data,
-	.dma_cfg	= &ls1x_eth_dma_cfg,
-	.has_gmac	= 1,
-	.tx_coe		= 1,
-	.init		= ls1x_eth_mux_init,
+	.bus_id			= 1,
+	.phy_addr		= -1,
+	.interface		= PHY_INTERFACE_MODE_MII,
+	.mdio_bus_data		= &ls1x_mdio_bus_data,
+	.dma_cfg		= &ls1x_eth_dma_cfg,
+	.has_gmac		= 1,
+	.tx_coe			= 1,
+	.rx_queues_to_use	= 1,
+	.tx_queues_to_use	= 1,
+	.init			= ls1x_eth_mux_init,
 };
 
 static struct resource ls1x_eth1_resources[] = {

arch/mips/math-emu/cp1emu.c

@@ -2558,7 +2558,6 @@ dcopuop:
 					break;
 				default:
 					/* Reserved R6 ops */
-					pr_err("Reserved MIPS R6 CMP.condn.S operation\n");
 					return SIGILL;
 				}
 			}
@@ -2719,7 +2718,6 @@ dcopuop:
 					break;
 				default:
 					/* Reserved R6 ops */
-					pr_err("Reserved MIPS R6 CMP.condn.D operation\n");
 					return SIGILL;
 				}
 			}

arch/mips/net/ebpf_jit.c

@@ -667,7 +667,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 {
 	int src, dst, r, td, ts, mem_off, b_off;
 	bool need_swap, did_move, cmp_eq;
-	unsigned int target;
+	unsigned int target = 0;
 	u64 t64;
 	s64 t64s;
 	int bpf_op = BPF_OP(insn->code);

arch/mips/tools/generic-board-config.sh

@@ -30,8 +30,6 @@ cfg="$4"
 boards_origin="$5"
 shift 5
 
-cd "${srctree}"
-
 # Only print Skipping... lines if the user explicitly specified BOARDS=. In the
 # general case it only serves to obscure the useful output about what actually
 # was included.
@@ -48,7 +46,7 @@ environment*)
 esac
 
 for board in $@; do
-	board_cfg="arch/mips/configs/generic/board-${board}.config"
+	board_cfg="${srctree}/arch/mips/configs/generic/board-${board}.config"
 	if [ ! -f "${board_cfg}" ]; then
 		echo "WARNING: Board config '${board_cfg}' not found"
 		continue
@@ -84,7 +82,7 @@ for board in $@; do
 	done || continue
 
 	# Merge this board config fragment into our final config file
-	./scripts/kconfig/merge_config.sh \
+	${srctree}/scripts/kconfig/merge_config.sh \
 		-m -O ${objtree} ${cfg} ${board_cfg} \
 		| grep -Ev '^(#|Using)'
 done

arch/parisc/kernel/parisc_ksyms.c

@@ -35,12 +35,12 @@ EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(__xchg8);
 EXPORT_SYMBOL(__xchg32);
 EXPORT_SYMBOL(__cmpxchg_u32);
+EXPORT_SYMBOL(__cmpxchg_u64);
 #ifdef CONFIG_SMP
 EXPORT_SYMBOL(__atomic_hash);
 #endif
 #ifdef CONFIG_64BIT
 EXPORT_SYMBOL(__xchg64);
-EXPORT_SYMBOL(__cmpxchg_u64);
 #endif
 
 #include <linux/uaccess.h>

arch/parisc/kernel/syscall.S

@@ -742,7 +742,7 @@ lws_compare_and_swap_2:
 10:	ldd	0(%r25), %r25
 11:	ldd	0(%r24), %r24
 #else
-	/* Load new value into r22/r23 - high/low */
+	/* Load old value into r22/r23 - high/low */
 10:	ldw	0(%r25), %r22
 11:	ldw	4(%r25), %r23
 	/* Load new value into fr4 for atomic store later */
@@ -834,11 +834,11 @@ cas2_action:
 	copy	%r0, %r28
 #else
 	/* Compare first word */
-19:	ldw,ma	0(%r26), %r29
+19:	ldw	0(%r26), %r29
 	sub,=	%r29, %r22, %r0
 	b,n	cas2_end
 	/* Compare second word */
-20:	ldw,ma	4(%r26), %r29
+20:	ldw	4(%r26), %r29
 	sub,=	%r29, %r23, %r0
 	b,n	cas2_end
 	/* Perform the store */

arch/parisc/kernel/time.c

@@ -253,7 +253,10 @@ static int __init init_cr16_clocksource(void)
 		cpu0_loc = per_cpu(cpu_data, 0).cpu_loc;
 
 		for_each_online_cpu(cpu) {
-			if (cpu0_loc == per_cpu(cpu_data, cpu).cpu_loc)
+			if (cpu == 0)
+				continue;
+			if ((cpu0_loc != 0) &&
+			    (cpu0_loc == per_cpu(cpu_data, cpu).cpu_loc))
 				continue;
 
 			clocksource_cr16.name = "cr16_unstable";

arch/powerpc/kernel/exceptions-64s.S

@@ -734,7 +734,29 @@ EXC_REAL(program_check, 0x700, 0x100)
 EXC_VIRT(program_check, 0x4700, 0x100, 0x700)
 TRAMP_KVM(PACA_EXGEN, 0x700)
 EXC_COMMON_BEGIN(program_check_common)
-	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
+	/*
+	 * It's possible to receive a TM Bad Thing type program check with
+	 * userspace register values (in particular r1), but with SRR1 reporting
+	 * that we came from the kernel. Normally that would confuse the bad
+	 * stack logic, and we would report a bad kernel stack pointer. Instead
+	 * we switch to the emergency stack if we're taking a TM Bad Thing from
+	 * the kernel.
+	 */
+	li	r10,MSR_PR		/* Build a mask of MSR_PR ..	*/
+	oris	r10,r10,0x200000@h	/* .. and SRR1_PROGTM		*/
+	and	r10,r10,r12		/* Mask SRR1 with that.		*/
+	srdi	r10,r10,8		/* Shift it so we can compare	*/
+	cmpldi	r10,(0x200000 >> 8)	/* .. with an immediate.	*/
+	bne 1f				/* If != go to normal path.	*/
+
+	/* SRR1 had PR=0 and SRR1_PROGTM=1, so use the emergency stack	*/
+	andi.	r10,r12,MSR_PR;		/* Set CR0 correctly for label	*/
+					/* 3 in EXCEPTION_PROLOG_COMMON	*/
+	mr	r10,r1			/* Save r1			*/
+	ld	r1,PACAEMERGSP(r13)	/* Use emergency stack		*/
+	subi	r1,r1,INT_FRAME_SIZE	/* alloc stack frame		*/
+	b 3f				/* Jump into the macro !!	*/
+1:	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
 	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD

arch/powerpc/kernel/signal_64.c

@@ -452,9 +452,20 @@ static long restore_tm_sigcontexts(struct task_struct *tsk,
 	if (MSR_TM_RESV(msr))
 		return -EINVAL;
 
-	/* pull in MSR TM from user context */
+	/* pull in MSR TS bits from user context */
 	regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr & MSR_TS_MASK);
 
+	/*
+	 * Ensure that TM is enabled in regs->msr before we leave the signal
+	 * handler. It could be the case that (a) user disabled the TM bit
+	 * through the manipulation of the MSR bits in uc_mcontext or (b) the
+	 * TM bit was disabled because a sufficient number of context switches
+	 * happened whilst in the signal handler and load_tm overflowed,
+	 * disabling the TM bit. In either case we can end up with an illegal
+	 * TM state leading to a TM Bad Thing when we return to userspace.
+	 */
+	regs->msr |= MSR_TM;
+
 	/* pull in MSR LE from user context */
 	regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
 

arch/powerpc/kernel/trace/ftrace_64_mprofile.S

@@ -181,34 +181,25 @@ _GLOBAL(ftrace_stub)
 	 *  - we have no stack frame and can not allocate one
 	 *  - LR points back to the original caller (in A)
 	 *  - CTR holds the new NIP in C
-	 *  - r0 & r12 are free
-	 *
-	 * r0 can't be used as the base register for a DS-form load or store, so
-	 * we temporarily shuffle r1 (stack pointer) into r0 and then put it back.
+	 *  - r0, r11 & r12 are free
 	 */
 livepatch_handler:
 	CURRENT_THREAD_INFO(r12, r1)
 
-	/* Save stack pointer into r0 */
-	mr	r0, r1
-
 	/* Allocate 3 x 8 bytes */
-	ld	r1, TI_livepatch_sp(r12)
-	addi	r1, r1, 24
-	std	r1, TI_livepatch_sp(r12)
+	ld	r11, TI_livepatch_sp(r12)
+	addi	r11, r11, 24
+	std	r11, TI_livepatch_sp(r12)
 
 	/* Save toc & real LR on livepatch stack */
-	std	r2,  -24(r1)
+	std	r2,  -24(r11)
 	mflr	r12
-	std	r12, -16(r1)
+	std	r12, -16(r11)
 
 	/* Store stack end marker */
 	lis     r12, STACK_END_MAGIC@h
 	ori     r12, r12, STACK_END_MAGIC@l
-	std	r12, -8(r1)
-
-	/* Restore real stack pointer */
-	mr	r1, r0
+	std	r12, -8(r11)
 
 	/* Put ctr in r12 for global entry and branch there */
 	mfctr	r12
@@ -216,36 +207,30 @@ livepatch_handler:
 
 	/*
 	 * Now we are returning from the patched function to the original
-	 * caller A. We are free to use r0 and r12, and we can use r2 until we
+	 * caller A. We are free to use r11, r12 and we can use r2 until we
 	 * restore it.
 	 */
 
 	CURRENT_THREAD_INFO(r12, r1)
 
-	/* Save stack pointer into r0 */
-	mr	r0, r1
-
-	ld	r1, TI_livepatch_sp(r12)
+	ld	r11, TI_livepatch_sp(r12)
 
 	/* Check stack marker hasn't been trashed */
 	lis     r2,  STACK_END_MAGIC@h
 	ori     r2,  r2, STACK_END_MAGIC@l
-	ld	r12, -8(r1)
+	ld	r12, -8(r11)
 1:	tdne	r12, r2
 	EMIT_BUG_ENTRY 1b, __FILE__, __LINE__ - 1, 0
 
 	/* Restore LR & toc from livepatch stack */
-	ld	r12, -16(r1)
+	ld	r12, -16(r11)
 	mtlr	r12
-	ld	r2,  -24(r1)
+	ld	r2,  -24(r11)
 
 	/* Pop livepatch stack frame */
-	CURRENT_THREAD_INFO(r12, r0)
-	subi	r1, r1, 24
-	std	r1, TI_livepatch_sp(r12)
-
-	/* Restore real stack pointer */
-	mr	r1, r0
+	CURRENT_THREAD_INFO(r12, r1)
+	subi	r11, r11, 24
+	std	r11, TI_livepatch_sp(r12)
 
 	/* Return to original caller of live patched function */
 	blr

arch/powerpc/kvm/book3s_64_vio.c

@@ -478,28 +478,30 @@ long kvmppc_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
 		return ret;
 
 	dir = iommu_tce_direction(tce);
+
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
+
 	if ((dir != DMA_NONE) && kvmppc_gpa_to_ua(vcpu->kvm,
-			tce & ~(TCE_PCI_READ | TCE_PCI_WRITE), &ua, NULL))
-		return H_PARAMETER;
+			tce & ~(TCE_PCI_READ | TCE_PCI_WRITE), &ua, NULL)) {
+		ret = H_PARAMETER;
+		goto unlock_exit;
+	}
 
 	entry = ioba >> stt->page_shift;
 
 	list_for_each_entry_lockless(stit, &stt->iommu_tables, next) {
-		if (dir == DMA_NONE) {
+		if (dir == DMA_NONE)
 			ret = kvmppc_tce_iommu_unmap(vcpu->kvm,
 					stit->tbl, entry);
-		} else {
-			idx = srcu_read_lock(&vcpu->kvm->srcu);
+		else
 			ret = kvmppc_tce_iommu_map(vcpu->kvm, stit->tbl,
 					entry, ua, dir);
-			srcu_read_unlock(&vcpu->kvm->srcu, idx);
-		}
 
 		if (ret == H_SUCCESS)
 			continue;
 
 		if (ret == H_TOO_HARD)
-			return ret;
+			goto unlock_exit;
 
 		WARN_ON_ONCE(1);
 		kvmppc_clear_tce(stit->tbl, entry);
@@ -507,7 +509,10 @@ long kvmppc_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
 
 	kvmppc_tce_put(stt, entry, tce);
 
-	return H_SUCCESS;
+unlock_exit:
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(kvmppc_h_put_tce);
 

arch/powerpc/kvm/book3s_hv_rmhandlers.S

@@ -989,13 +989,14 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300)
 	beq	no_xive
 	ld	r11, VCPU_XIVE_SAVED_STATE(r4)
 	li	r9, TM_QW1_OS
-	stdcix	r11,r9,r10
 	eieio
+	stdcix	r11,r9,r10
 	lwz	r11, VCPU_XIVE_CAM_WORD(r4)
 	li	r9, TM_QW1_OS + TM_WORD2
 	stwcix	r11,r9,r10
 	li	r9, 1
 	stw	r9, VCPU_XIVE_PUSHED(r4)
+	eieio
 no_xive:
 #endif /* CONFIG_KVM_XICS */
 
@@ -1310,6 +1311,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	bne	3f
 BEGIN_FTR_SECTION
 	PPC_MSGSYNC
+	lwsync
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
 	lbz	r0, HSTATE_HOST_IPI(r13)
 	cmpwi	r0, 0
@@ -1400,8 +1402,8 @@ guest_exit_cont:		/* r9 = vcpu, r12 = trap, r13 = paca */
 	cmpldi	cr0, r10, 0
 	beq	1f
 	/* First load to pull the context, we ignore the value */
-	lwzx	r11, r7, r10
 	eieio
+	lwzx	r11, r7, r10
 	/* Second load to recover the context state (Words 0 and 1) */
 	ldx	r11, r6, r10
 	b	3f
@@ -1409,8 +1411,8 @@ guest_exit_cont:		/* r9 = vcpu, r12 = trap, r13 = paca */
 	cmpldi	cr0, r10, 0
 	beq	1f
 	/* First load to pull the context, we ignore the value */
-	lwzcix	r11, r7, r10
 	eieio
+	lwzcix	r11, r7, r10
 	/* Second load to recover the context state (Words 0 and 1) */
 	ldcix	r11, r6, r10
 3:	std	r11, VCPU_XIVE_SAVED_STATE(r9)
@@ -1420,6 +1422,7 @@ guest_exit_cont:		/* r9 = vcpu, r12 = trap, r13 = paca */
 	stw	r10, VCPU_XIVE_PUSHED(r9)
 	stb	r10, (VCPU_XIVE_SAVED_STATE+3)(r9)
 	stb	r0, (VCPU_XIVE_SAVED_STATE+4)(r9)
+	eieio
 1:
 #endif /* CONFIG_KVM_XICS */
 	/* Save more register state  */
@@ -2788,6 +2791,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 	PPC_MSGCLR(6)
 	/* see if it's a host IPI */
 	li	r3, 1
+BEGIN_FTR_SECTION
+	PPC_MSGSYNC
+	lwsync
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
 	lbz	r0, HSTATE_HOST_IPI(r13)
 	cmpwi	r0, 0
 	bnelr

arch/powerpc/kvm/powerpc.c

@@ -644,8 +644,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		break;
 #endif
 	case KVM_CAP_PPC_HTM:
-		r = cpu_has_feature(CPU_FTR_TM_COMP) &&
-		    is_kvmppc_hv_enabled(kvm);
+		r = cpu_has_feature(CPU_FTR_TM_COMP) && hv_enabled;
 		break;
 	default:
 		r = 0;

arch/powerpc/lib/sstep.c

@@ -1684,11 +1684,13 @@ int analyse_instr(struct instruction_op *op, const struct pt_regs *regs,
  * Logical instructions
  */
 		case 26:	/* cntlzw */
-			op->val = __builtin_clz((unsigned int) regs->gpr[rd]);
+			val = (unsigned int) regs->gpr[rd];
+			op->val = ( val ? __builtin_clz(val) : 32 );
 			goto logical_done;
 #ifdef __powerpc64__
 		case 58:	/* cntlzd */
-			op->val = __builtin_clzl(regs->gpr[rd]);
+			val = regs->gpr[rd];
+			op->val = ( val ? __builtin_clzl(val) : 64 );
 			goto logical_done;
 #endif
 		case 28:	/* and */

arch/powerpc/mm/numa.c

@@ -1438,7 +1438,6 @@ out:
 
 int arch_update_cpu_topology(void)
 {
-	lockdep_assert_cpus_held();
 	return numa_update_cpu_topology(true);
 }
 

arch/powerpc/perf/imc-pmu.c

@@ -399,6 +399,20 @@ static void nest_imc_counters_release(struct perf_event *event)
 
 	/* Take the mutex lock for this node and then decrement the reference count */
 	mutex_lock(&ref->lock);
+	if (ref->refc == 0) {
+		/*
+		 * The scenario where this is true is, when perf session is
+		 * started, followed by offlining of all cpus in a given node.
+		 *
+		 * In the cpuhotplug offline path, ppc_nest_imc_cpu_offline()
+		 * function set the ref->count to zero, if the cpu which is
+		 * about to offline is the last cpu in a given node and make
+		 * an OPAL call to disable the engine in that node.
+		 *
+		 */
+		mutex_unlock(&ref->lock);
+		return;
+	}
 	ref->refc--;
 	if (ref->refc == 0) {
 		rc = opal_imc_counters_stop(OPAL_IMC_COUNTERS_NEST,
@@ -523,8 +537,8 @@ static int core_imc_mem_init(int cpu, int size)
 
 	/* We need only vbase for core counters */
 	mem_info->vbase = page_address(alloc_pages_node(phys_id,
-					  GFP_KERNEL | __GFP_ZERO | __GFP_THISNODE,
-					  get_order(size)));
+					  GFP_KERNEL | __GFP_ZERO | __GFP_THISNODE |
+					  __GFP_NOWARN, get_order(size)));
 	if (!mem_info->vbase)
 		return -ENOMEM;
 
@@ -646,6 +660,20 @@ static void core_imc_counters_release(struct perf_event *event)
 		return;
 
 	mutex_lock(&ref->lock);
+	if (ref->refc == 0) {
+		/*
+		 * The scenario where this is true is, when perf session is
+		 * started, followed by offlining of all cpus in a given core.
+		 *
+		 * In the cpuhotplug offline path, ppc_core_imc_cpu_offline()
+		 * function set the ref->count to zero, if the cpu which is
+		 * about to offline is the last cpu in a given core and make
+		 * an OPAL call to disable the engine in that core.
+		 *
+		 */
+		mutex_unlock(&ref->lock);
+		return;
+	}
 	ref->refc--;
 	if (ref->refc == 0) {
 		rc = opal_imc_counters_stop(OPAL_IMC_COUNTERS_CORE,
@@ -763,8 +791,8 @@ static int thread_imc_mem_alloc(int cpu_id, int size)
 		 * free the memory in cpu offline path.
 		 */
 		local_mem = page_address(alloc_pages_node(phys_id,
-				  GFP_KERNEL | __GFP_ZERO | __GFP_THISNODE,
-				  get_order(size)));
+				  GFP_KERNEL | __GFP_ZERO | __GFP_THISNODE |
+				  __GFP_NOWARN, get_order(size)));
 		if (!local_mem)
 			return -ENOMEM;
 
@@ -1148,7 +1176,8 @@ static void imc_common_cpuhp_mem_free(struct imc_pmu *pmu_ptr)
 	}
 
 	/* Only free the attr_groups which are dynamically allocated  */
-	kfree(pmu_ptr->attr_groups[IMC_EVENT_ATTR]->attrs);
+	if (pmu_ptr->attr_groups[IMC_EVENT_ATTR])
+		kfree(pmu_ptr->attr_groups[IMC_EVENT_ATTR]->attrs);
 	kfree(pmu_ptr->attr_groups[IMC_EVENT_ATTR]);
 	kfree(pmu_ptr);
 	return;

arch/s390/configs/zfcpdump_defconfig

@@ -27,6 +27,7 @@ CONFIG_NET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_BLK_DEV_RAM=y
 # CONFIG_BLK_DEV_XPRAM is not set
 # CONFIG_DCSSBLK is not set
 # CONFIG_DASD is not set
@@ -59,6 +60,7 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_PANIC_ON_OOPS=y
 # CONFIG_SCHED_DEBUG is not set

arch/s390/kernel/entry.S

@@ -521,12 +521,15 @@ ENTRY(pgm_check_handler)
 	tmhh	%r8,0x0001		# test problem state bit
 	jnz	2f			# -> fault in user space
 #if IS_ENABLED(CONFIG_KVM)
-	# cleanup critical section for sie64a
+	# cleanup critical section for program checks in sie64a
 	lgr	%r14,%r9
 	slg	%r14,BASED(.Lsie_critical_start)
 	clg	%r14,BASED(.Lsie_critical_length)
 	jhe	0f
-	brasl	%r14,.Lcleanup_sie
+	lg	%r14,__SF_EMPTY(%r15)		# get control block pointer
+	ni	__SIE_PROG0C+3(%r14),0xfe	# no longer in SIE
+	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
+	larl	%r9,sie_exit			# skip forward to sie_exit
 #endif
 0:	tmhh	%r8,0x4000		# PER bit set in old PSW ?
 	jnz	1f			# -> enabled, can't be a double fault

arch/s390/kernel/smp.c

@@ -293,7 +293,10 @@ static void pcpu_attach_task(struct pcpu *pcpu, struct task_struct *tsk)
 	lc->lpp = LPP_MAGIC;
 	lc->current_pid = tsk->pid;
 	lc->user_timer = tsk->thread.user_timer;
+	lc->guest_timer = tsk->thread.guest_timer;
 	lc->system_timer = tsk->thread.system_timer;
+	lc->hardirq_timer = tsk->thread.hardirq_timer;
+	lc->softirq_timer = tsk->thread.softirq_timer;
 	lc->steal_timer = 0;
 }
 

arch/sparc/Kconfig

@@ -44,7 +44,6 @@ config SPARC
 	select ARCH_HAS_SG_CHAIN
 	select CPU_NO_EFFICIENT_FFS
 	select LOCKDEP_SMALL if LOCKDEP
-	select ARCH_WANT_RELAX_ORDER
 
 config SPARC32
 	def_bool !64BIT

arch/x86/entry/entry_32.S

@@ -176,7 +176,7 @@
 /*
  * This is a sneaky trick to help the unwinder find pt_regs on the stack.  The
  * frame pointer is replaced with an encoded pointer to pt_regs.  The encoding
- * is just setting the LSB, which makes it an invalid stack address and is also
+ * is just clearing the MSB, which makes it an invalid stack address and is also
  * a signal to the unwinder that it's a pt_regs pointer in disguise.
  *
  * NOTE: This macro must be used *after* SAVE_ALL because it corrupts the
@@ -185,7 +185,7 @@
 .macro ENCODE_FRAME_POINTER
 #ifdef CONFIG_FRAME_POINTER
 	mov %esp, %ebp
-	orl $0x1, %ebp
+	andl $0x7fffffff, %ebp
 #endif
 .endm
 

arch/x86/entry/entry_64.S

@@ -808,7 +808,7 @@ apicinterrupt IRQ_WORK_VECTOR			irq_work_interrupt		smp_irq_work_interrupt
 
 .macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
 ENTRY(\sym)
-	UNWIND_HINT_IRET_REGS offset=8
+	UNWIND_HINT_IRET_REGS offset=\has_error_code*8
 
 	/* Sanity check */
 	.if \shift_ist != -1 && \paranoid == 0

arch/x86/events/intel/bts.c

@@ -546,9 +546,6 @@ static int bts_event_init(struct perf_event *event)
 	if (event->attr.type != bts_pmu.type)
 		return -ENOENT;
 
-	if (x86_add_exclusive(x86_lbr_exclusive_bts))
-		return -EBUSY;
-
 	/*
 	 * BTS leaks kernel addresses even when CPL0 tracing is
 	 * disabled, so disallow intel_bts driver for unprivileged
@@ -562,6 +559,9 @@ static int bts_event_init(struct perf_event *event)
 	    !capable(CAP_SYS_ADMIN))
 		return -EACCES;
 
+	if (x86_add_exclusive(x86_lbr_exclusive_bts))
+		return -EBUSY;
+
 	ret = x86_reserve_hardware();
 	if (ret) {
 		x86_del_exclusive(x86_lbr_exclusive_bts);

arch/x86/events/intel/uncore.c

@@ -822,7 +822,7 @@ static int __init uncore_type_init(struct intel_uncore_type *type, bool setid)
 		pmus[i].type	= type;
 		pmus[i].boxes	= kzalloc(size, GFP_KERNEL);
 		if (!pmus[i].boxes)
-			return -ENOMEM;
+			goto err;
 	}
 
 	type->pmus = pmus;
@@ -836,7 +836,7 @@ static int __init uncore_type_init(struct intel_uncore_type *type, bool setid)
 		attr_group = kzalloc(sizeof(struct attribute *) * (i + 1) +
 					sizeof(*attr_group), GFP_KERNEL);
 		if (!attr_group)
-			return -ENOMEM;
+			goto err;
 
 		attrs = (struct attribute **)(attr_group + 1);
 		attr_group->name = "events";
@@ -849,7 +849,15 @@ static int __init uncore_type_init(struct intel_uncore_type *type, bool setid)
 	}
 
 	type->pmu_group = &uncore_pmu_attr_group;
+
 	return 0;
+
+err:
+	for (i = 0; i < type->num_boxes; i++)
+		kfree(pmus[i].boxes);
+	kfree(pmus);
+
+	return -ENOMEM;
 }
 
 static int __init

arch/x86/hyperv/hv_init.c

@@ -85,6 +85,8 @@ EXPORT_SYMBOL_GPL(hyperv_cs);
 u32 *hv_vp_index;
 EXPORT_SYMBOL_GPL(hv_vp_index);
 
+u32 hv_max_vp_index;
+
 static int hv_cpu_init(unsigned int cpu)
 {
 	u64 msr_vp_index;
@@ -93,6 +95,9 @@ static int hv_cpu_init(unsigned int cpu)
 
 	hv_vp_index[smp_processor_id()] = msr_vp_index;
 
+	if (msr_vp_index > hv_max_vp_index)
+		hv_max_vp_index = msr_vp_index;
+
 	return 0;
 }
 

arch/x86/hyperv/mmu.c

@@ -36,9 +36,9 @@ struct hv_flush_pcpu_ex {
 /* Each gva in gva_list encodes up to 4096 pages to flush */
 #define HV_TLB_FLUSH_UNIT (4096 * PAGE_SIZE)
 
-static struct hv_flush_pcpu __percpu *pcpu_flush;
+static struct hv_flush_pcpu __percpu **pcpu_flush;
 
-static struct hv_flush_pcpu_ex __percpu *pcpu_flush_ex;
+static struct hv_flush_pcpu_ex __percpu **pcpu_flush_ex;
 
 /*
  * Fills in gva_list starting from offset. Returns the number of items added.
@@ -76,6 +76,18 @@ static inline int cpumask_to_vp_set(struct hv_flush_pcpu_ex *flush,
 {
 	int cpu, vcpu, vcpu_bank, vcpu_offset, nr_bank = 1;
 
+	/* valid_bank_mask can represent up to 64 banks */
+	if (hv_max_vp_index / 64 >= 64)
+		return 0;
+
+	/*
+	 * Clear all banks up to the maximum possible bank as hv_flush_pcpu_ex
+	 * structs are not cleared between calls, we risk flushing unneeded
+	 * vCPUs otherwise.
+	 */
+	for (vcpu_bank = 0; vcpu_bank <= hv_max_vp_index / 64; vcpu_bank++)
+		flush->hv_vp_set.bank_contents[vcpu_bank] = 0;
+
 	/*
 	 * Some banks may end up being empty but this is acceptable.
 	 */
@@ -83,11 +95,6 @@ static inline int cpumask_to_vp_set(struct hv_flush_pcpu_ex *flush,
 		vcpu = hv_cpu_number_to_vp_number(cpu);
 		vcpu_bank = vcpu / 64;
 		vcpu_offset = vcpu % 64;
-
-		/* valid_bank_mask can represent up to 64 banks */
-		if (vcpu_bank >= 64)
-			return 0;
-
 		__set_bit(vcpu_offset, (unsigned long *)
 			  &flush->hv_vp_set.bank_contents[vcpu_bank]);
 		if (vcpu_bank >= nr_bank)
@@ -102,6 +109,7 @@ static void hyperv_flush_tlb_others(const struct cpumask *cpus,
 				    const struct flush_tlb_info *info)
 {
 	int cpu, vcpu, gva_n, max_gvas;
+	struct hv_flush_pcpu **flush_pcpu;
 	struct hv_flush_pcpu *flush;
 	u64 status = U64_MAX;
 	unsigned long flags;
@@ -116,7 +124,17 @@ static void hyperv_flush_tlb_others(const struct cpumask *cpus,
 
 	local_irq_save(flags);
 
-	flush = this_cpu_ptr(pcpu_flush);
+	flush_pcpu = this_cpu_ptr(pcpu_flush);
+
+	if (unlikely(!*flush_pcpu))
+		*flush_pcpu = page_address(alloc_page(GFP_ATOMIC));
+
+	flush = *flush_pcpu;
+
+	if (unlikely(!flush)) {
+		local_irq_restore(flags);
+		goto do_native;
+	}
 
 	if (info->mm) {
 		flush->address_space = virt_to_phys(info->mm->pgd);
@@ -173,6 +191,7 @@ static void hyperv_flush_tlb_others_ex(const struct cpumask *cpus,
 				       const struct flush_tlb_info *info)
 {
 	int nr_bank = 0, max_gvas, gva_n;
+	struct hv_flush_pcpu_ex **flush_pcpu;
 	struct hv_flush_pcpu_ex *flush;
 	u64 status = U64_MAX;
 	unsigned long flags;
@@ -187,7 +206,17 @@ static void hyperv_flush_tlb_others_ex(const struct cpumask *cpus,
 
 	local_irq_save(flags);
 
-	flush = this_cpu_ptr(pcpu_flush_ex);
+	flush_pcpu = this_cpu_ptr(pcpu_flush_ex);
+
+	if (unlikely(!*flush_pcpu))
+		*flush_pcpu = page_address(alloc_page(GFP_ATOMIC));
+
+	flush = *flush_pcpu;
+
+	if (unlikely(!flush)) {
+		local_irq_restore(flags);
+		goto do_native;
+	}
 
 	if (info->mm) {
 		flush->address_space = virt_to_phys(info->mm->pgd);
@@ -222,18 +251,18 @@ static void hyperv_flush_tlb_others_ex(const struct cpumask *cpus,
 		flush->flags |= HV_FLUSH_NON_GLOBAL_MAPPINGS_ONLY;
 		status = hv_do_rep_hypercall(
 			HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX,
-			0, nr_bank + 2, flush, NULL);
+			0, nr_bank, flush, NULL);
 	} else if (info->end &&
 		   ((info->end - info->start)/HV_TLB_FLUSH_UNIT) > max_gvas) {
 		status = hv_do_rep_hypercall(
 			HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX,
-			0, nr_bank + 2, flush, NULL);
+			0, nr_bank, flush, NULL);
 	} else {
 		gva_n = fill_gva_list(flush->gva_list, nr_bank,
 				      info->start, info->end);
 		status = hv_do_rep_hypercall(
 			HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX,
-			gva_n, nr_bank + 2, flush, NULL);
+			gva_n, nr_bank, flush, NULL);
 	}
 
 	local_irq_restore(flags);
@@ -266,7 +295,7 @@ void hyper_alloc_mmu(void)
 		return;
 
 	if (!(ms_hyperv.hints & HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED))
-		pcpu_flush = __alloc_percpu(PAGE_SIZE, PAGE_SIZE);
+		pcpu_flush = alloc_percpu(struct hv_flush_pcpu *);
 	else
-		pcpu_flush_ex = __alloc_percpu(PAGE_SIZE, PAGE_SIZE);
+		pcpu_flush_ex = alloc_percpu(struct hv_flush_pcpu_ex *);
 }

arch/x86/include/asm/alternative-asm.h

@@ -62,8 +62,10 @@
 #define new_len2		145f-144f
 
 /*
- * max without conditionals. Idea adapted from:
+ * gas compatible max based on the idea from:
  * http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
+ *
+ * The additional "-" is needed because gas uses a "true" value of -1.
  */
 #define alt_max_short(a, b)	((a) ^ (((a) ^ (b)) & -(-((a) < (b)))))
 

arch/x86/include/asm/alternative.h

@@ -103,12 +103,12 @@ static inline int alternatives_text_reserved(void *start, void *end)
 	alt_end_marker ":\n"
 
 /*
- * max without conditionals. Idea adapted from:
+ * gas compatible max based on the idea from:
  * http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
  *
- * The additional "-" is needed because gas works with s32s.
+ * The additional "-" is needed because gas uses a "true" value of -1.
  */
-#define alt_max_short(a, b)	"((" a ") ^ (((" a ") ^ (" b ")) & -(-((" a ") - (" b ")))))"
+#define alt_max_short(a, b)	"((" a ") ^ (((" a ") ^ (" b ")) & -(-((" a ") < (" b ")))))"
 
 /*
  * Pad the second replacement alternative with additional NOPs if it is

arch/x86/include/asm/mce.h

@@ -187,7 +187,6 @@ struct mca_msr_regs {
 
 extern struct mce_vendor_flags mce_flags;
 
-extern struct mca_config mca_cfg;
 extern struct mca_msr_regs msr_ops;
 
 enum mce_notifier_prios {

arch/x86/include/asm/mmu_context.h

@@ -126,13 +126,7 @@ static inline void switch_ldt(struct mm_struct *prev, struct mm_struct *next)
 	DEBUG_LOCKS_WARN_ON(preemptible());
 }
 
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-	int cpu = smp_processor_id();
-
-	if (cpumask_test_cpu(cpu, mm_cpumask(mm)))
-		cpumask_clear_cpu(cpu, mm_cpumask(mm));
-}
+void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk);
 
 static inline int init_new_context(struct task_struct *tsk,
 				   struct mm_struct *mm)

arch/x86/include/asm/mshyperv.h

@@ -289,6 +289,7 @@ static inline u64 hv_do_rep_hypercall(u16 code, u16 rep_count, u16 varhead_size,
  * to this information.
  */
 extern u32 *hv_vp_index;
+extern u32 hv_max_vp_index;
 
 /**
  * hv_cpu_number_to_vp_number() - Map CPU to VP.

arch/x86/include/asm/tlbflush.h

@@ -82,6 +82,22 @@ static inline u64 inc_mm_tlb_gen(struct mm_struct *mm)
 #define __flush_tlb_single(addr) __native_flush_tlb_single(addr)
 #endif
 
+static inline bool tlb_defer_switch_to_init_mm(void)
+{
+	/*
+	 * If we have PCID, then switching to init_mm is reasonably
+	 * fast.  If we don't have PCID, then switching to init_mm is
+	 * quite slow, so we try to defer it in the hopes that we can
+	 * avoid it entirely.  The latter approach runs the risk of
+	 * receiving otherwise unnecessary IPIs.
+	 *
+	 * This choice is just a heuristic.  The tlb code can handle this
+	 * function returning true or false regardless of whether we have
+	 * PCID.
+	 */
+	return !static_cpu_has(X86_FEATURE_PCID);
+}
+
 /*
  * 6 because 6 should be plenty and struct tlb_state will fit in
  * two cache lines.
@@ -104,6 +120,23 @@ struct tlb_state {
 	u16 loaded_mm_asid;
 	u16 next_asid;
 
+	/*
+	 * We can be in one of several states:
+	 *
+	 *  - Actively using an mm.  Our CPU's bit will be set in
+	 *    mm_cpumask(loaded_mm) and is_lazy == false;
+	 *
+	 *  - Not using a real mm.  loaded_mm == &init_mm.  Our CPU's bit
+	 *    will not be set in mm_cpumask(&init_mm) and is_lazy == false.
+	 *
+	 *  - Lazily using a real mm.  loaded_mm != &init_mm, our bit
+	 *    is set in mm_cpumask(loaded_mm), but is_lazy == true.
+	 *    We're heuristically guessing that the CR3 load we
+	 *    skipped more than makes up for the overhead added by
+	 *    lazy mode.
+	 */
+	bool is_lazy;
+
 	/*
 	 * Access to this CR4 shadow and to H/W CR4 is protected by
 	 * disabling interrupts when modifying either one.

arch/x86/kernel/amd_nb.c

@@ -27,6 +27,8 @@ static const struct pci_device_id amd_root_ids[] = {
 	{}
 };
 
+#define PCI_DEVICE_ID_AMD_CNB17H_F4     0x1704
+
 const struct pci_device_id amd_nb_misc_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
@@ -37,6 +39,7 @@ const struct pci_device_id amd_nb_misc_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{}
 };
 EXPORT_SYMBOL_GPL(amd_nb_misc_ids);
@@ -48,6 +51,7 @@ static const struct pci_device_id amd_nb_link_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_DF_F4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F4) },
 	{}
 };
 
@@ -402,11 +406,48 @@ void amd_flush_garts(void)
 }
 EXPORT_SYMBOL_GPL(amd_flush_garts);
 
+static void __fix_erratum_688(void *info)
+{
+#define MSR_AMD64_IC_CFG 0xC0011021
+
+	msr_set_bit(MSR_AMD64_IC_CFG, 3);
+	msr_set_bit(MSR_AMD64_IC_CFG, 14);
+}
+
+/* Apply erratum 688 fix so machines without a BIOS fix work. */
+static __init void fix_erratum_688(void)
+{
+	struct pci_dev *F4;
+	u32 val;
+
+	if (boot_cpu_data.x86 != 0x14)
+		return;
+
+	if (!amd_northbridges.num)
+		return;
+
+	F4 = node_to_amd_nb(0)->link;
+	if (!F4)
+		return;
+
+	if (pci_read_config_dword(F4, 0x164, &val))
+		return;
+
+	if (val & BIT(2))
+		return;
+
+	on_each_cpu(__fix_erratum_688, NULL, 0);
+
+	pr_info("x86/cpu/AMD: CPU erratum 688 worked around\n");
+}
+
 static __init int init_amd_nbs(void)
 {
 	amd_cache_northbridges();
 	amd_cache_gart();
 
+	fix_erratum_688();
+
 	return 0;
 }
 

arch/x86/kernel/apic/apic.c

@@ -573,11 +573,21 @@ static u32 bdx_deadline_rev(void)
 	return ~0U;
 }
 
+static u32 skx_deadline_rev(void)
+{
+	switch (boot_cpu_data.x86_mask) {
+	case 0x03: return 0x01000136;
+	case 0x04: return 0x02000014;
+	}
+
+	return ~0U;
+}
+
 static const struct x86_cpu_id deadline_match[] = {
 	DEADLINE_MODEL_MATCH_FUNC( INTEL_FAM6_HASWELL_X,	hsx_deadline_rev),
 	DEADLINE_MODEL_MATCH_REV ( INTEL_FAM6_BROADWELL_X,	0x0b000020),
 	DEADLINE_MODEL_MATCH_FUNC( INTEL_FAM6_BROADWELL_XEON_D,	bdx_deadline_rev),
-	DEADLINE_MODEL_MATCH_REV ( INTEL_FAM6_SKYLAKE_X,	0x02000014),
+	DEADLINE_MODEL_MATCH_FUNC( INTEL_FAM6_SKYLAKE_X,	skx_deadline_rev),
 
 	DEADLINE_MODEL_MATCH_REV ( INTEL_FAM6_HASWELL_CORE,	0x22),
 	DEADLINE_MODEL_MATCH_REV ( INTEL_FAM6_HASWELL_ULT,	0x20),
@@ -600,7 +610,8 @@ static void apic_check_deadline_errata(void)
 	const struct x86_cpu_id *m;
 	u32 rev;
 
-	if (!boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER))
+	if (!boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER) ||
+	    boot_cpu_has(X86_FEATURE_HYPERVISOR))
 		return;
 
 	m = x86_match_cpu(deadline_match);

arch/x86/kernel/cpu/intel_cacheinfo.c

@@ -831,7 +831,6 @@ static int __cache_amd_cpumap_setup(unsigned int cpu, int index,
 	} else if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
 		unsigned int apicid, nshared, first, last;
 
-		this_leaf = this_cpu_ci->info_list + index;
 		nshared = base->eax.split.num_threads_sharing + 1;
 		apicid = cpu_data(cpu).apicid;
 		first = apicid - (apicid % nshared);

arch/x86/kernel/cpu/mcheck/mce-internal.h

@@ -1,3 +1,6 @@
+#ifndef __X86_MCE_INTERNAL_H__
+#define __X86_MCE_INTERNAL_H__
+
 #include <linux/device.h>
 #include <asm/mce.h>
 
@@ -108,3 +111,7 @@ static inline void mce_work_trigger(void)	{ }
 static inline void mce_register_injector_chain(struct notifier_block *nb)	{ }
 static inline void mce_unregister_injector_chain(struct notifier_block *nb)	{ }
 #endif
+
+extern struct mca_config mca_cfg;
+
+#endif /* __X86_MCE_INTERNAL_H__ */

arch/x86/kernel/cpu/mcheck/mce_amd.c

@@ -28,6 +28,8 @@
 #include <asm/msr.h>
 #include <asm/trace/irq_vectors.h>
 
+#include "mce-internal.h"
+
 #define NR_BLOCKS         5
 #define THRESHOLD_MAX     0xFFF
 #define INT_TYPE_APIC     0x00020000