Merge tag 'zynq-dt-for-4.10' of https://github.com/Xilinx/linux-xlnx into next/dt

arm: Xilinx Zynq dt patches for v4.10

- Remove skeleton.dtsi
- Fix DTC warnings
- Coding style changes
- Microzed support

* tag 'zynq-dt-for-4.10' of https://github.com/Xilinx/linux-xlnx:
  arm: dts: zynq: Add MicroZed board support
  ARM: zynq: Fix pmu register description coding style
  ARM: zynq: Fix W=1 dtc 1.4 warnings
  ARM: zynq: Remove skeleton.dtsi

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -923,6 +923,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
 	wm8750-apc8750.dtb \
 	wm8850-w70v2.dtb
 dtb-$(CONFIG_ARCH_ZYNQ) += \
+	zynq-microzed.dtb \
 	zynq-parallella.dtb \
 	zynq-zc702.dtb \
 	zynq-zc706.dtb \

arch/arm/boot/dts/zynq-7000.dtsi

@@ -10,9 +10,10 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-/include/ "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "xlnx,zynq-7000";
 
 	cpus {
@@ -41,14 +42,15 @@
 		};
 	};
 
-	pmu {
+	pmu@f8891000 {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <0 5 4>, <0 6 4>;
 		interrupt-parent = <&intc>;
-		reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
+		reg = <0xf8891000 0x1000>,
+		      <0xf8893000 0x1000>;
 	};
 
-	regulator_vccpint: fixedregulator@0 {
+	regulator_vccpint: fixedregulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VCCPINT";
 		regulator-min-microvolt = <1000000>;

arch/arm/boot/dts/zynq-microzed.dts

@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq MicroZED Development Board";
+	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&pinctrl0 {
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};

arch/arm/boot/dts/zynq-parallella.dts

@@ -28,7 +28,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};

arch/arm/boot/dts/zynq-zc702.dts

@@ -24,7 +24,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};

arch/arm/boot/dts/zynq-zc706.dts

@@ -24,7 +24,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};

arch/arm/boot/dts/zynq-zed.dts

@@ -23,7 +23,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x20000000>;
 	};

arch/arm/boot/dts/zynq-zybo.dts

@@ -23,7 +23,7 @@
 		serial0 = &uart1;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x20000000>;
 	};