powerpc/mm: Move hash specific pte bits to be top bits of RPN

We don't support the full 57 bits of physical address and hence can
overload the top bits of RPN as hash specific pte bits.

Add a BUILD_BUG_ON() to enforce the relationship between H_PAGE_F_SECOND
and H_PAGE_F_GIX.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Move the BUILD_BUG_ON() into hash_utils_64.c and comment it]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/include/asm/book3s/64/hash.h

@@ -6,20 +6,13 @@
  * Common bits between 4K and 64K pages in a linux-style PTE.
  * Additional bits may be defined in pgtable-hash64-*.h
  *
- * Note: We only support user read/write permissions. Supervisor always
- * have full read/write to pages above PAGE_OFFSET (pages below that
- * always use the user access permissions).
- *
- * We could create separate kernel read-only if we used the 3 PP bits
- * combinations that newer processors provide but we currently don't.
  */
-#define H_PAGE_BUSY		_RPAGE_SW1 /* software: PTE & hash are busy */
 #define H_PTE_NONE_MASK		_PAGE_HPTEFLAGS
-#define H_PAGE_F_GIX_SHIFT	57
-/* (7ul << 57) HPTE index within HPTEG */
-#define H_PAGE_F_GIX		(_RPAGE_RSV2 | _RPAGE_RSV3 | _RPAGE_RSV4)
-#define H_PAGE_F_SECOND		_RPAGE_RSV1	/* HPTE is in 2ndary HPTEG */
-#define H_PAGE_HASHPTE		_RPAGE_SW0	/* PTE has associated HPTE */
+#define H_PAGE_F_GIX_SHIFT	56
+#define H_PAGE_BUSY		_RPAGE_RSV1 /* software: PTE & hash are busy */
+#define H_PAGE_F_SECOND		_RPAGE_RSV2	/* HPTE is in 2ndary HPTEG */
+#define H_PAGE_F_GIX		(_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
+#define H_PAGE_HASHPTE		_RPAGE_RPN43	/* PTE has associated HPTE */
 
 #ifdef CONFIG_PPC_64K_PAGES
 #include <asm/book3s/64/hash-64k.h>

arch/powerpc/include/asm/book3s/64/pgtable.h

@@ -36,8 +36,21 @@
 #define _RPAGE_RSV2		0x0800000000000000UL
 #define _RPAGE_RSV3		0x0400000000000000UL
 #define _RPAGE_RSV4		0x0200000000000000UL
+
+#define _PAGE_PTE		0x4000000000000000UL	/* distinguishes PTEs from pointers */
+#define _PAGE_PRESENT		0x8000000000000000UL	/* pte contains a translation */
+
+/*
+ * Top and bottom bits of RPN which can be used by hash
+ * translation mode, because we expect them to be zero
+ * otherwise.
+ */
 #define _RPAGE_RPN0		0x01000
 #define _RPAGE_RPN1		0x02000
+#define _RPAGE_RPN44		0x0100000000000000UL
+#define _RPAGE_RPN43		0x0080000000000000UL
+#define _RPAGE_RPN42		0x0040000000000000UL
+#define _RPAGE_RPN41		0x0020000000000000UL
 
 /* Max physical address bit as per radix table */
 #define _RPAGE_PA_MAX		57
@@ -65,9 +78,6 @@
 
 #define _PAGE_SOFT_DIRTY	_RPAGE_SW3 /* software: software dirty tracking */
 #define _PAGE_SPECIAL		_RPAGE_SW2 /* software: special page */
-
-#define _PAGE_PTE		0x4000000000000000UL	/* distinguishes PTEs from pointers */
-#define _PAGE_PRESENT		0x8000000000000000UL	/* pte contains a translation */
 /*
  * Drivers request for cache inhibited pte mapping using _PAGE_NO_CACHE
  * Instead of fixing all of them, add an alternate define which

arch/powerpc/mm/hash_utils_64.c

@@ -981,6 +981,19 @@ void __init hash__early_init_devtree(void)
 
 void __init hash__early_init_mmu(void)
 {
+	/*
+	 * We have code in __hash_page_64K() and elsewhere, which assumes it can
+	 * do the following:
+	 *   new_pte |= (slot << H_PAGE_F_GIX_SHIFT) & (H_PAGE_F_SECOND | H_PAGE_F_GIX);
+	 *
+	 * Where the slot number is between 0-15, and values of 8-15 indicate
+	 * the secondary bucket. For that code to work H_PAGE_F_SECOND and
+	 * H_PAGE_F_GIX must occupy four contiguous bits in the PTE, and
+	 * H_PAGE_F_SECOND must be placed above H_PAGE_F_GIX. Assert that here
+	 * with a BUILD_BUG_ON().
+	 */
+	BUILD_BUG_ON(H_PAGE_F_SECOND != (1ul  << (H_PAGE_F_GIX_SHIFT + 3)));
+
 	htab_init_page_sizes();
 
 	/*