usb: host: xhci: introduce xhci_td_cleanup()

By extracting xhci_td_cleanup() from finish_td(), code before clearer
and easier to follow.

There are no functional changes with this patch. It's merely a cleanup.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/xhci-ring.c

@@ -1822,6 +1822,55 @@ int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
 	return 0;
 }
 
+static int xhci_td_cleanup(struct xhci_hcd *xhci, struct xhci_td *td,
+		struct xhci_ring *ep_ring, int *status)
+{
+	struct urb_priv	*urb_priv;
+	struct urb *urb = NULL;
+
+	/* Clean up the endpoint's TD list */
+	urb = td->urb;
+	urb_priv = urb->hcpriv;
+
+	/* if a bounce buffer was used to align this td then unmap it */
+	if (td->bounce_seg)
+		xhci_unmap_td_bounce_buffer(xhci, ep_ring, td);
+
+	/* Do one last check of the actual transfer length.
+	 * If the host controller said we transferred more data than the buffer
+	 * length, urb->actual_length will be a very big number (since it's
+	 * unsigned).  Play it safe and say we didn't transfer anything.
+	 */
+	if (urb->actual_length > urb->transfer_buffer_length) {
+		xhci_warn(xhci, "URB req %u and actual %u transfer length mismatch\n",
+			  urb->transfer_buffer_length, urb->actual_length);
+		urb->actual_length = 0;
+		*status = 0;
+	}
+	list_del_init(&td->td_list);
+	/* Was this TD slated to be cancelled but completed anyway? */
+	if (!list_empty(&td->cancelled_td_list))
+		list_del_init(&td->cancelled_td_list);
+
+	inc_td_cnt(urb);
+	/* Giveback the urb when all the tds are completed */
+	if (last_td_in_urb(td)) {
+		if ((urb->actual_length != urb->transfer_buffer_length &&
+		     (urb->transfer_flags & URB_SHORT_NOT_OK)) ||
+		    (*status != 0 && !usb_endpoint_xfer_isoc(&urb->ep->desc)))
+			xhci_dbg(xhci, "Giveback URB %p, len = %d, expected = %d, status = %d\n",
+				 urb, urb->actual_length,
+				 urb->transfer_buffer_length, *status);
+
+		/* set isoc urb status to 0 just as EHCI, UHCI, and OHCI */
+		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+			*status = 0;
+		xhci_giveback_urb_in_irq(xhci, td, *status);
+	}
+
+	return 0;
+}
+
 static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	union xhci_trb *ep_trb, struct xhci_transfer_event *event,
 	struct xhci_virt_ep *ep, int *status, bool skip)
@@ -1829,8 +1878,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	struct xhci_virt_device *xdev;
 	struct xhci_ep_ctx *ep_ctx;
 	struct xhci_ring *ep_ring;
-	struct urb_priv	*urb_priv;
-	struct urb *urb = NULL;
 	unsigned int slot_id;
 	u32 trb_comp_code;
 	int ep_index;
@@ -1873,46 +1920,7 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	}
 
 td_cleanup:
-	/* Clean up the endpoint's TD list */
-	urb = td->urb;
-	urb_priv = urb->hcpriv;
-
-	/* if a bounce buffer was used to align this td then unmap it */
-	if (td->bounce_seg)
-		xhci_unmap_td_bounce_buffer(xhci, ep_ring, td);
-
-	/* Do one last check of the actual transfer length.
-	 * If the host controller said we transferred more data than the buffer
-	 * length, urb->actual_length will be a very big number (since it's
-	 * unsigned).  Play it safe and say we didn't transfer anything.
-	 */
-	if (urb->actual_length > urb->transfer_buffer_length) {
-		xhci_warn(xhci, "URB req %u and actual %u transfer length mismatch\n",
-			  urb->transfer_buffer_length, urb->actual_length);
-		urb->actual_length = 0;
-		*status = 0;
-	}
-	list_del_init(&td->td_list);
-	/* Was this TD slated to be cancelled but completed anyway? */
-	if (!list_empty(&td->cancelled_td_list))
-		list_del_init(&td->cancelled_td_list);
-
-	inc_td_cnt(urb);
-	/* Giveback the urb when all the tds are completed */
-	if (last_td_in_urb(td)) {
-		if ((urb->actual_length != urb->transfer_buffer_length &&
-		     (urb->transfer_flags & URB_SHORT_NOT_OK)) ||
-		    (*status != 0 && !usb_endpoint_xfer_isoc(&urb->ep->desc)))
-			xhci_dbg(xhci, "Giveback URB %p, len = %d, expected = %d, status = %d\n",
-				 urb, urb->actual_length,
-				 urb->transfer_buffer_length, *status);
-
-		/* set isoc urb status to 0 just as EHCI, UHCI, and OHCI */
-		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
-			*status = 0;
-		xhci_giveback_urb_in_irq(xhci, td, *status);
-	}
-	return 0;
+	return xhci_td_cleanup(xhci, td, ep_ring, status);
 }
 
 /* sum trb lengths from ring dequeue up to stop_trb, _excluding_ stop_trb */