drm/i915/guc: Move defines with size of GuC logs to intel_guc_log.h

At this moment, we have defined GuC logs sizes in intel_guc_fwif.h, but
as these values are related directly to the GuC logs, and not to API of
GuC parameters, we should move these defines to intel_guc_log.h.

v2:
- change buffers size to more friendly (Michał Wajdeczko)
- remove GUC_LOG_SIZE define (Michał Wajdeczko)
v3:
- use SZ_* macros to define buffers sizes (Michał Wajdeczko)

Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180605151330.9954-1-piotr.piorkowski@intel.com

drivers/gpu/drm/i915/intel_guc.c

@@ -263,13 +263,31 @@ static u32 guc_ctl_log_params_flags(struct intel_guc *guc)
 	u32 offset = intel_guc_ggtt_offset(guc, guc->log.vma) >> PAGE_SHIFT;
 	u32 flags;
 
-	/* each allocated unit is a page */
-	flags = GUC_LOG_VALID | GUC_LOG_NOTIFY_ON_HALF_FULL |
-		(GUC_LOG_CRASH_PAGES << GUC_LOG_CRASH_SHIFT) |
-		(GUC_LOG_DPC_PAGES << GUC_LOG_DPC_SHIFT) |
-		(GUC_LOG_ISR_PAGES << GUC_LOG_ISR_SHIFT) |
+	#define UNIT SZ_4K
+
+	BUILD_BUG_ON(!CRASH_BUFFER_SIZE);
+	BUILD_BUG_ON(!IS_ALIGNED(CRASH_BUFFER_SIZE, UNIT));
+	BUILD_BUG_ON(!DPC_BUFFER_SIZE);
+	BUILD_BUG_ON(!IS_ALIGNED(DPC_BUFFER_SIZE, UNIT));
+	BUILD_BUG_ON(!ISR_BUFFER_SIZE);
+	BUILD_BUG_ON(!IS_ALIGNED(ISR_BUFFER_SIZE, UNIT));
+
+	BUILD_BUG_ON((CRASH_BUFFER_SIZE / UNIT - 1) >
+			(GUC_LOG_CRASH_MASK >> GUC_LOG_CRASH_SHIFT));
+	BUILD_BUG_ON((DPC_BUFFER_SIZE / UNIT - 1) >
+			(GUC_LOG_DPC_MASK >> GUC_LOG_DPC_SHIFT));
+	BUILD_BUG_ON((ISR_BUFFER_SIZE / UNIT - 1) >
+			(GUC_LOG_ISR_MASK >> GUC_LOG_ISR_SHIFT));
+
+	flags = GUC_LOG_VALID |
+		GUC_LOG_NOTIFY_ON_HALF_FULL |
+		((CRASH_BUFFER_SIZE / UNIT - 1) << GUC_LOG_CRASH_SHIFT) |
+		((DPC_BUFFER_SIZE / UNIT - 1) << GUC_LOG_DPC_SHIFT) |
+		((ISR_BUFFER_SIZE / UNIT - 1) << GUC_LOG_ISR_SHIFT) |
 		(offset << GUC_LOG_BUF_ADDR_SHIFT);
 
+	#undef UNIT
+
 	return flags;
 }
 

drivers/gpu/drm/i915/intel_guc_fwif.h

@@ -84,12 +84,12 @@
 #define   GUC_LOG_VALID			(1 << 0)
 #define   GUC_LOG_NOTIFY_ON_HALF_FULL	(1 << 1)
 #define   GUC_LOG_ALLOC_IN_MEGABYTE	(1 << 3)
-#define   GUC_LOG_CRASH_PAGES		1
 #define   GUC_LOG_CRASH_SHIFT		4
-#define   GUC_LOG_DPC_PAGES		7
+#define   GUC_LOG_CRASH_MASK		(0x1 << GUC_LOG_CRASH_SHIFT)
 #define   GUC_LOG_DPC_SHIFT		6
-#define   GUC_LOG_ISR_PAGES		7
+#define   GUC_LOG_DPC_MASK	        (0x7 << GUC_LOG_DPC_SHIFT)
 #define   GUC_LOG_ISR_SHIFT		9
+#define   GUC_LOG_ISR_MASK	        (0x7 << GUC_LOG_ISR_SHIFT)
 #define   GUC_LOG_BUF_ADDR_SHIFT	12
 
 #define GUC_CTL_PAGE_FAULT_CONTROL	5
@@ -532,20 +532,6 @@ enum guc_log_buffer_type {
 };
 
 /**
- * DOC: GuC Log buffer Layout
- *
- * Page0  +-------------------------------+
- *        |   ISR state header (32 bytes) |
- *        |      DPC state header         |
- *        |   Crash dump state header     |
- * Page1  +-------------------------------+
- *        |           ISR logs            |
- * Page9  +-------------------------------+
- *        |           DPC logs            |
- * Page17 +-------------------------------+
- *        |         Crash Dump logs       |
- *        +-------------------------------+
- *
  * Below state structure is used for coordination of retrieval of GuC firmware
  * logs. Separate state is maintained for each log buffer type.
  * read_ptr points to the location where i915 read last in log buffer and

drivers/gpu/drm/i915/intel_guc_log.c

@@ -215,11 +215,11 @@ static unsigned int guc_get_log_buffer_size(enum guc_log_buffer_type type)
 {
 	switch (type) {
 	case GUC_ISR_LOG_BUFFER:
-		return (GUC_LOG_ISR_PAGES + 1) * PAGE_SIZE;
+		return ISR_BUFFER_SIZE;
 	case GUC_DPC_LOG_BUFFER:
-		return (GUC_LOG_DPC_PAGES + 1) * PAGE_SIZE;
+		return DPC_BUFFER_SIZE;
 	case GUC_CRASH_DUMP_LOG_BUFFER:
-		return (GUC_LOG_CRASH_PAGES + 1) * PAGE_SIZE;
+		return CRASH_BUFFER_SIZE;
 	default:
 		MISSING_CASE(type);
 	}
@@ -397,7 +397,7 @@ static int guc_log_relay_create(struct intel_guc_log *log)
 	lockdep_assert_held(&log->relay.lock);
 
 	 /* Keep the size of sub buffers same as shared log buffer */
-	subbuf_size = GUC_LOG_SIZE;
+	subbuf_size = log->vma->size;
 
 	/*
 	 * Store up to 8 snapshots, which is large enough to buffer sufficient
@@ -452,11 +452,34 @@ int intel_guc_log_create(struct intel_guc_log *log)
 {
 	struct intel_guc *guc = log_to_guc(log);
 	struct i915_vma *vma;
+	u32 guc_log_size;
 	int ret;
 
 	GEM_BUG_ON(log->vma);
 
-	vma = intel_guc_allocate_vma(guc, GUC_LOG_SIZE);
+	/*
+	 *  GuC Log buffer Layout
+	 *
+	 *  +===============================+ 00B
+	 *  |    Crash dump state header    |
+	 *  +-------------------------------+ 32B
+	 *  |       DPC state header        |
+	 *  +-------------------------------+ 64B
+	 *  |       ISR state header        |
+	 *  +-------------------------------+ 96B
+	 *  |                               |
+	 *  +===============================+ PAGE_SIZE (4KB)
+	 *  |        Crash Dump logs        |
+	 *  +===============================+ + CRASH_SIZE
+	 *  |           DPC logs            |
+	 *  +===============================+ + DPC_SIZE
+	 *  |           ISR logs            |
+	 *  +===============================+ + ISR_SIZE
+	 */
+	guc_log_size = PAGE_SIZE + CRASH_BUFFER_SIZE + DPC_BUFFER_SIZE +
+			ISR_BUFFER_SIZE;
+
+	vma = intel_guc_allocate_vma(guc, guc_log_size);
 	if (IS_ERR(vma)) {
 		ret = PTR_ERR(vma);
 		goto err;

drivers/gpu/drm/i915/intel_guc_log.h

@@ -34,12 +34,9 @@
 
 struct intel_guc;
 
-/*
- * The first page is to save log buffer state. Allocate one
- * extra page for others in case for overlap
- */
-#define GUC_LOG_SIZE	((1 + GUC_LOG_DPC_PAGES + 1 + GUC_LOG_ISR_PAGES + \
-			  1 + GUC_LOG_CRASH_PAGES + 1) << PAGE_SHIFT)
+#define CRASH_BUFFER_SIZE	SZ_8K
+#define DPC_BUFFER_SIZE		SZ_32K
+#define ISR_BUFFER_SIZE		SZ_32K
 
 /*
  * While we're using plain log level in i915, GuC controls are much more...