Merge branch 'pci/misc'

  - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas)

  - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr()
    (Shawn Lin)

  - report quirk timings with dev_info (Bjorn Helgaas)

  - report quirks that take longer than 10ms (Bjorn Helgaas)

  - add and use Altera Vendor ID (Johannes Thumshirn)

  - tidy Makefiles and comments (Bjorn Helgaas)

* pci/misc:
  PCI: Always define the of_node helpers
  PCI: Tidy comments
  PCI: Tidy Makefiles
  mcb: Add Altera PCI ID to mcb-pci
  PCI: Add Altera vendor ID
  PCI: Report quirks that take more than 10ms
  PCI: Report quirk timings with pci_info() instead of pr_debug()
  PCI: Fix NULL pointer dereference in of_pci_bus_find_domain_nr()
  rapidio/tsi721: use PCI_EXP_DEVCTL2_COMP_TIMEOUT macro

drivers/char/xillybus/xillybus_pcie.c

@@ -24,7 +24,6 @@ MODULE_LICENSE("GPL v2");
 
 #define PCI_DEVICE_ID_XILLYBUS		0xebeb
 
-#define PCI_VENDOR_ID_ALTERA		0x1172
 #define PCI_VENDOR_ID_ACTEL		0x11aa
 #define PCI_VENDOR_ID_LATTICE		0x1204
 

drivers/fpga/altera-cvp.c

@@ -384,8 +384,6 @@ static int altera_cvp_probe(struct pci_dev *pdev,
 			    const struct pci_device_id *dev_id);
 static void altera_cvp_remove(struct pci_dev *pdev);
 
-#define PCI_VENDOR_ID_ALTERA	0x1172
-
 static struct pci_device_id altera_cvp_id_tbl[] = {
 	{ PCI_VDEVICE(ALTERA, PCI_ANY_ID) },
 	{ }

drivers/mcb/mcb-pci.c

@@ -117,6 +117,7 @@ static void mcb_pci_remove(struct pci_dev *pdev)
 
 static const struct pci_device_id mcb_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MEN, PCI_DEVICE_ID_MEN_CHAMELEON) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ALTERA, PCI_DEVICE_ID_MEN_CHAMELEON) },
 	{ 0 },
 };
 MODULE_DEVICE_TABLE(pci, mcb_pci_tbl);

drivers/pci/Makefile

@@ -1,61 +1,40 @@
 # SPDX-License-Identifier: GPL-2.0
 #
 # Makefile for the PCI bus specific drivers.
-#
 
-obj-$(CONFIG_PCI)	+= access.o bus.o probe.o host-bridge.o remove.o pci.o \
-			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
-			irq.o vpd.o setup-bus.o vc.o mmap.o setup-irq.o
+obj-$(CONFIG_PCI)		+= access.o bus.o probe.o host-bridge.o \
+				   remove.o pci.o pci-driver.o search.o \
+				   pci-sysfs.o rom.o setup-res.o irq.o vpd.o \
+				   setup-bus.o vc.o mmap.o setup-irq.o
 
 ifdef CONFIG_PCI
-obj-$(CONFIG_PROC_FS) += proc.o
-obj-$(CONFIG_SYSFS) += slot.o
-obj-$(CONFIG_OF) += of.o
+obj-$(CONFIG_PROC_FS)		+= proc.o
+obj-$(CONFIG_SYSFS)		+= slot.o
+obj-$(CONFIG_OF)		+= of.o
 endif
 
-obj-$(CONFIG_PCI_QUIRKS) += quirks.o
-
-# Build PCI Express stuff if needed
-obj-$(CONFIG_PCIEPORTBUS) += pcie/
-
-# Build the PCI Hotplug drivers if we were asked to
-obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
-
-# Build the PCI MSI interrupt support
-obj-$(CONFIG_PCI_MSI) += msi.o
-
-obj-$(CONFIG_PCI_ATS) += ats.o
-obj-$(CONFIG_PCI_IOV) += iov.o
-
-#
-# ACPI Related PCI FW Functions
-# ACPI _DSM provided firmware instance and string name
-#
-obj-$(CONFIG_ACPI)    += pci-acpi.o
-
-# SMBIOS provided firmware instance and labels
-obj-$(CONFIG_PCI_LABEL) += pci-label.o
-
-# Intel MID platform PM support
-obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o
-
-obj-$(CONFIG_PCI_SYSCALL) += syscall.o
-
-obj-$(CONFIG_PCI_STUB) += pci-stub.o
-
-obj-$(CONFIG_PCI_ECAM) += ecam.o
-
+obj-$(CONFIG_PCI_QUIRKS)	+= quirks.o
+obj-$(CONFIG_PCIEPORTBUS)	+= pcie/
+obj-$(CONFIG_HOTPLUG_PCI)	+= hotplug/
+obj-$(CONFIG_PCI_MSI)		+= msi.o
+obj-$(CONFIG_PCI_ATS)		+= ats.o
+obj-$(CONFIG_PCI_IOV)		+= iov.o
+obj-$(CONFIG_ACPI)		+= pci-acpi.o
+obj-$(CONFIG_PCI_LABEL)		+= pci-label.o
+obj-$(CONFIG_X86_INTEL_MID)	+= pci-mid.o
+obj-$(CONFIG_PCI_SYSCALL)	+= syscall.o
+obj-$(CONFIG_PCI_STUB)		+= pci-stub.o
+obj-$(CONFIG_PCI_ECAM)		+= ecam.o
 obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
 
-ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
-
-# PCI host controller drivers
-obj-y += host/
-obj-y += switch/
+obj-y				+= host/
+obj-y				+= switch/
 
+# Endpoint library must be initialized before its users
 obj-$(CONFIG_PCI_ENDPOINT)	+= endpoint/
 
-# Endpoint library must be initialized before its users
 obj-$(CONFIG_PCIE_CADENCE)	+= cadence/
 # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
 obj-y				+= dwc/
+
+ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG

drivers/pci/access.c

@@ -17,9 +17,9 @@
 DEFINE_RAW_SPINLOCK(pci_lock);
 
 /*
- *  Wrappers for all PCI configuration access functions.  They just check
- *  alignment, do locking and call the low-level functions pointed to
- *  by pci_dev->ops.
+ * Wrappers for all PCI configuration access functions.  They just check
+ * alignment, do locking and call the low-level functions pointed to
+ * by pci_dev->ops.
  */
 
 #define PCI_byte_BAD 0
@@ -686,8 +686,10 @@ void pci_cfg_access_unlock(struct pci_dev *dev)
 
 	raw_spin_lock_irqsave(&pci_lock, flags);
 
-	/* This indicates a problem in the caller, but we don't need
-	 * to kill them, unlike a double-block above. */
+	/*
+	 * This indicates a problem in the caller, but we don't need
+	 * to kill them, unlike a double-block above.
+	 */
 	WARN_ON(!dev->block_cfg_access);
 
 	dev->block_cfg_access = 0;

drivers/pci/ats.c

@@ -1,14 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * drivers/pci/ats.c
- *
- * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
- * Copyright (C) 2011 Advanced Micro Devices,
- *
- * PCI Express I/O Virtualization (IOV) support.
+ * PCI Express I/O Virtualization (IOV) support
  *   Address Translation Service 1.0
  *   Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com>
  *   PASID support added by Joerg Roedel <joerg.roedel@amd.com>
+ *
+ * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
+ * Copyright (C) 2011 Advanced Micro Devices,
  */
 
 #include <linux/export.h>

drivers/pci/bus.c

@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *	drivers/pci/bus.c
- *
  * From setup-res.c, by:
  *	Dave Rusling (david.rusling@reo.mts.dec.com)
  *	David Mosberger (davidm@cs.arizona.edu)

drivers/pci/host-bridge.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * host bridge related code
+ * Host bridge related code
  */
 
 #include <linux/kernel.h>

drivers/pci/iov.c

@@ -1,12 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * drivers/pci/iov.c
- *
- * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
- *
- * PCI Express I/O Virtualization (IOV) support.
+ * PCI Express I/O Virtualization (IOV) support
  *   Single Root IOV 1.0
  *   Address Translation Service 1.0
+ *
+ * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
  */
 
 #include <linux/pci.h>

drivers/pci/mmap.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * mmap.c — generic PCI resource mmap helper
+ * Generic PCI resource mmap helper
  *
  * Copyright © 2017 Amazon.com, Inc. or its affiliates.
  *

drivers/pci/msi.c

@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * File:	msi.c
- * Purpose:	PCI Message Signaled Interrupt (MSI)
+ * PCI Message Signaled Interrupt (MSI)
  *
  * Copyright (C) 2003-2004 Intel
  * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)

drivers/pci/pci-acpi.c

@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * File:	pci-acpi.c
- * Purpose:	Provide PCI support in ACPI
+ * PCI support in ACPI
  *
  * Copyright (C) 2005 David Shaohua Li <shaohua.li@intel.com>
  * Copyright (C) 2004 Tom Long Nguyen <tom.l.nguyen@intel.com>

drivers/pci/pci-driver.c

@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * drivers/pci/pci-driver.c
- *
  * (C) Copyright 2002-2004, 2007 Greg Kroah-Hartman <greg@kroah.com>
  * (C) Copyright 2007 Novell Inc.
  */

drivers/pci/pci-label.c

@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Purpose: Export the firmware instance and label associated with
- * a pci device to sysfs
+ * Export the firmware instance and label associated with a PCI device to
+ * sysfs
+ *
  * Copyright (C) 2010 Dell Inc.
  * by Narendra K <Narendra_K@dell.com>,
  * Jordan Hargrave <Jordan_Hargrave@dell.com>

drivers/pci/pci-stub.c

@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
-/* pci-stub - simple stub driver to reserve a pci device
+/*
+ * Simple stub driver to reserve a PCI device
  *
  * Copyright (C) 2008 Red Hat, Inc.
  * Author:

drivers/pci/pci-sysfs.c

@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * drivers/pci/pci-sysfs.c
- *
  * (C) Copyright 2002-2004 Greg Kroah-Hartman <greg@kroah.com>
  * (C) Copyright 2002-2004 IBM Corp.
  * (C) Copyright 2003 Matthew Wilcox
@@ -12,7 +10,6 @@
  * File attributes for PCI devices
  *
  * Modeled after usb's driverfs.c
- *
  */
 
 

drivers/pci/pci.c

@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *	PCI Bus Services, see include/linux/pci.h for further explanation.
+ * PCI Bus Services, see include/linux/pci.h for further explanation.
  *
- *	Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
- *	David Mosberger-Tang
+ * Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
+ * David Mosberger-Tang
  *
- *	Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
+ * Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
  */
 
 #include <linux/acpi.h>
@@ -4126,6 +4126,7 @@ void pci_reset_secondary_bus(struct pci_dev *dev)
 	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
 	ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
 	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+
 	/*
 	 * PCI spec v3.0 7.6.4.2 requires minimum Trst of 1ms.  Double
 	 * this to 2ms to ensure that we meet the minimum requirement.
@@ -5728,8 +5729,9 @@ static int of_pci_bus_find_domain_nr(struct device *parent)
 		use_dt_domains = 0;
 		domain = pci_get_new_domain_nr();
 	} else {
-		dev_err(parent, "Node %pOF has inconsistent \"linux,pci-domain\" property in DT\n",
-			parent->of_node);
+		if (parent)
+			pr_err("Node %pOF has ", parent->of_node);
+		pr_err("Inconsistent \"linux,pci-domain\" property in DT\n");
 		domain = -1;
 	}
 

drivers/pci/pcie/Makefile

@@ -1,20 +1,14 @@
 # SPDX-License-Identifier: GPL-2.0
 #
-# Makefile for PCI-Express PORT Driver
-#
-
-# Build PCI Express ASPM if needed
-obj-$(CONFIG_PCIEASPM)		+= aspm.o
+# Makefile for PCI Express features and port driver
 
 pcieportdrv-y			:= portdrv_core.o portdrv_pci.o portdrv_bus.o
 pcieportdrv-$(CONFIG_ACPI)	+= portdrv_acpi.o
 
 obj-$(CONFIG_PCIEPORTBUS)	+= pcieportdrv.o
 
-# Build PCI Express AER if needed
+obj-$(CONFIG_PCIEASPM)		+= aspm.o
 obj-$(CONFIG_PCIEAER)		+= aer/
-
-obj-$(CONFIG_PCIE_PME) += pme.o
-
-obj-$(CONFIG_PCIE_DPC) += pcie-dpc.o
-obj-$(CONFIG_PCIE_PTM) += ptm.o
+obj-$(CONFIG_PCIE_PME)		+= pme.o
+obj-$(CONFIG_PCIE_DPC)		+= pcie-dpc.o
+obj-$(CONFIG_PCIE_PTM)		+= ptm.o

drivers/pci/pcie/aer/aerdrv.c

@@ -1,15 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * drivers/pci/pcie/aer/aerdrv.c
- *
- * This file implements the AER root port service driver. The driver will
- * register an irq handler. When root port triggers an AER interrupt, the irq
- * handler will collect root port status and schedule a work.
+ * Implement the AER root port service driver. The driver registers an IRQ
+ * handler. When a root port triggers an AER interrupt, the IRQ handler
+ * collects root port status and schedules work.
  *
  * Copyright (C) 2006 Intel Corp.
  *	Tom Long Nguyen (tom.l.nguyen@intel.com)
  *	Zhang Yanmin (yanmin.zhang@intel.com)
- *
  */
 
 #include <linux/pci.h>

drivers/pci/pcie/aer/aerdrv.h

@@ -3,7 +3,6 @@
  * Copyright (C) 2006 Intel Corp.
  *	Tom Long Nguyen (tom.l.nguyen@intel.com)
  *	Zhang Yanmin (yanmin.zhang@intel.com)
- *
  */
 
 #ifndef _AERDRV_H_

drivers/pci/pcie/aer/aerdrv_acpi.c

@@ -5,7 +5,6 @@
  * Copyright (C) 2006 Intel Corp.
  *	Tom Long Nguyen (tom.l.nguyen@intel.com)
  *	Zhang Yanmin (yanmin.zhang@intel.com)
- *
  */
 
 #include <linux/module.h>

drivers/pci/pcie/aer/aerdrv_core.c

@@ -1,16 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * drivers/pci/pcie/aer/aerdrv_core.c
- *
- * This file implements the core part of PCIe AER. When a PCIe
- * error is delivered, an error message will be collected and printed to
- * console, then, an error recovery procedure will be executed by following
- * the PCI error recovery rules.
+ * Implement the core part of PCIe AER. When a PCIe error is delivered, an
+ * error message will be collected and printed to console, then an error
+ * recovery procedure will be executed by following the PCI error recovery
+ * rules.
  *
  * Copyright (C) 2006 Intel Corp.
  *	Tom Long Nguyen (tom.l.nguyen@intel.com)
  *	Zhang Yanmin (yanmin.zhang@intel.com)
- *
  */
 
 #include <linux/module.h>

drivers/pci/pcie/aer/aerdrv_errprint.c

@@ -1,13 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * drivers/pci/pcie/aer/aerdrv_errprint.c
- *
  * Format error messages and print them to console.
  *
  * Copyright (C) 2006 Intel Corp.
  *	Tom Long Nguyen (tom.l.nguyen@intel.com)
  *	Zhang Yanmin (yanmin.zhang@intel.com)
- *
  */
 
 #include <linux/module.h>

drivers/pci/pcie/aer/ecrc.c

@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *    Enables/disables PCIe ECRC checking.
+ * Enable/disable PCIe ECRC checking
  *
- *    (C) Copyright 2009 Hewlett-Packard Development Company, L.P.
+ * (C) Copyright 2009 Hewlett-Packard Development Company, L.P.
  *    Andrew Patterson <andrew.patterson@hp.com>
  */
 

drivers/pci/pcie/aspm.c

@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * File:	drivers/pci/pcie/aspm.c
- * Enabling PCIe link L0s/L1 state and Clock Power Management
+ * Enable PCIe link L0s/L1 state and Clock Power Management
  *
  * Copyright (C) 2007 Intel
  * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)

drivers/pci/pcie/portdrv.h

@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /*
- * File:	portdrv.h
  * Purpose:	PCI Express Port Bus Driver's Internal Data Structures
  *
  * Copyright (C) 2004 Intel

drivers/pci/pcie/portdrv_core.c

@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * File:	portdrv_core.c
  * Purpose:	PCI Express Port Bus Driver's Core Functions
  *
  * Copyright (C) 2004 Intel

drivers/pci/pcie/portdrv_pci.c

@@ -1,9 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * File:	portdrv_pci.c
  * Purpose:	PCI Express Port Bus Driver
  * Author:	Tom Nguyen <tom.l.nguyen@intel.com>
- * Version:	v1.0
  *
  * Copyright (C) 2004 Intel
  * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)

drivers/pci/probe.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * probe.c - PCI detection and setup code
+ * PCI detection and setup code
  */
 
 #include <linux/kernel.h>

drivers/pci/proc.c

@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *	Procfs interface for the PCI bus.
+ * Procfs interface for the PCI bus
  *
- *	Copyright (c) 1997--1999 Martin Mares <mj@ucw.cz>
+ * Copyright (c) 1997--1999 Martin Mares <mj@ucw.cz>
  */
 
 #include <linux/init.h>

drivers/pci/quirks.c

@@ -1,15 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *  This file contains work-arounds for many known PCI hardware
- *  bugs.  Devices present only on certain architectures (host
- *  bridges et cetera) should be handled in arch-specific code.
+ * This file contains work-arounds for many known PCI hardware bugs.
+ * Devices present only on certain architectures (host bridges et cetera)
+ * should be handled in arch-specific code.
  *
- *  Note: any quirks for hotpluggable devices must _NOT_ be declared __init.
+ * Note: any quirks for hotpluggable devices must _NOT_ be declared __init.
  *
- *  Copyright (c) 1999 Martin Mares <mj@ucw.cz>
+ * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
  *
- *  Init/reset quirks for USB host controllers should be in the
- *  USB quirks file, where their drivers can access reuse it.
+ * Init/reset quirks for USB host controllers should be in the USB quirks
+ * file, where their drivers can use them.
  */
 
 #include <linux/types.h>
@@ -3104,16 +3104,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
 static ktime_t fixup_debug_start(struct pci_dev *dev,
 				 void (*fn)(struct pci_dev *dev))
 {
-	ktime_t calltime = 0;
+	if (initcall_debug)
+		pci_info(dev, "calling  %pF @ %i\n", fn, task_pid_nr(current));
 
-	pci_dbg(dev, "calling %pF\n", fn);
-	if (initcall_debug) {
-		pr_debug("calling  %pF @ %i for %s\n",
-			 fn, task_pid_nr(current), dev_name(&dev->dev));
-		calltime = ktime_get();
-	}
-
-	return calltime;
+	return ktime_get();
 }
 
 static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime,
@@ -3122,13 +3116,11 @@ static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime,
 	ktime_t delta, rettime;
 	unsigned long long duration;
 
-	if (initcall_debug) {
-		rettime = ktime_get();
-		delta = ktime_sub(rettime, calltime);
-		duration = (unsigned long long) ktime_to_ns(delta) >> 10;
-		pr_debug("pci fixup %pF returned after %lld usecs for %s\n",
-			 fn, duration, dev_name(&dev->dev));
-	}
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+	if (initcall_debug || duration > 10000)
+		pci_info(dev, "%pF took %lld usecs\n", fn, duration);
 }
 
 /*

drivers/pci/rom.c

@@ -1,11 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * drivers/pci/rom.c
+ * PCI ROM access routines
  *
  * (C) Copyright 2004 Jon Smirl <jonsmirl@yahoo.com>
  * (C) Copyright 2004 Silicon Graphics, Inc. Jesse Barnes <jbarnes@sgi.com>
- *
- * PCI ROM access routines
  */
 #include <linux/kernel.h>
 #include <linux/export.h>

drivers/pci/search.c

@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *	PCI searching functions.
+ * PCI searching functions
  *
- *	Copyright (C) 1993 -- 1997 Drew Eckhardt, Frederic Potter,
+ * Copyright (C) 1993 -- 1997 Drew Eckhardt, Frederic Potter,
  *					David Mosberger-Tang
- *	Copyright (C) 1997 -- 2000 Martin Mares <mj@ucw.cz>
- *	Copyright (C) 2003 -- 2004 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 1997 -- 2000 Martin Mares <mj@ucw.cz>
+ * Copyright (C) 2003 -- 2004 Greg Kroah-Hartman <greg@kroah.com>
  */
 
 #include <linux/pci.h>

drivers/pci/setup-bus.c

@@ -1,16 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *	drivers/pci/setup-bus.c
+ * Support routines for initializing a PCI subsystem
  *
  * Extruded from code written by
  *      Dave Rusling (david.rusling@reo.mts.dec.com)
  *      David Mosberger (davidm@cs.arizona.edu)
  *	David Miller (davem@redhat.com)
  *
- * Support routines for initializing a PCI subsystem.
- */
-
-/*
  * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
  *	     PCI-PCI bridges cleanup, sorted resource allocation.
  * Feb 2002, Ivan Kokshaysky <ink@jurassic.park.msu.ru>

drivers/pci/setup-irq.c

@@ -1,13 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *	drivers/pci/setup-irq.c
+ * Support routines for initializing a PCI subsystem
  *
  * Extruded from code written by
  *      Dave Rusling (david.rusling@reo.mts.dec.com)
  *      David Mosberger (davidm@cs.arizona.edu)
  *	David Miller (davem@redhat.com)
- *
- * Support routines for initializing a PCI subsystem.
  */
 
 

drivers/pci/setup-res.c

@@ -1,18 +1,14 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *	drivers/pci/setup-res.c
+ * Support routines for initializing a PCI subsystem
  *
  * Extruded from code written by
  *      Dave Rusling (david.rusling@reo.mts.dec.com)
  *      David Mosberger (davidm@cs.arizona.edu)
  *	David Miller (davem@redhat.com)
  *
- * Support routines for initializing a PCI subsystem.
- */
-
-/* fixed for multiple pci buses, 1999 Andrea Arcangeli <andrea@suse.de> */
-
-/*
+ * Fixed for multiple PCI buses, 1999 Andrea Arcangeli <andrea@suse.de>
+ *
  * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
  *	     Resource sorting
  */

drivers/pci/slot.c

@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * drivers/pci/slot.c
  * Copyright (C) 2006 Matthew Wilcox <matthew@wil.cx>
  * Copyright (C) 2006-2009 Hewlett-Packard Development Company, L.P.
  *	Alex Chiang <achiang@hp.com>

drivers/pci/syscall.c

@@ -1,11 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *	pci_syscall.c
- *
- * For architectures where we want to allow direct access
- * to the PCI config stuff - it would probably be preferable
- * on PCs too, but there people just do it by hand with the
- * magic northbridge registers..
+ * For architectures where we want to allow direct access to the PCI config
+ * stuff - it would probably be preferable on PCs too, but there people
+ * just do it by hand with the magic northbridge registers.
  */
 
 #include <linux/errno.h>

drivers/pci/vpd.c

@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * File:	vpd.c
- * Purpose:	Provide PCI VPD support
+ * PCI VPD support
  *
  * Copyright (C) 2010 Broadcom Corporation.
  */

drivers/pci/xen-pcifront.c

@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Xen PCI Frontend.
+ * Xen PCI Frontend
  *
- *   Author: Ryan Wilson <hap9@epoch.ncsc.mil>
+ * Author: Ryan Wilson <hap9@epoch.ncsc.mil>
  */
 #include <linux/module.h>
 #include <linux/init.h>

drivers/rapidio/devices/tsi721.c

@@ -2880,8 +2880,9 @@ static int tsi721_probe(struct pci_dev *pdev,
 				 "Invalid MRRS override value %d", pcie_mrrs);
 	}
 
-	/* Adjust PCIe completion timeout. */
-	pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL2, 0xf, 0x2);
+	/* Set PCIe completion timeout to 1-10ms */
+	pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL2,
+					   PCI_EXP_DEVCTL2_COMP_TIMEOUT, 0x2);
 
 	/*
 	 * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block

include/linux/pci.h

@@ -2180,24 +2180,11 @@ int pci_parse_request_of_pci_ranges(struct device *dev,
 /* Arch may override this (weak) */
 struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus);
 
-static inline struct device_node *
-pci_device_to_OF_node(const struct pci_dev *pdev)
-{
-	return pdev ? pdev->dev.of_node : NULL;
-}
-
-static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
-{
-	return bus ? bus->dev.of_node : NULL;
-}
-
 #else	/* CONFIG_OF */
 static inline void pci_set_of_node(struct pci_dev *dev) { }
 static inline void pci_release_of_node(struct pci_dev *dev) { }
 static inline void pci_set_bus_of_node(struct pci_bus *bus) { }
 static inline void pci_release_bus_of_node(struct pci_bus *bus) { }
-static inline struct device_node *
-pci_device_to_OF_node(const struct pci_dev *pdev) { return NULL; }
 static inline struct irq_domain *
 pci_host_bridge_of_msi_domain(struct pci_bus *bus) { return NULL; }
 static inline int pci_parse_request_of_pci_ranges(struct device *dev,
@@ -2208,6 +2195,17 @@ static inline int pci_parse_request_of_pci_ranges(struct device *dev,
 }
 #endif  /* CONFIG_OF */
 
+static inline struct device_node *
+pci_device_to_OF_node(const struct pci_dev *pdev)
+{
+	return pdev ? pdev->dev.of_node : NULL;
+}
+
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+	return bus ? bus->dev.of_node : NULL;
+}
+
 #ifdef CONFIG_ACPI
 struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus);
 

include/linux/pci_ids.h

@@ -1561,6 +1561,8 @@
 #define PCI_DEVICE_ID_SERVERWORKS_CSB6LPC 0x0227
 #define PCI_DEVICE_ID_SERVERWORKS_HT1100LD 0x0408
 
+#define PCI_VENDOR_ID_ALTERA		0x1172
+
 #define PCI_VENDOR_ID_SBE		0x1176
 #define PCI_DEVICE_ID_SBE_WANXL100	0x0301
 #define PCI_DEVICE_ID_SBE_WANXL200	0x0302