Merge branch 'linus' into sched/urgent, to pick up dependencies

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/DocBook/media/v4l/media-types.xml

@@ -56,10 +56,6 @@
 	    <entry><constant>MEDIA_ENT_F_CONN_COMPOSITE</constant></entry>
 	    <entry>Connector for a RGB composite signal.</entry>
 	  </row>
-	  <row>
-	    <entry><constant>MEDIA_ENT_F_CONN_TEST</constant></entry>
-	    <entry>Connector for a test generator.</entry>
-	  </row>
 	  <row>
 	    <entry><constant>MEDIA_ENT_F_CAM_SENSOR</constant></entry>
 	    <entry>Camera video sensor entity.</entry>

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -23,6 +23,7 @@ Optional properties:
   during suspend.
 - ti,no-reset-on-init: When present, the module should not be reset at init
 - ti,no-idle-on-init: When present, the module should not be idled at init
+- ti,no-idle: When present, the module is never allowed to idle.
 
 Example:
 

Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt

@@ -0,0 +1,26 @@
+Alpine MSIX controller
+
+See arm,gic-v3.txt for SPI and MSI definitions.
+
+Required properties:
+
+- compatible: should be "al,alpine-msix"
+- reg: physical base address and size of the registers
+- interrupt-parent: specifies the parent interrupt controller.
+- interrupt-controller: identifies the node as an interrupt controller
+- msi-controller: identifies the node as an PCI Message Signaled Interrupt
+		  controller
+- al,msi-base-spi: SPI base of the MSI frame
+- al,msi-num-spis: number of SPIs assigned to the MSI frame, relative to SPI0
+
+Example:
+
+msix: msix {
+	compatible = "al,alpine-msix";
+	reg = <0x0 0xfbe00000 0x0 0x100000>;
+	interrupt-parent = <&gic>;
+	interrupt-controller;
+	msi-controller;
+	al,msi-base-spi = <160>;
+	al,msi-num-spis = <160>;
+};

Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt

@@ -16,6 +16,7 @@ Main node required properties:
 	"arm,cortex-a15-gic"
 	"arm,cortex-a7-gic"
 	"arm,cortex-a9-gic"
+	"arm,eb11mp-gic"
 	"arm,gic-400"
 	"arm,pl390"
 	"arm,tc11mp-gic"

Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt

@@ -0,0 +1,44 @@
+
+* Marvell ODMI for MSI support
+
+Some Marvell SoCs have an On-Die Message Interrupt (ODMI) controller
+which can be used by on-board peripheral for MSI interrupts.
+
+Required properties:
+
+- compatible           : The value here should contain:
+
+    "marvell,ap806-odmi-controller", "marvell,odmi-controller".
+
+- interrupt,controller : Identifies the node as an interrupt controller.
+
+- msi-controller       : Identifies the node as an MSI controller.
+
+- marvell,odmi-frames  : Number of ODMI frames available. Each frame
+                         provides a number of events.
+
+- reg                  : List of register definitions, one for each
+                         ODMI frame.
+
+- marvell,spi-base     : List of GIC base SPI interrupts, one for each
+                         ODMI frame. Those SPI interrupts are 0-based,
+                         i.e marvell,spi-base = <128> will use SPI #96.
+                         See Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
+                         for details about the GIC Device Tree binding.
+
+- interrupt-parent     : Reference to the parent interrupt controller.
+
+Example:
+
+	odmi: odmi@300000 {
+		compatible = "marvell,ap806-odm-controller",
+			     "marvell,odmi-controller";
+		interrupt-controller;
+		msi-controller;
+		marvell,odmi-frames = <4>;
+		reg = <0x300000 0x4000>,
+		      <0x304000 0x4000>,
+		      <0x308000 0x4000>,
+		      <0x30C000 0x4000>;
+		marvell,spi-base = <128>, <136>, <144>, <152>;
+	};

Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt

@@ -23,6 +23,12 @@ Optional properties:
 - mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
   to which the GIC may not route interrupts.  Valid values are 2 - 7.
   This property is ignored if the CPU is started in EIC mode.
+- mti,reserved-ipi-vectors : Specifies the range of GIC interrupts that are
+  reserved for IPIs.
+  It accepts 2 values, the 1st is the starting interrupt and the 2nd is the size
+  of the reserved range.
+  If not specified, the driver will allocate the last 2 * number of VPEs in the
+  system.
 
 Required properties for timer sub-node:
 - compatible : Should be "mti,gic-timer".
@@ -44,6 +50,7 @@ Example:
 		#interrupt-cells = <3>;
 
 		mti,reserved-cpu-vectors = <7>;
+		mti,reserved-ipi-vectors = <40 8>;
 
 		timer {
 			compatible = "mti,gic-timer";

Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt

@@ -0,0 +1,49 @@
+Sigma Designs SMP86xx/SMP87xx secondary interrupt controller
+
+Required properties:
+- compatible: should be "sigma,smp8642-intc"
+- reg: physical address of MMIO region
+- ranges: address space mapping of child nodes
+- interrupt-parent: phandle of parent interrupt controller
+- interrupt-controller: boolean
+- #address-cells: should be <1>
+- #size-cells: should be <1>
+
+One child node per control block with properties:
+- reg: address of registers for this control block
+- interrupt-controller: boolean
+- #interrupt-cells: should be <2>, interrupt index and flags per interrupts.txt
+- interrupts: interrupt spec of primary interrupt controller
+
+Example:
+
+interrupt-controller@6e000 {
+	compatible = "sigma,smp8642-intc";
+	reg = <0x6e000 0x400>;
+	ranges = <0x0 0x6e000 0x400>;
+	interrupt-parent = <&gic>;
+	interrupt-controller;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	irq0: interrupt-controller@0 {
+		reg = <0x000 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	irq1: interrupt-controller@100 {
+		reg = <0x100 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	irq2: interrupt-controller@300 {
+		reg = <0x300 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};

Documentation/kernel-parameters.txt

@@ -666,7 +666,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	clearcpuid=BITNUM [X86]
 			Disable CPUID feature X for the kernel. See
-			arch/x86/include/asm/cpufeature.h for the valid bit
+			arch/x86/include/asm/cpufeatures.h for the valid bit
 			numbers. Note the Linux specific bits are not necessarily
 			stable over kernel options, but the vendor specific
 			ones should be.
@@ -1687,6 +1687,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	ip=		[IP_PNP]
 			See Documentation/filesystems/nfs/nfsroot.txt.
 
+	irqaffinity=	[SMP] Set the default irq affinity mask
+			Format:
+			<cpu number>,...,<cpu number>
+			or
+			<cpu number>-<cpu number>
+			(must be a positive range in ascending order)
+			or a mixture
+			<cpu number>,...,<cpu number>-<cpu number>
+
 	irqfixup	[HW]
 			When an interrupt is not handled search all handlers
 			for it. Intended to get systems with badly broken
@@ -2566,6 +2575,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	nointroute	[IA-64]
 
+	noinvpcid	[X86] Disable the INVPCID cpu feature.
+
 	nojitter	[IA-64] Disables jitter checking for ITC timers.
 
 	no-kvmclock	[X86,KVM] Disable paravirtualized KVM clock driver
@@ -3491,6 +3502,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	ro		[KNL] Mount root device read-only on boot
 
+	rodata=		[KNL]
+		on	Mark read-only kernel memory as read-only (default).
+		off	Leave read-only kernel memory writable for debugging.
+
 	root=		[KNL] Root filesystem
 			See name_to_dev_t comment in init/do_mounts.c.
 
@@ -3528,6 +3543,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	sched_debug	[KNL] Enables verbose scheduler debug messages.
 
+	schedstats=	[KNL,X86] Enable or disable scheduled statistics.
+			Allowed values are enable and disable. This feature
+			incurs a small amount of overhead in the scheduler
+			but is useful for debugging and performance tuning.
+
 	skew_tick=	[KNL] Offset the periodic timer tick per cpu to mitigate
 			xtime_lock contention on larger systems, and/or RCU lock
 			contention on all systems with CONFIG_MAXSMP set.

Documentation/ptp/testptp.c

@@ -277,13 +277,15 @@ int main(int argc, char *argv[])
 			       "  %d external time stamp channels\n"
 			       "  %d programmable periodic signals\n"
 			       "  %d pulse per second\n"
-			       "  %d programmable pins\n",
+			       "  %d programmable pins\n"
+			       "  %d cross timestamping\n",
 			       caps.max_adj,
 			       caps.n_alarm,
 			       caps.n_ext_ts,
 			       caps.n_per_out,
 			       caps.pps,
-			       caps.n_pins);
+			       caps.n_pins,
+			       caps.cross_timestamping);
 		}
 	}
 

Documentation/sysctl/kernel.txt

@@ -58,6 +58,8 @@ show up in /proc/sys/kernel:
 - panic_on_stackoverflow
 - panic_on_unrecovered_nmi
 - panic_on_warn
+- perf_cpu_time_max_percent
+- perf_event_paranoid
 - pid_max
 - powersave-nap               [ PPC only ]
 - printk
@@ -639,6 +641,17 @@ allowed to execute.
 
 ==============================================================
 
+perf_event_paranoid:
+
+Controls use of the performance events system by unprivileged
+users (without CAP_SYS_ADMIN).  The default value is 1.
+
+ -1: Allow use of (almost) all events by all users
+>=0: Disallow raw tracepoint access by users without CAP_IOC_LOCK
+>=1: Disallow CPU event access by users without CAP_SYS_ADMIN
+>=2: Disallow kernel profiling by users without CAP_SYS_ADMIN
+
+==============================================================
 
 pid_max:
 
@@ -760,6 +773,14 @@ rtsig-nr shows the number of RT signals currently queued.
 
 ==============================================================
 
+sched_schedstats:
+
+Enables/disables scheduler statistics. Enabling this feature
+incurs a small amount of overhead in the scheduler but is
+useful for debugging and performance tuning.
+
+==============================================================
+
 sg-big-buff:
 
 This file shows the size of the generic SCSI (sg) buffer.

Documentation/virtual/kvm/mmu.txt

@@ -358,7 +358,8 @@ In the first case there are two additional complications:
 - if CR4.SMEP is enabled: since we've turned the page into a kernel page,
   the kernel may now execute it.  We handle this by also setting spte.nx.
   If we get a user fetch or read fault, we'll change spte.u=1 and
-  spte.nx=gpte.nx back.
+  spte.nx=gpte.nx back.  For this to work, KVM forces EFER.NX to 1 when
+  shadow paging is in use.
 - if CR4.SMAP is disabled: since the page has been changed to a kernel
   page, it can not be reused when CR4.SMAP is enabled. We set
   CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note,

Documentation/watchdog/watchdog-parameters.txt

@@ -400,3 +400,7 @@ wm8350_wdt:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------
+sun4v_wdt:
+timeout_ms: Watchdog timeout in milliseconds 1..180000, default=60000)
+nowayout: Watchdog cannot be stopped once started
+-------------------------------------------------

Documentation/x86/early-microcode.txt

@@ -40,3 +40,28 @@ cp ../microcode.bin kernel/x86/microcode/GenuineIntel.bin (or AuthenticAMD.bin)
 find . | cpio -o -H newc >../ucode.cpio
 cd ..
 cat ucode.cpio /boot/initrd-3.5.0.img >/boot/initrd-3.5.0.ucode.img
+
+Builtin microcode
+=================
+
+We can also load builtin microcode supplied through the regular firmware
+builtin method CONFIG_FIRMWARE_IN_KERNEL. Here's an example:
+
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin"
+CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
+
+This basically means, you have the following tree structure locally:
+
+/lib/firmware/
+|-- amd-ucode
+...
+|   |-- microcode_amd_fam15h.bin
+...
+|-- intel-ucode
+...
+|   |-- 06-3a-09
+...
+
+so that the build system can find those files and integrate them into
+the final kernel image. The early loader finds them and applies them.

Documentation/x86/exception-tables.txt

@@ -290,3 +290,38 @@ Due to the way that the exception table is built and needs to be ordered,
 only use exceptions for code in the .text section.  Any other section
 will cause the exception table to not be sorted correctly, and the
 exceptions will fail.
+
+Things changed when 64-bit support was added to x86 Linux. Rather than
+double the size of the exception table by expanding the two entries
+from 32-bits to 64 bits, a clever trick was used to store addresses
+as relative offsets from the table itself. The assembly code changed
+from:
+	.long 1b,3b
+to:
+        .long (from) - .
+        .long (to) - .
+
+and the C-code that uses these values converts back to absolute addresses
+like this:
+
+	ex_insn_addr(const struct exception_table_entry *x)
+	{
+		return (unsigned long)&x->insn + x->insn;
+	}
+
+In v4.6 the exception table entry was expanded with a new field "handler".
+This is also 32-bits wide and contains a third relative function
+pointer which points to one of:
+
+1) int ex_handler_default(const struct exception_table_entry *fixup)
+   This is legacy case that just jumps to the fixup code
+2) int ex_handler_fault(const struct exception_table_entry *fixup)
+   This case provides the fault number of the trap that occurred at
+   entry->insn. It is used to distinguish page faults from machine
+   check.
+3) int ex_handler_ext(const struct exception_table_entry *fixup)
+   This case is used for uaccess_err ... we need to set a flag
+   in the task structure. Before the handler functions existed this
+   case was handled by adding a large offset to the fixup to tag
+   it as special.
+More functions can easily be added.

Documentation/x86/x86_64/boot-options.txt

@@ -60,6 +60,8 @@ Machine check
 		threshold to 1. Enabling this may make memory predictive failure
 		analysis less effective if the bios sets thresholds for memory
 		errors since we will not see details for all errors.
+   mce=recovery
+		Force-enable recoverable machine check code paths
 
    nomce (for compatibility with i386): same as mce=off
 

MAINTAINERS

@@ -2422,6 +2422,7 @@ F:	arch/mips/bmips/*
 F:	arch/mips/include/asm/mach-bmips/*
 F:	arch/mips/kernel/*bmips*
 F:	arch/mips/boot/dts/brcm/bcm*.dts*
+F:	drivers/irqchip/irq-bcm63*
 F:	drivers/irqchip/irq-bcm7*
 F:	drivers/irqchip/irq-brcmstb*
 F:	include/linux/bcm963xx_nvram.h
@@ -4518,6 +4519,12 @@ L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	drivers/dma/fsldma.*
 
+FREESCALE GPMI NAND DRIVER
+M:	Han Xu <han.xu@nxp.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/nand/gpmi-nand/*
+
 FREESCALE I2C CPM DRIVER
 M:	Jochen Friedrich <jochen@scram.de>
 L:	linuxppc-dev@lists.ozlabs.org
@@ -4534,7 +4541,7 @@ F:	include/linux/platform_data/video-imxfb.h
 F:	drivers/video/fbdev/imxfb.c
 
 FREESCALE QUAD SPI DRIVER
-M:	Han Xu <han.xu@freescale.com>
+M:	Han Xu <han.xu@nxp.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/spi-nor/fsl-quadspi.c
@@ -4548,6 +4555,15 @@ S:	Maintained
 F:	drivers/net/ethernet/freescale/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
+FREESCALE IMX / MXC FEC DRIVER
+M:	Fugang Duan <fugang.duan@nxp.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/freescale/fec_main.c
+F:	drivers/net/ethernet/freescale/fec_ptp.c
+F:	drivers/net/ethernet/freescale/fec.h
+F:	Documentation/devicetree/bindings/net/fsl-fec.txt
+
 FREESCALE QUICC ENGINE LIBRARY
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Orphan
@@ -6764,6 +6780,7 @@ S:	Maintained
 F:	Documentation/networking/mac80211-injection.txt
 F:	include/net/mac80211.h
 F:	net/mac80211/
+F:	drivers/net/wireless/mac80211_hwsim.[ch]
 
 MACVLAN DRIVER
 M:	Patrick McHardy <kaber@trash.net>
@@ -7383,6 +7400,17 @@ W:	https://www.myricom.com/support/downloads/myri10ge.html
 S:	Supported
 F:	drivers/net/ethernet/myricom/myri10ge/
 
+NAND FLASH SUBSYSTEM
+M:	Boris Brezillon <boris.brezillon@free-electrons.com>
+R:	Richard Weinberger <richard@nod.at>
+L:	linux-mtd@lists.infradead.org
+W:	http://www.linux-mtd.infradead.org/
+Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
+T:	git git://github.com/linux-nand/linux.git
+S:	Maintained
+F:	drivers/mtd/nand/
+F:	include/linux/mtd/nand*.h
+
 NATSEMI ETHERNET DRIVER (DP8381x)
 S:	Orphan
 F:	drivers/net/ethernet/natsemi/natsemi.c
@@ -8448,6 +8476,7 @@ PERFORMANCE EVENTS SUBSYSTEM
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	Arnaldo Carvalho de Melo <acme@kernel.org>
+R:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
 L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Supported

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION =
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*

arch/alpha/kernel/smp.c

@@ -168,7 +168,7 @@ smp_callin(void)
 	      cpuid, current, current->active_mm));
 
 	preempt_disable();
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 /* Wait until hwrpb->txrdy is clear for cpu.  Return -1 on timeout.  */

arch/arc/kernel/smp.c

@@ -142,7 +142,7 @@ void start_kernel_secondary(void)
 
 	local_irq_enable();
 	preempt_disable();
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 /*

arch/arm/boot/compressed/Makefile

@@ -195,5 +195,7 @@ CFLAGS_font.o := -Dstatic=
 $(obj)/font.c: $(FONTC)
 	$(call cmd,shipped)
 
+AFLAGS_hyp-stub.o := -Wa,-march=armv7-a
+
 $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
 	$(call cmd,shipped)

arch/arm/boot/dts/armada-xp-axpwifiap.dts

@@ -70,8 +70,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";

arch/arm/boot/dts/armada-xp-db.dts

@@ -76,8 +76,8 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		devbus-bootcs {
 			status = "okay";

arch/arm/boot/dts/armada-xp-gp.dts

@@ -95,8 +95,8 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		devbus-bootcs {
 			status = "okay";

arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts

@@ -65,8 +65,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
 			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";

arch/arm/boot/dts/armada-xp-linksys-mamba.dts

@@ -70,8 +70,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";

arch/arm/boot/dts/armada-xp-matrix.dts

@@ -68,8 +68,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		internal-regs {
 			serial@12000 {

arch/arm/boot/dts/armada-xp-netgear-rn2120.dts

@@ -64,8 +64,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -65,9 +65,9 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		devbus-bootcs {
 			status = "okay";

arch/arm/boot/dts/armada-xp-synology-ds414.dts

@@ -78,8 +78,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";

arch/arm/boot/dts/dra7.dtsi

@@ -1500,6 +1500,16 @@
 			       0x48485200 0x2E00>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			/*
+			 * Do not allow gating of cpsw clock as workaround
+			 * for errata i877. Keeping internal clock disabled
+			 * causes the device switching characteristics
+			 * to degrade over time and eventually fail to meet
+			 * the data manual delay time/skew specs.
+			 */
+			ti,no-idle;
+
 			/*
 			 * rx_thresh_pend
 			 * rx_pend

arch/arm/boot/dts/r8a7791-porter.dts

@@ -283,7 +283,6 @@
 	pinctrl-names = "default";
 
 	status = "okay";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 };
 
 &usbphy {

arch/arm/include/asm/cacheflush.h

@@ -491,7 +491,6 @@ static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; }
 #endif
 
 #ifdef CONFIG_DEBUG_RODATA
-void mark_rodata_ro(void);
 void set_kernel_text_rw(void);
 void set_kernel_text_ro(void);
 #else

arch/arm/kernel/Makefile

@@ -88,6 +88,7 @@ obj-$(CONFIG_DEBUG_LL)	+= debug.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-$(CONFIG_ARM_VIRT_EXT)	+= hyp-stub.o
+AFLAGS_hyp-stub.o		:=-Wa,-march=armv7-a
 ifeq ($(CONFIG_ARM_PSCI),y)
 obj-$(CONFIG_SMP)		+= psci_smp.o
 endif

arch/arm/kernel/setup.c

@@ -176,13 +176,13 @@ static struct resource mem_res[] = {
 		.name = "Kernel code",
 		.start = 0,
 		.end = 0,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_SYSTEM_RAM
 	},
 	{
 		.name = "Kernel data",
 		.start = 0,
 		.end = 0,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_SYSTEM_RAM
 	}
 };
 
@@ -851,7 +851,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
 		res->name  = "System RAM";
 		res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
 		res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 
 		request_resource(&iomem_resource, res);
 

arch/arm/kernel/smp.c

@@ -409,7 +409,7 @@ asmlinkage void secondary_start_kernel(void)
 	/*
 	 * OK, it's off to the idle thread for us
 	 */
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)

arch/arm/kvm/arm.c

@@ -506,18 +506,18 @@ static void kvm_arm_resume_guest(struct kvm *kvm)
 	struct kvm_vcpu *vcpu;
 
 	kvm_for_each_vcpu(i, vcpu, kvm) {
-		wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu);
+		struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu);
 
 		vcpu->arch.pause = false;
-		wake_up_interruptible(wq);
+		swake_up(wq);
 	}
 }
 
 static void vcpu_sleep(struct kvm_vcpu *vcpu)
 {
-	wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu);
+	struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu);
 
-	wait_event_interruptible(*wq, ((!vcpu->arch.power_off) &&
+	swait_event_interruptible(*wq, ((!vcpu->arch.power_off) &&
 				       (!vcpu->arch.pause)));
 }
 

arch/arm/kvm/guest.c

@@ -161,7 +161,7 @@ static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	u64 val;
 
 	val = kvm_arm_timer_get_reg(vcpu, reg->id);
-	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id));
+	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0;
 }
 
 static unsigned long num_core_regs(void)

arch/arm/kvm/psci.c

@@ -70,7 +70,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 {
 	struct kvm *kvm = source_vcpu->kvm;
 	struct kvm_vcpu *vcpu = NULL;
-	wait_queue_head_t *wq;
+	struct swait_queue_head *wq;
 	unsigned long cpu_id;
 	unsigned long context_id;
 	phys_addr_t target_pc;
@@ -119,7 +119,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	smp_mb();		/* Make sure the above is visible */
 
 	wq = kvm_arch_vcpu_wq(vcpu);
-	wake_up_interruptible(wq);
+	swake_up(wq);
 
 	return PSCI_RET_SUCCESS;
 }

arch/arm/mach-lpc32xx/phy3250.c

@@ -86,8 +86,8 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb)
 {
 	dma_addr_t dma;
 
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
-		PANEL_SIZE, &dma, GFP_KERNEL);
+	fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, PANEL_SIZE, &dma,
+					  GFP_KERNEL);
 	if (!fb->fb.screen_base) {
 		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 		return -ENOMEM;
@@ -116,15 +116,14 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb)
 
 static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 {
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-		fb->fb.screen_base, fb->fb.fix.smem_start,
-		fb->fb.fix.smem_len);
+	return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
+			   fb->fb.fix.smem_start, fb->fb.fix.smem_len);
 }
 
 static void lpc32xx_clcd_remove(struct clcd_fb *fb)
 {
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-		fb->fb.screen_base, fb->fb.fix.smem_start);
+	dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
+		    fb->fb.fix.smem_start);
 }
 
 /*

arch/arm/mach-mvebu/Kconfig

@@ -3,7 +3,6 @@ menuconfig ARCH_MVEBU
 	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
 	select PINCTRL
 	select PLAT_ORION
 	select SOC_BUS
@@ -29,6 +28,7 @@ config MACH_ARMADA_370
 	bool "Marvell Armada 370 boards"
 	depends on ARCH_MULTI_V7
 	select ARMADA_370_CLK
+	select ARMADA_370_XP_IRQ
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_370
@@ -39,6 +39,7 @@ config MACH_ARMADA_370
 config MACH_ARMADA_375
 	bool "Marvell Armada 375 boards"
 	depends on ARCH_MULTI_V7
+	select ARMADA_370_XP_IRQ
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
@@ -58,6 +59,7 @@ config MACH_ARMADA_38X
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
+	select ARMADA_370_XP_IRQ
 	select ARMADA_38X_CLK
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
@@ -72,6 +74,7 @@ config MACH_ARMADA_39X
 	bool "Marvell Armada 39x boards"
 	depends on ARCH_MULTI_V7
 	select ARM_GIC
+	select ARMADA_370_XP_IRQ
 	select ARMADA_39X_CLK
 	select CACHE_L2X0
 	select HAVE_ARM_SCU
@@ -86,6 +89,7 @@ config MACH_ARMADA_39X
 config MACH_ARMADA_XP
 	bool "Marvell Armada XP boards"
 	depends on ARCH_MULTI_V7
+	select ARMADA_370_XP_IRQ
 	select ARMADA_XP_CLK
 	select CPU_PJ4B
 	select MACH_MVEBU_V7

arch/arm/mach-netx/fb.c

@@ -42,8 +42,8 @@ int netx_clcd_setup(struct clcd_fb *fb)
 
 	fb->panel = netx_panel;
 
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, 1024*1024,
-						    &dma, GFP_KERNEL);
+	fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, 1024 * 1024, &dma,
+					  GFP_KERNEL);
 	if (!fb->fb.screen_base) {
 		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 		return -ENOMEM;
@@ -57,16 +57,14 @@ int netx_clcd_setup(struct clcd_fb *fb)
 
 int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 {
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-				     fb->fb.screen_base,
-				     fb->fb.fix.smem_start,
-				     fb->fb.fix.smem_len);
+	return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
+			   fb->fb.fix.smem_start, fb->fb.fix.smem_len);
 }
 
 void netx_clcd_remove(struct clcd_fb *fb)
 {
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-			      fb->fb.screen_base, fb->fb.fix.smem_start);
+	dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
+		    fb->fb.fix.smem_start);
 }
 
 static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);

arch/arm/mach-nspire/clcd.c

@@ -90,8 +90,8 @@ int nspire_clcd_setup(struct clcd_fb *fb)
 	panel_size = ((panel->mode.xres * panel->mode.yres) * panel->bpp) / 8;
 	panel_size = ALIGN(panel_size, PAGE_SIZE);
 
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
-		panel_size, &dma, GFP_KERNEL);
+	fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, panel_size, &dma,
+					  GFP_KERNEL);
 
 	if (!fb->fb.screen_base) {
 		pr_err("CLCD: unable to map framebuffer\n");
@@ -107,13 +107,12 @@ int nspire_clcd_setup(struct clcd_fb *fb)
 
 int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 {
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-		fb->fb.screen_base, fb->fb.fix.smem_start,
-		fb->fb.fix.smem_len);
+	return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
+			   fb->fb.fix.smem_start, fb->fb.fix.smem_len);
 }
 
 void nspire_clcd_remove(struct clcd_fb *fb)
 {
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-		fb->fb.screen_base, fb->fb.fix.smem_start);
+	dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
+		    fb->fb.fix.smem_start);
 }

arch/arm/mach-omap2/omap_hwmod.c

@@ -2200,6 +2200,11 @@ static int _enable(struct omap_hwmod *oh)
  */
 static int _idle(struct omap_hwmod *oh)
 {
+	if (oh->flags & HWMOD_NO_IDLE) {
+		oh->_int_flags |= _HWMOD_SKIP_ENABLE;
+		return 0;
+	}
+
 	pr_debug("omap_hwmod: %s: idling\n", oh->name);
 
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
@@ -2504,6 +2509,8 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 			oh->flags |= HWMOD_INIT_NO_RESET;
 		if (of_find_property(np, "ti,no-idle-on-init", NULL))
 			oh->flags |= HWMOD_INIT_NO_IDLE;
+		if (of_find_property(np, "ti,no-idle", NULL))
+			oh->flags |= HWMOD_NO_IDLE;
 	}
 
 	oh->_state = _HWMOD_STATE_INITIALIZED;
@@ -2630,7 +2637,7 @@ static void __init _setup_postsetup(struct omap_hwmod *oh)
 	 * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data -
 	 * it should be set by the core code as a runtime flag during startup
 	 */
-	if ((oh->flags & HWMOD_INIT_NO_IDLE) &&
+	if ((oh->flags & (HWMOD_INIT_NO_IDLE | HWMOD_NO_IDLE)) &&
 	    (postsetup_state == _HWMOD_STATE_IDLE)) {
 		oh->_int_flags |= _HWMOD_SKIP_ENABLE;
 		postsetup_state = _HWMOD_STATE_ENABLED;

arch/arm/mach-omap2/omap_hwmod.h

@@ -525,6 +525,8 @@ struct omap_hwmod_omap4_prcm {
  *     or idled.
  * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to
  *     operate and they need to be handled at the same time as the main_clk.
+ * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain
+ *     IPs like CPSW on DRA7, where clocks to this module cannot be disabled.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -541,6 +543,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_SWSUP_SIDLE_ACT			(1 << 12)
 #define HWMOD_RECONFIG_IO_CHAIN			(1 << 13)
 #define HWMOD_OPT_CLKS_NEEDED			(1 << 14)
+#define HWMOD_NO_IDLE				(1 << 15)
 
 /*
  * omap_hwmod._int_flags definitions

arch/arm/mm/pageattr.c

@@ -49,6 +49,9 @@ static int change_memory_common(unsigned long addr, int numpages,
 		WARN_ON_ONCE(1);
 	}
 
+	if (!numpages)
+		return 0;
+
 	if (start < MODULES_VADDR || start >= MODULES_END)
 		return -EINVAL;
 

arch/arm/plat-samsung/pm-check.c

@@ -53,8 +53,8 @@ static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
 		if (ptr->child != NULL)
 			s3c_pm_run_res(ptr->child, fn, arg);
 
-		if ((ptr->flags & IORESOURCE_MEM) &&
-		    strcmp(ptr->name, "System RAM") == 0) {
+		if ((ptr->flags & IORESOURCE_SYSTEM_RAM)
+				== IORESOURCE_SYSTEM_RAM) {
 			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
 				  (unsigned long)ptr->start,
 				  (unsigned long)ptr->end);

arch/arm/vdso/vdso.S

@@ -23,9 +23,8 @@
 #include <linux/const.h>
 #include <asm/page.h>
 
-	__PAGE_ALIGNED_DATA
-
 	.globl vdso_start, vdso_end
+	.section .data..ro_after_init
 	.balign PAGE_SIZE
 vdso_start:
 	.incbin "arch/arm/vdso/vdso.so"

arch/arm64/include/asm/cacheflush.h

@@ -156,8 +156,4 @@ int set_memory_rw(unsigned long addr, int numpages);
 int set_memory_x(unsigned long addr, int numpages);
 int set_memory_nx(unsigned long addr, int numpages);
 
-#ifdef CONFIG_DEBUG_RODATA
-void mark_rodata_ro(void);
-#endif
-
 #endif

arch/arm64/include/asm/pgtable.h

@@ -34,7 +34,7 @@
 /*
  * VMALLOC and SPARSEMEM_VMEMMAP ranges.
  *
- * VMEMAP_SIZE: allows the whole VA space to be covered by a struct page array
+ * VMEMAP_SIZE: allows the whole linear region to be covered by a struct page array
  *	(rounded up to PUD_SIZE).
  * VMALLOC_START: beginning of the kernel VA space
  * VMALLOC_END: extends to the available space below vmmemmap, PCI I/O space,
@@ -51,7 +51,9 @@
 
 #define VMALLOC_END		(PAGE_OFFSET - PUD_SIZE - VMEMMAP_SIZE - SZ_64K)
 
-#define vmemmap			((struct page *)(VMALLOC_END + SZ_64K))
+#define VMEMMAP_START		(VMALLOC_END + SZ_64K)
+#define vmemmap			((struct page *)VMEMMAP_START - \
+				 SECTION_ALIGN_DOWN(memstart_addr >> PAGE_SHIFT))
 
 #define FIRST_USER_ADDRESS	0UL
 

arch/arm64/kernel/setup.c

@@ -73,13 +73,13 @@ static struct resource mem_res[] = {
 		.name = "Kernel code",
 		.start = 0,
 		.end = 0,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_SYSTEM_RAM
 	},
 	{
 		.name = "Kernel data",
 		.start = 0,
 		.end = 0,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_SYSTEM_RAM
 	}
 };
 
@@ -210,7 +210,7 @@ static void __init request_standard_resources(void)
 		res->name  = "System RAM";
 		res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
 		res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 
 		request_resource(&iomem_resource, res);
 

arch/arm64/kernel/sleep.S

@@ -145,6 +145,10 @@ ENTRY(cpu_resume_mmu)
 ENDPROC(cpu_resume_mmu)
 	.popsection
 cpu_resume_after_mmu:
+#ifdef CONFIG_KASAN
+	mov	x0, sp
+	bl	kasan_unpoison_remaining_stack
+#endif
 	mov	x0, #0			// return zero on success
 	ldp	x19, x20, [sp, #16]
 	ldp	x21, x22, [sp, #32]

arch/arm64/kernel/smp.c

@@ -195,7 +195,7 @@ asmlinkage void secondary_start_kernel(void)
 	/*
 	 * OK, it's off to the idle thread for us
 	 */
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm64/kvm/guest.c

@@ -194,7 +194,7 @@ static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	u64 val;
 
 	val = kvm_arm_timer_get_reg(vcpu, reg->id);
-	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id));
+	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0;
 }
 
 /**

arch/arm64/mm/hugetlbpage.c

@@ -306,10 +306,6 @@ static __init int setup_hugepagesz(char *opt)
 		hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
 	} else if (ps == PUD_SIZE) {
 		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
-	} else if (ps == (PAGE_SIZE * CONT_PTES)) {
-		hugetlb_add_hstate(CONT_PTE_SHIFT);
-	} else if (ps == (PMD_SIZE * CONT_PMDS)) {
-		hugetlb_add_hstate((PMD_SHIFT + CONT_PMD_SHIFT) - PAGE_SHIFT);
 	} else {
 		pr_err("hugepagesz: Unsupported page size %lu K\n", ps >> 10);
 		return 0;
@@ -317,13 +313,3 @@ static __init int setup_hugepagesz(char *opt)
 	return 1;
 }
 __setup("hugepagesz=", setup_hugepagesz);
-
-#ifdef CONFIG_ARM64_64K_PAGES
-static __init int add_default_hugepagesz(void)
-{
-	if (size_to_hstate(CONT_PTES * PAGE_SIZE) == NULL)
-		hugetlb_add_hstate(CONT_PMD_SHIFT);
-	return 0;
-}
-arch_initcall(add_default_hugepagesz);
-#endif

arch/arm64/mm/init.c

@@ -319,8 +319,8 @@ void __init mem_init(void)
 #endif
 		  MLG(VMALLOC_START, VMALLOC_END),
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
-		  MLG((unsigned long)vmemmap,
-		      (unsigned long)vmemmap + VMEMMAP_SIZE),
+		  MLG(VMEMMAP_START,
+		      VMEMMAP_START + VMEMMAP_SIZE),
 		  MLM((unsigned long)virt_to_page(PAGE_OFFSET),
 		      (unsigned long)virt_to_page(high_memory)),
 #endif

arch/avr32/kernel/setup.c

@@ -49,13 +49,13 @@ static struct resource __initdata kernel_data = {
 	.name	= "Kernel data",
 	.start	= 0,
 	.end	= 0,
-	.flags	= IORESOURCE_MEM,
+	.flags	= IORESOURCE_SYSTEM_RAM,
 };
 static struct resource __initdata kernel_code = {
 	.name	= "Kernel code",
 	.start	= 0,
 	.end	= 0,
-	.flags	= IORESOURCE_MEM,
+	.flags	= IORESOURCE_SYSTEM_RAM,
 	.sibling = &kernel_data,
 };
 
@@ -134,7 +134,7 @@ add_physical_memory(resource_size_t start, resource_size_t end)
 	new->start = start;
 	new->end = end;
 	new->name = "System RAM";
-	new->flags = IORESOURCE_MEM;
+	new->flags = IORESOURCE_SYSTEM_RAM;
 
 	*pprev = new;
 }

arch/blackfin/mach-common/smp.c

@@ -333,7 +333,7 @@ void secondary_start_kernel(void)
 
 	/* We are done with local CPU inits, unblock the boot CPU. */
 	set_cpu_online(cpu, true);
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 void __init smp_prepare_boot_cpu(void)

arch/c6x/kernel/setup.c

@@ -281,8 +281,6 @@ notrace void __init machine_init(unsigned long dt_ptr)
 	 */
 	set_ist(_vectors_start);
 
-	lockdep_init();
-
 	/*
 	 * dtb is passed in from bootloader.
 	 * fdt is linked in blob.

arch/hexagon/kernel/smp.c

@@ -180,7 +180,7 @@ void start_secondary(void)
 
 	local_irq_enable();
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 

arch/ia64/kernel/efi.c

@@ -1178,7 +1178,7 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 	efi_memory_desc_t *md;
 	u64 efi_desc_size;
 	char *name;
-	unsigned long flags;
+	unsigned long flags, desc;
 
 	efi_map_start = __va(ia64_boot_param->efi_memmap);
 	efi_map_end   = efi_map_start + ia64_boot_param->efi_memmap_size;
@@ -1193,6 +1193,8 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 			continue;
 
 		flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		desc = IORES_DESC_NONE;
+
 		switch (md->type) {
 
 			case EFI_MEMORY_MAPPED_IO:
@@ -1207,14 +1209,17 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 				if (md->attribute & EFI_MEMORY_WP) {
 					name = "System ROM";
 					flags |= IORESOURCE_READONLY;
-				} else if (md->attribute == EFI_MEMORY_UC)
+				} else if (md->attribute == EFI_MEMORY_UC) {
 					name = "Uncached RAM";
-				else
+				} else {
 					name = "System RAM";
+					flags |= IORESOURCE_SYSRAM;
+				}
 				break;
 
 			case EFI_ACPI_MEMORY_NVS:
 				name = "ACPI Non-volatile Storage";
+				desc = IORES_DESC_ACPI_NV_STORAGE;
 				break;
 
 			case EFI_UNUSABLE_MEMORY:
@@ -1224,6 +1229,7 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 
 			case EFI_PERSISTENT_MEMORY:
 				name = "Persistent Memory";
+				desc = IORES_DESC_PERSISTENT_MEMORY;
 				break;
 
 			case EFI_RESERVED_TYPE:
@@ -1246,6 +1252,7 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 		res->start = md->phys_addr;
 		res->end = md->phys_addr + efi_md_size(md) - 1;
 		res->flags = flags;
+		res->desc = desc;
 
 		if (insert_resource(&iomem_resource, res) < 0)
 			kfree(res);

arch/ia64/kernel/setup.c

@@ -80,17 +80,17 @@ unsigned long vga_console_membase;
 
 static struct resource data_resource = {
 	.name	= "Kernel data",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 static struct resource code_resource = {
 	.name	= "Kernel code",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 static struct resource bss_resource = {
 	.name	= "Kernel bss",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 unsigned long ia64_max_cacheline_size;

arch/ia64/kernel/smpboot.c

@@ -454,7 +454,7 @@ start_secondary (void *unused)
 	preempt_disable();
 	smp_callin();
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 	return 0;
 }
 

arch/m32r/kernel/setup.c

@@ -70,14 +70,14 @@ static struct resource data_resource = {
 	.name   = "Kernel data",
 	.start  = 0,
 	.end    = 0,
-	.flags  = IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags  = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 static struct resource code_resource = {
 	.name   = "Kernel code",
 	.start  = 0,
 	.end    = 0,
-	.flags  = IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags  = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 unsigned long memory_start;

arch/m32r/kernel/smpboot.c

@@ -432,7 +432,7 @@ int __init start_secondary(void *unused)
 	 */
 	local_flush_tlb_all();
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 	return 0;
 }
 

arch/metag/kernel/smp.c

@@ -396,7 +396,7 @@ asmlinkage void secondary_start_kernel(void)
 	/*
 	 * OK, it's off to the idle thread for us
 	 */
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)

arch/microblaze/kernel/setup.c

@@ -130,8 +130,6 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	memset(__bss_start, 0, __bss_stop-__bss_start);
 	memset(_ssbss, 0, _esbss-_ssbss);
 
-	lockdep_init();
-
 /* initialize device tree for usage in early_printk */
 	early_init_devtree(_fdt_start);
 

arch/mips/Kconfig

@@ -151,6 +151,7 @@ config BMIPS_GENERIC
 	select CSRC_R4K
 	select SYNC_R4K
 	select COMMON_CLK
+	select BCM6345_L1_IRQ
 	select BCM7038_L1_IRQ
 	select BCM7120_L2_IRQ
 	select BRCMSTB_L2_IRQ
@@ -2169,7 +2170,6 @@ config MIPS_MT_SMP
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select SYNC_R4K
-	select MIPS_GIC_IPI
 	select MIPS_MT
 	select SMP
 	select SMP_UP
@@ -2267,7 +2267,6 @@ config MIPS_VPE_APSP_API_MT
 config MIPS_CMP
 	bool "MIPS CMP framework support (DEPRECATED)"
 	depends on SYS_SUPPORTS_MIPS_CMP && !CPU_MIPSR6
-	select MIPS_GIC_IPI
 	select SMP
 	select SYNC_R4K
 	select SYS_SUPPORTS_SMP
@@ -2287,7 +2286,6 @@ config MIPS_CPS
 	select MIPS_CM
 	select MIPS_CPC
 	select MIPS_CPS_PM if HOTPLUG_CPU
-	select MIPS_GIC_IPI
 	select SMP
 	select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
 	select SYS_SUPPORTS_HOTPLUG_CPU
@@ -2305,9 +2303,6 @@ config MIPS_CPS_PM
 	select MIPS_CPC
 	bool
 
-config MIPS_GIC_IPI
-	bool
-
 config MIPS_CM
 	bool
 

arch/mips/ath79/irq.c

@@ -26,90 +26,6 @@
 #include "common.h"
 #include "machtypes.h"
 
-static void __init ath79_misc_intc_domain_init(
-	struct device_node *node, int irq);
-
-static void ath79_misc_irq_handler(struct irq_desc *desc)
-{
-	struct irq_domain *domain = irq_desc_get_handler_data(desc);
-	void __iomem *base = domain->host_data;
-	u32 pending;
-
-	pending = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS) &
-		  __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-
-	if (!pending) {
-		spurious_interrupt();
-		return;
-	}
-
-	while (pending) {
-		int bit = __ffs(pending);
-
-		generic_handle_irq(irq_linear_revmap(domain, bit));
-		pending &= ~BIT(bit);
-	}
-}
-
-static void ar71xx_misc_irq_unmask(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->hwirq;
-	u32 t;
-
-	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-	__raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-
-	/* flush write */
-	__raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-}
-
-static void ar71xx_misc_irq_mask(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->hwirq;
-	u32 t;
-
-	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-
-	/* flush write */
-	__raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-}
-
-static void ar724x_misc_irq_ack(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->hwirq;
-	u32 t;
-
-	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS);
-	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_STATUS);
-
-	/* flush write */
-	__raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS);
-}
-
-static struct irq_chip ath79_misc_irq_chip = {
-	.name		= "MISC",
-	.irq_unmask	= ar71xx_misc_irq_unmask,
-	.irq_mask	= ar71xx_misc_irq_mask,
-};
-
-static void __init ath79_misc_irq_init(void)
-{
-	if (soc_is_ar71xx() || soc_is_ar913x())
-		ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
-	else if (soc_is_ar724x() ||
-		 soc_is_ar933x() ||
-		 soc_is_ar934x() ||
-		 soc_is_qca955x())
-		ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
-	else
-		BUG();
-
-	ath79_misc_intc_domain_init(NULL, ATH79_CPU_IRQ(6));
-}
 
 static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
 {
@@ -212,142 +128,12 @@ static void qca955x_irq_init(void)
 	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
 }
 
-/*
- * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for
- * these devices typically allocate coherent DMA memory, however the
- * DMA controller may still have some unsynchronized data in the FIFO.
- * Issue a flush in the handlers to ensure that the driver sees
- * the update.
- *
- * This array map the interrupt lines to the DDR write buffer channels.
- */
-
-static unsigned irq_wb_chan[8] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,
-};
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned long pending;
-	int irq;
-
-	pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-	if (!pending) {
-		spurious_interrupt();
-		return;
-	}
-
-	pending >>= CAUSEB_IP;
-	while (pending) {
-		irq = fls(pending) - 1;
-		if (irq < ARRAY_SIZE(irq_wb_chan) && irq_wb_chan[irq] != -1)
-			ath79_ddr_wb_flush(irq_wb_chan[irq]);
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-		pending &= ~BIT(irq);
-	}
-}
-
-static int misc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-{
-	irq_set_chip_and_handler(irq, &ath79_misc_irq_chip, handle_level_irq);
-	irq_set_chip_data(irq, d->host_data);
-	return 0;
-}
-
-static const struct irq_domain_ops misc_irq_domain_ops = {
-	.xlate = irq_domain_xlate_onecell,
-	.map = misc_map,
-};
-
-static void __init ath79_misc_intc_domain_init(
-	struct device_node *node, int irq)
-{
-	void __iomem *base = ath79_reset_base;
-	struct irq_domain *domain;
-
-	domain = irq_domain_add_legacy(node, ATH79_MISC_IRQ_COUNT,
-			ATH79_MISC_IRQ_BASE, 0, &misc_irq_domain_ops, base);
-	if (!domain)
-		panic("Failed to add MISC irqdomain");
-
-	/* Disable and clear all interrupts */
-	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
-
-	irq_set_chained_handler_and_data(irq, ath79_misc_irq_handler, domain);
-}
-
-static int __init ath79_misc_intc_of_init(
-	struct device_node *node, struct device_node *parent)
-{
-	int irq;
-
-	irq = irq_of_parse_and_map(node, 0);
-	if (!irq)
-		panic("Failed to get MISC IRQ");
-
-	ath79_misc_intc_domain_init(node, irq);
-	return 0;
-}
-
-static int __init ar7100_misc_intc_of_init(
-	struct device_node *node, struct device_node *parent)
-{
-	ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
-	return ath79_misc_intc_of_init(node, parent);
-}
-
-IRQCHIP_DECLARE(ar7100_misc_intc, "qca,ar7100-misc-intc",
-		ar7100_misc_intc_of_init);
-
-static int __init ar7240_misc_intc_of_init(
-	struct device_node *node, struct device_node *parent)
-{
-	ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
-	return ath79_misc_intc_of_init(node, parent);
-}
-
-IRQCHIP_DECLARE(ar7240_misc_intc, "qca,ar7240-misc-intc",
-		ar7240_misc_intc_of_init);
-
-static int __init ar79_cpu_intc_of_init(
-	struct device_node *node, struct device_node *parent)
-{
-	int err, i, count;
-
-	/* Fill the irq_wb_chan table */
-	count = of_count_phandle_with_args(
-		node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
-
-	for (i = 0; i < count; i++) {
-		struct of_phandle_args args;
-		u32 irq = i;
-
-		of_property_read_u32_index(
-			node, "qca,ddr-wb-channel-interrupts", i, &irq);
-		if (irq >= ARRAY_SIZE(irq_wb_chan))
-			continue;
-
-		err = of_parse_phandle_with_args(
-			node, "qca,ddr-wb-channels",
-			"#qca,ddr-wb-channel-cells",
-			i, &args);
-		if (err)
-			return err;
-
-		irq_wb_chan[irq] = args.args[0];
-		pr_info("IRQ: Set flush channel of IRQ%d to %d\n",
-			irq, args.args[0]);
-	}
-
-	return mips_cpu_irq_of_init(node, parent);
-}
-IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
-		ar79_cpu_intc_of_init);
-
 void __init arch_init_irq(void)
 {
+	unsigned irq_wb_chan2 = -1;
+	unsigned irq_wb_chan3 = -1;
+	bool misc_is_ar71xx;
+
 	if (mips_machtype == ATH79_MACH_GENERIC_OF) {
 		irqchip_init();
 		return;
@@ -355,14 +141,26 @@ void __init arch_init_irq(void)
 
 	if (soc_is_ar71xx() || soc_is_ar724x() ||
 	    soc_is_ar913x() || soc_is_ar933x()) {
-		irq_wb_chan[2] = 3;
-		irq_wb_chan[3] = 2;
+		irq_wb_chan2 = 3;
+		irq_wb_chan3 = 2;
 	} else if (soc_is_ar934x()) {
-		irq_wb_chan[3] = 2;
+		irq_wb_chan3 = 2;
 	}
 
-	mips_cpu_irq_init();
-	ath79_misc_irq_init();
+	ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3);
+
+	if (soc_is_ar71xx() || soc_is_ar913x())
+		misc_is_ar71xx = true;
+	else if (soc_is_ar724x() ||
+		 soc_is_ar933x() ||
+		 soc_is_ar934x() ||
+		 soc_is_qca955x())
+		misc_is_ar71xx = false;
+	else
+		BUG();
+	ath79_misc_irq_init(
+		ath79_reset_base + AR71XX_RESET_REG_MISC_INT_STATUS,
+		ATH79_CPU_IRQ(6), ATH79_MISC_IRQ_BASE, misc_is_ar71xx);
 
 	if (soc_is_ar934x())
 		ar934x_ip2_irq_init();

arch/mips/bmips/irq.c

@@ -15,6 +15,12 @@
 #include <asm/irq_cpu.h>
 #include <asm/time.h>
 
+static const struct of_device_id smp_intc_dt_match[] = {
+	{ .compatible = "brcm,bcm7038-l1-intc" },
+	{ .compatible = "brcm,bcm6345-l1-intc" },
+	{}
+};
+
 unsigned int get_c0_compare_int(void)
 {
 	return CP0_LEGACY_COMPARE_IRQ;
@@ -24,8 +30,8 @@ void __init arch_init_irq(void)
 {
 	struct device_node *dn;
 
-	/* Only the STB (bcm7038) controller supports SMP IRQ affinity */
-	dn = of_find_compatible_node(NULL, NULL, "brcm,bcm7038-l1-intc");
+	/* Only these controllers support SMP IRQ affinity */
+	dn = of_find_matching_node(NULL, smp_intc_dt_match);
 	if (dn)
 		of_node_put(dn);
 	else

arch/mips/boot/compressed/uart-16550.c

@@ -17,7 +17,7 @@
 #define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))
 #endif
 
-#ifdef CONFIG_MACH_JZ4740
+#if defined(CONFIG_MACH_JZ4740) || defined(CONFIG_MACH_JZ4780)
 #include <asm/mach-jz4740/base.h>
 #define PORT(offset) (CKSEG1ADDR(JZ4740_UART0_BASE_ADDR) + (4 * offset))
 #endif

arch/mips/include/asm/mach-ath79/ath79.h

@@ -144,4 +144,8 @@ static inline u32 ath79_reset_rr(unsigned reg)
 void ath79_device_reset_set(u32 mask);
 void ath79_device_reset_clear(u32 mask);
 
+void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
+void ath79_misc_irq_init(void __iomem *regs, int irq,
+			int irq_base, bool is_ar71xx);
+
 #endif /* __ASM_MACH_ATH79_H */

arch/mips/include/asm/smp-ops.h

@@ -44,8 +44,9 @@ static inline void plat_smp_setup(void)
 	mp_ops->smp_setup();
 }
 
-extern void gic_send_ipi_single(int cpu, unsigned int action);
-extern void gic_send_ipi_mask(const struct cpumask *mask, unsigned int action);
+extern void mips_smp_send_ipi_single(int cpu, unsigned int action);
+extern void mips_smp_send_ipi_mask(const struct cpumask *mask,
+				      unsigned int action);
 
 #else /* !CONFIG_SMP */
 

arch/mips/jz4740/gpio.c

@@ -270,7 +270,7 @@ uint32_t jz_gpio_port_get_value(int port, uint32_t mask)
 }
 EXPORT_SYMBOL(jz_gpio_port_get_value);
 
-#define IRQ_TO_BIT(irq) BIT(irq_to_gpio(irq) & 0x1f)
+#define IRQ_TO_BIT(irq) BIT((irq - JZ4740_IRQ_GPIO(0)) & 0x1f)
 
 static void jz_gpio_check_trigger_both(struct jz_gpio_chip *chip, unsigned int irq)
 {

arch/mips/kernel/Makefile

@@ -52,7 +52,6 @@ obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
 obj-$(CONFIG_MIPS_CMP)		+= smp-cmp.o
 obj-$(CONFIG_MIPS_CPS)		+= smp-cps.o cps-vec.o
 obj-$(CONFIG_MIPS_CPS_NS16550)	+= cps-vec-ns16550.o
-obj-$(CONFIG_MIPS_GIC_IPI)	+= smp-gic.o
 obj-$(CONFIG_MIPS_SPRAM)	+= spram.o
 
 obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o

arch/mips/kernel/r2300_fpu.S

@@ -125,7 +125,7 @@ LEAF(_restore_fp_context)
 	END(_restore_fp_context)
 	.set	reorder
 
-	.type	fault@function
+	.type	fault, @function
 	.ent	fault
 fault:	li	v0, -EFAULT
 	jr	ra

arch/mips/kernel/r4k_fpu.S

@@ -358,7 +358,7 @@ LEAF(_restore_msa_all_upper)
 
 	.set	reorder
 
-	.type	fault@function
+	.type	fault, @function
 	.ent	fault
 fault:	li	v0, -EFAULT				# failure
 	jr	ra

arch/mips/kernel/setup.c

@@ -732,21 +732,23 @@ static void __init resource_init(void)
 			end = HIGHMEM_START - 1;
 
 		res = alloc_bootmem(sizeof(struct resource));
+
+		res->start = start;
+		res->end = end;
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
 		switch (boot_mem_map.map[i].type) {
 		case BOOT_MEM_RAM:
 		case BOOT_MEM_INIT_RAM:
 		case BOOT_MEM_ROM_DATA:
 			res->name = "System RAM";
+			res->flags |= IORESOURCE_SYSRAM;
 			break;
 		case BOOT_MEM_RESERVED:
 		default:
 			res->name = "reserved";
 		}
 
-		res->start = start;
-		res->end = end;
-
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 		request_resource(&iomem_resource, res);
 
 		/*

arch/mips/kernel/smp-cmp.c

@@ -149,8 +149,8 @@ void __init cmp_prepare_cpus(unsigned int max_cpus)
 }
 
 struct plat_smp_ops cmp_smp_ops = {
-	.send_ipi_single	= gic_send_ipi_single,
-	.send_ipi_mask		= gic_send_ipi_mask,
+	.send_ipi_single	= mips_smp_send_ipi_single,
+	.send_ipi_mask		= mips_smp_send_ipi_mask,
 	.init_secondary		= cmp_init_secondary,
 	.smp_finish		= cmp_smp_finish,
 	.boot_secondary		= cmp_boot_secondary,

arch/mips/kernel/smp-cps.c

@@ -472,8 +472,8 @@ static struct plat_smp_ops cps_smp_ops = {
 	.boot_secondary		= cps_boot_secondary,
 	.init_secondary		= cps_init_secondary,
 	.smp_finish		= cps_smp_finish,
-	.send_ipi_single	= gic_send_ipi_single,
-	.send_ipi_mask		= gic_send_ipi_mask,
+	.send_ipi_single	= mips_smp_send_ipi_single,
+	.send_ipi_mask		= mips_smp_send_ipi_mask,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_disable		= cps_cpu_disable,
 	.cpu_die		= cps_cpu_die,

arch/mips/kernel/smp-mt.c

@@ -121,7 +121,7 @@ static void vsmp_send_ipi_single(int cpu, unsigned int action)
 
 #ifdef CONFIG_MIPS_GIC
 	if (gic_present) {
-		gic_send_ipi_single(cpu, action);
+		mips_smp_send_ipi_single(cpu, action);
 		return;
 	}
 #endif

arch/mips/kernel/smp.c

@@ -33,12 +33,16 @@
 #include <linux/cpu.h>
 #include <linux/err.h>
 #include <linux/ftrace.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 
 #include <linux/atomic.h>
 #include <asm/cpu.h>
 #include <asm/processor.h>
 #include <asm/idle.h>
 #include <asm/r4k-timer.h>
+#include <asm/mips-cpc.h>
 #include <asm/mmu_context.h>
 #include <asm/time.h>
 #include <asm/setup.h>
@@ -79,6 +83,11 @@ static cpumask_t cpu_core_setup_map;
 
 cpumask_t cpu_coherent_mask;
 
+#ifdef CONFIG_GENERIC_IRQ_IPI
+static struct irq_desc *call_desc;
+static struct irq_desc *sched_desc;
+#endif
+
 static inline void set_cpu_sibling_map(int cpu)
 {
 	int i;
@@ -121,6 +130,7 @@ static inline void calculate_cpu_foreign_map(void)
 	cpumask_t temp_foreign_map;
 
 	/* Re-calculate the mask */
+	cpumask_clear(&temp_foreign_map);
 	for_each_online_cpu(i) {
 		core_present = 0;
 		for_each_cpu(k, &temp_foreign_map)
@@ -145,6 +155,133 @@ void register_smp_ops(struct plat_smp_ops *ops)
 	mp_ops = ops;
 }
 
+#ifdef CONFIG_GENERIC_IRQ_IPI
+void mips_smp_send_ipi_single(int cpu, unsigned int action)
+{
+	mips_smp_send_ipi_mask(cpumask_of(cpu), action);
+}
+
+void mips_smp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+{
+	unsigned long flags;
+	unsigned int core;
+	int cpu;
+
+	local_irq_save(flags);
+
+	switch (action) {
+	case SMP_CALL_FUNCTION:
+		__ipi_send_mask(call_desc, mask);
+		break;
+
+	case SMP_RESCHEDULE_YOURSELF:
+		__ipi_send_mask(sched_desc, mask);
+		break;
+
+	default:
+		BUG();
+	}
+
+	if (mips_cpc_present()) {
+		for_each_cpu(cpu, mask) {
+			core = cpu_data[cpu].core;
+
+			if (core == current_cpu_data.core)
+				continue;
+
+			while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
+				mips_cpc_lock_other(core);
+				write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
+				mips_cpc_unlock_other();
+			}
+		}
+	}
+
+	local_irq_restore(flags);
+}
+
+
+static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
+{
+	scheduler_ipi();
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
+{
+	generic_smp_call_function_interrupt();
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+	.handler	= ipi_resched_interrupt,
+	.flags		= IRQF_PERCPU,
+	.name		= "IPI resched"
+};
+
+static struct irqaction irq_call = {
+	.handler	= ipi_call_interrupt,
+	.flags		= IRQF_PERCPU,
+	.name		= "IPI call"
+};
+
+static __init void smp_ipi_init_one(unsigned int virq,
+				    struct irqaction *action)
+{
+	int ret;
+
+	irq_set_handler(virq, handle_percpu_irq);
+	ret = setup_irq(virq, action);
+	BUG_ON(ret);
+}
+
+static int __init mips_smp_ipi_init(void)
+{
+	unsigned int call_virq, sched_virq;
+	struct irq_domain *ipidomain;
+	struct device_node *node;
+
+	node = of_irq_find_parent(of_root);
+	ipidomain = irq_find_matching_host(node, DOMAIN_BUS_IPI);
+
+	/*
+	 * Some platforms have half DT setup. So if we found irq node but
+	 * didn't find an ipidomain, try to search for one that is not in the
+	 * DT.
+	 */
+	if (node && !ipidomain)
+		ipidomain = irq_find_matching_host(NULL, DOMAIN_BUS_IPI);
+
+	BUG_ON(!ipidomain);
+
+	call_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
+	BUG_ON(!call_virq);
+
+	sched_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
+	BUG_ON(!sched_virq);
+
+	if (irq_domain_is_ipi_per_cpu(ipidomain)) {
+		int cpu;
+
+		for_each_cpu(cpu, cpu_possible_mask) {
+			smp_ipi_init_one(call_virq + cpu, &irq_call);
+			smp_ipi_init_one(sched_virq + cpu, &irq_resched);
+		}
+	} else {
+		smp_ipi_init_one(call_virq, &irq_call);
+		smp_ipi_init_one(sched_virq, &irq_resched);
+	}
+
+	call_desc = irq_to_desc(call_virq);
+	sched_desc = irq_to_desc(sched_virq);
+
+	return 0;
+}
+early_initcall(mips_smp_ipi_init);
+#endif
+
 /*
  * First C code run on the secondary CPUs after being started up by
  * the master.
@@ -191,7 +328,7 @@ asmlinkage void start_secondary(void)
 	WARN_ON_ONCE(!irqs_disabled());
 	mp_ops->smp_finish();
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 static void stop_this_cpu(void *dummy)

arch/mips/kernel/traps.c

@@ -690,15 +690,15 @@ static int simulate_sync(struct pt_regs *regs, unsigned int opcode)
 asmlinkage void do_ov(struct pt_regs *regs)
 {
 	enum ctx_state prev_state;
-	siginfo_t info;
+	siginfo_t info = {
+		.si_signo = SIGFPE,
+		.si_code = FPE_INTOVF,
+		.si_addr = (void __user *)regs->cp0_epc,
+	};
 
 	prev_state = exception_enter();
 	die_if_kernel("Integer overflow", regs);
 
-	info.si_code = FPE_INTOVF;
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_addr = (void __user *) regs->cp0_epc;
 	force_sig_info(SIGFPE, &info, current);
 	exception_exit(prev_state);
 }
@@ -874,7 +874,7 @@ out:
 void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	const char *str)
 {
-	siginfo_t info;
+	siginfo_t info = { 0 };
 	char b[40];
 
 #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
@@ -903,7 +903,6 @@ void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 		else
 			info.si_code = FPE_INTOVF;
 		info.si_signo = SIGFPE;
-		info.si_errno = 0;
 		info.si_addr = (void __user *) regs->cp0_epc;
 		force_sig_info(SIGFPE, &info, current);
 		break;

arch/mips/kvm/mips.c

@@ -445,8 +445,8 @@ int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu,
 
 	dvcpu->arch.wait = 0;
 
-	if (waitqueue_active(&dvcpu->wq))
-		wake_up_interruptible(&dvcpu->wq);
+	if (swait_active(&dvcpu->wq))
+		swake_up(&dvcpu->wq);
 
 	return 0;
 }
@@ -702,7 +702,7 @@ static int kvm_mips_get_reg(struct kvm_vcpu *vcpu,
 	} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U128) {
 		void __user *uaddr = (void __user *)(long)reg->addr;
 
-		return copy_to_user(uaddr, vs, 16);
+		return copy_to_user(uaddr, vs, 16) ? -EFAULT : 0;
 	} else {
 		return -EINVAL;
 	}
@@ -732,7 +732,7 @@ static int kvm_mips_set_reg(struct kvm_vcpu *vcpu,
 	} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U128) {
 		void __user *uaddr = (void __user *)(long)reg->addr;
 
-		return copy_from_user(vs, uaddr, 16);
+		return copy_from_user(vs, uaddr, 16) ? -EFAULT : 0;
 	} else {
 		return -EINVAL;
 	}
@@ -1174,8 +1174,8 @@ static void kvm_mips_comparecount_func(unsigned long data)
 	kvm_mips_callbacks->queue_timer_int(vcpu);
 
 	vcpu->arch.wait = 0;
-	if (waitqueue_active(&vcpu->wq))
-		wake_up_interruptible(&vcpu->wq);
+	if (swait_active(&vcpu->wq))
+		swake_up(&vcpu->wq);
 }
 
 /* low level hrtimer wake routine */

arch/mips/mm/sc-mips.c

@@ -164,11 +164,13 @@ static int __init mips_sc_probe_cm3(void)
 
 	sets = cfg & CM_GCR_L2_CONFIG_SET_SIZE_MSK;
 	sets >>= CM_GCR_L2_CONFIG_SET_SIZE_SHF;
-	c->scache.sets = 64 << sets;
+	if (sets)
+		c->scache.sets = 64 << sets;
 
 	line_sz = cfg & CM_GCR_L2_CONFIG_LINE_SIZE_MSK;
 	line_sz >>= CM_GCR_L2_CONFIG_LINE_SIZE_SHF;
-	c->scache.linesz = 2 << line_sz;
+	if (line_sz)
+		c->scache.linesz = 2 << line_sz;
 
 	assoc = cfg & CM_GCR_L2_CONFIG_ASSOC_MSK;
 	assoc >>= CM_GCR_L2_CONFIG_ASSOC_SHF;
@@ -176,9 +178,12 @@ static int __init mips_sc_probe_cm3(void)
 	c->scache.waysize = c->scache.sets * c->scache.linesz;
 	c->scache.waybit = __ffs(c->scache.waysize);
 
-	c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+	if (c->scache.linesz) {
+		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+		return 1;
+	}
 
-	return 1;
+	return 0;
 }
 
 static inline int __init mips_sc_probe(void)

arch/mn10300/kernel/smp.c

@@ -675,7 +675,7 @@ int __init start_secondary(void *unused)
 #ifdef CONFIG_GENERIC_CLOCKEVENTS
 	init_clockevents();
 #endif
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 	return 0;
 }
 

arch/parisc/include/asm/cache.h

@@ -22,6 +22,9 @@
 
 #define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
+/* Read-only memory is marked before mark_rodata_ro() is called. */
+#define __ro_after_init	__read_mostly
+
 void parisc_cache_init(void);	/* initializes cache-flushing */
 void disable_sr_hashing_asm(int); /* low level support for above */
 void disable_sr_hashing(void);   /* turns off space register hashing */

arch/parisc/include/asm/cacheflush.h

@@ -121,10 +121,6 @@ flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vma
 	}
 }
 
-#ifdef CONFIG_DEBUG_RODATA
-void mark_rodata_ro(void);
-#endif
-
 #include <asm/kmap_types.h>
 
 #define ARCH_HAS_KMAP

arch/parisc/include/asm/floppy.h

@@ -33,7 +33,7 @@
  * floppy accesses go through the track buffer.
  */
 #define _CROSS_64KB(a,s,vdma) \
-(!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
 
 #define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
 

arch/parisc/include/uapi/asm/unistd.h

@@ -361,8 +361,9 @@
 #define __NR_membarrier		(__NR_Linux + 343)
 #define __NR_userfaultfd	(__NR_Linux + 344)
 #define __NR_mlock2		(__NR_Linux + 345)
+#define __NR_copy_file_range	(__NR_Linux + 346)
 
-#define __NR_Linux_syscalls	(__NR_mlock2 + 1)
+#define __NR_Linux_syscalls	(__NR_copy_file_range + 1)
 
 
 #define __IGNORE_select		/* newselect */

arch/parisc/kernel/ptrace.c

@@ -269,14 +269,19 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	long ret = 0;
-
 	/* Do the secure computing check first. */
 	secure_computing_strict(regs->gr[20]);
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    tracehook_report_syscall_entry(regs))
-		ret = -1L;
+	    tracehook_report_syscall_entry(regs)) {
+		/*
+		 * Tracing decided this syscall should not happen or the
+		 * debugger stored an invalid system call number. Skip
+		 * the system call and the system call restart handling.
+		 */
+		regs->gr[20] = -1UL;
+		goto out;
+	}
 
 #ifdef CONFIG_64BIT
 	if (!is_compat_task())
@@ -290,7 +295,8 @@ long do_syscall_trace_enter(struct pt_regs *regs)
 			regs->gr[24] & 0xffffffff,
 			regs->gr[23] & 0xffffffff);
 
-	return ret ? : regs->gr[20];
+out:
+	return regs->gr[20];
 }
 
 void do_syscall_trace_exit(struct pt_regs *regs)

arch/parisc/kernel/smp.c

@@ -305,7 +305,7 @@ void __init smp_callin(void)
 
 	local_irq_enable();  /* Interrupts have been off until now */
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 
 	/* NOTREACHED */
 	panic("smp_callin() AAAAaaaaahhhh....\n");

arch/parisc/kernel/syscall.S

@@ -343,7 +343,7 @@ tracesys_next:
 #endif
 
 	comiclr,>>=	__NR_Linux_syscalls, %r20, %r0
-	b,n	.Lsyscall_nosys
+	b,n	.Ltracesys_nosys
 
 	LDREGX  %r20(%r19), %r19
 
@@ -359,6 +359,9 @@ tracesys_next:
 	be      0(%sr7,%r19)
 	ldo	R%tracesys_exit(%r2),%r2
 
+.Ltracesys_nosys:
+	ldo	-ENOSYS(%r0),%r28		/* set errno */
+
 	/* Do *not* call this function on the gateway page, because it
 	makes a direct call to syscall_trace. */
 	

arch/parisc/kernel/syscall_table.S

@@ -441,6 +441,7 @@
 	ENTRY_SAME(membarrier)
 	ENTRY_SAME(userfaultfd)
 	ENTRY_SAME(mlock2)		/* 345 */
+	ENTRY_SAME(copy_file_range)
 
 
 .ifne (. - 90b) - (__NR_Linux_syscalls * (91b - 90b))

arch/parisc/mm/init.c

@@ -55,12 +55,12 @@ signed char pfnnid_map[PFNNID_MAP_MAX] __read_mostly;
 
 static struct resource data_resource = {
 	.name	= "Kernel data",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
 };
 
 static struct resource code_resource = {
 	.name	= "Kernel code",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
 };
 
 static struct resource pdcdata_resource = {
@@ -201,7 +201,7 @@ static void __init setup_bootmem(void)
 		res->name = "System RAM";
 		res->start = pmem_ranges[i].start_pfn << PAGE_SHIFT;
 		res->end = res->start + (pmem_ranges[i].pages << PAGE_SHIFT)-1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 		request_resource(&iomem_resource, res);
 	}
 

arch/powerpc/include/asm/kvm_host.h

@@ -289,7 +289,7 @@ struct kvmppc_vcore {
 	struct list_head runnable_threads;
 	struct list_head preempt_list;
 	spinlock_t lock;
-	wait_queue_head_t wq;
+	struct swait_queue_head wq;
 	spinlock_t stoltb_lock;	/* protects stolen_tb and preempt_tb */
 	u64 stolen_tb;
 	u64 preempt_tb;
@@ -629,7 +629,7 @@ struct kvm_vcpu_arch {
 	u8 prodded;
 	u32 last_inst;
 
-	wait_queue_head_t *wqp;
+	struct swait_queue_head *wqp;
 	struct kvmppc_vcore *vcore;
 	int ret;
 	int trap;

arch/powerpc/kernel/hw_breakpoint.c

@@ -109,8 +109,9 @@ void arch_unregister_hw_breakpoint(struct perf_event *bp)
 	 * If the breakpoint is unregistered between a hw_breakpoint_handler()
 	 * and the single_step_dabr_instruction(), then cleanup the breakpoint
 	 * restoration variables to prevent dangling pointers.
+	 * FIXME, this should not be using bp->ctx at all! Sayeth peterz.
 	 */
-	if (bp->ctx && bp->ctx->task)
+	if (bp->ctx && bp->ctx->task && bp->ctx->task != ((void *)-1L))
 		bp->ctx->task->thread.last_hit_ubp = NULL;
 }
 

arch/powerpc/kernel/setup_32.c

@@ -114,8 +114,6 @@ extern unsigned int memset_nocache_branch; /* Insn to be replaced by NOP */
 
 notrace void __init machine_init(u64 dt_ptr)
 {
-	lockdep_init();
-
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();
 

arch/powerpc/kernel/setup_64.c

@@ -255,9 +255,6 @@ void __init early_setup(unsigned long dt_ptr)
 	setup_paca(&boot_paca);
 	fixup_boot_paca();
 
-	/* Initialize lockdep early or else spinlocks will blow */
-	lockdep_init();
-
 	/* -------- printk is now safe to use ------- */
 
 	/* Enable early debugging if any specified (see udbg.h) */

arch/powerpc/kernel/smp.c

@@ -727,7 +727,7 @@ void start_secondary(void *unused)
 
 	local_irq_enable();
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 
 	BUG();
 }

arch/powerpc/kvm/book3s_hv.c

@@ -114,11 +114,11 @@ static bool kvmppc_ipi_thread(int cpu)
 static void kvmppc_fast_vcpu_kick_hv(struct kvm_vcpu *vcpu)
 {
 	int cpu;
-	wait_queue_head_t *wqp;
+	struct swait_queue_head *wqp;
 
 	wqp = kvm_arch_vcpu_wq(vcpu);
-	if (waitqueue_active(wqp)) {
-		wake_up_interruptible(wqp);
+	if (swait_active(wqp)) {
+		swake_up(wqp);
 		++vcpu->stat.halt_wakeup;
 	}
 
@@ -701,8 +701,8 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu)
 		tvcpu->arch.prodded = 1;
 		smp_mb();
 		if (vcpu->arch.ceded) {
-			if (waitqueue_active(&vcpu->wq)) {
-				wake_up_interruptible(&vcpu->wq);
+			if (swait_active(&vcpu->wq)) {
+				swake_up(&vcpu->wq);
 				vcpu->stat.halt_wakeup++;
 			}
 		}
@@ -1459,7 +1459,7 @@ static struct kvmppc_vcore *kvmppc_vcore_create(struct kvm *kvm, int core)
 	INIT_LIST_HEAD(&vcore->runnable_threads);
 	spin_lock_init(&vcore->lock);
 	spin_lock_init(&vcore->stoltb_lock);
-	init_waitqueue_head(&vcore->wq);
+	init_swait_queue_head(&vcore->wq);
 	vcore->preempt_tb = TB_NIL;
 	vcore->lpcr = kvm->arch.lpcr;
 	vcore->first_vcpuid = core * threads_per_subcore;
@@ -2531,10 +2531,9 @@ static void kvmppc_vcore_blocked(struct kvmppc_vcore *vc)
 {
 	struct kvm_vcpu *vcpu;
 	int do_sleep = 1;
+	DECLARE_SWAITQUEUE(wait);
 
-	DEFINE_WAIT(wait);
-
-	prepare_to_wait(&vc->wq, &wait, TASK_INTERRUPTIBLE);
+	prepare_to_swait(&vc->wq, &wait, TASK_INTERRUPTIBLE);
 
 	/*
 	 * Check one last time for pending exceptions and ceded state after
@@ -2548,7 +2547,7 @@ static void kvmppc_vcore_blocked(struct kvmppc_vcore *vc)
 	}
 
 	if (!do_sleep) {
-		finish_wait(&vc->wq, &wait);
+		finish_swait(&vc->wq, &wait);
 		return;
 	}
 
@@ -2556,7 +2555,7 @@ static void kvmppc_vcore_blocked(struct kvmppc_vcore *vc)
 	trace_kvmppc_vcore_blocked(vc, 0);
 	spin_unlock(&vc->lock);
 	schedule();
-	finish_wait(&vc->wq, &wait);
+	finish_swait(&vc->wq, &wait);
 	spin_lock(&vc->lock);
 	vc->vcore_state = VCORE_INACTIVE;
 	trace_kvmppc_vcore_blocked(vc, 1);
@@ -2612,7 +2611,7 @@ static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 			kvmppc_start_thread(vcpu, vc);
 			trace_kvm_guest_enter(vcpu);
 		} else if (vc->vcore_state == VCORE_SLEEPING) {
-			wake_up(&vc->wq);
+			swake_up(&vc->wq);
 		}
 
 	}