Merge branches 'arm/exynos', 'arm/omap', 'arm/rockchip', 'arm/mediatek', 'arm/smmu', 'arm/core', 'x86/vt-d', 'x86/amd' and 'core' into next

.mailmap

@@ -99,6 +99,8 @@ Linas Vepstas <linas@austin.ibm.com>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
 Mark Brown <broonie@sirena.org.uk>
+Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
+Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
 Matthieu CASTET <castet.matthieu@free.fr>
 Mauro Carvalho Chehab <mchehab@kernel.org> <mchehab@brturbo.com.br>
 Mauro Carvalho Chehab <mchehab@kernel.org> <maurochehab@gmail.com>
@@ -171,6 +173,7 @@ Vlad Dogaru <ddvlad@gmail.com> <vlad.dogaru@intel.com>
 Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
 Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
+Yakir Yang <kuankuan.y@gmail.com> <ykk@rock-chips.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>
 Gustavo Padovan <padovan@profusion.mobi>

Documentation/admin-guide/kernel-parameters.txt

@@ -1578,6 +1578,15 @@
 			extended tables themselves, and also PASID support. With
 			this option set, extended tables will not be used even
 			on hardware which claims to support them.
+		tboot_noforce [Default Off]
+			Do not force the Intel IOMMU enabled under tboot.
+			By default, tboot will force Intel IOMMU on, which
+			could harm performance of some high-throughput
+			devices like 40GBit network cards, even if identity
+			mapping is enabled.
+			Note that using this option lowers the security
+			provided by tboot because it makes the system
+			vulnerable to DMA attacks.
 
 	intel_idle.max_cstate=	[KNL,HW,ACPI,X86]
 			0	disables intel_idle and fall back on acpi_idle.
@@ -1644,6 +1653,12 @@
 		nobypass	[PPC/POWERNV]
 			Disable IOMMU bypass, using IOMMU for PCI devices.
 
+	iommu.passthrough=
+			[ARM64] Configure DMA to bypass the IOMMU by default.
+			Format: { "0" | "1" }
+			0 - Use IOMMU translation for DMA.
+			1 - Bypass the IOMMU for DMA.
+			unset - Use IOMMU translation for DMA.
 
 	io7=		[HW] IO7 for Marvel based alpha systems
 			See comment before marvel_specify_io7 in
@@ -1725,6 +1740,12 @@
 			kernel and module base offset ASLR (Address Space
 			Layout Randomization).
 
+	kasan_multi_shot
+			[KNL] Enforce KASAN (Kernel Address Sanitizer) to print
+			report on every invalid memory access. Without this
+			parameter KASAN will print report only for the first
+			invalid access.
+
 	keepinitrd	[HW,ARM]
 
 	kernelcore=	[KNL,X86,IA-64,PPC]

Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt

@@ -45,7 +45,7 @@ The following clocks are available:
    - 1 15	SATA
    - 1 16	SATA USB
    - 1 17	Main
-   - 1 18	SD/MMC
+   - 1 18	SD/MMC/GOP
    - 1 21	Slow IO (SPI, NOR, BootROM, I2C, UART)
    - 1 22	USB3H0
    - 1 23	USB3H1
@@ -65,7 +65,7 @@ Required properties:
 	"cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
 	"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
 	"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
-	"cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io",
+	"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
 	"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
 
 Example:
@@ -78,6 +78,6 @@ Example:
 		gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
 			"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
 			"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
-			"cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io",
+			"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
 			"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
 	};

Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt

@@ -4,7 +4,6 @@ Required properties:
   - compatible: value should be one of the following
 		"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
-		"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
 		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
 		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
 		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */

Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt

@@ -11,7 +11,6 @@ Required properties:
 		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
 		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
-		"samsung,exynos4415-fimd"; /* for Exynos4415 SoC */
 		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
 		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
 

Documentation/devicetree/bindings/iommu/arm,smmu.txt

@@ -60,6 +60,17 @@ conditions.
                   aliases of secure registers have to be used during
                   SMMU configuration.
 
+- stream-match-mask : For SMMUs supporting stream matching and using
+                  #iommu-cells = <1>, specifies a mask of bits to ignore
+		  when matching stream IDs (e.g. this may be programmed
+		  into the SMRn.MASK field of every stream match register
+		  used). For cases where it is desirable to ignore some
+                  portion of every Stream ID (e.g. for certain MMU-500
+                  configurations given globally unique input IDs). This
+                  property is not valid for SMMUs using stream indexing,
+                  or using stream matching with #iommu-cells = <2>, and
+                  may be ignored if present in such cases.
+
 ** Deprecated properties:
 
 - mmu-masters (deprecated in favour of the generic "iommus" binding) :
@@ -109,3 +120,20 @@ conditions.
         master3 {
                 iommus = <&smmu2 1 0x30>;
         };
+
+
+        /* ARM MMU-500 with 10-bit stream ID input configuration */
+        smmu3: iommu {
+                compatible = "arm,mmu-500", "arm,smmu-v2";
+                ...
+                #iommu-cells = <1>;
+                /* always ignore appended 5-bit TBU number */
+                stream-match-mask = 0x7c00;
+        };
+
+        bus {
+                /* bus whose child devices emit one unique 10-bit stream
+                   ID each, but may master through multiple SMMU TBUs */
+                iommu-map = <0 &smmu3 0 0x400>;
+                ...
+        };

Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt

@@ -13,7 +13,7 @@ Required Properties:
 	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
 							before RK3288
 	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
-	- "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK1108
+	- "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108
 	- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
 	- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
 	- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399

Documentation/devicetree/bindings/pci/hisilicon-pcie.txt

@@ -44,13 +44,19 @@ Hip05 Example (note that Hip06 is the same except compatible):
 	};
 
 HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
+
+Some BIOSes place the host controller in a mode where it is ECAM
+compliant for all devices other than the root complex. In such cases,
+the host controller should be described as below.
+
 The properties and their meanings are identical to those described in
 host-generic-pci.txt except as listed below.
 
 Properties of the host controller node that differ from
 host-generic-pci.txt:
 
-- compatible     : Must be "hisilicon,pcie-almost-ecam"
+- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
+		   "hisilicon,hip07-pcie-ecam"
 
 - reg            : Two entries: First the ECAM configuration space for any
 		   other bus underneath the root bus. Second, the base
@@ -59,7 +65,7 @@ host-generic-pci.txt:
 
 Example:
 	pcie0: pcie@a0090000 {
-		compatible = "hisilicon,pcie-almost-ecam";
+		compatible = "hisilicon,hip06-pcie-ecam";
 		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
 		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
 		bus-range = <0  31>;

Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt

@@ -1,39 +0,0 @@
-Broadcom USB3 phy binding for northstar plus SoC
-The USB3 phy is internal to the SoC and is accessed using mdio interface.
-
-Required mdio bus properties:
-- reg: Should be 0x0 for SoC internal USB3 phy
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Required USB3 PHY properties:
-- compatible: should be "brcm,nsp-usb3-phy"
-- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10.
-- usb3-ctrl-syscon: handler of syscon node defining physical address
-  of usb3 control register.
-- #phy-cells: must be 0
-
-Required usb3 control properties:
-- compatible: should be "brcm,nsp-usb3-ctrl"
-- reg: offset and length of the control registers
-
-Example:
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb3_phy: usb-phy@10 {
-			compatible = "brcm,nsp-usb3-phy";
-			reg = <0x10>;
-			usb3-ctrl-syscon = <&usb3_ctrl>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-	};
-
-	usb3_ctrl: syscon@104408 {
-		compatible = "brcm,nsp-usb3-ctrl", "syscon";
-		reg = <0x104408 0x3fc>;
-	};

Documentation/devicetree/bindings/rng/omap_rng.txt

@@ -12,7 +12,8 @@ Required properties:
 - reg : Offset and length of the register set for the module
 - interrupts : the interrupt number for the RNG module.
 		Used for "ti,omap4-rng" and "inside-secure,safexcel-eip76"
-- clocks: the trng clock source
+- clocks: the trng clock source. Only mandatory for the
+  "inside-secure,safexcel-eip76" compatible.
 
 Example:
 /* AM335x */

Documentation/extcon/intel-int3496.txt

@@ -20,3 +20,8 @@ Index 1: The output gpio for enabling Vbus output from the device to the otg
 Index 2: The output gpio for muxing of the data pins between the USB host and
          the USB peripheral controller, write 1 to mux to the peripheral
          controller
+
+There is a mapping between indices and GPIO connection IDs as follows
+	id	index 0
+	vbus	index 1
+	mux	index 2

Documentation/filesystems/Locking

@@ -58,8 +58,7 @@ prototypes:
 	int (*permission) (struct inode *, int, unsigned int);
 	int (*get_acl)(struct inode *, int);
 	int (*setattr) (struct dentry *, struct iattr *);
-	int (*getattr) (const struct path *, struct dentry *, struct kstat *,
-			u32, unsigned int);
+	int (*getattr) (const struct path *, struct kstat *, u32, unsigned int);
 	ssize_t (*listxattr) (struct dentry *, char *, size_t);
 	int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len);
 	void (*update_time)(struct inode *, struct timespec *, int);

Documentation/filesystems/porting

@@ -600,3 +600,9 @@ in your dentry operations instead.
 [recommended]
 	->readlink is optional for symlinks.  Don't set, unless filesystem needs
 	to fake something for readlink(2).
+--
+[mandatory]
+	->getattr() is now passed a struct path rather than a vfsmount and
+	dentry separately, and it now has request_mask and query_flags arguments
+	to specify the fields and sync type requested by statx.  Filesystems not
+	supporting any statx-specific features may ignore the new arguments.

Documentation/filesystems/vfs.txt

@@ -382,8 +382,7 @@ struct inode_operations {
 	int (*permission) (struct inode *, int);
 	int (*get_acl)(struct inode *, int);
 	int (*setattr) (struct dentry *, struct iattr *);
-	int (*getattr) (const struct path *, struct dentry *, struct kstat *,
-			u32, unsigned int);
+	int (*getattr) (const struct path *, struct kstat *, u32, unsigned int);
 	ssize_t (*listxattr) (struct dentry *, char *, size_t);
 	void (*update_time)(struct inode *, struct timespec *, int);
 	int (*atomic_open)(struct inode *, struct dentry *, struct file *,

Documentation/gcc-plugins.txt

@@ -18,8 +18,8 @@ because gcc versions 4.5 and 4.6 are compiled by a C compiler,
 gcc-4.7 can be compiled by a C or a C++ compiler,
 and versions 4.8+ can only be compiled by a C++ compiler.
 
-Currently the GCC plugin infrastructure supports only the x86, arm and arm64
-architectures.
+Currently the GCC plugin infrastructure supports only the x86, arm, arm64 and
+powerpc architectures.
 
 This infrastructure was ported from grsecurity [6] and PaX [7].
 

Documentation/pinctrl.txt

@@ -77,9 +77,15 @@ static struct pinctrl_desc foo_desc = {
 
 int __init foo_probe(void)
 {
+	int error;
+
 	struct pinctrl_dev *pctl;
 
-	return pinctrl_register_and_init(&foo_desc, <PARENT>, NULL, &pctl);
+	error = pinctrl_register_and_init(&foo_desc, <PARENT>, NULL, &pctl);
+	if (error)
+		return error;
+
+	return pinctrl_enable(pctl);
 }
 
 To enable the pinctrl subsystem and the subgroups for PINMUX and PINCONF and

Documentation/process/stable-kernel-rules.rst

@@ -124,7 +124,7 @@ specified in the following format in the sign-off area:
 
 .. code-block:: none
 
-     Cc: <stable@vger.kernel.org> # 3.3.x-
+     Cc: <stable@vger.kernel.org> # 3.3.x
 
 The tag has the meaning of:
 

Documentation/virtual/kvm/api.txt

@@ -3377,6 +3377,69 @@ struct kvm_ppc_resize_hpt {
 	__u32 pad;
 };
 
+4.104 KVM_X86_GET_MCE_CAP_SUPPORTED
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: system ioctl
+Parameters: u64 mce_cap (out)
+Returns: 0 on success, -1 on error
+
+Returns supported MCE capabilities. The u64 mce_cap parameter
+has the same format as the MSR_IA32_MCG_CAP register. Supported
+capabilities will have the corresponding bits set.
+
+4.105 KVM_X86_SETUP_MCE
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: u64 mcg_cap (in)
+Returns: 0 on success,
+         -EFAULT if u64 mcg_cap cannot be read,
+         -EINVAL if the requested number of banks is invalid,
+         -EINVAL if requested MCE capability is not supported.
+
+Initializes MCE support for use. The u64 mcg_cap parameter
+has the same format as the MSR_IA32_MCG_CAP register and
+specifies which capabilities should be enabled. The maximum
+supported number of error-reporting banks can be retrieved when
+checking for KVM_CAP_MCE. The supported capabilities can be
+retrieved with KVM_X86_GET_MCE_CAP_SUPPORTED.
+
+4.106 KVM_X86_SET_MCE
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_x86_mce (in)
+Returns: 0 on success,
+         -EFAULT if struct kvm_x86_mce cannot be read,
+         -EINVAL if the bank number is invalid,
+         -EINVAL if VAL bit is not set in status field.
+
+Inject a machine check error (MCE) into the guest. The input
+parameter is:
+
+struct kvm_x86_mce {
+	__u64 status;
+	__u64 addr;
+	__u64 misc;
+	__u64 mcg_status;
+	__u8 bank;
+	__u8 pad1[7];
+	__u64 pad2[3];
+};
+
+If the MCE being reported is an uncorrected error, KVM will
+inject it as an MCE exception into the guest. If the guest
+MCG_STATUS register reports that an MCE is in progress, KVM
+causes an KVM_EXIT_SHUTDOWN vmexit.
+
+Otherwise, if the MCE is a corrected error, KVM will just
+store it in the corresponding bank (provided this bank is
+not holding a previously reported uncorrected error).
+
 5. The kvm_run structure
 ------------------------
 

Documentation/virtual/kvm/devices/arm-vgic.txt

@@ -83,6 +83,12 @@ Groups:
 
     Bits for undefined preemption levels are RAZ/WI.
 
+    For historical reasons and to provide ABI compatibility with userspace we
+    export the GICC_PMR register in the format of the GICH_VMCR.VMPriMask
+    field in the lower 5 bits of a word, meaning that userspace must always
+    use the lower 5 bits to communicate with the KVM device and must shift the
+    value left by 3 places to obtain the actual priority mask level.
+
   Limitations:
     - Priorities are not implemented, and registers are RAZ/WI
     - Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2.

MAINTAINERS

@@ -2585,12 +2585,26 @@ F:	include/uapi/linux/if_bonding.h
 
 BPF (Safe dynamic programs and tools)
 M:	Alexei Starovoitov <ast@kernel.org>
+M:	Daniel Borkmann <daniel@iogearbox.net>
 L:	netdev@vger.kernel.org
 L:	linux-kernel@vger.kernel.org
 S:	Supported
+F:	arch/x86/net/bpf_jit*
+F:	Documentation/networking/filter.txt
+F:	include/linux/bpf*
+F:	include/linux/filter.h
+F:	include/uapi/linux/bpf*
+F:	include/uapi/linux/filter.h
 F:	kernel/bpf/
-F:	tools/testing/selftests/bpf/
+F:	kernel/trace/bpf_trace.c
 F:	lib/test_bpf.c
+F:	net/bpf/
+F:	net/core/filter.c
+F:	net/sched/act_bpf.c
+F:	net/sched/cls_bpf.c
+F:	samples/bpf/
+F:	tools/net/bpf*
+F:	tools/testing/selftests/bpf/
 
 BROADCOM B44 10/100 ETHERNET DRIVER
 M:	Michael Chan <michael.chan@broadcom.com>
@@ -3216,7 +3230,6 @@ F:	drivers/platform/chrome/
 
 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
-M:	Sujith Sankar <ssujith@cisco.com>
 M:	Govindarajulu Varadarajan <_govind@gmx.com>
 M:	Neel Patel <neepatel@cisco.com>
 S:	Supported
@@ -4118,14 +4131,13 @@ F:	drivers/block/drbd/
 F:	lib/lru_cache.c
 F:	Documentation/blockdev/drbd/
 
-DRIVER CORE, KOBJECTS, DEBUGFS, KERNFS AND SYSFS
+DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
 S:	Supported
 F:	Documentation/kobject.txt
 F:	drivers/base/
 F:	fs/debugfs/
-F:	fs/kernfs/
 F:	fs/sysfs/
 F:	include/linux/debugfs.h
 F:	include/linux/kobj*
@@ -4776,6 +4788,12 @@ L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/mpc85xx_edac.[ch]
 
+EDAC-PND2
+M:	Tony Luck <tony.luck@intel.com>
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	drivers/edac/pnd2_edac.[ch]
+
 EDAC-PASEMI
 M:	Egor Martovetsky <egor@pasemi.com>
 L:	linux-edac@vger.kernel.org
@@ -4923,6 +4941,7 @@ F:	include/linux/netfilter_bridge/
 F:	net/bridge/
 
 ETHERNET PHY LIBRARY
+M:	Andrew Lunn <andrew@lunn.ch>
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
@@ -6764,6 +6783,8 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/iommu/
 F:	drivers/iommu/
+F:	include/linux/iommu.h
+F:	include/linux/iova.h
 
 IP MASQUERADING
 M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
@@ -7084,9 +7105,9 @@ S:	Maintained
 F:	fs/autofs4/
 
 KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
+M:	Masahiro Yamada <yamada.masahiro@socionext.com>
 M:	Michal Marek <mmarek@suse.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git for-next
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git rc-fixes
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git
 L:	linux-kbuild@vger.kernel.org
 S:	Maintained
 F:	Documentation/kbuild/
@@ -7203,6 +7224,14 @@ F:	arch/mips/include/uapi/asm/kvm*
 F:	arch/mips/include/asm/kvm*
 F:	arch/mips/kvm/
 
+KERNFS
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+M:	Tejun Heo <tj@kernel.org>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
+S:	Supported
+F:	include/linux/kernfs.h
+F:	fs/kernfs/
+
 KEXEC
 M:	Eric Biederman <ebiederm@xmission.com>
 W:	http://kernel.org/pub/linux/utils/kernel/kexec/
@@ -7774,13 +7803,6 @@ F:	include/net/mac80211.h
 F:	net/mac80211/
 F:	drivers/net/wireless/mac80211_hwsim.[ch]
 
-MACVLAN DRIVER
-M:	Patrick McHardy <kaber@trash.net>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/macvlan.c
-F:	include/linux/if_macvlan.h
-
 MAILBOX API
 M:	Jassi Brar <jassisinghbrar@gmail.com>
 L:	linux-kernel@vger.kernel.org
@@ -7853,6 +7875,8 @@ F:	drivers/net/ethernet/marvell/mvneta.*
 MARVELL MWIFIEX WIRELESS DRIVER
 M:	Amitkumar Karwar <akarwar@marvell.com>
 M:	Nishant Sarmukadam <nishants@marvell.com>
+M:	Ganapathi Bhat <gbhat@marvell.com>
+M:	Xinming Hu <huxm@marvell.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/marvell/mwifiex/
@@ -8753,6 +8777,7 @@ W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
+B:	mailto:netdev@vger.kernel.org
 S:	Maintained
 F:	net/
 F:	include/net/
@@ -10814,6 +10839,7 @@ F:	drivers/s390/block/dasd*
 F:	block/partitions/ibm.c
 
 S390 NETWORK DRIVERS
+M:	Julian Wiedmann <jwi@linux.vnet.ibm.com>
 M:	Ursula Braun <ubraun@linux.vnet.ibm.com>
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -10844,6 +10870,7 @@ S:	Supported
 F:	drivers/s390/scsi/zfcp_*
 
 S390 IUCV NETWORK LAYER
+M:	Julian Wiedmann <jwi@linux.vnet.ibm.com>
 M:	Ursula Braun <ubraun@linux.vnet.ibm.com>
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -12454,7 +12481,6 @@ F:	drivers/clk/ti/
 F:	include/linux/clk/ti.h
 
 TI ETHERNET SWITCH DRIVER (CPSW)
-M:	Mugunthan V N <mugunthanvnm@ti.com>
 R:	Grygorii Strashko <grygorii.strashko@ti.com>
 L:	linux-omap@vger.kernel.org
 L:	netdev@vger.kernel.org
@@ -13295,7 +13321,7 @@ F:	drivers/virtio/
 F:	tools/virtio/
 F:	drivers/net/virtio_net.c
 F:	drivers/block/virtio_blk.c
-F:	include/linux/virtio_*.h
+F:	include/linux/virtio*.h
 F:	include/uapi/linux/virtio_*.h
 F:	drivers/crypto/virtio/
 
@@ -13383,14 +13409,6 @@ W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/platform/vivid/*
 
-VLAN (802.1Q)
-M:	Patrick McHardy <kaber@trash.net>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/macvlan.c
-F:	include/linux/if_*vlan.h
-F:	net/8021q/
-
 VLYNQ BUS
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	openwrt-devel@lists.openwrt.org (subscribers-only)

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc8
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -372,7 +372,7 @@ LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 AFLAGS_KERNEL	=
 LDFLAGS_vmlinux =
-CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage -fno-tree-loop-im -Wno-maybe-uninitialized
+CFLAGS_GCOV	:= -fprofile-arcs -ftest-coverage -fno-tree-loop-im $(call cc-disable-warning,maybe-uninitialized,)
 CFLAGS_KCOV	:= $(call cc-option,-fsanitize-coverage=trace-pc,)
 
 
@@ -653,6 +653,12 @@ KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \
 # Tell gcc to never replace conditional load with a non-conditional one
 KBUILD_CFLAGS	+= $(call cc-option,--param=allow-store-data-races=0)
 
+# check for 'asm goto'
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
+	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
+	KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
+endif
+
 include scripts/Makefile.gcc-plugins
 
 ifdef CONFIG_READABLE_ASM
@@ -798,12 +804,6 @@ KBUILD_CFLAGS   += $(call cc-option,-Werror=incompatible-pointer-types)
 # use the deterministic mode of AR if available
 KBUILD_ARFLAGS := $(call ar-option,D)
 
-# check for 'asm goto'
-ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
-	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
-	KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
-endif
-
 include scripts/Makefile.kasan
 include scripts/Makefile.extrawarn
 include scripts/Makefile.ubsan

arch/alpha/kernel/osf_sys.c

@@ -1290,7 +1290,7 @@ SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
 	/* copy relevant bits of struct timex. */
 	if (copy_from_user(&txc, txc_p, offsetof(struct timex32, time)) ||
 	    copy_from_user(&txc.tick, &txc_p->tick, sizeof(struct timex32) - 
-			   offsetof(struct timex32, time)))
+			   offsetof(struct timex32, tick)))
 	  return -EFAULT;
 
 	ret = do_adjtimex(&txc);	

arch/arc/boot/dts/skeleton.dtsi

@@ -26,6 +26,7 @@
 			device_type = "cpu";
 			compatible = "snps,arc770d";
 			reg = <0>;
+			clocks = <&core_clk>;
 		};
 	};
 

arch/arc/boot/dts/skeleton_hs.dtsi

@@ -21,6 +21,7 @@
 			device_type = "cpu";
 			compatible = "snps,archs38";
 			reg = <0>;
+			clocks = <&core_clk>;
 		};
 	};
 

arch/arc/boot/dts/skeleton_hs_idu.dtsi

@@ -19,8 +19,27 @@
 
 		cpu@0 {
 			device_type = "cpu";
-			compatible = "snps,archs38xN";
+			compatible = "snps,archs38";
 			reg = <0>;
+			clocks = <&core_clk>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <1>;
+			clocks = <&core_clk>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <2>;
+			clocks = <&core_clk>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <3>;
+			clocks = <&core_clk>;
 		};
 	};
 

arch/arc/boot/dts/vdk_axs10x_mb.dtsi

@@ -112,13 +112,19 @@
 			interrupts = <7>;
 			bus-width = <4>;
 		};
+	};
 
-		/* Embedded Vision subsystem UIO mappings; only relevant for EV VDK */
-		uio_ev: uio@0xD0000000 {
-			compatible = "generic-uio";
-			reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
-			reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
-			interrupts = <23>;
-		};
+	/*
+	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
+	 *
+	 * This node is intentionally put outside of MB above becase
+	 * it maps areas outside of MB's 0xEz-0xFz.
+	 */
+	uio_ev: uio@0xD0000000 {
+		compatible = "generic-uio";
+		reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
+		reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
+		interrupt-parent = <&mb_intc>;
+		interrupts = <23>;
 	};
 };

arch/arc/include/asm/kprobes.h

@@ -54,9 +54,7 @@ int kprobe_fault_handler(struct pt_regs *regs, unsigned long cause);
 void kretprobe_trampoline(void);
 void trap_is_kprobe(unsigned long address, struct pt_regs *regs);
 #else
-static void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
-{
-}
+#define trap_is_kprobe(address, regs)
 #endif /* CONFIG_KPROBES */
 
 #endif /* _ARC_KPROBES_H */

arch/arc/kernel/entry-arcv2.S

@@ -100,15 +100,21 @@ END(handle_interrupt)
 ;################### Non TLB Exception Handling #############################
 
 ENTRY(EV_SWI)
-	flag 1
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
 END(EV_SWI)
 
 ENTRY(EV_DivZero)
-	flag 1
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
 END(EV_DivZero)
 
 ENTRY(EV_DCError)
-	flag 1
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
 END(EV_DCError)
 
 ; ---------------------------------------------

arch/arc/kernel/setup.c

@@ -10,6 +10,7 @@
 #include <linux/fs.h>
 #include <linux/delay.h>
 #include <linux/root_dev.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/console.h>
@@ -488,8 +489,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	char *str;
 	int cpu_id = ptr_to_cpu(v);
-	struct device_node *core_clk = of_find_node_by_name(NULL, "core_clk");
-	u32 freq = 0;
+	struct device *cpu_dev = get_cpu_device(cpu_id);
+	struct clk *cpu_clk;
+	unsigned long freq = 0;
 
 	if (!cpu_online(cpu_id)) {
 		seq_printf(m, "processor [%d]\t: Offline\n", cpu_id);
@@ -502,9 +504,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE));
 
-	of_property_read_u32(core_clk, "clock-frequency", &freq);
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk)) {
+		seq_printf(m, "CPU speed \t: Cannot get clock for processor [%d]\n",
+			   cpu_id);
+	} else {
+		freq = clk_get_rate(cpu_clk);
+	}
 	if (freq)
-		seq_printf(m, "CPU speed\t: %u.%02u Mhz\n",
+		seq_printf(m, "CPU speed\t: %lu.%02lu Mhz\n",
 			   freq / 1000000, (freq / 10000) % 100);
 
 	seq_printf(m, "Bogo MIPS\t: %lu.%02lu\n",

arch/arc/mm/cache.c

@@ -633,6 +633,9 @@ noinline static void slc_entire_op(const int op)
 
 	write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
 
+	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
+	read_aux_reg(r);
+
 	/* Important to wait for flush to complete */
 	while (read_aux_reg(r) & SLC_CTRL_BUSY);
 }

arch/arm/boot/dts/am335x-baltos.dtsi

@@ -371,6 +371,8 @@
 
 	phy1: ethernet-phy@1 {
 		reg = <7>;
+		eee-broken-100tx;
+		eee-broken-1000t;
 	};
 };
 

arch/arm/boot/dts/am335x-evmsk.dts

@@ -672,6 +672,7 @@
 	ti,non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 

arch/arm/boot/dts/am335x-pcm-953.dtsi

@@ -63,14 +63,14 @@
 			label = "home";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		button@1 {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 	};

arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -315,6 +315,13 @@
 			/* ID & VBUS GPIOs provided in board dts */
 		};
 	};
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
 &mcspi3 {
@@ -330,13 +337,6 @@
 		spi-max-frequency = <1000000>;
 		spi-cpol;
 	};
-
-	tpic2810: tpic2810@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
 };
 
 &uart3 {

arch/arm/boot/dts/bcm5301x.dtsi

@@ -66,14 +66,14 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
 		local-timer@20600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x100>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 

arch/arm/boot/dts/bcm953012k.dts

@@ -48,15 +48,14 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x10000000>;
+		reg = <0x80000000 0x10000000>;
 	};
 };
 
 &uart0 {
-	clock-frequency = <62499840>;
+	status = "okay";
 };
 
 &uart1 {
-	clock-frequency = <62499840>;
 	status = "okay";
 };

arch/arm/boot/dts/bcm958522er.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958525er.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958525xmc.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958622hr.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958623hr.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958625hr.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm988312hr.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/dra7.dtsi

@@ -283,6 +283,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				linux,pci-domain = <0>;
@@ -319,6 +320,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				linux,pci-domain = <1>;

arch/arm/boot/dts/imx6sx-udoo-neo.dtsi

@@ -121,11 +121,6 @@
 	};
 };
 
-&cpu0 {
-	arm-supply = <&sw1a_reg>;
-	soc-supply = <&sw1c_reg>;
-};
-
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -121,7 +121,7 @@
 &i2c3 {
 	clock-frequency = <400000>;
 	at24@50 {
-		compatible = "at24,24c02";
+		compatible = "atmel,24c64";
 		readonly;
 		reg = <0x50>;
 	};

arch/arm/boot/dts/sama5d2.dtsi

@@ -266,7 +266,7 @@
 		};
 
 		usb1: ohci@00400000 {
-			compatible = "atmel,sama5d2-ohci", "usb-ohci";
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00400000 0x100000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
 			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -14,6 +14,7 @@
 #include <dt-bindings/mfd/dbx500-prcmu.h>
 #include <dt-bindings/arm/ux500_pm_domains.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ste-ab8500.h>
 #include "skeleton.dtsi"
 
 / {
@@ -603,6 +604,11 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
+				ab8500_clock: clock-controller {
+					compatible = "stericsson,ab8500-clk";
+					#clock-cells = <1>;
+				};
+
 				ab8500_gpio: ab8500-gpio {
 					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
@@ -686,6 +692,8 @@
 
 				ab8500-pwm {
 					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
 				};
 
 				ab8500-debugfs {
@@ -700,6 +708,9 @@
 					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
 					V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
 
+					clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+					clock-names = "audioclk";
+
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
@@ -1095,6 +1106,14 @@
 			status = "disabled";
 		};
 
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+			clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+			clock-names = "sysclk", "ulpclk", "intclk";
+		};
+
 		msp0: msp@80123000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80123000 0x1000>;

arch/arm/boot/dts/ste-href.dtsi

@@ -186,15 +186,6 @@
 			status = "okay";
 		};
 
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-			clocks = <&prcmu_clk PRCMU_SYSCLK>;
-			clock-names = "sysclk";
-		};
-
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp0_default_mode>;

arch/arm/boot/dts/ste-snowball.dts

@@ -159,15 +159,6 @@
 				     "", "", "", "", "", "", "", "";
 		};
 
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-			clocks = <&prcmu_clk PRCMU_SYSCLK>;
-			clock-names = "sysclk";
-		};
-
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp0_default_mode>;

arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts

@@ -167,7 +167,7 @@
 					reg = <8>;
 					label = "cpu";
 					ethernet = <&gmac>;
-					phy-mode = "rgmii";
+					phy-mode = "rgmii-txid";
 					fixed-link {
 						speed = <1000>;
 						full-duplex;

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -495,7 +495,7 @@
 			resets = <&ccu RST_BUS_GPU>;
 
 			assigned-clocks = <&ccu CLK_GPU>;
-			assigned-clock-rates = <408000000>;
+			assigned-clock-rates = <384000000>;
 		};
 
 		gic: interrupt-controller@01c81000 {

arch/arm/boot/dts/sun8i-a33.dtsi

@@ -66,12 +66,6 @@
 			opp-microvolt = <1200000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
-
-		opp@1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1320000>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
-		};
 	};
 
 	cpus {
@@ -81,16 +75,22 @@
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
+		cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
 		cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 	};
 
@@ -113,8 +113,8 @@
 		simple-audio-card,mclk-fs = <512>;
 		simple-audio-card,aux-devs = <&codec_analog>;
 		simple-audio-card,routing =
-			"Left DAC", "Digital Left DAC",
-			"Right DAC", "Digital Right DAC";
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right";
 		status = "disabled";
 
 		simple-audio-card,cpu {

arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi

@@ -50,8 +50,6 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin>;
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
@@ -93,11 +91,6 @@
 };
 
 &pio {
-	bl_en_pin: bl_en_pin@0 {
-		pins = "PH6";
-		function = "gpio_in";
-	};
-
 	mmc0_cd_pin: mmc0_cd_pin@0 {
 		pins = "PB4";
 		function = "gpio_in";

arch/arm/configs/omap2plus_defconfig

@@ -188,6 +188,7 @@ CONFIG_WL12XX=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SPI=m
 CONFIG_WLCORE_SDIO=m
+CONFIG_INPUT_MOUSEDEV=m
 CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_EVDEV=m
 CONFIG_KEYBOARD_ATKBD=m

arch/arm/kvm/arm.c

@@ -1124,6 +1124,9 @@ static void cpu_hyp_reinit(void)
 		if (__hyp_get_vectors() == hyp_default_vectors)
 			cpu_init_hyp_mode(NULL);
 	}
+
+	if (vgic_present)
+		kvm_vgic_init_cpu_hardware();
 }
 
 static void cpu_hyp_reset(void)

arch/arm/kvm/mmu.c

@@ -292,11 +292,18 @@ static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size)
 	phys_addr_t addr = start, end = start + size;
 	phys_addr_t next;
 
+	assert_spin_locked(&kvm->mmu_lock);
 	pgd = kvm->arch.pgd + stage2_pgd_index(addr);
 	do {
 		next = stage2_pgd_addr_end(addr, end);
 		if (!stage2_pgd_none(*pgd))
 			unmap_stage2_puds(kvm, pgd, addr, next);
+		/*
+		 * If the range is too large, release the kvm->mmu_lock
+		 * to prevent starvation and lockup detector warnings.
+		 */
+		if (next != end)
+			cond_resched_lock(&kvm->mmu_lock);
 	} while (pgd++, addr = next, addr != end);
 }
 
@@ -803,6 +810,7 @@ void stage2_unmap_vm(struct kvm *kvm)
 	int idx;
 
 	idx = srcu_read_lock(&kvm->srcu);
+	down_read(&current->mm->mmap_sem);
 	spin_lock(&kvm->mmu_lock);
 
 	slots = kvm_memslots(kvm);
@@ -810,6 +818,7 @@ void stage2_unmap_vm(struct kvm *kvm)
 		stage2_unmap_memslot(kvm, memslot);
 
 	spin_unlock(&kvm->mmu_lock);
+	up_read(&current->mm->mmap_sem);
 	srcu_read_unlock(&kvm->srcu, idx);
 }
 
@@ -829,7 +838,10 @@ void kvm_free_stage2_pgd(struct kvm *kvm)
 	if (kvm->arch.pgd == NULL)
 		return;
 
+	spin_lock(&kvm->mmu_lock);
 	unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE);
+	spin_unlock(&kvm->mmu_lock);
+
 	/* Free the HW pgd, one page at a time */
 	free_pages_exact(kvm->arch.pgd, S2_PGD_SIZE);
 	kvm->arch.pgd = NULL;
@@ -1801,6 +1813,7 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 	    (KVM_PHYS_SIZE >> PAGE_SHIFT))
 		return -EFAULT;
 
+	down_read(&current->mm->mmap_sem);
 	/*
 	 * A memory region could potentially cover multiple VMAs, and any holes
 	 * between them, so iterate over all of them to find out if we can map
@@ -1844,8 +1857,10 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 			pa += vm_start - vma->vm_start;
 
 			/* IO region dirty page logging not allowed */
-			if (memslot->flags & KVM_MEM_LOG_DIRTY_PAGES)
-				return -EINVAL;
+			if (memslot->flags & KVM_MEM_LOG_DIRTY_PAGES) {
+				ret = -EINVAL;
+				goto out;
+			}
 
 			ret = kvm_phys_addr_ioremap(kvm, gpa, pa,
 						    vm_end - vm_start,
@@ -1857,7 +1872,7 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 	} while (hva < reg_end);
 
 	if (change == KVM_MR_FLAGS_ONLY)
-		return ret;
+		goto out;
 
 	spin_lock(&kvm->mmu_lock);
 	if (ret)
@@ -1865,6 +1880,8 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 	else
 		stage2_flush_memslot(kvm, memslot);
 	spin_unlock(&kvm->mmu_lock);
+out:
+	up_read(&current->mm->mmap_sem);
 	return ret;
 }
 

arch/arm/mach-at91/pm.c

@@ -289,6 +289,22 @@ static void at91_ddr_standby(void)
 		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
+static void sama5d3_ddr_standby(void)
+{
+	u32 lpr0;
+	u32 saved_lpr0;
+
+	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+	lpr0 |= AT91_DDRSDRC_LPCB_POWER_DOWN;
+
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+
+	cpu_do_idle();
+
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
+}
+
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
@@ -323,7 +339,7 @@ static const struct of_device_id const ramc_ids[] __initconst = {
 	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
-	{ .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby },
+	{ .compatible = "atmel,sama5d3-ddramc", .data = sama5d3_ddr_standby },
 	{ /*sentinel*/ }
 };
 

arch/arm/mach-omap2/Makefile

@@ -241,6 +241,3 @@ obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
-
-nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
-obj-y					+= $(nand-m) $(nand-y)

arch/arm/mach-omap2/common.h

@@ -270,6 +270,7 @@ extern const struct smp_operations omap4_smp_ops;
 extern int omap4_mpuss_init(void);
 extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
 extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
+extern u32 omap4_get_cpu1_ns_pa_addr(void);
 #else
 static inline int omap4_enter_lowpower(unsigned int cpu,
 					unsigned int power_state)

arch/arm/mach-omap2/gpmc-nand.c

@@ -1,154 +0,0 @@
-/*
- * gpmc-nand.c
- *
- * Copyright (C) 2009 Texas Instruments
- * Vimal Singh <vimalsingh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/omap-gpmc.h>
-#include <linux/mtd/nand.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#include <asm/mach/flash.h>
-
-#include "soc.h"
-
-/* minimum size for IO mapping */
-#define	NAND_IO_SIZE	4
-
-static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
-{
-	/* platforms which support all ECC schemes */
-	if (soc_is_am33xx() || soc_is_am43xx() || cpu_is_omap44xx() ||
-		 soc_is_omap54xx() || soc_is_dra7xx())
-		return 1;
-
-	if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW ||
-		 ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) {
-		if (cpu_is_omap24xx())
-			return 0;
-		else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0))
-			return 0;
-		else
-			return 1;
-	}
-
-	/* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
-	 * which require H/W based ECC error detection */
-	if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
-	    ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
-		 (ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
-		return 0;
-
-	/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
-	if (ecc_opt == OMAP_ECC_HAM1_CODE_HW ||
-	    ecc_opt == OMAP_ECC_HAM1_CODE_SW)
-		return 1;
-	else
-		return 0;
-}
-
-/* This function will go away once the device-tree convertion is complete */
-static void gpmc_set_legacy(struct omap_nand_platform_data *gpmc_nand_data,
-			    struct gpmc_settings *s)
-{
-	/* Enable RD PIN Monitoring Reg */
-	if (gpmc_nand_data->dev_ready) {
-		s->wait_on_read = true;
-		s->wait_on_write = true;
-	}
-
-	if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
-		s->device_width = GPMC_DEVWIDTH_16BIT;
-	else
-		s->device_width = GPMC_DEVWIDTH_8BIT;
-}
-
-int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
-		   struct gpmc_timings *gpmc_t)
-{
-	int err	= 0;
-	struct gpmc_settings s;
-	struct platform_device *pdev;
-	struct resource gpmc_nand_res[] = {
-		{ .flags = IORESOURCE_MEM, },
-		{ .flags = IORESOURCE_IRQ, },
-		{ .flags = IORESOURCE_IRQ, },
-	};
-
-	BUG_ON(gpmc_nand_data->cs >= GPMC_CS_NUM);
-
-	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
-			      (unsigned long *)&gpmc_nand_res[0].start);
-	if (err < 0) {
-		pr_err("omap2-gpmc: Cannot request GPMC CS %d, error %d\n",
-		       gpmc_nand_data->cs, err);
-		return err;
-	}
-	gpmc_nand_res[0].end = gpmc_nand_res[0].start + NAND_IO_SIZE - 1;
-	gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
-	gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
-
-	memset(&s, 0, sizeof(struct gpmc_settings));
-	gpmc_set_legacy(gpmc_nand_data, &s);
-
-	s.device_nand = true;
-
-	if (gpmc_t) {
-		err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t, &s);
-		if (err < 0) {
-			pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n",
-			       err);
-			return err;
-		}
-	}
-
-	err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
-	if (err < 0)
-		goto out_free_cs;
-
-	err = gpmc_configure(GPMC_CONFIG_WP, 0);
-	if (err < 0)
-		goto out_free_cs;
-
-	if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
-		pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n");
-		err = -EINVAL;
-		goto out_free_cs;
-	}
-
-
-	pdev = platform_device_alloc("omap2-nand", gpmc_nand_data->cs);
-	if (pdev) {
-		err = platform_device_add_resources(pdev, gpmc_nand_res,
-						    ARRAY_SIZE(gpmc_nand_res));
-		if (!err)
-			pdev->dev.platform_data = gpmc_nand_data;
-	} else {
-		err = -ENOMEM;
-	}
-	if (err)
-		goto out_free_pdev;
-
-	err = platform_device_add(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "Unable to register NAND device\n");
-		goto out_free_pdev;
-	}
-
-	return 0;
-
-out_free_pdev:
-	platform_device_put(pdev);
-out_free_cs:
-	gpmc_cs_free(gpmc_nand_data->cs);
-
-	return err;
-}

arch/arm/mach-omap2/gpmc-onenand.c

@@ -367,7 +367,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 	return ret;
 }
 
-void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+int gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 {
 	int err;
 	struct device *dev = &gpmc_onenand_device.dev;
@@ -393,15 +393,17 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 	if (err < 0) {
 		dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
 			gpmc_onenand_data->cs, err);
-		return;
+		return err;
 	}
 
 	gpmc_onenand_resource.end = gpmc_onenand_resource.start +
 							ONENAND_IO_SIZE - 1;
 
-	if (platform_device_register(&gpmc_onenand_device) < 0) {
+	err = platform_device_register(&gpmc_onenand_device);
+	if (err) {
 		dev_err(dev, "Unable to register OneNAND device\n");
 		gpmc_cs_free(gpmc_onenand_data->cs);
-		return;
 	}
+
+	return err;
 }

arch/arm/mach-omap2/omap-headsmp.S

@@ -17,6 +17,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/assembler.h>
 
 #include "omap44xx.h"
 
@@ -66,7 +67,7 @@ wait_2:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	cmp	r0, r4
 	bne	wait_2
 	ldr	r12, =API_HYP_ENTRY
-	adr	r0, hyp_boot
+	badr	r0, hyp_boot
 	smc	#0
 hyp_boot:
 	b	omap_secondary_startup

arch/arm/mach-omap2/omap-hotplug.c

@@ -50,7 +50,7 @@ void omap4_cpu_die(unsigned int cpu)
 		omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
 
 		if (omap_secure_apis_support())
-			boot_cpu = omap_read_auxcoreboot0();
+			boot_cpu = omap_read_auxcoreboot0() >> 9;
 		else
 			boot_cpu =
 				readl_relaxed(base + OMAP_AUX_CORE_BOOT_0) >> 5;

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -64,6 +64,7 @@
 #include "prm-regbits-44xx.h"
 
 static void __iomem *sar_base;
+static u32 old_cpu1_ns_pa_addr;
 
 #if defined(CONFIG_PM) && defined(CONFIG_SMP)
 
@@ -212,6 +213,11 @@ static void __init save_l2x0_context(void)
 {}
 #endif
 
+u32 omap4_get_cpu1_ns_pa_addr(void)
+{
+	return old_cpu1_ns_pa_addr;
+}
+
 /**
  * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
  * The purpose of this function is to manage low power programming
@@ -460,22 +466,30 @@ int __init omap4_mpuss_init(void)
 void __init omap4_mpuss_early_init(void)
 {
 	unsigned long startup_pa;
+	void __iomem *ns_pa_addr;
 
-	if (!(cpu_is_omap44xx() || soc_is_omap54xx()))
+	if (!(soc_is_omap44xx() || soc_is_omap54xx()))
 		return;
 
 	sar_base = omap4_get_sar_ram_base();
 
-	if (cpu_is_omap443x())
+	/* Save old NS_PA_ADDR for validity checks later on */
+	if (soc_is_omap44xx())
+		ns_pa_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+	else
+		ns_pa_addr = sar_base + OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+	old_cpu1_ns_pa_addr = readl_relaxed(ns_pa_addr);
+
+	if (soc_is_omap443x())
 		startup_pa = __pa_symbol(omap4_secondary_startup);
-	else if (cpu_is_omap446x())
+	else if (soc_is_omap446x())
 		startup_pa = __pa_symbol(omap4460_secondary_startup);
 	else if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
 		startup_pa = __pa_symbol(omap5_secondary_hyp_startup);
 	else
 		startup_pa = __pa_symbol(omap5_secondary_startup);
 
-	if (cpu_is_omap44xx())
+	if (soc_is_omap44xx())
 		writel_relaxed(startup_pa, sar_base +
 			       CPU1_WAKEUP_NS_PA_ADDR_OFFSET);
 	else

arch/arm/mach-omap2/omap-smc.S

@@ -94,6 +94,5 @@ ENTRY(omap_read_auxcoreboot0)
 	ldr	r12, =0x103
 	dsb
 	smc	#0
-	mov	r0, r0, lsr #9
 	ldmfd   sp!, {r2-r12, pc}
 ENDPROC(omap_read_auxcoreboot0)

arch/arm/mach-omap2/omap-smp.c

@@ -21,6 +21,7 @@
 #include <linux/io.h>
 #include <linux/irqchip/arm-gic.h>
 
+#include <asm/sections.h>
 #include <asm/smp_scu.h>
 #include <asm/virt.h>
 
@@ -40,10 +41,14 @@
 
 #define OMAP5_CORE_COUNT	0x2
 
+#define AUX_CORE_BOOT0_GP_RELEASE	0x020
+#define AUX_CORE_BOOT0_HS_RELEASE	0x200
+
 struct omap_smp_config {
 	unsigned long cpu1_rstctrl_pa;
 	void __iomem *cpu1_rstctrl_va;
 	void __iomem *scu_base;
+	void __iomem *wakeupgen_base;
 	void *startup_addr;
 };
 
@@ -140,7 +145,6 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	static struct clockdomain *cpu1_clkdm;
 	static bool booted;
 	static struct powerdomain *cpu1_pwrdm;
-	void __iomem *base = omap_get_wakeupgen_base();
 
 	/*
 	 * Set synchronisation state between this boot processor
@@ -155,9 +159,11 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * A barrier is added to ensure that write buffer is drained
 	 */
 	if (omap_secure_apis_support())
-		omap_modify_auxcoreboot0(0x200, 0xfffffdff);
+		omap_modify_auxcoreboot0(AUX_CORE_BOOT0_HS_RELEASE,
+					 0xfffffdff);
 	else
-		writel_relaxed(0x20, base + OMAP_AUX_CORE_BOOT_0);
+		writel_relaxed(AUX_CORE_BOOT0_GP_RELEASE,
+			       cfg.wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
 
 	if (!cpu1_clkdm && !cpu1_pwrdm) {
 		cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
@@ -261,9 +267,72 @@ static void __init omap4_smp_init_cpus(void)
 		set_cpu_possible(i, true);
 }
 
+/*
+ * For now, just make sure the start-up address is not within the booting
+ * kernel space as that means we just overwrote whatever secondary_startup()
+ * code there was.
+ */
+static bool __init omap4_smp_cpu1_startup_valid(unsigned long addr)
+{
+	if ((addr >= __pa(PAGE_OFFSET)) && (addr <= __pa(__bss_start)))
+		return false;
+
+	return true;
+}
+
+/*
+ * We may need to reset CPU1 before configuring, otherwise kexec boot can end
+ * up trying to use old kernel startup address or suspend-resume will
+ * occasionally fail to bring up CPU1 on 4430 if CPU1 fails to enter deeper
+ * idle states.
+ */
+static void __init omap4_smp_maybe_reset_cpu1(struct omap_smp_config *c)
+{
+	unsigned long cpu1_startup_pa, cpu1_ns_pa_addr;
+	bool needs_reset = false;
+	u32 released;
+
+	if (omap_secure_apis_support())
+		released = omap_read_auxcoreboot0() & AUX_CORE_BOOT0_HS_RELEASE;
+	else
+		released = readl_relaxed(cfg.wakeupgen_base +
+					 OMAP_AUX_CORE_BOOT_0) &
+						AUX_CORE_BOOT0_GP_RELEASE;
+	if (released) {
+		pr_warn("smp: CPU1 not parked?\n");
+
+		return;
+	}
+
+	cpu1_startup_pa = readl_relaxed(cfg.wakeupgen_base +
+					OMAP_AUX_CORE_BOOT_1);
+	cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr();
+
+	/* Did the configured secondary_startup() get overwritten? */
+	if (!omap4_smp_cpu1_startup_valid(cpu1_startup_pa))
+		needs_reset = true;
+
+	/*
+	 * If omap4 or 5 has NS_PA_ADDR configured, CPU1 may be in a
+	 * deeper idle state in WFI and will wake to an invalid address.
+	 */
+	if ((soc_is_omap44xx() || soc_is_omap54xx()) &&
+	    !omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr))
+		needs_reset = true;
+
+	if (!needs_reset || !c->cpu1_rstctrl_va)
+		return;
+
+	pr_info("smp: CPU1 parked within kernel, needs reset (0x%lx 0x%lx)\n",
+		cpu1_startup_pa, cpu1_ns_pa_addr);
+
+	writel_relaxed(1, c->cpu1_rstctrl_va);
+	readl_relaxed(c->cpu1_rstctrl_va);
+	writel_relaxed(0, c->cpu1_rstctrl_va);
+}
+
 static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 {
-	void __iomem *base = omap_get_wakeupgen_base();
 	const struct omap_smp_config *c = NULL;
 
 	if (soc_is_omap443x())
@@ -281,6 +350,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 	/* Must preserve cfg.scu_base set earlier */
 	cfg.cpu1_rstctrl_pa = c->cpu1_rstctrl_pa;
 	cfg.startup_addr = c->startup_addr;
+	cfg.wakeupgen_base = omap_get_wakeupgen_base();
 
 	if (soc_is_dra74x() || soc_is_omap54xx()) {
 		if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
@@ -299,15 +369,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 	if (cfg.scu_base)
 		scu_enable(cfg.scu_base);
 
-	/*
-	 * Reset CPU1 before configuring, otherwise kexec will
-	 * end up trying to use old kernel startup address.
-	 */
-	if (cfg.cpu1_rstctrl_va) {
-		writel_relaxed(1, cfg.cpu1_rstctrl_va);
-		readl_relaxed(cfg.cpu1_rstctrl_va);
-		writel_relaxed(0, cfg.cpu1_rstctrl_va);
-	}
+	omap4_smp_maybe_reset_cpu1(&cfg);
 
 	/*
 	 * Write the address of secondary startup routine into the
@@ -319,7 +381,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 		omap_auxcoreboot_addr(__pa_symbol(cfg.startup_addr));
 	else
 		writel_relaxed(__pa_symbol(cfg.startup_addr),
-			       base + OMAP_AUX_CORE_BOOT_1);
+			       cfg.wakeupgen_base + OMAP_AUX_CORE_BOOT_1);
 }
 
 const struct smp_operations omap4_smp_ops __initconst = {

arch/arm/mach-omap2/omap_device.c

@@ -222,6 +222,14 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 				dev_err(dev, "failed to idle\n");
 		}
 		break;
+	case BUS_NOTIFY_BIND_DRIVER:
+		od = to_omap_device(pdev);
+		if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) &&
+		    pm_runtime_status_suspended(dev)) {
+			od->_driver_status = BUS_NOTIFY_BIND_DRIVER;
+			pm_runtime_set_active(dev);
+		}
+		break;
 	case BUS_NOTIFY_ADD_DEVICE:
 		if (pdev->dev.of_node)
 			omap_device_build_from_dt(pdev);

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -2112,11 +2112,20 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
 };
 
 /* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
+	{
+		.pa_start	= OMAP34XX_SR1_BASE,
+		.pa_end		= OMAP34XX_SR1_BASE + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ },
+};
 
 static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap34xx_sr1_hwmod,
 	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -2124,15 +2133,25 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap36xx_sr1_hwmod,
 	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
 /* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
+	{
+		.pa_start	= OMAP34XX_SR2_BASE,
+		.pa_end		= OMAP34XX_SR2_BASE + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ },
+};
 
 static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap34xx_sr2_hwmod,
 	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -2140,6 +2159,7 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap36xx_sr2_hwmod,
 	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -3111,16 +3131,20 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = {
  * Return: 0 if device named @dev_name is not likely to be accessible,
  * or 1 if it is likely to be accessible.
  */
-static int __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
-						       const char *dev_name)
+static bool __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
+							const char *dev_name)
 {
+	struct device_node *node;
+	bool available;
+
 	if (!bus)
-		return (omap_type() == OMAP2_DEVICE_TYPE_GP) ? 1 : 0;
+		return omap_type() == OMAP2_DEVICE_TYPE_GP;
 
-	if (of_device_is_available(of_find_node_by_name(bus, dev_name)))
-		return 1;
+	node = of_get_child_by_name(bus, dev_name);
+	available = of_device_is_available(node);
+	of_node_put(node);
 
-	return 0;
+	return available;
 }
 
 int __init omap3xxx_hwmod_init(void)
@@ -3189,15 +3213,20 @@ int __init omap3xxx_hwmod_init(void)
 
 	if (h_sham && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "sham")) {
 		r = omap_hwmod_register_links(h_sham);
-		if (r < 0)
+		if (r < 0) {
+			of_node_put(bus);
 			return r;
+		}
 	}
 
 	if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) {
 		r = omap_hwmod_register_links(h_aes);
-		if (r < 0)
+		if (r < 0) {
+			of_node_put(bus);
 			return r;
+		}
 	}
+	of_node_put(bus);
 
 	/*
 	 * Register hwmod links specific to certain ES levels of a

arch/arm/mach-orion5x/Kconfig

@@ -6,6 +6,7 @@ menuconfig ARCH_ORION5X
 	select GPIOLIB
 	select MVEBU_MBUS
 	select PCI
+	select PHYLIB if NETDEVICES
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Orion 5x series SoCs:

arch/arm/mm/dma-mapping.c

@@ -935,13 +935,31 @@ static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_add
 	__arm_dma_free(dev, size, cpu_addr, handle, attrs, true);
 }
 
+/*
+ * The whole dma_get_sgtable() idea is fundamentally unsafe - it seems
+ * that the intention is to allow exporting memory allocated via the
+ * coherent DMA APIs through the dma_buf API, which only accepts a
+ * scattertable.  This presents a couple of problems:
+ * 1. Not all memory allocated via the coherent DMA APIs is backed by
+ *    a struct page
+ * 2. Passing coherent DMA memory into the streaming APIs is not allowed
+ *    as we will try to flush the memory through a different alias to that
+ *    actually being used (and the flushes are redundant.)
+ */
 int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
 		 void *cpu_addr, dma_addr_t handle, size_t size,
 		 unsigned long attrs)
 {
-	struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
+	unsigned long pfn = dma_to_pfn(dev, handle);
+	struct page *page;
 	int ret;
 
+	/* If the PFN is not valid, we do not have a struct page */
+	if (!pfn_valid(pfn))
+		return -ENXIO;
+
+	page = pfn_to_page(pfn);
+
 	ret = sg_alloc_table(sgt, 1, GFP_KERNEL);
 	if (unlikely(ret))
 		return ret;
@@ -2390,6 +2408,15 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	const struct dma_map_ops *dma_ops;
 
 	dev->archdata.dma_coherent = coherent;
+
+	/*
+	 * Don't override the dma_ops if they have already been set. Ideally
+	 * this should be the only location where dma_ops are set, remove this
+	 * check when all other callers of set_dma_ops will have disappeared.
+	 */
+	if (dev->dma_ops)
+		return;
+
 	if (arm_setup_iommu_dma_ops(dev, dma_base, size, iommu))
 		dma_ops = arm_get_iommu_dma_map_ops(coherent);
 	else

arch/arm/mm/nommu.c

@@ -303,7 +303,10 @@ static inline void set_vbar(unsigned long val)
  */
 static inline bool security_extensions_enabled(void)
 {
-	return !!cpuid_feature_extract(CPUID_EXT_PFR1, 4);
+	/* Check CPUID Identification Scheme before ID_PFR1 read */
+	if ((read_cpuid_id() & 0x000f0000) == 0x000f0000)
+		return !!cpuid_feature_extract(CPUID_EXT_PFR1, 4);
+	return 0;
 }
 
 static unsigned long __init setup_vectors_base(void)

arch/arm/plat-orion/common.c

@@ -468,6 +468,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 		    eth_data, &orion_ge11);
 }
 
+#ifdef CONFIG_ARCH_ORION5X
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
@@ -480,6 +481,9 @@ void __init orion_ge00_switch_init(struct dsa_chip_data *d)
 	struct mdio_board_info *bd;
 	unsigned int i;
 
+	if (!IS_BUILTIN(CONFIG_PHYLIB))
+		return;
+
 	for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
 		if (!strcmp(d->port_names[i], "cpu"))
 			break;
@@ -493,6 +497,7 @@ void __init orion_ge00_switch_init(struct dsa_chip_data *d)
 
 	mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
 }
+#endif
 
 /*****************************************************************************
  * I2C

arch/arm/probes/kprobes/core.c

@@ -266,11 +266,20 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
 #endif
 
 	if (p) {
-		if (cur) {
+		if (!p->ainsn.insn_check_cc(regs->ARM_cpsr)) {
+			/*
+			 * Probe hit but conditional execution check failed,
+			 * so just skip the instruction and continue as if
+			 * nothing had happened.
+			 * In this case, we can skip recursing check too.
+			 */
+			singlestep_skip(p, regs);
+		} else if (cur) {
 			/* Kprobe is pending, so we're recursing. */
 			switch (kcb->kprobe_status) {
 			case KPROBE_HIT_ACTIVE:
 			case KPROBE_HIT_SSDONE:
+			case KPROBE_HIT_SS:
 				/* A pre- or post-handler probe got us here. */
 				kprobes_inc_nmissed_count(p);
 				save_previous_kprobe(kcb);
@@ -279,11 +288,16 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
 				singlestep(p, regs, kcb);
 				restore_previous_kprobe(kcb);
 				break;
+			case KPROBE_REENTER:
+				/* A nested probe was hit in FIQ, it is a BUG */
+				pr_warn("Unrecoverable kprobe detected at %p.\n",
+					p->addr);
+				/* fall through */
 			default:
 				/* impossible cases */
 				BUG();
 			}
-		} else if (p->ainsn.insn_check_cc(regs->ARM_cpsr)) {
+		} else {
 			/* Probe hit and conditional execution check ok. */
 			set_current_kprobe(p);
 			kcb->kprobe_status = KPROBE_HIT_ACTIVE;
@@ -304,13 +318,6 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
 				}
 				reset_current_kprobe();
 			}
-		} else {
-			/*
-			 * Probe hit but conditional execution check failed,
-			 * so just skip the instruction and continue as if
-			 * nothing had happened.
-			 */
-			singlestep_skip(p, regs);
 		}
 	} else if (cur) {
 		/* We probably hit a jprobe.  Call its break handler. */
@@ -434,6 +441,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	struct hlist_node *tmp;
 	unsigned long flags, orig_ret_address = 0;
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+	kprobe_opcode_t *correct_ret_addr = NULL;
 
 	INIT_HLIST_HEAD(&empty_rp);
 	kretprobe_hash_lock(current, &head, &flags);
@@ -456,14 +464,34 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 			/* another task is sharing our hash bucket */
 			continue;
 
+		orig_ret_address = (unsigned long)ri->ret_addr;
+
+		if (orig_ret_address != trampoline_address)
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+	}
+
+	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+	correct_ret_addr = ri->ret_addr;
+	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
+
+		orig_ret_address = (unsigned long)ri->ret_addr;
 		if (ri->rp && ri->rp->handler) {
 			__this_cpu_write(current_kprobe, &ri->rp->kp);
 			get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
+			ri->ret_addr = correct_ret_addr;
 			ri->rp->handler(ri, regs);
 			__this_cpu_write(current_kprobe, NULL);
 		}
 
-		orig_ret_address = (unsigned long)ri->ret_addr;
 		recycle_rp_inst(ri, &empty_rp);
 
 		if (orig_ret_address != trampoline_address)
@@ -475,7 +503,6 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 			break;
 	}
 
-	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {

arch/arm/probes/kprobes/test-core.c

@@ -977,7 +977,10 @@ static void coverage_end(void)
 void __naked __kprobes_test_case_start(void)
 {
 	__asm__ __volatile__ (
-		"stmdb	sp!, {r4-r11}				\n\t"
+		"mov	r2, sp					\n\t"
+		"bic	r3, r2, #7				\n\t"
+		"mov	sp, r3					\n\t"
+		"stmdb	sp!, {r2-r11}				\n\t"
 		"sub	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
 		"bic	r0, lr, #1  @ r0 = inline data		\n\t"
 		"mov	r1, sp					\n\t"
@@ -997,7 +1000,8 @@ void __naked __kprobes_test_case_end_32(void)
 		"movne	pc, r0					\n\t"
 		"mov	r0, r4					\n\t"
 		"add	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
-		"ldmia	sp!, {r4-r11}				\n\t"
+		"ldmia	sp!, {r2-r11}				\n\t"
+		"mov	sp, r2					\n\t"
 		"mov	pc, r0					\n\t"
 	);
 }
@@ -1013,7 +1017,8 @@ void __naked __kprobes_test_case_end_16(void)
 		"bxne	r0					\n\t"
 		"mov	r0, r4					\n\t"
 		"add	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
-		"ldmia	sp!, {r4-r11}				\n\t"
+		"ldmia	sp!, {r2-r11}				\n\t"
+		"mov	sp, r2					\n\t"
 		"bx	r0					\n\t"
 	);
 }

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -179,8 +179,10 @@
 		usbphy: phy@01c19400 {
 			compatible = "allwinner,sun50i-a64-usb-phy";
 			reg = <0x01c19400 0x14>,
+			      <0x01c1a800 0x4>,
 			      <0x01c1b800 0x4>;
 			reg-names = "phy_ctrl",
+				    "pmu0",
 				    "pmu1";
 			clocks = <&ccu CLK_USB_PHY0>,
 				 <&ccu CLK_USB_PHY1>;

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -114,6 +114,7 @@
 	pcie0: pcie@20020000 {
 		compatible = "brcm,iproc-pcie";
 		reg = <0 0x20020000 0 0x1000>;
+		dma-coherent;
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
@@ -144,6 +145,7 @@
 	pcie4: pcie@50020000 {
 		compatible = "brcm,iproc-pcie";
 		reg = <0 0x50020000 0 0x1000>;
+		dma-coherent;
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
@@ -174,6 +176,7 @@
 	pcie8: pcie@60c00000 {
 		compatible = "brcm,iproc-pcie-paxc";
 		reg = <0 0x60c00000 0 0x1000>;
+		dma-coherent;
 		linux,pci-domain = <8>;
 
 		bus-range = <0x0 0x1>;
@@ -203,6 +206,7 @@
 			      <0x61030000 0x100>;
 			reg-names = "amac_base", "idm_base", "nicpm_base";
 			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			phy-handle = <&gphy0>;
 			phy-mode = "rgmii";
 			status = "disabled";
@@ -213,6 +217,7 @@
 			reg = <0x612c0000 0x445>;  /* PDC FS0 regs */
 			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
+			dma-coherent;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 		};
@@ -222,6 +227,7 @@
 			reg = <0x612e0000 0x445>;  /* PDC FS1 regs */
 			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
+			dma-coherent;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 		};
@@ -231,6 +237,7 @@
 			reg = <0x61300000 0x445>;  /* PDC FS2 regs */
 			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
+			dma-coherent;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 		};
@@ -240,6 +247,7 @@
 			reg = <0x61320000 0x445>;  /* PDC FS3 regs */
 			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
+			dma-coherent;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 		};
@@ -644,6 +652,7 @@
 		sata: ahci@663f2000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x663f2000 0x1000>;
+			dma-coherent;
 			reg-names = "ahci";
 			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -667,6 +676,7 @@
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x66420000 0x100>;
 			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			bus-width = <8>;
 			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
 			status = "disabled";
@@ -676,6 +686,7 @@
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x66430000 0x100>;
 			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			bus-width = <8>;
 			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
 			status = "disabled";

arch/arm64/include/asm/current.h

@@ -3,8 +3,6 @@
 
 #include <linux/compiler.h>
 
-#include <asm/sysreg.h>
-
 #ifndef __ASSEMBLY__
 
 struct task_struct;

arch/arm64/include/asm/unistd.h

@@ -44,7 +44,7 @@
 #define __ARM_NR_compat_cacheflush	(__ARM_NR_COMPAT_BASE+2)
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE+5)
 
-#define __NR_compat_syscalls		394
+#define __NR_compat_syscalls		398
 #endif
 
 #define __ARCH_WANT_SYS_CLONE

arch/arm64/include/asm/unistd32.h

@@ -809,6 +809,14 @@ __SYSCALL(__NR_copy_file_range, sys_copy_file_range)
 __SYSCALL(__NR_preadv2, compat_sys_preadv2)
 #define __NR_pwritev2 393
 __SYSCALL(__NR_pwritev2, compat_sys_pwritev2)
+#define __NR_pkey_mprotect 394
+__SYSCALL(__NR_pkey_mprotect, sys_pkey_mprotect)
+#define __NR_pkey_alloc 395
+__SYSCALL(__NR_pkey_alloc, sys_pkey_alloc)
+#define __NR_pkey_free 396
+__SYSCALL(__NR_pkey_free, sys_pkey_free)
+#define __NR_statx 397
+__SYSCALL(__NR_statx, sys_statx)
 
 /*
  * Please add new compat syscalls above this comment and update

arch/arm64/kernel/kaslr.c

@@ -131,11 +131,15 @@ u64 __init kaslr_early_init(u64 dt_phys, u64 modulo_offset)
 	/*
 	 * The kernel Image should not extend across a 1GB/32MB/512MB alignment
 	 * boundary (for 4KB/16KB/64KB granule kernels, respectively). If this
-	 * happens, increase the KASLR offset by the size of the kernel image.
+	 * happens, increase the KASLR offset by the size of the kernel image
+	 * rounded up by SWAPPER_BLOCK_SIZE.
 	 */
 	if ((((u64)_text + offset + modulo_offset) >> SWAPPER_TABLE_SHIFT) !=
-	    (((u64)_end + offset + modulo_offset) >> SWAPPER_TABLE_SHIFT))
-		offset = (offset + (u64)(_end - _text)) & mask;
+	    (((u64)_end + offset + modulo_offset) >> SWAPPER_TABLE_SHIFT)) {
+		u64 kimg_sz = _end - _text;
+		offset = (offset + round_up(kimg_sz, SWAPPER_BLOCK_SIZE))
+				& mask;
+	}
 
 	if (IS_ENABLED(CONFIG_KASAN))
 		/*

arch/arm64/kernel/smp.c

@@ -944,7 +944,7 @@ static bool have_cpu_die(void)
 #ifdef CONFIG_HOTPLUG_CPU
 	int any_cpu = raw_smp_processor_id();
 
-	if (cpu_ops[any_cpu]->cpu_die)
+	if (cpu_ops[any_cpu] && cpu_ops[any_cpu]->cpu_die)
 		return true;
 #endif
 	return false;

arch/arm64/kernel/vdso/.gitignore

@@ -1,2 +1 @@
 vdso.lds
-vdso-offsets.h

arch/arm64/mm/dma-mapping.c

@@ -28,6 +28,7 @@
 #include <linux/dma-contiguous.h>
 #include <linux/vmalloc.h>
 #include <linux/swiotlb.h>
+#include <linux/pci.h>
 
 #include <asm/cacheflush.h>
 
@@ -813,34 +814,26 @@ static const struct dma_map_ops iommu_dma_ops = {
 	.mapping_error = iommu_dma_mapping_error,
 };
 
-/*
- * TODO: Right now __iommu_setup_dma_ops() gets called too early to do
- * everything it needs to - the device is only partially created and the
- * IOMMU driver hasn't seen it yet, so it can't have a group. Thus we
- * need this delayed attachment dance. Once IOMMU probe ordering is sorted
- * to move the arch_setup_dma_ops() call later, all the notifier bits below
- * become unnecessary, and will go away.
- */
-struct iommu_dma_notifier_data {
-	struct list_head list;
-	struct device *dev;
-	const struct iommu_ops *ops;
-	u64 dma_base;
-	u64 size;
-};
-static LIST_HEAD(iommu_dma_masters);
-static DEFINE_MUTEX(iommu_dma_notifier_lock);
+static int __init __iommu_dma_init(void)
+{
+	return iommu_dma_init();
+}
+arch_initcall(__iommu_dma_init);
 
-static bool do_iommu_attach(struct device *dev, const struct iommu_ops *ops,
-			   u64 dma_base, u64 size)
+static void __iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+				  const struct iommu_ops *ops)
 {
-	struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
+	struct iommu_domain *domain;
+
+	if (!ops)
+		return;
 
 	/*
-	 * If the IOMMU driver has the DMA domain support that we require,
-	 * then the IOMMU core will have already configured a group for this
-	 * device, and allocated the default domain for that group.
+	 * The IOMMU core code allocates the default DMA domain, which the
+	 * underlying IOMMU driver needs to support via the dma-iommu layer.
 	 */
+	domain = iommu_get_domain_for_dev(dev);
+
 	if (!domain)
 		goto out_err;
 
@@ -851,109 +844,11 @@ static bool do_iommu_attach(struct device *dev, const struct iommu_ops *ops,
 		dev->dma_ops = &iommu_dma_ops;
 	}
 
-	return true;
+	return;
+
 out_err:
-	pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA ops\n",
+	 pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA ops\n",
 		 dev_name(dev));
-	return false;
-}
-
-static void queue_iommu_attach(struct device *dev, const struct iommu_ops *ops,
-			      u64 dma_base, u64 size)
-{
-	struct iommu_dma_notifier_data *iommudata;
-
-	iommudata = kzalloc(sizeof(*iommudata), GFP_KERNEL);
-	if (!iommudata)
-		return;
-
-	iommudata->dev = dev;
-	iommudata->ops = ops;
-	iommudata->dma_base = dma_base;
-	iommudata->size = size;
-
-	mutex_lock(&iommu_dma_notifier_lock);
-	list_add(&iommudata->list, &iommu_dma_masters);
-	mutex_unlock(&iommu_dma_notifier_lock);
-}
-
-static int __iommu_attach_notifier(struct notifier_block *nb,
-				   unsigned long action, void *data)
-{
-	struct iommu_dma_notifier_data *master, *tmp;
-
-	if (action != BUS_NOTIFY_BIND_DRIVER)
-		return 0;
-
-	mutex_lock(&iommu_dma_notifier_lock);
-	list_for_each_entry_safe(master, tmp, &iommu_dma_masters, list) {
-		if (data == master->dev && do_iommu_attach(master->dev,
-				master->ops, master->dma_base, master->size)) {
-			list_del(&master->list);
-			kfree(master);
-			break;
-		}
-	}
-	mutex_unlock(&iommu_dma_notifier_lock);
-	return 0;
-}
-
-static int __init register_iommu_dma_ops_notifier(struct bus_type *bus)
-{
-	struct notifier_block *nb = kzalloc(sizeof(*nb), GFP_KERNEL);
-	int ret;
-
-	if (!nb)
-		return -ENOMEM;
-
-	nb->notifier_call = __iommu_attach_notifier;
-
-	ret = bus_register_notifier(bus, nb);
-	if (ret) {
-		pr_warn("Failed to register DMA domain notifier; IOMMU DMA ops unavailable on bus '%s'\n",
-			bus->name);
-		kfree(nb);
-	}
-	return ret;
-}
-
-static int __init __iommu_dma_init(void)
-{
-	int ret;
-
-	ret = iommu_dma_init();
-	if (!ret)
-		ret = register_iommu_dma_ops_notifier(&platform_bus_type);
-	if (!ret)
-		ret = register_iommu_dma_ops_notifier(&amba_bustype);
-#ifdef CONFIG_PCI
-	if (!ret)
-		ret = register_iommu_dma_ops_notifier(&pci_bus_type);
-#endif
-	return ret;
-}
-arch_initcall(__iommu_dma_init);
-
-static void __iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-				  const struct iommu_ops *ops)
-{
-	struct iommu_group *group;
-
-	if (!ops)
-		return;
-	/*
-	 * TODO: As a concession to the future, we're ready to handle being
-	 * called both early and late (i.e. after bus_add_device). Once all
-	 * the platform bus code is reworked to call us late and the notifier
-	 * junk above goes away, move the body of do_iommu_attach here.
-	 */
-	group = iommu_group_get(dev);
-	if (group) {
-		do_iommu_attach(dev, ops, dma_base, size);
-		iommu_group_put(group);
-	} else {
-		queue_iommu_attach(dev, ops, dma_base, size);
-	}
 }
 
 void arch_teardown_dma_ops(struct device *dev)

arch/arm64/mm/fault.c

@@ -42,7 +42,20 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
-static const char *fault_name(unsigned int esr);
+struct fault_info {
+	int	(*fn)(unsigned long addr, unsigned int esr,
+		      struct pt_regs *regs);
+	int	sig;
+	int	code;
+	const char *name;
+};
+
+static const struct fault_info fault_info[];
+
+static inline const struct fault_info *esr_to_fault_info(unsigned int esr)
+{
+	return fault_info + (esr & 63);
+}
 
 #ifdef CONFIG_KPROBES
 static inline int notify_page_fault(struct pt_regs *regs, unsigned int esr)
@@ -197,10 +210,12 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr,
 			    struct pt_regs *regs)
 {
 	struct siginfo si;
+	const struct fault_info *inf;
 
 	if (unhandled_signal(tsk, sig) && show_unhandled_signals_ratelimited()) {
+		inf = esr_to_fault_info(esr);
 		pr_info("%s[%d]: unhandled %s (%d) at 0x%08lx, esr 0x%03x\n",
-			tsk->comm, task_pid_nr(tsk), fault_name(esr), sig,
+			tsk->comm, task_pid_nr(tsk), inf->name, sig,
 			addr, esr);
 		show_pte(tsk->mm, addr);
 		show_regs(regs);
@@ -219,14 +234,16 @@ static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *re
 {
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->active_mm;
+	const struct fault_info *inf;
 
 	/*
 	 * If we are in kernel mode at this point, we have no context to
 	 * handle this fault with.
 	 */
-	if (user_mode(regs))
-		__do_user_fault(tsk, addr, esr, SIGSEGV, SEGV_MAPERR, regs);
-	else
+	if (user_mode(regs)) {
+		inf = esr_to_fault_info(esr);
+		__do_user_fault(tsk, addr, esr, inf->sig, inf->code, regs);
+	} else
 		__do_kernel_fault(mm, addr, esr, regs);
 }
 
@@ -488,12 +505,7 @@ static int do_bad(unsigned long addr, unsigned int esr, struct pt_regs *regs)
 	return 1;
 }
 
-static const struct fault_info {
-	int	(*fn)(unsigned long addr, unsigned int esr, struct pt_regs *regs);
-	int	sig;
-	int	code;
-	const char *name;
-} fault_info[] = {
+static const struct fault_info fault_info[] = {
 	{ do_bad,		SIGBUS,  0,		"ttbr address size fault"	},
 	{ do_bad,		SIGBUS,  0,		"level 1 address size fault"	},
 	{ do_bad,		SIGBUS,  0,		"level 2 address size fault"	},
@@ -560,19 +572,13 @@ static const struct fault_info {
 	{ do_bad,		SIGBUS,  0,		"unknown 63"			},
 };
 
-static const char *fault_name(unsigned int esr)
-{
-	const struct fault_info *inf = fault_info + (esr & 63);
-	return inf->name;
-}
-
 /*
  * Dispatch a data abort to the relevant handler.
  */
 asmlinkage void __exception do_mem_abort(unsigned long addr, unsigned int esr,
 					 struct pt_regs *regs)
 {
-	const struct fault_info *inf = fault_info + (esr & 63);
+	const struct fault_info *inf = esr_to_fault_info(esr);
 	struct siginfo info;
 
 	if (!inf->fn(addr, esr, regs))

arch/arm64/mm/hugetlbpage.c

@@ -294,10 +294,6 @@ static __init int setup_hugepagesz(char *opt)
 		hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
 	} else if (ps == PUD_SIZE) {
 		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
-	} else if (ps == (PAGE_SIZE * CONT_PTES)) {
-		hugetlb_add_hstate(CONT_PTE_SHIFT);
-	} else if (ps == (PMD_SIZE * CONT_PMDS)) {
-		hugetlb_add_hstate((PMD_SHIFT + CONT_PMD_SHIFT) - PAGE_SHIFT);
 	} else {
 		hugetlb_bad_size();
 		pr_err("hugepagesz: Unsupported page size %lu K\n", ps >> 10);
@@ -306,13 +302,3 @@ static __init int setup_hugepagesz(char *opt)
 	return 1;
 }
 __setup("hugepagesz=", setup_hugepagesz);
-
-#ifdef CONFIG_ARM64_64K_PAGES
-static __init int add_default_hugepagesz(void)
-{
-	if (size_to_hstate(CONT_PTES * PAGE_SIZE) == NULL)
-		hugetlb_add_hstate(CONT_PTE_SHIFT);
-	return 0;
-}
-arch_initcall(add_default_hugepagesz);
-#endif

arch/c6x/kernel/ptrace.c

@@ -70,46 +70,6 @@ static int gpr_get(struct task_struct *target,
 				   0, sizeof(*regs));
 }
 
-static int gpr_set(struct task_struct *target,
-		   const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-	struct pt_regs *regs = task_pt_regs(target);
-
-	/* Don't copyin TSR or CSR */
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs,
-				 0, PT_TSR * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-					PT_TSR * sizeof(long),
-					(PT_TSR + 1) * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs,
-				 (PT_TSR + 1) * sizeof(long),
-				 PT_CSR * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-					PT_CSR * sizeof(long),
-					(PT_CSR + 1) * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs,
-				 (PT_CSR + 1) * sizeof(long), -1);
-	return ret;
-}
-
 enum c6x_regset {
 	REGSET_GPR,
 };
@@ -121,7 +81,6 @@ static const struct user_regset c6x_regsets[] = {
 		.size = sizeof(u32),
 		.align = sizeof(u32),
 		.get = gpr_get,
-		.set = gpr_set
 	},
 };
 

arch/h8300/kernel/ptrace.c

@@ -95,7 +95,8 @@ static int regs_get(struct task_struct *target,
 	long *reg = (long *)&regs;
 
 	/* build user regs in buffer */
-	for (r = 0; r < ARRAY_SIZE(register_offset); r++)
+	BUILD_BUG_ON(sizeof(regs) % sizeof(long) != 0);
+	for (r = 0; r < sizeof(regs) / sizeof(long); r++)
 		*reg++ = h8300_get_reg(target, r);
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
@@ -113,7 +114,8 @@ static int regs_set(struct task_struct *target,
 	long *reg;
 
 	/* build user regs in buffer */
-	for (reg = (long *)&regs, r = 0; r < ARRAY_SIZE(register_offset); r++)
+	BUILD_BUG_ON(sizeof(regs) % sizeof(long) != 0);
+	for (reg = (long *)&regs, r = 0; r < sizeof(regs) / sizeof(long); r++)
 		*reg++ = h8300_get_reg(target, r);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
@@ -122,7 +124,7 @@ static int regs_set(struct task_struct *target,
 		return ret;
 
 	/* write back to pt_regs */
-	for (reg = (long *)&regs, r = 0; r < ARRAY_SIZE(register_offset); r++)
+	for (reg = (long *)&regs, r = 0; r < sizeof(regs) / sizeof(long); r++)
 		h8300_put_reg(target, r, *reg++);
 	return 0;
 }

arch/ia64/include/asm/asm-prototypes.h

@@ -0,0 +1,29 @@
+#ifndef _ASM_IA64_ASM_PROTOTYPES_H
+#define _ASM_IA64_ASM_PROTOTYPES_H
+
+#include <asm/cacheflush.h>
+#include <asm/checksum.h>
+#include <asm/esi.h>
+#include <asm/ftrace.h>
+#include <asm/page.h>
+#include <asm/pal.h>
+#include <asm/string.h>
+#include <asm/uaccess.h>
+#include <asm/unwind.h>
+#include <asm/xor.h>
+
+extern const char ia64_ivt[];
+
+signed int __divsi3(signed int, unsigned int);
+signed int __modsi3(signed int, unsigned int);
+
+signed long long __divdi3(signed long long, unsigned long long);
+signed long long __moddi3(signed long long, unsigned long long);
+
+unsigned int __udivsi3(unsigned int, unsigned int);
+unsigned int __umodsi3(unsigned int, unsigned int);
+
+unsigned long long __udivdi3(unsigned long long, unsigned long long);
+unsigned long long __umoddi3(unsigned long long, unsigned long long);
+
+#endif /* _ASM_IA64_ASM_PROTOTYPES_H */

arch/ia64/lib/Makefile

@@ -24,25 +24,25 @@ AFLAGS___modsi3.o	=	     -DMODULO
 AFLAGS___umodsi3.o	= -DUNSIGNED -DMODULO
 
 $(obj)/__divdi3.o: $(src)/idiv64.S FORCE
-	$(call if_changed_dep,as_o_S)
+	$(call if_changed_rule,as_o_S)
 
 $(obj)/__udivdi3.o: $(src)/idiv64.S FORCE
-	$(call if_changed_dep,as_o_S)
+	$(call if_changed_rule,as_o_S)
 
 $(obj)/__moddi3.o: $(src)/idiv64.S FORCE
-	$(call if_changed_dep,as_o_S)
+	$(call if_changed_rule,as_o_S)
 
 $(obj)/__umoddi3.o: $(src)/idiv64.S FORCE
-	$(call if_changed_dep,as_o_S)
+	$(call if_changed_rule,as_o_S)
 
 $(obj)/__divsi3.o: $(src)/idiv32.S FORCE
-	$(call if_changed_dep,as_o_S)
+	$(call if_changed_rule,as_o_S)
 
 $(obj)/__udivsi3.o: $(src)/idiv32.S FORCE
-	$(call if_changed_dep,as_o_S)
+	$(call if_changed_rule,as_o_S)
 
 $(obj)/__modsi3.o: $(src)/idiv32.S FORCE
-	$(call if_changed_dep,as_o_S)
+	$(call if_changed_rule,as_o_S)
 
 $(obj)/__umodsi3.o: $(src)/idiv32.S FORCE
-	$(call if_changed_dep,as_o_S)
+	$(call if_changed_rule,as_o_S)

arch/m68k/configs/amiga_defconfig

@@ -25,6 +25,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -60,6 +61,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -71,6 +73,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -101,6 +104,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -298,6 +302,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -371,6 +377,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -383,6 +390,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_A2065=y
 CONFIG_ARIADNE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -404,7 +412,6 @@ CONFIG_ZORRO8390=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -564,6 +571,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -594,6 +603,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -605,6 +615,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -629,4 +640,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/apollo_defconfig

@@ -26,6 +26,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -58,6 +59,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -69,6 +71,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -99,6 +102,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -296,6 +300,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -353,6 +359,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -362,6 +369,7 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -378,7 +386,6 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -523,6 +530,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -553,6 +562,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -564,6 +574,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -588,4 +599,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/atari_defconfig

@@ -25,6 +25,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -58,6 +59,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -69,6 +71,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -99,6 +102,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -296,6 +300,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -362,6 +368,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -372,6 +379,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_ATARILANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -389,7 +397,6 @@ CONFIG_NE2000=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 CONFIG_SMC91X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -544,6 +551,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -574,6 +583,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -585,6 +595,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -609,4 +620,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/bvme6000_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
@@ -56,6 +57,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -67,6 +69,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -97,6 +100,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -294,6 +298,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -352,6 +358,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -361,6 +368,7 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -377,7 +385,6 @@ CONFIG_BVME6000_NET=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -515,6 +522,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -545,6 +554,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -556,6 +566,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -580,4 +591,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/hp300_defconfig

@@ -26,6 +26,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -58,6 +59,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -69,6 +71,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -99,6 +102,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -296,6 +300,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -353,6 +359,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -363,6 +370,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_HPLANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -379,7 +387,6 @@ CONFIG_HPLANCE=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -525,6 +532,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -555,6 +564,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -566,6 +576,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -590,4 +601,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mac_defconfig

@@ -25,6 +25,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -57,6 +58,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -68,6 +70,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -98,6 +101,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -298,6 +302,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -369,6 +375,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -379,6 +386,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -398,7 +406,6 @@ CONFIG_MAC8390=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -547,6 +554,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -577,6 +586,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -588,6 +598,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -612,4 +623,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/multi_defconfig

@@ -21,6 +21,7 @@ CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -67,6 +68,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -78,6 +80,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -108,6 +111,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -308,6 +312,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -402,6 +408,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -419,6 +426,7 @@ CONFIG_HPLANCE=y
 CONFIG_MVME147_NET=y
 CONFIG_SUN3LANCE=y
 CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -444,7 +452,6 @@ CONFIG_ZORRO8390=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 CONFIG_SMC91X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PLIP=m
@@ -627,6 +634,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -657,6 +666,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -668,6 +678,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -692,4 +703,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mvme147_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68030=y
@@ -55,6 +56,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -66,6 +68,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -96,6 +99,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -293,6 +297,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -351,6 +357,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -361,6 +368,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_MVME147_NET=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -377,7 +385,6 @@ CONFIG_MVME147_NET=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -515,6 +522,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -545,6 +554,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -556,6 +566,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -580,4 +591,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mvme16x_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
@@ -56,6 +57,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -67,6 +69,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -97,6 +100,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -294,6 +298,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -352,6 +358,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -361,6 +368,7 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -377,7 +385,6 @@ CONFIG_MVME16x_NET=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -515,6 +522,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -545,6 +554,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -556,6 +566,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -580,4 +591,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/q40_defconfig

@@ -26,6 +26,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
@@ -56,6 +57,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -67,6 +69,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -97,6 +100,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -294,6 +298,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -358,6 +364,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -369,6 +376,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 # CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -388,7 +396,6 @@ CONFIG_NE2000=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PLIP=m
@@ -538,6 +545,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -568,6 +577,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -579,6 +589,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -603,4 +614,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m