Merge tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

Pull "Samsung cleanup for 3.18" from Kukjin Kim:

- remove unused <mach/memory.h> in exynos
- local <mach/regs-clock.h> for s5pv210
- cleanup boot address calculate for exynos
- remove separate restart code for s3c24xx

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C24XX: remove separate restart code
  ARM: EXYNOS: Do not calculate boot address twice
  ARM: S5PV210: move <mach/regs-clock.h> into mach-s5pv210/
  ARM: EXYNOS: remove unused <mach/memory.h>

arch/arm/mach-exynos/include/mach/memory.h

@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H __FILE__
-
-#define PLAT_PHYS_OFFSET		UL(0x40000000)
-
-#ifndef CONFIG_ARM_LPAE
-/* Maximum of 256MiB in one bank */
-#define MAX_PHYSMEM_BITS	32
-#define SECTION_SIZE_BITS	28
-#else
-#define MAX_PHYSMEM_BITS	36
-#define SECTION_SIZE_BITS	31
-#endif
-
-#endif /* __ASM_ARCH_MEMORY_H */

arch/arm/mach-exynos/platsmp.c

@@ -224,7 +224,7 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 				ret = PTR_ERR(boot_reg);
 				goto fail;
 			}
-			__raw_writel(boot_addr, cpu_boot_reg(core_id));
+			__raw_writel(boot_addr, boot_reg);
 		}
 
 		call_firmware_op(cpu_boot, core_id);
@@ -313,7 +313,7 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 
 			if (IS_ERR(boot_reg))
 				break;
-			__raw_writel(boot_addr, cpu_boot_reg(core_id));
+			__raw_writel(boot_addr, boot_reg);
 		}
 	}
 }

arch/arm/mach-s3c24xx/Kconfig

@@ -32,7 +32,6 @@ config CPU_S3C2410
 	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
-	select SAMSUNG_WDT_RESET
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -76,7 +75,6 @@ config CPU_S3C2442
 config CPU_S3C244X
 	def_bool y
 	depends on CPU_S3C2440 || CPU_S3C2442
-	select SAMSUNG_WDT_RESET
 
 config CPU_S3C2443
 	bool "SAMSUNG S3C2443"

arch/arm/mach-s3c24xx/common.c

@@ -51,7 +51,6 @@
 #include <plat/devs.h>
 #include <plat/cpu-freq.h>
 #include <plat/pwm-core.h>
-#include <plat/watchdog-reset.h>
 
 #include "common.h"
 
@@ -513,7 +512,6 @@ struct platform_device s3c2443_device_dma = {
 void __init s3c2410_init_clocks(int xtal)
 {
 	s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 #endif
 
@@ -535,7 +533,6 @@ void __init s3c2416_init_clocks(int xtal)
 void __init s3c2440_init_clocks(int xtal)
 {
 	s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 #endif
 
@@ -543,7 +540,6 @@ void __init s3c2440_init_clocks(int xtal)
 void __init s3c2442_init_clocks(int xtal)
 {
 	s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 #endif
 

arch/arm/mach-s3c24xx/common.h

@@ -22,7 +22,6 @@ extern  int s3c2410a_init(void);
 extern void s3c2410_map_io(void);
 extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void s3c2410_init_clocks(int xtal);
-extern void s3c2410_restart(enum reboot_mode mode, const char *cmd);
 extern void s3c2410_init_irq(void);
 #else
 #define s3c2410_init_clocks NULL
@@ -38,7 +37,6 @@ extern void s3c2412_map_io(void);
 extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void s3c2412_init_clocks(int xtal);
 extern  int s3c2412_baseclk_add(void);
-extern void s3c2412_restart(enum reboot_mode mode, const char *cmd);
 extern void s3c2412_init_irq(void);
 #else
 #define s3c2412_init_clocks NULL
@@ -53,7 +51,6 @@ extern void s3c2416_map_io(void);
 extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void s3c2416_init_clocks(int xtal);
 extern  int s3c2416_baseclk_add(void);
-extern void s3c2416_restart(enum reboot_mode mode, const char *cmd);
 extern void s3c2416_init_irq(void);
 
 extern struct syscore_ops s3c2416_irq_syscore_ops;
@@ -67,7 +64,6 @@ extern struct syscore_ops s3c2416_irq_syscore_ops;
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 extern void s3c244x_map_io(void);
 extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c244x_restart(enum reboot_mode mode, const char *cmd);
 #else
 #define s3c244x_init_uarts NULL
 #endif
@@ -98,7 +94,6 @@ extern void s3c2443_map_io(void);
 extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void s3c2443_init_clocks(int xtal);
 extern  int s3c2443_baseclk_add(void);
-extern void s3c2443_restart(enum reboot_mode mode, const char *cmd);
 extern void s3c2443_init_irq(void);
 #else
 #define s3c2443_init_clocks NULL

arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h

@@ -42,8 +42,6 @@
 #define S3C2443_URSTCON			S3C2443_CLKREG(0x88)
 #define S3C2443_UCLKCON			S3C2443_CLKREG(0x8C)
 
-#define S3C2443_SWRST_RESET		(0x533c2443)
-
 #define S3C2443_PLLCON_OFF		(1<<24)
 
 #define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)

arch/arm/mach-s3c24xx/mach-amlm5900.c

@@ -247,5 +247,4 @@ MACHINE_START(AML_M5900, "AML_M5900")
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= amlm5900_init,
 	.init_time	= amlm5900_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -430,5 +430,4 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.init_machine	= anubis_init,
 	.init_irq	= s3c2440_init_irq,
 	.init_time	= anubis_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -218,5 +218,4 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c2440_init_irq,
 	.init_time	= at2440evb_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-bast.c

@@ -591,5 +591,4 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= bast_init,
 	.init_time	= bast_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -597,5 +597,4 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.init_irq	= s3c2442_init_irq,
 	.init_machine	= gta02_machine_init,
 	.init_time	= gta02_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -747,5 +747,4 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= h1940_init,
 	.init_time	= h1940_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-jive.c

@@ -670,5 +670,4 @@ MACHINE_START(JIVE, "JIVE")
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
 	.init_time	= jive_init_time,
-	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -695,5 +695,4 @@ MACHINE_START(MINI2440, "MINI2440")
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c2440_init_irq,
 	.init_time	= mini2440_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-n30.c

@@ -599,7 +599,6 @@ MACHINE_START(N30, "Acer-N30")
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
-	.restart	= s3c2410_restart,
 MACHINE_END
 
 MACHINE_START(N35, "Acer-N35")
@@ -610,5 +609,4 @@ MACHINE_START(N35, "Acer-N35")
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
-	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-nexcoder.c

@@ -159,5 +159,4 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c2440_init_irq,
 	.init_time	= nexcoder_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -412,5 +412,4 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= osiris_init,
 	.init_time	= osiris_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-otom.c

@@ -122,5 +122,4 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.init_machine	= otom11_init,
 	.init_irq	= s3c2410_init_irq,
 	.init_time	= otom11_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-qt2410.c

@@ -352,5 +352,4 @@ MACHINE_START(QT2410, "QT2410")
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= qt2410_machine_init,
 	.init_time	= qt2410_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -812,5 +812,4 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.init_irq	= s3c2442_init_irq,
 	.init_machine = rx1950_init_machine,
 	.init_time	= rx1950_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-rx3715.c

@@ -215,5 +215,4 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.init_time	= rx3715_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-s3c2416-dt.c

@@ -51,5 +51,4 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
 	.map_io		= s3c2416_dt_map_io,
 	.init_irq	= irqchip_init,
 	.init_machine	= s3c2416_dt_machine_init,
-	.restart	= s3c2416_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2410.c

@@ -124,5 +124,4 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= smdk2410_init,
 	.init_time	= smdk2410_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2413.c

@@ -138,7 +138,6 @@ MACHINE_START(S3C2413, "S3C2413")
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
 	.init_time	= samsung_timer_init,
-	.restart	= s3c2412_restart,
 MACHINE_END
 
 MACHINE_START(SMDK2412, "SMDK2412")
@@ -150,7 +149,6 @@ MACHINE_START(SMDK2412, "SMDK2412")
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
 	.init_time	= samsung_timer_init,
-	.restart	= s3c2412_restart,
 MACHINE_END
 
 MACHINE_START(SMDK2413, "SMDK2413")
@@ -162,5 +160,4 @@ MACHINE_START(SMDK2413, "SMDK2413")
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
 	.init_time	= smdk2413_init_time,
-	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2416.c

@@ -262,5 +262,4 @@ MACHINE_START(SMDK2416, "SMDK2416")
 	.map_io		= smdk2416_map_io,
 	.init_machine	= smdk2416_machine_init,
 	.init_time	= smdk2416_init_time,
-	.restart	= s3c2416_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2440.c

@@ -185,5 +185,4 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
 	.init_time	= smdk2440_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2443.c

@@ -150,5 +150,4 @@ MACHINE_START(SMDK2443, "SMDK2443")
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
 	.init_time	= smdk2443_init_time,
-	.restart	= s3c2443_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-tct_hammer.c

@@ -157,5 +157,4 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= tct_hammer_init,
 	.init_time	= tct_hammer_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-vr1000.c

@@ -340,5 +340,4 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c2410_init_irq,
 	.init_time	= vr1000_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-vstms.c

@@ -165,5 +165,4 @@ MACHINE_START(VSTMS, "VSTMS")
 	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
 	.init_time	= vstms_init_time,
-	.restart	= s3c2412_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/s3c2410.c

@@ -42,7 +42,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/watchdog-reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -135,15 +134,3 @@ int __init s3c2410a_init(void)
 	s3c2410_dev.bus = &s3c2410a_subsys;
 	return s3c2410_init();
 }
-
-void s3c2410_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT) {
-		soft_restart(0);
-	}
-
-	samsung_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}

arch/arm/mach-s3c24xx/s3c2412.c

@@ -48,9 +48,6 @@
 #include "regs-dsc.h"
 #include "s3c2412-power.h"
 
-#define S3C2412_SWRST			(S3C24XX_VA_CLKPWR + 0x30)
-#define S3C2412_SWRST_RESET		(0x533C2412)
-
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
 
@@ -128,26 +125,6 @@ static void s3c2412_idle(void)
 	cpu_do_idle();
 }
 
-void s3c2412_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT)
-		soft_restart(0);
-
-	/* errata "Watch-dog/Software Reset Problem" specifies that
-	 * this reset must be done with the SYSCLK sourced from
-	 * EXTCLK instead of FOUT to avoid a glitch in the reset
-	 * mechanism.
-	 *
-	 * See the watchdog section of the S3C2412 manual for more
-	 * information on this fix.
-	 */
-
-	__raw_writel(0x00, S3C2412_CLKSRC);
-	__raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST);
-
-	mdelay(1);
-}
-
 /* s3c2412_map_io
  *
  * register the standard cpu IO areas, and any passed in from the

arch/arm/mach-s3c24xx/s3c2416.c

@@ -81,14 +81,6 @@ static struct device s3c2416_dev = {
 	.bus		= &s3c2416_subsys,
 };
 
-void s3c2416_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT)
-		soft_restart(0);
-
-	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
-}
-
 int __init s3c2416_init(void)
 {
 	printk(KERN_INFO "S3C2416: Initializing architecture\n");

arch/arm/mach-s3c24xx/s3c2443.c

@@ -61,14 +61,6 @@ static struct device s3c2443_dev = {
 	.bus		= &s3c2443_subsys,
 };
 
-void s3c2443_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT)
-		soft_restart(0);
-
-	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
-}
-
 int __init s3c2443_init(void)
 {
 	printk("S3C2443: Initialising architecture\n");

arch/arm/mach-s3c24xx/s3c244x.c

@@ -42,7 +42,6 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/nand-core.h>
-#include <plat/watchdog-reset.h>
 
 #include "common.h"
 #include "regs-dsc.h"
@@ -137,14 +136,3 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
 	.suspend	= s3c244x_suspend,
 	.resume		= s3c244x_resume,
 };
-
-void s3c244x_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT)
-		soft_restart(0);
-
-	samsung_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}

arch/arm/mach-s5pv210/pm.c

@@ -24,9 +24,8 @@
 
 #include <plat/pm-common.h>
 
-#include <mach/regs-clock.h>
-
 #include "common.h"
+#include "regs-clock.h"
 
 static struct sleep_save s5pv210_core_save[] = {
 	/* Clock ETC */

arch/arm/mach-s5pv210/include/mach/regs-clock.h → arch/arm/mach-s5pv210/regs-clock.h

@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/regs-clock.h
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *

arch/arm/mach-s5pv210/s5pv210.c

@@ -18,9 +18,9 @@
 #include <asm/system_misc.h>
 
 #include <plat/map-base.h>
-#include <mach/regs-clock.h>
 
 #include "common.h"
+#include "regs-clock.h"
 
 static int __init s5pv210_fdt_map_sys(unsigned long node, const char *uname,
 					int depth, void *data)