Kaynağa Gözat

staging: fbtft: Use standard MIPI DCS command defines for ili9340

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes 9 yıl önce
ebeveyn
işleme
261a984c88
1 değiştirilmiş dosya ile 12 ekleme ve 14 silme
  1. 12 14
      drivers/staging/fbtft/fb_ili9340.c

+ 12 - 14
drivers/staging/fbtft/fb_ili9340.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -53,7 +54,7 @@ static int init_display(struct fbtft_par *par)
 
 	/* COLMOD: Pixel Format Set */
 	/* 16 bits/pixel */
-	write_reg(par, 0x3A, 0x55);
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
 
 	/* Frame Rate Control */
 	/* Division ratio = fosc, Frame Rate = 79Hz */
@@ -65,8 +66,8 @@ static int init_display(struct fbtft_par *par)
 	/* Gamma Function Disable */
 	write_reg(par, 0xF2, 0x00);
 
-	/* Gamma curve selected  */
-	write_reg(par, 0x26, 0x01);
+	/* Gamma curve selection */
+	write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
 
 	/* Positive Gamma Correction */
 	write_reg(par, 0xE0,
@@ -78,27 +79,24 @@ static int init_display(struct fbtft_par *par)
 		0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31, 0xC1,
 		0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F);
 
-	/* Sleep OUT */
-	write_reg(par, 0x11);
+	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
 
 	mdelay(120);
 
-	/* Display ON */
-	write_reg(par, 0x29);
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 
 	return 0;
 }
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column address */
-	write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
 
-	/* Row address */
-	write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 #define ILI9340_MADCTL_MV  0x20
@@ -123,7 +121,7 @@ static int set_var(struct fbtft_par *par)
 		break;
 	}
 	/* Memory Access Control  */
-	write_reg(par, 0x36, val | (par->bgr << 3));
+	write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, val | (par->bgr << 3));
 
 	return 0;
 }