Parcourir la source

staging: fbtft: Use standard MIPI DCS command defines for ili9340

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Priit Laes il y a 9 ans
Parent
commit
261a984c88
1 fichiers modifiés avec 12 ajouts et 14 suppressions
  1. 12 14
      drivers/staging/fbtft/fb_ili9340.c

+ 12 - 14
drivers/staging/fbtft/fb_ili9340.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -53,7 +54,7 @@ static int init_display(struct fbtft_par *par)
 
 	/* COLMOD: Pixel Format Set */
 	/* 16 bits/pixel */
-	write_reg(par, 0x3A, 0x55);
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
 
 	/* Frame Rate Control */
 	/* Division ratio = fosc, Frame Rate = 79Hz */
@@ -65,8 +66,8 @@ static int init_display(struct fbtft_par *par)
 	/* Gamma Function Disable */
 	write_reg(par, 0xF2, 0x00);
 
-	/* Gamma curve selected  */
-	write_reg(par, 0x26, 0x01);
+	/* Gamma curve selection */
+	write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
 
 	/* Positive Gamma Correction */
 	write_reg(par, 0xE0,
@@ -78,27 +79,24 @@ static int init_display(struct fbtft_par *par)
 		0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31, 0xC1,
 		0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F);
 
-	/* Sleep OUT */
-	write_reg(par, 0x11);
+	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
 
 	mdelay(120);
 
-	/* Display ON */
-	write_reg(par, 0x29);
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 
 	return 0;
 }
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column address */
-	write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
 
-	/* Row address */
-	write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 #define ILI9340_MADCTL_MV  0x20
@@ -123,7 +121,7 @@ static int set_var(struct fbtft_par *par)
 		break;
 	}
 	/* Memory Access Control  */
-	write_reg(par, 0x36, val | (par->bgr << 3));
+	write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, val | (par->bgr << 3));
 
 	return 0;
 }