Merge tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Another round of -misc stuff:
- Noralf debugfs cleanup cleanup (not yet everything, some more driver
  patches awaiting acks).
- More doc work.
- edid/infoframe fixes from Ville.
- misc 1-patch fixes all over, as usual

Noralf needs this for his tinydrm pull request.

* tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
  drm/vc4: Remove vc4_debugfs_cleanup()
  dma/fence: Export enable-signaling tracepoint for emission by drivers
  drm/tilcdc: Remove tilcdc_debugfs_cleanup()
  drm/tegra: Remove tegra_debugfs_cleanup()
  drm/sti: Remove drm_debugfs_remove_files() calls
  drm/radeon: Remove drm_debugfs_remove_files() call
  drm/omap: Remove omap_debugfs_cleanup()
  drm/hdlcd: Remove hdlcd_debugfs_cleanup()
  drm/etnaviv: Remove etnaviv_debugfs_cleanup()
  drm/etnaviv: allow build with COMPILE_TEST
  drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
  drm/prime: Clarify DMA-BUF/GEM Object lifetime
  drm/ttm: Make sure BOs being swapped out are cacheable
  drm/atomic: Remove drm_atomic_debugfs_cleanup()
  drm: drm_minor_register(): Clean up debugfs on failure
  drm: debugfs: Remove all files automatically on cleanup
  drm/fourcc: add vivante tiled layout format modifiers
  drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
  drm/edid: Set AVI infoframe Q even when QS=0
  drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
  ...

Documentation/gpu/drm-kms.rst

@@ -48,11 +48,17 @@ CRTC Abstraction
 ================
 
 .. kernel-doc:: drivers/gpu/drm/drm_crtc.c
-   :export:
+   :doc: overview
+
+CRTC Functions Reference
+--------------------------------
 
 .. kernel-doc:: include/drm/drm_crtc.h
    :internal:
 
+.. kernel-doc:: drivers/gpu/drm/drm_crtc.c
+   :export:
+
 Frame Buffer Abstraction
 ========================
 

drivers/dma-buf/dma-fence.c

@@ -28,6 +28,7 @@
 
 EXPORT_TRACEPOINT_SYMBOL(dma_fence_annotate_wait_on);
 EXPORT_TRACEPOINT_SYMBOL(dma_fence_emit);
+EXPORT_TRACEPOINT_SYMBOL(dma_fence_enable_signal);
 
 /*
  * fence context counter: each execution context should have its own

drivers/gpu/drm/amd/amdgpu/amdgpu.h

@@ -1133,7 +1133,6 @@ int amdgpu_debugfs_fence_init(struct amdgpu_device *adev);
 
 #if defined(CONFIG_DEBUG_FS)
 int amdgpu_debugfs_init(struct drm_minor *minor);
-void amdgpu_debugfs_cleanup(struct drm_minor *minor);
 #endif
 
 int amdgpu_debugfs_firmware_init(struct amdgpu_device *adev);

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c

@@ -1852,8 +1852,6 @@ failed:
 	return r;
 }
 
-static void amdgpu_debugfs_remove_files(struct amdgpu_device *adev);
-
 /**
  * amdgpu_device_fini - tear down the driver
  *
@@ -1893,7 +1891,6 @@ void amdgpu_device_fini(struct amdgpu_device *adev)
 	if (adev->asic_type >= CHIP_BONAIRE)
 		amdgpu_doorbell_fini(adev);
 	amdgpu_debugfs_regs_cleanup(adev);
-	amdgpu_debugfs_remove_files(adev);
 }
 
 
@@ -2507,19 +2504,6 @@ int amdgpu_debugfs_add_files(struct amdgpu_device *adev,
 	return 0;
 }
 
-static void amdgpu_debugfs_remove_files(struct amdgpu_device *adev)
-{
-#if defined(CONFIG_DEBUG_FS)
-	unsigned i;
-
-	for (i = 0; i < adev->debugfs_count; i++) {
-		drm_debugfs_remove_files(adev->debugfs[i].files,
-					 adev->debugfs[i].num_files,
-					 adev->ddev->primary);
-	}
-#endif
-}
-
 #if defined(CONFIG_DEBUG_FS)
 
 static ssize_t amdgpu_debugfs_regs_read(struct file *f, char __user *buf,
@@ -3153,10 +3137,6 @@ int amdgpu_debugfs_init(struct drm_minor *minor)
 {
 	return 0;
 }
-
-void amdgpu_debugfs_cleanup(struct drm_minor *minor)
-{
-}
 #else
 static int amdgpu_debugfs_regs_init(struct amdgpu_device *adev)
 {

drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c

@@ -686,7 +686,6 @@ static struct drm_driver kms_driver = {
 	    DRIVER_USE_AGP |
 	    DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM |
 	    DRIVER_PRIME | DRIVER_RENDER | DRIVER_MODESET,
-	.dev_priv_size = 0,
 	.load = amdgpu_driver_load_kms,
 	.open = amdgpu_driver_open_kms,
 	.preclose = amdgpu_driver_preclose_kms,
@@ -701,7 +700,6 @@ static struct drm_driver kms_driver = {
 	.get_scanout_position = amdgpu_get_crtc_scanoutpos,
 #if defined(CONFIG_DEBUG_FS)
 	.debugfs_init = amdgpu_debugfs_init,
-	.debugfs_cleanup = amdgpu_debugfs_cleanup,
 #endif
 	.irq_preinstall = amdgpu_irq_preinstall,
 	.irq_postinstall = amdgpu_irq_postinstall,

drivers/gpu/drm/arm/hdlcd_drv.c

@@ -255,12 +255,6 @@ static int hdlcd_debugfs_init(struct drm_minor *minor)
 	return drm_debugfs_create_files(hdlcd_debugfs_list,
 		ARRAY_SIZE(hdlcd_debugfs_list),	minor->debugfs_root, minor);
 }
-
-static void hdlcd_debugfs_cleanup(struct drm_minor *minor)
-{
-	drm_debugfs_remove_files(hdlcd_debugfs_list,
-		ARRAY_SIZE(hdlcd_debugfs_list), minor);
-}
 #endif
 
 static const struct file_operations fops = {
@@ -303,7 +297,6 @@ static struct drm_driver hdlcd_driver = {
 	.gem_prime_mmap = drm_gem_cma_prime_mmap,
 #ifdef CONFIG_DEBUG_FS
 	.debugfs_init = hdlcd_debugfs_init,
-	.debugfs_cleanup = hdlcd_debugfs_cleanup,
 #endif
 	.fops = &fops,
 	.name = "hdlcd",

drivers/gpu/drm/bridge/dw-hdmi.c

@@ -2060,7 +2060,9 @@ __dw_hdmi_probe(struct platform_device *pdev,
 
 	hdmi->bridge.driver_private = hdmi;
 	hdmi->bridge.funcs = &dw_hdmi_bridge_funcs;
+#ifdef CONFIG_OF
 	hdmi->bridge.of_node = pdev->dev.of_node;
+#endif
 
 	ret = dw_hdmi_fb_registered(hdmi);
 	if (ret)

drivers/gpu/drm/drm_agpsupport.c

@@ -421,6 +421,8 @@ struct drm_agp_head *drm_agp_init(struct drm_device *dev)
 	head->base = head->agp_info.aper_base;
 	return head;
 }
+/* Only exported for i810.ko */
+EXPORT_SYMBOL(drm_agp_init);
 
 /**
  * drm_legacy_agp_clear - Clear AGP resource list

drivers/gpu/drm/drm_atomic.c

@@ -195,8 +195,8 @@ EXPORT_SYMBOL(drm_atomic_state_default_clear);
  * all locks. So someone else could sneak in and change the current modeset
  * configuration. Which means that all the state assembled in @state is no
  * longer an atomic update to the current state, but to some arbitrary earlier
- * state. Which could break assumptions the driver's ->atomic_check likely
- * relies on.
+ * state. Which could break assumptions the driver's
+ * &drm_mode_config_funcs.atomic_check likely relies on.
  *
  * Hence we must clear all cached state and completely start over, using this
  * function.
@@ -456,11 +456,10 @@ drm_atomic_replace_property_blob_from_id(struct drm_crtc *crtc,
  * @property: the property to set
  * @val: the new property value
  *
- * Use this instead of calling crtc->atomic_set_property directly.
- * This function handles generic/core properties and calls out to
- * driver's ->atomic_set_property() for driver properties.  To ensure
- * consistent behavior you must call this function rather than the
- * driver hook directly.
+ * This function handles generic/core properties and calls out to driver's
+ * &drm_crtc_funcs.atomic_set_property for driver properties. To ensure
+ * consistent behavior you must call this function rather than the driver hook
+ * directly.
  *
  * RETURNS:
  * Zero on success, error code on failure
@@ -532,10 +531,10 @@ EXPORT_SYMBOL(drm_atomic_crtc_set_property);
  * @property: the property to set
  * @val: return location for the property value
  *
- * This function handles generic/core properties and calls out to
- * driver's ->atomic_get_property() for driver properties.  To ensure
- * consistent behavior you must call this function rather than the
- * driver hook directly.
+ * This function handles generic/core properties and calls out to driver's
+ * &drm_crtc_funcs.atomic_get_property for driver properties. To ensure
+ * consistent behavior you must call this function rather than the driver hook
+ * directly.
  *
  * RETURNS:
  * Zero on success, error code on failure
@@ -716,11 +715,10 @@ EXPORT_SYMBOL(drm_atomic_get_plane_state);
  * @property: the property to set
  * @val: the new property value
  *
- * Use this instead of calling plane->atomic_set_property directly.
- * This function handles generic/core properties and calls out to
- * driver's ->atomic_set_property() for driver properties.  To ensure
- * consistent behavior you must call this function rather than the
- * driver hook directly.
+ * This function handles generic/core properties and calls out to driver's
+ * &drm_plane_funcs.atomic_set_property for driver properties.  To ensure
+ * consistent behavior you must call this function rather than the driver hook
+ * directly.
  *
  * RETURNS:
  * Zero on success, error code on failure
@@ -791,10 +789,10 @@ EXPORT_SYMBOL(drm_atomic_plane_set_property);
  * @property: the property to set
  * @val: return location for the property value
  *
- * This function handles generic/core properties and calls out to
- * driver's ->atomic_get_property() for driver properties.  To ensure
- * consistent behavior you must call this function rather than the
- * driver hook directly.
+ * This function handles generic/core properties and calls out to driver's
+ * &drm_plane_funcs.atomic_get_property for driver properties.  To ensure
+ * consistent behavior you must call this function rather than the driver hook
+ * directly.
  *
  * RETURNS:
  * Zero on success, error code on failure
@@ -1057,11 +1055,10 @@ EXPORT_SYMBOL(drm_atomic_get_connector_state);
  * @property: the property to set
  * @val: the new property value
  *
- * Use this instead of calling connector->atomic_set_property directly.
- * This function handles generic/core properties and calls out to
- * driver's ->atomic_set_property() for driver properties.  To ensure
- * consistent behavior you must call this function rather than the
- * driver hook directly.
+ * This function handles generic/core properties and calls out to driver's
+ * &drm_connector_funcs.atomic_set_property for driver properties.  To ensure
+ * consistent behavior you must call this function rather than the driver hook
+ * directly.
  *
  * RETURNS:
  * Zero on success, error code on failure
@@ -1136,10 +1133,10 @@ static void drm_atomic_connector_print_state(struct drm_printer *p,
  * @property: the property to set
  * @val: return location for the property value
  *
- * This function handles generic/core properties and calls out to
- * driver's ->atomic_get_property() for driver properties.  To ensure
- * consistent behavior you must call this function rather than the
- * driver hook directly.
+ * This function handles generic/core properties and calls out to driver's
+ * &drm_connector_funcs.atomic_get_property for driver properties.  To ensure
+ * consistent behavior you must call this function rather than the driver hook
+ * directly.
  *
  * RETURNS:
  * Zero on success, error code on failure
@@ -1312,12 +1309,11 @@ EXPORT_SYMBOL(drm_atomic_set_fb_for_plane);
  * implicit or explicit fencing.
  *
  * This function will not set the fence to the state if it was set
- * via explicit fencing interfaces on the atomic ioctl. It will
- * all drope the reference to the fence as we not storing it
- * anywhere.
- *
- * Otherwise, if plane_state->fence is not set this function we
- * just set it with the received implict fence.
+ * via explicit fencing interfaces on the atomic ioctl. In that case it will
+ * drop the reference to the fence as we are not storing it anywhere.
+ * Otherwise, if &drm_plane_state.fence is not set this function we just set it
+ * with the received implicit fence. In both cases this function consumes a
+ * reference for @fence.
  */
 void
 drm_atomic_set_fence_for_plane(struct drm_plane_state *plane_state,
@@ -1616,7 +1612,7 @@ int drm_atomic_commit(struct drm_atomic_state *state)
 EXPORT_SYMBOL(drm_atomic_commit);
 
 /**
- * drm_atomic_nonblocking_commit - atomic&nonblocking configuration commit
+ * drm_atomic_nonblocking_commit - atomic nonblocking commit
  * @state: atomic configuration to check
  *
  * Note that this function can return -EDEADLK if the driver needed to acquire
@@ -1731,13 +1727,6 @@ int drm_atomic_debugfs_init(struct drm_minor *minor)
 			ARRAY_SIZE(drm_atomic_debugfs_list),
 			minor->debugfs_root, minor);
 }
-
-int drm_atomic_debugfs_cleanup(struct drm_minor *minor)
-{
-	return drm_debugfs_remove_files(drm_atomic_debugfs_list,
-					ARRAY_SIZE(drm_atomic_debugfs_list),
-					minor);
-}
 #endif
 
 /*
@@ -1829,10 +1818,10 @@ static int atomic_set_prop(struct drm_atomic_state *state,
  * @plane_mask: plane mask for planes that were updated.
  * @ret: return value, can be -EDEADLK for a retry.
  *
- * Before doing an update plane->old_fb is set to plane->fb,
- * but before dropping the locks old_fb needs to be set to NULL
- * and plane->fb updated. This is a common operation for each
- * atomic update, so this call is split off as a helper.
+ * Before doing an update &drm_plane.old_fb is set to &drm_plane.fb, but before
+ * dropping the locks old_fb needs to be set to NULL and plane->fb updated. This
+ * is a common operation for each atomic update, so this call is split off as a
+ * helper.
  */
 void drm_atomic_clean_old_fb(struct drm_device *dev,
 			     unsigned plane_mask,
@@ -1873,7 +1862,7 @@ EXPORT_SYMBOL(drm_atomic_clean_old_fb);
  * As a contrast, with implicit fencing the kernel keeps track of any
  * ongoing rendering, and automatically ensures that the atomic update waits
  * for any pending rendering to complete. For shared buffers represented with
- * a &struct dma_buf this is tracked in &reservation_object structures.
+ * a &struct dma_buf this is tracked in &struct reservation_object.
  * Implicit syncing is how Linux traditionally worked (e.g. DRI2/3 on X.org),
  * whereas explicit fencing is what Android wants.
  *

drivers/gpu/drm/drm_atomic_helper.c

@@ -458,22 +458,25 @@ mode_fixup(struct drm_atomic_state *state)
  * Check the state object to see if the requested state is physically possible.
  * This does all the crtc and connector related computations for an atomic
  * update and adds any additional connectors needed for full modesets and calls
- * down into ->mode_fixup functions of the driver backend.
- *
- * crtc_state->mode_changed is set when the input mode is changed.
- * crtc_state->connectors_changed is set when a connector is added or
- * removed from the crtc.
- * crtc_state->active_changed is set when crtc_state->active changes,
- * which is used for dpms.
+ * down into &drm_crtc_helper_funcs.mode_fixup and
+ * &drm_encoder_helper_funcs.mode_fixup or
+ * &drm_encoder_helper_funcs.atomic_check functions of the driver backend.
+ *
+ * &drm_crtc_state.mode_changed is set when the input mode is changed.
+ * &drm_crtc_state.connectors_changed is set when a connector is added or
+ * removed from the crtc.  &drm_crtc_state.active_changed is set when
+ * &drm_crtc_state.active changes, which is used for DPMS.
  * See also: drm_atomic_crtc_needs_modeset()
  *
  * IMPORTANT:
  *
- * Drivers which set ->mode_changed (e.g. in their ->atomic_check hooks if a
- * plane update can't be done without a full modeset) _must_ call this function
- * afterwards after that change. It is permitted to call this function multiple
- * times for the same update, e.g. when the ->atomic_check functions depend upon
- * the adjusted dotclock for fifo space allocation and watermark computation.
+ * Drivers which set &drm_crtc_state.mode_changed (e.g. in their
+ * &drm_plane_helper_funcs.atomic_check hooks if a plane update can't be done
+ * without a full modeset) _must_ call this function afterwards after that
+ * change. It is permitted to call this function multiple times for the same
+ * update, e.g. when the &drm_crtc_helper_funcs.atomic_check functions depend
+ * upon the adjusted dotclock for fifo space allocation and watermark
+ * computation.
  *
  * RETURNS:
  * Zero for success or -errno
@@ -584,9 +587,10 @@ EXPORT_SYMBOL(drm_atomic_helper_check_modeset);
  *
  * Check the state object to see if the requested state is physically possible.
  * This does all the plane update related checks using by calling into the
- * ->atomic_check hooks provided by the driver.
+ * &drm_crtc_helper_funcs.atomic_check and &drm_plane_helper_funcs.atomic_check
+ * hooks provided by the driver.
  *
- * It also sets crtc_state->planes_changed to indicate that a crtc has
+ * It also sets &drm_crtc_state.planes_changed to indicate that a crtc has
  * updated planes.
  *
  * RETURNS:
@@ -648,14 +652,15 @@ EXPORT_SYMBOL(drm_atomic_helper_check_planes);
  * Check the state object to see if the requested state is physically possible.
  * Only crtcs and planes have check callbacks, so for any additional (global)
  * checking that a driver needs it can simply wrap that around this function.
- * Drivers without such needs can directly use this as their ->atomic_check()
- * callback.
+ * Drivers without such needs can directly use this as their
+ * &drm_mode_config_funcs.atomic_check callback.
  *
  * This just wraps the two parts of the state checking for planes and modeset
  * state in the default order: First it calls drm_atomic_helper_check_modeset()
  * and then drm_atomic_helper_check_planes(). The assumption is that the
- * ->atomic_check functions depend upon an updated adjusted_mode.clock to
- * e.g. properly compute watermarks.
+ * @drm_plane_helper_funcs.atomic_check and @drm_crtc_helper_funcs.atomic_check
+ * functions depend upon an updated adjusted_mode.clock to e.g. properly compute
+ * watermarks.
  *
  * RETURNS:
  * Zero for success or -errno
@@ -1125,8 +1130,8 @@ EXPORT_SYMBOL(drm_atomic_helper_wait_for_vblanks);
  * drm_atomic_helper_commit_tail - commit atomic update to hardware
  * @old_state: atomic state object with old state structures
  *
- * This is the default implemenation for the ->atomic_commit_tail() hook of the
- * &drm_mode_config_helper_funcs vtable.
+ * This is the default implementation for the
+ * &drm_mode_config_helper_funcs.atomic_commit_tail hook.
  *
  * Note that the default ordering of how the various stages are called is to
  * match the legacy modeset helper library closest. One peculiarity of that is
@@ -1203,8 +1208,8 @@ static void commit_work(struct work_struct *work)
  * drm_atomic_helper_setup_commit() and related functions.
  *
  * Committing the actual hardware state is done through the
- * ->atomic_commit_tail() callback of the &drm_mode_config_helper_funcs vtable,
- * or it's default implementation drm_atomic_helper_commit_tail().
+ * &drm_mode_config_helper_funcs.atomic_commit_tail callback, or it's default
+ * implementation drm_atomic_helper_commit_tail().
  *
  * RETURNS:
  * Zero for success or -errno.
@@ -1357,7 +1362,7 @@ static int stall_checks(struct drm_crtc *crtc, bool nonblock)
 	return ret < 0 ? ret : 0;
 }
 
-void release_crtc_commit(struct completion *completion)
+static void release_crtc_commit(struct completion *completion)
 {
 	struct drm_crtc_commit *commit = container_of(completion,
 						      typeof(*commit),
@@ -1373,14 +1378,15 @@ void release_crtc_commit(struct completion *completion)
  *
  * This function prepares @state to be used by the atomic helper's support for
  * nonblocking commits. Drivers using the nonblocking commit infrastructure
- * should always call this function from their ->atomic_commit hook.
+ * should always call this function from their
+ * &drm_mode_config_funcs.atomic_commit hook.
  *
  * To be able to use this support drivers need to use a few more helper
  * functions. drm_atomic_helper_wait_for_dependencies() must be called before
  * actually committing the hardware state, and for nonblocking commits this call
  * must be placed in the async worker. See also drm_atomic_helper_swap_state()
  * and it's stall parameter, for when a driver's commit hooks look at the
- * ->state pointers of &struct drm_crtc, &drm_plane or &drm_connector directly.
+ * &drm_crtc.state, &drm_plane.state or &drm_connector.state pointer directly.
  *
  * Completion of the hardware commit step must be signalled using
  * drm_atomic_helper_commit_hw_done(). After this step the driver is not allowed
@@ -1489,8 +1495,7 @@ static struct drm_crtc_commit *preceeding_commit(struct drm_crtc *crtc)
  * This function waits for all preceeding commits that touch the same CRTC as
  * @old_state to both be committed to the hardware (as signalled by
  * drm_atomic_helper_commit_hw_done) and executed by the hardware (as signalled
- * by calling drm_crtc_vblank_send_event on the event member of
- * &drm_crtc_state).
+ * by calling drm_crtc_vblank_send_event() on the &drm_crtc_state.event).
  *
  * This is part of the atomic helper support for nonblocking commits, see
  * drm_atomic_helper_setup_commit() for an overview.
@@ -1627,8 +1632,9 @@ EXPORT_SYMBOL(drm_atomic_helper_commit_cleanup_done);
  * @state: atomic state object with new state structures
  *
  * This function prepares plane state, specifically framebuffers, for the new
- * configuration. If any failure is encountered this function will call
- * ->cleanup_fb on any already successfully prepared framebuffer.
+ * configuration, by calling &drm_plane_helper_funcs.prepare_fb. If any failure
+ * is encountered this function will call &drm_plane_helper_funcs.cleanup_fb on
+ * any already successfully prepared framebuffer.
  *
  * Returns:
  * 0 on success, negative error code on failure.
@@ -1708,10 +1714,10 @@ static bool plane_crtc_active(const struct drm_plane_state *state)
  *
  * Drivers may set the NO_DISABLE_AFTER_MODESET flag in @flags if the relevant
  * display controllers require to disable a CRTC's planes when the CRTC is
- * disabled. This function would skip the ->atomic_disable call for a plane if
- * the CRTC of the old plane state needs a modesetting operation. Of course,
- * the drivers need to disable the planes in their CRTC disable callbacks
- * since no one else would do that.
+ * disabled. This function would skip the &drm_plane_helper_funcs.atomic_disable
+ * call for a plane if the CRTC of the old plane state needs a modesetting
+ * operation. Of course, the drivers need to disable the planes in their CRTC
+ * disable callbacks since no one else would do that.
  *
  * The drm_atomic_helper_commit() default implementation doesn't set the
  * ACTIVE_ONLY flag to most closely match the behaviour of the legacy helpers.
@@ -1874,7 +1880,7 @@ EXPORT_SYMBOL(drm_atomic_helper_commit_planes_on_crtc);
  * planes.
  *
  * It is a bug to call this function without having implemented the
- * ->atomic_disable() plane hook.
+ * &drm_plane_helper_funcs.atomic_disable plane hook.
  */
 void
 drm_atomic_helper_disable_planes_on_crtc(struct drm_crtc_state *old_crtc_state,
@@ -1961,8 +1967,8 @@ EXPORT_SYMBOL(drm_atomic_helper_cleanup_planes);
  * contains the old state. Also do any other cleanup required with that state.
  *
  * @stall must be set when nonblocking commits for this driver directly access
- * the ->state pointer of &drm_plane, &drm_crtc or &drm_connector. With the
- * current atomic helpers this is almost always the case, since the helpers
+ * the &drm_plane.state, &drm_crtc.state or &drm_connector.state pointer. With
+ * the current atomic helpers this is almost always the case, since the helpers
  * don't pass the right state structures to the callbacks.
  */
 void drm_atomic_helper_swap_state(struct drm_atomic_state *state,
@@ -2363,7 +2369,7 @@ int __drm_atomic_helper_set_config(struct drm_mode_set *set,
 	if (ret != 0)
 		return ret;
 
-	drm_crtc_get_hv_timing(set->mode, &hdisplay, &vdisplay);
+	drm_mode_get_hv_timing(set->mode, &hdisplay, &vdisplay);
 
 	drm_atomic_set_fb_for_plane(primary_state, set->fb);
 	primary_state->crtc_x = 0;
@@ -2892,8 +2898,8 @@ EXPORT_SYMBOL(drm_atomic_helper_page_flip_target);
  *
  * This is the main helper function provided by the atomic helper framework for
  * implementing the legacy DPMS connector interface. It computes the new desired
- * ->active state for the corresponding CRTC (if the connector is enabled) and
- * updates it.
+ * &drm_crtc_state.active state for the corresponding CRTC (if the connector is
+ * enabled) and updates it.
  *
  * Returns:
  * Returns 0 on success, negative errno numbers on failure.
@@ -2965,11 +2971,11 @@ backoff:
 EXPORT_SYMBOL(drm_atomic_helper_connector_dpms);
 
 /**
- * drm_atomic_helper_best_encoder - Helper for &drm_connector_helper_funcs
- *                                  ->best_encoder callback
+ * drm_atomic_helper_best_encoder - Helper for
+ * 	&drm_connector_helper_funcs.best_encoder callback
  * @connector: Connector control structure
  *
- * This is a &drm_connector_helper_funcs ->best_encoder callback helper for
+ * This is a &drm_connector_helper_funcs.best_encoder callback helper for
  * connectors that support exactly 1 encoder, statically determined at driver
  * init time.
  */
@@ -3003,7 +3009,7 @@ EXPORT_SYMBOL(drm_atomic_helper_best_encoder);
  */
 
 /**
- * drm_atomic_helper_crtc_reset - default ->reset hook for CRTCs
+ * drm_atomic_helper_crtc_reset - default &drm_crtc_funcs.reset hook for CRTCs
  * @crtc: drm CRTC
  *
  * Resets the atomic state for @crtc by freeing the state pointer (which might
@@ -3110,7 +3116,7 @@ void drm_atomic_helper_crtc_destroy_state(struct drm_crtc *crtc,
 EXPORT_SYMBOL(drm_atomic_helper_crtc_destroy_state);
 
 /**
- * drm_atomic_helper_plane_reset - default ->reset hook for planes
+ * drm_atomic_helper_plane_reset - default &drm_plane_funcs.reset hook for planes
  * @plane: drm plane
  *
  * Resets the atomic state for @plane by freeing the state pointer (which might
@@ -3214,8 +3220,9 @@ EXPORT_SYMBOL(drm_atomic_helper_plane_destroy_state);
  * @conn_state: connector state to assign
  *
  * Initializes the newly allocated @conn_state and assigns it to
- * #connector ->state, usually required when initializing the drivers
- * or when called from the ->reset hook.
+ * the &drm_conector->state pointer of @connector, usually required when
+ * initializing the drivers or when called from the &drm_connector_funcs.reset
+ * hook.
  *
  * This is useful for drivers that subclass the connector state.
  */
@@ -3231,7 +3238,7 @@ __drm_atomic_helper_connector_reset(struct drm_connector *connector,
 EXPORT_SYMBOL(__drm_atomic_helper_connector_reset);
 
 /**
- * drm_atomic_helper_connector_reset - default ->reset hook for connectors
+ * drm_atomic_helper_connector_reset - default &drm_connector_funcs.reset hook for connectors
  * @connector: drm connector
  *
  * Resets the atomic state for @connector by freeing the state pointer (which

drivers/gpu/drm/drm_auth.c

@@ -40,8 +40,8 @@
  * least once successfully became the device master (either through the
  * SET_MASTER IOCTL, or implicitly through opening the primary device node when
  * no one else is the current master that time) there exists one &drm_master.
- * This is noted in the is_master member of &drm_file. All other clients have
- * just a pointer to the &drm_master they are associated with.
+ * This is noted in &drm_file.is_master. All other clients have just a pointer
+ * to the &drm_master they are associated with.
  *
  * In addition only one &drm_master can be the current master for a &drm_device.
  * It can be switched through the DROP_MASTER and SET_MASTER IOCTL, or

drivers/gpu/drm/drm_blend.c

@@ -40,9 +40,8 @@
  * sub-pixel accuracy, which is scaled up to a pixel-aligned destination
  * rectangle in the visible area of a &drm_crtc. The visible area of a CRTC is
  * defined by the horizontal and vertical visible pixels (stored in @hdisplay
- * and @vdisplay) of the requested mode (stored in @mode in the
- * &drm_crtc_state). These two rectangles are both stored in the
- * &drm_plane_state.
+ * and @vdisplay) of the requested mode (stored in &drm_crtc_state.mode). These
+ * two rectangles are both stored in the &drm_plane_state.
  *
  * For the atomic ioctl the following standard (atomic) properties on the plane object
  * encode the basic plane composition model:
@@ -215,7 +214,7 @@ EXPORT_SYMBOL(drm_rotation_simplify);
  * for it in drm core. Drivers can then attach this property to planes to enable
  * support for configurable planes arrangement during blending operation.
  * Once mutable zpos property has been enabled, the DRM core will automatically
- * calculate drm_plane_state->normalized_zpos values. Usually min should be set
+ * calculate &drm_plane_state.normalized_zpos values. Usually min should be set
  * to 0 and max to maximal number of planes for given crtc - 1.
  *
  * If zpos of some planes cannot be changed (like fixed background or
@@ -367,8 +366,8 @@ done:
  * For every CRTC this function checks new states of all planes assigned to
  * it and calculates normalized zpos value for these planes. Planes are compared
  * first by their zpos values, then by plane id (if zpos is equal). The plane
- * with lowest zpos value is at the bottom. The plane_state->normalized_zpos is
- * then filled with unique values from 0 to number of active planes in crtc
+ * with lowest zpos value is at the bottom. The &drm_plane_state.normalized_zpos
+ * is then filled with unique values from 0 to number of active planes in crtc
  * minus one.
  *
  * RETURNS

drivers/gpu/drm/drm_cache.c

@@ -29,7 +29,9 @@
  */
 
 #include <linux/export.h>
-#include <drm/drmP.h>
+#include <linux/highmem.h>
+
+#include <drm/drm_cache.h>
 
 #if defined(CONFIG_X86)
 #include <asm/smp.h>

drivers/gpu/drm/drm_connector.c

@@ -38,18 +38,17 @@
  * Hence they are reference-counted using drm_connector_reference() and
  * drm_connector_unreference().
  *
- * KMS driver must create, initialize, register and attach at a struct
- * &drm_connector for each such sink. The instance is created as other KMS
- * objects and initialized by setting the following fields.
- *
- * The connector is then registered with a call to drm_connector_init() with a
- * pointer to the connector functions and a connector type, and exposed through
- * sysfs with a call to drm_connector_register().
+ * KMS driver must create, initialize, register and attach at a &struct
+ * drm_connector for each such sink. The instance is created as other KMS
+ * objects and initialized by setting the following fields. The connector is
+ * initialized with a call to drm_connector_init() with a pointer to the
+ * &struct drm_connector_funcs and a connector type, and then exposed to
+ * userspace with a call to drm_connector_register().
  *
  * Connectors must be attached to an encoder to be used. For devices that map
  * connectors to encoders 1:1, the connector should be attached at
  * initialization time with a call to drm_mode_connector_attach_encoder(). The
- * driver must also set the &struct drm_connector encoder field to point to the
+ * driver must also set the &drm_connector.encoder field to point to the
  * attached encoder.
  *
  * For connectors which are not fixed (like built-in panels) the driver needs to
@@ -497,7 +496,7 @@ static struct lockdep_map connector_list_iter_dep_map = {
  * @dev: DRM device
  * @iter: connector_list iterator
  *
- * Sets @iter up to walk the connector list in &drm_mode_config of @dev. @iter
+ * Sets @iter up to walk the &drm_mode_config.connector_list of @dev. @iter
  * must always be cleaned up again by calling drm_connector_list_iter_put().
  * Iteration itself happens using drm_connector_list_iter_next() or
  * drm_for_each_connector_iter().
@@ -696,8 +695,8 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
  * 	drivers this is only provided for backwards compatibility with existing
  * 	drivers, it remaps to controlling the "ACTIVE" property on the CRTC the
  * 	connector is linked to. Drivers should never set this property directly,
- * 	it is handled by the DRM core by calling the ->dpms() callback in
- * 	&drm_connector_funcs. Atomic drivers should implement this hook using
+ * 	it is handled by the DRM core by calling the &drm_connector_funcs.dpms
+ * 	callback. Atomic drivers should implement this hook using
  * 	drm_atomic_helper_connector_dpms(). This is the only property standard
  * 	connector property that userspace can change.
  * PATH:

drivers/gpu/drm/drm_crtc.c

@@ -46,6 +46,27 @@
 #include "drm_crtc_internal.h"
 #include "drm_internal.h"
 
+/**
+ * DOC: overview
+ *
+ * A CRTC represents the overall display pipeline. It receives pixel data from
+ * &drm_plane and blends them together. The &drm_display_mode is also attached
+ * to the CRTC, specifying display timings. On the output side the data is fed
+ * to one or more &drm_encoder, which are then each connected to one
+ * &drm_connector.
+ *
+ * To create a CRTC, a KMS drivers allocates and zeroes an instances of
+ * &struct drm_crtc (possibly as part of a larger structure) and registers it
+ * with a call to drm_crtc_init_with_planes().
+ *
+ * The CRTC is also the entry point for legacy modeset operations, see
+ * &drm_crtc_funcs.set_config, legacy plane operations, see
+ * &drm_crtc_funcs.page_flip and &drm_crtc_funcs.cursor_set2, and other legacy
+ * operations like &drm_crtc_funcs.gamma_set. For atomic drivers all these
+ * features are controlled through &drm_property and
+ * &drm_mode_config_funcs.atomic_check and &drm_mode_config_funcs.atomic_check.
+ */
+
 /**
  * drm_crtc_from_index - find the registered CRTC at an index
  * @dev: DRM device
@@ -415,11 +436,12 @@ int drm_mode_getcrtc(struct drm_device *dev,
 }
 
 /**
- * drm_mode_set_config_internal - helper to call ->set_config
+ * drm_mode_set_config_internal - helper to call &drm_mode_config_funcs.set_config
  * @set: modeset config to set
  *
- * This is a little helper to wrap internal calls to the ->set_config driver
- * interface. The only thing it adds is correct refcounting dance.
+ * This is a little helper to wrap internal calls to the
+ * &drm_mode_config_funcs.set_config driver interface. The only thing it adds is
+ * correct refcounting dance.
  *
  * Returns:
  * Zero on success, negative errno on failure.
@@ -459,27 +481,6 @@ int drm_mode_set_config_internal(struct drm_mode_set *set)
 }
 EXPORT_SYMBOL(drm_mode_set_config_internal);
 
-/**
- * drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode
- * @mode: mode to query
- * @hdisplay: hdisplay value to fill in
- * @vdisplay: vdisplay value to fill in
- *
- * The vdisplay value will be doubled if the specified mode is a stereo mode of
- * the appropriate layout.
- */
-void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
-			    int *hdisplay, int *vdisplay)
-{
-	struct drm_display_mode adjusted;
-
-	drm_mode_copy(&adjusted, mode);
-	drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY);
-	*hdisplay = adjusted.crtc_hdisplay;
-	*vdisplay = adjusted.crtc_vdisplay;
-}
-EXPORT_SYMBOL(drm_crtc_get_hv_timing);
-
 /**
  * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
  *     CRTC viewport
@@ -497,7 +498,7 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc,
 {
 	int hdisplay, vdisplay;
 
-	drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
+	drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay);
 
 	if (crtc->state &&
 	    drm_rotation_90_or_270(crtc->primary->state->rotation))

drivers/gpu/drm/drm_crtc_helper.c

@@ -53,9 +53,9 @@
  * configuration on resume with drm_helper_resume_force_mode().
  *
  * Note that this helper library doesn't track the current power state of CRTCs
- * and encoders. It can call callbacks like ->dpms() even though the hardware is
- * already in the desired state. This deficiency has been fixed in the atomic
- * helpers.
+ * and encoders. It can call callbacks like &drm_encoder_helper_funcs.dpms even
+ * though the hardware is already in the desired state. This deficiency has been
+ * fixed in the atomic helpers.
  *
  * The driver callbacks are mostly compatible with the atomic modeset helpers,
  * except for the handling of the primary plane: Atomic helpers require that the
@@ -477,12 +477,12 @@ drm_crtc_helper_disable(struct drm_crtc *crtc)
  * drm_crtc_helper_set_config - set a new config from userspace
  * @set: mode set configuration
  *
- * The drm_crtc_helper_set_config() helper function implements the set_config
- * callback of &struct drm_crtc_funcs for drivers using the legacy CRTC helpers.
+ * The drm_crtc_helper_set_config() helper function implements the of
+ * &drm_crtc_funcs.set_config callback for drivers using the legacy CRTC
+ * helpers.
  *
  * It first tries to locate the best encoder for each connector by calling the
- * connector ->best_encoder() (&struct drm_connector_helper_funcs) helper
- * operation.
+ * connector @drm_connector_helper_funcs.best_encoder helper operation.
  *
  * After locating the appropriate encoders, the helper function will call the
  * mode_fixup encoder and CRTC helper operations to adjust the requested mode,
@@ -493,8 +493,7 @@ drm_crtc_helper_disable(struct drm_crtc *crtc)
  *
  * If the adjusted mode is identical to the current mode but changes to the
  * frame buffer need to be applied, the drm_crtc_helper_set_config() function
- * will call the CRTC ->mode_set_base() (&struct drm_crtc_helper_funcs) helper
- * operation.
+ * will call the CRTC &drm_crtc_helper_funcs.mode_set_base helper operation.
  *
  * If the adjusted mode differs from the current mode, or if the
  * ->mode_set_base() helper operation is not provided, the helper function
@@ -851,14 +850,15 @@ static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
  * @connector: affected connector
  * @mode: DPMS mode
  *
- * The drm_helper_connector_dpms() helper function implements the ->dpms()
- * callback of &struct drm_connector_funcs for drivers using the legacy CRTC helpers.
+ * The drm_helper_connector_dpms() helper function implements the
+ * &drm_connector_funcs.dpms callback for drivers using the legacy CRTC
+ * helpers.
  *
  * This is the main helper function provided by the CRTC helper framework for
  * implementing the DPMS connector attribute. It computes the new desired DPMS
- * state for all encoders and CRTCs in the output mesh and calls the ->dpms()
- * callbacks provided by the driver in &struct drm_crtc_helper_funcs and struct
- * &drm_encoder_helper_funcs appropriately.
+ * state for all encoders and CRTCs in the output mesh and calls the
+ * &drm_crtc_helper_funcs.dpms and &drm_encoder_helper_funcs.dpms callbacks
+ * provided by the driver.
  *
  * This function is deprecated.  New drivers must implement atomic modeset
  * support, for which this function is unsuitable. Instead drivers should use

drivers/gpu/drm/drm_crtc_internal.h

@@ -177,7 +177,6 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev,
 #ifdef CONFIG_DEBUG_FS
 struct drm_minor;
 int drm_atomic_debugfs_init(struct drm_minor *minor);
-int drm_atomic_debugfs_cleanup(struct drm_minor *minor);
 #endif
 
 int drm_atomic_get_property(struct drm_mode_object *obj,

drivers/gpu/drm/drm_debugfs.c

@@ -81,7 +81,8 @@ static const struct file_operations drm_debugfs_fops = {
  * \return Zero on success, non-zero on failure
  *
  * Create a given set of debugfs files represented by an array of
- * gdm_debugfs_lists in the given root directory.
+ * &drm_info_list in the given root directory. These files will be removed
+ * automatically on drm_debugfs_cleanup().
  */
 int drm_debugfs_create_files(const struct drm_info_list *files, int count,
 			     struct dentry *root, struct drm_minor *minor)
@@ -218,6 +219,19 @@ int drm_debugfs_remove_files(const struct drm_info_list *files, int count,
 }
 EXPORT_SYMBOL(drm_debugfs_remove_files);
 
+static void drm_debugfs_remove_all_files(struct drm_minor *minor)
+{
+	struct drm_info_node *node, *tmp;
+
+	mutex_lock(&minor->debugfs_lock);
+	list_for_each_entry_safe(node, tmp, &minor->debugfs_list, list) {
+		debugfs_remove(node->dent);
+		list_del(&node->list);
+		kfree(node);
+	}
+	mutex_unlock(&minor->debugfs_lock);
+}
+
 /**
  * Cleanup the debugfs filesystem resources.
  *
@@ -229,7 +243,6 @@ EXPORT_SYMBOL(drm_debugfs_remove_files);
 int drm_debugfs_cleanup(struct drm_minor *minor)
 {
 	struct drm_device *dev = minor->dev;
-	int ret;
 
 	if (!minor->debugfs_root)
 		return 0;
@@ -237,17 +250,9 @@ int drm_debugfs_cleanup(struct drm_minor *minor)
 	if (dev->driver->debugfs_cleanup)
 		dev->driver->debugfs_cleanup(minor);
 
-	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
-		ret = drm_atomic_debugfs_cleanup(minor);
-		if (ret) {
-			DRM_ERROR("DRM: Failed to remove atomic debugfs entries\n");
-			return ret;
-		}
-	}
-
-	drm_debugfs_remove_files(drm_debugfs_list, DRM_DEBUGFS_ENTRIES, minor);
+	drm_debugfs_remove_all_files(minor);
 
-	debugfs_remove(minor->debugfs_root);
+	debugfs_remove_recursive(minor->debugfs_root);
 	minor->debugfs_root = NULL;
 
 	return 0;

drivers/gpu/drm/drm_dp_helper.c

@@ -725,7 +725,7 @@ MODULE_PARM_DESC(dp_aux_i2c_speed_khz,
 /*
  * Transfer a single I2C-over-AUX message and handle various error conditions,
  * retrying the transaction as appropriate.  It is assumed that the
- * aux->transfer function does not modify anything in the msg other than the
+ * &drm_dp_aux.transfer function does not modify anything in the msg other than the
  * reply field.
  *
  * Returns bytes transferred on success, or a negative error code on failure.

drivers/gpu/drm/drm_dp_mst_topology.c

@@ -1086,7 +1086,7 @@ static void build_mst_prop_path(const struct drm_dp_mst_branch *mstb,
 }
 
 static void drm_dp_add_port(struct drm_dp_mst_branch *mstb,
-			    struct device *dev,
+			    struct drm_device *dev,
 			    struct drm_dp_link_addr_reply_port *port_msg)
 {
 	struct drm_dp_mst_port *port;
@@ -1104,7 +1104,7 @@ static void drm_dp_add_port(struct drm_dp_mst_branch *mstb,
 		port->port_num = port_msg->port_number;
 		port->mgr = mstb->mgr;
 		port->aux.name = "DPMST";
-		port->aux.dev = dev;
+		port->aux.dev = dev->dev;
 		created = true;
 	} else {
 		old_pdt = port->pdt;
@@ -2949,7 +2949,7 @@ static void drm_dp_destroy_connector_work(struct work_struct *work)
  * Return 0 for success, or negative error code on failure
  */
 int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr,
-				 struct device *dev, struct drm_dp_aux *aux,
+				 struct drm_device *dev, struct drm_dp_aux *aux,
 				 int max_dpcd_transaction_bytes,
 				 int max_payloads, int conn_base_id)
 {

drivers/gpu/drm/drm_drv.c

@@ -221,7 +221,7 @@ static int drm_minor_register(struct drm_device *dev, unsigned int type)
 	ret = drm_debugfs_init(minor, minor->index, drm_debugfs_root);
 	if (ret) {
 		DRM_ERROR("DRM: Failed to initialize /sys/kernel/debug/dri.\n");
-		return ret;
+		goto err_debugfs;
 	}
 
 	ret = device_add(minor->kdev);
@@ -309,7 +309,7 @@ void drm_minor_release(struct drm_minor *minor)
  * userspace the device instance can be published using drm_dev_register().
  *
  * There is also deprecated support for initalizing device instances using
- * bus-specific helpers and the ->load() callback. But due to
+ * bus-specific helpers and the &drm_driver.load callback. But due to
  * backwards-compatibility needs the device instance have to be published too
  * early, which requires unpretty global locking to make safe and is therefore
  * only support for existing drivers not yet converted to the new scheme.
@@ -720,9 +720,9 @@ static void remove_compat_control_link(struct drm_device *dev)
  * Never call this twice on any device!
  *
  * NOTE: To ensure backward compatibility with existing drivers method this
- * function calls the ->load() method after registering the device nodes,
- * creating race conditions. Usage of the ->load() methods is therefore
- * deprecated, drivers must perform all initialization before calling
+ * function calls the &drm_driver.load method after registering the device
+ * nodes, creating race conditions. Usage of the &drm_driver.load methods is
+ * therefore deprecated, drivers must perform all initialization before calling
  * drm_dev_register().
  *
  * RETURNS:

drivers/gpu/drm/drm_dumb_buffers.c

@@ -42,8 +42,8 @@
  * create dumb buffers suitable for scanout, which can then be used to create
  * KMS frame buffers.
  *
- * To support dumb objects drivers must implement the dumb_create,
- * dumb_destroy and dumb_map_offset operations from &struct drm_driver. See
+ * To support dumb objects drivers must implement the &drm_driver.dumb_create,
+ * &drm_driver.dumb_destroy and &drm_driver.dumb_map_offset operations. See
  * there for further details.
  *
  * Note that dumb objects may not be used for gpu acceleration, as has been

drivers/gpu/drm/drm_edid.c

@@ -3768,6 +3768,25 @@ bool drm_rgb_quant_range_selectable(struct edid *edid)
 }
 EXPORT_SYMBOL(drm_rgb_quant_range_selectable);
 
+/**
+ * drm_default_rgb_quant_range - default RGB quantization range
+ * @mode: display mode
+ *
+ * Determine the default RGB quantization range for the mode,
+ * as specified in CEA-861.
+ *
+ * Return: The default RGB quantization range for the mode
+ */
+enum hdmi_quantization_range
+drm_default_rgb_quant_range(const struct drm_display_mode *mode)
+{
+	/* All CEA modes other than VIC 1 use limited quantization range. */
+	return drm_match_cea_mode(mode) > 1 ?
+		HDMI_QUANTIZATION_RANGE_LIMITED :
+		HDMI_QUANTIZATION_RANGE_FULL;
+}
+EXPORT_SYMBOL(drm_default_rgb_quant_range);
+
 static void drm_parse_hdmi_deep_color_info(struct drm_connector *connector,
 					   const u8 *hdmi)
 {
@@ -4273,6 +4292,52 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
 }
 EXPORT_SYMBOL(drm_hdmi_avi_infoframe_from_display_mode);
 
+/**
+ * drm_hdmi_avi_infoframe_quant_range() - fill the HDMI AVI infoframe
+ *                                        quantization range information
+ * @frame: HDMI AVI infoframe
+ * @mode: DRM display mode
+ * @rgb_quant_range: RGB quantization range (Q)
+ * @rgb_quant_range_selectable: Sink support selectable RGB quantization range (QS)
+ */
+void
+drm_hdmi_avi_infoframe_quant_range(struct hdmi_avi_infoframe *frame,
+				   const struct drm_display_mode *mode,
+				   enum hdmi_quantization_range rgb_quant_range,
+				   bool rgb_quant_range_selectable)
+{
+	/*
+	 * CEA-861:
+	 * "A Source shall not send a non-zero Q value that does not correspond
+	 *  to the default RGB Quantization Range for the transmitted Picture
+	 *  unless the Sink indicates support for the Q bit in a Video
+	 *  Capabilities Data Block."
+	 *
+	 * HDMI 2.0 recommends sending non-zero Q when it does match the
+	 * default RGB quantization range for the mode, even when QS=0.
+	 */
+	if (rgb_quant_range_selectable ||
+	    rgb_quant_range == drm_default_rgb_quant_range(mode))
+		frame->quantization_range = rgb_quant_range;
+	else
+		frame->quantization_range = HDMI_QUANTIZATION_RANGE_DEFAULT;
+
+	/*
+	 * CEA-861-F:
+	 * "When transmitting any RGB colorimetry, the Source should set the
+	 *  YQ-field to match the RGB Quantization Range being transmitted
+	 *  (e.g., when Limited Range RGB, set YQ=0 or when Full Range RGB,
+	 *  set YQ=1) and the Sink shall ignore the YQ-field."
+	 */
+	if (rgb_quant_range == HDMI_QUANTIZATION_RANGE_LIMITED)
+		frame->ycc_quantization_range =
+			HDMI_YCC_QUANTIZATION_RANGE_LIMITED;
+	else
+		frame->ycc_quantization_range =
+			HDMI_YCC_QUANTIZATION_RANGE_FULL;
+}
+EXPORT_SYMBOL(drm_hdmi_avi_infoframe_quant_range);
+
 static enum hdmi_3d_structure
 s3d_structure_from_display_mode(const struct drm_display_mode *mode)
 {

drivers/gpu/drm/drm_encoder.c

@@ -98,7 +98,7 @@ void drm_encoder_unregister_all(struct drm_device *dev)
  *
  * Initialises a preallocated encoder. Encoder should be subclassed as part of
  * driver encoder objects. At driver unload time drm_encoder_cleanup() should be
- * called from the driver's destroy hook in &drm_encoder_funcs.
+ * called from the driver's &drm_encoder_funcs.destroy hook.
  *
  * Returns:
  * Zero on success, error code on failure.

drivers/gpu/drm/drm_encoder_slave.c

@@ -43,7 +43,7 @@
  * &drm_encoder_slave. The @slave_funcs field will be initialized with
  * the hooks provided by the slave driver.
  *
- * If @info->platform_data is non-NULL it will be used as the initial
+ * If @info.platform_data is non-NULL it will be used as the initial
  * slave config.
  *
  * Returns 0 on success or a negative errno on failure, in particular,

drivers/gpu/drm/drm_fb_cma_helper.c

@@ -622,3 +622,21 @@ void drm_fbdev_cma_set_suspend(struct drm_fbdev_cma *fbdev_cma, int state)
 		drm_fb_helper_set_suspend(&fbdev_cma->fb_helper, state);
 }
 EXPORT_SYMBOL(drm_fbdev_cma_set_suspend);
+
+/**
+ * drm_fbdev_cma_set_suspend_unlocked - wrapper around
+ *                                      drm_fb_helper_set_suspend_unlocked
+ * @fbdev_cma: The drm_fbdev_cma struct, may be NULL
+ * @state: desired state, zero to resume, non-zero to suspend
+ *
+ * Calls drm_fb_helper_set_suspend, which is a wrapper around
+ * fb_set_suspend implemented by fbdev core.
+ */
+void drm_fbdev_cma_set_suspend_unlocked(struct drm_fbdev_cma *fbdev_cma,
+					int state)
+{
+	if (fbdev_cma)
+		drm_fb_helper_set_suspend_unlocked(&fbdev_cma->fb_helper,
+						   state);
+}
+EXPORT_SYMBOL(drm_fbdev_cma_set_suspend_unlocked);

drivers/gpu/drm/drm_fb_helper.c

@@ -66,11 +66,11 @@ static DEFINE_MUTEX(kernel_fb_helper_lock);
  * Teardown is done with drm_fb_helper_fini().
  *
  * At runtime drivers should restore the fbdev console by calling
- * drm_fb_helper_restore_fbdev_mode_unlocked() from their ->lastclose callback.
- * They should also notify the fb helper code from updates to the output
- * configuration by calling drm_fb_helper_hotplug_event(). For easier
+ * drm_fb_helper_restore_fbdev_mode_unlocked() from their &drm_driver.lastclose
+ * callback.  They should also notify the fb helper code from updates to the
+ * output configuration by calling drm_fb_helper_hotplug_event(). For easier
  * integration with the output polling code in drm_crtc_helper.c the modeset
- * code provides a ->output_poll_changed callback.
+ * code provides a &drm_mode_config_funcs.output_poll_changed callback.
  *
  * All other functions exported by the fb helper library can be used to
  * implement the fbdev driver interface by the driver.
@@ -79,7 +79,7 @@ static DEFINE_MUTEX(kernel_fb_helper_lock);
  * hotplug detection using the fbdev helpers. The drm_fb_helper_prepare()
  * helper must be called first to initialize the minimum required to make
  * hotplug detection work. Drivers also need to make sure to properly set up
- * the dev->mode_config.funcs member. After calling drm_kms_helper_poll_init()
+ * the &drm_mode_config.funcs member. After calling drm_kms_helper_poll_init()
  * it is safe to enable interrupts and start processing hotplug events. At the
  * same time, drivers should initialize all modeset objects such as CRTCs,
  * encoders and connectors. To finish up the fbdev helper initialization, the
@@ -88,9 +88,9 @@ static DEFINE_MUTEX(kernel_fb_helper_lock);
  * should call drm_fb_helper_single_add_all_connectors() followed by
  * drm_fb_helper_initial_config().
  *
- * If &drm_framebuffer_funcs ->dirty is set, the
+ * If &drm_framebuffer_funcs.dirty is set, the
  * drm_fb_helper_{cfb,sys}_{write,fillrect,copyarea,imageblit} functions will
- * accumulate changes and schedule &drm_fb_helper ->dirty_work to run right
+ * accumulate changes and schedule &drm_fb_helper.dirty_work to run right
  * away. This worker then calls the dirty() function ensuring that it will
  * always run in process context since the fb_*() function could be running in
  * atomic context. If drm_fb_helper_deferred_io() is used as the deferred_io
@@ -247,7 +247,7 @@ static void drm_fb_helper_restore_lut_atomic(struct drm_crtc *crtc)
 }
 
 /**
- * drm_fb_helper_debug_enter - implementation for ->fb_debug_enter
+ * drm_fb_helper_debug_enter - implementation for &fb_ops.fb_debug_enter
  * @info: fbdev registered by the helper
  */
 int drm_fb_helper_debug_enter(struct fb_info *info)
@@ -296,7 +296,7 @@ static struct drm_framebuffer *drm_mode_config_fb(struct drm_crtc *crtc)
 }
 
 /**
- * drm_fb_helper_debug_leave - implementation for ->fb_debug_leave
+ * drm_fb_helper_debug_leave - implementation for &fb_ops.fb_debug_leave
  * @info: fbdev registered by the helper
  */
 int drm_fb_helper_debug_leave(struct fb_info *info)
@@ -445,7 +445,7 @@ static int restore_fbdev_mode(struct drm_fb_helper *fb_helper)
  * drm_fb_helper_restore_fbdev_mode_unlocked - restore fbdev configuration
  * @fb_helper: fbcon to restore
  *
- * This should be called from driver's drm ->lastclose callback
+ * This should be called from driver's drm &drm_driver.lastclose callback
  * when implementing an fbcon on top of kms using this helper. This ensures that
  * the user isn't greeted with a black screen when e.g. X dies.
  *
@@ -585,7 +585,7 @@ static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode)
 }
 
 /**
- * drm_fb_helper_blank - implementation for ->fb_blank
+ * drm_fb_helper_blank - implementation for &fb_ops.fb_blank
  * @blank: desired blanking state
  * @info: fbdev registered by the helper
  */
@@ -912,7 +912,7 @@ static void drm_fb_helper_dirty(struct fb_info *info, u32 x, u32 y,
  * @info: fb_info struct pointer
  * @pagelist: list of dirty mmap framebuffer pages
  *
- * This function is used as the &fb_deferred_io ->deferred_io
+ * This function is used as the &fb_deferred_io.deferred_io
  * callback function for flushing the fbdev mmap writes.
  */
 void drm_fb_helper_deferred_io(struct fb_info *info,
@@ -1103,7 +1103,7 @@ EXPORT_SYMBOL(drm_fb_helper_set_suspend);
  * due to all the printk activity.
  *
  * This function can be called multiple times with the same state since
- * &fb_info->state is checked to see if fbdev is running or not before locking.
+ * &fb_info.state is checked to see if fbdev is running or not before locking.
  *
  * Use drm_fb_helper_set_suspend() if you need to take the lock yourself.
  */
@@ -1181,7 +1181,7 @@ static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green,
 }
 
 /**
- * drm_fb_helper_setcmap - implementation for ->fb_setcmap
+ * drm_fb_helper_setcmap - implementation for &fb_ops.fb_setcmap
  * @cmap: cmap to set
  * @info: fbdev registered by the helper
  */
@@ -1238,7 +1238,7 @@ int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info)
 EXPORT_SYMBOL(drm_fb_helper_setcmap);
 
 /**
- * drm_fb_helper_check_var - implementation for ->fb_check_var
+ * drm_fb_helper_check_var - implementation for &fb_ops.fb_check_var
  * @var: screeninfo to check
  * @info: fbdev registered by the helper
  */
@@ -1338,7 +1338,7 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
 EXPORT_SYMBOL(drm_fb_helper_check_var);
 
 /**
- * drm_fb_helper_set_par - implementation for ->fb_set_par
+ * drm_fb_helper_set_par - implementation for &fb_ops.fb_set_par
  * @info: fbdev registered by the helper
  *
  * This will let fbcon do the mode init and is called at initialization time by
@@ -1422,7 +1422,7 @@ backoff:
 }
 
 /**
- * drm_fb_helper_pan_display - implementation for ->fb_pan_display
+ * drm_fb_helper_pan_display - implementation for &fb_ops.fb_pan_display
  * @var: updated screen information
  * @info: fbdev registered by the helper
  */
@@ -1607,7 +1607,7 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,
  * additional constraints need to set up their own limits.
  *
  * Drivers should call this (or their equivalent setup code) from their
- * ->fb_probe callback.
+ * &drm_fb_helper_funcs.fb_probe callback.
  */
 void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
 			    uint32_t depth)
@@ -1636,11 +1636,11 @@ EXPORT_SYMBOL(drm_fb_helper_fill_fix);
  * @fb_height: desired fb height
  *
  * Sets up the variable fbdev metainformation from the given fb helper instance
- * and the drm framebuffer allocated in fb_helper->fb.
+ * and the drm framebuffer allocated in &drm_fb_helper.fb.
  *
  * Drivers should call this (or their equivalent setup code) from their
- * ->fb_probe callback after having allocated the fbdev backing
- * storage framebuffer.
+ * &drm_fb_helper_funcs.fb_probe callback after having allocated the fbdev
+ * backing storage framebuffer.
  */
 void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helper,
 			    uint32_t fb_width, uint32_t fb_height)
@@ -2207,9 +2207,9 @@ out:
  * Note that this also registers the fbdev and so allows userspace to call into
  * the driver through the fbdev interfaces.
  *
- * This function will call down into the ->fb_probe callback to let
- * the driver allocate and initialize the fbdev info structure and the drm
- * framebuffer used to back the fbdev. drm_fb_helper_fill_var() and
+ * This function will call down into the &drm_fb_helper_funcs.fb_probe callback
+ * to let the driver allocate and initialize the fbdev info structure and the
+ * drm framebuffer used to back the fbdev. drm_fb_helper_fill_var() and
  * drm_fb_helper_fill_fix() are provided as helpers to setup simple default
  * values for the fbdev info structure.
  *

drivers/gpu/drm/drm_fops.c

@@ -580,7 +580,7 @@ EXPORT_SYMBOL(drm_poll);
  * kmalloc and @p must be the first member element.
  *
  * This is the locked version of drm_event_reserve_init() for callers which
- * already hold dev->event_lock.
+ * already hold &drm_device.event_lock.
  *
  * RETURNS:
  *
@@ -621,7 +621,7 @@ EXPORT_SYMBOL(drm_event_reserve_init_locked);
  * If callers embedded @p into a larger structure it must be allocated with
  * kmalloc and @p must be the first member element.
  *
- * Callers which already hold dev->event_lock should use
+ * Callers which already hold &drm_device.event_lock should use
  * drm_event_reserve_init_locked() instead.
  *
  * RETURNS:
@@ -677,7 +677,7 @@ EXPORT_SYMBOL(drm_event_cancel_free);
  *
  * This function sends the event @e, initialized with drm_event_reserve_init(),
  * to its associated userspace DRM file. Callers must already hold
- * dev->event_lock, see drm_send_event() for the unlocked version.
+ * &drm_device.event_lock, see drm_send_event() for the unlocked version.
  *
  * Note that the core will take care of unlinking and disarming events when the
  * corresponding DRM file is closed. Drivers need not worry about whether the
@@ -717,8 +717,9 @@ EXPORT_SYMBOL(drm_send_event_locked);
  * @e: DRM event to deliver
  *
  * This function sends the event @e, initialized with drm_event_reserve_init(),
- * to its associated userspace DRM file. This function acquires dev->event_lock,
- * see drm_send_event_locked() for callers which already hold this lock.
+ * to its associated userspace DRM file. This function acquires
+ * &drm_device.event_lock, see drm_send_event_locked() for callers which already
+ * hold this lock.
  *
  * Note that the core will take care of unlinking and disarming events when the
  * corresponding DRM file is closed. Drivers need not worry about whether the

drivers/gpu/drm/drm_framebuffer.c

@@ -58,8 +58,8 @@
  * fbdev framebuffer when the struct &struct drm_framebuffer is embedded into
  * the fbdev helper struct) drivers can manually clean up a framebuffer at
  * module unload time with drm_framebuffer_unregister_private(). But doing this
- * is not recommended, and it's better to have a normal free-standing struct
- * &drm_framebuffer.
+ * is not recommended, and it's better to have a normal free-standing &struct
+ * drm_framebuffer.
  */
 
 int drm_framebuffer_check_src_coords(uint32_t src_x, uint32_t src_y,
@@ -470,7 +470,7 @@ int drm_mode_getfb(struct drm_device *dev,
  * usb display-link, mipi manual update panels or edp panel self refresh modes.
  *
  * Modesetting drivers which always update the frontbuffer do not need to
- * implement the corresponding ->dirty framebuffer callback.
+ * implement the corresponding &drm_framebuffer_funcs.dirty callback.
  *
  * Called by the user via ioctl.
  *
@@ -709,10 +709,10 @@ EXPORT_SYMBOL(drm_framebuffer_unregister_private);
  * @fb: framebuffer to remove
  *
  * Cleanup framebuffer. This function is intended to be used from the drivers
- * ->destroy callback. It can also be used to clean up driver private
- * framebuffers embedded into a larger structure.
+ * &drm_framebuffer_funcs.destroy callback. It can also be used to clean up
+ * driver private framebuffers embedded into a larger structure.
  *
- * Note that this function does not remove the fb from active usuage - if it is
+ * Note that this function does not remove the fb from active usage - if it is
  * still used anywhere, hilarity can ensue since userspace could call getfb on
  * the id and get back -EINVAL. Obviously no concern at driver unload time.
  *

drivers/gpu/drm/drm_gem.c

@@ -316,8 +316,8 @@ EXPORT_SYMBOL(drm_gem_handle_delete);
  * @dev: corresponding drm_device
  * @handle: the dumb handle to remove
  * 
- * This implements the ->dumb_destroy kms driver callback for drivers which use
- * gem to manage their backing storage.
+ * This implements the &drm_driver.dumb_destroy kms driver callback for drivers
+ * which use gem to manage their backing storage.
  */
 int drm_gem_dumb_destroy(struct drm_file *file,
 			 struct drm_device *dev,
@@ -333,9 +333,9 @@ EXPORT_SYMBOL(drm_gem_dumb_destroy);
  * @obj: object to register
  * @handlep: pointer to return the created handle to the caller
  * 
- * This expects the dev->object_name_lock to be held already and will drop it
- * before returning. Used to avoid races in establishing new handles when
- * importing an object from either an flink name or a dma-buf.
+ * This expects the &drm_device.object_name_lock to be held already and will
+ * drop it before returning. Used to avoid races in establishing new handles
+ * when importing an object from either an flink name or a dma-buf.
  *
  * Handles must be release again through drm_gem_handle_delete(). This is done
  * when userspace closes @file_priv for all attached handles, or through the
@@ -447,8 +447,8 @@ EXPORT_SYMBOL(drm_gem_free_mmap_offset);
  * structures.
  *
  * This routine allocates and attaches a fake offset for @obj, in cases where
- * the virtual size differs from the physical size (ie. obj->size).  Otherwise
- * just use drm_gem_create_mmap_offset().
+ * the virtual size differs from the physical size (ie. &drm_gem_object.size).
+ * Otherwise just use drm_gem_create_mmap_offset().
  *
  * This function is idempotent and handles an already allocated mmap offset
  * transparently. Drivers do not need to check for this case.
@@ -787,7 +787,7 @@ EXPORT_SYMBOL(drm_gem_object_release);
  * @kref: kref of the object to free
  *
  * Called after the last reference to the object has been lost.
- * Must be called holding &drm_device->struct_mutex.
+ * Must be called holding &drm_device.struct_mutex.
  *
  * Frees the object
  */
@@ -813,7 +813,7 @@ EXPORT_SYMBOL(drm_gem_object_free);
  * @obj: GEM buffer object
  *
  * This releases a reference to @obj. Callers must not hold the
- * dev->struct_mutex lock when calling this function.
+ * &drm_device.struct_mutex lock when calling this function.
  *
  * See also __drm_gem_object_unreference().
  */
@@ -840,9 +840,9 @@ EXPORT_SYMBOL(drm_gem_object_unreference_unlocked);
  * drm_gem_object_unreference - release a GEM BO reference
  * @obj: GEM buffer object
  *
- * This releases a reference to @obj. Callers must hold the dev->struct_mutex
- * lock when calling this function, even when the driver doesn't use
- * dev->struct_mutex for anything.
+ * This releases a reference to @obj. Callers must hold the
+ * &drm_device.struct_mutex lock when calling this function, even when the
+ * driver doesn't use &drm_device.struct_mutex for anything.
  *
  * For drivers not encumbered with legacy locking use
  * drm_gem_object_unreference_unlocked() instead.

drivers/gpu/drm/drm_internal.h

@@ -31,6 +31,7 @@ void drm_lastclose(struct drm_device *dev);
 /* drm_pci.c */
 int drm_irq_by_busid(struct drm_device *dev, void *data,
 		     struct drm_file *file_priv);
+void drm_pci_agp_destroy(struct drm_device *dev);
 
 /* drm_prime.c */
 int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data,

drivers/gpu/drm/drm_irq.c

@@ -95,7 +95,7 @@ static void store_vblank(struct drm_device *dev, unsigned int pipe,
  *
  * Only to be called from drm_crtc_vblank_on().
  *
- * Note: caller must hold dev->vbl_lock since this reads & writes
+ * Note: caller must hold &drm_device.vbl_lock since this reads & writes
  * device vblank fields.
  */
 static void drm_reset_vblank_timestamp(struct drm_device *dev, unsigned int pipe)
@@ -142,7 +142,7 @@ static void drm_reset_vblank_timestamp(struct drm_device *dev, unsigned int pipe
  * Only necessary when going from off->on, to account for frames we
  * didn't get an interrupt for.
  *
- * Note: caller must hold dev->vbl_lock since this reads & writes
+ * Note: caller must hold &drm_device.vbl_lock since this reads & writes
  * device vblank fields.
  */
 static void drm_update_vblank_count(struct drm_device *dev, unsigned int pipe,
@@ -415,29 +415,6 @@ err:
 }
 EXPORT_SYMBOL(drm_vblank_init);
 
-static void drm_irq_vgaarb_nokms(void *cookie, bool state)
-{
-	struct drm_device *dev = cookie;
-
-	if (dev->driver->vgaarb_irq) {
-		dev->driver->vgaarb_irq(dev, state);
-		return;
-	}
-
-	if (!dev->irq_enabled)
-		return;
-
-	if (state) {
-		if (dev->driver->irq_uninstall)
-			dev->driver->irq_uninstall(dev);
-	} else {
-		if (dev->driver->irq_preinstall)
-			dev->driver->irq_preinstall(dev);
-		if (dev->driver->irq_postinstall)
-			dev->driver->irq_postinstall(dev);
-	}
-}
-
 /**
  * drm_irq_install - install IRQ handler
  * @dev: DRM device
@@ -449,7 +426,7 @@ static void drm_irq_vgaarb_nokms(void *cookie, bool state)
  *
  * This is the simplified helper interface provided for drivers with no special
  * needs. Drivers which need to install interrupt handlers for multiple
- * interrupts must instead set drm_device->irq_enabled to signal the DRM core
+ * interrupts must instead set &drm_device.irq_enabled to signal the DRM core
  * that vblank interrupts are available.
  *
  * Returns:
@@ -492,9 +469,6 @@ int drm_irq_install(struct drm_device *dev, int irq)
 		return ret;
 	}
 
-	if (drm_core_check_feature(dev, DRIVER_LEGACY))
-		vga_client_register(dev->pdev, (void *)dev, drm_irq_vgaarb_nokms, NULL);
-
 	/* After installing handler */
 	if (dev->driver->irq_postinstall)
 		ret = dev->driver->irq_postinstall(dev);
@@ -519,7 +493,7 @@ EXPORT_SYMBOL(drm_irq_install);
  * Calls the driver's irq_uninstall() function and unregisters the IRQ handler.
  * This should only be called by drivers which used drm_irq_install() to set up
  * their interrupt handler. Other drivers must only reset
- * drm_device->irq_enabled to false.
+ * &drm_device.irq_enabled to false.
  *
  * Note that for kernel modesetting drivers it is a bug if this function fails.
  * The sanity checks are only to catch buggy user modesetting drivers which call
@@ -982,12 +956,11 @@ static void send_vblank_event(struct drm_device *dev,
  * period. This helper function implements exactly the required vblank arming
  * behaviour.
  *
- * NOTE: Drivers using this to send out the event in &struct drm_crtc_state
- * as part of an atomic commit must ensure that the next vblank happens at
- * exactly the same time as the atomic commit is committed to the hardware. This
- * function itself does **not** protect again the next vblank interrupt racing
- * with either this function call or the atomic commit operation. A possible
- * sequence could be:
+ * NOTE: Drivers using this to send out the &drm_crtc_state.event as part of an
+ * atomic commit must ensure that the next vblank happens at exactly the same
+ * time as the atomic commit is committed to the hardware. This function itself
+ * does **not** protect again the next vblank interrupt racing with either this
+ * function call or the atomic commit operation. A possible sequence could be:
  *
  * 1. Driver commits new hardware state into vblank-synchronized registers.
  * 2. A vblank happens, committing the hardware state. Also the corresponding

drivers/gpu/drm/drm_mm.c

@@ -552,8 +552,8 @@ EXPORT_SYMBOL(drm_mm_replace_node);
  * objects to the roster, probably by walking an LRU list, but this can be
  * freely implemented. Eviction candiates are added using
  * drm_mm_scan_add_block() until a suitable hole is found or there are no
- * further evictable objects. Eviction roster metadata is tracked in struct
- * &drm_mm_scan.
+ * further evictable objects. Eviction roster metadata is tracked in &struct
+ * drm_mm_scan.
  *
  * The driver must walk through all objects again in exactly the reverse
  * order to restore the allocator state. Note that while the allocator is used

drivers/gpu/drm/drm_mode_config.c

@@ -421,7 +421,12 @@ void drm_mode_config_cleanup(struct drm_device *dev)
 		drm_connector_unreference(connector);
 	}
 	drm_connector_list_iter_put(&conn_iter);
-	WARN_ON(!list_empty(&dev->mode_config.connector_list));
+	if (WARN_ON(!list_empty(&dev->mode_config.connector_list))) {
+		drm_connector_list_iter_get(dev, &conn_iter);
+		drm_for_each_connector_iter(connector, &conn_iter)
+			DRM_ERROR("connector %s leaked!\n", connector->name);
+		drm_connector_list_iter_put(&conn_iter);
+	}
 
 	list_for_each_entry_safe(property, pt, &dev->mode_config.property_list,
 				 head) {

drivers/gpu/drm/drm_modes.c

@@ -796,6 +796,26 @@ int drm_mode_vrefresh(const struct drm_display_mode *mode)
 }
 EXPORT_SYMBOL(drm_mode_vrefresh);
 
+/**
+ * drm_mode_get_hv_timing - Fetches hdisplay/vdisplay for given mode
+ * @mode: mode to query
+ * @hdisplay: hdisplay value to fill in
+ * @vdisplay: vdisplay value to fill in
+ *
+ * The vdisplay value will be doubled if the specified mode is a stereo mode of
+ * the appropriate layout.
+ */
+void drm_mode_get_hv_timing(const struct drm_display_mode *mode,
+			    int *hdisplay, int *vdisplay)
+{
+	struct drm_display_mode adjusted = *mode;
+
+	drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY);
+	*hdisplay = adjusted.crtc_hdisplay;
+	*vdisplay = adjusted.crtc_vdisplay;
+}
+EXPORT_SYMBOL(drm_mode_get_hv_timing);
+
 /**
  * drm_mode_set_crtcinfo - set CRTC modesetting timing parameters
  * @p: mode

drivers/gpu/drm/drm_modeset_lock.c

@@ -33,7 +33,7 @@
  * to use &ww_mutex and acquire-contexts to avoid deadlocks.  But because
  * the locking is more distributed around the driver code, we want a bit
  * of extra utility/tracking out of our acquire-ctx.  This is provided
- * by drm_modeset_lock / drm_modeset_acquire_ctx.
+ * by &struct drm_modeset_lock and &struct drm_modeset_acquire_ctx.
  *
  * For basic principles of &ww_mutex, see: Documentation/locking/ww-mutex-design.txt
  *
@@ -53,7 +53,7 @@
  *     drm_modeset_acquire_fini(&ctx);
  *
  * On top of of these per-object locks using &ww_mutex there's also an overall
- * dev->mode_config.lock, for protecting everything else. Mostly this means
+ * &drm_mode_config.mutex, for protecting everything else. Mostly this means
  * probe state of connectors, and preventing hotplug add/removal of connectors.
  *
  * Finally there's a bunch of dedicated locks to protect drm core internal
@@ -71,7 +71,7 @@ static DEFINE_WW_CLASS(crtc_ww_class);
  * drm_modeset_unlock_all() function.
  *
  * This function is deprecated. It allocates a lock acquisition context and
- * stores it in the DRM device's ->mode_config. This facilitate conversion of
+ * stores it in &drm_device.mode_config. This facilitate conversion of
  * existing code because it removes the need to manually deal with the
  * acquisition context, but it is also brittle because the context is global
  * and care must be taken not to nest calls. New code should use the
@@ -124,7 +124,7 @@ EXPORT_SYMBOL(drm_modeset_lock_all);
  * drm_modeset_lock_all() function.
  *
  * This function is deprecated. It uses the lock acquisition context stored
- * in the DRM device's ->mode_config. This facilitates conversion of existing
+ * in &drm_device.mode_config. This facilitates conversion of existing
  * code because it removes the need to manually deal with the acquisition
  * context, but it is also brittle because the context is global and care must
  * be taken not to nest calls. New code should pass the acquisition context
@@ -468,7 +468,7 @@ EXPORT_SYMBOL(drm_modeset_unlock);
  * This function takes all modeset locks, suitable where a more fine-grained
  * scheme isn't (yet) implemented.
  *
- * Unlike drm_modeset_lock_all(), it doesn't take the dev->mode_config.mutex
+ * Unlike drm_modeset_lock_all(), it doesn't take the &drm_mode_config.mutex
  * since that lock isn't required for modeset state changes. Callers which
  * need to grab that lock too need to do so outside of the acquire context
  * @ctx.

drivers/gpu/drm/drm_pci.c

@@ -191,7 +191,7 @@ int drm_irq_by_busid(struct drm_device *dev, void *data,
 static void drm_pci_agp_init(struct drm_device *dev)
 {
 	if (drm_core_check_feature(dev, DRIVER_USE_AGP)) {
-		if (drm_pci_device_is_agp(dev))
+		if (pci_find_capability(dev->pdev, PCI_CAP_ID_AGP))
 			dev->agp = drm_agp_init(dev);
 		if (dev->agp) {
 			dev->agp->agp_mtrr = arch_phys_wc_add(
@@ -223,7 +223,7 @@ void drm_pci_agp_destroy(struct drm_device *dev)
  * Try and register, if we fail to register, backout previous work.
  *
  * NOTE: This function is deprecated, please use drm_dev_alloc() and
- * drm_dev_register() instead and remove your ->load() callback.
+ * drm_dev_register() instead and remove your &drm_driver.load callback.
  *
  * Return: 0 on success or a negative error code on failure.
  */

drivers/gpu/drm/drm_plane.c

@@ -42,7 +42,7 @@
  *
  * Cursor and overlay planes are optional. All drivers should provide one
  * primary plane per CRTC to avoid surprising userspace too much. See enum
- * &drm_plane_type for a more in-depth discussion of these special uapi-relevant
+ * drm_plane_type for a more in-depth discussion of these special uapi-relevant
  * plane types. Special planes are associated with their CRTC by calling
  * drm_crtc_init_with_planes().
  *

drivers/gpu/drm/drm_plane_helper.c

@@ -39,9 +39,9 @@
  *
  * This helper library has two parts. The first part has support to implement
  * primary plane support on top of the normal CRTC configuration interface.
- * Since the legacy ->set_config interface ties the primary plane together with
- * the CRTC state this does not allow userspace to disable the primary plane
- * itself.  To avoid too much duplicated code use
+ * Since the legacy &drm_mode_config_funcs.set_config interface ties the primary
+ * plane together with the CRTC state this does not allow userspace to disable
+ * the primary plane itself.  To avoid too much duplicated code use
  * drm_plane_helper_check_update() which can be used to enforce the same
  * restrictions as primary planes had thus. The default primary plane only
  * expose XRBG8888 and ARGB8888 as valid pixel formats for the attached
@@ -384,7 +384,8 @@ EXPORT_SYMBOL(drm_primary_helper_update);
  * is called in response to a userspace SetPlane operation on the plane with a
  * NULL framebuffer parameter.  It unconditionally fails the disable call with
  * -EINVAL the only way to disable the primary plane without driver support is
- * to disable the entier CRTC. Which does not match the plane ->disable hook.
+ * to disable the entire CRTC. Which does not match the plane
+ * &drm_plane_funcs.disable_plane hook.
  *
  * Note that some hardware may be able to disable the primary plane without
  * disabling the whole CRTC.  Drivers for such hardware should provide their

drivers/gpu/drm/drm_platform.c

@@ -74,7 +74,7 @@ err_free:
  * .load() function.
  *
  * NOTE: This function is deprecated, please use drm_dev_alloc() and
- * drm_dev_register() instead and remove your ->load() callback.
+ * drm_dev_register() instead and remove your &drm_driver.load callback.
  *
  * Return: 0 on success or a negative error code on failure.
  */

drivers/gpu/drm/drm_prime.c

@@ -40,8 +40,11 @@
  * On the export the dma_buf holds a reference to the exporting GEM
  * object. It takes this reference in handle_to_fd_ioctl, when it
  * first calls .prime_export and stores the exporting GEM object in
- * the dma_buf priv. This reference is released when the dma_buf
- * object goes away in the driver .release function.
+ * the dma_buf priv. This reference needs to be released when the
+ * final reference to the &dma_buf itself is dropped and its
+ * &dma_buf_ops.release function is called. For GEM-based drivers,
+ * the dma_buf should be exported using drm_gem_dmabuf_export() and
+ * then released by drm_gem_dmabuf_release().
  *
  * On the import the importing GEM object holds a reference to the
  * dma_buf (which in turn holds a ref to the exporting GEM object).
@@ -51,6 +54,16 @@
  * when the imported object is destroyed, we remove the attachment
  * and drop the reference to the dma_buf.
  *
+ * When all the references to the &dma_buf are dropped, i.e. when
+ * userspace has closed both handles to the imported GEM object (through the
+ * FD_TO_HANDLE IOCTL) and closed the file descriptor of the exported
+ * (through the HANDLE_TO_FD IOCTL) dma_buf, and all kernel-internal references
+ * are also gone, then the dma_buf gets destroyed.  This can also happen as a
+ * part of the clean up procedure in the drm_release() function if userspace
+ * fails to properly clean up.  Note that both the kernel and userspace (by
+ * keeeping the PRIME file descriptors open) can hold references onto a
+ * &dma_buf.
+ *
  * Thus the chain of references always flows in one direction
  * (avoiding loops): importing_gem -> dmabuf -> exporting_gem
  *
@@ -291,7 +304,7 @@ static void drm_gem_unmap_dma_buf(struct dma_buf_attachment *attach,
  * This wraps dma_buf_export() for use by generic GEM drivers that are using
  * drm_gem_dmabuf_release(). In addition to calling dma_buf_export(), we take
  * a reference to the &drm_device and the exported &drm_gem_object (stored in
- * exp_info->priv) which is released by drm_gem_dmabuf_release().
+ * &dma_buf_export_info.priv) which is released by drm_gem_dmabuf_release().
  *
  * Returns the new dmabuf.
  */

drivers/gpu/drm/drm_probe_helper.c

@@ -43,7 +43,7 @@
  * DOC: output probing helper overview
  *
  * This library provides some helper code for output probing. It provides an
- * implementation of the core connector->fill_modes interface with
+ * implementation of the core &drm_connector_funcs.fill_modes interface with
  * drm_helper_probe_single_connector_modes.
  *
  * It also provides support for polling connectors with a work item and for
@@ -187,9 +187,9 @@ drm_connector_detect(struct drm_connector *connector, bool force)
  * be added to the connector's probed_modes list, then culled (based on validity
  * and the @maxX, @maxY parameters) and put into the normal modes list.
  *
- * Intended to be used as a generic implementation of the ->fill_modes()
- * @connector vfunc for drivers that use the CRTC helpers for output mode
- * filtering and detection.
+ * Intended to be used as a generic implementation of the
+ * &drm_connector_funcs.fill_modes() vfunc for drivers that use the CRTC helpers
+ * for output mode filtering and detection.
  *
  * The basic procedure is as follows
  *
@@ -201,7 +201,7 @@ drm_connector_detect(struct drm_connector *connector, bool force)
  *
  *    - debugfs 'override_edid' (used for testing only)
  *    - firmware EDID (drm_load_edid_firmware())
- *    - connector helper ->get_modes() vfunc
+ *    - &drm_connector_helper_funcs.get_modes vfunc
  *    - if the connector status is connector_status_connected, standard
  *      VESA DMT modes up to 1024x768 are automatically added
  *      (drm_add_modes_noedid())
@@ -222,8 +222,8 @@ drm_connector_detect(struct drm_connector *connector, bool force)
  *      (if specified)
  *    - drm_mode_validate_flag() checks the modes againt basic connector
  *      capabilites (interlace_allowed,doublescan_allowed,stereo_allowed)
- *    - the optional connector ->mode_valid() helper can perform driver and/or
- *      hardware specific checks
+ *    - the optional &drm_connector_helper_funcs.mode_valid helper can perform
+ *      driver and/or hardware specific checks
  *
  * 5. Any mode whose status is not OK is pruned from the connector's modes list,
  *    accompanied by a debug message indicating the reason for the mode's

drivers/gpu/drm/drm_property.c

@@ -42,8 +42,8 @@
  * drm_object_attach_property().
  *
  * Property values are only 64bit. To support bigger piles of data (like gamma
- * tables, color correction matrizes or large structures) a property can instead
- * point at a &drm_property_blob with that additional data
+ * tables, color correction matrices or large structures) a property can instead
+ * point at a &drm_property_blob with that additional data.
  *
  * Properties are defined by their symbolic name, userspace must keep a
  * per-object mapping from those names to the property ID used in the atomic

drivers/gpu/drm/drm_sysfs.c

@@ -255,7 +255,7 @@ static const struct attribute_group *connector_dev_groups[] = {
  * @connector: connector to add
  *
  * Create a connector device in sysfs, along with its associated connector
- * properties (so far, connection status, dpms, mode list & edid) and
+ * properties (so far, connection status, dpms, mode list and edid) and
  * generate a hotplug event so userspace knows there's a new connector
  * available.
  */

drivers/gpu/drm/etnaviv/Kconfig

@@ -2,7 +2,7 @@
 config DRM_ETNAVIV
 	tristate "ETNAVIV (DRM support for Vivante GPU IP cores)"
 	depends on DRM
-	depends on ARCH_MXC || ARCH_DOVE
+	depends on ARCH_MXC || ARCH_DOVE || (ARM && COMPILE_TEST)
 	depends on MMU
 	select SHMEM
 	select TMPFS

drivers/gpu/drm/etnaviv/etnaviv_drv.c

@@ -258,12 +258,6 @@ static int etnaviv_debugfs_init(struct drm_minor *minor)
 
 	return ret;
 }
-
-static void etnaviv_debugfs_cleanup(struct drm_minor *minor)
-{
-	drm_debugfs_remove_files(etnaviv_debugfs_list,
-			ARRAY_SIZE(etnaviv_debugfs_list), minor);
-}
 #endif
 
 /*
@@ -509,7 +503,6 @@ static struct drm_driver etnaviv_drm_driver = {
 	.gem_prime_mmap     = etnaviv_gem_prime_mmap,
 #ifdef CONFIG_DEBUG_FS
 	.debugfs_init       = etnaviv_debugfs_init,
-	.debugfs_cleanup    = etnaviv_debugfs_cleanup,
 #endif
 	.ioctls             = etnaviv_ioctls,
 	.num_ioctls         = DRM_ETNAVIV_NUM_IOCTLS,

drivers/gpu/drm/exynos/Kconfig

@@ -19,7 +19,6 @@ comment "CRTCs"
 config DRM_EXYNOS_FIMD
 	bool "FIMD"
 	depends on !FB_S3C
-	select FB_MODE_HELPERS
 	select MFD_SYSCON
 	help
 	  Choose this option if you want to use Exynos FIMD for DRM.
@@ -32,7 +31,6 @@ config DRM_EXYNOS5433_DECON
 config DRM_EXYNOS7_DECON
 	bool "DECON on Exynos7"
 	depends on !FB_S3C
-	select FB_MODE_HELPERS
 	help
 	  Choose this option if you want to use Exynos DECON for DRM.
 

drivers/gpu/drm/gma500/psb_drv.c

@@ -406,11 +406,6 @@ out_err:
 	return ret;
 }
 
-static int psb_driver_device_is_agp(struct drm_device *dev)
-{
-	return 0;
-}
-
 static inline void get_brightness(struct backlight_device *bd)
 {
 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
@@ -487,7 +482,6 @@ static struct drm_driver driver = {
 	.set_busid = drm_pci_set_busid,
 
 	.num_ioctls = ARRAY_SIZE(psb_ioctls),
-	.device_is_agp = psb_driver_device_is_agp,
 	.irq_preinstall = psb_irq_preinstall,
 	.irq_postinstall = psb_irq_postinstall,
 	.irq_uninstall = psb_irq_uninstall,

drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c

@@ -121,7 +121,7 @@ static int hibmc_drm_fb_create(struct drm_fb_helper *helper,
 
 	hi_fbdev->fb = hibmc_framebuffer_init(priv->dev, &mode_cmd, gobj);
 	if (IS_ERR(hi_fbdev->fb)) {
-		ret = PTR_ERR(info);
+		ret = PTR_ERR(hi_fbdev->fb);
 		DRM_ERROR("failed to initialize framebuffer: %d\n", ret);
 		goto out_release_fbi;
 	}

drivers/gpu/drm/i810/i810_dma.c

@@ -1190,6 +1190,14 @@ static int i810_flip_bufs(struct drm_device *dev, void *data,
 
 int i810_driver_load(struct drm_device *dev, unsigned long flags)
 {
+	dev->agp = drm_agp_init(dev);
+	if (dev->agp) {
+		dev->agp->agp_mtrr = arch_phys_wc_add(
+			dev->agp->agp_info.aper_base,
+			dev->agp->agp_info.aper_size *
+			1024 * 1024);
+	}
+
 	/* Our userspace depends upon the agp mapping support. */
 	if (!dev->agp)
 		return -EINVAL;
@@ -1249,19 +1257,3 @@ const struct drm_ioctl_desc i810_ioctls[] = {
 };
 
 int i810_max_ioctl = ARRAY_SIZE(i810_ioctls);
-
-/**
- * Determine if the device really is AGP or not.
- *
- * All Intel graphics chipsets are treated as AGP, even if they are really
- * PCI-e.
- *
- * \param dev   The device to be tested.
- *
- * \returns
- * A value of 1 is always retured to indictate every i810 is AGP.
- */
-int i810_driver_device_is_agp(struct drm_device *dev)
-{
-	return 1;
-}

drivers/gpu/drm/i810/i810_drv.c

@@ -60,7 +60,6 @@ static struct drm_driver driver = {
 	.lastclose = i810_driver_lastclose,
 	.preclose = i810_driver_preclose,
 	.set_busid = drm_pci_set_busid,
-	.device_is_agp = i810_driver_device_is_agp,
 	.dma_quiescent = i810_driver_dma_quiescent,
 	.ioctls = i810_ioctls,
 	.fops = &i810_driver_fops,

drivers/gpu/drm/i810/i810_drv.h

@@ -124,7 +124,6 @@ extern int i810_driver_load(struct drm_device *, unsigned long flags);
 extern void i810_driver_lastclose(struct drm_device *dev);
 extern void i810_driver_preclose(struct drm_device *dev,
 				 struct drm_file *file_priv);
-extern int i810_driver_device_is_agp(struct drm_device *dev);
 
 extern long i810_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 extern const struct drm_ioctl_desc i810_ioctls[];

drivers/gpu/drm/i915/intel_display.c

@@ -11092,7 +11092,7 @@ static int intel_modeset_setup_plane_state(struct drm_atomic_state *state,
 		return PTR_ERR(plane_state);
 
 	if (mode)
-		drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
+		drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay);
 	else
 		hdisplay = vdisplay = 0;
 
@@ -12981,7 +12981,7 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
 	 * computation to clearly distinguish it from the adjusted mode, which
 	 * can be changed by the connectors in the below retry loop.
 	 */
-	drm_crtc_get_hv_timing(&pipe_config->base.mode,
+	drm_mode_get_hv_timing(&pipe_config->base.mode,
 			       &pipe_config->pipe_src_w,
 			       &pipe_config->pipe_src_h);
 

drivers/gpu/drm/i915/intel_dp.c

@@ -1713,7 +1713,9 @@ found:
 		 * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry
 		 */
 		pipe_config->limited_color_range =
-			bpp != 18 && drm_match_cea_mode(adjusted_mode) > 1;
+			bpp != 18 &&
+			drm_default_rgb_quant_range(adjusted_mode) ==
+			HDMI_QUANTIZATION_RANGE_LIMITED;
 	} else {
 		pipe_config->limited_color_range =
 			intel_dp->limited_color_range;

drivers/gpu/drm/i915/intel_dp_mst.c

@@ -587,7 +587,8 @@ intel_dp_mst_encoder_init(struct intel_digital_port *intel_dig_port, int conn_ba
 
 	/* create encoders */
 	intel_dp_create_fake_mst_encoders(intel_dig_port);
-	ret = drm_dp_mst_topology_mgr_init(&intel_dp->mst_mgr, dev->dev, &intel_dp->aux, 16, 3, conn_base_id);
+	ret = drm_dp_mst_topology_mgr_init(&intel_dp->mst_mgr, dev,
+					   &intel_dp->aux, 16, 3, conn_base_id);
 	if (ret) {
 		intel_dp->can_mst = false;
 		return ret;

drivers/gpu/drm/i915/intel_hdmi.c

@@ -455,24 +455,23 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
 					 const struct intel_crtc_state *crtc_state)
 {
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	const struct drm_display_mode *adjusted_mode =
+		&crtc_state->base.adjusted_mode;
 	union hdmi_infoframe frame;
 	int ret;
 
 	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
-						       &crtc_state->base.adjusted_mode);
+						       adjusted_mode);
 	if (ret < 0) {
 		DRM_ERROR("couldn't fill AVI infoframe\n");
 		return;
 	}
 
-	if (intel_hdmi->rgb_quant_range_selectable) {
-		if (crtc_state->limited_color_range)
-			frame.avi.quantization_range =
-				HDMI_QUANTIZATION_RANGE_LIMITED;
-		else
-			frame.avi.quantization_range =
-				HDMI_QUANTIZATION_RANGE_FULL;
-	}
+	drm_hdmi_avi_infoframe_quant_range(&frame.avi, adjusted_mode,
+					   crtc_state->limited_color_range ?
+					   HDMI_QUANTIZATION_RANGE_LIMITED :
+					   HDMI_QUANTIZATION_RANGE_FULL,
+					   intel_hdmi->rgb_quant_range_selectable);
 
 	intel_write_infoframe(encoder, crtc_state, &frame);
 }
@@ -1330,7 +1329,8 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
 		/* See CEA-861-E - 5.1 Default Encoding Parameters */
 		pipe_config->limited_color_range =
 			pipe_config->has_hdmi_sink &&
-			drm_match_cea_mode(adjusted_mode) > 1;
+			drm_default_rgb_quant_range(adjusted_mode) ==
+			HDMI_QUANTIZATION_RANGE_LIMITED;
 	} else {
 		pipe_config->limited_color_range =
 			intel_hdmi->limited_color_range;

drivers/gpu/drm/mga/mga_dma.c

@@ -392,6 +392,24 @@ int mga_driver_load(struct drm_device *dev, unsigned long flags)
 	drm_mga_private_t *dev_priv;
 	int ret;
 
+	/* There are PCI versions of the G450.  These cards have the
+	 * same PCI ID as the AGP G450, but have an additional PCI-to-PCI
+	 * bridge chip.  We detect these cards, which are not currently
+	 * supported by this driver, by looking at the device ID of the
+	 * bus the "card" is on.  If vendor is 0x3388 (Hint Corp) and the
+	 * device is 0x0021 (HB6 Universal PCI-PCI bridge), we reject the
+	 * device.
+	 */
+	if ((dev->pdev->device == 0x0525) && dev->pdev->bus->self
+	    && (dev->pdev->bus->self->vendor == 0x3388)
+	    && (dev->pdev->bus->self->device == 0x0021)
+	    && dev->agp) {
+		/* FIXME: This should be quirked in the pci core, but oh well
+		 * the hw probably stopped existing. */
+		arch_phys_wc_del(dev->agp->agp_mtrr);
+		kfree(dev->agp);
+		dev->agp = NULL;
+	}
 	dev_priv = kzalloc(sizeof(drm_mga_private_t), GFP_KERNEL);
 	if (!dev_priv)
 		return -ENOMEM;
@@ -698,7 +716,7 @@ static int mga_do_pci_dma_bootstrap(struct drm_device *dev,
 static int mga_do_dma_bootstrap(struct drm_device *dev,
 				drm_mga_dma_bootstrap_t *dma_bs)
 {
-	const int is_agp = (dma_bs->agp_mode != 0) && drm_pci_device_is_agp(dev);
+	const int is_agp = (dma_bs->agp_mode != 0) && dev->agp;
 	int err;
 	drm_mga_private_t *const dev_priv =
 	    (drm_mga_private_t *) dev->dev_private;

drivers/gpu/drm/mga/mga_drv.c

@@ -37,8 +37,6 @@
 
 #include <drm/drm_pciids.h>
 
-static int mga_driver_device_is_agp(struct drm_device *dev);
-
 static struct pci_device_id pciidlist[] = {
 	mga_PCI_IDS
 };
@@ -66,7 +64,6 @@ static struct drm_driver driver = {
 	.lastclose = mga_driver_lastclose,
 	.set_busid = drm_pci_set_busid,
 	.dma_quiescent = mga_driver_dma_quiescent,
-	.device_is_agp = mga_driver_device_is_agp,
 	.get_vblank_counter = mga_get_vblank_counter,
 	.enable_vblank = mga_enable_vblank,
 	.disable_vblank = mga_disable_vblank,
@@ -107,37 +104,3 @@ module_exit(mga_exit);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL and additional rights");
-
-/**
- * Determine if the device really is AGP or not.
- *
- * In addition to the usual tests performed by \c drm_device_is_agp, this
- * function detects PCI G450 cards that appear to the system exactly like
- * AGP G450 cards.
- *
- * \param dev   The device to be tested.
- *
- * \returns
- * If the device is a PCI G450, zero is returned.  Otherwise 2 is returned.
- */
-static int mga_driver_device_is_agp(struct drm_device *dev)
-{
-	const struct pci_dev *const pdev = dev->pdev;
-
-	/* There are PCI versions of the G450.  These cards have the
-	 * same PCI ID as the AGP G450, but have an additional PCI-to-PCI
-	 * bridge chip.  We detect these cards, which are not currently
-	 * supported by this driver, by looking at the device ID of the
-	 * bus the "card" is on.  If vendor is 0x3388 (Hint Corp) and the
-	 * device is 0x0021 (HB6 Universal PCI-PCI bridge), we reject the
-	 * device.
-	 */
-
-	if ((pdev->device == 0x0525) && pdev->bus->self
-	    && (pdev->bus->self->vendor == 0x3388)
-	    && (pdev->bus->self->device == 0x0021)) {
-		return 0;
-	}
-
-	return 2;
-}

drivers/gpu/drm/nouveau/nouveau_abi16.c

@@ -199,7 +199,7 @@ nouveau_abi16_ioctl_getparam(ABI16_IOCTL_ARGS)
 		if (!nvxx_device(device)->func->pci)
 			getparam->value = 3;
 		else
-		if (drm_pci_device_is_agp(dev))
+		if (pci_find_capability(dev->pdev, PCI_CAP_ID_AGP))
 			getparam->value = 0;
 		else
 		if (!pci_is_pcie(dev->pdev))

drivers/gpu/drm/nouveau/nv50_display.c

@@ -3417,7 +3417,7 @@ nv50_mstm_new(struct nouveau_encoder *outp, struct drm_dp_aux *aux, int aux_max,
 	mstm->outp = outp;
 	mstm->mgr.cbs = &nv50_mstm;
 
-	ret = drm_dp_mst_topology_mgr_init(&mstm->mgr, dev->dev, aux, aux_max,
+	ret = drm_dp_mst_topology_mgr_init(&mstm->mgr, dev, aux, aux_max,
 					   max_payloads, conn_base_id);
 	if (ret)
 		return ret;

drivers/gpu/drm/omapdrm/omap_debugfs.c

@@ -123,13 +123,4 @@ int omap_debugfs_init(struct drm_minor *minor)
 	return ret;
 }
 
-void omap_debugfs_cleanup(struct drm_minor *minor)
-{
-	drm_debugfs_remove_files(omap_debugfs_list,
-			ARRAY_SIZE(omap_debugfs_list), minor);
-	if (dmm_is_available())
-		drm_debugfs_remove_files(omap_dmm_debugfs_list,
-				ARRAY_SIZE(omap_dmm_debugfs_list), minor);
-}
-
 #endif

drivers/gpu/drm/omapdrm/omap_drv.c

@@ -719,7 +719,6 @@ static struct drm_driver omap_drm_driver = {
 	.disable_vblank = omap_irq_disable_vblank,
 #ifdef CONFIG_DEBUG_FS
 	.debugfs_init = omap_debugfs_init,
-	.debugfs_cleanup = omap_debugfs_cleanup,
 #endif
 	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
 	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,

drivers/gpu/drm/omapdrm/omap_drv.h

@@ -103,7 +103,6 @@ struct omap_drm_private {
 
 #ifdef CONFIG_DEBUG_FS
 int omap_debugfs_init(struct drm_minor *minor);
-void omap_debugfs_cleanup(struct drm_minor *minor);
 void omap_framebuffer_describe(struct drm_framebuffer *fb, struct seq_file *m);
 void omap_gem_describe(struct drm_gem_object *obj, struct seq_file *m);
 void omap_gem_describe_objects(struct list_head *list, struct seq_file *m);

drivers/gpu/drm/radeon/radeon_cs.c

@@ -121,7 +121,8 @@ static int radeon_cs_parser_relocs(struct radeon_cs_parser *p)
 		   VRAM, also but everything into VRAM on AGP cards and older
 		   IGP chips to avoid image corruptions */
 		if (p->ring == R600_RING_TYPE_UVD_INDEX &&
-		    (i == 0 || drm_pci_device_is_agp(p->rdev->ddev) ||
+		    (i == 0 || pci_find_capability(p->rdev->ddev->pdev,
+						   PCI_CAP_ID_AGP) ||
 		     p->rdev->family == CHIP_RS780 ||
 		     p->rdev->family == CHIP_RS880)) {
 

drivers/gpu/drm/radeon/radeon_device.c

@@ -1549,8 +1549,6 @@ failed:
 	return r;
 }
 
-static void radeon_debugfs_remove_files(struct radeon_device *rdev);
-
 /**
  * radeon_device_fini - tear down the driver
  *
@@ -1577,7 +1575,6 @@ void radeon_device_fini(struct radeon_device *rdev)
 	rdev->rmmio = NULL;
 	if (rdev->family >= CHIP_BONAIRE)
 		radeon_doorbell_fini(rdev);
-	radeon_debugfs_remove_files(rdev);
 }
 
 
@@ -1954,16 +1951,3 @@ int radeon_debugfs_add_files(struct radeon_device *rdev,
 #endif
 	return 0;
 }
-
-static void radeon_debugfs_remove_files(struct radeon_device *rdev)
-{
-#if defined(CONFIG_DEBUG_FS)
-	unsigned i;
-
-	for (i = 0; i < rdev->debugfs_count; i++) {
-		drm_debugfs_remove_files(rdev->debugfs[i].files,
-					 rdev->debugfs[i].num_files,
-					 rdev->ddev->primary);
-	}
-#endif
-}

drivers/gpu/drm/radeon/radeon_dp_mst.c

@@ -667,7 +667,7 @@ radeon_dp_mst_init(struct radeon_connector *radeon_connector)
 		return 0;
 
 	radeon_connector->mst_mgr.cbs = &mst_cbs;
-	return drm_dp_mst_topology_mgr_init(&radeon_connector->mst_mgr, dev->dev,
+	return drm_dp_mst_topology_mgr_init(&radeon_connector->mst_mgr, dev,
 					    &radeon_connector->ddc_bus->aux, 16, 6,
 					    radeon_connector->base.base.id);
 }

drivers/gpu/drm/radeon/radeon_kms.c

@@ -105,7 +105,7 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 	dev->dev_private = (void *)rdev;
 
 	/* update BUS flag */
-	if (drm_pci_device_is_agp(dev)) {
+	if (pci_find_capability(dev->pdev, PCI_CAP_ID_AGP)) {
 		flags |= RADEON_IS_AGP;
 	} else if (pci_is_pcie(dev->pdev)) {
 		flags |= RADEON_IS_PCIE;

drivers/gpu/drm/sti/sti_drv.c

@@ -89,38 +89,9 @@ static struct drm_info_list sti_drm_dbg_list[] = {
 	{"fps_get", sti_drm_fps_dbg_show, 0},
 };
 
-static int sti_drm_debugfs_create(struct dentry *root,
-				  struct drm_minor *minor,
-				  const char *name,
-				  const struct file_operations *fops)
-{
-	struct drm_device *dev = minor->dev;
-	struct drm_info_node *node;
-	struct dentry *ent;
-
-	ent = debugfs_create_file(name, S_IRUGO | S_IWUSR, root, dev, fops);
-	if (IS_ERR(ent))
-		return PTR_ERR(ent);
-
-	node = kmalloc(sizeof(*node), GFP_KERNEL);
-	if (!node) {
-		debugfs_remove(ent);
-		return -ENOMEM;
-	}
-
-	node->minor = minor;
-	node->dent = ent;
-	node->info_ent = (void *)fops;
-
-	mutex_lock(&minor->debugfs_lock);
-	list_add(&node->list, &minor->debugfs_list);
-	mutex_unlock(&minor->debugfs_lock);
-
-	return 0;
-}
-
 static int sti_drm_dbg_init(struct drm_minor *minor)
 {
+	struct dentry *dentry;
 	int ret;
 
 	ret = drm_debugfs_create_files(sti_drm_dbg_list,
@@ -129,10 +100,13 @@ static int sti_drm_dbg_init(struct drm_minor *minor)
 	if (ret)
 		goto err;
 
-	ret = sti_drm_debugfs_create(minor->debugfs_root, minor, "fps_show",
+	dentry = debugfs_create_file("fps_show", S_IRUGO | S_IWUSR,
+				     minor->debugfs_root, minor->dev,
 				     &sti_drm_fps_fops);
-	if (ret)
+	if (!dentry) {
+		ret = -ENOMEM;
 		goto err;
+	}
 
 	DRM_INFO("%s: debugfs installed\n", DRIVER_NAME);
 	return 0;
@@ -141,15 +115,6 @@ err:
 	return ret;
 }
 
-static void sti_drm_dbg_cleanup(struct drm_minor *minor)
-{
-	drm_debugfs_remove_files(sti_drm_dbg_list,
-				 ARRAY_SIZE(sti_drm_dbg_list), minor);
-
-	drm_debugfs_remove_files((struct drm_info_list *)&sti_drm_fps_fops,
-				 1, minor);
-}
-
 static void sti_atomic_schedule(struct sti_private *private,
 				struct drm_atomic_state *state)
 {
@@ -314,7 +279,6 @@ static struct drm_driver sti_driver = {
 	.gem_prime_mmap = drm_gem_cma_prime_mmap,
 
 	.debugfs_init = sti_drm_dbg_init,
-	.debugfs_cleanup = sti_drm_dbg_cleanup,
 
 	.name = DRIVER_NAME,
 	.desc = DRIVER_DESC,

drivers/gpu/drm/sti/sti_dvo.c

@@ -195,13 +195,6 @@ static struct drm_info_list dvo_debugfs_files[] = {
 	{ "dvo", dvo_dbg_show, 0, NULL },
 };
 
-static void dvo_debugfs_exit(struct sti_dvo *dvo, struct drm_minor *minor)
-{
-	drm_debugfs_remove_files(dvo_debugfs_files,
-				 ARRAY_SIZE(dvo_debugfs_files),
-				 minor);
-}
-
 static int dvo_debugfs_init(struct sti_dvo *dvo, struct drm_minor *minor)
 {
 	unsigned int i;
@@ -514,9 +507,6 @@ static void sti_dvo_unbind(struct device *dev,
 			   struct device *master, void *data)
 {
 	struct sti_dvo *dvo = dev_get_drvdata(dev);
-	struct drm_device *drm_dev = data;
-
-	dvo_debugfs_exit(dvo, drm_dev->primary);
 
 	drm_bridge_remove(dvo->bridge);
 }

drivers/gpu/drm/sti/sti_hda.c

@@ -365,13 +365,6 @@ static struct drm_info_list hda_debugfs_files[] = {
 	{ "hda", hda_dbg_show, 0, NULL },
 };
 
-static void hda_debugfs_exit(struct sti_hda *hda, struct drm_minor *minor)
-{
-	drm_debugfs_remove_files(hda_debugfs_files,
-				 ARRAY_SIZE(hda_debugfs_files),
-				 minor);
-}
-
 static int hda_debugfs_init(struct sti_hda *hda, struct drm_minor *minor)
 {
 	unsigned int i;
@@ -739,10 +732,6 @@ err_sysfs:
 static void sti_hda_unbind(struct device *dev,
 		struct device *master, void *data)
 {
-	struct sti_hda *hda = dev_get_drvdata(dev);
-	struct drm_device *drm_dev = data;
-
-	hda_debugfs_exit(hda, drm_dev->primary);
 }
 
 static const struct component_ops sti_hda_ops = {

drivers/gpu/drm/sti/sti_hdmi.c

@@ -731,13 +731,6 @@ static struct drm_info_list hdmi_debugfs_files[] = {
 	{ "hdmi", hdmi_dbg_show, 0, NULL },
 };
 
-static void hdmi_debugfs_exit(struct sti_hdmi *hdmi, struct drm_minor *minor)
-{
-	drm_debugfs_remove_files(hdmi_debugfs_files,
-				 ARRAY_SIZE(hdmi_debugfs_files),
-				 minor);
-}
-
 static int hdmi_debugfs_init(struct sti_hdmi *hdmi, struct drm_minor *minor)
 {
 	unsigned int i;
@@ -1356,10 +1349,6 @@ err_sysfs:
 static void sti_hdmi_unbind(struct device *dev,
 		struct device *master, void *data)
 {
-	struct sti_hdmi *hdmi = dev_get_drvdata(dev);
-	struct drm_device *drm_dev = data;
-
-	hdmi_debugfs_exit(hdmi, drm_dev->primary);
 }
 
 static const struct component_ops sti_hdmi_ops = {

drivers/gpu/drm/sti/sti_tvout.c

@@ -567,13 +567,6 @@ static struct drm_info_list tvout_debugfs_files[] = {
 	{ "tvout", tvout_dbg_show, 0, NULL },
 };
 
-static void tvout_debugfs_exit(struct sti_tvout *tvout, struct drm_minor *minor)
-{
-	drm_debugfs_remove_files(tvout_debugfs_files,
-				 ARRAY_SIZE(tvout_debugfs_files),
-				 minor);
-}
-
 static int tvout_debugfs_init(struct sti_tvout *tvout, struct drm_minor *minor)
 {
 	unsigned int i;
@@ -627,7 +620,6 @@ static void sti_tvout_early_unregister(struct drm_encoder *encoder)
 	if (!tvout->debugfs_registered)
 		return;
 
-	tvout_debugfs_exit(tvout, encoder->dev->primary);
 	tvout->debugfs_registered = false;
 }
 

drivers/gpu/drm/tegra/drm.c

@@ -894,12 +894,6 @@ static int tegra_debugfs_init(struct drm_minor *minor)
 					ARRAY_SIZE(tegra_debugfs_list),
 					minor->debugfs_root, minor);
 }
-
-static void tegra_debugfs_cleanup(struct drm_minor *minor)
-{
-	drm_debugfs_remove_files(tegra_debugfs_list,
-				 ARRAY_SIZE(tegra_debugfs_list), minor);
-}
 #endif
 
 static struct drm_driver tegra_drm_driver = {
@@ -917,7 +911,6 @@ static struct drm_driver tegra_drm_driver = {
 
 #if defined(CONFIG_DEBUG_FS)
 	.debugfs_init = tegra_debugfs_init,
-	.debugfs_cleanup = tegra_debugfs_cleanup,
 #endif
 
 	.gem_free_object_unlocked = tegra_bo_free_object,

drivers/gpu/drm/tilcdc/tilcdc_drv.c

@@ -539,17 +539,6 @@ static int tilcdc_debugfs_init(struct drm_minor *minor)
 
 	return ret;
 }
-
-static void tilcdc_debugfs_cleanup(struct drm_minor *minor)
-{
-	struct tilcdc_module *mod;
-	drm_debugfs_remove_files(tilcdc_debugfs_list,
-			ARRAY_SIZE(tilcdc_debugfs_list), minor);
-
-	list_for_each_entry(mod, &module_list, list)
-		if (mod->funcs->debugfs_cleanup)
-			mod->funcs->debugfs_cleanup(mod, minor);
-}
 #endif
 
 static const struct file_operations fops = {
@@ -589,7 +578,6 @@ static struct drm_driver tilcdc_driver = {
 	.gem_prime_mmap		= drm_gem_cma_prime_mmap,
 #ifdef CONFIG_DEBUG_FS
 	.debugfs_init       = tilcdc_debugfs_init,
-	.debugfs_cleanup    = tilcdc_debugfs_cleanup,
 #endif
 	.fops               = &fops,
 	.name               = "tilcdc",

drivers/gpu/drm/tilcdc/tilcdc_drv.h

@@ -111,8 +111,6 @@ struct tilcdc_module_ops {
 #ifdef CONFIG_DEBUG_FS
 	/* create debugfs nodes (can be NULL): */
 	int (*debugfs_init)(struct tilcdc_module *mod, struct drm_minor *minor);
-	/* cleanup debugfs nodes (can be NULL): */
-	void (*debugfs_cleanup)(struct tilcdc_module *mod, struct drm_minor *minor);
 #endif
 };
 

drivers/gpu/drm/ttm/ttm_bo.c

@@ -1670,7 +1670,6 @@ static int ttm_bo_swapout(struct ttm_mem_shrink *shrink)
 	struct ttm_buffer_object *bo;
 	int ret = -EBUSY;
 	int put_count;
-	uint32_t swap_placement = (TTM_PL_FLAG_CACHED | TTM_PL_FLAG_SYSTEM);
 
 	spin_lock(&glob->lru_lock);
 	list_for_each_entry(bo, &glob->swap_lru, swap) {
@@ -1701,7 +1700,8 @@ static int ttm_bo_swapout(struct ttm_mem_shrink *shrink)
 	 * Move to system cached
 	 */
 
-	if ((bo->mem.placement & swap_placement) != swap_placement) {
+	if (bo->mem.mem_type != TTM_PL_SYSTEM ||
+	    bo->ttm->caching_state != tt_cached) {
 		struct ttm_mem_reg evict_mem;
 
 		evict_mem = bo->mem;

drivers/gpu/drm/vc4/vc4_debugfs.c

@@ -36,9 +36,3 @@ vc4_debugfs_init(struct drm_minor *minor)
 	return drm_debugfs_create_files(vc4_debugfs_list, VC4_DEBUGFS_ENTRIES,
 					minor->debugfs_root, minor);
 }
-
-void
-vc4_debugfs_cleanup(struct drm_minor *minor)
-{
-	drm_debugfs_remove_files(vc4_debugfs_list, VC4_DEBUGFS_ENTRIES, minor);
-}

drivers/gpu/drm/vc4/vc4_drv.c

@@ -145,7 +145,6 @@ static struct drm_driver vc4_drm_driver = {
 
 #if defined(CONFIG_DEBUG_FS)
 	.debugfs_init = vc4_debugfs_init,
-	.debugfs_cleanup = vc4_debugfs_cleanup,
 #endif
 
 	.gem_create_object = vc4_create_object,

drivers/gpu/drm/vc4/vc4_drv.h

@@ -457,7 +457,6 @@ int vc4_crtc_get_vblank_timestamp(struct drm_device *dev, unsigned int crtc_id,
 
 /* vc4_debugfs.c */
 int vc4_debugfs_init(struct drm_minor *minor);
-void vc4_debugfs_cleanup(struct drm_minor *minor);
 
 /* vc4_drv.c */
 void __iomem *vc4_ioremap_regs(struct platform_device *dev, int index);

drivers/gpu/drm/vc4/vc4_hdmi.c

@@ -356,15 +356,11 @@ static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder)
 		return;
 	}
 
-	if (vc4_encoder->rgb_range_selectable) {
-		if (vc4_encoder->limited_rgb_range) {
-			frame.avi.quantization_range =
-				HDMI_QUANTIZATION_RANGE_LIMITED;
-		} else {
-			frame.avi.quantization_range =
-				HDMI_QUANTIZATION_RANGE_FULL;
-		}
-	}
+	drm_hdmi_avi_infoframe_quant_range(&frame.avi, mode,
+					   vc4_encoder->limited_rgb_range ?
+					   HDMI_QUANTIZATION_RANGE_LIMITED :
+					   HDMI_QUANTIZATION_RANGE_FULL,
+					   vc4_encoder->rgb_range_selectable);
 
 	vc4_hdmi_write_infoframe(encoder, &frame);
 }
@@ -463,7 +459,9 @@ static void vc4_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	csc_ctl = VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR,
 				VC4_HD_CSC_CTL_ORDER);
 
-	if (vc4_encoder->hdmi_monitor && drm_match_cea_mode(mode) > 1) {
+	if (vc4_encoder->hdmi_monitor &&
+	    drm_default_rgb_quant_range(mode) ==
+	    HDMI_QUANTIZATION_RANGE_LIMITED) {
 		/* CEA VICs other than #1 requre limited range RGB
 		 * output unless overridden by an AVI infoframe.
 		 * Apply a colorspace conversion to squash 0-255 down

drivers/gpu/drm/vgem/vgem_fence.c

@@ -190,12 +190,12 @@ int vgem_fence_attach_ioctl(struct drm_device *dev,
 
 	/* Expose the fence via the dma-buf */
 	ret = 0;
-	ww_mutex_lock(&resv->lock, NULL);
+	reservation_object_lock(resv, NULL);
 	if (arg->flags & VGEM_FENCE_WRITE)
 		reservation_object_add_excl_fence(resv, fence);
 	else if ((ret = reservation_object_reserve_shared(resv)) == 0)
 		reservation_object_add_shared_fence(resv, fence);
-	ww_mutex_unlock(&resv->lock);
+	reservation_object_unlock(resv);
 
 	/* Record the fence in our idr for later signaling */
 	if (ret == 0) {

include/drm/drmP.h

@@ -790,21 +790,6 @@ extern void drm_sysfs_hotplug_event(struct drm_device *dev);
 
 /*@}*/
 
-/* PCI section */
-static __inline__ int drm_pci_device_is_agp(struct drm_device *dev)
-{
-	if (dev->driver->device_is_agp != NULL) {
-		int err = (*dev->driver->device_is_agp) (dev);
-
-		if (err != 2) {
-			return err;
-		}
-	}
-
-	return pci_find_capability(dev->pdev, PCI_CAP_ID_AGP);
-}
-void drm_pci_agp_destroy(struct drm_device *dev);
-
 extern int drm_pci_init(struct drm_driver *driver, struct pci_driver *pdriver);
 extern void drm_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver);
 #ifdef CONFIG_PCI

include/drm/drm_atomic.h

@@ -123,7 +123,8 @@ struct drm_crtc_commit {
 	/**
 	 * @commit_entry:
 	 *
-	 * Entry on the per-CRTC commit_list. Protected by crtc->commit_lock.
+	 * Entry on the per-CRTC &drm_crtc.commit_list. Protected by
+	 * $drm_crtc.commit_lock.
 	 */
 	struct list_head commit_entry;
 
@@ -429,7 +430,8 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
  *
  * For example if the CRTC mode has changed, and the hardware is able to enact
  * the requested mode change without going through a full modeset, the driver
- * should clear mode_changed during its ->atomic_check.
+ * should clear mode_changed in its &drm_mode_config_funcs.atomic_check
+ * implementation.
  */
 static inline bool
 drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state)

include/drm/drm_atomic_helper.h

@@ -177,7 +177,8 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  *
  * This iterates over the current state, useful (for example) when applying
  * atomic state after it has been checked and swapped.  To iterate over the
- * planes which *will* be attached (for ->atomic_check()) see
+ * planes which *will* be attached (more useful in code called from
+ * &drm_mode_config_funcs.atomic_check) see
  * drm_atomic_crtc_state_for_each_plane().
  */
 #define drm_atomic_crtc_for_each_plane(plane, crtc) \
@@ -189,8 +190,9 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  * @crtc_state: the incoming crtc-state
  *
  * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
- * attached if the specified state is applied.  Useful during (for example)
- * ->atomic_check() operations, to validate the incoming state.
+ * attached if the specified state is applied.  Useful during for example
+ * in code called from &drm_mode_config_funcs.atomic_check operations, to
+ * validate the incoming state.
  */
 #define drm_atomic_crtc_state_for_each_plane(plane, crtc_state) \
 	drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask)
@@ -202,8 +204,9 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  * @crtc_state: the incoming crtc-state
  *
  * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
- * attached if the specified state is applied.  Useful during (for example)
- * ->atomic_check() operations, to validate the incoming state.
+ * attached if the specified state is applied.  Useful during for example
+ * in code called from &drm_mode_config_funcs.atomic_check operations, to
+ * validate the incoming state.
  *
  * Compared to just drm_atomic_crtc_state_for_each_plane() this also fills in a
  * const plane_state. This is useful when a driver just wants to peek at other

include/drm/drm_auth.h

@@ -43,18 +43,18 @@ struct drm_master {
 	struct kref refcount;
 	struct drm_device *dev;
 	/**
-	 * @unique: Unique identifier: e.g. busid. Protected by struct
-	 * &drm_device master_mutex.
+	 * @unique: Unique identifier: e.g. busid. Protected by
+	 * &drm_device.master_mutex.
 	 */
 	char *unique;
 	/**
-	 * @unique_len: Length of unique field. Protected by &struct drm_device
-	 * master_mutex.
+	 * @unique_len: Length of unique field. Protected by
+	 * &drm_device.master_mutex.
 	 */
 	int unique_len;
 	/**
-	 * @magic_map: Map of used authentication tokens. Protected by struct
-	 * &drm_device master_mutex.
+	 * @magic_map: Map of used authentication tokens. Protected by
+	 * &drm_device.master_mutex.
 	 */
 	struct idr magic_map;
 	struct drm_lock_data lock;

include/drm/drm_color_mgmt.h

@@ -34,7 +34,7 @@ int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
 				 int gamma_size);
 
 /**
- * drm_color_lut_extract - clamp&round LUT entries
+ * drm_color_lut_extract - clamp and round LUT entries
  * @user_input: input value
  * @bit_precision: number of bits the hw LUT supports
  *

include/drm/drm_connector.h

@@ -331,15 +331,15 @@ struct drm_connector_funcs {
 	 *
 	 * Entry point for output detection and basic mode validation. The
 	 * driver should reprobe the output if needed (e.g. when hotplug
-	 * handling is unreliable), add all detected modes to connector->modes
+	 * handling is unreliable), add all detected modes to &drm_connector.modes
 	 * and filter out any the device can't support in any configuration. It
 	 * also needs to filter out any modes wider or higher than the
 	 * parameters max_width and max_height indicate.
 	 *
 	 * The drivers must also prune any modes no longer valid from
-	 * connector->modes. Furthermore it must update connector->status and
-	 * connector->edid.  If no EDID has been received for this output
-	 * connector->edid must be NULL.
+	 * &drm_connector.modes. Furthermore it must update
+	 * &drm_connector.status and &drm_connector.edid.  If no EDID has been
+	 * received for this output connector->edid must be NULL.
 	 *
 	 * Drivers using the probe helpers should use
 	 * drm_helper_probe_single_connector_modes() or
@@ -348,7 +348,7 @@ struct drm_connector_funcs {
 	 *
 	 * RETURNS:
 	 *
-	 * The number of modes detected and filled into connector->modes.
+	 * The number of modes detected and filled into &drm_connector.modes.
 	 */
 	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
 
@@ -381,7 +381,7 @@ struct drm_connector_funcs {
 	 * core drm connector interfaces. Everything added from this callback
 	 * should be unregistered in the early_unregister callback.
 	 *
-	 * This is called while holding drm_connector->mutex.
+	 * This is called while holding &drm_connector.mutex.
 	 *
 	 * Returns:
 	 *
@@ -398,7 +398,7 @@ struct drm_connector_funcs {
 	 * early in the driver unload sequence to disable userspace access
 	 * before data structures are torndown.
 	 *
-	 * This is called while holding drm_connector->mutex.
+	 * This is called while holding &drm_connector.mutex.
 	 */
 	void (*early_unregister)(struct drm_connector *connector);
 
@@ -418,9 +418,9 @@ struct drm_connector_funcs {
 	 * Duplicate the current atomic state for this connector and return it.
 	 * The core and helpers guarantee that any atomic state duplicated with
 	 * this hook and still owned by the caller (i.e. not transferred to the
-	 * driver by calling ->atomic_commit() from struct
-	 * &drm_mode_config_funcs) will be cleaned up by calling the
-	 * @atomic_destroy_state hook in this structure.
+	 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
+	 * cleaned up by calling the @atomic_destroy_state hook in this
+	 * structure.
 	 *
 	 * Atomic drivers which don't subclass &struct drm_connector_state should use
 	 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
@@ -428,7 +428,7 @@ struct drm_connector_funcs {
 	 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
 	 * duplicated in a consistent fashion across drivers.
 	 *
-	 * It is an error to call this hook before connector->state has been
+	 * It is an error to call this hook before &drm_connector.state has been
 	 * initialized correctly.
 	 *
 	 * NOTE:
@@ -609,8 +609,8 @@ struct drm_connector {
 
 	/**
 	 * @mutex: Lock for general connector state, but currently only protects
-	 * @registered. Most of the connector state is still protected by the
-	 * mutex in &drm_mode_config.
+	 * @registered. Most of the connector state is still protected by
+	 * &drm_mode_config.mutex.
 	 */
 	struct mutex mutex;
 
@@ -636,22 +636,22 @@ struct drm_connector {
 	/**
 	 * @modes:
 	 * Modes available on this connector (from fill_modes() + user).
-	 * Protected by dev->mode_config.mutex.
+	 * Protected by &drm_mode_config.mutex.
 	 */
-	struct list_head modes; /* list of modes on this connector */
+	struct list_head modes;
 
 	/**
 	 * @status:
 	 * One of the drm_connector_status enums (connected, not, or unknown).
-	 * Protected by dev->mode_config.mutex.
+	 * Protected by &drm_mode_config.mutex.
 	 */
 	enum drm_connector_status status;
 
 	/**
 	 * @probed_modes:
 	 * These are modes added by probing with DDC or the BIOS, before
-	 * filtering is applied. Used by the probe helpers.Protected by
-	 * dev->mode_config.mutex.
+	 * filtering is applied. Used by the probe helpers. Protected by
+	 * &drm_mode_config.mutex.
 	 */
 	struct list_head probed_modes;
 
@@ -659,10 +659,10 @@ struct drm_connector {
 	 * @display_info: Display information is filled from EDID information
 	 * when a display is detected. For non hot-pluggable displays such as
 	 * flat panels in embedded systems, the driver should initialize the
-	 * display_info.width_mm and display_info.height_mm fields with the
-	 * physical size of the display.
+	 * &drm_display_info.width_mm and &drm_display_info.height_mm fields
+	 * with the physical size of the display.
 	 *
-	 * Protected by dev->mode_config.mutex.
+	 * Protected by &drm_mode_config.mutex.
 	 */
 	struct drm_display_info display_info;
 	const struct drm_connector_funcs *funcs;

include/drm/drm_crtc.h

@@ -81,8 +81,8 @@ struct drm_plane_helper_funcs;
  * @enable: whether the CRTC should be enabled, gates all other state
  * @active: whether the CRTC is actively displaying (used for DPMS)
  * @planes_changed: planes on this crtc are updated
- * @mode_changed: crtc_state->mode or crtc_state->enable has been changed
- * @active_changed: crtc_state->active has been toggled.
+ * @mode_changed: @mode or @enable has been changed
+ * @active_changed: @active has been toggled.
  * @connectors_changed: connectors to this crtc have been updated
  * @zpos_changed: zpos values of planes on this crtc have been updated
  * @color_mgmt_changed: color management properties have changed (degamma or
@@ -102,9 +102,10 @@ struct drm_plane_helper_funcs;
  *
  * Note that the distinction between @enable and @active is rather subtile:
  * Flipping @active while @enable is set without changing anything else may
- * never return in a failure from the ->atomic_check callback. Userspace assumes
- * that a DPMS On will always succeed. In other words: @enable controls resource
- * assignment, @active controls the actual hardware state.
+ * never return in a failure from the &drm_mode_config_funcs.atomic_check
+ * callback. Userspace assumes that a DPMS On will always succeed. In other
+ * words: @enable controls resource assignment, @active controls the actual
+ * hardware state.
  *
  * The three booleans active_changed, connectors_changed and mode_changed are
  * intended to indicate whether a full modeset is needed, rather than strictly
@@ -346,8 +347,8 @@ struct drm_crtc_funcs {
 	 * through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application
 	 * requests a page flip the DRM core verifies that the new frame buffer
 	 * is large enough to be scanned out by the CRTC in the currently
-	 * configured mode and then calls the CRTC ->page_flip() operation with a
-	 * pointer to the new frame buffer.
+	 * configured mode and then calls this hook with a pointer to the new
+	 * frame buffer.
 	 *
 	 * The driver must wait for any pending rendering to the new framebuffer
 	 * to complete before executing the flip. It should also wait for any
@@ -382,7 +383,7 @@ struct drm_crtc_funcs {
 	 * RETURNS:
 	 *
 	 * 0 on success or a negative error code on failure. Note that if a
-	 * ->page_flip() operation is already pending the callback should return
+	 * page flip operation is already pending the callback should return
 	 * -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode
 	 * or just runtime disabled through DPMS respectively the new atomic
 	 * "ACTIVE" state) should result in an -EINVAL error code. Note that
@@ -434,19 +435,19 @@ struct drm_crtc_funcs {
 	 * @atomic_duplicate_state:
 	 *
 	 * Duplicate the current atomic state for this CRTC and return it.
-	 * The core and helpers gurantee that any atomic state duplicated with
+	 * The core and helpers guarantee that any atomic state duplicated with
 	 * this hook and still owned by the caller (i.e. not transferred to the
-	 * driver by calling ->atomic_commit() from struct
-	 * &drm_mode_config_funcs) will be cleaned up by calling the
-	 * @atomic_destroy_state hook in this structure.
+	 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
+	 * cleaned up by calling the @atomic_destroy_state hook in this
+	 * structure.
 	 *
-	 * Atomic drivers which don't subclass &struct drm_crtc should use
+	 * Atomic drivers which don't subclass &struct drm_crtc_state should use
 	 * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the
 	 * state structure to extend it with driver-private state should use
 	 * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is
 	 * duplicated in a consistent fashion across drivers.
 	 *
-	 * It is an error to call this hook before crtc->state has been
+	 * It is an error to call this hook before &drm_crtc.state has been
 	 * initialized correctly.
 	 *
 	 * NOTE:
@@ -559,7 +560,7 @@ struct drm_crtc_funcs {
 	 *
 	 * This optional hook should be used to unregister the additional
 	 * userspace interfaces attached to the crtc from
-	 * late_unregister(). It is called from drm_dev_unregister(),
+	 * @late_register. It is called from drm_dev_unregister(),
 	 * early in the driver unload sequence to disable userspace access
 	 * before data structures are torndown.
 	 */
@@ -640,8 +641,8 @@ struct drm_crtc {
 	 *
 	 * This provides a read lock for the overall crtc state (mode, dpms
 	 * state, ...) and a write lock for everything which can be update
-	 * without a full modeset (fb, cursor data, crtc properties ...). Full
-	 * modeset also need to grab dev->mode_config.connection_mutex.
+	 * without a full modeset (fb, cursor data, crtc properties ...). A full
+	 * modeset also need to grab &drm_mode_config.connection_mutex.
 	 */
 	struct drm_modeset_lock mutex;
 
@@ -773,10 +774,8 @@ struct drm_crtc {
  * @connectors: array of connectors to drive with this CRTC if possible
  * @num_connectors: size of @connectors array
  *
- * Represents a single crtc the connectors that it drives with what mode
- * and from which framebuffer it scans out from.
- *
- * This is used to set modes.
+ * This represents a modeset configuration for the legacy SETCRTC ioctl and is
+ * also used internally. Atomic drivers instead use &drm_atomic_state.
  */
 struct drm_mode_set {
 	struct drm_framebuffer *fb;
@@ -825,15 +824,21 @@ static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc)
 	return 1 << drm_crtc_index(crtc);
 }
 
-void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
-			    int *hdisplay, int *vdisplay);
 int drm_crtc_force_disable(struct drm_crtc *crtc);
 int drm_crtc_force_disable_all(struct drm_device *dev);
 
 int drm_mode_set_config_internal(struct drm_mode_set *set);
 struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx);
 
-/* Helpers */
+/**
+ * drm_crtc_find - look up a CRTC object from its ID
+ * @dev: DRM device
+ * @id: &drm_mode_object ID
+ *
+ * This can be used to look up a CRTC from its userspace ID. Only used by
+ * drivers for legacy IOCTLs and interface, nowadays extensions to the KMS
+ * userspace interface should be done using &drm_property.
+ */
 static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
 	uint32_t id)
 {
@@ -842,6 +847,13 @@ static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
 	return mo ? obj_to_crtc(mo) : NULL;
 }
 
+/**
+ * drm_for_each_crtc - iterate over all CRTCs
+ * @crtc: a &struct drm_crtc as the loop cursor
+ * @dev: the &struct drm_device
+ *
+ * Iterate over all CRTCs of @dev.
+ */
 #define drm_for_each_crtc(crtc, dev) \
 	list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head)
 

include/drm/drm_dp_mst_helper.h

@@ -414,7 +414,7 @@ struct drm_dp_mst_topology_mgr {
 	/**
 	 * @dev: device pointer for adding i2c devices etc.
 	 */
-	struct device *dev;
+	struct drm_device *dev;
 	/**
 	 * @cbs: callbacks for connector addition and destruction.
 	 */
@@ -493,8 +493,8 @@ struct drm_dp_mst_topology_mgr {
 	int total_pbn;
 
 	/**
-	 * @qlock: protects @tx_msg_downq, the tx_slots in struct
-	 * &drm_dp_mst_branch and txmsg->state once they are queued
+	 * @qlock: protects @tx_msg_downq, the &drm_dp_mst_branch.txslost and
+	 * &drm_dp_sideband_msg_tx.state once they are queued
 	 */
 	struct mutex qlock;
 	/**
@@ -508,8 +508,7 @@ struct drm_dp_mst_topology_mgr {
 	struct mutex payload_lock;
 	/**
 	 * @proposed_vcpis: Array of pointers for the new VCPI allocation. The
-	 * VCPI structure itself is embedded into the corresponding
-	 * &drm_dp_mst_port structure.
+	 * VCPI structure itself is &drm_dp_mst_port.vcpi.
 	 */
 	struct drm_dp_vcpi **proposed_vcpis;
 	/**
@@ -556,7 +555,10 @@ struct drm_dp_mst_topology_mgr {
 	struct work_struct destroy_connector_work;
 };
 
-int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr, struct device *dev, struct drm_dp_aux *aux, int max_dpcd_transaction_bytes, int max_payloads, int conn_base_id);
+int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr,
+				 struct drm_device *dev, struct drm_dp_aux *aux,
+				 int max_dpcd_transaction_bytes,
+				 int max_payloads, int conn_base_id);
 
 void drm_dp_mst_topology_mgr_destroy(struct drm_dp_mst_topology_mgr *mgr);
 

include/drm/drm_drv.h

@@ -81,7 +81,6 @@ struct drm_driver {
 	 * Zero on success, non-zero value on failure.
 	 */
 	int (*load) (struct drm_device *, unsigned long flags);
-	int (*firstopen) (struct drm_device *);
 	int (*open) (struct drm_device *, struct drm_file *);
 	void (*preclose) (struct drm_device *, struct drm_file *file_priv);
 	void (*postclose) (struct drm_device *, struct drm_file *);
@@ -103,9 +102,6 @@ struct drm_driver {
 	 *
 	 */
 	void (*unload) (struct drm_device *);
-	int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv);
-	int (*dma_quiescent) (struct drm_device *);
-	int (*context_dtor) (struct drm_device *dev, int context);
 	int (*set_busid)(struct drm_device *dev, struct drm_master *master);
 
 	/**
@@ -150,20 +146,6 @@ struct drm_driver {
 	 */
 	void (*disable_vblank) (struct drm_device *dev, unsigned int pipe);
 
-	/**
-	 * @device_is_agp:
-	 *
-	 * Called by drm_device_is_agp().  Typically used to determine if a card
-	 * is really attached to AGP or not.
-	 *
-	 * Returns:
-	 *
-	 * One of three values is returned depending on whether or not the
-	 * card is absolutely not AGP (return of 0), absolutely is AGP
-	 * (return of 1), or may or may not be AGP (return of 2).
-	 */
-	int (*device_is_agp) (struct drm_device *dev);
-
 	/**
 	 * @get_scanout_position:
 	 *
@@ -314,7 +296,7 @@ struct drm_driver {
 	/**
 	 * @gem_free_object_unlocked: deconstructor for drm_gem_objects
 	 *
-	 * This is for drivers which are not encumbered with dev->struct_mutex
+	 * This is for drivers which are not encumbered with &drm_device.struct_mutex
 	 * legacy locking schemes. Use this hook instead of @gem_free_object.
 	 */
 	void (*gem_free_object_unlocked) (struct drm_gem_object *obj);
@@ -359,9 +341,6 @@ struct drm_driver {
 	int (*gem_prime_mmap)(struct drm_gem_object *obj,
 				struct vm_area_struct *vma);
 
-	/* vga arb irq handler */
-	void (*vgaarb_irq)(struct drm_device *dev, bool state);
-
 	/**
 	 * @dumb_create:
 	 *
@@ -430,13 +409,20 @@ struct drm_driver {
 	char *date;
 
 	u32 driver_features;
-	int dev_priv_size;
 	const struct drm_ioctl_desc *ioctls;
 	int num_ioctls;
 	const struct file_operations *fops;
 
+	/* Everything below here is for legacy driver, never use! */
+	/* private: */
+
 	/* List of devices hanging off this driver with stealth attach. */
 	struct list_head legacy_dev_list;
+	int (*firstopen) (struct drm_device *);
+	int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv);
+	int (*dma_quiescent) (struct drm_device *);
+	int (*context_dtor) (struct drm_device *dev, int context);
+	int dev_priv_size;
 };
 
 extern __printf(6, 7)

include/drm/drm_edid.h

@@ -24,6 +24,7 @@
 #define __DRM_EDID_H__
 
 #include <linux/types.h>
+#include <linux/hdmi.h>
 
 struct drm_device;
 struct i2c_adapter;
@@ -322,8 +323,6 @@ struct cea_sad {
 struct drm_encoder;
 struct drm_connector;
 struct drm_display_mode;
-struct hdmi_avi_infoframe;
-struct hdmi_vendor_infoframe;
 
 void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid);
 int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads);
@@ -346,6 +345,11 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
 int
 drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
 					    const struct drm_display_mode *mode);
+void
+drm_hdmi_avi_infoframe_quant_range(struct hdmi_avi_infoframe *frame,
+				   const struct drm_display_mode *mode,
+				   enum hdmi_quantization_range rgb_quant_range,
+				   bool rgb_quant_range_selectable);
 
 /**
  * drm_eld_mnl - Get ELD monitor name length in bytes.
@@ -442,6 +446,8 @@ enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code);
 bool drm_detect_hdmi_monitor(struct edid *edid);
 bool drm_detect_monitor_audio(struct edid *edid);
 bool drm_rgb_quant_range_selectable(struct edid *edid);
+enum hdmi_quantization_range
+drm_default_rgb_quant_range(const struct drm_display_mode *mode);
 int drm_add_modes_noedid(struct drm_connector *connector,
 			 int hdisplay, int vdisplay);
 void drm_set_preferred_mode(struct drm_connector *connector,

include/drm/drm_encoder.h

@@ -75,7 +75,7 @@ struct drm_encoder_funcs {
 	 *
 	 * This optional hook should be used to unregister the additional
 	 * userspace interfaces attached to the encoder from
-	 * late_unregister(). It is called from drm_dev_unregister(),
+	 * @late_register. It is called from drm_dev_unregister(),
 	 * early in the driver unload sequence to disable userspace access
 	 * before data structures are torndown.
 	 */

include/drm/drm_fb_cma_helper.h

@@ -26,6 +26,8 @@ void drm_fbdev_cma_fini(struct drm_fbdev_cma *fbdev_cma);
 void drm_fbdev_cma_restore_mode(struct drm_fbdev_cma *fbdev_cma);
 void drm_fbdev_cma_hotplug_event(struct drm_fbdev_cma *fbdev_cma);
 void drm_fbdev_cma_set_suspend(struct drm_fbdev_cma *fbdev_cma, int state);
+void drm_fbdev_cma_set_suspend_unlocked(struct drm_fbdev_cma *fbdev_cma,
+					int state);
 
 void drm_fb_cma_destroy(struct drm_framebuffer *fb);
 int drm_fb_cma_create_handle(struct drm_framebuffer *fb,

include/drm/drm_flip_work.h

@@ -54,7 +54,7 @@ typedef void (*drm_flip_func_t)(struct drm_flip_work *work, void *val);
 /**
  * struct drm_flip_task - flip work task
  * @node: list entry element
- * @data: data to pass to work->func
+ * @data: data to pass to &drm_flip_work.func
  */
 struct drm_flip_task {
 	struct list_head node;

include/drm/drm_framebuffer.h

@@ -40,8 +40,8 @@ struct drm_framebuffer_funcs {
 	 *
 	 * Clean up framebuffer resources, specifically also unreference the
 	 * backing storage. The core guarantees to call this function for every
-	 * framebuffer successfully created by ->fb_create() in
-	 * &drm_mode_config_funcs. Drivers must also call
+	 * framebuffer successfully created by calling
+	 * &drm_mode_config_funcs.fb_create. Drivers must also call
 	 * drm_framebuffer_cleanup() to release DRM core resources for this
 	 * framebuffer.
 	 */
@@ -112,8 +112,8 @@ struct drm_framebuffer {
 	 */
 	struct drm_device *dev;
 	/**
-	 * @head: Place on the dev->mode_config.fb_list, access protected by
-	 * dev->mode_config.fb_lock.
+	 * @head: Place on the &drm_mode_config.fb_list, access protected by
+	 * &drm_mode_config.fb_lock.
 	 */
 	struct list_head head;
 
@@ -187,8 +187,7 @@ struct drm_framebuffer {
 	 */
 	int hot_y;
 	/**
-	 * @filp_head: Placed on &struct drm_file fbs list_head, protected by
-	 * fbs_lock in the same structure.
+	 * @filp_head: Placed on &drm_file.fbs, protected by &drm_file.fbs_lock.
 	 */
 	struct list_head filp_head;
 };
@@ -260,8 +259,8 @@ static inline void drm_framebuffer_assign(struct drm_framebuffer **p,
  * @fb: the loop cursor
  * @dev: the DRM device
  *
- * Iterate over all framebuffers of @dev. User must hold the fb_lock from
- * &drm_mode_config.
+ * Iterate over all framebuffers of @dev. User must hold
+ * &drm_mode_config.fb_lock.
  */
 #define drm_for_each_fb(fb, dev) \
 	for (WARN_ON(!mutex_is_locked(&(dev)->mode_config.fb_lock)),		\

include/drm/drm_gem.h

@@ -63,7 +63,7 @@ struct drm_gem_object {
 	 * drops to 0 any global names (e.g. the id in the flink namespace) will
 	 * be cleared.
 	 *
-	 * Protected by dev->object_name_lock.
+	 * Protected by &drm_device.object_name_lock.
 	 */
 	unsigned handle_count;
 
@@ -106,8 +106,8 @@ struct drm_gem_object {
 	 * @name:
 	 *
 	 * Global name for this object, starts at 1. 0 means unnamed.
-	 * Access is covered by dev->object_name_lock. This is used by the GEM_FLINK
-	 * and GEM_OPEN ioctls.
+	 * Access is covered by &drm_device.object_name_lock. This is used by
+	 * the GEM_FLINK and GEM_OPEN ioctls.
 	 */
 	int name;
 
@@ -150,7 +150,7 @@ struct drm_gem_object {
 	 * through importing or exporting). We break the resulting reference
 	 * loop when the last gem handle for this object is released.
 	 *
-	 * Protected by obj->object_name_lock.
+	 * Protected by &drm_device.object_name_lock.
 	 */
 	struct dma_buf *dma_buf;
 
@@ -163,7 +163,7 @@ struct drm_gem_object {
 	 * attachment point for the device. This is invariant over the lifetime
 	 * of a gem object.
 	 *
-	 * The driver's ->gem_free_object callback is responsible for cleaning
+	 * The &drm_driver.gem_free_object callback is responsible for cleaning
 	 * up the dma_buf attachment and references acquired at import time.
 	 *
 	 * Note that the drm gem/prime core does not depend upon drivers setting
@@ -204,7 +204,7 @@ drm_gem_object_reference(struct drm_gem_object *obj)
  * @obj: GEM buffer object
  *
  * This function is meant to be used by drivers which are not encumbered with
- * dev->struct_mutex legacy locking and which are using the
+ * &drm_device.struct_mutex legacy locking and which are using the
  * gem_free_object_unlocked callback. It avoids all the locking checks and
  * locking overhead of drm_gem_object_unreference() and
  * drm_gem_object_unreference_unlocked().
@@ -212,8 +212,8 @@ drm_gem_object_reference(struct drm_gem_object *obj)
  * Drivers should never call this directly in their code. Instead they should
  * wrap it up into a ``driver_gem_object_unreference(struct driver_gem_object
  * *obj)`` wrapper function, and use that. Shared code should never call this, to
- * avoid breaking drivers by accident which still depend upon dev->struct_mutex
- * locking.
+ * avoid breaking drivers by accident which still depend upon
+ * &drm_device.struct_mutex locking.
  */
 static inline void
 __drm_gem_object_unreference(struct drm_gem_object *obj)

include/drm/drm_irq.h

@@ -67,7 +67,7 @@ struct drm_vblank_crtc {
 	 * @disable_timer: Disable timer for the delayed vblank disabling
 	 * hysteresis logic. Vblank disabling is controlled through the
 	 * drm_vblank_offdelay module option and the setting of the
-	 * max_vblank_count value in the &drm_device structure.
+	 * &drm_device.max_vblank_count value.
 	 */
 	struct timer_list disable_timer;
 
@@ -92,7 +92,7 @@ struct drm_vblank_crtc {
 	 */
 	atomic_t refcount;		/* number of users of vblank interruptsper crtc */
 	/**
-	 * @last: Protected by dev->vbl_lock, used for wraparound handling.
+	 * @last: Protected by &drm_device.vbl_lock, used for wraparound handling.
 	 */
 	u32 last;
 	/**

include/drm/drm_mode_config.h

@@ -132,8 +132,8 @@ struct drm_mode_config_funcs {
 	 *    that before calling this hook.
 	 *
 	 * See the documentation of @atomic_commit for an exhaustive list of
-	 * error conditions which don't have to be checked at the
-	 * ->atomic_check() stage?
+	 * error conditions which don't have to be checked at the in this
+	 * callback.
 	 *
 	 * See the documentation for &struct drm_atomic_state for how exactly
 	 * an atomic modeset update is described.
@@ -198,10 +198,10 @@ struct drm_mode_config_funcs {
 	 * completed. These events are per-CRTC and can be distinguished by the
 	 * CRTC index supplied in &drm_event to userspace.
 	 *
-	 * The drm core will supply a &struct drm_event in the event
-	 * member of each CRTC's &drm_crtc_state structure. See the
-	 * documentation for &drm_crtc_state for more details about the precise
-	 * semantics of this event.
+	 * The drm core will supply a &struct drm_event in each CRTC's
+	 * &drm_crtc_state.event. See the documentation for
+	 * &drm_crtc_state.event for more details about the precise semantics of
+	 * this event.
 	 *
 	 * NOTE:
 	 *

include/drm/drm_mode_object.h

@@ -86,10 +86,15 @@ struct drm_object_properties {
 	 *
 	 * Note that atomic drivers do not store mutable properties in this
 	 * array, but only the decoded values in the corresponding state
-	 * structure. The decoding is done using the ->atomic_get_property and
-	 * ->atomic_set_property hooks of the corresponding object. Hence atomic
-	 * drivers should not use drm_object_property_set_value() and
-	 * drm_object_property_get_value() on mutable objects, i.e. those
+	 * structure. The decoding is done using the &drm_crtc.atomic_get_property and
+	 * &drm_crtc.atomic_set_property hooks for &struct drm_crtc. For
+	 * &struct drm_plane the hooks are &drm_plane_funcs.atomic_get_property and
+	 * &drm_plane_funcs.atomic_set_property. And for &struct drm_connector
+	 * the hooks are &drm_connector_funcs.atomic_get_property and
+	 * &drm_connector_funcs.atomic_set_property .
+	 *
+	 * Hence atomic drivers should not use drm_object_property_set_value()
+	 * and drm_object_property_get_value() on mutable objects, i.e. those
 	 * without the DRM_MODE_PROP_IMMUTABLE flag set.
 	 */
 	uint64_t values[DRM_OBJECT_MAX_PROPERTY];

include/drm/drm_modes.h

@@ -459,6 +459,8 @@ int of_get_drm_display_mode(struct device_node *np,
 void drm_mode_set_name(struct drm_display_mode *mode);
 int drm_mode_hsync(const struct drm_display_mode *mode);
 int drm_mode_vrefresh(const struct drm_display_mode *mode);
+void drm_mode_get_hv_timing(const struct drm_display_mode *mode,
+			    int *hdisplay, int *vdisplay);
 
 void drm_mode_set_crtcinfo(struct drm_display_mode *p,
 			   int adjust_flags);