init.c 4.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196
  1. /*
  2. * S390 version
  3. * Copyright IBM Corp. 1999
  4. * Author(s): Hartmut Penner (hp@de.ibm.com)
  5. *
  6. * Derived from "arch/i386/mm/init.c"
  7. * Copyright (C) 1995 Linus Torvalds
  8. */
  9. #include <linux/signal.h>
  10. #include <linux/sched.h>
  11. #include <linux/kernel.h>
  12. #include <linux/errno.h>
  13. #include <linux/string.h>
  14. #include <linux/types.h>
  15. #include <linux/ptrace.h>
  16. #include <linux/mman.h>
  17. #include <linux/mm.h>
  18. #include <linux/swap.h>
  19. #include <linux/smp.h>
  20. #include <linux/init.h>
  21. #include <linux/pagemap.h>
  22. #include <linux/bootmem.h>
  23. #include <linux/memory.h>
  24. #include <linux/pfn.h>
  25. #include <linux/poison.h>
  26. #include <linux/initrd.h>
  27. #include <linux/export.h>
  28. #include <linux/gfp.h>
  29. #include <linux/memblock.h>
  30. #include <asm/processor.h>
  31. #include <linux/uaccess.h>
  32. #include <asm/pgtable.h>
  33. #include <asm/pgalloc.h>
  34. #include <asm/dma.h>
  35. #include <asm/lowcore.h>
  36. #include <asm/tlb.h>
  37. #include <asm/tlbflush.h>
  38. #include <asm/sections.h>
  39. #include <asm/ctl_reg.h>
  40. #include <asm/sclp.h>
  41. #include <asm/set_memory.h>
  42. pgd_t swapper_pg_dir[PTRS_PER_PGD] __section(.bss..swapper_pg_dir);
  43. unsigned long empty_zero_page, zero_page_mask;
  44. EXPORT_SYMBOL(empty_zero_page);
  45. EXPORT_SYMBOL(zero_page_mask);
  46. static void __init setup_zero_pages(void)
  47. {
  48. unsigned int order;
  49. struct page *page;
  50. int i;
  51. /* Latest machines require a mapping granularity of 512KB */
  52. order = 7;
  53. /* Limit number of empty zero pages for small memory sizes */
  54. while (order > 2 && (totalram_pages >> 10) < (1UL << order))
  55. order--;
  56. empty_zero_page = __get_free_pages(GFP_KERNEL | __GFP_ZERO, order);
  57. if (!empty_zero_page)
  58. panic("Out of memory in setup_zero_pages");
  59. page = virt_to_page((void *) empty_zero_page);
  60. split_page(page, order);
  61. for (i = 1 << order; i > 0; i--) {
  62. mark_page_reserved(page);
  63. page++;
  64. }
  65. zero_page_mask = ((PAGE_SIZE << order) - 1) & PAGE_MASK;
  66. }
  67. /*
  68. * paging_init() sets up the page tables
  69. */
  70. void __init paging_init(void)
  71. {
  72. unsigned long max_zone_pfns[MAX_NR_ZONES];
  73. unsigned long pgd_type, asce_bits;
  74. psw_t psw;
  75. init_mm.pgd = swapper_pg_dir;
  76. if (VMALLOC_END > (1UL << 42)) {
  77. asce_bits = _ASCE_TYPE_REGION2 | _ASCE_TABLE_LENGTH;
  78. pgd_type = _REGION2_ENTRY_EMPTY;
  79. } else {
  80. asce_bits = _ASCE_TYPE_REGION3 | _ASCE_TABLE_LENGTH;
  81. pgd_type = _REGION3_ENTRY_EMPTY;
  82. }
  83. init_mm.context.asce = (__pa(init_mm.pgd) & PAGE_MASK) | asce_bits;
  84. S390_lowcore.kernel_asce = init_mm.context.asce;
  85. clear_table((unsigned long *) init_mm.pgd, pgd_type,
  86. sizeof(unsigned long)*2048);
  87. vmem_map_init();
  88. /* enable virtual mapping in kernel mode */
  89. __ctl_load(S390_lowcore.kernel_asce, 1, 1);
  90. __ctl_load(S390_lowcore.kernel_asce, 7, 7);
  91. __ctl_load(S390_lowcore.kernel_asce, 13, 13);
  92. psw.mask = __extract_psw();
  93. psw_bits(psw).dat = 1;
  94. psw_bits(psw).as = PSW_BITS_AS_HOME;
  95. __load_psw_mask(psw.mask);
  96. sparse_memory_present_with_active_regions(MAX_NUMNODES);
  97. sparse_init();
  98. memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
  99. max_zone_pfns[ZONE_DMA] = PFN_DOWN(MAX_DMA_ADDRESS);
  100. max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
  101. free_area_init_nodes(max_zone_pfns);
  102. }
  103. void mark_rodata_ro(void)
  104. {
  105. unsigned long size = __end_ro_after_init - __start_ro_after_init;
  106. set_memory_ro((unsigned long)__start_ro_after_init, size >> PAGE_SHIFT);
  107. pr_info("Write protected read-only-after-init data: %luk\n", size >> 10);
  108. }
  109. void __init mem_init(void)
  110. {
  111. cpumask_set_cpu(0, &init_mm.context.cpu_attach_mask);
  112. cpumask_set_cpu(0, mm_cpumask(&init_mm));
  113. set_max_mapnr(max_low_pfn);
  114. high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
  115. /* Setup guest page hinting */
  116. cmma_init();
  117. /* this will put all low memory onto the freelists */
  118. free_all_bootmem();
  119. setup_zero_pages(); /* Setup zeroed pages. */
  120. mem_init_print_info(NULL);
  121. }
  122. void free_initmem(void)
  123. {
  124. __set_memory((unsigned long) _sinittext,
  125. (_einittext - _sinittext) >> PAGE_SHIFT,
  126. SET_MEMORY_RW | SET_MEMORY_NX);
  127. free_initmem_default(POISON_FREE_INITMEM);
  128. }
  129. #ifdef CONFIG_BLK_DEV_INITRD
  130. void __init free_initrd_mem(unsigned long start, unsigned long end)
  131. {
  132. free_reserved_area((void *)start, (void *)end, POISON_FREE_INITMEM,
  133. "initrd");
  134. }
  135. #endif
  136. unsigned long memory_block_size_bytes(void)
  137. {
  138. /*
  139. * Make sure the memory block size is always greater
  140. * or equal than the memory increment size.
  141. */
  142. return max_t(unsigned long, MIN_MEMORY_BLOCK_SIZE, sclp.rzm);
  143. }
  144. #ifdef CONFIG_MEMORY_HOTPLUG
  145. int arch_add_memory(int nid, u64 start, u64 size, bool want_memblock)
  146. {
  147. unsigned long start_pfn = PFN_DOWN(start);
  148. unsigned long size_pages = PFN_DOWN(size);
  149. int rc;
  150. rc = vmem_add_mapping(start, size);
  151. if (rc)
  152. return rc;
  153. rc = __add_pages(nid, start_pfn, size_pages, want_memblock);
  154. if (rc)
  155. vmem_remove_mapping(start, size);
  156. return rc;
  157. }
  158. #ifdef CONFIG_MEMORY_HOTREMOVE
  159. int arch_remove_memory(u64 start, u64 size)
  160. {
  161. /*
  162. * There is no hardware or firmware interface which could trigger a
  163. * hot memory remove on s390. So there is nothing that needs to be
  164. * implemented.
  165. */
  166. return -EBUSY;
  167. }
  168. #endif
  169. #endif /* CONFIG_MEMORY_HOTPLUG */