sun5i-a13-hsg-h702.dts 3.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134
  1. /*
  2. * Copyright 2014 Chen-Yu Tsai <wens@csie.org>
  3. *
  4. * This file is dual-licensed: you can use it either under the terms
  5. * of the GPL or the X11 license, at your option. Note that this dual
  6. * licensing only applies to this file, and not this project as a
  7. * whole.
  8. *
  9. * a) This file is free software; you can redistribute it and/or
  10. * modify it under the terms of the GNU General Public License as
  11. * published by the Free Software Foundation; either version 2 of the
  12. * License, or (at your option) any later version.
  13. *
  14. * This file is distributed in the hope that it will be useful,
  15. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  17. * GNU General Public License for more details.
  18. *
  19. * You should have received a copy of the GNU General Public
  20. * License along with this file; if not, write to the Free
  21. * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22. * MA 02110-1301 USA
  23. *
  24. * Or, alternatively,
  25. *
  26. * b) Permission is hereby granted, free of charge, to any person
  27. * obtaining a copy of this software and associated documentation
  28. * files (the "Software"), to deal in the Software without
  29. * restriction, including without limitation the rights to use,
  30. * copy, modify, merge, publish, distribute, sublicense, and/or
  31. * sell copies of the Software, and to permit persons to whom the
  32. * Software is furnished to do so, subject to the following
  33. * conditions:
  34. *
  35. * The above copyright notice and this permission notice shall be
  36. * included in all copies or substantial portions of the Software.
  37. *
  38. * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39. * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40. * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41. * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42. * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43. * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44. * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45. * OTHER DEALINGS IN THE SOFTWARE.
  46. */
  47. /dts-v1/;
  48. /include/ "sun5i-a13.dtsi"
  49. /include/ "sunxi-common-regulators.dtsi"
  50. / {
  51. model = "HSG H702";
  52. compatible = "hsg,h702", "allwinner,sun5i-a13";
  53. aliases {
  54. serial0 = &uart1;
  55. };
  56. soc@01c00000 {
  57. mmc0: mmc@01c0f000 {
  58. pinctrl-names = "default";
  59. pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
  60. vmmc-supply = <&reg_vcc3v3>;
  61. bus-width = <4>;
  62. cd-gpios = <&pio 6 0 0>; /* PG0 */
  63. cd-inverted;
  64. status = "okay";
  65. };
  66. usbphy: phy@01c13400 {
  67. /*
  68. * There doesn't seem to be a GPIO for controlling
  69. * usb1 vbus, despite the fex file saying otherwise.
  70. */
  71. usb1_vbus-supply = <&reg_vcc5v0>;
  72. status = "okay";
  73. };
  74. ehci0: usb@01c14000 {
  75. status = "okay";
  76. };
  77. ohci0: usb@01c14400 {
  78. status = "okay";
  79. };
  80. pinctrl@01c20800 {
  81. mmc0_cd_pin_h702: mmc0_cd_pin@0 {
  82. allwinner,pins = "PG0";
  83. allwinner,function = "gpio_in";
  84. allwinner,drive = <0>;
  85. allwinner,pull = <1>;
  86. };
  87. };
  88. uart1: serial@01c28400 {
  89. pinctrl-names = "default";
  90. pinctrl-0 = <&uart1_pins_b>;
  91. status = "okay";
  92. };
  93. i2c0: i2c@01c2ac00 {
  94. pinctrl-names = "default";
  95. pinctrl-0 = <&i2c0_pins_a>;
  96. status = "okay";
  97. axp209: pmic@34 {
  98. compatible = "x-powers,axp209";
  99. reg = <0x34>;
  100. interrupts = <0>;
  101. interrupt-controller;
  102. #interrupt-cells = <1>;
  103. };
  104. };
  105. i2c1: i2c@01c2b000 {
  106. pinctrl-names = "default";
  107. pinctrl-0 = <&i2c1_pins_a>;
  108. status = "okay";
  109. pcf8563: rtc@51 {
  110. compatible = "nxp,pcf8563";
  111. reg = <0x51>;
  112. };
  113. };
  114. i2c2: i2c@01c2b400 {
  115. pinctrl-names = "default";
  116. pinctrl-0 = <&i2c2_pins_a>;
  117. status = "okay";
  118. };
  119. };
  120. };