|
|
@@ -160,7 +160,8 @@ static int cx24120_readreg(struct cx24120_state *state, u8 reg)
|
|
|
int ret;
|
|
|
u8 buf = 0;
|
|
|
struct i2c_msg msg[] = {
|
|
|
- { .addr = state->config->i2c_addr,
|
|
|
+ {
|
|
|
+ .addr = state->config->i2c_addr,
|
|
|
.flags = 0,
|
|
|
.len = 1,
|
|
|
.buf = ®
|
|
|
@@ -488,7 +489,8 @@ static int cx24120_diseqc_send_burst(struct dvb_frontend *fe,
|
|
|
struct cx24120_state *state = fe->demodulator_priv;
|
|
|
struct cx24120_cmd cmd;
|
|
|
|
|
|
- /* Yes, cmd.len is set to zero. The old driver
|
|
|
+ /*
|
|
|
+ * Yes, cmd.len is set to zero. The old driver
|
|
|
* didn't specify any len, but also had a
|
|
|
* memset 0 before every use of the cmd struct
|
|
|
* which would have set it to zero.
|
|
|
@@ -671,9 +673,11 @@ static int cx24120_read_status(struct dvb_frontend *fe, fe_status_t *status)
|
|
|
if (lock & CX24120_HAS_LOCK)
|
|
|
*status |= FE_HAS_LOCK;
|
|
|
|
|
|
- /* TODO: is FE_HAS_SYNC in the right place?
|
|
|
+ /*
|
|
|
+ * TODO: is FE_HAS_SYNC in the right place?
|
|
|
* Other cx241xx drivers have this slightly
|
|
|
- * different */
|
|
|
+ * different
|
|
|
+ */
|
|
|
|
|
|
state->fe_status = *status;
|
|
|
cx24120_get_stats(state);
|
|
|
@@ -695,7 +699,8 @@ static int cx24120_read_status(struct dvb_frontend *fe, fe_status_t *status)
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-/* FEC & modulation lookup table
|
|
|
+/*
|
|
|
+ * FEC & modulation lookup table
|
|
|
* Used for decoding the REG_FECMODE register
|
|
|
* once tuned in.
|
|
|
*/
|
|
|
@@ -775,14 +780,15 @@ static int cx24120_get_fec(struct dvb_frontend *fe)
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-/* Clock ratios lookup table
|
|
|
+/*
|
|
|
+ * Clock ratios lookup table
|
|
|
*
|
|
|
* Values obtained from much larger table in old driver
|
|
|
* which had numerous entries which would never match.
|
|
|
*
|
|
|
* There's probably some way of calculating these but I
|
|
|
* can't determine the pattern
|
|
|
-*/
|
|
|
+ */
|
|
|
static struct cx24120_clock_ratios_table {
|
|
|
fe_delivery_system_t delsys;
|
|
|
fe_pilot_t pilot;
|
|
|
@@ -935,7 +941,7 @@ static struct cx24120_modfec_table {
|
|
|
fe_code_rate_t fec;
|
|
|
u8 val;
|
|
|
} modfec_table[] = {
|
|
|
-/*delsys mod fec val */
|
|
|
+ /*delsys mod fec val */
|
|
|
{ SYS_DVBS, QPSK, FEC_1_2, 0x2e },
|
|
|
{ SYS_DVBS, QPSK, FEC_2_3, 0x2f },
|
|
|
{ SYS_DVBS, QPSK, FEC_3_4, 0x30 },
|