mac80211: remove 80+80 MHz rate reporting

These rates are treated the same as 160 MHz in the spec,
so it makes no sense to distinguish them. As no driver
uses them yet, this is also not a problem, just remove
them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

include/net/mac80211.h

@@ -931,15 +931,13 @@ enum mac80211_rx_flags {
  * These flags are used with the @vht_flag member of
  *	&struct ieee80211_rx_status.
  * @RX_VHT_FLAG_80MHZ: 80 MHz was used
- * @RX_VHT_FLAG_80P80MHZ: 80+80 MHz was used
  * @RX_VHT_FLAG_160MHZ: 160 MHz was used
  * @RX_VHT_FLAG_BF: packet was beamformed
  */
 enum mac80211_rx_vht_flags {
 	RX_VHT_FLAG_80MHZ		= BIT(0),
-	RX_VHT_FLAG_80P80MHZ		= BIT(1),
-	RX_VHT_FLAG_160MHZ		= BIT(2),
-	RX_VHT_FLAG_BF			= BIT(3),
+	RX_VHT_FLAG_160MHZ		= BIT(1),
+	RX_VHT_FLAG_BF			= BIT(2),
 };
 
 /**

net/mac80211/cfg.c

@@ -465,8 +465,6 @@ void sta_set_rate_info_rx(struct sta_info *sta, struct rate_info *rinfo)
 		rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI;
 	if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_80MHZ)
 		rinfo->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH;
-	if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_80P80MHZ)
-		rinfo->flags |= RATE_INFO_FLAGS_80P80_MHZ_WIDTH;
 	if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_160MHZ)
 		rinfo->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH;
 }

net/mac80211/rx.c

@@ -361,9 +361,6 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
 		u16 known = local->hw.radiotap_vht_details;
 
 		rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_VHT);
-		/* known field - how to handle 80+80? */
-		if (status->vht_flag & RX_VHT_FLAG_80P80MHZ)
-			known &= ~IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
 		put_unaligned_le16(known, pos);
 		pos += 2;
 		/* flags */
@@ -378,8 +375,6 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
 		/* bandwidth */
 		if (status->vht_flag & RX_VHT_FLAG_80MHZ)
 			*pos++ = 4;
-		else if (status->vht_flag & RX_VHT_FLAG_80P80MHZ)
-			*pos++ = 0; /* marked not known above */
 		else if (status->vht_flag & RX_VHT_FLAG_160MHZ)
 			*pos++ = 11;
 		else if (status->flag & RX_FLAG_40MHZ)

net/mac80211/util.c

@@ -2552,8 +2552,6 @@ u64 ieee80211_calculate_rx_timestamp(struct ieee80211_local *local,
 			ri.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
 		if (status->vht_flag & RX_VHT_FLAG_80MHZ)
 			ri.flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH;
-		if (status->vht_flag & RX_VHT_FLAG_80P80MHZ)
-			ri.flags |= RATE_INFO_FLAGS_80P80_MHZ_WIDTH;
 		if (status->vht_flag & RX_VHT_FLAG_160MHZ)
 			ri.flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH;
 		if (status->flag & RX_FLAG_SHORT_GI)