irqchip/stm32: Don't clear rising/falling config registers at init

[ Upstream commit 0dda09666f50eae9c5b794dd89b1fd8a8d89d714 ]

Falling and rising configuration and status registers are not banked.
As they are shared with M4 co-processor, they should not be cleared
at probe time, else M4 co-processor configuration will be lost.

Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures")
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/irqchip/irq-stm32-exti.c

@@ -650,11 +650,6 @@ stm32_exti_chip_data *stm32_exti_chip_init(struct stm32_exti_host_data *h_data,
 	 */
 	writel_relaxed(0, base + stm32_bank->imr_ofst);
 	writel_relaxed(0, base + stm32_bank->emr_ofst);
-	writel_relaxed(0, base + stm32_bank->rtsr_ofst);
-	writel_relaxed(0, base + stm32_bank->ftsr_ofst);
-	writel_relaxed(~0UL, base + stm32_bank->rpr_ofst);
-	if (stm32_bank->fpr_ofst != UNDEF_REG)
-		writel_relaxed(~0UL, base + stm32_bank->fpr_ofst);
 
 	pr_info("%s: bank%d, External IRQs available:%#x\n",
 		node->full_name, bank_idx, irqs_mask);