소스 검색

wil6210: change HALP logging category to IRQ

Change the logging category of HALP functions from
MISC to IRQ, since the HALP mechanism is closely
related to interrupts. Both HALP and IRQ create
a heavy load of logging messages when enabled,
so their logging is typically disabled during normal debug
scenarios. Having them in the same logging category
will make it easier to disable logging for both in one go.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Lior David 9 년 전
부모
커밋
ef86f249fa
2개의 변경된 파일15개의 추가작업 그리고 15개의 파일을 삭제
  1. 2 2
      drivers/net/wireless/ath/wil6210/interrupt.c
  2. 13 13
      drivers/net/wireless/ath/wil6210/main.c

+ 2 - 2
drivers/net/wireless/ath/wil6210/interrupt.c

@@ -599,7 +599,7 @@ void wil6210_clear_irq(struct wil6210_priv *wil)
 
 void wil6210_set_halp(struct wil6210_priv *wil)
 {
-	wil_dbg_misc(wil, "%s()\n", __func__);
+	wil_dbg_irq(wil, "%s()\n", __func__);
 
 	wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, ICS),
 	      BIT_DMA_EP_MISC_ICR_HALP);
@@ -607,7 +607,7 @@ void wil6210_set_halp(struct wil6210_priv *wil)
 
 void wil6210_clear_halp(struct wil6210_priv *wil)
 {
-	wil_dbg_misc(wil, "%s()\n", __func__);
+	wil_dbg_irq(wil, "%s()\n", __func__);
 
 	wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, ICR),
 	      BIT_DMA_EP_MISC_ICR_HALP);

+ 13 - 13
drivers/net/wireless/ath/wil6210/main.c

@@ -1118,8 +1118,8 @@ void wil_halp_vote(struct wil6210_priv *wil)
 
 	mutex_lock(&wil->halp.lock);
 
-	wil_dbg_misc(wil, "%s: start, HALP ref_cnt (%d)\n", __func__,
-		     wil->halp.ref_cnt);
+	wil_dbg_irq(wil, "%s: start, HALP ref_cnt (%d)\n", __func__,
+		    wil->halp.ref_cnt);
 
 	if (++wil->halp.ref_cnt == 1) {
 		wil6210_set_halp(wil);
@@ -1129,15 +1129,15 @@ void wil_halp_vote(struct wil6210_priv *wil)
 			/* Mask HALP as done in case the interrupt is raised */
 			wil6210_mask_halp(wil);
 		} else {
-			wil_dbg_misc(wil,
-				     "%s: HALP vote completed after %d ms\n",
-				     __func__,
-				     jiffies_to_msecs(to_jiffies - rc));
+			wil_dbg_irq(wil,
+				    "%s: HALP vote completed after %d ms\n",
+				    __func__,
+				    jiffies_to_msecs(to_jiffies - rc));
 		}
 	}
 
-	wil_dbg_misc(wil, "%s: end, HALP ref_cnt (%d)\n", __func__,
-		     wil->halp.ref_cnt);
+	wil_dbg_irq(wil, "%s: end, HALP ref_cnt (%d)\n", __func__,
+		    wil->halp.ref_cnt);
 
 	mutex_unlock(&wil->halp.lock);
 }
@@ -1148,16 +1148,16 @@ void wil_halp_unvote(struct wil6210_priv *wil)
 
 	mutex_lock(&wil->halp.lock);
 
-	wil_dbg_misc(wil, "%s: start, HALP ref_cnt (%d)\n", __func__,
-		     wil->halp.ref_cnt);
+	wil_dbg_irq(wil, "%s: start, HALP ref_cnt (%d)\n", __func__,
+		    wil->halp.ref_cnt);
 
 	if (--wil->halp.ref_cnt == 0) {
 		wil6210_clear_halp(wil);
-		wil_dbg_misc(wil, "%s: HALP unvote\n", __func__);
+		wil_dbg_irq(wil, "%s: HALP unvote\n", __func__);
 	}
 
-	wil_dbg_misc(wil, "%s: end, HALP ref_cnt (%d)\n", __func__,
-		     wil->halp.ref_cnt);
+	wil_dbg_irq(wil, "%s: end, HALP ref_cnt (%d)\n", __func__,
+		    wil->halp.ref_cnt);
 
 	mutex_unlock(&wil->halp.lock);
 }