Merge tag 'asoc-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.8

Very quiet release for ASoC really:

- Standardisation of the logging.
- DT and dmaengine support for Atmel.
- Support for Wolfson ADSP cores.
- New drivers for Freescale/iVeia P1022 and Maxim MAX98090.

CREDITS

@@ -1823,6 +1823,11 @@ S: Kattreinstr 38
 S: D-64295
 S: Germany
 
+N: Avi Kivity
+E: avi.kivity@gmail.com
+D: Kernel-based Virtual Machine (KVM)
+S: Ra'annana, Israel
+
 N: Andi Kleen
 E: andi@firstfloor.org
 U: http://www.halobates.de

Documentation/devicetree/bindings/misc/atmel-ssc.txt

@@ -0,0 +1,15 @@
+* Atmel SSC driver.
+
+Required properties:
+- compatible: "atmel,at91rm9200-ssc" or "atmel,at91sam9g45-ssc"
+	- atmel,at91rm9200-ssc: support pdc transfer
+	- atmel,at91sam9g45-ssc: support dma transfer
+- reg: Should contain SSC registers location and length
+- interrupts: Should contain SSC interrupt
+
+Example:
+ssc0: ssc@fffbc000 {
+	compatible = "atmel,at91rm9200-ssc";
+	reg = <0xfffbc000 0x4000>;
+	interrupts = <14 4 5>;
+};

Documentation/devicetree/bindings/net/mdio-gpio.txt

@@ -8,9 +8,16 @@ gpios property as described in section VIII.1 in the following order:
 
 MDC, MDIO.
 
+Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+node.
+
 Example:
 
-mdio {
+aliases {
+	mdio-gpio0 = <&mdio0>;
+};
+
+mdio0: mdio {
 	compatible = "virtual,mdio-gpio";
 	#address-cells = <1>;
 	#size-cells = <0>;

Documentation/devicetree/bindings/sound/ak4104.txt

@@ -0,0 +1,22 @@
+AK4104 S/PDIF transmitter
+
+This device supports SPI mode only.
+
+Required properties:
+
+  - compatible : "asahi-kasei,ak4104"
+
+  - reg : The chip select number on the SPI bus
+
+Optional properties:
+
+  - reset-gpio : a GPIO spec for the reset pin. If specified, it will be
+		 deasserted before communication to the device starts.
+
+Example:
+
+spdif: ak4104@0 {
+	compatible = "asahi-kasei,ak4104";
+	reg = <0>;
+	spi-max-frequency = <5000000>;
+};

Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt

@@ -0,0 +1,26 @@
+* Atmel at91sam9g20ek wm8731 audio complex
+
+Required properties:
+  - compatible: "atmel,at91sam9g20ek-wm8731-audio"
+  - atmel,model: The user-visible name of this sound complex.
+  - atmel,audio-routing: A list of the connections between audio components.
+  - atmel,ssc-controller: The phandle of the SSC controller
+  - atmel,audio-codec: The phandle of the WM8731 audio codec
+Optional properties:
+  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound {
+	compatible = "atmel,at91sam9g20ek-wm8731-audio";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+	atmel,model = "wm8731 @ AT91SAMG20EK";
+
+	atmel,audio-routing =
+		"Ext Spk", "LHPOUT",
+		"Int MIC", "MICIN";
+
+	atmel,ssc-controller = <&ssc0>;
+	atmel,audio-codec = <&wm8731>;
+};

Documentation/devicetree/bindings/sound/cs4271.txt

@@ -18,6 +18,8 @@ Optional properties:
 
  - reset-gpio: 	a GPIO spec to define which pin is connected to the chip's
 		!RESET pin
+ - cirrus,amuteb-eq-bmutec:	When given, the Codec's AMUTEB=BMUTEC flag
+				is enabled.
 
 Examples:
 

Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt

@@ -12,7 +12,7 @@ Required properties:
 
 Optional properties:
 - ti,dmic: phandle for the OMAP dmic node if the machine have it connected
-- ti,jack_detection: Need to be set to <1> if the board capable to detect jack
+- ti,jack_detection: Need to be present if the board capable to detect jack
   insertion, removal.
 
 Available audio endpoints for the audio-routing table:
@@ -59,7 +59,7 @@ sound {
 	compatible = "ti,abe-twl6040";
 	ti,model = "SDP4430";
 
-	ti,jack-detection = <1>;
+	ti,jack-detection;
 	ti,mclk-freq = <38400000>;
 
 	ti,mcpdm = <&mcpdm>;

Documentation/networking/vxlan.txt

@@ -32,7 +32,7 @@ no entry is in the forwarding table.
   # ip link delete vxlan0
 
 3. Show vxlan info
-  # ip -d show vxlan0
+  # ip -d link show vxlan0
 
 It is possible to create, destroy and display the vxlan
 forwarding table using the new bridge command.
@@ -41,7 +41,7 @@ forwarding table using the new bridge command.
   # bridge fdb add to 00:17:42:8a:b4:05 dst 192.19.0.2 dev vxlan0
 
 2. Delete forwarding table entry
-  # bridge fdb delete 00:17:42:8a:b4:05
+  # bridge fdb delete 00:17:42:8a:b4:05 dev vxlan0
 
 3. Show forwarding table
   # bridge fdb show dev vxlan0

MAINTAINERS

@@ -526,17 +526,17 @@ F:	drivers/video/geode/
 F:	arch/x86/include/asm/geode.h
 
 AMD IOMMU (AMD-VI)
-M:	Joerg Roedel <joerg.roedel@amd.com>
+M:	Joerg Roedel <joro@8bytes.org>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
-S:	Supported
+S:	Maintained
 F:	drivers/iommu/amd_iommu*.[ch]
 F:	include/linux/amd-iommu.h
 
 AMD MICROCODE UPDATE SUPPORT
-M:	Andreas Herrmann <andreas.herrmann3@amd.com>
+M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
 L:	amd64-microcode@amd64.org
-S:	Supported
+S:	Maintained
 F:	arch/x86/kernel/microcode_amd.c
 
 AMS (Apple Motion Sensor) DRIVER
@@ -841,6 +841,14 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	arch/arm/mach-sa1100/jornada720.c
 F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
+ARM/IGEP MACHINE SUPPORT
+M:	Enric Balletbo i Serra <eballetbo@gmail.com>
+M:	Javier Martinez Canillas <javier@dowhile0.org>
+L:	linux-omap@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-omap2/board-igep0020.c
+
 ARM/INCOME PXA270 SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2708,10 +2716,10 @@ F:	include/linux/edac.h
 
 EDAC-AMD64
 M:	Doug Thompson <dougthompson@xmission.com>
-M:	Borislav Petkov <borislav.petkov@amd.com>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
-S:	Supported
+S:	Maintained
 F:	drivers/edac/amd64_edac*
 
 EDAC-E752X
@@ -3753,7 +3761,7 @@ S:	Maintained
 F:	drivers/platform/x86/ideapad-laptop.c
 
 IDE/ATAPI DRIVERS
-M:	Borislav Petkov <petkovbb@gmail.com>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	Documentation/cdrom/ide-cd
@@ -4280,8 +4288,8 @@ F:	include/linux/lockd/
 F:	include/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
-M:	Avi Kivity <avi@redhat.com>
 M:	Marcelo Tosatti <mtosatti@redhat.com>
+M:	Gleb Natapov <gleb@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -5413,7 +5421,7 @@ S:	Maintained
 F:	sound/drivers/opl4/
 
 OPROFILE
-M:	Robert Richter <robert.richter@amd.com>
+M:	Robert Richter <rric@kernel.org>
 L:	oprofile-list@lists.sf.net
 S:	Maintained
 F:	arch/*/include/asm/oprofile*.h
@@ -8198,7 +8206,7 @@ F:	drivers/platform/x86
 
 X86 MCE INFRASTRUCTURE
 M:	Tony Luck <tony.luck@intel.com>
-M:	Borislav Petkov <bp@amd64.org>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	arch/x86/kernel/cpu/mcheck/*

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*

arch/alpha/kernel/osf_sys.c

@@ -445,7 +445,7 @@ struct procfs_args {
  * unhappy with OSF UFS. [CHECKME]
  */
 static int
-osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
+osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -465,7 +465,7 @@ osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
 }
 
 static int
-osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
+osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -485,7 +485,7 @@ osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
 }
 
 static int
-osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
+osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags)
 {
 	struct procfs_args tmp;
 

arch/arm/boot/dts/at91sam9260.dtsi

@@ -29,6 +29,7 @@
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
 		i2c0 = &i2c0;
+		ssc0 = &ssc0;
 	};
 	cpus {
 		cpu@0 {
@@ -212,6 +213,13 @@
 				status = "disabled";
 			};
 
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 4 5>;
+				status = "disable";
+			};
+
 			adc0: adc@fffe0000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffe0000 0x100>;

arch/arm/boot/dts/at91sam9263.dtsi

@@ -25,6 +25,8 @@
 		gpio4 = &pioE;
 		tcb0 = &tcb0;
 		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
 	};
 	cpus {
 		cpu@0 {
@@ -173,6 +175,20 @@
 				status = "disabled";
 			};
 
+			ssc0: ssc@fff98000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfff98000 0x4000>;
+				interrupts = <16 4 5>;
+				status = "disable";
+			};
+
+			ssc1: ssc@fff9c000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfff9c000 0x4000>;
+				interrupts = <17 4 5>;
+				status = "disable";
+			};
+
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;

arch/arm/boot/dts/at91sam9g20ek_common.dtsi

@@ -30,6 +30,16 @@
 
 	ahb {
 		apb {
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<2 1 0x2 0x0>;	/* PC1 periph B */
+					};
+
+				};
+			};
+
 			dbgu: serial@fffff200 {
 				status = "okay";
 			};
@@ -51,6 +61,11 @@
 				atmel,vbus-gpio = <&pioC 5 0>;
 				status = "okay";
 			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
 		};
 
 		nand0: nand@40000000 {
@@ -114,7 +129,7 @@
 			reg = <0x50>;
 		};
 
-		wm8731@1b {
+		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
 		};
@@ -139,4 +154,19 @@
 			gpio-key,wakeup;
 		};
 	};
+
+	sound {
+		compatible = "atmel,at91sam9g20ek-wm8731-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+		atmel,model = "wm8731 @ AT91SAMG20EK";
+
+		atmel,audio-routing =
+			"Ext Spk", "LHPOUT",
+			"Int Mic", "MICIN";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
 };

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -31,6 +31,8 @@
 		tcb1 = &tcb1;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
 	};
 	cpus {
 		cpu@0 {
@@ -226,6 +228,20 @@
 				status = "disabled";
 			};
 
+			ssc0: ssc@fff9c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfff9c000 0x4000>;
+				interrupts = <16 4 5>;
+				status = "disable";
+			};
+
+			ssc1: ssc@fffa0000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <17 4 5>;
+				status = "disable";
+			};
+
 			adc0: adc@fffb0000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffb0000 0x100>;

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -30,6 +30,7 @@
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
+		ssc0 = &ssc0;
 	};
 	cpus {
 		cpu@0 {
@@ -87,6 +88,13 @@
 				interrupts = <1 4 7>;
 			};
 
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 4 5>;
+				status = "disable";
+			};
+
 			tcb0: timer@f8008000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;

arch/arm/mach-at91/at91rm9200.c

@@ -184,9 +184,12 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.2", &ssc2_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fffd0000.ssc", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fffd4000.ssc", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fffd8000.ssc", &ssc2_clk),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),

arch/arm/mach-at91/at91rm9200_devices.c

@@ -752,7 +752,7 @@ static struct resource ssc0_resources[] = {
 };
 
 static struct platform_device at91rm9200_ssc0_device = {
-	.name	= "ssc",
+	.name	= "at91rm9200_ssc",
 	.id	= 0,
 	.dev	= {
 		.dma_mask		= &ssc0_dmamask,
@@ -794,7 +794,7 @@ static struct resource ssc1_resources[] = {
 };
 
 static struct platform_device at91rm9200_ssc1_device = {
-	.name	= "ssc",
+	.name	= "at91rm9200_ssc",
 	.id	= 1,
 	.dev	= {
 		.dma_mask		= &ssc1_dmamask,
@@ -836,7 +836,7 @@ static struct resource ssc2_resources[] = {
 };
 
 static struct platform_device at91rm9200_ssc2_device = {
-	.name	= "ssc",
+	.name	= "at91rm9200_ssc",
 	.id	= 2,
 	.dev	= {
 		.dma_mask		= &ssc2_dmamask,

arch/arm/mach-at91/at91sam9260.c

@@ -210,7 +210,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc_clk),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk),
 	/* more usart lookup table for DT entries */

arch/arm/mach-at91/at91sam9260_devices.c

@@ -742,7 +742,7 @@ static struct resource ssc_resources[] = {
 };
 
 static struct platform_device at91sam9260_ssc_device = {
-	.name	= "ssc",
+	.name	= "at91rm9200_ssc",
 	.id	= 0,
 	.dev	= {
 		.dma_mask		= &ssc_dmamask,

arch/arm/mach-at91/at91sam9261.c

@@ -174,9 +174,12 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.2", &ssc2_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc2_clk),
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk),

arch/arm/mach-at91/at91sam9261_devices.c

@@ -706,7 +706,7 @@ static struct resource ssc0_resources[] = {
 };
 
 static struct platform_device at91sam9261_ssc0_device = {
-	.name	= "ssc",
+	.name	= "at91rm9200_ssc",
 	.id	= 0,
 	.dev	= {
 		.dma_mask		= &ssc0_dmamask,
@@ -748,7 +748,7 @@ static struct resource ssc1_resources[] = {
 };
 
 static struct platform_device at91sam9261_ssc1_device = {
-	.name	= "ssc",
+	.name	= "at91rm9200_ssc",
 	.id	= 1,
 	.dev	= {
 		.dma_mask		= &ssc1_dmamask,
@@ -790,7 +790,7 @@ static struct resource ssc2_resources[] = {
 };
 
 static struct platform_device at91sam9261_ssc2_device = {
-	.name	= "ssc",
+	.name	= "at91rm9200_ssc",
 	.id	= 2,
 	.dev	= {
 		.dma_mask		= &ssc2_dmamask,

arch/arm/mach-at91/at91sam9263.c

@@ -186,8 +186,10 @@ static struct clk *periph_clocks[] __initdata = {
 static struct clk_lookup periph_clocks_lookups[] = {
 	/* One additional fake clock for macb_hclk */
 	CLKDEV_CON_ID("hclk", &macb_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),

arch/arm/mach-at91/at91sam9263_devices.c

@@ -1199,7 +1199,7 @@ static struct resource ssc0_resources[] = {
 };
 
 static struct platform_device at91sam9263_ssc0_device = {
-	.name	= "ssc",
+	.name	= "at91rm9200_ssc",
 	.id	= 0,
 	.dev	= {
 		.dma_mask		= &ssc0_dmamask,
@@ -1241,7 +1241,7 @@ static struct resource ssc1_resources[] = {
 };
 
 static struct platform_device at91sam9263_ssc1_device = {
-	.name	= "ssc",
+	.name	= "at91rm9200_ssc",
 	.id	= 1,
 	.dev	= {
 		.dma_mask		= &ssc1_dmamask,

arch/arm/mach-at91/at91sam9g45.c

@@ -239,8 +239,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi0_clk),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fffa0000.ssc", &ssc1_clk),
 	CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
 	CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk),
 	CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk),

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1459,7 +1459,7 @@ static struct resource ssc0_resources[] = {
 };
 
 static struct platform_device at91sam9g45_ssc0_device = {
-	.name	= "ssc",
+	.name	= "at91sam9g45_ssc",
 	.id	= 0,
 	.dev	= {
 		.dma_mask		= &ssc0_dmamask,
@@ -1501,7 +1501,7 @@ static struct resource ssc1_resources[] = {
 };
 
 static struct platform_device at91sam9g45_ssc1_device = {
-	.name	= "ssc",
+	.name	= "at91sam9g45_ssc",
 	.id	= 1,
 	.dev	= {
 		.dma_mask		= &ssc1_dmamask,

arch/arm/mach-at91/at91sam9rl.c

@@ -184,8 +184,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc1_clk),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -832,7 +832,7 @@ static struct resource ssc0_resources[] = {
 };
 
 static struct platform_device at91sam9rl_ssc0_device = {
-	.name	= "ssc",
+	.name	= "at91rm9200_ssc",
 	.id	= 0,
 	.dev	= {
 		.dma_mask		= &ssc0_dmamask,
@@ -874,7 +874,7 @@ static struct resource ssc1_resources[] = {
 };
 
 static struct platform_device at91sam9rl_ssc1_device = {
-	.name	= "ssc",
+	.name	= "at91rm9200_ssc",
 	.id	= 1,
 	.dev	= {
 		.dma_mask		= &ssc1_dmamask,

arch/arm/mach-at91/at91sam9x5.c

@@ -231,6 +231,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "f0010000.ssc", &ssc_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk),

arch/arm/mach-at91/board-sam9g20ek.c

@@ -353,6 +353,16 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
         },
 };
 
+static struct platform_device sam9g20ek_audio_device = {
+	.name   = "at91sam9g20ek-audio",
+	.id     = -1,
+};
+
+static void __init ek_add_device_audio(void)
+{
+	platform_device_register(&sam9g20ek_audio_device);
+}
+
 
 static void __init ek_board_init(void)
 {
@@ -394,6 +404,7 @@ static void __init ek_board_init(void)
 	at91_set_B_periph(AT91_PIN_PC1, 0);
 	/* SSC (for WM8731) */
 	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+	ek_add_device_audio();
 }
 
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")

arch/arm/mach-davinci/board-da850-evm.c

@@ -762,16 +762,19 @@ static u8 da850_iis_serializer_direction[] = {
 };
 
 static struct snd_platform_data da850_evm_snd_data = {
-	.tx_dma_offset	= 0x2000,
-	.rx_dma_offset	= 0x2000,
-	.op_mode	= DAVINCI_MCASP_IIS_MODE,
-	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
-	.tdm_slots	= 2,
-	.serial_dir	= da850_iis_serializer_direction,
-	.asp_chan_q	= EVENTQ_0,
-	.version	= MCASP_VERSION_2,
-	.txnumevt	= 1,
-	.rxnumevt	= 1,
+	.tx_dma_offset		= 0x2000,
+	.rx_dma_offset		= 0x2000,
+	.op_mode		= DAVINCI_MCASP_IIS_MODE,
+	.num_serializer		= ARRAY_SIZE(da850_iis_serializer_direction),
+	.tdm_slots		= 2,
+	.serial_dir		= da850_iis_serializer_direction,
+	.asp_chan_q		= EVENTQ_0,
+	.ram_chan_q		= EVENTQ_1,
+	.version		= MCASP_VERSION_2,
+	.txnumevt		= 1,
+	.rxnumevt		= 1,
+	.sram_size_playback	= SZ_8K,
+	.sram_size_capture	= SZ_8K,
 };
 
 static const short da850_evm_mcasp_pins[] __initconst = {
@@ -1509,6 +1512,7 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
 				ret);
 
+	da850_evm_snd_data.sram_pool = sram_get_gen_pool();
 	da8xx_register_mcasp(0, &da850_evm_snd_data);
 
 	ret = davinci_cfg_reg_list(da850_lcdcntl_pins);

arch/arm/mach-davinci/dm644x.c

@@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
 		break;
 	case VPBE_ENC_CUSTOM_TIMINGS:
 		if (pclock <= 27000000) {
-			v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
-			     DM644X_VPSS_DACCLKEN;
+			v |= DM644X_VPSS_DACCLKEN;
 			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
 		} else {
 			/*

arch/arm/mach-exynos/dma.c

@@ -275,6 +275,9 @@ static int __init exynos_dma_init(void)
 		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma1_peri);
 		exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+
+		if (samsung_rev() == EXYNOS4210_REV_0)
+			exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
 	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma0_peri);

arch/arm/mach-exynos/include/mach/map.h

@@ -90,6 +90,7 @@
 
 #define EXYNOS4_PA_MDMA0		0x10810000
 #define EXYNOS4_PA_MDMA1		0x12850000
+#define EXYNOS4_PA_S_MDMA1		0x12840000
 #define EXYNOS4_PA_PDMA0		0x12680000
 #define EXYNOS4_PA_PDMA1		0x12690000
 #define EXYNOS5_PA_MDMA0		0x10800000

arch/arm/mach-omap2/board-igep0020.c

@@ -580,6 +580,11 @@ static void __init igep_wlan_bt_init(void)
 	} else
 		return;
 
+	/* Make sure that the GPIO pins are muxed correctly */
+	omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
 	err = gpio_request_array(igep_wlan_bt_gpios,
 				 ARRAY_SIZE(igep_wlan_bt_gpios));
 	if (err) {

arch/arm/mach-omap2/common-board-devices.c

@@ -64,30 +64,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
 	int err;
 
-	err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
-	if (err) {
-		pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
-		return;
-	}
+	/*
+	 * If a board defines get_pendown_state() function, request the pendown
+	 * GPIO and set the GPIO debounce time.
+	 * If a board does not define the get_pendown_state() function, then
+	 * the ads7846 driver will setup the pendown GPIO itself.
+	 */
+	if (board_pdata && board_pdata->get_pendown_state) {
+		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+		if (err) {
+			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+			return;
+		}
 
-	if (gpio_debounce)
-		gpio_set_debounce(gpio_pendown, gpio_debounce);
+		if (gpio_debounce)
+			gpio_set_debounce(gpio_pendown, gpio_debounce);
+
+		gpio_export(gpio_pendown, 0);
+	}
 
 	spi_bi->bus_num	= bus_num;
 	spi_bi->irq	= gpio_to_irq(gpio_pendown);
 
+	ads7846_config.gpio_pendown = gpio_pendown;
+
 	if (board_pdata) {
 		board_pdata->gpio_pendown = gpio_pendown;
+		board_pdata->gpio_pendown_debounce = gpio_debounce;
 		spi_bi->platform_data = board_pdata;
-		if (board_pdata->get_pendown_state)
-			gpio_export(gpio_pendown, 0);
-	} else {
-		ads7846_config.gpio_pendown = gpio_pendown;
 	}
 
-	if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
-		gpio_free(gpio_pendown);
-
 	spi_register_board_info(&ads7846_spi_board_info, 1);
 }
 #else

arch/arm/mach-omap2/twl-common.c

@@ -73,6 +73,7 @@ void __init omap4_pmic_init(const char *pmic_type,
 {
 	/* PMIC part*/
 	omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
+	omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
 	omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
 
 	/* Register additional devices on i2c1 bus if needed */

arch/arm/plat-omap/i2c.c

@@ -26,12 +26,14 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c-omap.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 
 #include <mach/irqs.h>
 #include <plat/i2c.h>
+#include <plat/omap-pm.h>
 #include <plat/omap_device.h>
 
 #define OMAP_I2C_SIZE		0x3f
@@ -127,6 +129,16 @@ static inline int omap1_i2c_add_bus(int bus_id)
 
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+	omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
 static inline int omap2_i2c_add_bus(int bus_id)
 {
 	int l;
@@ -158,6 +170,15 @@ static inline int omap2_i2c_add_bus(int bus_id)
 	dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
 	pdata->flags = dev_attr->flags;
 
+	/*
+	 * When waiting for completion of a i2c transfer, we need to
+	 * set a wake up latency constraint for the MPU. This is to
+	 * ensure quick enough wakeup from idle, when transfer
+	 * completes.
+	 * Only omap3 has support for constraints
+	 */
+	if (cpu_is_omap34xx())
+		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
 	pdev = omap_device_build(name, bus_id, oh, pdata,
 			sizeof(struct omap_i2c_bus_platform_data),
 			NULL, 0, 0);

arch/m68k/include/asm/signal.h

@@ -41,7 +41,7 @@ struct k_sigaction {
 static inline void sigaddset(sigset_t *set, int _sig)
 {
 	asm ("bfset %0{%1,#1}"
-		: "+od" (*set)
+		: "+o" (*set)
 		: "id" ((_sig - 1) ^ 31)
 		: "cc");
 }
@@ -49,7 +49,7 @@ static inline void sigaddset(sigset_t *set, int _sig)
 static inline void sigdelset(sigset_t *set, int _sig)
 {
 	asm ("bfclr %0{%1,#1}"
-		: "+od" (*set)
+		: "+o" (*set)
 		: "id" ((_sig - 1) ^ 31)
 		: "cc");
 }
@@ -65,7 +65,7 @@ static inline int __gen_sigismember(sigset_t *set, int _sig)
 	int ret;
 	asm ("bfextu %1{%2,#1},%0"
 		: "=d" (ret)
-		: "od" (*set), "id" ((_sig-1) ^ 31)
+		: "o" (*set), "id" ((_sig-1) ^ 31)
 		: "cc");
 	return ret;
 }

arch/mips/kernel/setup.c

@@ -79,7 +79,7 @@ static struct resource data_resource = { .name = "Kernel data", };
 void __init add_memory_region(phys_t start, phys_t size, long type)
 {
 	int x = boot_mem_map.nr_map;
-	struct boot_mem_map_entry *prev = boot_mem_map.map + x - 1;
+	int i;
 
 	/* Sanity check */
 	if (start + size < start) {
@@ -88,15 +88,29 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
 	}
 
 	/*
-	 * Try to merge with previous entry if any.  This is far less than
-	 * perfect but is sufficient for most real world cases.
+	 * Try to merge with existing entry, if any.
 	 */
-	if (x && prev->addr + prev->size == start && prev->type == type) {
-		prev->size += size;
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		struct boot_mem_map_entry *entry = boot_mem_map.map + i;
+		unsigned long top;
+
+		if (entry->type != type)
+			continue;
+
+		if (start + size < entry->addr)
+			continue;			/* no overlap */
+
+		if (entry->addr + entry->size < start)
+			continue;			/* no overlap */
+
+		top = max(entry->addr + entry->size, start + size);
+		entry->addr = min(entry->addr, start);
+		entry->size = top - entry->addr;
+
 		return;
 	}
 
-	if (x == BOOT_MEM_MAP_MAX) {
+	if (boot_mem_map.nr_map == BOOT_MEM_MAP_MAX) {
 		pr_err("Ooops! Too many entries in the memory map!\n");
 		return;
 	}

arch/mips/lib/mips-atomic.c

@@ -56,7 +56,7 @@ __asm__(
 	"	.set	pop						\n"
 	"	.endm							\n");
 
-void arch_local_irq_disable(void)
+notrace void arch_local_irq_disable(void)
 {
 	preempt_disable();
 	__asm__ __volatile__(
@@ -93,7 +93,7 @@ __asm__(
 	"	.set	pop						\n"
 	"	.endm							\n");
 
-unsigned long arch_local_irq_save(void)
+notrace unsigned long arch_local_irq_save(void)
 {
 	unsigned long flags;
 	preempt_disable();
@@ -135,7 +135,7 @@ __asm__(
 	"	.set	pop						\n"
 	"	.endm							\n");
 
-void arch_local_irq_restore(unsigned long flags)
+notrace void arch_local_irq_restore(unsigned long flags)
 {
 	unsigned long __tmp1;
 
@@ -159,7 +159,7 @@ void arch_local_irq_restore(unsigned long flags)
 EXPORT_SYMBOL(arch_local_irq_restore);
 
 
-void __arch_local_irq_restore(unsigned long flags)
+notrace void __arch_local_irq_restore(unsigned long flags)
 {
 	unsigned long __tmp1;
 

arch/parisc/kernel/signal32.c

@@ -65,7 +65,8 @@ put_sigset32(compat_sigset_t __user *up, sigset_t *set, size_t sz)
 {
 	compat_sigset_t s;
 
-	if (sz != sizeof *set) panic("put_sigset32()");
+	if (sz != sizeof *set)
+		return -EINVAL;
 	sigset_64to32(&s, set);
 
 	return copy_to_user(up, &s, sizeof s);
@@ -77,7 +78,8 @@ get_sigset32(compat_sigset_t __user *up, sigset_t *set, size_t sz)
 	compat_sigset_t s;
 	int r;
 
-	if (sz != sizeof *set) panic("put_sigset32()");
+	if (sz != sizeof *set)
+		return -EINVAL;
 
 	if ((r = copy_from_user(&s, up, sz)) == 0) {
 		sigset_32to64(set, &s);

arch/parisc/kernel/sys_parisc.c

@@ -73,6 +73,8 @@ static unsigned long get_shared_area(struct address_space *mapping,
 	struct vm_area_struct *vma;
 	int offset = mapping ? get_offset(mapping) : 0;
 
+	offset = (offset + (pgoff << PAGE_SHIFT)) & 0x3FF000;
+
 	addr = DCACHE_ALIGN(addr - offset) + offset;
 
 	for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) {

arch/powerpc/boot/dts/mpc5200b.dtsi

@@ -231,6 +231,12 @@
 			interrupts = <2 7 0>;
 		};
 
+		sclpc@3c00 {
+			compatible = "fsl,mpc5200-lpbfifo";
+			reg = <0x3c00 0x60>;
+			interrupts = <2 23 0>;
+		};
+
 		i2c@3d00 {
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/powerpc/boot/dts/o2d.dtsi

@@ -86,12 +86,6 @@
 				reg = <0>;
 			};
 		};
-
-		sclpc@3c00 {
-			compatible = "fsl,mpc5200-lpbfifo";
-			reg = <0x3c00 0x60>;
-			interrupts = <3 23 0>;
-		};
 	};
 
 	localbus {

arch/powerpc/boot/dts/pcm030.dts

@@ -59,7 +59,7 @@
 			#gpio-cells = <2>;
 		};
 
-		psc@2000 { /* PSC1 in ac97 mode */
+		audioplatform: psc@2000 { /* PSC1 in ac97 mode */
 			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
 			cell-index = <0>;
 		};
@@ -134,4 +134,9 @@
 	localbus {
 		status = "disabled";
 	};
+
+	sound {
+		compatible = "phytec,pcm030-audio-fabric";
+		asoc-platform = <&audioplatform>;
+	};
 };

arch/powerpc/platforms/52xx/mpc52xx_pic.c

@@ -372,10 +372,11 @@ static int mpc52xx_irqhost_map(struct irq_domain *h, unsigned int virq,
 	case MPC52xx_IRQ_L1_MAIN: irqchip = &mpc52xx_main_irqchip; break;
 	case MPC52xx_IRQ_L1_PERP: irqchip = &mpc52xx_periph_irqchip; break;
 	case MPC52xx_IRQ_L1_SDMA: irqchip = &mpc52xx_sdma_irqchip; break;
-	default:
-		pr_err("%s: invalid irq: virq=%i, l1=%i, l2=%i\n",
-		       __func__, virq, l1irq, l2irq);
-		return -EINVAL;
+	case MPC52xx_IRQ_L1_CRIT:
+		pr_warn("%s: Critical IRQ #%d is unsupported! Nopping it.\n",
+			__func__, l2irq);
+		irq_set_chip(virq, &no_irq_chip);
+		return 0;
 	}
 
 	irq_set_chip_and_handler(virq, irqchip, handle_level_irq);

arch/powerpc/platforms/pseries/eeh_pe.c

@@ -449,7 +449,7 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
 			if (list_empty(&pe->edevs)) {
 				cnt = 0;
 				list_for_each_entry(child, &pe->child_list, child) {
-					if (!(pe->type & EEH_PE_INVALID)) {
+					if (!(child->type & EEH_PE_INVALID)) {
 						cnt++;
 						break;
 					}

arch/powerpc/platforms/pseries/msi.c

@@ -220,7 +220,8 @@ static struct device_node *find_pe_dn(struct pci_dev *dev, int *total)
 
 	/* Get the top level device in the PE */
 	edev = of_node_to_eeh_dev(dn);
-	edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
+	if (edev->pe)
+		edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
 	dn = eeh_dev_to_of_node(edev);
 	if (!dn)
 		return NULL;

arch/sparc/include/asm/prom.h

@@ -63,10 +63,13 @@ extern char *of_console_options;
 extern void irq_trans_init(struct device_node *dp);
 extern char *build_path_component(struct device_node *dp);
 
-/* SPARC has a local implementation */
+/* SPARC has local implementations */
 extern int of_address_to_resource(struct device_node *dev, int index,
 				  struct resource *r);
 #define of_address_to_resource of_address_to_resource
 
+void __iomem *of_iomap(struct device_node *node, int index);
+#define of_iomap of_iomap
+
 #endif /* __KERNEL__ */
 #endif /* _SPARC_PROM_H */

arch/sparc/kernel/signal_64.c

@@ -295,9 +295,7 @@ void do_rt_sigreturn(struct pt_regs *regs)
 		err |= restore_fpu_state(regs, fpu_save);
 
 	err |= __copy_from_user(&set, &sf->mask, sizeof(sigset_t));
-	err |= do_sigaltstack(&sf->stack, NULL, (unsigned long)sf);
-
-	if (err)
+	if (err || do_sigaltstack(&sf->stack, NULL, (unsigned long)sf) == -EFAULT)
 		goto segv;
 
 	err |= __get_user(rwin_save, &sf->rwin_save);

arch/x86/boot/compressed/eboot.c

@@ -12,6 +12,8 @@
 #include <asm/setup.h>
 #include <asm/desc.h>
 
+#undef memcpy			/* Use memcpy from misc.c */
+
 #include "eboot.h"
 
 static efi_system_table_t *sys_table;

arch/x86/boot/header.S

@@ -476,6 +476,3 @@ die:
 setup_corrupt:
 	.byte	7
 	.string	"No setup signature found...\n"
-
-	.data
-dummy:	.long	0

arch/x86/include/asm/ptrace.h

@@ -205,21 +205,14 @@ static inline bool user_64bit_mode(struct pt_regs *regs)
 }
 #endif
 
-/*
- * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
- * when it traps.  The previous stack will be directly underneath the saved
- * registers, and 'sp/ss' won't even have been saved. Thus the '&regs->sp'.
- *
- * This is valid only for kernel mode traps.
- */
-static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
-{
 #ifdef CONFIG_X86_32
-	return (unsigned long)(&regs->sp);
+extern unsigned long kernel_stack_pointer(struct pt_regs *regs);
 #else
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
 	return regs->sp;
-#endif
 }
+#endif
 
 #define GET_IP(regs) ((regs)->ip)
 #define GET_FP(regs) ((regs)->bp)

arch/x86/kernel/cpu/amd.c

@@ -631,6 +631,20 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		}
 	}
 
+	/*
+	 * The way access filter has a performance penalty on some workloads.
+	 * Disable it on the affected CPUs.
+	 */
+	if ((c->x86 == 0x15) &&
+	    (c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
+		u64 val;
+
+		if (!rdmsrl_safe(0xc0011021, &val) && !(val & 0x1E)) {
+			val |= 0x1E;
+			wrmsrl_safe(0xc0011021, val);
+		}
+	}
+
 	cpu_detect_cache_sizes(c);
 
 	/* Multi core CPU? */

arch/x86/kernel/cpu/mcheck/mce_amd.c

@@ -6,7 +6,7 @@
  *
  *  Written by Jacob Shin - AMD, Inc.
  *
- *  Support: borislav.petkov@amd.com
+ *  Maintained by: Borislav Petkov <bp@alien8.de>
  *
  *  April 2006
  *     - added support for AMD Family 0x10 processors

arch/x86/kernel/cpu/mcheck/mce_intel.c

@@ -285,34 +285,39 @@ void cmci_clear(void)
 	raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
 }
 
+static long cmci_rediscover_work_func(void *arg)
+{
+	int banks;
+
+	/* Recheck banks in case CPUs don't all have the same */
+	if (cmci_supported(&banks))
+		cmci_discover(banks);
+
+	return 0;
+}
+
 /*
  * After a CPU went down cycle through all the others and rediscover
  * Must run in process context.
  */
 void cmci_rediscover(int dying)
 {
-	int banks;
-	int cpu;
-	cpumask_var_t old;
+	int cpu, banks;
 
 	if (!cmci_supported(&banks))
 		return;
-	if (!alloc_cpumask_var(&old, GFP_KERNEL))
-		return;
-	cpumask_copy(old, &current->cpus_allowed);
 
 	for_each_online_cpu(cpu) {
 		if (cpu == dying)
 			continue;
-		if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
+
+		if (cpu == smp_processor_id()) {
+			cmci_rediscover_work_func(NULL);
 			continue;
-		/* Recheck banks in case CPUs don't all have the same */
-		if (cmci_supported(&banks))
-			cmci_discover(banks);
-	}
+		}
 
-	set_cpus_allowed_ptr(current, old);
-	free_cpumask_var(old);
+		work_on_cpu(cpu, cmci_rediscover_work_func, NULL);
+	}
 }
 
 /*

arch/x86/kernel/entry_64.S

@@ -995,8 +995,8 @@ END(interrupt)
 	 */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
 common_interrupt:
-	ASM_CLAC
 	XCPT_FRAME
+	ASM_CLAC
 	addq $-0x80,(%rsp)		/* Adjust vector to [-256,-1] range */
 	interrupt do_IRQ
 	/* 0(%rsp): old_rsp-ARGOFFSET */
@@ -1135,8 +1135,8 @@ END(common_interrupt)
  */
 .macro apicinterrupt num sym do_sym
 ENTRY(\sym)
-	ASM_CLAC
 	INTR_FRAME
+	ASM_CLAC
 	pushq_cfi $~(\num)
 .Lcommon_\sym:
 	interrupt \do_sym
@@ -1190,8 +1190,8 @@ apicinterrupt IRQ_WORK_VECTOR \
  */
 .macro zeroentry sym do_sym
 ENTRY(\sym)
-	ASM_CLAC
 	INTR_FRAME
+	ASM_CLAC
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
 	subq $ORIG_RAX-R15, %rsp
@@ -1208,8 +1208,8 @@ END(\sym)
 
 .macro paranoidzeroentry sym do_sym
 ENTRY(\sym)
-	ASM_CLAC
 	INTR_FRAME
+	ASM_CLAC
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
 	subq $ORIG_RAX-R15, %rsp
@@ -1227,8 +1227,8 @@ END(\sym)
 #define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8)
 .macro paranoidzeroentry_ist sym do_sym ist
 ENTRY(\sym)
-	ASM_CLAC
 	INTR_FRAME
+	ASM_CLAC
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
 	subq $ORIG_RAX-R15, %rsp
@@ -1247,8 +1247,8 @@ END(\sym)
 
 .macro errorentry sym do_sym
 ENTRY(\sym)
-	ASM_CLAC
 	XCPT_FRAME
+	ASM_CLAC
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	subq $ORIG_RAX-R15, %rsp
 	CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
@@ -1266,8 +1266,8 @@ END(\sym)
 	/* error code is on the stack already */
 .macro paranoiderrorentry sym do_sym
 ENTRY(\sym)
-	ASM_CLAC
 	XCPT_FRAME
+	ASM_CLAC
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	subq $ORIG_RAX-R15, %rsp
 	CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15

arch/x86/kernel/microcode_amd.c

@@ -8,8 +8,8 @@
  *  Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
  *
  *  Maintainers:
- *  Andreas Herrmann <andreas.herrmann3@amd.com>
- *  Borislav Petkov <borislav.petkov@amd.com>
+ *  Andreas Herrmann <herrmann.der.user@googlemail.com>
+ *  Borislav Petkov <bp@alien8.de>
  *
  *  This driver allows to upgrade microcode on F10h AMD
  *  CPUs and later.
@@ -190,6 +190,7 @@ static unsigned int verify_patch_size(int cpu, u32 patch_size,
 #define F1XH_MPB_MAX_SIZE 2048
 #define F14H_MPB_MAX_SIZE 1824
 #define F15H_MPB_MAX_SIZE 4096
+#define F16H_MPB_MAX_SIZE 3458
 
 	switch (c->x86) {
 	case 0x14:
@@ -198,6 +199,9 @@ static unsigned int verify_patch_size(int cpu, u32 patch_size,
 	case 0x15:
 		max_size = F15H_MPB_MAX_SIZE;
 		break;
+	case 0x16:
+		max_size = F16H_MPB_MAX_SIZE;
+		break;
 	default:
 		max_size = F1XH_MPB_MAX_SIZE;
 		break;

arch/x86/kernel/ptrace.c

@@ -22,6 +22,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/rcupdate.h>
+#include <linux/module.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -166,6 +167,35 @@ static inline bool invalid_selector(u16 value)
 
 #define FLAG_MASK		FLAG_MASK_32
 
+/*
+ * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
+ * when it traps.  The previous stack will be directly underneath the saved
+ * registers, and 'sp/ss' won't even have been saved. Thus the '&regs->sp'.
+ *
+ * Now, if the stack is empty, '&regs->sp' is out of range. In this
+ * case we try to take the previous stack. To always return a non-null
+ * stack pointer we fall back to regs as stack if no previous stack
+ * exists.
+ *
+ * This is valid only for kernel mode traps.
+ */
+unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	unsigned long context = (unsigned long)regs & ~(THREAD_SIZE - 1);
+	unsigned long sp = (unsigned long)&regs->sp;
+	struct thread_info *tinfo;
+
+	if (context == (sp & ~(THREAD_SIZE - 1)))
+		return sp;
+
+	tinfo = (struct thread_info *)context;
+	if (tinfo->previous_esp)
+		return tinfo->previous_esp;
+
+	return (unsigned long)regs;
+}
+EXPORT_SYMBOL_GPL(kernel_stack_pointer);
+
 static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
 {
 	BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0);

arch/x86/mm/tlb.c

@@ -197,7 +197,7 @@ void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
 	}
 
 	if (end == TLB_FLUSH_ALL || tlb_flushall_shift == -1
-					|| vmflag == VM_HUGETLB) {
+					|| vmflag & VM_HUGETLB) {
 		local_flush_tlb();
 		goto flush_all;
 	}

arch/x86/pci/ce4100.c

@@ -115,6 +115,16 @@ static void sata_revid_read(struct sim_dev_reg *reg, u32 *value)
 	reg_read(reg, value);
 }
 
+static void reg_noirq_read(struct sim_dev_reg *reg, u32 *value)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
+	/* force interrupt pin value to 0 */
+	*value = reg->sim_reg.value & 0xfff00ff;
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+}
+
 static struct sim_dev_reg bus1_fixups[] = {
 	DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write)
 	DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write)
@@ -144,6 +154,7 @@ static struct sim_dev_reg bus1_fixups[] = {
 	DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write)
 	DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write)
 	DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 7, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
 	DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
 	DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write)
 	DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write)
@@ -161,8 +172,10 @@ static struct sim_dev_reg bus1_fixups[] = {
 	DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
 	DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write)
 	DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write)
+	DEFINE_REG(16, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
 	DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
 	DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(18, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
 };
 
 static void __init init_sim_regs(void)

arch/x86/platform/ce4100/ce4100.c

@@ -21,12 +21,25 @@
 #include <asm/i8259.h>
 #include <asm/io.h>
 #include <asm/io_apic.h>
+#include <asm/emergency-restart.h>
 
 static int ce4100_i8042_detect(void)
 {
 	return 0;
 }
 
+/*
+ * The CE4100 platform has an internal 8051 Microcontroller which is
+ * responsible for signaling to the external Power Management Unit the
+ * intention to reset, reboot or power off the system. This 8051 device has
+ * its command register mapped at I/O port 0xcf9 and the value 0x4 is used
+ * to power off the system.
+ */
+static void ce4100_power_off(void)
+{
+	outb(0x4, 0xcf9);
+}
+
 #ifdef CONFIG_SERIAL_8250
 
 static unsigned int mem_serial_in(struct uart_port *p, int offset)
@@ -139,8 +152,19 @@ void __init x86_ce4100_early_setup(void)
 	x86_init.mpparse.find_smp_config = x86_init_noop;
 	x86_init.pci.init = ce4100_pci_init;
 
+	/*
+	 * By default, the reboot method is ACPI which is supported by the
+	 * CE4100 bootloader CEFDK using FADT.ResetReg Address and ResetValue
+	 * the bootloader will however issue a system power off instead of
+	 * reboot. By using BOOT_KBD we ensure proper system reboot as
+	 * expected.
+	 */
+	reboot_type = BOOT_KBD;
+
 #ifdef CONFIG_X86_IO_APIC
 	x86_init.pci.init_irq = sdv_pci_init;
 	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck;
 #endif
+
+	pm_power_off = ce4100_power_off;
 }

block/blk-exec.c

@@ -52,11 +52,17 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk,
 			   rq_end_io_fn *done)
 {
 	int where = at_head ? ELEVATOR_INSERT_FRONT : ELEVATOR_INSERT_BACK;
+	bool is_pm_resume;
 
 	WARN_ON(irqs_disabled());
 
 	rq->rq_disk = bd_disk;
 	rq->end_io = done;
+	/*
+	 * need to check this before __blk_run_queue(), because rq can
+	 * be freed before that returns.
+	 */
+	is_pm_resume = rq->cmd_type == REQ_TYPE_PM_RESUME;
 
 	spin_lock_irq(q->queue_lock);
 
@@ -71,7 +77,7 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk,
 	__elv_add_request(q, rq, where);
 	__blk_run_queue(q);
 	/* the queue is stopped so it won't be run */
-	if (rq->cmd_type == REQ_TYPE_PM_RESUME)
+	if (is_pm_resume)
 		q->request_fn(q);
 	spin_unlock_irq(q->queue_lock);
 }

drivers/ata/ahci_platform.c

@@ -238,7 +238,7 @@ static int __devexit ahci_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int ahci_suspend(struct device *dev)
 {
 	struct ahci_platform_data *pdata = dev_get_platdata(dev);

drivers/ata/libata-acpi.c

@@ -1105,10 +1105,15 @@ static int ata_acpi_bind_device(struct ata_port *ap, struct scsi_device *sdev,
 	struct acpi_device *acpi_dev;
 	struct acpi_device_power_state *states;
 
-	if (ap->flags & ATA_FLAG_ACPI_SATA)
-		ata_dev = &ap->link.device[sdev->channel];
-	else
+	if (ap->flags & ATA_FLAG_ACPI_SATA) {
+		if (!sata_pmp_attached(ap))
+			ata_dev = &ap->link.device[sdev->id];
+		else
+			ata_dev = &ap->pmp_link[sdev->channel].device[sdev->id];
+	}
+	else {
 		ata_dev = &ap->link.device[sdev->id];
+	}
 
 	*handle = ata_dev_acpi_handle(ata_dev);
 

drivers/ata/libata-core.c

@@ -2942,6 +2942,10 @@ const struct ata_timing *ata_timing_find_mode(u8 xfer_mode)
 
 	if (xfer_mode == t->mode)
 		return t;
+
+	WARN_ONCE(true, "%s: unable to find timing for xfer_mode 0x%x\n",
+			__func__, xfer_mode);
+
 	return NULL;
 }
 

drivers/ata/libata-scsi.c

@@ -1052,6 +1052,8 @@ static void ata_scsi_sdev_config(struct scsi_device *sdev)
 {
 	sdev->use_10_for_rw = 1;
 	sdev->use_10_for_ms = 1;
+	sdev->no_report_opcodes = 1;
+	sdev->no_write_same = 1;
 
 	/* Schedule policy is determined by ->qc_defer() callback and
 	 * it needs to see every deferred qc.  Set dev_blocked to 1 to

drivers/ata/pata_arasan_cf.c

@@ -317,6 +317,12 @@ static int cf_init(struct arasan_cf_dev *acdev)
 		return ret;
 	}
 
+	ret = clk_set_rate(acdev->clk, 166000000);
+	if (ret) {
+		dev_warn(acdev->host->dev, "clock set rate failed");
+		return ret;
+	}
+
 	spin_lock_irqsave(&acdev->host->lock, flags);
 	/* configure CF interface clock */
 	writel((pdata->cf_if_clk <= CF_IF_CLK_200M) ? pdata->cf_if_clk :
@@ -908,7 +914,7 @@ static int __devexit arasan_cf_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int arasan_cf_suspend(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);

drivers/ata/sata_highbank.c

@@ -260,7 +260,7 @@ static const struct of_device_id ahci_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);
 
-static int __init ahci_highbank_probe(struct platform_device *pdev)
+static int __devinit ahci_highbank_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ahci_host_priv *hpriv;
@@ -378,7 +378,7 @@ static int __devexit ahci_highbank_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int ahci_highbank_suspend(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);

drivers/ata/sata_svw.c

@@ -142,6 +142,39 @@ static int k2_sata_scr_write(struct ata_link *link,
 	return 0;
 }
 
+static int k2_sata_softreset(struct ata_link *link,
+			     unsigned int *class, unsigned long deadline)
+{
+	u8 dmactl;
+	void __iomem *mmio = link->ap->ioaddr.bmdma_addr;
+
+	dmactl = readb(mmio + ATA_DMA_CMD);
+
+	/* Clear the start bit */
+	if (dmactl & ATA_DMA_START) {
+		dmactl &= ~ATA_DMA_START;
+		writeb(dmactl, mmio + ATA_DMA_CMD);
+	}
+
+	return ata_sff_softreset(link, class, deadline);
+}
+
+static int k2_sata_hardreset(struct ata_link *link,
+			     unsigned int *class, unsigned long deadline)
+{
+	u8 dmactl;
+	void __iomem *mmio = link->ap->ioaddr.bmdma_addr;
+
+	dmactl = readb(mmio + ATA_DMA_CMD);
+
+	/* Clear the start bit */
+	if (dmactl & ATA_DMA_START) {
+		dmactl &= ~ATA_DMA_START;
+		writeb(dmactl, mmio + ATA_DMA_CMD);
+	}
+
+	return sata_sff_hardreset(link, class, deadline);
+}
 
 static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 {
@@ -346,6 +379,8 @@ static struct scsi_host_template k2_sata_sht = {
 
 static struct ata_port_operations k2_sata_ops = {
 	.inherits		= &ata_bmdma_port_ops,
+	.softreset              = k2_sata_softreset,
+	.hardreset              = k2_sata_hardreset,
 	.sff_tf_load		= k2_sata_tf_load,
 	.sff_tf_read		= k2_sata_tf_read,
 	.sff_check_status	= k2_stat_check_status,

drivers/base/power/qos.c

@@ -451,7 +451,7 @@ int dev_pm_qos_add_ancestor_request(struct device *dev,
 	if (ancestor)
 		error = dev_pm_qos_add_request(ancestor, req, value);
 
-	if (error)
+	if (error < 0)
 		req->dev = NULL;
 
 	return error;

drivers/base/regmap/internal.h

@@ -120,6 +120,8 @@ int _regmap_write(struct regmap *map, unsigned int reg,
 
 struct regmap_range_node {
 	struct rb_node node;
+	const char *name;
+	struct regmap *map;
 
 	unsigned int range_min;
 	unsigned int range_max;

drivers/base/regmap/regmap-debugfs.c

@@ -56,15 +56,15 @@ static const struct file_operations regmap_name_fops = {
 	.llseek = default_llseek,
 };
 
-static ssize_t regmap_map_read_file(struct file *file, char __user *user_buf,
-				    size_t count, loff_t *ppos)
+static ssize_t regmap_read_debugfs(struct regmap *map, unsigned int from,
+				   unsigned int to, char __user *user_buf,
+				   size_t count, loff_t *ppos)
 {
 	int reg_len, val_len, tot_len;
 	size_t buf_pos = 0;
 	loff_t p = 0;
 	ssize_t ret;
 	int i;
-	struct regmap *map = file->private_data;
 	char *buf;
 	unsigned int val;
 
@@ -80,7 +80,7 @@ static ssize_t regmap_map_read_file(struct file *file, char __user *user_buf,
 	val_len = 2 * map->format.val_bytes;
 	tot_len = reg_len + val_len + 3;      /* : \n */
 
-	for (i = 0; i <= map->max_register; i += map->reg_stride) {
+	for (i = from; i <= to; i += map->reg_stride) {
 		if (!regmap_readable(map, i))
 			continue;
 
@@ -95,7 +95,7 @@ static ssize_t regmap_map_read_file(struct file *file, char __user *user_buf,
 
 			/* Format the register */
 			snprintf(buf + buf_pos, count - buf_pos, "%.*x: ",
-				 reg_len, i);
+				 reg_len, i - from);
 			buf_pos += reg_len + 2;
 
 			/* Format the value, write all X if we can't read */
@@ -126,6 +126,15 @@ out:
 	return ret;
 }
 
+static ssize_t regmap_map_read_file(struct file *file, char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	struct regmap *map = file->private_data;
+
+	return regmap_read_debugfs(map, 0, map->max_register, user_buf,
+				   count, ppos);
+}
+
 #undef REGMAP_ALLOW_WRITE_DEBUGFS
 #ifdef REGMAP_ALLOW_WRITE_DEBUGFS
 /*
@@ -174,6 +183,22 @@ static const struct file_operations regmap_map_fops = {
 	.llseek = default_llseek,
 };
 
+static ssize_t regmap_range_read_file(struct file *file, char __user *user_buf,
+				      size_t count, loff_t *ppos)
+{
+	struct regmap_range_node *range = file->private_data;
+	struct regmap *map = range->map;
+
+	return regmap_read_debugfs(map, range->range_min, range->range_max,
+				   user_buf, count, ppos);
+}
+
+static const struct file_operations regmap_range_fops = {
+	.open = simple_open,
+	.read = regmap_range_read_file,
+	.llseek = default_llseek,
+};
+
 static ssize_t regmap_access_read_file(struct file *file,
 				       char __user *user_buf, size_t count,
 				       loff_t *ppos)
@@ -244,6 +269,9 @@ static const struct file_operations regmap_access_fops = {
 
 void regmap_debugfs_init(struct regmap *map, const char *name)
 {
+	struct rb_node *next;
+	struct regmap_range_node *range_node;
+
 	if (name) {
 		map->debugfs_name = kasprintf(GFP_KERNEL, "%s-%s",
 					      dev_name(map->dev), name);
@@ -276,6 +304,18 @@ void regmap_debugfs_init(struct regmap *map, const char *name)
 		debugfs_create_bool("cache_bypass", 0400, map->debugfs,
 				    &map->cache_bypass);
 	}
+
+	next = rb_first(&map->range_tree);
+	while (next) {
+		range_node = rb_entry(next, struct regmap_range_node, node);
+
+		if (range_node->name)
+			debugfs_create_file(range_node->name, 0400,
+					    map->debugfs, range_node,
+					    &regmap_range_fops);
+
+		next = rb_next(&range_node->node);
+	}
 }
 
 void regmap_debugfs_exit(struct regmap *map)

drivers/base/regmap/regmap.c

@@ -519,20 +519,38 @@ struct regmap *regmap_init(struct device *dev,
 	}
 
 	map->range_tree = RB_ROOT;
-	for (i = 0; i < config->n_ranges; i++) {
+	for (i = 0; i < config->num_ranges; i++) {
 		const struct regmap_range_cfg *range_cfg = &config->ranges[i];
 		struct regmap_range_node *new;
 
 		/* Sanity check */
-		if (range_cfg->range_max < range_cfg->range_min ||
-		    range_cfg->range_max > map->max_register ||
-		    range_cfg->selector_reg > map->max_register ||
-		    range_cfg->window_len == 0)
+		if (range_cfg->range_max < range_cfg->range_min) {
+			dev_err(map->dev, "Invalid range %d: %d < %d\n", i,
+				range_cfg->range_max, range_cfg->range_min);
 			goto err_range;
+		}
+
+		if (range_cfg->range_max > map->max_register) {
+			dev_err(map->dev, "Invalid range %d: %d > %d\n", i,
+				range_cfg->range_max, map->max_register);
+			goto err_range;
+		}
+
+		if (range_cfg->selector_reg > map->max_register) {
+			dev_err(map->dev,
+				"Invalid range %d: selector out of map\n", i);
+			goto err_range;
+		}
+
+		if (range_cfg->window_len == 0) {
+			dev_err(map->dev, "Invalid range %d: window_len 0\n",
+				i);
+			goto err_range;
+		}
 
 		/* Make sure, that this register range has no selector
 		   or data window within its boundary */
-		for (j = 0; j < config->n_ranges; j++) {
+		for (j = 0; j < config->num_ranges; j++) {
 			unsigned sel_reg = config->ranges[j].selector_reg;
 			unsigned win_min = config->ranges[j].window_start;
 			unsigned win_max = win_min +
@@ -540,11 +558,17 @@ struct regmap *regmap_init(struct device *dev,
 
 			if (range_cfg->range_min <= sel_reg &&
 			    sel_reg <= range_cfg->range_max) {
+				dev_err(map->dev,
+					"Range %d: selector for %d in window\n",
+					i, j);
 				goto err_range;
 			}
 
 			if (!(win_max < range_cfg->range_min ||
 			      win_min > range_cfg->range_max)) {
+				dev_err(map->dev,
+					"Range %d: window for %d in window\n",
+					i, j);
 				goto err_range;
 			}
 		}
@@ -555,6 +579,8 @@ struct regmap *regmap_init(struct device *dev,
 			goto err_range;
 		}
 
+		new->map = map;
+		new->name = range_cfg->name;
 		new->range_min = range_cfg->range_min;
 		new->range_max = range_cfg->range_max;
 		new->selector_reg = range_cfg->selector_reg;
@@ -564,6 +590,7 @@ struct regmap *regmap_init(struct device *dev,
 		new->window_len = range_cfg->window_len;
 
 		if (_regmap_range_add(map, new) == false) {
+			dev_err(map->dev, "Failed to add range %d\n", i);
 			kfree(new);
 			goto err_range;
 		}
@@ -579,7 +606,7 @@ struct regmap *regmap_init(struct device *dev,
 	}
 
 	ret = regcache_init(map, config);
-	if (ret < 0)
+	if (ret != 0)
 		goto err_range;
 
 	regmap_debugfs_init(map, config->name);
@@ -738,59 +765,57 @@ struct regmap *dev_get_regmap(struct device *dev, const char *name)
 EXPORT_SYMBOL_GPL(dev_get_regmap);
 
 static int _regmap_select_page(struct regmap *map, unsigned int *reg,
+			       struct regmap_range_node *range,
 			       unsigned int val_num)
 {
-	struct regmap_range_node *range;
 	void *orig_work_buf;
 	unsigned int win_offset;
 	unsigned int win_page;
 	bool page_chg;
 	int ret;
 
-	range = _regmap_range_lookup(map, *reg);
-	if (range) {
-		win_offset = (*reg - range->range_min) % range->window_len;
-		win_page = (*reg - range->range_min) / range->window_len;
-
-		if (val_num > 1) {
-			/* Bulk write shouldn't cross range boundary */
-			if (*reg + val_num - 1 > range->range_max)
-				return -EINVAL;
+	win_offset = (*reg - range->range_min) % range->window_len;
+	win_page = (*reg - range->range_min) / range->window_len;
 
-			/* ... or single page boundary */
-			if (val_num > range->window_len - win_offset)
-				return -EINVAL;
-		}
+	if (val_num > 1) {
+		/* Bulk write shouldn't cross range boundary */
+		if (*reg + val_num - 1 > range->range_max)
+			return -EINVAL;
 
-		/* It is possible to have selector register inside data window.
-		   In that case, selector register is located on every page and
-		   it needs no page switching, when accessed alone. */
-		if (val_num > 1 ||
-		    range->window_start + win_offset != range->selector_reg) {
-			/* Use separate work_buf during page switching */
-			orig_work_buf = map->work_buf;
-			map->work_buf = map->selector_work_buf;
+		/* ... or single page boundary */
+		if (val_num > range->window_len - win_offset)
+			return -EINVAL;
+	}
 
-			ret = _regmap_update_bits(map, range->selector_reg,
-					range->selector_mask,
-					win_page << range->selector_shift,
-					&page_chg);
+	/* It is possible to have selector register inside data window.
+	   In that case, selector register is located on every page and
+	   it needs no page switching, when accessed alone. */
+	if (val_num > 1 ||
+	    range->window_start + win_offset != range->selector_reg) {
+		/* Use separate work_buf during page switching */
+		orig_work_buf = map->work_buf;
+		map->work_buf = map->selector_work_buf;
 
-			map->work_buf = orig_work_buf;
+		ret = _regmap_update_bits(map, range->selector_reg,
+					  range->selector_mask,
+					  win_page << range->selector_shift,
+					  &page_chg);
 
-			if (ret < 0)
-				return ret;
-		}
+		map->work_buf = orig_work_buf;
 
-		*reg = range->window_start + win_offset;
+		if (ret != 0)
+			return ret;
 	}
 
+	*reg = range->window_start + win_offset;
+
 	return 0;
 }
 
 static int _regmap_raw_write(struct regmap *map, unsigned int reg,
 			     const void *val, size_t val_len)
 {
+	struct regmap_range_node *range;
 	u8 *u8 = map->work_buf;
 	void *buf;
 	int ret = -ENOTSUPP;
@@ -825,9 +850,35 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg,
 		}
 	}
 
-	ret = _regmap_select_page(map, &reg, val_len / map->format.val_bytes);
-	if (ret < 0)
-		return ret;
+	range = _regmap_range_lookup(map, reg);
+	if (range) {
+		int val_num = val_len / map->format.val_bytes;
+		int win_offset = (reg - range->range_min) % range->window_len;
+		int win_residue = range->window_len - win_offset;
+
+		/* If the write goes beyond the end of the window split it */
+		while (val_num > win_residue) {
+			dev_dbg(map->dev, "Writing window %d/%d\n",
+				win_residue, val_len / map->format.val_bytes);
+			ret = _regmap_raw_write(map, reg, val, win_residue *
+						map->format.val_bytes);
+			if (ret != 0)
+				return ret;
+
+			reg += win_residue;
+			val_num -= win_residue;
+			val += win_residue * map->format.val_bytes;
+			val_len -= win_residue * map->format.val_bytes;
+
+			win_offset = (reg - range->range_min) %
+				range->window_len;
+			win_residue = range->window_len - win_offset;
+		}
+
+		ret = _regmap_select_page(map, &reg, range, val_num);
+		if (ret != 0)
+			return ret;
+	}
 
 	map->format.format_reg(map->work_buf, reg, map->reg_shift);
 
@@ -876,6 +927,7 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg,
 int _regmap_write(struct regmap *map, unsigned int reg,
 		  unsigned int val)
 {
+	struct regmap_range_node *range;
 	int ret;
 	BUG_ON(!map->format.format_write && !map->format.format_val);
 
@@ -897,9 +949,12 @@ int _regmap_write(struct regmap *map, unsigned int reg,
 	trace_regmap_reg_write(map->dev, reg, val);
 
 	if (map->format.format_write) {
-		ret = _regmap_select_page(map, &reg, 1);
-		if (ret < 0)
-			return ret;
+		range = _regmap_range_lookup(map, reg);
+		if (range) {
+			ret = _regmap_select_page(map, &reg, range, 1);
+			if (ret != 0)
+				return ret;
+		}
 
 		map->format.format_write(map, reg, val);
 
@@ -1055,12 +1110,17 @@ EXPORT_SYMBOL_GPL(regmap_bulk_write);
 static int _regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
 			    unsigned int val_len)
 {
+	struct regmap_range_node *range;
 	u8 *u8 = map->work_buf;
 	int ret;
 
-	ret = _regmap_select_page(map, &reg, val_len / map->format.val_bytes);
-	if (ret < 0)
-		return ret;
+	range = _regmap_range_lookup(map, reg);
+	if (range) {
+		ret = _regmap_select_page(map, &reg, range,
+					  val_len / map->format.val_bytes);
+		if (ret != 0)
+			return ret;
+	}
 
 	map->format.format_reg(map->work_buf, reg, map->reg_shift);
 

drivers/block/aoe/aoecmd.c

@@ -935,7 +935,7 @@ aoe_end_request(struct aoedev *d, struct request *rq, int fastfail)
 
 	/* cf. http://lkml.org/lkml/2006/10/31/28 */
 	if (!fastfail)
-		q->request_fn(q);
+		__blk_run_queue(q);
 }
 
 static void

drivers/block/floppy.c

@@ -4330,6 +4330,7 @@ out_unreg_region:
 out_unreg_blkdev:
 	unregister_blkdev(FLOPPY_MAJOR, "fd");
 out_put_disk:
+	destroy_workqueue(floppy_wq);
 	for (drive = 0; drive < N_DRIVE; drive++) {
 		if (!disks[drive])
 			break;
@@ -4340,7 +4341,6 @@ out_put_disk:
 		}
 		put_disk(disks[drive]);
 	}
-	destroy_workqueue(floppy_wq);
 	return err;
 }
 
@@ -4555,6 +4555,8 @@ static void __exit floppy_module_exit(void)
 	unregister_blkdev(FLOPPY_MAJOR, "fd");
 	platform_driver_unregister(&floppy_driver);
 
+	destroy_workqueue(floppy_wq);
+
 	for (drive = 0; drive < N_DRIVE; drive++) {
 		del_timer_sync(&motor_off_timer[drive]);
 
@@ -4578,7 +4580,6 @@ static void __exit floppy_module_exit(void)
 
 	cancel_delayed_work_sync(&fd_timeout);
 	cancel_delayed_work_sync(&fd_timer);
-	destroy_workqueue(floppy_wq);
 
 	if (atomic_read(&usage_count))
 		floppy_release_irq_and_dma();

drivers/block/mtip32xx/mtip32xx.c

@@ -559,7 +559,7 @@ static void mtip_timeout_function(unsigned long int data)
 	struct mtip_cmd *command;
 	int tag, cmdto_cnt = 0;
 	unsigned int bit, group;
-	unsigned int num_command_slots = port->dd->slot_groups * 32;
+	unsigned int num_command_slots;
 	unsigned long to, tagaccum[SLOTBITS_IN_LONGS];
 
 	if (unlikely(!port))
@@ -572,6 +572,7 @@ static void mtip_timeout_function(unsigned long int data)
 	}
 	/* clear the tag accumulator */
 	memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
+	num_command_slots = port->dd->slot_groups * 32;
 
 	for (tag = 0; tag < num_command_slots; tag++) {
 		/*
@@ -2218,8 +2219,8 @@ static int exec_drive_taskfile(struct driver_data *dd,
 		fis.device);
 
 	/* check for erase mode support during secure erase.*/
-	if ((fis.command == ATA_CMD_SEC_ERASE_UNIT)
-					&& (outbuf[0] & MTIP_SEC_ERASE_MODE)) {
+	if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) && outbuf &&
+					(outbuf[0] & MTIP_SEC_ERASE_MODE)) {
 		erasemode = 1;
 	}
 
@@ -2439,7 +2440,7 @@ static int mtip_hw_ioctl(struct driver_data *dd, unsigned int cmd,
  * return value
  *	None
  */
-static void mtip_hw_submit_io(struct driver_data *dd, sector_t start,
+static void mtip_hw_submit_io(struct driver_data *dd, sector_t sector,
 			      int nsect, int nents, int tag, void *callback,
 			      void *data, int dir)
 {
@@ -2447,6 +2448,7 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start,
 	struct mtip_port *port = dd->port;
 	struct mtip_cmd *command = &port->commands[tag];
 	int dma_dir = (dir == READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+	u64 start = sector;
 
 	/* Map the scatter list for DMA access */
 	nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir);
@@ -2465,8 +2467,12 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start,
 	fis->opts        = 1 << 7;
 	fis->command     =
 		(dir == READ ? ATA_CMD_FPDMA_READ : ATA_CMD_FPDMA_WRITE);
-	*((unsigned int *) &fis->lba_low) = (start & 0xFFFFFF);
-	*((unsigned int *) &fis->lba_low_ex) = ((start >> 24) & 0xFFFFFF);
+	fis->lba_low     = start & 0xFF;
+	fis->lba_mid     = (start >> 8) & 0xFF;
+	fis->lba_hi      = (start >> 16) & 0xFF;
+	fis->lba_low_ex  = (start >> 24) & 0xFF;
+	fis->lba_mid_ex  = (start >> 32) & 0xFF;
+	fis->lba_hi_ex   = (start >> 40) & 0xFF;
 	fis->device	 = 1 << 6;
 	fis->features    = nsect & 0xFF;
 	fis->features_ex = (nsect >> 8) & 0xFF;

drivers/block/mtip32xx/mtip32xx.h

@@ -34,7 +34,7 @@
 #define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET	0x48
 
 /* check for erase mode support during secure erase */
-#define MTIP_SEC_ERASE_MODE     0x3
+#define MTIP_SEC_ERASE_MODE     0x2
 
 /* # of times to retry timed out/failed IOs */
 #define MTIP_MAX_RETRIES	2
@@ -155,14 +155,14 @@ enum {
 	MTIP_DDF_REBUILD_FAILED_BIT = 8,
 };
 
-__packed struct smart_attr{
+struct smart_attr {
 	u8 attr_id;
 	u16 flags;
 	u8 cur;
 	u8 worst;
 	u32 data;
 	u8 res[3];
-};
+} __packed;
 
 /* Register Frame Information Structure (FIS), host to device. */
 struct host_to_dev_fis {

drivers/edac/amd64_edac.h

@@ -33,7 +33,7 @@
  *		detection. The mods to Rev F required more family
  *		information detection.
  *
- *	Changes/Fixes by Borislav Petkov <borislav.petkov@amd.com>:
+ *	Changes/Fixes by Borislav Petkov <bp@alien8.de>:
  *		- misc fixes and code cleanups
  *
  * This module is based on the following documents

drivers/edac/edac_stub.c

@@ -5,7 +5,7 @@
  *
  * 2007 (c) MontaVista Software, Inc.
  * 2010 (c) Advanced Micro Devices Inc.
- *	    Borislav Petkov <borislav.petkov@amd.com>
+ *	    Borislav Petkov <bp@alien8.de>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any

drivers/edac/mce_amd_inj.c

@@ -6,7 +6,7 @@
  * This file may be distributed under the terms of the GNU General Public
  * License version 2.
  *
- * Copyright (c) 2010:  Borislav Petkov <borislav.petkov@amd.com>
+ * Copyright (c) 2010:  Borislav Petkov <bp@alien8.de>
  *			Advanced Micro Devices Inc.
  */
 
@@ -168,6 +168,6 @@ module_init(edac_init_mce_inject);
 module_exit(edac_exit_mce_inject);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Borislav Petkov <borislav.petkov@amd.com>");
+MODULE_AUTHOR("Borislav Petkov <bp@alien8.de>");
 MODULE_AUTHOR("AMD Inc.");
 MODULE_DESCRIPTION("MCE injection facility for testing MCE decoding");

drivers/firewire/sbp2.c

@@ -1546,6 +1546,8 @@ static int sbp2_scsi_slave_configure(struct scsi_device *sdev)
 	struct sbp2_logical_unit *lu = sdev->hostdata;
 
 	sdev->use_10_for_rw = 1;
+	sdev->no_report_opcodes = 1;
+	sdev->no_write_same = 1;
 
 	if (sbp2_param_exclusive_login)
 		sdev->manage_start_stop = 1;

drivers/gpio/Kconfig

@@ -466,7 +466,7 @@ config GPIO_ADP5588_IRQ
 
 config GPIO_ADNP
 	tristate "Avionic Design N-bit GPIO expander"
-	depends on I2C && OF
+	depends on I2C && OF_GPIO
 	help
 	  This option enables support for N GPIOs found on Avionic Design
 	  I2C GPIO expanders. The register space will be extended by powers

drivers/gpio/gpio-mcp23s08.c

@@ -77,7 +77,7 @@ struct mcp23s08_driver_data {
 
 /*----------------------------------------------------------------------*/
 
-#ifdef CONFIG_I2C
+#if IS_ENABLED(CONFIG_I2C)
 
 static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg)
 {
@@ -399,7 +399,7 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 		break;
 #endif /* CONFIG_SPI_MASTER */
 
-#ifdef CONFIG_I2C
+#if IS_ENABLED(CONFIG_I2C)
 	case MCP_TYPE_008:
 		mcp->ops = &mcp23008_ops;
 		mcp->chip.ngpio = 8;
@@ -473,7 +473,7 @@ fail:
 
 /*----------------------------------------------------------------------*/
 
-#ifdef CONFIG_I2C
+#if IS_ENABLED(CONFIG_I2C)
 
 static int __devinit mcp230xx_probe(struct i2c_client *client,
 				    const struct i2c_device_id *id)

drivers/gpio/gpio-mvebu.c

@@ -92,6 +92,11 @@ static inline void __iomem *mvebu_gpioreg_out(struct mvebu_gpio_chip *mvchip)
 	return mvchip->membase + GPIO_OUT_OFF;
 }
 
+static inline void __iomem *mvebu_gpioreg_blink(struct mvebu_gpio_chip *mvchip)
+{
+	return mvchip->membase + GPIO_BLINK_EN_OFF;
+}
+
 static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip)
 {
 	return mvchip->membase + GPIO_IO_CONF_OFF;
@@ -206,6 +211,23 @@ static int mvebu_gpio_get(struct gpio_chip *chip, unsigned pin)
 	return (u >> pin) & 1;
 }
 
+static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value)
+{
+	struct mvebu_gpio_chip *mvchip =
+		container_of(chip, struct mvebu_gpio_chip, chip);
+	unsigned long flags;
+	u32 u;
+
+	spin_lock_irqsave(&mvchip->lock, flags);
+	u = readl_relaxed(mvebu_gpioreg_blink(mvchip));
+	if (value)
+		u |= 1 << pin;
+	else
+		u &= ~(1 << pin);
+	writel_relaxed(u, mvebu_gpioreg_blink(mvchip));
+	spin_unlock_irqrestore(&mvchip->lock, flags);
+}
+
 static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
 {
 	struct mvebu_gpio_chip *mvchip =
@@ -244,6 +266,7 @@ static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned pin,
 	if (ret)
 		return ret;
 
+	mvebu_gpio_blink(chip, pin, 0);
 	mvebu_gpio_set(chip, pin, value);
 
 	spin_lock_irqsave(&mvchip->lock, flags);

drivers/gpu/drm/nouveau/core/engine/disp/nv50.c

@@ -49,13 +49,7 @@ nv50_disp_intr_vblank(struct nv50_disp_priv *priv, int crtc)
 		if (chan->vblank.crtc != crtc)
 			continue;
 
-		if (nv_device(priv)->chipset == 0x50) {
-			nv_wr32(priv, 0x001704, chan->vblank.channel);
-			nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma);
-			bar->flush(bar);
-			nv_wr32(priv, 0x001570, chan->vblank.offset);
-			nv_wr32(priv, 0x001574, chan->vblank.value);
-		} else {
+		if (nv_device(priv)->chipset >= 0xc0) {
 			nv_wr32(priv, 0x001718, 0x80000000 | chan->vblank.channel);
 			bar->flush(bar);
 			nv_wr32(priv, 0x06000c,
@@ -63,6 +57,17 @@ nv50_disp_intr_vblank(struct nv50_disp_priv *priv, int crtc)
 			nv_wr32(priv, 0x060010,
 				lower_32_bits(chan->vblank.offset));
 			nv_wr32(priv, 0x060014, chan->vblank.value);
+		} else {
+			nv_wr32(priv, 0x001704, chan->vblank.channel);
+			nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma);
+			bar->flush(bar);
+			if (nv_device(priv)->chipset == 0x50) {
+				nv_wr32(priv, 0x001570, chan->vblank.offset);
+				nv_wr32(priv, 0x001574, chan->vblank.value);
+			} else {
+				nv_wr32(priv, 0x060010, chan->vblank.offset);
+				nv_wr32(priv, 0x060014, chan->vblank.value);
+			}
 		}
 
 		list_del(&chan->vblank.head);

drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c

@@ -669,21 +669,27 @@ nv40_grctx_fill(struct nouveau_device *device, struct nouveau_gpuobj *mem)
 			   });
 }
 
-void
+int
 nv40_grctx_init(struct nouveau_device *device, u32 *size)
 {
-	u32 ctxprog[256], i;
+	u32 *ctxprog = kmalloc(256 * 4, GFP_KERNEL), i;
 	struct nouveau_grctx ctx = {
 		.device = device,
 		.mode = NOUVEAU_GRCTX_PROG,
 		.data = ctxprog,
-		.ctxprog_max = ARRAY_SIZE(ctxprog)
+		.ctxprog_max = 256,
 	};
 
+	if (!ctxprog)
+		return -ENOMEM;
+
 	nv40_grctx_generate(&ctx);
 
 	nv_wr32(device, 0x400324, 0);
 	for (i = 0; i < ctx.ctxprog_len; i++)
 		nv_wr32(device, 0x400328, ctxprog[i]);
 	*size = ctx.ctxvals_pos * 4;
+
+	kfree(ctxprog);
+	return 0;
 }

drivers/gpu/drm/nouveau/core/engine/graph/nv40.c

@@ -346,7 +346,9 @@ nv40_graph_init(struct nouveau_object *object)
 		return ret;
 
 	/* generate and upload context program */
-	nv40_grctx_init(nv_device(priv), &priv->size);
+	ret = nv40_grctx_init(nv_device(priv), &priv->size);
+	if (ret)
+		return ret;
 
 	/* No context present currently */
 	nv_wr32(priv, NV40_PGRAPH_CTXCTL_CUR, 0x00000000);

drivers/gpu/drm/nouveau/core/engine/graph/nv40.h

@@ -15,7 +15,7 @@ nv44_graph_class(void *priv)
 	return !(0x0baf & (1 << (device->chipset & 0x0f)));
 }
 
-void nv40_grctx_init(struct nouveau_device *, u32 *size);
+int  nv40_grctx_init(struct nouveau_device *, u32 *size);
 void nv40_grctx_fill(struct nouveau_device *, struct nouveau_gpuobj *);
 
 #endif

drivers/gpu/drm/nouveau/core/include/core/object.h

@@ -175,14 +175,18 @@ nv_mo32(void *obj, u32 addr, u32 mask, u32 data)
 	return temp;
 }
 
-static inline bool
-nv_strncmp(void *obj, u32 addr, u32 len, const char *str)
+static inline int
+nv_memcmp(void *obj, u32 addr, const char *str, u32 len)
 {
+	unsigned char c1, c2;
+
 	while (len--) {
-		if (nv_ro08(obj, addr++) != *(str++))
-			return false;
+		c1 = nv_ro08(obj, addr++);
+		c2 = *(str++);
+		if (c1 != c2)
+			return c1 - c2;
 	}
-	return true;
+	return 0;
 }
 
 #endif

drivers/gpu/drm/nouveau/core/include/subdev/clock.h

@@ -54,6 +54,7 @@ int nv04_clock_pll_calc(struct nouveau_clock *, struct nvbios_pll *,
 			int clk, struct nouveau_pll_vals *);
 int nv04_clock_pll_prog(struct nouveau_clock *, u32 reg1,
 			struct nouveau_pll_vals *);
-
+int nva3_clock_pll_calc(struct nouveau_clock *, struct nvbios_pll *,
+			int clk, struct nouveau_pll_vals *);
 
 #endif

drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c

@@ -64,7 +64,7 @@ dcb_table(struct nouveau_bios *bios, u8 *ver, u8 *hdr, u8 *cnt, u8 *len)
 		}
 	} else
 	if (*ver >= 0x15) {
-		if (!nv_strncmp(bios, dcb - 7, 7, "DEV_REC")) {
+		if (!nv_memcmp(bios, dcb - 7, "DEV_REC", 7)) {
 			u16 i2c = nv_ro16(bios, dcb + 2);
 			*hdr = 4;
 			*cnt = (i2c - dcb) / 10;

drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c

@@ -66,6 +66,24 @@ nva3_clock_pll_set(struct nouveau_clock *clk, u32 type, u32 freq)
 	return ret;
 }
 
+int
+nva3_clock_pll_calc(struct nouveau_clock *clock, struct nvbios_pll *info,
+		    int clk, struct nouveau_pll_vals *pv)
+{
+	int ret, N, M, P;
+
+	ret = nva3_pll_calc(clock, info, clk, &N, NULL, &M, &P);
+
+	if (ret > 0) {
+		pv->refclk = info->refclk;
+		pv->N1 = N;
+		pv->M1 = M;
+		pv->log2P = P;
+	}
+	return ret;
+}
+
+
 static int
 nva3_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine,
 		struct nouveau_oclass *oclass, void *data, u32 size,
@@ -80,6 +98,7 @@ nva3_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine,
 		return ret;
 
 	priv->base.pll_set = nva3_clock_pll_set;
+	priv->base.pll_calc = nva3_clock_pll_calc;
 	return 0;
 }
 

drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c

@@ -79,6 +79,7 @@ nvc0_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine,
 		return ret;
 
 	priv->base.pll_set = nvc0_clock_pll_set;
+	priv->base.pll_calc = nva3_clock_pll_calc;
 	return 0;
 }
 

drivers/gpu/drm/nouveau/nouveau_abi16.c

@@ -241,6 +241,10 @@ nouveau_abi16_ioctl_channel_alloc(ABI16_IOCTL_ARGS)
 
 	if (unlikely(!abi16))
 		return -ENOMEM;
+
+	if (!drm->channel)
+		return nouveau_abi16_put(abi16, -ENODEV);
+
 	client = nv_client(abi16->client);
 
 	if (init->fb_ctxdma_handle == ~0 || init->tt_ctxdma_handle == ~0)

drivers/gpu/drm/nouveau/nouveau_drm.c

@@ -129,7 +129,8 @@ nouveau_accel_init(struct nouveau_drm *drm)
 
 	/* initialise synchronisation routines */
 	if      (device->card_type < NV_10) ret = nv04_fence_create(drm);
-	else if (device->chipset   <  0x84) ret = nv10_fence_create(drm);
+	else if (device->card_type < NV_50) ret = nv10_fence_create(drm);
+	else if (device->chipset   <  0x84) ret = nv50_fence_create(drm);
 	else if (device->card_type < NV_C0) ret = nv84_fence_create(drm);
 	else                                ret = nvc0_fence_create(drm);
 	if (ret) {

drivers/gpu/drm/radeon/evergreen.c

@@ -1330,6 +1330,8 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav
 					break;
 				udelay(1);
 			}
+		} else {
+			save->crtc_enabled[i] = false;
 		}
 	}
 

drivers/gpu/drm/radeon/radeon_agp.c

@@ -69,9 +69,12 @@ static struct radeon_agpmode_quirk radeon_agpmode_quirk_list[] = {
 	/* Intel 82830 830 Chipset Host Bridge / Mobility M6 LY Needs AGPMode 2 (fdo #17360)*/
 	{ PCI_VENDOR_ID_INTEL, 0x3575, PCI_VENDOR_ID_ATI, 0x4c59,
 		PCI_VENDOR_ID_DELL, 0x00e3, 2},
-	/* Intel 82852/82855 host bridge / Mobility FireGL 9000 R250 Needs AGPMode 1 (lp #296617) */
+	/* Intel 82852/82855 host bridge / Mobility FireGL 9000 RV250 Needs AGPMode 1 (lp #296617) */
 	{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4c66,
 		PCI_VENDOR_ID_DELL, 0x0149, 1},
+	/* Intel 82855PM host bridge / Mobility FireGL 9000 RV250 Needs AGPMode 1 for suspend/resume */
+	{ PCI_VENDOR_ID_INTEL, 0x3340, PCI_VENDOR_ID_ATI, 0x4c66,
+		PCI_VENDOR_ID_IBM, 0x0531, 1},
 	/* Intel 82852/82855 host bridge / Mobility 9600 M10 RV350 Needs AGPMode 1 (deb #467460) */
 	{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4e50,
 		0x1025, 0x0061, 1},

drivers/i2c/busses/i2c-at91.c

@@ -39,6 +39,7 @@
 #define	AT91_TWI_STOP		0x0002	/* Send a Stop Condition */
 #define	AT91_TWI_MSEN		0x0004	/* Master Transfer Enable */
 #define	AT91_TWI_SVDIS		0x0020	/* Slave Transfer Disable */
+#define	AT91_TWI_QUICK		0x0040	/* SMBus quick command */
 #define	AT91_TWI_SWRST		0x0080	/* Software Reset */
 
 #define	AT91_TWI_MMR		0x0004	/* Master Mode Register */
@@ -212,7 +213,11 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 
 	INIT_COMPLETION(dev->cmd_complete);
 	dev->transfer_status = 0;
-	if (dev->msg->flags & I2C_M_RD) {
+
+	if (!dev->buf_len) {
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
+		at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+	} else if (dev->msg->flags & I2C_M_RD) {
 		unsigned start_flags = AT91_TWI_START;
 
 		if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) {