Merge tag 'v3.3-rc7' into gpio/next

Linux 3.3-rc7.  Merged into the gpio branch to pick up gpio bugfixes already
in mainline before queueing up move v3.4 patches

Documentation/devicetree/bindings/gpio/led.txt

@@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device.  Each
 node's name represents the name of the corresponding LED.
 
 LED sub-node properties:
-- gpios :  Should specify the LED's GPIO, see "Specifying GPIO information
-  for devices" in Documentation/devicetree/booting-without-of.txt.  Active
-  low LEDs should be indicated using flags in the GPIO specifier.
+- gpios :  Should specify the LED's GPIO, see "gpios property" in
+  Documentation/devicetree/gpio.txt.  Active low LEDs should be
+  indicated using flags in the GPIO specifier.
 - label :  (optional) The label for this LED.  If omitted, the label is
   taken from the node name (excluding the unit address).
 - linux,default-trigger :  (optional) This parameter, if present, is a

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -30,6 +30,7 @@ national	National Semiconductor
 nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
+picochip	Picochip Ltd
 powervr	Imagination Technologies
 qcom	Qualcomm, Inc.
 ramtron	Ramtron International

Documentation/hwmon/jc42

@@ -7,21 +7,29 @@ Supported chips:
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
-  * IDT TSE2002B3, TS3000B3
-    Prefix: 'tse2002b3', 'ts3000b3'
+  * Atmel AT30TS00
+    Prefix: 'at30ts00'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
-	http://www.idt.com/products/getdoc.cfm?docid=18715691
-	http://www.idt.com/products/getdoc.cfm?docid=18715692
+	http://www.atmel.com/Images/doc8585.pdf
+  * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
+    Prefix: 'tse2002', 'ts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
   * Maxim MAX6604
     Prefix: 'max6604'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
-  * Microchip MCP9805, MCP98242, MCP98243, MCP9843
-    Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
+  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
+    Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
+	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
@@ -48,6 +56,12 @@ Supported chips:
     Datasheets:
 	http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
 	http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
+  * ST Microelectronics STTS2002, STTS3000
+    Prefix: 'stts2002', 'stts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f

Documentation/input/alps.txt

@@ -13,7 +13,8 @@ Detection
 
 All ALPS touchpads should respond to the "E6 report" command sequence:
 E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
-00-00-64.
+00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s
+if some buttons are pressed.
 
 If the E6 report is successful, the touchpad model is identified using the "E7
 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is

Documentation/kernel-parameters.txt

@@ -2211,6 +2211,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			default: off.
 
+	printk.always_kmsg_dump=
+			Trigger kmsg_dump for cases other than kernel oops or
+			panics
+			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
+			default: disabled
+
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 

MAINTAINERS

@@ -269,7 +269,6 @@ S:	Orphan
 F:	drivers/platform/x86/wmi.c
 
 AD1889 ALSA SOUND DRIVER
-M:	Kyle McMartin <kyle@mcmartin.ca>
 M:	Thibaut Varene <T-Bone@parisc-linux.org>
 W:	http://wiki.parisc-linux.org/AD1889
 L:	linux-parisc@vger.kernel.org
@@ -963,7 +962,7 @@ F:	drivers/tty/serial/msm_serial.c
 F:	drivers/platform/msm/
 F:	drivers/*/pm8???-*
 F:	include/linux/mfd/pm8xxx/
-T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
@@ -1311,7 +1310,7 @@ F:	drivers/atm/
 F:	include/linux/atm*
 
 ATMEL AT91 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.atmel.com/products/AT91/
 W:	http://www.at91.com/
@@ -1319,7 +1318,7 @@ S:	Maintained
 F:	drivers/mmc/host/at91_mci.c
 
 ATMEL AT91 / AT32 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h
@@ -3047,7 +3046,6 @@ F:	drivers/hwspinlock/hwspinlock_*
 F:	include/linux/hwspinlock.h
 
 HARMONY SOUND DRIVER
-M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/parisc/harmony.*
@@ -3791,7 +3789,7 @@ F:	Documentation/kdump/
 
 KERNEL AUTOMOUNTER v4 (AUTOFS4)
 M:	Ian Kent <raven@themaw.net>
-L:	autofs@linux.kernel.org
+L:	autofs@vger.kernel.org
 S:	Maintained
 F:	fs/autofs4/
 
@@ -4696,7 +4694,7 @@ NTFS FILESYSTEM
 M:	Anton Altaparmakov <anton@tuxera.com>
 L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.tuxera.com/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs.git
 S:	Supported
 F:	Documentation/filesystems/ntfs.txt
 F:	fs/ntfs/
@@ -5009,9 +5007,8 @@ F:	Documentation/blockdev/paride.txt
 F:	drivers/block/paride/
 
 PARISC ARCHITECTURE
-M:	Kyle McMartin <kyle@mcmartin.ca>
-M:	Helge Deller <deller@gmx.de>
 M:	"James E.J. Bottomley" <jejb@parisc-linux.org>
+M:	Helge Deller <deller@gmx.de>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 Q:	http://patchwork.kernel.org/project/linux-parisc/list/
@@ -5870,7 +5867,7 @@ S:	Maintained
 F:	drivers/mmc/host/sdhci-spear.c
 
 SECURITY SUBSYSTEM
-M:	James Morris <jmorris@namei.org>
+M:	James Morris <james.l.morris@oracle.com>
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
 W:	http://security.wiki.kernel.org/
@@ -5883,7 +5880,7 @@ S:	Supported
 
 SELINUX SECURITY MODULE
 M:	Stephen Smalley <sds@tycho.nsa.gov>
-M:	James Morris <jmorris@namei.org>
+M:	James Morris <james.l.morris@oracle.com>
 M:	Eric Paris <eparis@parisplace.org>
 L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://selinuxproject.org
@@ -7283,7 +7280,7 @@ WATCHDOG DEVICE DRIVERS
 M:	Wim Van Sebroeck <wim@iguana.be>
 L:	linux-watchdog@vger.kernel.org
 W:	http://www.linux-watchdog.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
+T:	git git://www.linux-watchdog.org/linux-watchdog.git
 S:	Maintained
 F:	Documentation/watchdog/
 F:	drivers/watchdog/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/include/asm/futex.h

@@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	"	lda	$31,3b-2b(%0)\n"
 	"	.previous\n"
 	:	"+r"(ret), "=&r"(prev), "=&r"(cmp)
-	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
+	:	"r"(uaddr), "r"((long)(int)oldval), "r"(newval)
 	:	"memory");
 
 	*uval = prev;

arch/arm/Kconfig

@@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622
 	depends on CPU_V7
 	help
 	  This option enables the workaround for the 743622 Cortex-A9
-	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  (r2p*) erratum. Under very rare conditions, a faulty
 	  optimisation in the Cortex-A9 Store Buffer may lead to data
 	  corruption. This workaround sets a specific bit in the diagnostic
 	  register of the Cortex-A9 which disables the Store Buffer

arch/arm/boot/.gitignore

@@ -3,3 +3,4 @@ zImage
 xipImage
 bootpImage
 uImage
+*.dtb

arch/arm/boot/dts/exynos4210.dtsi

@@ -29,6 +29,7 @@
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
+		cpu-offset = <0x8000>;
 		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
 	};
 

arch/arm/boot/dts/tegra-paz00.dts

@@ -46,11 +46,11 @@
 	};
 
 	serial@70006200 {
-		status = "disable";
+		clock-frequency = <216000000>;
 	};
 
 	serial@70006300 {
-		clock-frequency = <216000000>;
+		status = "disable";
 	};
 
 	serial@70006400 {
@@ -60,7 +60,7 @@
 	sdhci@c8000000 {
 		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
 		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 169 0>; /* gpio PV1 */
 	};
 
 	sdhci@c8000200 {

arch/arm/common/it8152.c

@@ -320,13 +320,6 @@ err0:
 	return -EBUSY;
 }
 
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PCI bus master devices
 */

arch/arm/common/pl330.c

@@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 	struct pl330_thread *thrd = ch_id;
 	struct pl330_dmac *pl330;
 	unsigned long flags;
-	int ret = 0, active = thrd->req_running;
+	int ret = 0, active;
 
 	if (!thrd || thrd->free || thrd->dmac->state == DYING)
 		return -EINVAL;
 
 	pl330 = thrd->dmac;
+	active = thrd->req_running;
 
 	spin_lock_irqsave(&pl330->lock, flags);
 

arch/arm/include/asm/assembler.h

@@ -137,6 +137,11 @@
 	disable_irq
 	.endm
 
+	.macro	save_and_disable_irqs_notrace, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq_notrace
+	.endm
+
 /*
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.

arch/arm/include/asm/hardware/pl330.h

@@ -41,7 +41,7 @@ enum pl330_dstcachectrl {
 	DCCTRL1, /* Bufferable only */
 	DCCTRL2, /* Cacheable, but do not allocate */
 	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	DINVALID1 = 8,
+	DINVALID1,              /* AWCACHE = 0x1000 */
 	DINVALID2,
 	DCCTRL6, /* Cacheable write-through, allocate on writes only */
 	DCCTRL7, /* Cacheable write-back, allocate on writes only */

arch/arm/include/asm/pmu.h

@@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
 
 u64 armpmu_event_update(struct perf_event *event,
 			struct hw_perf_event *hwc,
-			int idx, int overflow);
+			int idx);
 
 int armpmu_event_set_period(struct perf_event *event,
 			    struct hw_perf_event *hwc,

arch/arm/include/asm/processor.h

@@ -22,6 +22,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
+#include <asm/system.h>
 
 #ifdef __KERNEL__
 #define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \

arch/arm/kernel/ecard.c

@@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
 
 	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
 
+	vma.vm_flags = VM_EXEC;
 	vma.vm_mm = mm;
 
 	flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);

arch/arm/kernel/perf_event.c

@@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event,
 u64
 armpmu_event_update(struct perf_event *event,
 		    struct hw_perf_event *hwc,
-		    int idx, int overflow)
+		    int idx)
 {
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
 	u64 delta, prev_raw_count, new_raw_count;
@@ -193,13 +193,7 @@ again:
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
-	new_raw_count &= armpmu->max_period;
-	prev_raw_count &= armpmu->max_period;
-
-	if (overflow)
-		delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
-	else
-		delta = new_raw_count - prev_raw_count;
+	delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
 
 	local64_add(delta, &event->count);
 	local64_sub(delta, &hwc->period_left);
@@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event)
 	if (hwc->idx < 0)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx, 0);
+	armpmu_event_update(event, hwc, hwc->idx);
 }
 
 static void
@@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags)
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
 		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx, 0);
+		armpmu_event_update(event, hwc, hwc->idx);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
 }
@@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event)
 	hwc->config_base	    |= (unsigned long)mapping;
 
 	if (!hwc->sample_period) {
-		hwc->sample_period  = armpmu->max_period;
+		/*
+		 * For non-sampling runs, limit the sample_period to half
+		 * of the counter width. That way, the new counter value
+		 * is far less likely to overtake the previous one unless
+		 * you have some serious IRQ latency issues.
+		 */
+		hwc->sample_period  = armpmu->max_period >> 1;
 		hwc->last_period    = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
@@ -679,6 +679,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu)
 	armpmu->type = ARM_PMU_DEVICE_CPU;
 }
 
+/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
+					unsigned long action, void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+		return NOTIFY_DONE;
+
+	if (cpu_pmu && cpu_pmu->reset)
+		cpu_pmu->reset(NULL);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
+	.notifier_call = pmu_cpu_notify,
+};
+
 /*
  * CPU PMU identification and registration.
  */
@@ -730,6 +752,7 @@ init_hw_perf_events(void)
 		pr_info("enabled with %s PMU driver, %d counters available\n",
 			cpu_pmu->name, cpu_pmu->num_events);
 		cpu_pmu_init(cpu_pmu);
+		register_cpu_notifier(&pmu_cpu_notifier);
 		armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
 	} else {
 		pr_info("no hardware support available\n");

arch/arm/kernel/perf_event_v6.c

@@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
-static int counter_is_active(unsigned long pmcr, int idx)
-{
-	unsigned long mask = 0;
-	if (idx == ARMV6_CYCLE_COUNTER)
-		mask = ARMV6_PMCR_CCOUNT_IEN;
-	else if (idx == ARMV6_COUNTER0)
-		mask = ARMV6_PMCR_COUNT0_IEN;
-	else if (idx == ARMV6_COUNTER1)
-		mask = ARMV6_PMCR_COUNT1_IEN;
-
-	if (mask)
-		return pmcr & mask;
-
-	WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-	return 0;
-}
-
 static irqreturn_t
 armv6pmu_handle_irq(int irq_num,
 		    void *dev)
@@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num,
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!counter_is_active(pmcr, idx))
+		/* Ignore if we don't have an event. */
+		if (!event)
 			continue;
 
 		/*
@@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num,
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;

arch/arm/kernel/perf_event_v7.c

@@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx)
 
 	counter = ARMV7_IDX_TO_COUNTER(idx);
 	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
+	isb();
+	/* Clear the overflow flag in case an interrupt is pending. */
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
+	isb();
+
 	return idx;
 }
 
@@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		/* Ignore if we don't have an event. */
+		if (!event)
+			continue;
+
 		/*
 		 * We have a single interrupt for all counters. Check that
 		 * each counter has overflowed before we process it.
@@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;

arch/arm/kernel/perf_event_xscale.c

@@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		if (!event)
+			continue;
+
 		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+		if (!event)
+			continue;
+
+		if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
 static void
 xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
-	unsigned long flags, ien, evtsel;
+	unsigned long flags, ien, evtsel, of_flags;
 	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
 	ien = xscale2pmu_read_int_enable();
@@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	switch (idx) {
 	case XSCALE_CYCLE_COUNTER:
 		ien &= ~XSCALE2_CCOUNT_INT_EN;
+		of_flags = XSCALE2_CCOUNT_OVERFLOW;
 		break;
 	case XSCALE_COUNTER0:
 		ien &= ~XSCALE2_COUNT0_INT_EN;
 		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+		of_flags = XSCALE2_COUNT0_OVERFLOW;
 		break;
 	case XSCALE_COUNTER1:
 		ien &= ~XSCALE2_COUNT1_INT_EN;
 		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+		of_flags = XSCALE2_COUNT1_OVERFLOW;
 		break;
 	case XSCALE_COUNTER2:
 		ien &= ~XSCALE2_COUNT2_INT_EN;
 		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+		of_flags = XSCALE2_COUNT2_OVERFLOW;
 		break;
 	case XSCALE_COUNTER3:
 		ien &= ~XSCALE2_COUNT3_INT_EN;
 		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+		of_flags = XSCALE2_COUNT3_OVERFLOW;
 		break;
 	default:
 		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
+	xscale2pmu_write_overflow_flags(of_flags);
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 

arch/arm/kernel/ptrace.c

@@ -23,6 +23,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
+#include <linux/audit.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
@@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 	if (!ip)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))

arch/arm/kernel/smp_twd.c

@@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = {
 
 static int twd_cpufreq_init(void)
 {
-	if (!IS_ERR(twd_clk))
+	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return cpufreq_register_notifier(&twd_cpufreq_nb,
 			CPUFREQ_TRANSITION_NOTIFIER);
 

arch/arm/mach-at91/at91rm9200_devices.c

@@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

arch/arm/mach-at91/at91sam9260_devices.c

@@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
@@ -1215,8 +1215,7 @@ void __init at91_add_device_serial(void) {}
  *  CF/IDE
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
-	defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
 	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
 
 static struct at91_cf_data cf0_data;
@@ -1313,10 +1312,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	if (data->flags & AT91_CF_TRUE_IDE)
 #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
 		pdev->name = "pata_at91";
-#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
-		pdev->name = "at91_ide";
 #else
-#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
 #endif
 	else
 		pdev->name = "at91_cf";

arch/arm/mach-at91/at91sam9261_devices.c

@@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

arch/arm/mach-at91/at91sam9263_devices.c

@@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
@@ -355,8 +355,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  Compact Flash (PCMCIA or IDE)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
-    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
 
 static struct at91_cf_data cf0_data;
 
@@ -450,7 +450,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
 	at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
 
-	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
 	platform_device_register(pdev);
 }
 #else

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -38,10 +38,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 8,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_BASE_DMA,
@@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9g45_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
-	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
-	platform_device_register(&at_hdmac_device);
+#if defined(CONFIG_OF)
+	struct device_node *of_node =
+		of_find_node_by_name(NULL, "dma-controller");
+
+	if (of_node)
+		of_node_put(of_node);
+	else
+#endif
+		platform_device_register(&at_hdmac_device);
 }
 #else
 void __init at91_add_device_hdmac(void) {}

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -33,10 +33,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 2,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9RL_BASE_DMA,
@@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9rl_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
 	platform_device_register(&at_hdmac_device);
 }
 #else

arch/arm/mach-at91/include/mach/at91sam9_smc.h

@@ -18,6 +18,35 @@
 
 #include <mach/cpu.h>
 
+#ifndef __ASSEMBLY__
+struct sam9_smc_config {
+	/* Setup register */
+	u8 ncs_read_setup;
+	u8 nrd_setup;
+	u8 ncs_write_setup;
+	u8 nwe_setup;
+
+	/* Pulse register */
+	u8 ncs_read_pulse;
+	u8 nrd_pulse;
+	u8 ncs_write_pulse;
+	u8 nwe_pulse;
+
+	/* Cycle register */
+	u16 read_cycle;
+	u16 write_cycle;
+
+	/* Mode register */
+	u32 mode;
+	u8 tdf_cycles:4;
+};
+
+extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
+#endif
+
 #define AT91_SMC_SETUP		0x00				/* Setup Register for CS n */
 #define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
 #define			AT91_SMC_NWESETUP_(x)	((x) << 0)

arch/arm/mach-at91/sam9_smc.c

@@ -2,6 +2,7 @@
  * linux/arch/arm/mach-at91/sam9_smc.c
  *
  * Copyright (C) 2008 Andrew Victor
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -22,7 +23,22 @@
 
 static void __iomem *smc_base_addr[2];
 
-static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config)
+static void sam9_smc_cs_write_mode(void __iomem *base,
+					struct sam9_smc_config *config)
+{
+	__raw_writel(config->mode
+		   | AT91_SMC_TDF_(config->tdf_cycles),
+		   base + AT91_SMC_MODE);
+}
+
+void sam9_smc_write_mode(int id, int cs,
+					struct sam9_smc_config *config)
+{
+	sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_configure(void __iomem *base,
+					struct sam9_smc_config *config)
 {
 
 	/* Setup register */
@@ -45,16 +61,66 @@ static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_con
 		   base + AT91_SMC_CYCLE);
 
 	/* Mode register */
-	__raw_writel(config->mode
-		   | AT91_SMC_TDF_(config->tdf_cycles),
-		   base + AT91_SMC_MODE);
+	sam9_smc_cs_write_mode(base, config);
 }
 
-void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config)
+void sam9_smc_configure(int id, int cs,
+					struct sam9_smc_config *config)
 {
 	sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
 }
 
+static void sam9_smc_cs_read_mode(void __iomem *base,
+					struct sam9_smc_config *config)
+{
+	u32 val = __raw_readl(base + AT91_SMC_MODE);
+
+	config->mode = (val & ~AT91_SMC_NWECYCLE);
+	config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
+}
+
+void sam9_smc_read_mode(int id, int cs,
+					struct sam9_smc_config *config)
+{
+	sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_read(void __iomem *base,
+					struct sam9_smc_config *config)
+{
+	u32 val;
+
+	/* Setup register */
+	val = __raw_readl(base + AT91_SMC_SETUP);
+
+	config->nwe_setup = val & AT91_SMC_NWESETUP;
+	config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
+	config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
+	config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
+
+	/* Pulse register */
+	val = __raw_readl(base + AT91_SMC_PULSE);
+
+	config->nwe_setup = val & AT91_SMC_NWEPULSE;
+	config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
+	config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
+	config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
+
+	/* Cycle register */
+	val = __raw_readl(base + AT91_SMC_CYCLE);
+
+	config->write_cycle = val & AT91_SMC_NWECYCLE;
+	config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
+
+	/* Mode register */
+	sam9_smc_cs_read_mode(base, config);
+}
+
+void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
+{
+	sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
+}
+
 void __init at91sam9_ioremap_smc(int id, u32 addr)
 {
 	if (id > 1) {

arch/arm/mach-at91/sam9_smc.h

@@ -8,27 +8,4 @@
  * published by the Free Software Foundation.
  */
 
-struct sam9_smc_config {
-	/* Setup register */
-	u8 ncs_read_setup;
-	u8 nrd_setup;
-	u8 ncs_write_setup;
-	u8 nwe_setup;
-
-	/* Pulse register */
-	u8 ncs_read_pulse;
-	u8 nrd_pulse;
-	u8 ncs_write_pulse;
-	u8 nwe_pulse;
-
-	/* Cycle register */
-	u16 read_cycle;
-	u16 write_cycle;
-
-	/* Mode register */
-	u32 mode;
-	u8 tdf_cycles:4;
-};
-
-extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config);
 extern void __init at91sam9_ioremap_smc(int id, u32 addr);

arch/arm/mach-dove/common.c

@@ -28,6 +28,7 @@
 #include <asm/mach/arch.h>
 #include <linux/irq.h>
 #include <plat/time.h>
+#include <plat/ehci-orion.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
 #include "common.h"
@@ -71,7 +72,7 @@ void __init dove_map_io(void)
  ****************************************************************************/
 void __init dove_ehci0_init(void)
 {
-	orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
+	orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA);
 }
 
 /*****************************************************************************

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -32,7 +32,9 @@
 #include <mach/hardware.h>
 #include <mach/fb.h>
 #include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -153,7 +155,6 @@ static struct i2c_board_info vision_i2c_info[] __initdata = {
 	}, {
 		I2C_BOARD_INFO("pca9539", 0x74),
 		.platform_data	= &pca953x_74_gpio_data,
-		.irq		= gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
 	}, {
 		I2C_BOARD_INFO("pca9539", 0x75),
 		.platform_data	= &pca953x_75_gpio_data,
@@ -348,6 +349,8 @@ static void __init vision_init_machine(void)
 				"pca9539:74"))
 		pr_warn("cannot request interrupt gpio for pca9539:74\n");
 
+	vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
+
 	ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
 				ARRAY_SIZE(vision_i2c_info));
 	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
@@ -359,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.atag_offset	= 0x100,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
 	.restart	= ep93xx_restart,

arch/arm/mach-exynos/clock-exynos4210.c

@@ -32,6 +32,7 @@
 
 #include "common.h"
 
+#ifdef CONFIG_PM_SLEEP
 static struct sleep_save exynos4210_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKSRC_LCD1),
@@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = {
 	SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
 	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
 };
+#endif
 
 static struct clksrc_clk *sysclks[] = {
 	/* nothing here yet */

arch/arm/mach-exynos/clock-exynos4212.c

@@ -32,12 +32,14 @@
 
 #include "common.h"
 
+#ifdef CONFIG_PM_SLEEP
 static struct sleep_save exynos4212_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKDIV_IMAGE),
 	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
 	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
 };
+#endif
 
 static struct clk *clk_src_mpll_user_list[] = {
 	[0] = &clk_fin_mpll,

arch/arm/mach-exynos/clock.c

@@ -30,6 +30,7 @@
 
 #include "common.h"
 
+#ifdef CONFIG_PM_SLEEP
 static struct sleep_save exynos4_clock_save[] = {
 	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
 	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
@@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = {
 	SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
 	SAVE_ITEM(S5P_CLKGATE_IP_CPU),
 };
+#endif
 
 struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",

arch/arm/mach-exynos/mach-exynos4-dt.c

@@ -15,11 +15,13 @@
 #include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <mach/map.h>
 
 #include <plat/cpu.h>
 #include <plat/regs-serial.h>
-#include <plat/exynos4.h>
+
+#include "common.h"
 
 /*
  * The following lookup table is used to override device names when devices
@@ -60,7 +62,7 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
 
 static void __init exynos4210_dt_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 }
 
@@ -79,7 +81,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
 	.init_irq	= exynos4_init_irq,
 	.map_io		= exynos4210_dt_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos4210_dt_machine_init,
 	.timer		= &exynos4_timer,
 	.dt_compat	= exynos4210_dt_compat,
+	.restart        = exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-nuri.c

@@ -220,14 +220,14 @@ static struct s3c_fb_pd_win nuri_fb_win0 = {
 		.lower_margin	= 1,
 		.hsync_len	= 48,
 		.vsync_len	= 3,
-		.xres		= 1280,
-		.yres		= 800,
+		.xres		= 1024,
+		.yres		= 600,
 		.refresh	= 60,
 	},
 	.max_bpp	= 24,
 	.default_bpp	= 16,
-	.virtual_x	= 1280,
-	.virtual_y	= 800,
+	.virtual_x	= 1024,
+	.virtual_y	= 2 * 600,
 };
 
 static struct s3c_fb_platdata nuri_fb_pdata __initdata = {

arch/arm/mach-exynos/mach-universal_c210.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
@@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = {
 	.threshold	= 0x28,
 	.voltage	= 2800000,		/* 2.8V */
 	.orient		= MXT_DIAGONAL,
+	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 
 static struct i2c_board_info i2c3_devs[] __initdata = {
@@ -910,7 +912,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
 		.bus_type	= FIMC_MIPI_CSI2,
 		.board_info	= &m5mols_board_info,
 		.i2c_bus_num	= 0,
-		.clk_frequency	= 21600000UL,
+		.clk_frequency	= 24000000UL,
 		.csi_data_align	= 32,
 	},
 };

arch/arm/mach-exynos/pm.c

@@ -206,7 +206,7 @@ static void exynos4_pm_prepare(void)
 
 }
 
-static int exynos4_pm_add(struct device *dev)
+static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif)
 {
 	pm_cpu_prep = exynos4_pm_prepare;
 	pm_cpu_sleep = exynos4_cpu_suspend;
@@ -384,7 +384,9 @@ static void exynos4_pm_resume(void)
 
 	exynos4_restore_pll();
 
+#ifdef CONFIG_SMP
 	scu_enable(S5P_VA_SCU);
+#endif
 
 #ifdef CONFIG_CACHE_L2X0
 	s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));

arch/arm/mach-kirkwood/common.c

@@ -27,6 +27,7 @@
 #include <plat/cache-feroceon-l2.h>
 #include <plat/mvsdio.h>
 #include <plat/orion_nand.h>
+#include <plat/ehci-orion.h>
 #include <plat/common.h>
 #include <plat/time.h>
 #include <plat/addr-map.h>
@@ -73,7 +74,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
 void __init kirkwood_ehci_init(void)
 {
 	kirkwood_clk_ctrl |= CGC_USB0;
-	orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB);
+	orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
 }
 
 

arch/arm/mach-kirkwood/mpp.h

@@ -31,314 +31,314 @@
 #define MPP_F6282_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP0_NF_IO2		MPP(  0, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP0_NF_IO2		MPP(  0, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP1_NF_IO3		MPP(  1, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP1_NF_IO3		MPP(  1, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP2_NF_IO4		MPP(  2, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP2_NF_IO4		MPP(  2, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP3_NF_IO5		MPP(  3, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP3_SPI_MISO		MPP(  3, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP3_NF_IO5		MPP(  3, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP3_SPI_MISO		MPP(  3, 0x2, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP4_NF_IO6		MPP(  4, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP4_UART0_RXD		MPP(  4, 0x2, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP4_NF_IO6		MPP(  4, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP4_UART0_RXD		MPP(  4, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP4_LCD_VGA_HSYNC	MPP(  4, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP4_PTP_CLK		MPP(  4, 0xd, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP4_PTP_CLK		MPP(  4, 0xd, 0, 0, 1,   1,   1,   1,   0 )
 
 #define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP5_NF_IO7		MPP(  5, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 1, 1,   1,   1,   1,   0 )
-#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP5_NF_IO7		MPP(  5, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP5_LCD_VGA_VSYNC	MPP(  5, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 0, 1,   1,   1,   1,   0 )
 
 #define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 1, 1,   1,   1,   1,   0 )
-#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 1, 1,   1,   1,   1,   0 )
-#define MPP7_LCD_PWM		MPP(  7, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP7_LCD_PWM		MPP(  7, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP8_TW0_SDA		MPP(  8, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP8_MII0_RXERR		MPP(  8, 0x4, 1, 0, 0,   1,   1,   1,   1 )
-#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP8_PTP_CLK		MPP(  8, 0xc, 1, 0, 1,   1,   1,   1,   0 )
-#define MPP8_MII0_COL		MPP(  8, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP8_TW0_SDA		MPP(  8, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP8_MII0_RXERR		MPP(  8, 0x4, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP8_PTP_CLK		MPP(  8, 0xc, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP8_MII0_COL		MPP(  8, 0xd, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP9_TW0_SCK		MPP(  9, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP9_UART0_CTS		MPP(  9, 0x2, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP9_UART1_CTS		MPP(  9, 0x3, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 1, 0,   1,   1,   1,   1 )
-#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 1, 0, 1,   1,   1,   1,   0 )
-#define MPP9_MII0_CRS		MPP(  9, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP9_TW0_SCK		MPP(  9, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP9_UART0_CTS		MPP(  9, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP9_UART1_CTS		MPP(  9, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP9_MII0_CRS		MPP(  9, 0xd, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 0, 1,   1,   1,   1,   0 )
 
 #define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP11_SPI_MISO		MPP( 11, 0x2, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP11_UART0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 1, 0, 1,   1,   1,   1,   0 )
-#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 1, 1,   1,   1,   1,   0 )
-#define MPP11_PTP_CLK		MPP( 11, 0xd, 1, 0, 1,   1,   1,   1,   0 )
-#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP11_SPI_MISO		MPP( 11, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP11_UART0_RXD		MPP( 11, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP11_PTP_CLK		MPP( 11, 0xd, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 0, 0,   1,   1,   1,   1 )
 
 #define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1,   1 )
 #define MPP12_GPIO		MPP( 12, 0x0, 1, 1, 0,   0,   0,   1,   0 )
-#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP12_AU_SPDIF0		MPP( 12, 0xa, 0, 1, 0,   0,   0,   0,   1 )
-#define MPP12_SPI_MOSI		MPP( 12, 0xb, 0, 1, 0,   0,   0,   0,   1 )
-#define MPP12_TW1_SDA		MPP( 12, 0xd, 1, 0, 0,   0,   0,   0,   1 )
+#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP12_AU_SPDIF0		MPP( 12, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP12_SPI_MOSI		MPP( 12, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP12_TW1_SDA		MPP( 12, 0xd, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP13_SD_CMD		MPP( 13, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP13_AU_SPDIFRMCLK	MPP( 13, 0xa, 0, 1, 0,   0,   0,   0,   1 )
-#define MPP13_LCDPWM		MPP( 13, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP13_SD_CMD		MPP( 13, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP13_AU_SPDIFRMCLK	MPP( 13, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP13_LCDPWM		MPP( 13, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP14_SD_D0		MPP( 14, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP14_UART1_RXD		MPP( 14, 0x3, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP14_AU_SPDIFI		MPP( 14, 0xa, 1, 0, 0,   0,   0,   0,   1 )
-#define MPP14_AU_I2SDI		MPP( 14, 0xb, 1, 0, 0,   0,   0,   0,   1 )
-#define MPP14_MII0_COL		MPP( 14, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP14_SD_D0		MPP( 14, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP14_UART1_RXD		MPP( 14, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP14_AU_SPDIFI		MPP( 14, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP14_AU_I2SDI		MPP( 14, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP14_MII0_COL		MPP( 14, 0xd, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP15_SD_D1		MPP( 15, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 1, 0,   1,   1,   1,   1 )
-#define MPP15_SPI_CSn		MPP( 15, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP15_SD_D1		MPP( 15, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP15_SPI_CSn		MPP( 15, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP16_SD_D2		MPP( 16, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP16_UART0_CTS		MPP( 16, 0x2, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP16_UART1_RXD		MPP( 16, 0x3, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP16_LCD_EXT_REF_CLK	MPP( 16, 0xb, 1, 0, 0,   0,   0,   0,   1 )
-#define MPP16_MII0_CRS		MPP( 16, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP16_SD_D2		MPP( 16, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP16_UART0_CTS		MPP( 16, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP16_UART1_RXD		MPP( 16, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP16_LCD_EXT_REF_CLK	MPP( 16, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP16_MII0_CRS		MPP( 16, 0xd, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP17_SD_D3		MPP( 17, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 1, 0,   1,   1,   1,   1 )
-#define MPP17_SATA1_ACTn	MPP( 17, 0xa, 0, 1, 0,   0,   0,   0,   1 )
-#define MPP17_TW1_SCK		MPP( 17, 0xd, 1, 1, 0,   0,   0,   0,   1 )
+#define MPP17_SD_D3		MPP( 17, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP17_SATA1_ACTn	MPP( 17, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP17_TW1_SCK		MPP( 17, 0xd, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP18_NF_IO0		MPP( 18, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP18_PEX0_CLKREQ	MPP( 18, 0x2, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP18_NF_IO0		MPP( 18, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP18_PEX0_CLKREQ	MPP( 18, 0x2, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP19_NF_IO1		MPP( 19, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP19_NF_IO1		MPP( 19, 0x1, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP20_TSMP0		MPP( 20, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP20_TSMP0		MPP( 20, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP20_GE1_TXD0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP20_AU_SPDIFI		MPP( 20, 0x4, 1, 0, 0,   0,   1,   1,   1 )
-#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP20_AU_SPDIFI		MPP( 20, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP20_LCD_D0		MPP( 20, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP21_TSMP1		MPP( 21, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP21_TSMP1		MPP( 21, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP21_GE1_TXD1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP21_AU_SPDIFO		MPP( 21, 0x4, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP21_AU_SPDIFO		MPP( 21, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP21_LCD_D1		MPP( 21, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP22_TSMP2		MPP( 22, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_TSMP2		MPP( 22, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP22_GE1_TXD2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP22_AU_SPDIFRMKCLK	MPP( 22, 0x4, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_AU_SPDIFRMKCLK	MPP( 22, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP22_LCD_D2		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP23_TSMP3		MPP( 23, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP23_TSMP3		MPP( 23, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP23_GE1_TXD3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP23_AU_I2SBCLK	MPP( 23, 0x4, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP23_AU_I2SBCLK	MPP( 23, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP23_LCD_D3		MPP( 23, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP24_TSMP4		MPP( 24, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP24_TDM_SPI_CS0	MPP( 24, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP24_TSMP4		MPP( 24, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP24_TDM_SPI_CS0	MPP( 24, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP24_GE1_RXD0		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP24_AU_I2SDO		MPP( 24, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP24_AU_I2SDO		MPP( 24, 0x4, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP24_LCD_D4		MPP( 24, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP25_TSMP5		MPP( 25, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP25_TSMP5		MPP( 25, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP25_GE1_RXD1		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP25_AU_I2SLRCLK	MPP( 25, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP25_AU_I2SLRCLK	MPP( 25, 0x4, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP25_LCD_D5		MPP( 25, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP26_TSMP6		MPP( 26, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP26_TSMP6		MPP( 26, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP26_GE1_RXD2		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP26_AU_I2SMCLK	MPP( 26, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP26_AU_I2SMCLK	MPP( 26, 0x4, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP26_LCD_D6		MPP( 26, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP27_TSMP7		MPP( 27, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP27_TSMP7		MPP( 27, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP27_GE1_RXD3		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP27_AU_I2SDI		MPP( 27, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP27_AU_I2SDI		MPP( 27, 0x4, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP27_LCD_D7		MPP( 27, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP28_TSMP8		MPP( 28, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP28_TSMP8		MPP( 28, 0x1, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP28_GE1_COL		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP28_AU_EXTCLK		MPP( 28, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP28_AU_EXTCLK		MPP( 28, 0x4, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP28_LCD_D8		MPP( 28, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP29_TSMP9		MPP( 29, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP29_TSMP9		MPP( 29, 0x1, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP29_GE1_TCLK		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP29_LCD_D9		MPP( 29, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP30_TSMP10		MPP( 30, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP30_TDM_PCLK		MPP( 30, 0x2, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP30_TSMP10		MPP( 30, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP30_TDM_PCLK		MPP( 30, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP30_GE1_RXCTL		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP30_LCD_D10		MPP( 30, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP31_TSMP11		MPP( 31, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP31_TDM_FS		MPP( 31, 0x2, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP31_TSMP11		MPP( 31, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP31_TDM_FS		MPP( 31, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP31_GE1_RXCLK		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP31_LCD_D11		MPP( 31, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP32_TSMP12		MPP( 32, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP32_TDM_DRX		MPP( 32, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP32_TSMP12		MPP( 32, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP32_TDM_DRX		MPP( 32, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP32_GE1_TCLKOUT	MPP( 32, 0x3, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP32_LCD_D12		MPP( 32, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP33_GPO		MPP( 33, 0x0, 0, 1, 0,   1,   1,   1,   1 )
-#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP33_GE1_TXCTL		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP33_LCD_D13		MPP( 33, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP34_GE1_TXEN		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP34_SATA1_ACTn	MPP( 34, 0x5, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP34_SATA1_ACTn	MPP( 34, 0x5, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP34_LCD_D14		MPP( 34, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP35_GE1_RXERR		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP35_LCD_D15		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP35_MII0_RXERR	MPP( 35, 0xc, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP35_MII0_RXERR	MPP( 35, 0xc, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP36_TSMP0		MPP( 36, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP36_AU_SPDIFI		MPP( 36, 0x4, 1, 0, 1,   0,   0,   1,   1 )
-#define MPP36_TW1_SDA		MPP( 36, 0xb, 1, 1, 0,   0,   0,   0,   1 )
+#define MPP36_TSMP0		MPP( 36, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP36_AU_SPDIFI		MPP( 36, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP36_TW1_SDA		MPP( 36, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP37_TSMP1		MPP( 37, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP37_AU_SPDIFO		MPP( 37, 0x4, 0, 1, 1,   0,   0,   1,   1 )
-#define MPP37_TW1_SCK		MPP( 37, 0xb, 1, 1, 0,   0,   0,   0,   1 )
+#define MPP37_TSMP1		MPP( 37, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP37_AU_SPDIFO		MPP( 37, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP37_TW1_SCK		MPP( 37, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP38_TSMP2		MPP( 38, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP38_AU_SPDIFRMLCLK	MPP( 38, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP38_TSMP2		MPP( 38, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP38_AU_SPDIFRMLCLK	MPP( 38, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP38_LCD_D18		MPP( 38, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP39_TSMP3		MPP( 39, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP39_AU_I2SBCLK	MPP( 39, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP39_TSMP3		MPP( 39, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP39_AU_I2SBCLK	MPP( 39, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP39_LCD_D19		MPP( 39, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP40_TSMP4		MPP( 40, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP40_AU_I2SDO		MPP( 40, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP40_TSMP4		MPP( 40, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP40_AU_I2SDO		MPP( 40, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP40_LCD_D20		MPP( 40, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP41_TSMP5		MPP( 41, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 1, 0, 0,   0,   0,   1,   1 )
-#define MPP41_AU_I2SLRCLK	MPP( 41, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP41_TSMP5		MPP( 41, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP41_AU_I2SLRCLK	MPP( 41, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP41_LCD_D21		MPP( 41, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP42_TSMP6		MPP( 42, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP42_AU_I2SMCLK	MPP( 42, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP42_TSMP6		MPP( 42, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP42_AU_I2SMCLK	MPP( 42, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP42_LCD_D22		MPP( 42, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP43_TSMP7		MPP( 43, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP43_TSMP7		MPP( 43, 0x1, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP43_AU_I2SDI		MPP( 43, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP43_AU_I2SDI		MPP( 43, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP43_LCD_D23		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP44_TSMP8		MPP( 44, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP44_TSMP8		MPP( 44, 0x1, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP44_AU_EXTCLK		MPP( 44, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP44_AU_EXTCLK		MPP( 44, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP44_LCD_CLK		MPP( 44, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP45_TSMP9		MPP( 45, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP45_TDM_PCLK		MPP( 45, 0x2, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP45_TSMP9		MPP( 45, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP45_TDM_PCLK		MPP( 45, 0x2, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP245_LCD_E		MPP( 45, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP46_TSMP10		MPP( 46, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP46_TDM_FS		MPP( 46, 0x2, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP46_TSMP10		MPP( 46, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP46_TDM_FS		MPP( 46, 0x2, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP46_LCD_HSYNC		MPP( 46, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP47_TSMP11		MPP( 47, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP47_TDM_DRX		MPP( 47, 0x2, 1, 0, 0,   0,   0,   1,   1 )
+#define MPP47_TSMP11		MPP( 47, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP47_TDM_DRX		MPP( 47, 0x2, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP47_LCD_VSYNC		MPP( 47, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP48_TSMP12		MPP( 48, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP48_LCD_D16		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1,   0 )
 #define MPP49_GPO		MPP( 49, 0x0, 0, 1, 0,   0,   0,   0,   1 )
-#define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1,   0 )
-#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP49_PTP_CLK		MPP( 49, 0x5, 1, 0, 0,   0,   0,   1,   0 )
-#define MPP49_PEX0_CLKREQ	MPP( 49, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP49_TSMP9		MPP( 49, 0x1, 0, 0, 0,   0,   0,   1,   0 )
+#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP49_PTP_CLK		MPP( 49, 0x5, 0, 0, 0,   0,   0,   1,   0 )
+#define MPP49_PEX0_CLKREQ	MPP( 49, 0xa, 0, 0, 0,   0,   0,   0,   1 )
 #define MPP49_LCD_D17		MPP( 49, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP_MAX			49

arch/arm/mach-lpc32xx/include/mach/irqs.h

@@ -61,7 +61,7 @@
  */
 #define IRQ_LPC32XX_JTAG_COMM_TX	LPC32XX_SIC1_IRQ(1)
 #define IRQ_LPC32XX_JTAG_COMM_RX	LPC32XX_SIC1_IRQ(2)
-#define IRQ_LPC32XX_GPI_11		LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_GPI_28		LPC32XX_SIC1_IRQ(4)
 #define IRQ_LPC32XX_TS_P		LPC32XX_SIC1_IRQ(6)
 #define IRQ_LPC32XX_TS_IRQ		LPC32XX_SIC1_IRQ(7)
 #define IRQ_LPC32XX_TS_AUX		LPC32XX_SIC1_IRQ(8)

arch/arm/mach-lpc32xx/irq.c

@@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
 		.event_group = &lpc32xx_event_pin_regs,
 		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
 	},
+	[IRQ_LPC32XX_GPI_28] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
+	},
 	[IRQ_LPC32XX_GPIO_00] = {
 		.event_group = &lpc32xx_event_int_regs,
 		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
@@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
 
 		if (state)
 			eventreg |= lpc32xx_events[d->irq].mask;
-		else
+		else {
 			eventreg &= ~lpc32xx_events[d->irq].mask;
 
+			/*
+			 * When disabling the wakeup, clear the latched
+			 * event
+			 */
+			__raw_writel(lpc32xx_events[d->irq].mask,
+				lpc32xx_events[d->irq].
+				event_group->rawstat_reg);
+		}
+
 		__raw_writel(eventreg,
 			lpc32xx_events[d->irq].event_group->enab_reg);
 
@@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void)
 
 	/* Setup SIC1 */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+	__raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+	__raw_writel(SIC1_ATR_DEFAULT,
+				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
 
 	/* Setup SIC2 */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+	__raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+	__raw_writel(SIC2_ATR_DEFAULT,
+				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
 
 	/* Configure supported IRQ's */
 	for (i = 0; i < NR_IRQS; i++) {

arch/arm/mach-lpc32xx/serial.c

@@ -88,6 +88,7 @@ struct uartinit {
 	char *uart_ck_name;
 	u32 ck_mode_mask;
 	void __iomem *pdiv_clk_reg;
+	resource_size_t mapbase;
 };
 
 static struct uartinit uartinit_data[] __initdata = {
@@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+		.mapbase = LPC32XX_UART5_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
@@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+		.mapbase = LPC32XX_UART3_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
@@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+		.mapbase = LPC32XX_UART4_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
@@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+		.mapbase = LPC32XX_UART6_BASE,
 	},
 #endif
 };
@@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void)
 
 		/* pre-UART clock divider set to 1 */
 		__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+
+		/*
+		 * Force a flush of the RX FIFOs to work around a
+		 * HW bug
+		 */
+		puart = uartinit_data[i].mapbase;
+		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+		__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+		j = LPC32XX_SUART_FIFO_SIZE;
+		while (j--)
+			tmp = __raw_readl(
+				LPC32XX_UART_DLL_FIFO(puart));
+		__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
 	}
 
 	/* This needs to be done after all UART clocks are setup */
 	__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
-	for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
 		/* Force a flush of the RX FIFOs to work around a HW bug */
 		puart = serial_std_platform_data[i].mapbase;
 		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));

arch/arm/mach-mmp/aspenite.c

@@ -17,7 +17,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/interrupt.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-mmp/pxa168.c

@@ -24,7 +24,6 @@
 #include <mach/dma.h>
 #include <mach/devices.h>
 #include <mach/mfp.h>
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <mach/pxa168.h>
 

arch/arm/mach-mmp/tavorevb.c

@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-mv78xx0/common.c

@@ -19,6 +19,7 @@
 #include <mach/mv78xx0.h>
 #include <mach/bridge-regs.h>
 #include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
 #include <plat/orion_nand.h>
 #include <plat/time.h>
 #include <plat/common.h>
@@ -169,7 +170,7 @@ void __init mv78xx0_map_io(void)
  ****************************************************************************/
 void __init mv78xx0_ehci0_init(void)
 {
-	orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0);
+	orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA);
 }
 
 

arch/arm/mach-mv78xx0/mpp.h

@@ -24,296 +24,296 @@
 #define MPP_78100_A0_MASK    MPP(0, 0x0, 0, 0, 1)
 
 #define MPP0_GPIO        MPP(0, 0x0, 1, 1, 1)
-#define MPP0_GE0_COL        MPP(0, 0x1, 1, 0, 1)
-#define MPP0_GE1_TXCLK        MPP(0, 0x2, 0, 1, 1)
+#define MPP0_GE0_COL        MPP(0, 0x1, 0, 0, 1)
+#define MPP0_GE1_TXCLK        MPP(0, 0x2, 0, 0, 1)
 #define MPP0_UNUSED        MPP(0, 0x3, 0, 0, 1)
 
 #define MPP1_GPIO        MPP(1, 0x0, 1, 1, 1)
-#define MPP1_GE0_RXERR        MPP(1, 0x1, 1, 0, 1)
-#define MPP1_GE1_TXCTL        MPP(1, 0x2, 0, 1, 1)
+#define MPP1_GE0_RXERR        MPP(1, 0x1, 0, 0, 1)
+#define MPP1_GE1_TXCTL        MPP(1, 0x2, 0, 0, 1)
 #define MPP1_UNUSED        MPP(1, 0x3, 0, 0, 1)
 
 #define MPP2_GPIO        MPP(2, 0x0, 1, 1, 1)
-#define MPP2_GE0_CRS        MPP(2, 0x1, 1, 0, 1)
-#define MPP2_GE1_RXCTL        MPP(2, 0x2, 1, 0, 1)
+#define MPP2_GE0_CRS        MPP(2, 0x1, 0, 0, 1)
+#define MPP2_GE1_RXCTL        MPP(2, 0x2, 0, 0, 1)
 #define MPP2_UNUSED        MPP(2, 0x3, 0, 0, 1)
 
 #define MPP3_GPIO        MPP(3, 0x0, 1, 1, 1)
-#define MPP3_GE0_TXERR        MPP(3, 0x1, 0, 1, 1)
-#define MPP3_GE1_RXCLK        MPP(3, 0x2, 1, 0, 1)
+#define MPP3_GE0_TXERR        MPP(3, 0x1, 0, 0, 1)
+#define MPP3_GE1_RXCLK        MPP(3, 0x2, 0, 0, 1)
 #define MPP3_UNUSED        MPP(3, 0x3, 0, 0, 1)
 
 #define MPP4_GPIO        MPP(4, 0x0, 1, 1, 1)
-#define MPP4_GE0_TXD4        MPP(4, 0x1, 0, 1, 1)
-#define MPP4_GE1_TXD0        MPP(4, 0x2, 0, 1, 1)
+#define MPP4_GE0_TXD4        MPP(4, 0x1, 0, 0, 1)
+#define MPP4_GE1_TXD0        MPP(4, 0x2, 0, 0, 1)
 #define MPP4_UNUSED        MPP(4, 0x3, 0, 0, 1)
 
 #define MPP5_GPIO        MPP(5, 0x0, 1, 1, 1)
-#define MPP5_GE0_TXD5        MPP(5, 0x1, 0, 1, 1)
-#define MPP5_GE1_TXD1        MPP(5, 0x2, 0, 1, 1)
+#define MPP5_GE0_TXD5        MPP(5, 0x1, 0, 0, 1)
+#define MPP5_GE1_TXD1        MPP(5, 0x2, 0, 0, 1)
 #define MPP5_UNUSED        MPP(5, 0x3, 0, 0, 1)
 
 #define MPP6_GPIO        MPP(6, 0x0, 1, 1, 1)
-#define MPP6_GE0_TXD6        MPP(6, 0x1, 0, 1, 1)
-#define MPP6_GE1_TXD2        MPP(6, 0x2, 0, 1, 1)
+#define MPP6_GE0_TXD6        MPP(6, 0x1, 0, 0, 1)
+#define MPP6_GE1_TXD2        MPP(6, 0x2, 0, 0, 1)
 #define MPP6_UNUSED        MPP(6, 0x3, 0, 0, 1)
 
 #define MPP7_GPIO        MPP(7, 0x0, 1, 1, 1)
-#define MPP7_GE0_TXD7        MPP(7, 0x1, 0, 1, 1)
-#define MPP7_GE1_TXD3        MPP(7, 0x2, 0, 1, 1)
+#define MPP7_GE0_TXD7        MPP(7, 0x1, 0, 0, 1)
+#define MPP7_GE1_TXD3        MPP(7, 0x2, 0, 0, 1)
 #define MPP7_UNUSED        MPP(7, 0x3, 0, 0, 1)
 
 #define MPP8_GPIO        MPP(8, 0x0, 1, 1, 1)
-#define MPP8_GE0_RXD4        MPP(8, 0x1, 1, 0, 1)
-#define MPP8_GE1_RXD0        MPP(8, 0x2, 1, 0, 1)
+#define MPP8_GE0_RXD4        MPP(8, 0x1, 0, 0, 1)
+#define MPP8_GE1_RXD0        MPP(8, 0x2, 0, 0, 1)
 #define MPP8_UNUSED        MPP(8, 0x3, 0, 0, 1)
 
 #define MPP9_GPIO        MPP(9, 0x0, 1, 1, 1)
-#define MPP9_GE0_RXD5        MPP(9, 0x1, 1, 0, 1)
-#define MPP9_GE1_RXD1        MPP(9, 0x2, 1, 0, 1)
+#define MPP9_GE0_RXD5        MPP(9, 0x1, 0, 0, 1)
+#define MPP9_GE1_RXD1        MPP(9, 0x2, 0, 0, 1)
 #define MPP9_UNUSED        MPP(9, 0x3, 0, 0, 1)
 
 #define MPP10_GPIO        MPP(10, 0x0, 1, 1, 1)
-#define MPP10_GE0_RXD6        MPP(10, 0x1, 1, 0, 1)
-#define MPP10_GE1_RXD2        MPP(10, 0x2, 1, 0, 1)
+#define MPP10_GE0_RXD6        MPP(10, 0x1, 0, 0, 1)
+#define MPP10_GE1_RXD2        MPP(10, 0x2, 0, 0, 1)
 #define MPP10_UNUSED        MPP(10, 0x3, 0, 0, 1)
 
 #define MPP11_GPIO        MPP(11, 0x0, 1, 1, 1)
-#define MPP11_GE0_RXD7        MPP(11, 0x1, 1, 0, 1)
-#define MPP11_GE1_RXD3        MPP(11, 0x2, 1, 0, 1)
+#define MPP11_GE0_RXD7        MPP(11, 0x1, 0, 0, 1)
+#define MPP11_GE1_RXD3        MPP(11, 0x2, 0, 0, 1)
 #define MPP11_UNUSED        MPP(11, 0x3, 0, 0, 1)
 
 #define MPP12_GPIO        MPP(12, 0x0, 1, 1, 1)
-#define MPP12_M_BB        MPP(12, 0x3, 1, 0, 1)
-#define MPP12_UA0_CTSn        MPP(12, 0x4, 1, 0, 1)
-#define MPP12_NAND_FLASH_REn0    MPP(12, 0x5, 0, 1, 1)
-#define MPP12_TDM0_SCSn        MPP(12, 0X6, 0, 1, 1)
+#define MPP12_M_BB        MPP(12, 0x3, 0, 0, 1)
+#define MPP12_UA0_CTSn        MPP(12, 0x4, 0, 0, 1)
+#define MPP12_NAND_FLASH_REn0    MPP(12, 0x5, 0, 0, 1)
+#define MPP12_TDM0_SCSn        MPP(12, 0X6, 0, 0, 1)
 #define MPP12_UNUSED        MPP(12, 0x1, 0, 0, 1)
 
 #define MPP13_GPIO        MPP(13, 0x0, 1, 1, 1)
-#define MPP13_SYSRST_OUTn    MPP(13, 0x3, 0, 1, 1)
-#define MPP13_UA0_RTSn        MPP(13, 0x4, 0, 1, 1)
-#define MPP13_NAN_FLASH_WEn0    MPP(13, 0x5, 0, 1, 1)
-#define MPP13_TDM_SCLK        MPP(13, 0x6, 0, 1, 1)
+#define MPP13_SYSRST_OUTn    MPP(13, 0x3, 0, 0, 1)
+#define MPP13_UA0_RTSn        MPP(13, 0x4, 0, 0, 1)
+#define MPP13_NAN_FLASH_WEn0    MPP(13, 0x5, 0, 0, 1)
+#define MPP13_TDM_SCLK        MPP(13, 0x6, 0, 0, 1)
 #define MPP13_UNUSED        MPP(13, 0x1, 0, 0, 1)
 
 #define MPP14_GPIO        MPP(14, 0x0, 1, 1, 1)
-#define MPP14_SATA1_ACTn    MPP(14, 0x3, 0, 1, 1)
-#define MPP14_UA1_CTSn        MPP(14, 0x4, 1, 0, 1)
-#define MPP14_NAND_FLASH_REn1    MPP(14, 0x5, 0, 1, 1)
-#define MPP14_TDM_SMOSI        MPP(14, 0x6, 0, 1, 1)
+#define MPP14_SATA1_ACTn    MPP(14, 0x3, 0, 0, 1)
+#define MPP14_UA1_CTSn        MPP(14, 0x4, 0, 0, 1)
+#define MPP14_NAND_FLASH_REn1    MPP(14, 0x5, 0, 0, 1)
+#define MPP14_TDM_SMOSI        MPP(14, 0x6, 0, 0, 1)
 #define MPP14_UNUSED        MPP(14, 0x1, 0, 0, 1)
 
 #define MPP15_GPIO        MPP(15, 0x0, 1, 1, 1)
-#define MPP15_SATA0_ACTn    MPP(15, 0x3, 0, 1, 1)
-#define MPP15_UA1_RTSn        MPP(15, 0x4, 0, 1, 1)
-#define MPP15_NAND_FLASH_WEn1    MPP(15, 0x5, 0, 1, 1)
-#define MPP15_TDM_SMISO        MPP(15, 0x6, 1, 0, 1)
+#define MPP15_SATA0_ACTn    MPP(15, 0x3, 0, 0, 1)
+#define MPP15_UA1_RTSn        MPP(15, 0x4, 0, 0, 1)
+#define MPP15_NAND_FLASH_WEn1    MPP(15, 0x5, 0, 0, 1)
+#define MPP15_TDM_SMISO        MPP(15, 0x6, 0, 0, 1)
 #define MPP15_UNUSED        MPP(15, 0x1, 0, 0, 1)
 
 #define MPP16_GPIO        MPP(16, 0x0, 1, 1, 1)
-#define MPP16_SATA1_PRESENTn    MPP(16, 0x3, 0, 1, 1)
-#define MPP16_UA2_TXD        MPP(16, 0x4, 0, 1, 1)
-#define MPP16_NAND_FLASH_REn3    MPP(16, 0x5, 0, 1, 1)
-#define MPP16_TDM_INTn        MPP(16, 0x6, 1, 0, 1)
+#define MPP16_SATA1_PRESENTn    MPP(16, 0x3, 0, 0, 1)
+#define MPP16_UA2_TXD        MPP(16, 0x4, 0, 0, 1)
+#define MPP16_NAND_FLASH_REn3    MPP(16, 0x5, 0, 0, 1)
+#define MPP16_TDM_INTn        MPP(16, 0x6, 0, 0, 1)
 #define MPP16_UNUSED        MPP(16, 0x1, 0, 0, 1)
 
 
 #define MPP17_GPIO        MPP(17, 0x0, 1, 1, 1)
-#define MPP17_SATA0_PRESENTn    MPP(17, 0x3, 0, 1, 1)
-#define MPP17_UA2_RXD        MPP(17, 0x4, 1, 0, 1)
-#define MPP17_NAND_FLASH_WEn3    MPP(17, 0x5, 0, 1, 1)
-#define MPP17_TDM_RSTn        MPP(17, 0x6, 0, 1, 1)
+#define MPP17_SATA0_PRESENTn    MPP(17, 0x3, 0, 0, 1)
+#define MPP17_UA2_RXD        MPP(17, 0x4, 0, 0, 1)
+#define MPP17_NAND_FLASH_WEn3    MPP(17, 0x5, 0, 0, 1)
+#define MPP17_TDM_RSTn        MPP(17, 0x6, 0, 0, 1)
 #define MPP17_UNUSED        MPP(17, 0x1, 0, 0, 1)
 
 
 #define MPP18_GPIO        MPP(18, 0x0, 1, 1, 1)
-#define MPP18_UA0_CTSn        MPP(18, 0x4, 1, 0, 1)
-#define MPP18_BOOT_FLASH_REn    MPP(18, 0x5, 0, 1, 1)
+#define MPP18_UA0_CTSn        MPP(18, 0x4, 0, 0, 1)
+#define MPP18_BOOT_FLASH_REn    MPP(18, 0x5, 0, 0, 1)
 #define MPP18_UNUSED        MPP(18, 0x1, 0, 0, 1)
 
 
 
 #define MPP19_GPIO        MPP(19, 0x0, 1, 1, 1)
-#define MPP19_UA0_CTSn        MPP(19, 0x4, 0, 1, 1)
-#define MPP19_BOOT_FLASH_WEn    MPP(19, 0x5, 0, 1, 1)
+#define MPP19_UA0_CTSn        MPP(19, 0x4, 0, 0, 1)
+#define MPP19_BOOT_FLASH_WEn    MPP(19, 0x5, 0, 0, 1)
 #define MPP19_UNUSED        MPP(19, 0x1, 0, 0, 1)
 
 
 #define MPP20_GPIO        MPP(20, 0x0, 1, 1, 1)
-#define MPP20_UA1_CTSs        MPP(20, 0x4, 1, 0, 1)
-#define MPP20_TDM_PCLK        MPP(20, 0x6, 1, 1, 0)
+#define MPP20_UA1_CTSs        MPP(20, 0x4, 0, 0, 1)
+#define MPP20_TDM_PCLK        MPP(20, 0x6, 0, 0, 0)
 #define MPP20_UNUSED        MPP(20, 0x1, 0, 0, 1)
 
 
 
 #define MPP21_GPIO        MPP(21, 0x0, 1, 1, 1)
-#define MPP21_UA1_CTSs        MPP(21, 0x4, 0, 1, 1)
-#define MPP21_TDM_FSYNC        MPP(21, 0x6, 1, 1, 0)
+#define MPP21_UA1_CTSs        MPP(21, 0x4, 0, 0, 1)
+#define MPP21_TDM_FSYNC        MPP(21, 0x6, 0, 0, 0)
 #define MPP21_UNUSED        MPP(21, 0x1, 0, 0, 1)
 
 
 
 #define MPP22_GPIO        MPP(22, 0x0, 1, 1, 1)
-#define MPP22_UA3_TDX        MPP(22, 0x4, 0, 1, 1)
-#define MPP22_NAND_FLASH_REn2    MPP(22, 0x5, 0, 1, 1)
-#define MPP22_TDM_DRX        MPP(22, 0x6, 1, 0, 1)
+#define MPP22_UA3_TDX        MPP(22, 0x4, 0, 0, 1)
+#define MPP22_NAND_FLASH_REn2    MPP(22, 0x5, 0, 0, 1)
+#define MPP22_TDM_DRX        MPP(22, 0x6, 0, 0, 1)
 #define MPP22_UNUSED        MPP(22, 0x1, 0, 0, 1)
 
 
 
 #define MPP23_GPIO        MPP(23, 0x0, 1, 1, 1)
-#define MPP23_UA3_RDX        MPP(23, 0x4, 1, 0, 1)
-#define MPP23_NAND_FLASH_WEn2    MPP(23, 0x5, 0, 1, 1)
-#define MPP23_TDM_DTX        MPP(23, 0x6, 0, 1, 1)
+#define MPP23_UA3_RDX        MPP(23, 0x4, 0, 0, 1)
+#define MPP23_NAND_FLASH_WEn2    MPP(23, 0x5, 0, 0, 1)
+#define MPP23_TDM_DTX        MPP(23, 0x6, 0, 0, 1)
 #define MPP23_UNUSED        MPP(23, 0x1, 0, 0, 1)
 
 
 #define MPP24_GPIO        MPP(24, 0x0, 1, 1, 1)
-#define MPP24_UA2_TXD        MPP(24, 0x4, 0, 1, 1)
-#define MPP24_TDM_INTn        MPP(24, 0x6, 1, 0, 1)
+#define MPP24_UA2_TXD        MPP(24, 0x4, 0, 0, 1)
+#define MPP24_TDM_INTn        MPP(24, 0x6, 0, 0, 1)
 #define MPP24_UNUSED        MPP(24, 0x1, 0, 0, 1)
 
 
 #define MPP25_GPIO        MPP(25, 0x0, 1, 1, 1)
-#define MPP25_UA2_RXD        MPP(25, 0x4, 1, 0, 1)
-#define MPP25_TDM_RSTn        MPP(25, 0x6, 0, 1, 1)
+#define MPP25_UA2_RXD        MPP(25, 0x4, 0, 0, 1)
+#define MPP25_TDM_RSTn        MPP(25, 0x6, 0, 0, 1)
 #define MPP25_UNUSED        MPP(25, 0x1, 0, 0, 1)
 
 
 #define MPP26_GPIO        MPP(26, 0x0, 1, 1, 1)
-#define MPP26_UA2_CTSn        MPP(26, 0x4, 1, 0, 1)
-#define MPP26_TDM_PCLK        MPP(26, 0x6, 1, 1, 1)
+#define MPP26_UA2_CTSn        MPP(26, 0x4, 0, 0, 1)
+#define MPP26_TDM_PCLK        MPP(26, 0x6, 0, 0, 1)
 #define MPP26_UNUSED        MPP(26, 0x1, 0, 0, 1)
 
 
 #define MPP27_GPIO        MPP(27, 0x0, 1, 1, 1)
-#define MPP27_UA2_RTSn        MPP(27, 0x4, 0, 1, 1)
-#define MPP27_TDM_FSYNC        MPP(27, 0x6, 1, 1, 1)
+#define MPP27_UA2_RTSn        MPP(27, 0x4, 0, 0, 1)
+#define MPP27_TDM_FSYNC        MPP(27, 0x6, 0, 0, 1)
 #define MPP27_UNUSED        MPP(27, 0x1, 0, 0, 1)
 
 
 #define MPP28_GPIO        MPP(28, 0x0, 1, 1, 1)
-#define MPP28_UA3_TXD        MPP(28, 0x4, 0, 1, 1)
-#define MPP28_TDM_DRX        MPP(28, 0x6, 1, 0, 1)
+#define MPP28_UA3_TXD        MPP(28, 0x4, 0, 0, 1)
+#define MPP28_TDM_DRX        MPP(28, 0x6, 0, 0, 1)
 #define MPP28_UNUSED        MPP(28, 0x1, 0, 0, 1)
 
 #define MPP29_GPIO        MPP(29, 0x0, 1, 1, 1)
-#define MPP29_UA3_RXD        MPP(29, 0x4, 1, 0, 1)
-#define MPP29_SYSRST_OUTn    MPP(29, 0x5, 0, 1, 1)
-#define MPP29_TDM_DTX        MPP(29, 0x6, 0, 1, 1)
+#define MPP29_UA3_RXD        MPP(29, 0x4, 0, 0, 1)
+#define MPP29_SYSRST_OUTn    MPP(29, 0x5, 0, 0, 1)
+#define MPP29_TDM_DTX        MPP(29, 0x6, 0, 0, 1)
 #define MPP29_UNUSED        MPP(29, 0x1, 0, 0, 1)
 
 #define MPP30_GPIO        MPP(30, 0x0, 1, 1, 1)
-#define MPP30_UA3_CTSn        MPP(30, 0x4, 1, 0, 1)
+#define MPP30_UA3_CTSn        MPP(30, 0x4, 0, 0, 1)
 #define MPP30_UNUSED        MPP(30, 0x1, 0, 0, 1)
 
 #define MPP31_GPIO        MPP(31, 0x0, 1, 1, 1)
-#define MPP31_UA3_RTSn        MPP(31, 0x4, 0, 1, 1)
-#define MPP31_TDM1_SCSn        MPP(31, 0x6, 0, 1, 1)
+#define MPP31_UA3_RTSn        MPP(31, 0x4, 0, 0, 1)
+#define MPP31_TDM1_SCSn        MPP(31, 0x6, 0, 0, 1)
 #define MPP31_UNUSED        MPP(31, 0x1, 0, 0, 1)
 
 
 #define MPP32_GPIO        MPP(32, 0x1, 1, 1, 1)
-#define MPP32_UA3_TDX        MPP(32, 0x4, 0, 1, 1)
-#define MPP32_SYSRST_OUTn    MPP(32, 0x5, 0, 1, 1)
-#define MPP32_TDM0_RXQ        MPP(32, 0x6, 0, 1, 1)
+#define MPP32_UA3_TDX        MPP(32, 0x4, 0, 0, 1)
+#define MPP32_SYSRST_OUTn    MPP(32, 0x5, 0, 0, 1)
+#define MPP32_TDM0_RXQ        MPP(32, 0x6, 0, 0, 1)
 #define MPP32_UNUSED        MPP(32, 0x3, 0, 0, 1)
 
 
 #define MPP33_GPIO        MPP(33, 0x1, 1, 1, 1)
-#define MPP33_UA3_RDX        MPP(33, 0x4, 1, 0, 1)
-#define MPP33_TDM0_TXQ        MPP(33, 0x6, 0, 1, 1)
+#define MPP33_UA3_RDX        MPP(33, 0x4, 0, 0, 1)
+#define MPP33_TDM0_TXQ        MPP(33, 0x6, 0, 0, 1)
 #define MPP33_UNUSED        MPP(33, 0x3, 0, 0, 1)
 
 
 
 #define MPP34_GPIO        MPP(34, 0x1, 1, 1, 1)
-#define MPP34_UA2_TDX        MPP(34, 0x4, 0, 1, 1)
-#define MPP34_TDM1_RXQ        MPP(34, 0x6, 0, 1, 1)
+#define MPP34_UA2_TDX        MPP(34, 0x4, 0, 0, 1)
+#define MPP34_TDM1_RXQ        MPP(34, 0x6, 0, 0, 1)
 #define MPP34_UNUSED        MPP(34, 0x3, 0, 0, 1)
 
 
 
 #define MPP35_GPIO        MPP(35, 0x1, 1, 1, 1)
-#define MPP35_UA2_RDX        MPP(35, 0x4, 1, 0, 1)
-#define MPP35_TDM1_TXQ        MPP(35, 0x6, 0, 1, 1)
+#define MPP35_UA2_RDX        MPP(35, 0x4, 0, 0, 1)
+#define MPP35_TDM1_TXQ        MPP(35, 0x6, 0, 0, 1)
 #define MPP35_UNUSED        MPP(35, 0x3, 0, 0, 1)
 
 #define MPP36_GPIO        MPP(36, 0x1, 1, 1, 1)
-#define MPP36_UA0_CTSn        MPP(36, 0x2, 1, 0, 1)
-#define MPP36_UA2_TDX        MPP(36, 0x4, 0, 1, 1)
-#define MPP36_TDM0_SCSn        MPP(36, 0x6, 0, 1, 1)
+#define MPP36_UA0_CTSn        MPP(36, 0x2, 0, 0, 1)
+#define MPP36_UA2_TDX        MPP(36, 0x4, 0, 0, 1)
+#define MPP36_TDM0_SCSn        MPP(36, 0x6, 0, 0, 1)
 #define MPP36_UNUSED        MPP(36, 0x3, 0, 0, 1)
 
 
 #define MPP37_GPIO        MPP(37, 0x1, 1, 1, 1)
-#define MPP37_UA0_RTSn        MPP(37, 0x2, 0, 1, 1)
-#define MPP37_UA2_RXD        MPP(37, 0x4, 1, 0, 1)
-#define MPP37_SYSRST_OUTn    MPP(37, 0x5, 0, 1, 1)
-#define MPP37_TDM_SCLK        MPP(37, 0x6, 0, 1, 1)
+#define MPP37_UA0_RTSn        MPP(37, 0x2, 0, 0, 1)
+#define MPP37_UA2_RXD        MPP(37, 0x4, 0, 0, 1)
+#define MPP37_SYSRST_OUTn    MPP(37, 0x5, 0, 0, 1)
+#define MPP37_TDM_SCLK        MPP(37, 0x6, 0, 0, 1)
 #define MPP37_UNUSED        MPP(37, 0x3, 0, 0, 1)
 
 
 
 
 #define MPP38_GPIO        MPP(38, 0x1, 1, 1, 1)
-#define MPP38_UA1_CTSn        MPP(38, 0x2, 1, 0, 1)
-#define MPP38_UA3_TXD        MPP(38, 0x4, 0, 1, 1)
-#define MPP38_SYSRST_OUTn    MPP(38, 0x5, 0, 1, 1)
-#define MPP38_TDM_SMOSI        MPP(38, 0x6, 0, 1, 1)
+#define MPP38_UA1_CTSn        MPP(38, 0x2, 0, 0, 1)
+#define MPP38_UA3_TXD        MPP(38, 0x4, 0, 0, 1)
+#define MPP38_SYSRST_OUTn    MPP(38, 0x5, 0, 0, 1)
+#define MPP38_TDM_SMOSI        MPP(38, 0x6, 0, 0, 1)
 #define MPP38_UNUSED        MPP(38, 0x3, 0, 0, 1)
 
 
 
 
 #define MPP39_GPIO        MPP(39, 0x1, 1, 1, 1)
-#define MPP39_UA1_RTSn        MPP(39, 0x2, 0, 1, 1)
-#define MPP39_UA3_RXD        MPP(39, 0x4, 1, 0, 1)
-#define MPP39_SYSRST_OUTn    MPP(39, 0x5, 0, 1, 1)
-#define MPP39_TDM_SMISO        MPP(39, 0x6, 1, 0, 1)
+#define MPP39_UA1_RTSn        MPP(39, 0x2, 0, 0, 1)
+#define MPP39_UA3_RXD        MPP(39, 0x4, 0, 0, 1)
+#define MPP39_SYSRST_OUTn    MPP(39, 0x5, 0, 0, 1)
+#define MPP39_TDM_SMISO        MPP(39, 0x6, 0, 0, 1)
 #define MPP39_UNUSED        MPP(39, 0x3, 0, 0, 1)
 
 
 
 #define MPP40_GPIO        MPP(40, 0x1, 1, 1, 1)
-#define MPP40_TDM_INTn        MPP(40, 0x6, 1, 0, 1)
+#define MPP40_TDM_INTn        MPP(40, 0x6, 0, 0, 1)
 #define MPP40_UNUSED        MPP(40, 0x0, 0, 0, 1)
 
 
 
 #define MPP41_GPIO        MPP(41, 0x1, 1, 1, 1)
-#define MPP41_TDM_RSTn        MPP(41, 0x6, 0, 1, 1)
+#define MPP41_TDM_RSTn        MPP(41, 0x6, 0, 0, 1)
 #define MPP41_UNUSED        MPP(41, 0x0, 0, 0, 1)
 
 
 
 #define MPP42_GPIO        MPP(42, 0x1, 1, 1, 1)
-#define MPP42_TDM_PCLK        MPP(42, 0x6, 1, 1, 1)
+#define MPP42_TDM_PCLK        MPP(42, 0x6, 0, 0, 1)
 #define MPP42_UNUSED        MPP(42, 0x0, 0, 0, 1)
 
 
 
 #define MPP43_GPIO        MPP(43, 0x1, 1, 1, 1)
-#define MPP43_TDM_FSYNC        MPP(43, 0x6, 1, 1, 1)
+#define MPP43_TDM_FSYNC        MPP(43, 0x6, 0, 0, 1)
 #define MPP43_UNUSED        MPP(43, 0x0, 0, 0, 1)
 
 
 
 #define MPP44_GPIO        MPP(44, 0x1, 1, 1, 1)
-#define MPP44_TDM_DRX        MPP(44, 0x6, 1, 0, 1)
+#define MPP44_TDM_DRX        MPP(44, 0x6, 0, 0, 1)
 #define MPP44_UNUSED        MPP(44, 0x0, 0, 0, 1)
 
 
 
 #define MPP45_GPIO        MPP(45, 0x1, 1, 1, 1)
-#define MPP45_SATA0_ACTn    MPP(45, 0x3, 0, 1, 1)
-#define MPP45_TDM_DRX        MPP(45, 0x6, 0, 1, 1)
+#define MPP45_SATA0_ACTn    MPP(45, 0x3, 0, 0, 1)
+#define MPP45_TDM_DRX        MPP(45, 0x6, 0, 0, 1)
 #define MPP45_UNUSED        MPP(45, 0x0, 0, 0, 1)
 
 
 #define MPP46_GPIO        MPP(46, 0x1, 1, 1, 1)
-#define MPP46_TDM_SCSn        MPP(46, 0x6, 0, 1, 1)
+#define MPP46_TDM_SCSn        MPP(46, 0x6, 0, 0, 1)
 #define MPP46_UNUSED        MPP(46, 0x0, 0, 0, 1)
 
 
@@ -323,14 +323,14 @@
 
 
 #define MPP48_GPIO        MPP(48, 0x1, 1, 1, 1)
-#define MPP48_SATA1_ACTn    MPP(48, 0x3, 0, 1, 1)
+#define MPP48_SATA1_ACTn    MPP(48, 0x3, 0, 0, 1)
 #define MPP48_UNUSED        MPP(48, 0x2, 0, 0, 1)
 
 
 
 #define MPP49_GPIO        MPP(49, 0x1, 1, 1, 1)
-#define MPP49_SATA0_ACTn    MPP(49, 0x3, 0, 1, 1)
-#define MPP49_M_BB        MPP(49, 0x4, 1, 0, 1)
+#define MPP49_SATA0_ACTn    MPP(49, 0x3, 0, 0, 1)
+#define MPP49_M_BB        MPP(49, 0x4, 0, 0, 1)
 #define MPP49_UNUSED        MPP(49, 0x2, 0, 0, 1)
 
 

arch/arm/mach-omap1/board-innovator.c

@@ -416,13 +416,13 @@ static void __init innovator_init(void)
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		omap1_usb_init(&innovator1510_usb_config);
-		innovator_config[1].data = &innovator1510_lcd_config;
+		innovator_config[0].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
 		omap1_usb_init(&h2_usb_config);
-		innovator_config[1].data = &innovator1610_lcd_config;
+		innovator_config[0].data = &innovator1610_lcd_config;
 	}
 #endif
 	omap_board_config = innovator_config;

arch/arm/mach-omap2/Kconfig

@@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING
 	  going on could result in system crashes;
 
 config OMAP4_ERRATA_I688
-	bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
-	depends on ARCH_OMAP4 && BROKEN
+	bool "OMAP4 errata: Async Bridge Corruption"
+	depends on ARCH_OMAP4
 	select ARCH_HAS_BARRIERS
 	help
 	  If a data is stalled inside asynchronous bridge because of back

arch/arm/mach-omap2/Makefile

@@ -11,9 +11,9 @@ hwmod-common				= omap_hwmod.o \
 					  omap_hwmod_common_data.o
 clock-common				= clock.o clock_common_data.o \
 					  clkt_dpll.o clkt_clksel.o
-secure-common                          = omap-smc.o omap-secure.o
+secure-common				= omap-smc.o omap-secure.o
 
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
 

arch/arm/mach-omap2/board-cm-t35.c

@@ -437,7 +437,7 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
-static void cm_t35_init_usbh(void)
+static void  __init cm_t35_init_usbh(void)
 {
 	int err;
 

arch/arm/mach-omap2/board-generic.c

@@ -17,6 +17,7 @@
 #include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 
 #include <plat/board.h>
@@ -102,6 +103,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
 	.dt_compat	= omap242x_boards_compat,
@@ -141,6 +143,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_init,
 	.timer		= &omap3_timer,
 	.dt_compat	= omap3_boards_compat,
@@ -160,6 +163,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap4_init,
 	.timer		= &omap4_timer,
 	.dt_compat	= omap4_boards_compat,

arch/arm/mach-omap2/board-n8x0.c

@@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
+#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
+#else
+	pr_warn("MMC: notify cover event not available\n");
+#endif
 }
 
 static int n8x0_mmc_late_init(struct device *dev)

arch/arm/mach-omap2/board-omap3evm.c

@@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
 
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
 	platform_device_register(&leds_gpio);
 

arch/arm/mach-omap2/common.h

@@ -132,6 +132,7 @@ void omap3_map_io(void);
 void am33xx_map_io(void);
 void omap4_map_io(void);
 void ti81xx_map_io(void);
+void omap_barriers_init(void);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition

arch/arm/mach-omap2/cpuidle44xx.c

@@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	struct timespec ts_preidle, ts_postidle, ts_idle;
 	u32 cpu1_state;
 	int idle_time;
-	int new_state_idx;
 	int cpu_id = smp_processor_id();
 
 	/* Used to keep track of the total time in idle */
@@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	 */
 	cpu1_state = pwrdm_read_pwrst(cpu1_pd);
 	if (cpu1_state != PWRDM_POWER_OFF) {
-		new_state_idx = drv->safe_state_index;
-		cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+		index = drv->safe_state_index;
+		cx = cpuidle_get_statedata(&dev->states_usage[index]);
 	}
 
 	if (index > 0)

arch/arm/mach-omap2/gpmc-smsc911x.c

@@ -19,6 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <plat/board.h>
 #include <plat/gpmc.h>
@@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
 	.flags		= SMSC911X_USE_16BIT,
 };
 
+static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+/* Generic regulator definition to satisfy smsc911x */
+static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(gpmc_smsc911x_supply),
+	.consumer_supplies	= gpmc_smsc911x_supply,
+};
+
+static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
+	.supply_name		= "gpmc_smsc911x",
+	.microvolts		= 3300000,
+	.gpio			= -EINVAL,
+	.startup_delay		= 0,
+	.enable_high		= 0,
+	.enabled_at_boot	= 1,
+	.init_data		= &gpmc_smsc911x_reg_init_data,
+};
+
+/*
+ * Platform device id of 42 is a temporary fix to avoid conflicts
+ * with other reg-fixed-voltage devices. The real fix should
+ * involve the driver core providing a way of dynamically
+ * assigning a unique id on registration for platform devices
+ * in the same name space.
+ */
+static struct platform_device gpmc_smsc911x_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= 42,
+	.dev = {
+		.platform_data	= &gpmc_smsc911x_fixed_reg_data,
+	},
+};
+
 /*
  * Initialize smsc911x device connected to the GPMC. Note that we
  * assume that pin multiplexing is done in the board-*.c file,
@@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 
 	gpmc_cfg = board_data;
 
+	ret = platform_device_register(&gpmc_smsc911x_regulator);
+	if (ret < 0) {
+		pr_err("Unable to register smsc911x regulators: %d\n", ret);
+		return;
+	}
+
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
 		pr_err("Failed to request GPMC mem region\n");
 		return;

arch/arm/mach-omap2/hsmmc.c

@@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	return 0;
 }
 
+static int omap_hsmmc_done;
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
@@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	u32 reg;
 
+	if (omap_hsmmc_done)
+		return;
+
+	omap_hsmmc_done = 1;
+
 	if (!cpu_is_omap44xx()) {
 		if (cpu_is_omap2430()) {
 			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;

arch/arm/mach-omap2/id.c

@@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
 	case 0xb944:
 		omap_revision = AM335X_REV_ES1_0;
 		*cpu_rev = "1.0";
+		break;
 	case 0xb8f2:
 		switch (rev) {
 		case 0:

arch/arm/mach-omap2/io.c

@@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void)
 void __init omap44xx_map_common_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 

arch/arm/mach-omap2/mailbox.c

@@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_iva_priv,
 };
+#endif
 
-struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
+#ifdef CONFIG_ARCH_OMAP2
+struct omap_mbox *omap2_mboxes[] = {
+	&mbox_dsp_info,
+#ifdef CONFIG_SOC_OMAP2420
+	&mbox_iva_info,
+#endif
+	NULL
+};
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4)

arch/arm/mach-omap2/mux.c

@@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
 	return -ENODEV;
 }
 
-static int __init
+static int
 omap_mux_get_by_name(const char *muxname,
 			struct omap_mux_partition **found_partition,
 			struct omap_mux **found_mux)

arch/arm/mach-omap2/omap-iommu.c

@@ -150,7 +150,8 @@ err_out:
 		platform_device_put(omap_iommu_pdev[i]);
 	return err;
 }
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
 
 static void __exit omap_iommu_exit(void)
 {

arch/arm/mach-omap2/omap4-common.c

@@ -24,12 +24,14 @@
 
 #include <plat/irqs.h>
 #include <plat/sram.h>
+#include <plat/omap-secure.h>
 
 #include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
 
 #include "common.h"
 #include "omap4-sar-layout.h"
+#include <linux/export.h>
 
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
@@ -43,6 +45,9 @@ static void __iomem *sar_ram_base;
 
 void __iomem *dram_sync, *sram_sync;
 
+static phys_addr_t paddr;
+static u32 size;
+
 void omap_bus_sync(void)
 {
 	if (dram_sync && sram_sync) {
@@ -51,19 +56,22 @@ void omap_bus_sync(void)
 		isb();
 	}
 }
+EXPORT_SYMBOL(omap_bus_sync);
 
-static int __init omap_barriers_init(void)
+/* Steal one page physical memory for barrier implementation */
+int __init omap_barrier_reserve_memblock(void)
 {
-	struct map_desc dram_io_desc[1];
-	phys_addr_t paddr;
-	u32 size;
-
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
 
 	size = ALIGN(PAGE_SIZE, SZ_1M);
 	paddr = arm_memblock_steal(size, SZ_1M);
 
+	return 0;
+}
+
+void __init omap_barriers_init(void)
+{
+	struct map_desc dram_io_desc[1];
+
 	dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
 	dram_io_desc[0].pfn = __phys_to_pfn(paddr);
 	dram_io_desc[0].length = size;
@@ -75,9 +83,10 @@ static int __init omap_barriers_init(void)
 	pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
 		(long long) paddr, dram_io_desc[0].virtual);
 
-	return 0;
 }
-core_initcall(omap_barriers_init);
+#else
+void __init omap_barriers_init(void)
+{}
 #endif
 
 void __init gic_init_irq(void)

arch/arm/mach-omap2/pm.c

@@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	freq = clk->rate;
 	clk_put(clk);
 
+	rcu_read_lock();
 	opp = opp_find_freq_ceil(dev, &freq);
 	if (IS_ERR(opp)) {
+		rcu_read_unlock();
 		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
 			__func__, vdd_name);
 		goto exit;
 	}
 
 	bootup_volt = opp_get_voltage(opp);
+	rcu_read_unlock();
 	if (!bootup_volt) {
 		pr_err("%s: unable to find voltage corresponding "
 			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);

arch/arm/mach-omap2/pm24xx.c

@@ -82,13 +82,7 @@ static int omap2_fclks_active(void)
 	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
 	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
 
-	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
-	f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK);
-	f2 &= ~OMAP24XX_EN_UART3_MASK;
-
-	if (f1 | f2)
-		return 1;
-	return 0;
+	return (f1 | f2) ? 1 : 0;
 }
 
 static void omap2_enter_full_retention(void)

arch/arm/mach-omap2/twl-common.c

@@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
 	.constraints = {
 		.min_uV			= 3300000,
 		.max_uV			= 3300000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE

arch/arm/mach-omap2/usb-host.c

@@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
 	struct omap_hwmod	*oh[2];
-	struct omap_device	*od;
+	struct platform_device	*pdev;
 	int			bus_id = -1;
 	int			i;
 
@@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 		return;
 	}
 
-	od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+	pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
 				(void *)&usbhs_data, sizeof(usbhs_data),
 				omap_uhhtll_latency,
 				ARRAY_SIZE(omap_uhhtll_latency), false);
-	if (IS_ERR(od)) {
+	if (IS_ERR(pdev)) {
 		pr_err("Could not build hwmod devices %s,%s\n",
 			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
 		return;

arch/arm/mach-omap2/voltagedomains3xxx_data.c

@@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	if (cpu_is_omap3630()) {
 		omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
@@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void)
 		omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
 	}
+#endif
 
 	if (cpu_is_omap3517() || cpu_is_omap3505())
 		voltdms = voltagedomains_am35xx;

arch/arm/mach-omap2/voltagedomains44xx_data.c

@@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
 	omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
 	omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
+#endif
 
 	for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
 		voltdm->sys_clk.name = sys_clk_name;

arch/arm/mach-orion5x/common.c

@@ -29,6 +29,7 @@
 #include <mach/hardware.h>
 #include <mach/orion5x.h>
 #include <plat/orion_nand.h>
+#include <plat/ehci-orion.h>
 #include <plat/time.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
@@ -72,7 +73,8 @@ void __init orion5x_map_io(void)
  ****************************************************************************/
 void __init orion5x_ehci0_init(void)
 {
-	orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL);
+	orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL,
+			EHCI_PHY_ORION);
 }
 
 

arch/arm/mach-pxa/generic.h

@@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
 #endif
 
 extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa_gpio_syscore_ops;
 extern struct syscore_ops pxa2xx_mfp_syscore_ops;
 extern struct syscore_ops pxa3xx_mfp_syscore_ops;
 

arch/arm/mach-pxa/hx4700.c

@@ -45,6 +45,7 @@
 #include <mach/hx4700.h>
 #include <mach/irda.h>
 
+#include <sound/ak4641.h>
 #include <video/platform_lcd.h>
 #include <video/w100fb.h>
 
@@ -764,6 +765,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = {
 	},
 };
 
+/*
+ * Asahi Kasei AK4641 on I2C
+ */
+
+static struct ak4641_platform_data ak4641_info = {
+	.gpio_power = GPIO27_HX4700_CODEC_ON,
+	.gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("ak4641", 0x12),
+		.platform_data = &ak4641_info,
+	},
+};
+
+static struct platform_device audio = {
+	.name	= "hx4700-audio",
+	.id	= -1,
+};
+
+
 /*
  * PCMCIA
  */
@@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = {
 	&gpio_vbus,
 	&power_supply,
 	&strataflash,
+	&audio,
 	&pcmcia,
 };
 
@@ -827,6 +851,7 @@ static void __init hx4700_init(void)
 	pxa_set_ficp_info(&ficp_info);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
 	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void)
 {
 	int i;
 
+	/* running before pxa_gpio_probe() */
+#ifdef CONFIG_CPU_PXA26x
+	pxa_last_gpio = 89;
+#else
+	pxa_last_gpio = 84;
+#endif
 	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
@@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void)
 {
 	int i, gpio;
 
+	pxa_last_gpio = 120;	/* running before pxa_gpio_probe() */
 	for (i = 0; i <= pxa_last_gpio; i++) {
 		/* skip GPIO2, 5, 6, 7, 8, they are not
 		 * valid pins allow configuration

arch/arm/mach-pxa/pxa25x.c

@@ -25,7 +25,6 @@
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
@@ -209,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =
@@ -368,7 +368,6 @@ static int __init pxa25x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(pxa25x_devices,

arch/arm/mach-pxa/pxa27x.c

@@ -22,7 +22,6 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
@@ -230,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -456,7 +456,6 @@ static int __init pxa27x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/pxa3xx.c

@@ -462,7 +462,6 @@ static int __init pxa3xx_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/pxa95x.c

@@ -283,7 +283,6 @@ static int __init pxa95x_init(void)
 			return ret;
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/saarb.c

@@ -15,7 +15,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/mfd/88pm860x.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-pxa/sharpsl_pm.c

@@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = {
 #define MAXCTRL_SEL_SH   4
 #define MAXCTRL_STR      (1u << 7)
 
+extern int max1111_read_channel(int);
 /*
  * Read MAX1111 ADC
  */
@@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 	if (machine_is_tosa())
 	    return 0;
 
-	extern int max1111_read_channel(int);
-
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */

arch/arm/mach-pxa/spitz_pm.c

@@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
 static unsigned long spitz_charger_wakeup(void)
 {
 	unsigned long ret;
-	ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
+	ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
 		<< GPIO_bit(SPITZ_GPIO_KEY_INT))
-		| (!gpio_get_value(SPITZ_GPIO_SYNC)
-		<< GPIO_bit(SPITZ_GPIO_SYNC));
+		| gpio_get_value(SPITZ_GPIO_SYNC));
 	return ret;
 }
 

arch/arm/mach-s3c2410/cpu-freq.c

@@ -115,7 +115,8 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
 	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
-static int s3c2410_cpufreq_add(struct device *dev)
+static int s3c2410_cpufreq_add(struct device *dev,
+			       struct subsys_interface *sif)
 {
 	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
 }
@@ -133,7 +134,8 @@ static int __init s3c2410_cpufreq_init(void)
 
 arch_initcall(s3c2410_cpufreq_init);
 
-static int s3c2410a_cpufreq_add(struct device *dev)
+static int s3c2410a_cpufreq_add(struct device *dev,
+				struct subsys_interface *sif)
 {
 	/* alter the maximum freq settings for S3C2410A. If a board knows
 	 * it only has a maximum of 200, then it should register its own
@@ -144,7 +146,7 @@ static int s3c2410a_cpufreq_add(struct device *dev)
 	s3c2410_cpufreq_info.max.pclk =  66500000;
 	s3c2410_cpufreq_info.name = "s3c2410a";
 
-	return s3c2410_cpufreq_add(dev);
+	return s3c2410_cpufreq_add(dev, sif);
 }
 
 static struct subsys_interface s3c2410a_cpufreq_interface = {

arch/arm/mach-s3c2410/dma.c

@@ -132,7 +132,8 @@ static struct s3c24xx_dma_order __initdata s3c2410_dma_order = {
 	},
 };
 
-static int __init s3c2410_dma_add(struct device *dev)
+static int __init s3c2410_dma_add(struct device *dev,
+				  struct subsys_interface *sif)
 {
 	s3c2410_dma_init();
 	s3c24xx_dma_order_set(&s3c2410_dma_order);
@@ -148,7 +149,7 @@ static struct subsys_interface s3c2410_dma_interface = {
 
 static int __init s3c2410_dma_drvinit(void)
 {
-	return subsys_interface_register(&s3c2410_interface);
+	return subsys_interface_register(&s3c2410_dma_interface);
 }
 
 arch_initcall(s3c2410_dma_drvinit);

arch/arm/mach-s3c2410/pll.c

@@ -66,7 +66,7 @@ static struct cpufreq_frequency_table pll_vals_12MHz[] = {
     { .frequency = 270000000, .index = PLLVAL(127, 1, 1),  },
 };
 
-static int s3c2410_plls_add(struct device *dev)
+static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
 {
 	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
 }

arch/arm/mach-s3c2410/pm.c

@@ -111,7 +111,7 @@ struct syscore_ops s3c2410_pm_syscore_ops = {
 	.resume		= s3c2410_pm_resume,
 };
 
-static int s3c2410_pm_add(struct device *dev)
+static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
 {
 	pm_cpu_prep = s3c2410_pm_prepare;
 	pm_cpu_sleep = s3c2410_cpu_suspend;

arch/arm/mach-s3c2412/cpu-freq.c

@@ -194,7 +194,8 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
 	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
 };
 
-static int s3c2412_cpufreq_add(struct device *dev)
+static int s3c2412_cpufreq_add(struct device *dev,
+			       struct subsys_interface *sif)
 {
 	unsigned long fclk_rate;
 

arch/arm/mach-s3c2412/dma.c

@@ -159,7 +159,8 @@ static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
 	.map_size	= ARRAY_SIZE(s3c2412_dma_mappings),
 };
 
-static int __init s3c2412_dma_add(struct device *dev)
+static int __init s3c2412_dma_add(struct device *dev,
+				  struct subsys_interface *sif)
 {
 	s3c2410_dma_init();
 	return s3c24xx_dma_init_map(&s3c2412_dma_sel);

arch/arm/mach-s3c2412/irq.c

@@ -170,7 +170,7 @@ static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state)
 
 static struct irq_chip s3c2412_irq_rtc_chip;
 
-static int s3c2412_irq_add(struct device *dev)
+static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
 {
 	unsigned int irqno;
 

arch/arm/mach-s3c2412/pm.c

@@ -56,7 +56,7 @@ static void s3c2412_pm_prepare(void)
 {
 }
 
-static int s3c2412_pm_add(struct device *dev)
+static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
 {
 	pm_cpu_prep = s3c2412_pm_prepare;
 	pm_cpu_sleep = s3c2412_cpu_suspend;

arch/arm/mach-s3c2416/irq.c

@@ -213,7 +213,8 @@ static int __init s3c2416_add_sub(unsigned int base,
 	return 0;
 }
 
-static int __init s3c2416_irq_add(struct device *dev)
+static int __init s3c2416_irq_add(struct device *dev,
+				  struct subsys_interface *sif)
 {
 	printk(KERN_INFO "S3C2416: IRQ Support\n");
 

arch/arm/mach-s3c2416/pm.c

@@ -48,7 +48,7 @@ static void s3c2416_pm_prepare(void)
 	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
 }
 
-static int s3c2416_pm_add(struct device *dev)
+static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif)
 {
 	pm_cpu_prep = s3c2416_pm_prepare;
 	pm_cpu_sleep = s3c2416_cpu_suspend;

arch/arm/mach-s3c2440/clock.c

@@ -149,7 +149,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
 };
 
-static int s3c2440_clk_add(struct device *dev)
+static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
 {
 	struct clk *clock_upll;
 	struct clk *clock_h;

arch/arm/mach-s3c2440/common.h

@@ -12,6 +12,6 @@
 #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
 #define __ARCH_ARM_MACH_S3C2440_COMMON_H
 
-void s3c2440_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
 
 #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */

arch/arm/mach-s3c2440/dma.c

@@ -174,7 +174,8 @@ static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
 	},
 };
 
-static int __init s3c2440_dma_add(struct device *dev)
+static int __init s3c2440_dma_add(struct device *dev,
+				  struct subsys_interface *sif)
 {
 	s3c2410_dma_init();
 	s3c24xx_dma_order_set(&s3c2440_dma_order);