drm/i915/dsi: Group DPOunit clock gate workaround with PLL enable

Move the DPOunit clock gate workaround to directly after the PLL enable.

The exact location of the workaround does not matter and there are 2
reasons to group it with the PLL enable:

1) This moves it out of the middle of the init sequence from the spec,
   making it easier to follow the init sequence / compare it to the spec

2) It is grouped with the pll disable call in intel_dsi_post_disable,
   so for consistency it should be grouped with the pll enable in
   intel_dsi_pre_enable

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-5-git-send-email-jani.nikula@intel.com

drivers/gpu/drm/i915/intel_dsi.c

@@ -791,14 +791,6 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
 		I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, 0);
 	}
 
-	intel_dsi_prepare(encoder, pipe_config);
-
-	/* Power on, try both CRC pmic gpio and VBT */
-	if (intel_dsi->gpio_panel)
-		gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
-	intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_POWER_ON);
-	msleep(intel_dsi->panel_on_delay);
-
 	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 		u32 val;
 
@@ -808,6 +800,14 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
 		I915_WRITE(DSPCLK_GATE_D, val);
 	}
 
+	intel_dsi_prepare(encoder, pipe_config);
+
+	/* Power on, try both CRC pmic gpio and VBT */
+	if (intel_dsi->gpio_panel)
+		gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
+	intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_POWER_ON);
+	msleep(intel_dsi->panel_on_delay);
+
 	/* put device in ready state */
 	intel_dsi_device_ready(encoder);