Input: cyapa - introduce device tree binding

Add device tree support for  Cypress trackpad devices.

Signed-off-by: Dudley Du <dudl@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Documentation/devicetree/bindings/input/cypress,cyapa.txt

@@ -0,0 +1,44 @@
+Cypress I2C Touchpad
+
+Required properties:
+- compatible: must be "cypress,cyapa".
+- reg: I2C address of the chip.
+- interrupt-parent: a phandle for the interrupt controller (see interrupt
+	binding[0]).
+- interrupts: interrupt to which the chip is connected (see interrupt
+	binding[0]).
+
+Optional properties:
+- wakeup-source: touchpad can be used as a wakeup source.
+- pinctrl-names: should be "default" (see pinctrl binding [1]).
+- pinctrl-0: a phandle pointing to the pin settings for the device (see
+	pinctrl binding [1]).
+- vcc-supply: a phandle for the regulator supplying 3.3V power.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+	&i2c0 {
+		/* ... */
+
+		/* Cypress Gen3 touchpad */
+		touchpad@67 {
+			compatible = "cypress,cyapa";
+			reg = <0x24>;
+			interrupt-parent = <&gpio>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
+			wakeup-source;
+		};
+
+		/* Cypress Gen5 and later touchpad */
+		touchpad@24 {
+			compatible = "cypress,cyapa";
+			reg = <0x24>;
+			interrupt-parent = <&gpio>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
+			wakeup-source;
+		};
+
+		/* ... */
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -54,6 +54,7 @@ cortina	Cortina Systems, Inc.
 cosmic	Cosmic Circuits
 crystalfontz	Crystalfontz America, Inc.
 cubietech	Cubietech, Ltd.
+cypress	Cypress Semiconductor Corporation
 dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
 davicom	DAVICOM Semiconductor, Inc.
 delta	Delta Electronics, Inc.

drivers/input/mouse/cyapa.c

@@ -26,6 +26,7 @@
 #include <linux/uaccess.h>
 #include <linux/pm_runtime.h>
 #include <linux/acpi.h>
+#include <linux/of.h>
 #include "cyapa.h"
 
 
@@ -1487,11 +1488,20 @@ static const struct acpi_device_id cyapa_acpi_id[] = {
 MODULE_DEVICE_TABLE(acpi, cyapa_acpi_id);
 #endif
 
+#ifdef CONFIG_OF
+static const struct of_device_id cyapa_of_match[] = {
+	{ .compatible = "cypress,cyapa" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cyapa_of_match);
+#endif
+
 static struct i2c_driver cyapa_driver = {
 	.driver = {
 		.name = "cyapa",
 		.pm = &cyapa_pm_ops,
 		.acpi_match_table = ACPI_PTR(cyapa_acpi_id),
+		.of_match_table = of_match_ptr(cyapa_of_match),
 	},
 
 	.probe = cyapa_probe,