[PATCH] serial: MRi MRI-PCIDS1 dual port serial card

Add support for the MRi PCIDS1 dual port serial card.  This card is a
little controversial since it is the subject of a PCI vendor/device ID
clash.  (See
http://www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).  I have
for now just used the hex ID 0x950a.  The divisor was part calculated part
iterated, so may not be exactly correct (but works for me at all settings
between 300 - 115300 bps).

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/serial/8250_pci.c

@@ -1029,6 +1029,8 @@ enum pci_board_num_t {
 	pbn_b0_2_921600,
 	pbn_b0_4_921600,
 
+	pbn_b0_2_1130000,
+
 	pbn_b0_4_1152000,
 
 	pbn_b0_bt_1_115200,
@@ -1163,6 +1165,14 @@ static struct pci_board pci_boards[] __devinitdata = {
 		.base_baud	= 921600,
 		.uart_offset	= 8,
 	},
+
+	[pbn_b0_2_1130000] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 2,
+		.base_baud      = 1130000,
+		.uart_offset    = 8,
+	},
+
 	[pbn_b0_4_1152000] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 4,
@@ -1988,6 +1998,16 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
 		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0,
 		pbn_b0_4_1152000 },
+
+		/*
+		 * The below card is a little controversial since it is the
+		 * subject of a PCI vendor/device ID clash.  (See
+		 * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
+		 * For now just used the hex ID 0x950a.
+		 */
+	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_2_1130000 },
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_4_115200 },