Merge tag 'at91-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/cleanup

Merge "First batch of cleanup for 4.2" from Alexandre Belloni:

 - use syscon in the ata and cf drivers to configure the SMC and drop
 sam9_smc.c
 - switch the at91rm9200 memory controller to syscon
 - remove last useless headers
 - remove now useless Makefile.boot

* tag 'at91-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: at91: remove useless Makefile.boot
  ARM: at91: remove at91rm9200_sdramc.h
  ARM: at91: remove mach/at91_ramc.h and mach/at91rm9200_mc.h
  ARM: at91/pm: use the atmel-mc syscon defines
  pcmcia: at91_cf: Use syscon to configure the MC/smc
  ARM: at91: declare the at91rm9200 memory controller as a syscon
  mfd: syscon: Add Atmel MC (Memory Controller) registers definition
  ARM: at91: drop sam9_smc.c
  ata: at91: use syscon to configure the smc

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -98,7 +98,7 @@ Example:
 	};
 
 RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91rm9200-sdramc",
+- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
 			"atmel,at91sam9260-sdramc",
 			"atmel,at91sam9g45-ddramc",
 			"atmel,sama5d3-ddramc",

arch/arm/boot/dts/at91rm9200.dtsi

@@ -92,7 +92,7 @@
 			};
 
 			ramc0: ramc@ffffff00 {
-				compatible = "atmel,at91rm9200-sdramc";
+				compatible = "atmel,at91rm9200-sdramc", "syscon";
 				reg = <0xffffff00 0x100>;
 			};
 

arch/arm/mach-at91/Makefile

@@ -1,13 +1,8 @@
 #
 # Makefile for the linux kernel.
 #
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-
 obj-y		:= soc.o
 
-obj-$(CONFIG_SOC_AT91SAM9)	+= sam9_smc.o
-
 # CPU-specific support
 obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o

arch/arm/mach-at91/Makefile.boot

@@ -1,8 +0,0 @@
-# Note: the following conditions must always be true:
-#   ZRELADDR == virt_to_phys(TEXTADDR)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-
-   zreladdr-y	+= 0x20008000
-params_phys-y	:= 0x20000100
-initrd_phys-y	:= 0x20410000

arch/arm/mach-at91/include/mach/at91_ramc.h

@@ -1,28 +0,0 @@
-/*
- * Header file for the Atmel RAM Controller
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2 only
- */
-
-#ifndef __AT91_RAMC_H__
-#define __AT91_RAMC_H__
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_ramc_base[];
-
-#define at91_ramc_read(id, field) \
-	__raw_readl(at91_ramc_base[id] + field)
-
-#define at91_ramc_write(id, field, value) \
-	__raw_writel(value, at91_ramc_base[id] + field)
-#else
-.extern at91_ramc_base
-#endif
-
-#include <soc/at91/at91rm9200_sdramc.h>
-#include <soc/at91/at91sam9_ddrsdr.h>
-#include <soc/at91/at91sam9_sdramc.h>
-
-#endif /* __AT91_RAMC_H__ */

arch/arm/mach-at91/include/mach/at91rm9200_mc.h

@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_MC_H
-#define AT91RM9200_MC_H
-
-/* Memory Controller */
-#define AT91_MC_RCR		0x00			/* MC Remap Control Register */
-#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
-
-#define AT91_MC_ASR		0x04			/* MC Abort Status Register */
-#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
-#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
-#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
-#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
-#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
-#define			AT91_MC_ABTSZ_WORD		(2 << 8)
-#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
-#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
-#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
-#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
-#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
-#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
-#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
-#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
-#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
-#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
-#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
-#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
-
-#define AT91_MC_AASR		0x08			/* MC Abort Address Status Register */
-
-#define AT91_MC_MPR		0x0c			/* MC Master Priority Register */
-#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
-#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
-#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
-#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
-
-/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA		0x60			/* Chip Select Assignment Register */
-#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
-#define			AT91_EBI_CS0A_SMC		(0 << 0)
-#define			AT91_EBI_CS0A_BFC		(1 << 0)
-#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
-#define			AT91_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
-#define			AT91_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
-#define			AT91_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
-#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
-#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
-
-/* Static Memory Controller (SMC) registers */
-#define	AT91_SMC_CSR(n)		(0x70 + ((n) * 4))	/* SMC Chip Select Register */
-#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
-#define			AT91_SMC_NWS_(x)	((x) << 0)
-#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
-#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
-#define			AT91_SMC_TDF_(x)	((x) << 8)
-#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
-#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
-#define			AT91_SMC_DBW_16		(1 << 13)
-#define			AT91_SMC_DBW_8		(2 << 13)
-#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
-#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
-#define			AT91_SMC_ACSS_STD	(0 << 16)
-#define			AT91_SMC_ACSS_1		(1 << 16)
-#define			AT91_SMC_ACSS_2		(2 << 16)
-#define			AT91_SMC_ACSS_3		(3 << 16)
-#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
-#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
-#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
-#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
-
-/* Burst Flash Controller register */
-#define AT91_BFC_MR		0xc0			/* Mode Register */
-#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
-#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
-#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
-#define			AT91_BFC_BFCOM_BURST	(2 << 0)
-#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
-#define			AT91_BFC_BFCC_MCK	(1 << 2)
-#define			AT91_BFC_BFCC_DIV2	(2 << 2)
-#define			AT91_BFC_BFCC_DIV4	(3 << 2)
-#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
-#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
-#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
-#define			AT91_BFC_PAGES_16	(1 << 8)
-#define			AT91_BFC_PAGES_32	(2 << 8)
-#define			AT91_BFC_PAGES_64	(3 << 8)
-#define			AT91_BFC_PAGES_128	(4 << 8)
-#define			AT91_BFC_PAGES_256	(5 << 8)
-#define			AT91_BFC_PAGES_512	(6 << 8)
-#define			AT91_BFC_PAGES_1024	(7 << 8)
-#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
-#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
-#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
-#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
-#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9_smc.h

@@ -1,98 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9_smc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Static Memory Controllers (SMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SMC_H
-#define AT91SAM9_SMC_H
-
-#ifndef __ASSEMBLY__
-struct sam9_smc_config {
-	/* Setup register */
-	u8 ncs_read_setup;
-	u8 nrd_setup;
-	u8 ncs_write_setup;
-	u8 nwe_setup;
-
-	/* Pulse register */
-	u8 ncs_read_pulse;
-	u8 nrd_pulse;
-	u8 ncs_write_pulse;
-	u8 nwe_pulse;
-
-	/* Cycle register */
-	u16 read_cycle;
-	u16 write_cycle;
-
-	/* Mode register */
-	u32 mode;
-	u8 tdf_cycles:4;
-};
-
-extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
-#endif
-
-#define AT91_SMC_SETUP		0x00				/* Setup Register for CS n */
-#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
-#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
-#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
-#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
-#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
-#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
-
-#define AT91_SMC_PULSE		0x04				/* Pulse Register for CS n */
-#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
-#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
-#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
-#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
-#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE		0x08				/* Cycle Register for CS n */
-#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
-#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
-#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
-#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
-
-#define AT91_SMC_MODE		0x0c				/* Mode Register for CS n */
-#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
-#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
-#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
-#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
-#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
-#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
-#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
-#define			AT91_SMC_BAT_SELECT		(0 << 8)
-#define			AT91_SMC_BAT_WRITE		(1 << 8)
-#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
-#define			AT91_SMC_DBW_8			(0 << 12)
-#define			AT91_SMC_DBW_16			(1 << 12)
-#define			AT91_SMC_DBW_32			(2 << 12)
-#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
-#define			AT91_SMC_TDF_(x)		((x) << 16)
-#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
-#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
-#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
-#define			AT91_SMC_PS_4			(0 << 28)
-#define			AT91_SMC_PS_8			(1 << 28)
-#define			AT91_SMC_PS_16			(2 << 28)
-#define			AT91_SMC_PS_32			(3 << 28)
-
-#endif

arch/arm/mach-at91/pm.c

@@ -233,7 +233,7 @@ static void at91_pm_set_standby(void (*at91_standby)(void))
  */
 static void at91rm9200_standby(void)
 {
-	u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
+	u32 lpr = at91_ramc_read(0, AT91_MC_SDRAMC_LPR);
 
 	asm volatile(
 		"b    1f\n\t"
@@ -244,8 +244,8 @@ static void at91rm9200_standby(void)
 		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
 		"    str    %5, [%1, %2]"
 		:
-		: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
-		  "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
+		: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91_MC_SDRAMC_LPR),
+		  "r" (1), "r" (AT91_MC_SDRAMC_SRR),
 		  "r" (lpr));
 }
 
@@ -414,7 +414,7 @@ void __init at91rm9200_pm_init(void)
 	/*
 	 * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
 	 */
-	at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
+	at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
 
 	at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
 	at91_pm_data.memctrl = AT91_MEMCTRL_MC;

arch/arm/mach-at91/pm.h

@@ -13,7 +13,19 @@
 
 #include <asm/proc-fns.h>
 
-#include <mach/at91_ramc.h>
+#include <linux/mfd/syscon/atmel-mc.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+#include <soc/at91/at91sam9_sdramc.h>
+
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_ramc_base[];
+
+#define at91_ramc_read(id, field) \
+	__raw_readl(at91_ramc_base[id] + field)
+
+#define at91_ramc_write(id, field, value) \
+	__raw_writel(value, at91_ramc_base[id] + field)
+#endif
 
 #define AT91_MEMCTRL_MC		0
 #define AT91_MEMCTRL_SDRAMC	1

arch/arm/mach-at91/pm_suspend.S

@@ -13,7 +13,6 @@
  */
 #include <linux/linkage.h>
 #include <linux/clk/at91_pmc.h>
-#include <mach/at91_ramc.h>
 #include "pm.h"
 
 #define	SRAMC_SELF_FRESH_ACTIVE		0x01
@@ -216,7 +215,7 @@ ENTRY(at91_sramc_self_refresh)
 
 	/* Active SDRAM self-refresh mode */
 	mov	r3, #1
-	str	r3, [r2, #AT91RM9200_SDRAMC_SRR]
+	str	r3, [r2, #AT91_MC_SDRAMC_SRR]
 	b	exit_sramc_sf
 
 ddrc_sf:

arch/arm/mach-at91/sam9_smc.c

@@ -1,136 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/sam9_smc.c
- *
- * Copyright (C) 2008 Andrew Victor
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-
-
-#define AT91_SMC_CS(id, n)	(smc_base_addr[id] + ((n) * 0x10))
-
-static void __iomem *smc_base_addr[2];
-
-static void sam9_smc_cs_write_mode(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-	__raw_writel(config->mode
-		   | AT91_SMC_TDF_(config->tdf_cycles),
-		   base + AT91_SMC_MODE);
-}
-
-void sam9_smc_write_mode(int id, int cs,
-					struct sam9_smc_config *config)
-{
-	sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_write_mode);
-
-static void sam9_smc_cs_configure(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-
-	/* Setup register */
-	__raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup)
-		   | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
-		   | AT91_SMC_NRDSETUP_(config->nrd_setup)
-		   | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
-		   base + AT91_SMC_SETUP);
-
-	/* Pulse register */
-	__raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
-		   | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
-		   | AT91_SMC_NRDPULSE_(config->nrd_pulse)
-		   | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
-		   base + AT91_SMC_PULSE);
-
-	/* Cycle register */
-	__raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle)
-		   | AT91_SMC_NRDCYCLE_(config->read_cycle),
-		   base + AT91_SMC_CYCLE);
-
-	/* Mode register */
-	sam9_smc_cs_write_mode(base, config);
-}
-
-void sam9_smc_configure(int id, int cs,
-					struct sam9_smc_config *config)
-{
-	sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_configure);
-
-static void sam9_smc_cs_read_mode(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-	u32 val = __raw_readl(base + AT91_SMC_MODE);
-
-	config->mode = (val & ~AT91_SMC_NWECYCLE);
-	config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
-}
-
-void sam9_smc_read_mode(int id, int cs,
-					struct sam9_smc_config *config)
-{
-	sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_read_mode);
-
-static void sam9_smc_cs_read(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-	u32 val;
-
-	/* Setup register */
-	val = __raw_readl(base + AT91_SMC_SETUP);
-
-	config->nwe_setup = val & AT91_SMC_NWESETUP;
-	config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
-	config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
-	config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
-
-	/* Pulse register */
-	val = __raw_readl(base + AT91_SMC_PULSE);
-
-	config->nwe_pulse = val & AT91_SMC_NWEPULSE;
-	config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
-	config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
-	config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
-
-	/* Cycle register */
-	val = __raw_readl(base + AT91_SMC_CYCLE);
-
-	config->write_cycle = val & AT91_SMC_NWECYCLE;
-	config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
-
-	/* Mode register */
-	sam9_smc_cs_read_mode(base, config);
-}
-
-void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
-{
-	sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
-}
-
-void __init at91sam9_ioremap_smc(int id, u32 addr)
-{
-	if (id > 1) {
-		pr_warn("%s: id > 2\n", __func__);
-		return;
-	}
-	smc_base_addr[id] = ioremap(addr, 512);
-	if (!smc_base_addr[id])
-		pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr);
-}

arch/arm/mach-at91/sam9_smc.h

@@ -1,11 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/sam9_smc.
- *
- * Copyright (C) 2008 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init at91sam9_ioremap_smc(int id, u32 addr);

drivers/ata/Kconfig

@@ -835,7 +835,6 @@ config PATA_AT32
 config PATA_AT91
 	tristate "PATA support for AT91SAM9260"
 	depends on ARM && SOC_AT91SAM9
-	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 

drivers/ata/pata_at91.c

@@ -24,11 +24,13 @@
 #include <linux/ata.h>
 #include <linux/clk.h>
 #include <linux/libata.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-smc.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/platform_data/atmel.h>
+#include <linux/regmap.h>
 
-#include <mach/at91sam9_smc.h>
 #include <asm/gpio.h>
 
 #define DRV_NAME		"pata_at91"
@@ -57,6 +59,15 @@ struct smc_range {
 	int max;
 };
 
+struct regmap *smc;
+
+struct at91sam9_smc_generic_fields {
+	struct regmap_field *setup;
+	struct regmap_field *pulse;
+	struct regmap_field *cycle;
+	struct regmap_field *mode;
+} fields;
+
 /**
  * adjust_smc_value - adjust value for one of SMC registers.
  * @value: adjusted value
@@ -206,7 +217,6 @@ static void set_smc_timing(struct device *dev, struct ata_device *adev,
 {
 	int ret = 0;
 	int use_iordy;
-	struct sam9_smc_config smc;
 	unsigned int t6z;         /* data tristate time in ns */
 	unsigned int cycle;       /* SMC Cycle width in MCK ticks */
 	unsigned int setup;       /* SMC Setup width in MCK ticks */
@@ -244,19 +254,21 @@ static void set_smc_timing(struct device *dev, struct ata_device *adev,
 
 	dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
 
-	/* SMC Setup Register */
-	smc.nwe_setup = smc.nrd_setup = setup;
-	smc.ncs_write_setup = smc.ncs_read_setup = 0;
-	/* SMC Pulse Register */
-	smc.nwe_pulse = smc.nrd_pulse = pulse;
-	smc.ncs_write_pulse = smc.ncs_read_pulse = cs_pulse;
-	/* SMC Cycle Register */
-	smc.write_cycle = smc.read_cycle = cycle;
-	/* SMC Mode Register*/
-	smc.tdf_cycles = tdf_cycles;
-	smc.mode = info->mode;
-
-	sam9_smc_configure(0, info->cs, &smc);
+	regmap_fields_write(fields.setup, info->cs,
+			    AT91SAM9_SMC_NRDSETUP(setup) |
+			    AT91SAM9_SMC_NWESETUP(setup) |
+			    AT91SAM9_SMC_NCS_NRDSETUP(0) |
+			    AT91SAM9_SMC_NCS_WRSETUP(0));
+	regmap_fields_write(fields.pulse, info->cs,
+			    AT91SAM9_SMC_NRDPULSE(pulse) |
+			    AT91SAM9_SMC_NWEPULSE(pulse) |
+			    AT91SAM9_SMC_NCS_NRDPULSE(cs_pulse) |
+			    AT91SAM9_SMC_NCS_WRPULSE(cs_pulse));
+	regmap_fields_write(fields.cycle, info->cs,
+			    AT91SAM9_SMC_NRDCYCLE(cycle) |
+			    AT91SAM9_SMC_NWECYCLE(cycle));
+	regmap_fields_write(fields.mode, info->cs, info->mode |
+			    AT91_SMC_TDF_(tdf_cycles));
 }
 
 static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -280,21 +292,21 @@ static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
 {
 	struct at91_ide_info *info = dev->link->ap->host->private_data;
 	unsigned int consumed;
+	unsigned int mode;
 	unsigned long flags;
-	struct sam9_smc_config smc;
 
 	local_irq_save(flags);
-	sam9_smc_read_mode(0, info->cs, &smc);
+	regmap_fields_read(fields.mode, info->cs, &mode);
 
 	/* set 16bit mode before writing data */
-	smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16;
-	sam9_smc_write_mode(0, info->cs, &smc);
+	regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
+			    AT91_SMC_DBW_16);
 
 	consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
 
 	/* restore 8bit mode after data is written */
-	smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8;
-	sam9_smc_write_mode(0, info->cs, &smc);
+	regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
+			    AT91_SMC_DBW_8);
 
 	local_irq_restore(flags);
 	return consumed;
@@ -312,6 +324,36 @@ static struct ata_port_operations pata_at91_port_ops = {
 	.cable_detect	= ata_cable_40wire,
 };
 
+static int at91sam9_smc_fields_init(struct device *dev)
+{
+	struct reg_field field = REG_FIELD(0, 0, 31);
+
+	field.id_size = 8;
+	field.id_offset = AT91SAM9_SMC_GENERIC_BLK_SZ;
+
+	field.reg = AT91SAM9_SMC_SETUP(AT91SAM9_SMC_GENERIC);
+	fields.setup = devm_regmap_field_alloc(dev, smc, field);
+	if (IS_ERR(fields.setup))
+		return PTR_ERR(fields.setup);
+
+	field.reg = AT91SAM9_SMC_PULSE(AT91SAM9_SMC_GENERIC);
+	fields.pulse = devm_regmap_field_alloc(dev, smc, field);
+	if (IS_ERR(fields.pulse))
+		return PTR_ERR(fields.pulse);
+
+	field.reg = AT91SAM9_SMC_CYCLE(AT91SAM9_SMC_GENERIC);
+	fields.cycle = devm_regmap_field_alloc(dev, smc, field);
+	if (IS_ERR(fields.cycle))
+		return PTR_ERR(fields.cycle);
+
+	field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC);
+	fields.mode = devm_regmap_field_alloc(dev, smc, field);
+	if (IS_ERR(fields.mode))
+		return PTR_ERR(fields.mode);
+
+	return 0;
+}
+
 static int pata_at91_probe(struct platform_device *pdev)
 {
 	struct at91_cf_data *board = dev_get_platdata(&pdev->dev);
@@ -341,6 +383,14 @@ static int pata_at91_probe(struct platform_device *pdev)
 
 	irq = board->irq_pin;
 
+	smc = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "atmel,smc");
+	if (IS_ERR(smc))
+		return PTR_ERR(smc);
+
+	ret = at91sam9_smc_fields_init(dev);
+	if (ret < 0)
+		return ret;
+
 	/* init ata host */
 
 	host = ata_host_alloc(dev, 1);

drivers/pcmcia/Kconfig

@@ -277,7 +277,6 @@ config AT91_CF
 	tristate "AT91 CompactFlash Controller"
 	depends on PCI
 	depends on PCMCIA && ARCH_AT91
-	depends on !ARCH_MULTIPLATFORM
 	help
 	  Say Y here to support the CompactFlash controller on AT91 chips.
 	  Or choose M to compile the driver as a module named "at91_cf".

drivers/pcmcia/at91_cf.c

@@ -20,16 +20,15 @@
 #include <linux/platform_data/atmel.h>
 #include <linux/io.h>
 #include <linux/sizes.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-mc.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
+#include <linux/regmap.h>
 
 #include <pcmcia/ss.h>
 
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-
 /*
  * A0..A10 work in each range; A23 indicates I/O space;  A25 is CFRNW;
  * some other bit in {A24,A22..A11} is nREG to flag memory access
@@ -40,6 +39,8 @@
 #define	CF_IO_PHYS	(1 << 23)
 #define	CF_MEM_PHYS	(0x017ff800)
 
+struct regmap *mc;
+
 /*--------------------------------------------------------------------------*/
 
 struct at91_cf_socket {
@@ -155,10 +156,7 @@ static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
 
 	/*
 	 * Use 16 bit accesses unless/until we need 8-bit i/o space.
-	 */
-	csr = at91_ramc_read(0, AT91_SMC_CSR(cf->board->chipselect)) & ~AT91_SMC_DBW;
-
-	/*
+	 *
 	 * NOTE: this CF controller ignores IOIS16, so we can't really do
 	 * MAP_AUTOSZ.  The 16bit mode allows single byte access on either
 	 * D0-D7 (even addr) or D8-D15 (odd), so it's close enough for many
@@ -169,13 +167,14 @@ static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
 	 * CF 3.0 spec table 35 also giving the D8-D15 option.
 	 */
 	if (!(io->flags & (MAP_16BIT | MAP_AUTOSZ))) {
-		csr |= AT91_SMC_DBW_8;
+		csr = AT91_MC_SMC_DBW_8;
 		dev_dbg(&cf->pdev->dev, "8bit i/o bus\n");
 	} else {
-		csr |= AT91_SMC_DBW_16;
+		csr = AT91_MC_SMC_DBW_16;
 		dev_dbg(&cf->pdev->dev, "16bit i/o bus\n");
 	}
-	at91_ramc_write(0, AT91_SMC_CSR(cf->board->chipselect), csr);
+	regmap_update_bits(mc, AT91_MC_SMC_CSR(cf->board->chipselect),
+			   AT91_MC_SMC_DBW, csr);
 
 	io->start = cf->socket.io_offset;
 	io->stop = io->start + SZ_2K - 1;
@@ -236,6 +235,10 @@ static int at91_cf_dt_init(struct platform_device *pdev)
 
 	pdev->dev.platform_data = board;
 
+	mc = syscon_regmap_lookup_by_compatible("atmel,at91rm9200-sdramc");
+	if (IS_ERR(mc))
+		return PTR_ERR(mc);
+
 	return 0;
 }
 #else

include/linux/mfd/syscon/atmel-mc.h

@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals
+ * registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_MFD_SYSCON_ATMEL_MC_H_
+#define _LINUX_MFD_SYSCON_ATMEL_MC_H_
+
+/* Memory Controller */
+#define AT91_MC_RCR			0x00
+#define AT91_MC_RCB			BIT(0)
+
+#define AT91_MC_ASR			0x04
+#define AT91_MC_UNADD			BIT(0)
+#define AT91_MC_MISADD			BIT(1)
+#define AT91_MC_ABTSZ			GENMASK(9, 8)
+#define AT91_MC_ABTSZ_BYTE		(0 << 8)
+#define AT91_MC_ABTSZ_HALFWORD		(1 << 8)
+#define AT91_MC_ABTSZ_WORD		(2 << 8)
+#define AT91_MC_ABTTYP			GENMASK(11, 10)
+#define AT91_MC_ABTTYP_DATAREAD		(0 << 10)
+#define AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
+#define AT91_MC_ABTTYP_FETCH		(2 << 10)
+#define AT91_MC_MST(n)			BIT(16 + (n))
+#define AT91_MC_SVMST(n)		BIT(24 + (n))
+
+#define AT91_MC_AASR			0x08
+
+#define AT91_MC_MPR			0x0c
+#define AT91_MPR_MSTP(n)		GENMASK(2 + ((x) * 4), ((x) * 4))
+
+/* External Bus Interface (EBI) registers */
+#define AT91_MC_EBI_CSA			0x60
+#define AT91_MC_EBI_CS(n)		BIT(x)
+#define AT91_MC_EBI_NUM_CS		8
+
+#define AT91_MC_EBI_CFGR		0x64
+#define AT91_MC_EBI_DBPUC		BIT(0)
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_MC_SMC_CSR(n)		(0x70 + ((n) * 4))
+#define AT91_MC_SMC_NWS			GENMASK(6, 0)
+#define AT91_MC_SMC_NWS_(x)		((x) << 0)
+#define AT91_MC_SMC_WSEN		BIT(7)
+#define AT91_MC_SMC_TDF			GENMASK(11, 8)
+#define AT91_MC_SMC_TDF_(x)		((x) << 8)
+#define AT91_MC_SMC_TDF_MAX		0xf
+#define AT91_MC_SMC_BAT			BIT(12)
+#define AT91_MC_SMC_DBW			GENMASK(14, 13)
+#define AT91_MC_SMC_DBW_16		(1 << 13)
+#define AT91_MC_SMC_DBW_8		(2 << 13)
+#define AT91_MC_SMC_DPR			BIT(15)
+#define AT91_MC_SMC_ACSS		GENMASK(17, 16)
+#define AT91_MC_SMC_ACSS_(x)		((x) << 16)
+#define AT91_MC_SMC_ACSS_MAX		3
+#define AT91_MC_SMC_RWSETUP		GENMASK(26, 24)
+#define AT91_MC_SMC_RWSETUP_(x)		((x) << 24)
+#define AT91_MC_SMC_RWHOLD		GENMASK(30, 28)
+#define AT91_MC_SMC_RWHOLD_(x)		((x) << 28)
+#define AT91_MC_SMC_RWHOLDSETUP_MAX	7
+
+/* SDRAM Controller registers */
+#define AT91_MC_SDRAMC_MR		0x90
+#define AT91_MC_SDRAMC_MODE		GENMASK(3, 0)
+#define AT91_MC_SDRAMC_MODE_NORMAL	(0 << 0)
+#define AT91_MC_SDRAMC_MODE_NOP		(1 << 0)
+#define AT91_MC_SDRAMC_MODE_PRECHARGE	(2 << 0)
+#define AT91_MC_SDRAMC_MODE_LMR		(3 << 0)
+#define AT91_MC_SDRAMC_MODE_REFRESH	(4 << 0)
+#define AT91_MC_SDRAMC_DBW_16		BIT(4)
+
+#define AT91_MC_SDRAMC_TR		0x94
+#define AT91_MC_SDRAMC_COUNT		GENMASK(11, 0)
+
+#define AT91_MC_SDRAMC_CR		0x98
+#define AT91_MC_SDRAMC_NC		GENMASK(1, 0)
+#define AT91_MC_SDRAMC_NC_8		(0 << 0)
+#define AT91_MC_SDRAMC_NC_9		(1 << 0)
+#define AT91_MC_SDRAMC_NC_10		(2 << 0)
+#define AT91_MC_SDRAMC_NC_11		(3 << 0)
+#define AT91_MC_SDRAMC_NR		GENMASK(3, 2)
+#define AT91_MC_SDRAMC_NR_11		(0 << 2)
+#define AT91_MC_SDRAMC_NR_12		(1 << 2)
+#define AT91_MC_SDRAMC_NR_13		(2 << 2)
+#define AT91_MC_SDRAMC_NB		BIT(4)
+#define AT91_MC_SDRAMC_NB_2		(0 << 4)
+#define AT91_MC_SDRAMC_NB_4		(1 << 4)
+#define AT91_MC_SDRAMC_CAS		GENMASK(6, 5)
+#define AT91_MC_SDRAMC_CAS_2		(2 << 5)
+#define AT91_MC_SDRAMC_TWR		GENMASK(10,  7)
+#define AT91_MC_SDRAMC_TRC		GENMASK(14, 11)
+#define AT91_MC_SDRAMC_TRP		GENMASK(18, 15)
+#define AT91_MC_SDRAMC_TRCD		GENMASK(22, 19)
+#define AT91_MC_SDRAMC_TRAS		GENMASK(26, 23)
+#define AT91_MC_SDRAMC_TXSR		GENMASK(30, 27)
+
+#define AT91_MC_SDRAMC_SRR		0x9c
+#define AT91_MC_SDRAMC_SRCB		BIT(0)
+
+#define AT91_MC_SDRAMC_LPR		0xa0
+#define AT91_MC_SDRAMC_LPCB		BIT(0)
+
+#define AT91_MC_SDRAMC_IER		0xa4
+#define AT91_MC_SDRAMC_IDR		0xa8
+#define AT91_MC_SDRAMC_IMR		0xac
+#define AT91_MC_SDRAMC_ISR		0xb0
+#define AT91_MC_SDRAMC_RES		BIT(0)
+
+/* Burst Flash Controller register */
+#define AT91_MC_BFC_MR			0xc0
+#define AT91_MC_BFC_BFCOM		GENMASK(1, 0)
+#define AT91_MC_BFC_BFCOM_DISABLED	(0 << 0)
+#define AT91_MC_BFC_BFCOM_ASYNC		(1 << 0)
+#define AT91_MC_BFC_BFCOM_BURST		(2 << 0)
+#define AT91_MC_BFC_BFCC		GENMASK(3, 2)
+#define AT91_MC_BFC_BFCC_MCK		(1 << 2)
+#define AT91_MC_BFC_BFCC_DIV2		(2 << 2)
+#define AT91_MC_BFC_BFCC_DIV4		(3 << 2)
+#define AT91_MC_BFC_AVL			GENMASK(7,  4)
+#define AT91_MC_BFC_PAGES		GENMASK(10, 8)
+#define AT91_MC_BFC_PAGES_NO_PAGE	(0 << 8)
+#define AT91_MC_BFC_PAGES_16		(1 << 8)
+#define AT91_MC_BFC_PAGES_32		(2 << 8)
+#define AT91_MC_BFC_PAGES_64		(3 << 8)
+#define AT91_MC_BFC_PAGES_128		(4 << 8)
+#define AT91_MC_BFC_PAGES_256		(5 << 8)
+#define AT91_MC_BFC_PAGES_512		(6 << 8)
+#define AT91_MC_BFC_PAGES_1024		(7 << 8)
+#define AT91_MC_BFC_OEL			GENMASK(13, 12)
+#define AT91_MC_BFC_BAAEN		BIT(16)
+#define AT91_MC_BFC_BFOEH		BIT(17)
+#define AT91_MC_BFC_MUXEN		BIT(18)
+#define AT91_MC_BFC_RDYEN		BIT(19)
+
+#endif /* _LINUX_MFD_SYSCON_ATMEL_MC_H_ */

include/soc/at91/at91rm9200_sdramc.h

@@ -1,63 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (SDRAMC only) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_SDRAMC_H
-#define AT91RM9200_SDRAMC_H
-
-/* SDRAM Controller registers */
-#define AT91RM9200_SDRAMC_MR		0x90			/* Mode Register */
-#define		AT91RM9200_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91RM9200_SDRAMC_MODE_NORMAL		(0 << 0)
-#define			AT91RM9200_SDRAMC_MODE_NOP		(1 << 0)
-#define			AT91RM9200_SDRAMC_MODE_PRECHARGE	(2 << 0)
-#define			AT91RM9200_SDRAMC_MODE_LMR		(3 << 0)
-#define			AT91RM9200_SDRAMC_MODE_REFRESH	(4 << 0)
-#define		AT91RM9200_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
-#define			AT91RM9200_SDRAMC_DBW_32	(0 << 4)
-#define			AT91RM9200_SDRAMC_DBW_16	(1 << 4)
-
-#define AT91RM9200_SDRAMC_TR		0x94			/* Refresh Timer Register */
-#define		AT91RM9200_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
-
-#define AT91RM9200_SDRAMC_CR		0x98			/* Configuration Register */
-#define		AT91RM9200_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
-#define			AT91RM9200_SDRAMC_NC_8	(0 << 0)
-#define			AT91RM9200_SDRAMC_NC_9	(1 << 0)
-#define			AT91RM9200_SDRAMC_NC_10	(2 << 0)
-#define			AT91RM9200_SDRAMC_NC_11	(3 << 0)
-#define		AT91RM9200_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
-#define			AT91RM9200_SDRAMC_NR_11	(0 << 2)
-#define			AT91RM9200_SDRAMC_NR_12	(1 << 2)
-#define			AT91RM9200_SDRAMC_NR_13	(2 << 2)
-#define		AT91RM9200_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
-#define			AT91RM9200_SDRAMC_NB_2	(0 << 4)
-#define			AT91RM9200_SDRAMC_NB_4	(1 << 4)
-#define		AT91RM9200_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
-#define			AT91RM9200_SDRAMC_CAS_2	(2 << 5)
-#define		AT91RM9200_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
-#define		AT91RM9200_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
-#define		AT91RM9200_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
-#define		AT91RM9200_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
-#define		AT91RM9200_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
-#define		AT91RM9200_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
-
-#define AT91RM9200_SDRAMC_SRR		0x9c			/* Self Refresh Register */
-#define AT91RM9200_SDRAMC_LPR		0xa0			/* Low Power Register */
-#define AT91RM9200_SDRAMC_IER		0xa4			/* Interrupt Enable Register */
-#define AT91RM9200_SDRAMC_IDR		0xa8			/* Interrupt Disable Register */
-#define AT91RM9200_SDRAMC_IMR		0xac			/* Interrupt Mask Register */
-#define AT91RM9200_SDRAMC_ISR		0xb0			/* Interrupt Status Register */
-
-#endif