Merge branch 'topic/drm-vblank-rework' into drm-intel-next-queued

Pull in the drm vblank rework from Ville and me. drm core parts acked
by Dave Airlie

Conflicts:
	drivers/gpu/drm/i915/intel_display.c

Just a bit of fun around the placement of drm_vblank_on. This merge
resolution has been tested in drm-intel-nightly for a while already.

Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Documentation/DocBook/drm.tmpl

@@ -1895,8 +1895,8 @@ void intel_crt_init(struct drm_device *dev)
           <para>
             The function filters out modes larger than
             <parameter>max_width</parameter> and <parameter>max_height</parameter>
-            if specified. It then calls the connector
-            <methodname>mode_valid</methodname> helper operation for  each mode in
+            if specified. It then calls the optional connector
+            <methodname>mode_valid</methodname> helper operation for each mode in
             the probed list to check whether the mode is valid for the connector.
           </para>
         </listitem>
@@ -2257,7 +2257,7 @@ void intel_crt_init(struct drm_device *dev)
           <para>
             Verify whether a mode is valid for the connector. Return MODE_OK for
             supported modes and one of the enum drm_mode_status values (MODE_*)
-            for unsupported modes. This operation is mandatory.
+            for unsupported modes. This operation is optional.
           </para>
           <para>
             As the mode rejection reason is currently not used beside for
@@ -2519,6 +2519,10 @@ void (*disable_vblank) (struct drm_device *dev, int crtc);</synopsis>
       with a call to <function>drm_vblank_cleanup</function> in the driver
       <methodname>unload</methodname> operation handler.
     </para>
+    <sect2>
+      <title>Vertical Blanking and Interrupt Handling Functions Reference</title>
+!Edrivers/gpu/drm/drm_irq.c
+    </sect2>
   </sect1>
 
   <!-- Internals: open/close, file operations and ioctls -->
@@ -2861,17 +2865,16 @@ int num_ioctls;</synopsis>
             <term>DRM_IOCTL_MODESET_CTL</term>
             <listitem>
               <para>
-                This should be called by application level drivers before and
-                after mode setting, since on many devices the vertical blank
-                counter is reset at that time.  Internally, the DRM snapshots
-                the last vblank count when the ioctl is called with the
-                _DRM_PRE_MODESET command, so that the counter won't go backwards
-                (which is dealt with when _DRM_POST_MODESET is used).
+		This was only used for user-mode-settind drivers around
+		modesetting changes to allow the kernel to update the vblank
+		interrupt after mode setting, since on many devices the vertical
+		blank counter is reset to 0 at some point during modeset. Modern
+		drivers should not call this any more since with kernel mode
+		setting it is a no-op.
               </para>
             </listitem>
           </varlistentry>
         </variablelist>
-<!--!Edrivers/char/drm/drm_irq.c-->
       </para>
     </sect1>
 

drivers/gpu/drm/ast/Makefile

@@ -4,6 +4,6 @@
 
 ccflags-y := -Iinclude/drm
 
-ast-y := ast_drv.o ast_main.o ast_mode.o ast_fb.o ast_ttm.o ast_post.o
+ast-y := ast_drv.o ast_main.o ast_mode.o ast_fb.o ast_ttm.o ast_post.o ast_dp501.o
 
-obj-$(CONFIG_DRM_AST) := ast.o
+obj-$(CONFIG_DRM_AST) := ast.o

drivers/gpu/drm/ast/ast_dp501.c

@@ -0,0 +1,410 @@
+
+#include <linux/firmware.h>
+#include <drm/drmP.h>
+#include "ast_drv.h"
+MODULE_FIRMWARE("ast_dp501_fw.bin");
+
+int ast_load_dp501_microcode(struct drm_device *dev)
+{
+	struct ast_private *ast = dev->dev_private;
+	static char *fw_name = "ast_dp501_fw.bin";
+	int err;
+	err = request_firmware(&ast->dp501_fw, fw_name, dev->dev);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static void send_ack(struct ast_private *ast)
+{
+	u8 sendack;
+	sendack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0xff);
+	sendack |= 0x80;
+	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0x00, sendack);
+}
+
+static void send_nack(struct ast_private *ast)
+{
+	u8 sendack;
+	sendack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0xff);
+	sendack &= ~0x80;
+	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0x00, sendack);
+}
+
+static bool wait_ack(struct ast_private *ast)
+{
+	u8 waitack;
+	u32 retry = 0;
+	do {
+		waitack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd2, 0xff);
+		waitack &= 0x80;
+		udelay(100);
+	} while ((!waitack) && (retry++ < 1000));
+
+	if (retry < 1000)
+		return true;
+	else
+		return false;
+}
+
+static bool wait_nack(struct ast_private *ast)
+{
+	u8 waitack;
+	u32 retry = 0;
+	do {
+		waitack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd2, 0xff);
+		waitack &= 0x80;
+		udelay(100);
+	} while ((waitack) && (retry++ < 1000));
+
+	if (retry < 1000)
+		return true;
+	else
+		return false;
+}
+
+static void set_cmd_trigger(struct ast_private *ast)
+{
+	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, ~0x40, 0x40);
+}
+
+static void clear_cmd_trigger(struct ast_private *ast)
+{
+	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, ~0x40, 0x00);
+}
+
+#if 0
+static bool wait_fw_ready(struct ast_private *ast)
+{
+	u8 waitready;
+	u32 retry = 0;
+	do {
+		waitready = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd2, 0xff);
+		waitready &= 0x40;
+		udelay(100);
+	} while ((!waitready) && (retry++ < 1000));
+
+	if (retry < 1000)
+		return true;
+	else
+		return false;
+}
+#endif
+
+static bool ast_write_cmd(struct drm_device *dev, u8 data)
+{
+	struct ast_private *ast = dev->dev_private;
+	int retry = 0;
+	if (wait_nack(ast)) {
+		send_nack(ast);
+		ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9a, 0x00, data);
+		send_ack(ast);
+		set_cmd_trigger(ast);
+		do {
+			if (wait_ack(ast)) {
+				clear_cmd_trigger(ast);
+				send_nack(ast);
+				return true;
+			}
+		} while (retry++ < 100);
+	}
+	clear_cmd_trigger(ast);
+	send_nack(ast);
+	return false;
+}
+
+static bool ast_write_data(struct drm_device *dev, u8 data)
+{
+	struct ast_private *ast = dev->dev_private;
+
+	if (wait_nack(ast)) {
+		send_nack(ast);
+		ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9a, 0x00, data);
+		send_ack(ast);
+		if (wait_ack(ast)) {
+			send_nack(ast);
+			return true;
+		}
+	}
+	send_nack(ast);
+	return false;
+}
+
+#if 0
+static bool ast_read_data(struct drm_device *dev, u8 *data)
+{
+	struct ast_private *ast = dev->dev_private;
+	u8 tmp;
+
+	*data = 0;
+
+	if (wait_ack(ast) == false)
+		return false;
+	tmp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd3, 0xff);
+	*data = tmp;
+	if (wait_nack(ast) == false) {
+		send_nack(ast);
+		return false;
+	}
+	send_nack(ast);
+	return true;
+}
+
+static void clear_cmd(struct ast_private *ast)
+{
+	send_nack(ast);
+	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9a, 0x00, 0x00);
+}
+#endif
+
+void ast_set_dp501_video_output(struct drm_device *dev, u8 mode)
+{
+	ast_write_cmd(dev, 0x40);
+	ast_write_data(dev, mode);
+
+	msleep(10);
+}
+
+static u32 get_fw_base(struct ast_private *ast)
+{
+	return ast_mindwm(ast, 0x1e6e2104) & 0x7fffffff;
+}
+
+bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size)
+{
+	struct ast_private *ast = dev->dev_private;
+	u32 i, data;
+	u32 boot_address;
+
+	data = ast_mindwm(ast, 0x1e6e2100) & 0x01;
+	if (data) {
+		boot_address = get_fw_base(ast);
+		for (i = 0; i < size; i += 4)
+			*(u32 *)(addr + i) = ast_mindwm(ast, boot_address + i);
+		return true;
+	}
+	return false;
+}
+
+bool ast_launch_m68k(struct drm_device *dev)
+{
+	struct ast_private *ast = dev->dev_private;
+	u32 i, data, len = 0;
+	u32 boot_address;
+	u8 *fw_addr = NULL;
+	u8 jreg;
+
+	data = ast_mindwm(ast, 0x1e6e2100) & 0x01;
+	if (!data) {
+
+		if (ast->dp501_fw_addr) {
+			fw_addr = ast->dp501_fw_addr;
+			len = 32*1024;
+		} else if (ast->dp501_fw) {
+			fw_addr = (u8 *)ast->dp501_fw->data;
+			len = ast->dp501_fw->size;
+		}
+		/* Get BootAddress */
+		ast_moutdwm(ast, 0x1e6e2000, 0x1688a8a8);
+		data = ast_mindwm(ast, 0x1e6e0004);
+		switch (data & 0x03) {
+		case 0:
+			boot_address = 0x44000000;
+			break;
+		default:
+		case 1:
+			boot_address = 0x48000000;
+			break;
+		case 2:
+			boot_address = 0x50000000;
+			break;
+		case 3:
+			boot_address = 0x60000000;
+			break;
+		}
+		boot_address -= 0x200000; /* -2MB */
+
+		/* copy image to buffer */
+		for (i = 0; i < len; i += 4) {
+			data = *(u32 *)(fw_addr + i);
+			ast_moutdwm(ast, boot_address + i, data);
+		}
+
+		/* Init SCU */
+		ast_moutdwm(ast, 0x1e6e2000, 0x1688a8a8);
+
+		/* Launch FW */
+		ast_moutdwm(ast, 0x1e6e2104, 0x80000000 + boot_address);
+		ast_moutdwm(ast, 0x1e6e2100, 1);
+
+		/* Update Scratch */
+		data = ast_mindwm(ast, 0x1e6e2040) & 0xfffff1ff;		/* D[11:9] = 100b: UEFI handling */
+		data |= 0x800;
+		ast_moutdwm(ast, 0x1e6e2040, data);
+
+		jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x99, 0xfc); /* D[1:0]: Reserved Video Buffer */
+		jreg |= 0x02;
+		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x99, jreg);
+	}
+	return true;
+}
+
+u8 ast_get_dp501_max_clk(struct drm_device *dev)
+{
+	struct ast_private *ast = dev->dev_private;
+	u32 boot_address, offset, data;
+	u8 linkcap[4], linkrate, linklanes, maxclk = 0xff;
+
+	boot_address = get_fw_base(ast);
+
+	/* validate FW version */
+	offset = 0xf000;
+	data = ast_mindwm(ast, boot_address + offset);
+	if ((data & 0xf0) != 0x10) /* version: 1x */
+		return maxclk;
+
+	/* Read Link Capability */
+	offset  = 0xf014;
+	*(u32 *)linkcap = ast_mindwm(ast, boot_address + offset);
+	if (linkcap[2] == 0) {
+		linkrate = linkcap[0];
+		linklanes = linkcap[1];
+		data = (linkrate == 0x0a) ? (90 * linklanes) : (54 * linklanes);
+		if (data > 0xff)
+			data = 0xff;
+		maxclk = (u8)data;
+	}
+	return maxclk;
+}
+
+bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata)
+{
+	struct ast_private *ast = dev->dev_private;
+	u32 i, boot_address, offset, data;
+
+	boot_address = get_fw_base(ast);
+
+	/* validate FW version */
+	offset = 0xf000;
+	data = ast_mindwm(ast, boot_address + offset);
+	if ((data & 0xf0) != 0x10)
+		return false;
+
+	/* validate PnP Monitor */
+	offset = 0xf010;
+	data = ast_mindwm(ast, boot_address + offset);
+	if (!(data & 0x01))
+		return false;
+
+	/* Read EDID */
+	offset = 0xf020;
+	for (i = 0; i < 128; i += 4) {
+		data = ast_mindwm(ast, boot_address + offset + i);
+		*(u32 *)(ediddata + i) = data;
+	}
+
+	return true;
+}
+
+static bool ast_init_dvo(struct drm_device *dev)
+{
+	struct ast_private *ast = dev->dev_private;
+	u8 jreg;
+	u32 data;
+	ast_write32(ast, 0xf004, 0x1e6e0000);
+	ast_write32(ast, 0xf000, 0x1);
+	ast_write32(ast, 0x12000, 0x1688a8a8);
+
+	jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
+	if (!(jreg & 0x80)) {
+		/* Init SCU DVO Settings */
+		data = ast_read32(ast, 0x12008);
+		/* delay phase */
+		data &= 0xfffff8ff;
+		data |= 0x00000500;
+		ast_write32(ast, 0x12008, data);
+
+		if (ast->chip == AST2300) {
+			data = ast_read32(ast, 0x12084);
+			/* multi-pins for DVO single-edge */
+			data |= 0xfffe0000;
+			ast_write32(ast, 0x12084, data);
+
+			data = ast_read32(ast, 0x12088);
+			/* multi-pins for DVO single-edge */
+			data |= 0x000fffff;
+			ast_write32(ast, 0x12088, data);
+
+			data = ast_read32(ast, 0x12090);
+			/* multi-pins for DVO single-edge */
+			data &= 0xffffffcf;
+			data |= 0x00000020;
+			ast_write32(ast, 0x12090, data);
+		} else { /* AST2400 */
+			data = ast_read32(ast, 0x12088);
+			/* multi-pins for DVO single-edge */
+			data |= 0x30000000;
+			ast_write32(ast, 0x12088, data);
+
+			data = ast_read32(ast, 0x1208c);
+			/* multi-pins for DVO single-edge */
+			data |= 0x000000cf;
+			ast_write32(ast, 0x1208c, data);
+
+			data = ast_read32(ast, 0x120a4);
+			/* multi-pins for DVO single-edge */
+			data |= 0xffff0000;
+			ast_write32(ast, 0x120a4, data);
+
+			data = ast_read32(ast, 0x120a8);
+			/* multi-pins for DVO single-edge */
+			data |= 0x0000000f;
+			ast_write32(ast, 0x120a8, data);
+
+			data = ast_read32(ast, 0x12094);
+			/* multi-pins for DVO single-edge */
+			data |= 0x00000002;
+			ast_write32(ast, 0x12094, data);
+		}
+	}
+
+	/* Force to DVO */
+	data = ast_read32(ast, 0x1202c);
+	data &= 0xfffbffff;
+	ast_write32(ast, 0x1202c, data);
+
+	/* Init VGA DVO Settings */
+	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x80);
+	return true;
+}
+
+void ast_init_3rdtx(struct drm_device *dev)
+{
+	struct ast_private *ast = dev->dev_private;
+	u8 jreg;
+	u32 data;
+	if (ast->chip == AST2300 || ast->chip == AST2400) {
+		jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
+		switch (jreg & 0x0e) {
+		case 0x04:
+			ast_init_dvo(dev);
+			break;
+		case 0x08:
+			ast_launch_m68k(dev);
+			break;
+		case 0x0c:
+			ast_init_dvo(dev);
+			break;
+		default:
+			if (ast->tx_chip_type == AST_TX_SIL164)
+				ast_init_dvo(dev);
+			else {
+				ast_write32(ast, 0x12000, 0x1688a8a8);
+				data = ast_read32(ast, 0x1202c);
+				data &= 0xfffcffff;
+				ast_write32(ast, 0, data);
+			}
+		}
+	}
+}

drivers/gpu/drm/ast/ast_drv.h

@@ -61,9 +61,17 @@ enum ast_chip {
 	AST2200,
 	AST2150,
 	AST2300,
+	AST2400,
 	AST1180,
 };
 
+enum ast_tx_chip {
+	AST_TX_NONE,
+	AST_TX_SIL164,
+	AST_TX_ITE66121,
+	AST_TX_DP501,
+};
+
 #define AST_DRAM_512Mx16 0
 #define AST_DRAM_1Gx16   1
 #define AST_DRAM_512Mx32 2
@@ -102,6 +110,12 @@ struct ast_private {
 	 * we have. */
 	struct ttm_bo_kmap_obj cache_kmap;
 	int next_cursor;
+	bool support_wide_screen;
+
+	enum ast_tx_chip tx_chip_type;
+	u8 dp501_maxclk;
+	u8 *dp501_fw_addr;
+	const struct firmware *dp501_fw;	/* dp501 fw */
 };
 
 int ast_driver_load(struct drm_device *dev, unsigned long flags);
@@ -368,4 +382,14 @@ int ast_mmap(struct file *filp, struct vm_area_struct *vma);
 
 /* ast post */
 void ast_post_gpu(struct drm_device *dev);
+u32 ast_mindwm(struct ast_private *ast, u32 r);
+void ast_moutdwm(struct ast_private *ast, u32 r, u32 v);
+/* ast dp501 */
+int ast_load_dp501_microcode(struct drm_device *dev);
+void ast_set_dp501_video_output(struct drm_device *dev, u8 mode);
+bool ast_launch_m68k(struct drm_device *dev);
+bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size);
+bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata);
+u8 ast_get_dp501_max_clk(struct drm_device *dev);
+void ast_init_3rdtx(struct drm_device *dev);
 #endif

drivers/gpu/drm/ast/ast_main.c

@@ -66,12 +66,16 @@ uint8_t ast_get_index_reg_mask(struct ast_private *ast,
 static int ast_detect_chip(struct drm_device *dev)
 {
 	struct ast_private *ast = dev->dev_private;
+	uint32_t data, jreg;
 
 	if (dev->pdev->device == PCI_CHIP_AST1180) {
 		ast->chip = AST1100;
 		DRM_INFO("AST 1180 detected\n");
 	} else {
-		if (dev->pdev->revision >= 0x20) {
+		if (dev->pdev->revision >= 0x30) {
+			ast->chip = AST2400;
+			DRM_INFO("AST 2400 detected\n");
+		} else if (dev->pdev->revision >= 0x20) {
 			ast->chip = AST2300;
 			DRM_INFO("AST 2300 detected\n");
 		} else if (dev->pdev->revision >= 0x10) {
@@ -104,6 +108,59 @@ static int ast_detect_chip(struct drm_device *dev)
 			DRM_INFO("AST 2000 detected\n");
 		}
 	}
+
+	switch (ast->chip) {
+	case AST1180:
+		ast->support_wide_screen = true;
+		break;
+	case AST2000:
+		ast->support_wide_screen = false;
+		break;
+	default:
+		jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
+		if (!(jreg & 0x80))
+			ast->support_wide_screen = true;
+		else if (jreg & 0x01)
+			ast->support_wide_screen = true;
+		else {
+			ast->support_wide_screen = false;
+			ast_write32(ast, 0xf004, 0x1e6e0000);
+			ast_write32(ast, 0xf000, 0x1);
+			data = ast_read32(ast, 0x1207c);
+			data &= 0x300;
+			if (ast->chip == AST2300 && data == 0x0) /* ast1300 */
+				ast->support_wide_screen = true;
+			if (ast->chip == AST2400 && data == 0x100) /* ast1400 */
+				ast->support_wide_screen = true;
+		}
+		break;
+	}
+
+	ast->tx_chip_type = AST_TX_NONE;
+	jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xff);
+	if (jreg & 0x80)
+		ast->tx_chip_type = AST_TX_SIL164;
+	if ((ast->chip == AST2300) || (ast->chip == AST2400)) {
+		jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
+		switch (jreg) {
+		case 0x04:
+			ast->tx_chip_type = AST_TX_SIL164;
+			break;
+		case 0x08:
+			ast->dp501_fw_addr = kzalloc(32*1024, GFP_KERNEL);
+			if (ast->dp501_fw_addr) {
+				/* backup firmware */
+				if (ast_backup_fw(dev, ast->dp501_fw_addr, 32*1024)) {
+					kfree(ast->dp501_fw_addr);
+					ast->dp501_fw_addr = NULL;
+				}
+			}
+			/* fallthrough */
+		case 0x0c:
+			ast->tx_chip_type = AST_TX_DP501;
+		}
+	}
+
 	return 0;
 }
 
@@ -129,7 +186,7 @@ static int ast_get_dram_info(struct drm_device *dev)
 	else
 		ast->dram_bus_width = 32;
 
-	if (ast->chip == AST2300) {
+	if (ast->chip == AST2300 || ast->chip == AST2400) {
 		switch (data & 0x03) {
 		case 0:
 			ast->dram_type = AST_DRAM_512Mx16;
@@ -257,17 +314,32 @@ static u32 ast_get_vram_info(struct drm_device *dev)
 {
 	struct ast_private *ast = dev->dev_private;
 	u8 jreg;
-
+	u32 vram_size;
 	ast_open_key(ast);
 
+	vram_size = AST_VIDMEM_DEFAULT_SIZE;
 	jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xaa, 0xff);
 	switch (jreg & 3) {
-	case 0: return AST_VIDMEM_SIZE_8M;
-	case 1: return AST_VIDMEM_SIZE_16M;
-	case 2: return AST_VIDMEM_SIZE_32M;
-	case 3: return AST_VIDMEM_SIZE_64M;
+	case 0: vram_size = AST_VIDMEM_SIZE_8M; break;
+	case 1: vram_size = AST_VIDMEM_SIZE_16M; break;
+	case 2: vram_size = AST_VIDMEM_SIZE_32M; break;
+	case 3: vram_size = AST_VIDMEM_SIZE_64M; break;
 	}
-	return AST_VIDMEM_DEFAULT_SIZE;
+
+	jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x99, 0xff);
+	switch (jreg & 0x03) {
+	case 1:
+		vram_size -= 0x100000;
+		break;
+	case 2:
+		vram_size -= 0x200000;
+		break;
+	case 3:
+		vram_size -= 0x400000;
+		break;
+	}
+
+	return vram_size;
 }
 
 int ast_driver_load(struct drm_device *dev, unsigned long flags)
@@ -316,6 +388,7 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
 	if (ast->chip == AST2100 ||
 	    ast->chip == AST2200 ||
 	    ast->chip == AST2300 ||
+	    ast->chip == AST2400 ||
 	    ast->chip == AST1180) {
 		dev->mode_config.max_width = 1920;
 		dev->mode_config.max_height = 2048;
@@ -343,6 +416,7 @@ int ast_driver_unload(struct drm_device *dev)
 {
 	struct ast_private *ast = dev->dev_private;
 
+	kfree(ast->dp501_fw_addr);
 	ast_mode_fini(dev);
 	ast_fbdev_fini(dev);
 	drm_mode_config_cleanup(dev);

drivers/gpu/drm/ast/ast_mode.c

@@ -115,11 +115,17 @@ static bool ast_get_vbios_mode_info(struct drm_crtc *crtc, struct drm_display_mo
 		else
 			vbios_mode->enh_table = &res_1280x1024[refresh_rate_index];
 		break;
+	case 1360:
+		vbios_mode->enh_table = &res_1360x768[refresh_rate_index];
+		break;
 	case 1440:
 		vbios_mode->enh_table = &res_1440x900[refresh_rate_index];
 		break;
 	case 1600:
-		vbios_mode->enh_table = &res_1600x1200[refresh_rate_index];
+		if (crtc->mode.crtc_vdisplay == 900)
+			vbios_mode->enh_table = &res_1600x900[refresh_rate_index];
+		else
+			vbios_mode->enh_table = &res_1600x1200[refresh_rate_index];
 		break;
 	case 1680:
 		vbios_mode->enh_table = &res_1680x1050[refresh_rate_index];
@@ -175,14 +181,17 @@ static bool ast_get_vbios_mode_info(struct drm_crtc *crtc, struct drm_display_mo
 		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x8d, refresh_rate_index & 0xff);
 		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x8e, mode_id & 0xff);
 
-		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x91, 0xa8);
-		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x92, crtc->primary->fb->bits_per_pixel);
-		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x93, adjusted_mode->clock / 1000);
-		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x94, adjusted_mode->crtc_hdisplay);
-		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x95, adjusted_mode->crtc_hdisplay >> 8);
+		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x91, 0x00);
+		if (vbios_mode->enh_table->flags & NewModeInfo) {
+			ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x91, 0xa8);
+			ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x92, crtc->primary->fb->bits_per_pixel);
+			ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x93, adjusted_mode->clock / 1000);
+			ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x94, adjusted_mode->crtc_hdisplay);
+			ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x95, adjusted_mode->crtc_hdisplay >> 8);
 
-		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x96, adjusted_mode->crtc_vdisplay);
-		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x97, adjusted_mode->crtc_vdisplay >> 8);
+			ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x96, adjusted_mode->crtc_vdisplay);
+			ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x97, adjusted_mode->crtc_vdisplay >> 8);
+		}
 	}
 
 	return true;
@@ -389,7 +398,7 @@ static void ast_set_ext_reg(struct drm_crtc *crtc, struct drm_display_mode *mode
 	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa8, 0xfd, jregA8);
 
 	/* Set Threshold */
-	if (ast->chip == AST2300) {
+	if (ast->chip == AST2300 || ast->chip == AST2400) {
 		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa7, 0x78);
 		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa6, 0x60);
 	} else if (ast->chip == AST2100 ||
@@ -451,9 +460,13 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
 	case DRM_MODE_DPMS_STANDBY:
 	case DRM_MODE_DPMS_SUSPEND:
 		ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x1, 0xdf, 0);
+		if (ast->tx_chip_type == AST_TX_DP501)
+			ast_set_dp501_video_output(crtc->dev, 1);
 		ast_crtc_load_lut(crtc);
 		break;
 	case DRM_MODE_DPMS_OFF:
+		if (ast->tx_chip_type == AST_TX_DP501)
+			ast_set_dp501_video_output(crtc->dev, 0);
 		ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x1, 0xdf, 0x20);
 		break;
 	}
@@ -729,10 +742,24 @@ static int ast_encoder_init(struct drm_device *dev)
 static int ast_get_modes(struct drm_connector *connector)
 {
 	struct ast_connector *ast_connector = to_ast_connector(connector);
+	struct ast_private *ast = connector->dev->dev_private;
 	struct edid *edid;
 	int ret;
-
-	edid = drm_get_edid(connector, &ast_connector->i2c->adapter);
+	bool flags = false;
+	if (ast->tx_chip_type == AST_TX_DP501) {
+		ast->dp501_maxclk = 0xff;
+		edid = kmalloc(128, GFP_KERNEL);
+		if (!edid)
+			return -ENOMEM;
+
+		flags = ast_dp501_read_edid(connector->dev, (u8 *)edid);
+		if (flags)
+			ast->dp501_maxclk = ast_get_dp501_max_clk(connector->dev);
+		else
+			kfree(edid);
+	}
+	if (!flags)
+		edid = drm_get_edid(connector, &ast_connector->i2c->adapter);
 	if (edid) {
 		drm_mode_connector_update_edid_property(&ast_connector->base, edid);
 		ret = drm_add_edid_modes(connector, edid);
@@ -746,7 +773,56 @@ static int ast_get_modes(struct drm_connector *connector)
 static int ast_mode_valid(struct drm_connector *connector,
 			  struct drm_display_mode *mode)
 {
-	return MODE_OK;
+	struct ast_private *ast = connector->dev->dev_private;
+	int flags = MODE_NOMODE;
+	uint32_t jtemp;
+
+	if (ast->support_wide_screen) {
+		if ((mode->hdisplay == 1680) && (mode->vdisplay == 1050))
+			return MODE_OK;
+		if ((mode->hdisplay == 1280) && (mode->vdisplay == 800))
+			return MODE_OK;
+		if ((mode->hdisplay == 1440) && (mode->vdisplay == 900))
+			return MODE_OK;
+		if ((mode->hdisplay == 1360) && (mode->vdisplay == 768))
+			return MODE_OK;
+		if ((mode->hdisplay == 1600) && (mode->vdisplay == 900))
+			return MODE_OK;
+
+		if ((ast->chip == AST2100) || (ast->chip == AST2200) || (ast->chip == AST2300) || (ast->chip == AST2400) || (ast->chip == AST1180)) {
+			if ((mode->hdisplay == 1920) && (mode->vdisplay == 1080))
+				return MODE_OK;
+
+			if ((mode->hdisplay == 1920) && (mode->vdisplay == 1200)) {
+				jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
+				if (jtemp & 0x01)
+					return MODE_NOMODE;
+				else
+					return MODE_OK;
+			}
+		}
+	}
+	switch (mode->hdisplay) {
+	case 640:
+		if (mode->vdisplay == 480) flags = MODE_OK;
+		break;
+	case 800:
+		if (mode->vdisplay == 600) flags = MODE_OK;
+		break;
+	case 1024:
+		if (mode->vdisplay == 768) flags = MODE_OK;
+		break;
+	case 1280:
+		if (mode->vdisplay == 1024) flags = MODE_OK;
+		break;
+	case 1600:
+		if (mode->vdisplay == 1200) flags = MODE_OK;
+		break;
+	default:
+		return flags;
+	}
+
+	return flags;
 }
 
 static void ast_connector_destroy(struct drm_connector *connector)

drivers/gpu/drm/ast/ast_post.c

@@ -78,7 +78,7 @@ ast_set_def_ext_reg(struct drm_device *dev)
 	for (i = 0x81; i <= 0x8f; i++)
 		ast_set_index_reg(ast, AST_IO_CRTC_PORT, i, 0x00);
 
-	if (ast->chip == AST2300) {
+	if (ast->chip == AST2300 || ast->chip == AST2400) {
 		if (dev->pdev->revision >= 0x20)
 			ext_reg_info = extreginfo_ast2300;
 		else
@@ -102,23 +102,32 @@ ast_set_def_ext_reg(struct drm_device *dev)
 
 	/* Enable RAMDAC for A1 */
 	reg = 0x04;
-	if (ast->chip == AST2300)
+	if (ast->chip == AST2300 || ast->chip == AST2400)
 		reg |= 0x20;
 	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xff, reg);
 }
 
-static inline u32 mindwm(struct ast_private *ast, u32 r)
+u32 ast_mindwm(struct ast_private *ast, u32 r)
 {
+	uint32_t data;
+
 	ast_write32(ast, 0xf004, r & 0xffff0000);
 	ast_write32(ast, 0xf000, 0x1);
 
+	do {
+		data = ast_read32(ast, 0xf004) & 0xffff0000;
+	} while (data != (r & 0xffff0000));
 	return ast_read32(ast, 0x10000 + (r & 0x0000ffff));
 }
 
-static inline void moutdwm(struct ast_private *ast, u32 r, u32 v)
+void ast_moutdwm(struct ast_private *ast, u32 r, u32 v)
 {
+	uint32_t data;
 	ast_write32(ast, 0xf004, r & 0xffff0000);
 	ast_write32(ast, 0xf000, 0x1);
+	do {
+		data = ast_read32(ast, 0xf004) & 0xffff0000;
+	} while (data != (r & 0xffff0000));
 	ast_write32(ast, 0x10000 + (r & 0x0000ffff), v);
 }
 
@@ -154,28 +163,28 @@ static u32 mmctestburst2_ast2150(struct ast_private *ast, u32 datagen)
 {
 	u32 data, timeout;
 
-	moutdwm(ast, 0x1e6e0070, 0x00000000);
-	moutdwm(ast, 0x1e6e0070, 0x00000001 | (datagen << 3));
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000001 | (datagen << 3));
 	timeout = 0;
 	do {
-		data = mindwm(ast, 0x1e6e0070) & 0x40;
+		data = ast_mindwm(ast, 0x1e6e0070) & 0x40;
 		if (++timeout > TIMEOUT_AST2150) {
-			moutdwm(ast, 0x1e6e0070, 0x00000000);
+			ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
 			return 0xffffffff;
 		}
 	} while (!data);
-	moutdwm(ast, 0x1e6e0070, 0x00000000);
-	moutdwm(ast, 0x1e6e0070, 0x00000003 | (datagen << 3));
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000003 | (datagen << 3));
 	timeout = 0;
 	do {
-		data = mindwm(ast, 0x1e6e0070) & 0x40;
+		data = ast_mindwm(ast, 0x1e6e0070) & 0x40;
 		if (++timeout > TIMEOUT_AST2150) {
-			moutdwm(ast, 0x1e6e0070, 0x00000000);
+			ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
 			return 0xffffffff;
 		}
 	} while (!data);
-	data = (mindwm(ast, 0x1e6e0070) & 0x80) >> 7;
-	moutdwm(ast, 0x1e6e0070, 0x00000000);
+	data = (ast_mindwm(ast, 0x1e6e0070) & 0x80) >> 7;
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
 	return data;
 }
 
@@ -184,18 +193,18 @@ static u32 mmctestsingle2_ast2150(struct ast_private *ast, u32 datagen)
 {
 	u32 data, timeout;
 
-	moutdwm(ast, 0x1e6e0070, 0x00000000);
-	moutdwm(ast, 0x1e6e0070, 0x00000005 | (datagen << 3));
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000005 | (datagen << 3));
 	timeout = 0;
 	do {
-		data = mindwm(ast, 0x1e6e0070) & 0x40;
+		data = ast_mindwm(ast, 0x1e6e0070) & 0x40;
 		if (++timeout > TIMEOUT_AST2150) {
-			moutdwm(ast, 0x1e6e0070, 0x00000000);
+			ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
 			return 0xffffffff;
 		}
 	} while (!data);
-	data = (mindwm(ast, 0x1e6e0070) & 0x80) >> 7;
-	moutdwm(ast, 0x1e6e0070, 0x00000000);
+	data = (ast_mindwm(ast, 0x1e6e0070) & 0x80) >> 7;
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
 	return data;
 }
 #endif
@@ -215,7 +224,7 @@ static int cbrscan_ast2150(struct ast_private *ast, int busw)
 	u32 patcnt, loop;
 
 	for (patcnt = 0; patcnt < CBR_PATNUM_AST2150; patcnt++) {
-		moutdwm(ast, 0x1e6e007c, pattern_AST2150[patcnt]);
+		ast_moutdwm(ast, 0x1e6e007c, pattern_AST2150[patcnt]);
 		for (loop = 0; loop < CBR_PASSNUM_AST2150; loop++) {
 			if (cbrtest_ast2150(ast))
 				break;
@@ -237,7 +246,7 @@ cbr_start:
 	passcnt = 0;
 
 	for (dlli = 0; dlli < 100; dlli++) {
-		moutdwm(ast, 0x1e6e0068, dlli | (dlli << 8) | (dlli << 16) | (dlli << 24));
+		ast_moutdwm(ast, 0x1e6e0068, dlli | (dlli << 8) | (dlli << 16) | (dlli << 24));
 		data = cbrscan_ast2150(ast, busw);
 		if (data != 0) {
 			if (data & 0x1) {
@@ -254,7 +263,7 @@ cbr_start:
 		goto cbr_start;
 
 	dlli = dll_min[0] + (((dll_max[0] - dll_min[0]) * 7) >> 4);
-	moutdwm(ast, 0x1e6e0068, dlli | (dlli << 8) | (dlli << 16) | (dlli << 24));
+	ast_moutdwm(ast, 0x1e6e0068, dlli | (dlli << 8) | (dlli << 16) | (dlli << 24));
 }
 
 
@@ -365,10 +374,12 @@ void ast_post_gpu(struct drm_device *dev)
 	ast_open_key(ast);
 	ast_set_def_ext_reg(dev);
 
-	if (ast->chip == AST2300)
+	if (ast->chip == AST2300 || ast->chip == AST2400)
 		ast_init_dram_2300(dev);
 	else
 		ast_init_dram_reg(dev);
+
+	ast_init_3rdtx(dev);
 }
 
 /* AST 2300 DRAM settings */
@@ -403,6 +414,7 @@ struct ast2300_dram_param {
 /*
  * DQSI DLL CBR Setting
  */
+#define CBR_SIZE0            ((1  << 10) - 1)
 #define CBR_SIZE1            ((4  << 10) - 1)
 #define CBR_SIZE2            ((64 << 10) - 1)
 #define CBR_PASSNUM          5
@@ -423,88 +435,84 @@ static const u32 pattern[8] = {
 	0x7C61D253
 };
 
-#if 0 /* unused in DDX, included for completeness */
 static int mmc_test_burst(struct ast_private *ast, u32 datagen)
 {
 	u32 data, timeout;
 
-	moutdwm(ast, 0x1e6e0070, 0x00000000);
-	moutdwm(ast, 0x1e6e0070, 0x000000c1 | (datagen << 3));
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
+	ast_moutdwm(ast, 0x1e6e0070, 0x000000c1 | (datagen << 3));
 	timeout = 0;
 	do {
-		data = mindwm(ast, 0x1e6e0070) & 0x3000;
+		data = ast_mindwm(ast, 0x1e6e0070) & 0x3000;
 		if (data & 0x2000) {
 			return 0;
 		}
 		if (++timeout > TIMEOUT) {
-			moutdwm(ast, 0x1e6e0070, 0x00000000);
+			ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
 			return 0;
 		}
 	} while (!data);
-	moutdwm(ast, 0x1e6e0070, 0x00000000);
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
 	return 1;
 }
-#endif
 
 static int mmc_test_burst2(struct ast_private *ast, u32 datagen)
 {
 	u32 data, timeout;
 
-	moutdwm(ast, 0x1e6e0070, 0x00000000);
-	moutdwm(ast, 0x1e6e0070, 0x00000041 | (datagen << 3));
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000041 | (datagen << 3));
 	timeout = 0;
 	do {
-		data = mindwm(ast, 0x1e6e0070) & 0x1000;
+		data = ast_mindwm(ast, 0x1e6e0070) & 0x1000;
 		if (++timeout > TIMEOUT) {
-			moutdwm(ast, 0x1e6e0070, 0x0);
+			ast_moutdwm(ast, 0x1e6e0070, 0x0);
 			return -1;
 		}
 	} while (!data);
-	data = mindwm(ast, 0x1e6e0078);
+	data = ast_mindwm(ast, 0x1e6e0078);
 	data = (data | (data >> 16)) & 0xffff;
-	moutdwm(ast, 0x1e6e0070, 0x0);
+	ast_moutdwm(ast, 0x1e6e0070, 0x0);
 	return data;
 }
 
-#if 0 /* Unused in DDX here for completeness */
 static int mmc_test_single(struct ast_private *ast, u32 datagen)
 {
 	u32 data, timeout;
 
-	moutdwm(ast, 0x1e6e0070, 0x00000000);
-	moutdwm(ast, 0x1e6e0070, 0x000000c5 | (datagen << 3));
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
+	ast_moutdwm(ast, 0x1e6e0070, 0x000000c5 | (datagen << 3));
 	timeout = 0;
 	do {
-		data = mindwm(ast, 0x1e6e0070) & 0x3000;
+		data = ast_mindwm(ast, 0x1e6e0070) & 0x3000;
 		if (data & 0x2000)
 			return 0;
 		if (++timeout > TIMEOUT) {
-			moutdwm(ast, 0x1e6e0070, 0x0);
+			ast_moutdwm(ast, 0x1e6e0070, 0x0);
 			return 0;
 		}
 	} while (!data);
-	moutdwm(ast, 0x1e6e0070, 0x0);
+	ast_moutdwm(ast, 0x1e6e0070, 0x0);
 	return 1;
 }
-#endif
 
 static int mmc_test_single2(struct ast_private *ast, u32 datagen)
 {
 	u32 data, timeout;
 
-	moutdwm(ast, 0x1e6e0070, 0x00000000);
-	moutdwm(ast, 0x1e6e0070, 0x00000005 | (datagen << 3));
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000000);
+	ast_moutdwm(ast, 0x1e6e0070, 0x00000005 | (datagen << 3));
 	timeout = 0;
 	do {
-		data = mindwm(ast, 0x1e6e0070) & 0x1000;
+		data = ast_mindwm(ast, 0x1e6e0070) & 0x1000;
 		if (++timeout > TIMEOUT) {
-			moutdwm(ast, 0x1e6e0070, 0x0);
+			ast_moutdwm(ast, 0x1e6e0070, 0x0);
 			return -1;
 		}
 	} while (!data);
-	data = mindwm(ast, 0x1e6e0078);
+	data = ast_mindwm(ast, 0x1e6e0078);
 	data = (data | (data >> 16)) & 0xffff;
-	moutdwm(ast, 0x1e6e0070, 0x0);
+	ast_moutdwm(ast, 0x1e6e0070, 0x0);
 	return data;
 }
 
@@ -533,7 +541,7 @@ static int cbr_scan(struct ast_private *ast)
 
 	data2 = 3;
 	for (patcnt = 0; patcnt < CBR_PATNUM; patcnt++) {
-		moutdwm(ast, 0x1e6e007c, pattern[patcnt]);
+		ast_moutdwm(ast, 0x1e6e007c, pattern[patcnt]);
 		for (loop = 0; loop < CBR_PASSNUM2; loop++) {
 			if ((data = cbr_test(ast)) != 0) {
 				data2 &= data;
@@ -568,7 +576,7 @@ static u32 cbr_scan2(struct ast_private *ast)
 
 	data2 = 0xffff;
 	for (patcnt = 0; patcnt < CBR_PATNUM; patcnt++) {
-		moutdwm(ast, 0x1e6e007c, pattern[patcnt]);
+		ast_moutdwm(ast, 0x1e6e007c, pattern[patcnt]);
 		for (loop = 0; loop < CBR_PASSNUM2; loop++) {
 			if ((data = cbr_test2(ast)) != 0) {
 				data2 &= data;
@@ -583,106 +591,35 @@ static u32 cbr_scan2(struct ast_private *ast)
 	return data2;
 }
 
-#if 0 /* unused in DDX - added for completeness */
-static void finetuneDQI(struct ast_private *ast, struct ast2300_dram_param *param)
+static u32 cbr_test3(struct ast_private *ast)
 {
-	u32 gold_sadj[2], dllmin[16], dllmax[16], dlli, data, cnt, mask, passcnt;
-
-	gold_sadj[0] = (mindwm(ast, 0x1E6E0024) >> 16) & 0xffff;
-	gold_sadj[1] = gold_sadj[0] >> 8;
-	gold_sadj[0] = gold_sadj[0] & 0xff;
-	gold_sadj[0] = (gold_sadj[0] + gold_sadj[1]) >> 1;
-	gold_sadj[1] = gold_sadj[0];
-
-	for (cnt = 0; cnt < 16; cnt++) {
-		dllmin[cnt] = 0xff;
-		dllmax[cnt] = 0x0;
-	}
-	passcnt = 0;
-	for (dlli = 0; dlli < 76; dlli++) {
-		moutdwm(ast, 0x1E6E0068, 0x00001400 | (dlli << 16) | (dlli << 24));
-		/* Wait DQSI latch phase calibration */
-		moutdwm(ast, 0x1E6E0074, 0x00000010);
-		moutdwm(ast, 0x1E6E0070, 0x00000003);
-		do {
-			data = mindwm(ast, 0x1E6E0070);
-		} while (!(data & 0x00001000));
-		moutdwm(ast, 0x1E6E0070, 0x00000000);
+	if (!mmc_test_burst(ast, 0))
+		return 0;
+	if (!mmc_test_single(ast, 0))
+		return 0;
+	return 1;
+}
 
-		moutdwm(ast, 0x1E6E0074, CBR_SIZE1);
-		data = cbr_scan2(ast);
-		if (data != 0) {
-			mask = 0x00010001;
-			for (cnt = 0; cnt < 16; cnt++) {
-				if (data & mask) {
-					if (dllmin[cnt] > dlli) {
-						dllmin[cnt] = dlli;
-					}
-					if (dllmax[cnt] < dlli) {
-						dllmax[cnt] = dlli;
-					}
-				}
-				mask <<= 1;
-			}
-			passcnt++;
-		} else if (passcnt >= CBR_THRESHOLD) {
-			break;
-		}
-	}
-	data = 0;
-	for (cnt = 0; cnt < 8; cnt++) {
-		data >>= 3;
-		if ((dllmax[cnt] > dllmin[cnt]) && ((dllmax[cnt] - dllmin[cnt]) >= CBR_THRESHOLD)) {
-			dlli = (dllmin[cnt] + dllmax[cnt]) >> 1;
-			if (gold_sadj[0] >= dlli) {
-				dlli = (gold_sadj[0] - dlli) >> 1;
-				if (dlli > 3) {
-					dlli = 3;
-				}
-			} else {
-				dlli = (dlli - gold_sadj[0]) >> 1;
-				if (dlli > 4) {
-					dlli = 4;
-				}
-				dlli = (8 - dlli) & 0x7;
-			}
-			data |= dlli << 21;
-		}
-	}
-	moutdwm(ast, 0x1E6E0080, data);
+static u32 cbr_scan3(struct ast_private *ast)
+{
+	u32 patcnt, loop;
 
-	data = 0;
-	for (cnt = 8; cnt < 16; cnt++) {
-		data >>= 3;
-		if ((dllmax[cnt] > dllmin[cnt]) && ((dllmax[cnt] - dllmin[cnt]) >= CBR_THRESHOLD)) {
-			dlli = (dllmin[cnt] + dllmax[cnt]) >> 1;
-			if (gold_sadj[1] >= dlli) {
-				dlli = (gold_sadj[1] - dlli) >> 1;
-				if (dlli > 3) {
-					dlli = 3;
-				} else {
-					dlli = (dlli - 1) & 0x7;
-				}
-			} else {
-				dlli = (dlli - gold_sadj[1]) >> 1;
-				dlli += 1;
-				if (dlli > 4) {
-					dlli = 4;
-				}
-				dlli = (8 - dlli) & 0x7;
-			}
-			data |= dlli << 21;
+	for (patcnt = 0; patcnt < CBR_PATNUM; patcnt++) {
+		ast_moutdwm(ast, 0x1e6e007c, pattern[patcnt]);
+		for (loop = 0; loop < 2; loop++) {
+			if (cbr_test3(ast))
+				break;
 		}
+		if (loop == 2)
+			return 0;
 	}
-	moutdwm(ast, 0x1E6E0084, data);
-
-} /* finetuneDQI */
-#endif
+	return 1;
+}
 
-static void finetuneDQI_L(struct ast_private *ast, struct ast2300_dram_param *param)
+static bool finetuneDQI_L(struct ast_private *ast, struct ast2300_dram_param *param)
 {
-	u32 gold_sadj[2], dllmin[16], dllmax[16], dlli, data, cnt, mask, passcnt;
-
+	u32 gold_sadj[2], dllmin[16], dllmax[16], dlli, data, cnt, mask, passcnt, retry = 0;
+	bool status = false;
 FINETUNE_START:
 	for (cnt = 0; cnt < 16; cnt++) {
 		dllmin[cnt] = 0xff;
@@ -690,16 +627,8 @@ FINETUNE_START:
 	}
 	passcnt = 0;
 	for (dlli = 0; dlli < 76; dlli++) {
-		moutdwm(ast, 0x1E6E0068, 0x00001400 | (dlli << 16) | (dlli << 24));
-		/* Wait DQSI latch phase calibration */
-		moutdwm(ast, 0x1E6E0074, 0x00000010);
-		moutdwm(ast, 0x1E6E0070, 0x00000003);
-		do {
-			data = mindwm(ast, 0x1E6E0070);
-		} while (!(data & 0x00001000));
-		moutdwm(ast, 0x1E6E0070, 0x00000000);
-
-		moutdwm(ast, 0x1E6E0074, CBR_SIZE1);
+		ast_moutdwm(ast, 0x1E6E0068, 0x00001400 | (dlli << 16) | (dlli << 24));
+		ast_moutdwm(ast, 0x1E6E0074, CBR_SIZE1);
 		data = cbr_scan2(ast);
 		if (data != 0) {
 			mask = 0x00010001;
@@ -727,9 +656,13 @@ FINETUNE_START:
 			passcnt++;
 		}
 	}
+	if (retry++ > 10)
+		goto FINETUNE_DONE;
 	if (passcnt != 16) {
 		goto FINETUNE_START;
 	}
+	status = true;
+FINETUNE_DONE:
 	gold_sadj[0] = gold_sadj[0] >> 4;
 	gold_sadj[1] = gold_sadj[0];
 
@@ -753,7 +686,7 @@ FINETUNE_START:
 			data |= dlli << 21;
 		}
 	}
-	moutdwm(ast, 0x1E6E0080, data);
+	ast_moutdwm(ast, 0x1E6E0080, data);
 
 	data = 0;
 	for (cnt = 8; cnt < 16; cnt++) {
@@ -778,162 +711,116 @@ FINETUNE_START:
 			data |= dlli << 21;
 		}
 	}
-	moutdwm(ast, 0x1E6E0084, data);
-
+	ast_moutdwm(ast, 0x1E6E0084, data);
+	return status;
 } /* finetuneDQI_L */
 
-static void finetuneDQI_L2(struct ast_private *ast, struct ast2300_dram_param *param)
+static void finetuneDQSI(struct ast_private *ast)
 {
-	u32 gold_sadj[2], dllmin[16], dllmax[16], dlli, data, cnt, mask, passcnt, data2;
+	u32 dlli, dqsip, dqidly;
+	u32 reg_mcr18, reg_mcr0c, passcnt[2], diff;
+	u32 g_dqidly, g_dqsip, g_margin, g_side;
+	u16 pass[32][2][2];
+	char tag[2][76];
+
+	/* Disable DQI CBR */
+	reg_mcr0c  = ast_mindwm(ast, 0x1E6E000C);
+	reg_mcr18  = ast_mindwm(ast, 0x1E6E0018);
+	reg_mcr18 &= 0x0000ffff;
+	ast_moutdwm(ast, 0x1E6E0018, reg_mcr18);
 
-	for (cnt = 0; cnt < 16; cnt++) {
-		dllmin[cnt] = 0xff;
-		dllmax[cnt] = 0x0;
-	}
-	passcnt = 0;
 	for (dlli = 0; dlli < 76; dlli++) {
-		moutdwm(ast, 0x1E6E0068, 0x00001400 | (dlli << 16) | (dlli << 24));
-		/* Wait DQSI latch phase calibration */
-		moutdwm(ast, 0x1E6E0074, 0x00000010);
-		moutdwm(ast, 0x1E6E0070, 0x00000003);
-		do {
-			data = mindwm(ast, 0x1E6E0070);
-		} while (!(data & 0x00001000));
-		moutdwm(ast, 0x1E6E0070, 0x00000000);
-
-		moutdwm(ast, 0x1E6E0074, CBR_SIZE2);
-		data = cbr_scan2(ast);
-		if (data != 0) {
-			mask = 0x00010001;
-			for (cnt = 0; cnt < 16; cnt++) {
-				if (data & mask) {
-					if (dllmin[cnt] > dlli) {
-						dllmin[cnt] = dlli;
-					}
-					if (dllmax[cnt] < dlli) {
-						dllmax[cnt] = dlli;
-					}
-				}
-				mask <<= 1;
-			}
-			passcnt++;
-		} else if (passcnt >= CBR_THRESHOLD2) {
-			break;
-		}
+		tag[0][dlli] = 0x0;
+		tag[1][dlli] = 0x0;
 	}
-	gold_sadj[0] = 0x0;
-	gold_sadj[1] = 0xFF;
-	for (cnt = 0; cnt < 8; cnt++) {
-		if ((dllmax[cnt] > dllmin[cnt]) && ((dllmax[cnt] - dllmin[cnt]) >= CBR_THRESHOLD2)) {
-			if (gold_sadj[0] < dllmin[cnt]) {
-				gold_sadj[0] = dllmin[cnt];
-			}
-			if (gold_sadj[1] > dllmax[cnt]) {
-				gold_sadj[1] = dllmax[cnt];
-			}
-		}
+	for (dqidly = 0; dqidly < 32; dqidly++) {
+		pass[dqidly][0][0] = 0xff;
+		pass[dqidly][0][1] = 0x0;
+		pass[dqidly][1][0] = 0xff;
+		pass[dqidly][1][1] = 0x0;
 	}
-	gold_sadj[0] = (gold_sadj[1] + gold_sadj[0]) >> 1;
-	gold_sadj[1] = mindwm(ast, 0x1E6E0080);
-
-	data = 0;
-	for (cnt = 0; cnt < 8; cnt++) {
-		data >>= 3;
-		data2 = gold_sadj[1] & 0x7;
-		gold_sadj[1] >>= 3;
-		if ((dllmax[cnt] > dllmin[cnt]) && ((dllmax[cnt] - dllmin[cnt]) >= CBR_THRESHOLD2)) {
-			dlli = (dllmin[cnt] + dllmax[cnt]) >> 1;
-			if (gold_sadj[0] >= dlli) {
-				dlli = (gold_sadj[0] - dlli) >> 1;
-				if (dlli > 0) {
-					dlli = 1;
-				}
-				if (data2 != 3) {
-					data2 = (data2 + dlli) & 0x7;
-				}
-			} else {
-				dlli = (dlli - gold_sadj[0]) >> 1;
-				if (dlli > 0) {
-					dlli = 1;
-				}
-				if (data2 != 4) {
-					data2 = (data2 - dlli) & 0x7;
+	for (dqidly = 0; dqidly < 32; dqidly++) {
+		passcnt[0] = passcnt[1] = 0;
+		for (dqsip = 0; dqsip < 2; dqsip++) {
+			ast_moutdwm(ast, 0x1E6E000C, 0);
+			ast_moutdwm(ast, 0x1E6E0018, reg_mcr18 | (dqidly << 16) | (dqsip << 23));
+			ast_moutdwm(ast, 0x1E6E000C, reg_mcr0c);
+			for (dlli = 0; dlli < 76; dlli++) {
+				ast_moutdwm(ast, 0x1E6E0068, 0x00001300 | (dlli << 16) | (dlli << 24));
+				ast_moutdwm(ast, 0x1E6E0070, 0);
+				ast_moutdwm(ast, 0x1E6E0074, CBR_SIZE0);
+				if (cbr_scan3(ast)) {
+					if (dlli == 0)
+						break;
+					passcnt[dqsip]++;
+					tag[dqsip][dlli] = 'P';
+					if (dlli < pass[dqidly][dqsip][0])
+						pass[dqidly][dqsip][0] = (u16) dlli;
+					if (dlli > pass[dqidly][dqsip][1])
+						pass[dqidly][dqsip][1] = (u16) dlli;
+				} else if (passcnt[dqsip] >= 5)
+					break;
+				else {
+					pass[dqidly][dqsip][0] = 0xff;
+					pass[dqidly][dqsip][1] = 0x0;
 				}
 			}
 		}
-		data |= data2 << 21;
-	}
-	moutdwm(ast, 0x1E6E0080, data);
-
-	gold_sadj[0] = 0x0;
-	gold_sadj[1] = 0xFF;
-	for (cnt = 8; cnt < 16; cnt++) {
-		if ((dllmax[cnt] > dllmin[cnt]) && ((dllmax[cnt] - dllmin[cnt]) >= CBR_THRESHOLD2)) {
-			if (gold_sadj[0] < dllmin[cnt]) {
-				gold_sadj[0] = dllmin[cnt];
-			}
-			if (gold_sadj[1] > dllmax[cnt]) {
-				gold_sadj[1] = dllmax[cnt];
-			}
-		}
+		if (passcnt[0] == 0 && passcnt[1] == 0)
+			dqidly++;
 	}
-	gold_sadj[0] = (gold_sadj[1] + gold_sadj[0]) >> 1;
-	gold_sadj[1] = mindwm(ast, 0x1E6E0084);
-
-	data = 0;
-	for (cnt = 8; cnt < 16; cnt++) {
-		data >>= 3;
-		data2 = gold_sadj[1] & 0x7;
-		gold_sadj[1] >>= 3;
-		if ((dllmax[cnt] > dllmin[cnt]) && ((dllmax[cnt] - dllmin[cnt]) >= CBR_THRESHOLD2)) {
-			dlli = (dllmin[cnt] + dllmax[cnt]) >> 1;
-			if (gold_sadj[0] >= dlli) {
-				dlli = (gold_sadj[0] - dlli) >> 1;
-				if (dlli > 0) {
-					dlli = 1;
-				}
-				if (data2 != 3) {
-					data2 = (data2 + dlli) & 0x7;
-				}
-			} else {
-				dlli = (dlli - gold_sadj[0]) >> 1;
-				if (dlli > 0) {
-					dlli = 1;
-				}
-				if (data2 != 4) {
-					data2 = (data2 - dlli) & 0x7;
-				}
+	/* Search margin */
+	g_dqidly = g_dqsip = g_margin = g_side = 0;
+
+	for (dqidly = 0; dqidly < 32; dqidly++) {
+		for (dqsip = 0; dqsip < 2; dqsip++) {
+			if (pass[dqidly][dqsip][0] > pass[dqidly][dqsip][1])
+				continue;
+			diff = pass[dqidly][dqsip][1] - pass[dqidly][dqsip][0];
+			if ((diff+2) < g_margin)
+				continue;
+			passcnt[0] = passcnt[1] = 0;
+			for (dlli = pass[dqidly][dqsip][0]; dlli > 0  && tag[dqsip][dlli] != 0; dlli--, passcnt[0]++);
+			for (dlli = pass[dqidly][dqsip][1]; dlli < 76 && tag[dqsip][dlli] != 0; dlli++, passcnt[1]++);
+			if (passcnt[0] > passcnt[1])
+				passcnt[0] = passcnt[1];
+			passcnt[1] = 0;
+			if (passcnt[0] > g_side)
+				passcnt[1] = passcnt[0] - g_side;
+			if (diff > (g_margin+1) && (passcnt[1] > 0 || passcnt[0] > 8)) {
+				g_margin = diff;
+				g_dqidly = dqidly;
+				g_dqsip  = dqsip;
+				g_side   = passcnt[0];
+			} else if (passcnt[1] > 1 && g_side < 8) {
+				if (diff > g_margin)
+					g_margin = diff;
+				g_dqidly = dqidly;
+				g_dqsip  = dqsip;
+				g_side   = passcnt[0];
 			}
 		}
-		data |= data2 << 21;
 	}
-	moutdwm(ast, 0x1E6E0084, data);
-
-} /* finetuneDQI_L2 */
+	reg_mcr18 = reg_mcr18 | (g_dqidly << 16) | (g_dqsip << 23);
+	ast_moutdwm(ast, 0x1E6E0018, reg_mcr18);
 
-static void cbr_dll2(struct ast_private *ast, struct ast2300_dram_param *param)
+}
+static bool cbr_dll2(struct ast_private *ast, struct ast2300_dram_param *param)
 {
-	u32 dllmin[2], dllmax[2], dlli, data, data2, passcnt;
+	u32 dllmin[2], dllmax[2], dlli, data, passcnt, retry = 0;
+	bool status = false;
 
-
-	finetuneDQI_L(ast, param);
-	finetuneDQI_L2(ast, param);
+	finetuneDQSI(ast);
+	if (finetuneDQI_L(ast, param) == false)
+		return status;
 
 CBR_START2:
 	dllmin[0] = dllmin[1] = 0xff;
 	dllmax[0] = dllmax[1] = 0x0;
 	passcnt = 0;
 	for (dlli = 0; dlli < 76; dlli++) {
-		moutdwm(ast, 0x1E6E0068, 0x00001300 | (dlli << 16) | (dlli << 24));
-		/* Wait DQSI latch phase calibration */
-		moutdwm(ast, 0x1E6E0074, 0x00000010);
-		moutdwm(ast, 0x1E6E0070, 0x00000003);
-		do {
-			data = mindwm(ast, 0x1E6E0070);
-		} while (!(data & 0x00001000));
-		moutdwm(ast, 0x1E6E0070, 0x00000000);
-
-		moutdwm(ast, 0x1E6E0074, CBR_SIZE2);
+		ast_moutdwm(ast, 0x1E6E0068, 0x00001300 | (dlli << 16) | (dlli << 24));
+		ast_moutdwm(ast, 0x1E6E0074, CBR_SIZE2);
 		data = cbr_scan(ast);
 		if (data != 0) {
 			if (data & 0x1) {
@@ -957,44 +844,31 @@ CBR_START2:
 			break;
 		}
 	}
+	if (retry++ > 10)
+		goto CBR_DONE2;
 	if (dllmax[0] == 0 || (dllmax[0]-dllmin[0]) < CBR_THRESHOLD) {
 		goto CBR_START2;
 	}
 	if (dllmax[1] == 0 || (dllmax[1]-dllmin[1]) < CBR_THRESHOLD) {
 		goto CBR_START2;
 	}
+	status = true;
+CBR_DONE2:
 	dlli  = (dllmin[1] + dllmax[1]) >> 1;
 	dlli <<= 8;
 	dlli += (dllmin[0] + dllmax[0]) >> 1;
-	moutdwm(ast, 0x1E6E0068, (mindwm(ast, 0x1E6E0068) & 0xFFFF) | (dlli << 16));
-
-	data  = (mindwm(ast, 0x1E6E0080) >> 24) & 0x1F;
-	data2 = (mindwm(ast, 0x1E6E0018) & 0xff80ffff) | (data << 16);
-	moutdwm(ast, 0x1E6E0018, data2);
-	moutdwm(ast, 0x1E6E0024, 0x8001 | (data << 1) | (param->dll2_finetune_step << 8));
-
-	/* Wait DQSI latch phase calibration */
-	moutdwm(ast, 0x1E6E0074, 0x00000010);
-	moutdwm(ast, 0x1E6E0070, 0x00000003);
-	do {
-		data = mindwm(ast, 0x1E6E0070);
-	} while (!(data & 0x00001000));
-	moutdwm(ast, 0x1E6E0070, 0x00000000);
-	moutdwm(ast, 0x1E6E0070, 0x00000003);
-	do {
-		data = mindwm(ast, 0x1E6E0070);
-	} while (!(data & 0x00001000));
-	moutdwm(ast, 0x1E6E0070, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0068, ast_mindwm(ast, 0x1E720058) | (dlli << 16));
+	return status;
 } /* CBRDLL2 */
 
 static void get_ddr3_info(struct ast_private *ast, struct ast2300_dram_param *param)
 {
 	u32 trap, trap_AC2, trap_MRS;
 
-	moutdwm(ast, 0x1E6E2000, 0x1688A8A8);
+	ast_moutdwm(ast, 0x1E6E2000, 0x1688A8A8);
 
 	/* Ger trap info */
-	trap = (mindwm(ast, 0x1E6E2070) >> 25) & 0x3;
+	trap = (ast_mindwm(ast, 0x1E6E2070) >> 25) & 0x3;
 	trap_AC2  = 0x00020000 + (trap << 16);
 	trap_AC2 |= 0x00300000 + ((trap & 0x2) << 19);
 	trap_MRS  = 0x00000010 + (trap << 4);
@@ -1008,22 +882,35 @@ static void get_ddr3_info(struct ast_private *ast, struct ast2300_dram_param *pa
 
 	switch (param->dram_freq) {
 	case 336:
-		moutdwm(ast, 0x1E6E2020, 0x0190);
+		ast_moutdwm(ast, 0x1E6E2020, 0x0190);
 		param->wodt          = 0;
 		param->reg_AC1       = 0x22202725;
 		param->reg_AC2       = 0xAA007613 | trap_AC2;
 		param->reg_DQSIC     = 0x000000BA;
 		param->reg_MRS       = 0x04001400 | trap_MRS;
 		param->reg_EMRS      = 0x00000000;
-		param->reg_IOZ       = 0x00000034;
+		param->reg_IOZ       = 0x00000023;
 		param->reg_DQIDLY    = 0x00000074;
 		param->reg_FREQ      = 0x00004DC0;
 		param->madj_max      = 96;
 		param->dll2_finetune_step = 3;
+		switch (param->dram_chipid) {
+		default:
+		case AST_DRAM_512Mx16:
+		case AST_DRAM_1Gx16:
+			param->reg_AC2   = 0xAA007613 | trap_AC2;
+			break;
+		case AST_DRAM_2Gx16:
+			param->reg_AC2   = 0xAA00761C | trap_AC2;
+			break;
+		case AST_DRAM_4Gx16:
+			param->reg_AC2   = 0xAA007636 | trap_AC2;
+			break;
+		}
 		break;
 	default:
 	case 396:
-		moutdwm(ast, 0x1E6E2020, 0x03F1);
+		ast_moutdwm(ast, 0x1E6E2020, 0x03F1);
 		param->wodt          = 1;
 		param->reg_AC1       = 0x33302825;
 		param->reg_AC2       = 0xCC009617 | trap_AC2;
@@ -1033,7 +920,7 @@ static void get_ddr3_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->reg_IOZ       = 0x00000034;
 		param->reg_DRV       = 0x000000FA;
 		param->reg_DQIDLY    = 0x00000089;
-		param->reg_FREQ      = 0x000050C0;
+		param->reg_FREQ      = 0x00005040;
 		param->madj_max      = 96;
 		param->dll2_finetune_step = 4;
 
@@ -1053,14 +940,14 @@ static void get_ddr3_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		break;
 
 	case 408:
-		moutdwm(ast, 0x1E6E2020, 0x01F0);
+		ast_moutdwm(ast, 0x1E6E2020, 0x01F0);
 		param->wodt          = 1;
 		param->reg_AC1       = 0x33302825;
 		param->reg_AC2       = 0xCC009617 | trap_AC2;
 		param->reg_DQSIC     = 0x000000E2;
 		param->reg_MRS       = 0x04001600 | trap_MRS;
 		param->reg_EMRS      = 0x00000000;
-		param->reg_IOZ       = 0x00000034;
+		param->reg_IOZ       = 0x00000023;
 		param->reg_DRV       = 0x000000FA;
 		param->reg_DQIDLY    = 0x00000089;
 		param->reg_FREQ      = 0x000050C0;
@@ -1083,7 +970,7 @@ static void get_ddr3_info(struct ast_private *ast, struct ast2300_dram_param *pa
 
 		break;
 	case 456:
-		moutdwm(ast, 0x1E6E2020, 0x0230);
+		ast_moutdwm(ast, 0x1E6E2020, 0x0230);
 		param->wodt          = 0;
 		param->reg_AC1       = 0x33302926;
 		param->reg_AC2       = 0xCD44961A;
@@ -1097,7 +984,7 @@ static void get_ddr3_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->dll2_finetune_step = 4;
 		break;
 	case 504:
-		moutdwm(ast, 0x1E6E2020, 0x0270);
+		ast_moutdwm(ast, 0x1E6E2020, 0x0270);
 		param->wodt          = 1;
 		param->reg_AC1       = 0x33302926;
 		param->reg_AC2       = 0xDE44A61D;
@@ -1111,7 +998,7 @@ static void get_ddr3_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->dll2_finetune_step = 4;
 		break;
 	case 528:
-		moutdwm(ast, 0x1E6E2020, 0x0290);
+		ast_moutdwm(ast, 0x1E6E2020, 0x0290);
 		param->wodt          = 1;
 		param->rodt          = 1;
 		param->reg_AC1       = 0x33302926;
@@ -1127,7 +1014,7 @@ static void get_ddr3_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->dll2_finetune_step = 3;
 		break;
 	case 576:
-		moutdwm(ast, 0x1E6E2020, 0x0140);
+		ast_moutdwm(ast, 0x1E6E2020, 0x0140);
 		param->reg_MADJ      = 0x00136868;
 		param->reg_SADJ      = 0x00004534;
 		param->wodt          = 1;
@@ -1145,7 +1032,7 @@ static void get_ddr3_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->dll2_finetune_step = 3;
 		break;
 	case 600:
-		moutdwm(ast, 0x1E6E2020, 0x02E1);
+		ast_moutdwm(ast, 0x1E6E2020, 0x02E1);
 		param->reg_MADJ      = 0x00136868;
 		param->reg_SADJ      = 0x00004534;
 		param->wodt          = 1;
@@ -1163,7 +1050,7 @@ static void get_ddr3_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->dll2_finetune_step = 3;
 		break;
 	case 624:
-		moutdwm(ast, 0x1E6E2020, 0x0160);
+		ast_moutdwm(ast, 0x1E6E2020, 0x0160);
 		param->reg_MADJ      = 0x00136868;
 		param->reg_SADJ      = 0x00004534;
 		param->wodt          = 1;
@@ -1218,106 +1105,98 @@ static void get_ddr3_info(struct ast_private *ast, struct ast2300_dram_param *pa
 
 static void ddr3_init(struct ast_private *ast, struct ast2300_dram_param *param)
 {
-	u32 data, data2;
+	u32 data, data2, retry = 0;
 
-	moutdwm(ast, 0x1E6E0000, 0xFC600309);
-	moutdwm(ast, 0x1E6E0018, 0x00000100);
-	moutdwm(ast, 0x1E6E0024, 0x00000000);
-	moutdwm(ast, 0x1E6E0034, 0x00000000);
+ddr3_init_start:
+	ast_moutdwm(ast, 0x1E6E0000, 0xFC600309);
+	ast_moutdwm(ast, 0x1E6E0018, 0x00000100);
+	ast_moutdwm(ast, 0x1E6E0024, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0034, 0x00000000);
 	udelay(10);
-	moutdwm(ast, 0x1E6E0064, param->reg_MADJ);
-	moutdwm(ast, 0x1E6E0068, param->reg_SADJ);
+	ast_moutdwm(ast, 0x1E6E0064, param->reg_MADJ);
+	ast_moutdwm(ast, 0x1E6E0068, param->reg_SADJ);
 	udelay(10);
-	moutdwm(ast, 0x1E6E0064, param->reg_MADJ | 0xC0000);
+	ast_moutdwm(ast, 0x1E6E0064, param->reg_MADJ | 0xC0000);
 	udelay(10);
 
-	moutdwm(ast, 0x1E6E0004, param->dram_config);
-	moutdwm(ast, 0x1E6E0008, 0x90040f);
-	moutdwm(ast, 0x1E6E0010, param->reg_AC1);
-	moutdwm(ast, 0x1E6E0014, param->reg_AC2);
-	moutdwm(ast, 0x1E6E0020, param->reg_DQSIC);
-	moutdwm(ast, 0x1E6E0080, 0x00000000);
-	moutdwm(ast, 0x1E6E0084, 0x00000000);
-	moutdwm(ast, 0x1E6E0088, param->reg_DQIDLY);
-	moutdwm(ast, 0x1E6E0018, 0x4040A170);
-	moutdwm(ast, 0x1E6E0018, 0x20402370);
-	moutdwm(ast, 0x1E6E0038, 0x00000000);
-	moutdwm(ast, 0x1E6E0040, 0xFF444444);
-	moutdwm(ast, 0x1E6E0044, 0x22222222);
-	moutdwm(ast, 0x1E6E0048, 0x22222222);
-	moutdwm(ast, 0x1E6E004C, 0x00000002);
-	moutdwm(ast, 0x1E6E0050, 0x80000000);
-	moutdwm(ast, 0x1E6E0050, 0x00000000);
-	moutdwm(ast, 0x1E6E0054, 0);
-	moutdwm(ast, 0x1E6E0060, param->reg_DRV);
-	moutdwm(ast, 0x1E6E006C, param->reg_IOZ);
-	moutdwm(ast, 0x1E6E0070, 0x00000000);
-	moutdwm(ast, 0x1E6E0074, 0x00000000);
-	moutdwm(ast, 0x1E6E0078, 0x00000000);
-	moutdwm(ast, 0x1E6E007C, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0004, param->dram_config);
+	ast_moutdwm(ast, 0x1E6E0008, 0x90040f);
+	ast_moutdwm(ast, 0x1E6E0010, param->reg_AC1);
+	ast_moutdwm(ast, 0x1E6E0014, param->reg_AC2);
+	ast_moutdwm(ast, 0x1E6E0020, param->reg_DQSIC);
+	ast_moutdwm(ast, 0x1E6E0080, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0084, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0088, param->reg_DQIDLY);
+	ast_moutdwm(ast, 0x1E6E0018, 0x4000A170);
+	ast_moutdwm(ast, 0x1E6E0018, 0x00002370);
+	ast_moutdwm(ast, 0x1E6E0038, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0040, 0xFF444444);
+	ast_moutdwm(ast, 0x1E6E0044, 0x22222222);
+	ast_moutdwm(ast, 0x1E6E0048, 0x22222222);
+	ast_moutdwm(ast, 0x1E6E004C, 0x00000002);
+	ast_moutdwm(ast, 0x1E6E0050, 0x80000000);
+	ast_moutdwm(ast, 0x1E6E0050, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0054, 0);
+	ast_moutdwm(ast, 0x1E6E0060, param->reg_DRV);
+	ast_moutdwm(ast, 0x1E6E006C, param->reg_IOZ);
+	ast_moutdwm(ast, 0x1E6E0070, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0074, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0078, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E007C, 0x00000000);
 	/* Wait MCLK2X lock to MCLK */
 	do {
-		data = mindwm(ast, 0x1E6E001C);
+		data = ast_mindwm(ast, 0x1E6E001C);
 	} while (!(data & 0x08000000));
-	moutdwm(ast, 0x1E6E0034, 0x00000001);
-	moutdwm(ast, 0x1E6E000C, 0x00005C04);
-	udelay(10);
-	moutdwm(ast, 0x1E6E000C, 0x00000000);
-	moutdwm(ast, 0x1E6E0034, 0x00000000);
-	data = mindwm(ast, 0x1E6E001C);
+	data = ast_mindwm(ast, 0x1E6E001C);
 	data = (data >> 8) & 0xff;
 	while ((data & 0x08) || ((data & 0x7) < 2) || (data < 4)) {
-		data2 = (mindwm(ast, 0x1E6E0064) & 0xfff3ffff) + 4;
+		data2 = (ast_mindwm(ast, 0x1E6E0064) & 0xfff3ffff) + 4;
 		if ((data2 & 0xff) > param->madj_max) {
 			break;
 		}
-		moutdwm(ast, 0x1E6E0064, data2);
+		ast_moutdwm(ast, 0x1E6E0064, data2);
 		if (data2 & 0x00100000) {
 			data2 = ((data2 & 0xff) >> 3) + 3;
 		} else {
 			data2 = ((data2 & 0xff) >> 2) + 5;
 		}
-		data = mindwm(ast, 0x1E6E0068) & 0xffff00ff;
+		data = ast_mindwm(ast, 0x1E6E0068) & 0xffff00ff;
 		data2 += data & 0xff;
 		data = data | (data2 << 8);
-		moutdwm(ast, 0x1E6E0068, data);
+		ast_moutdwm(ast, 0x1E6E0068, data);
 		udelay(10);
-		moutdwm(ast, 0x1E6E0064, mindwm(ast, 0x1E6E0064) | 0xC0000);
+		ast_moutdwm(ast, 0x1E6E0064, ast_mindwm(ast, 0x1E6E0064) | 0xC0000);
 		udelay(10);
-		data = mindwm(ast, 0x1E6E0018) & 0xfffff1ff;
-		moutdwm(ast, 0x1E6E0018, data);
+		data = ast_mindwm(ast, 0x1E6E0018) & 0xfffff1ff;
+		ast_moutdwm(ast, 0x1E6E0018, data);
 		data = data | 0x200;
-		moutdwm(ast, 0x1E6E0018, data);
+		ast_moutdwm(ast, 0x1E6E0018, data);
 		do {
-			data = mindwm(ast, 0x1E6E001C);
+			data = ast_mindwm(ast, 0x1E6E001C);
 		} while (!(data & 0x08000000));
 
-		moutdwm(ast, 0x1E6E0034, 0x00000001);
-		moutdwm(ast, 0x1E6E000C, 0x00005C04);
-		udelay(10);
-		moutdwm(ast, 0x1E6E000C, 0x00000000);
-		moutdwm(ast, 0x1E6E0034, 0x00000000);
-		data = mindwm(ast, 0x1E6E001C);
+		data = ast_mindwm(ast, 0x1E6E001C);
 		data = (data >> 8) & 0xff;
 	}
-	data = mindwm(ast, 0x1E6E0018) | 0xC00;
-	moutdwm(ast, 0x1E6E0018, data);
+	ast_moutdwm(ast, 0x1E720058, ast_mindwm(ast, 0x1E6E0068) & 0xffff);
+	data = ast_mindwm(ast, 0x1E6E0018) | 0xC00;
+	ast_moutdwm(ast, 0x1E6E0018, data);
 
-	moutdwm(ast, 0x1E6E0034, 0x00000001);
-	moutdwm(ast, 0x1E6E000C, 0x00000040);
+	ast_moutdwm(ast, 0x1E6E0034, 0x00000001);
+	ast_moutdwm(ast, 0x1E6E000C, 0x00000040);
 	udelay(50);
 	/* Mode Register Setting */
-	moutdwm(ast, 0x1E6E002C, param->reg_MRS | 0x100);
-	moutdwm(ast, 0x1E6E0030, param->reg_EMRS);
-	moutdwm(ast, 0x1E6E0028, 0x00000005);
-	moutdwm(ast, 0x1E6E0028, 0x00000007);
-	moutdwm(ast, 0x1E6E0028, 0x00000003);
-	moutdwm(ast, 0x1E6E0028, 0x00000001);
-	moutdwm(ast, 0x1E6E002C, param->reg_MRS);
-	moutdwm(ast, 0x1E6E000C, 0x00005C08);
-	moutdwm(ast, 0x1E6E0028, 0x00000001);
-
-	moutdwm(ast, 0x1E6E000C, 0x7FFF5C01);
+	ast_moutdwm(ast, 0x1E6E002C, param->reg_MRS | 0x100);
+	ast_moutdwm(ast, 0x1E6E0030, param->reg_EMRS);
+	ast_moutdwm(ast, 0x1E6E0028, 0x00000005);
+	ast_moutdwm(ast, 0x1E6E0028, 0x00000007);
+	ast_moutdwm(ast, 0x1E6E0028, 0x00000003);
+	ast_moutdwm(ast, 0x1E6E0028, 0x00000001);
+	ast_moutdwm(ast, 0x1E6E002C, param->reg_MRS);
+	ast_moutdwm(ast, 0x1E6E000C, 0x00005C08);
+	ast_moutdwm(ast, 0x1E6E0028, 0x00000001);
+
+	ast_moutdwm(ast, 0x1E6E000C, 0x00005C01);
 	data = 0;
 	if (param->wodt) {
 		data = 0x300;
@@ -1325,30 +1204,23 @@ static void ddr3_init(struct ast_private *ast, struct ast2300_dram_param *param)
 	if (param->rodt) {
 		data = data | 0x3000 | ((param->reg_AC2 & 0x60000) >> 3);
 	}
-	moutdwm(ast, 0x1E6E0034, data | 0x3);
+	ast_moutdwm(ast, 0x1E6E0034, data | 0x3);
 
-	/* Wait DQI delay lock */
-	do {
-		data = mindwm(ast, 0x1E6E0080);
-	} while (!(data & 0x40000000));
-	/* Wait DQSI delay lock */
-	do {
-		data = mindwm(ast, 0x1E6E0020);
-	} while (!(data & 0x00000800));
 	/* Calibrate the DQSI delay */
-	cbr_dll2(ast, param);
+	if ((cbr_dll2(ast, param) == false) && (retry++ < 10))
+		goto ddr3_init_start;
 
-	moutdwm(ast, 0x1E6E0120, param->reg_FREQ);
+	ast_moutdwm(ast, 0x1E6E0120, param->reg_FREQ);
 	/* ECC Memory Initialization */
 #ifdef ECC
-	moutdwm(ast, 0x1E6E007C, 0x00000000);
-	moutdwm(ast, 0x1E6E0070, 0x221);
+	ast_moutdwm(ast, 0x1E6E007C, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0070, 0x221);
 	do {
-		data = mindwm(ast, 0x1E6E0070);
+		data = ast_mindwm(ast, 0x1E6E0070);
 	} while (!(data & 0x00001000));
-	moutdwm(ast, 0x1E6E0070, 0x00000000);
-	moutdwm(ast, 0x1E6E0050, 0x80000000);
-	moutdwm(ast, 0x1E6E0050, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0070, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0050, 0x80000000);
+	ast_moutdwm(ast, 0x1E6E0050, 0x00000000);
 #endif
 
 
@@ -1358,10 +1230,10 @@ static void get_ddr2_info(struct ast_private *ast, struct ast2300_dram_param *pa
 {
 	u32 trap, trap_AC2, trap_MRS;
 
-	moutdwm(ast, 0x1E6E2000, 0x1688A8A8);
+	ast_moutdwm(ast, 0x1E6E2000, 0x1688A8A8);
 
 	/* Ger trap info */
-	trap = (mindwm(ast, 0x1E6E2070) >> 25) & 0x3;
+	trap = (ast_mindwm(ast, 0x1E6E2070) >> 25) & 0x3;
 	trap_AC2  = (trap << 20) | (trap << 16);
 	trap_AC2 += 0x00110000;
 	trap_MRS  = 0x00000040 | (trap << 4);
@@ -1375,7 +1247,7 @@ static void get_ddr2_info(struct ast_private *ast, struct ast2300_dram_param *pa
 
 	switch (param->dram_freq) {
 	case 264:
-		moutdwm(ast, 0x1E6E2020, 0x0130);
+		ast_moutdwm(ast, 0x1E6E2020, 0x0130);
 		param->wodt          = 0;
 		param->reg_AC1       = 0x11101513;
 		param->reg_AC2       = 0x78117011;
@@ -1390,7 +1262,7 @@ static void get_ddr2_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->dll2_finetune_step = 3;
 		break;
 	case 336:
-		moutdwm(ast, 0x1E6E2020, 0x0190);
+		ast_moutdwm(ast, 0x1E6E2020, 0x0190);
 		param->wodt          = 1;
 		param->reg_AC1       = 0x22202613;
 		param->reg_AC2       = 0xAA009016 | trap_AC2;
@@ -1403,10 +1275,25 @@ static void get_ddr2_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->reg_FREQ      = 0x00004DC0;
 		param->madj_max      = 96;
 		param->dll2_finetune_step = 3;
+		switch (param->dram_chipid) {
+		default:
+		case AST_DRAM_512Mx16:
+			param->reg_AC2   = 0xAA009012 | trap_AC2;
+			break;
+		case AST_DRAM_1Gx16:
+			param->reg_AC2   = 0xAA009016 | trap_AC2;
+			break;
+		case AST_DRAM_2Gx16:
+			param->reg_AC2   = 0xAA009023 | trap_AC2;
+			break;
+		case AST_DRAM_4Gx16:
+			param->reg_AC2   = 0xAA00903B | trap_AC2;
+			break;
+		}
 		break;
 	default:
 	case 396:
-		moutdwm(ast, 0x1E6E2020, 0x03F1);
+		ast_moutdwm(ast, 0x1E6E2020, 0x03F1);
 		param->wodt          = 1;
 		param->rodt          = 0;
 		param->reg_AC1       = 0x33302714;
@@ -1417,7 +1304,7 @@ static void get_ddr2_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->reg_DRV       = 0x000000FA;
 		param->reg_IOZ       = 0x00000034;
 		param->reg_DQIDLY    = 0x00000089;
-		param->reg_FREQ      = 0x000050C0;
+		param->reg_FREQ      = 0x00005040;
 		param->madj_max      = 96;
 		param->dll2_finetune_step = 4;
 
@@ -1440,7 +1327,7 @@ static void get_ddr2_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		break;
 
 	case 408:
-		moutdwm(ast, 0x1E6E2020, 0x01F0);
+		ast_moutdwm(ast, 0x1E6E2020, 0x01F0);
 		param->wodt          = 1;
 		param->rodt          = 0;
 		param->reg_AC1       = 0x33302714;
@@ -1473,7 +1360,7 @@ static void get_ddr2_info(struct ast_private *ast, struct ast2300_dram_param *pa
 
 		break;
 	case 456:
-		moutdwm(ast, 0x1E6E2020, 0x0230);
+		ast_moutdwm(ast, 0x1E6E2020, 0x0230);
 		param->wodt          = 0;
 		param->reg_AC1       = 0x33302815;
 		param->reg_AC2       = 0xCD44B01E;
@@ -1488,7 +1375,7 @@ static void get_ddr2_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->dll2_finetune_step = 3;
 		break;
 	case 504:
-		moutdwm(ast, 0x1E6E2020, 0x0261);
+		ast_moutdwm(ast, 0x1E6E2020, 0x0261);
 		param->wodt          = 1;
 		param->rodt          = 1;
 		param->reg_AC1       = 0x33302815;
@@ -1504,7 +1391,7 @@ static void get_ddr2_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->dll2_finetune_step = 3;
 		break;
 	case 528:
-		moutdwm(ast, 0x1E6E2020, 0x0120);
+		ast_moutdwm(ast, 0x1E6E2020, 0x0120);
 		param->wodt          = 1;
 		param->rodt          = 1;
 		param->reg_AC1       = 0x33302815;
@@ -1520,7 +1407,7 @@ static void get_ddr2_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->dll2_finetune_step = 3;
 		break;
 	case 552:
-		moutdwm(ast, 0x1E6E2020, 0x02A1);
+		ast_moutdwm(ast, 0x1E6E2020, 0x02A1);
 		param->wodt          = 1;
 		param->rodt          = 1;
 		param->reg_AC1       = 0x43402915;
@@ -1536,7 +1423,7 @@ static void get_ddr2_info(struct ast_private *ast, struct ast2300_dram_param *pa
 		param->dll2_finetune_step = 3;
 		break;
 	case 576:
-		moutdwm(ast, 0x1E6E2020, 0x0140);
+		ast_moutdwm(ast, 0x1E6E2020, 0x0140);
 		param->wodt          = 1;
 		param->rodt          = 1;
 		param->reg_AC1       = 0x43402915;
@@ -1588,110 +1475,102 @@ static void get_ddr2_info(struct ast_private *ast, struct ast2300_dram_param *pa
 
 static void ddr2_init(struct ast_private *ast, struct ast2300_dram_param *param)
 {
-	u32 data, data2;
-
-	moutdwm(ast, 0x1E6E0000, 0xFC600309);
-	moutdwm(ast, 0x1E6E0018, 0x00000100);
-	moutdwm(ast, 0x1E6E0024, 0x00000000);
-	moutdwm(ast, 0x1E6E0064, param->reg_MADJ);
-	moutdwm(ast, 0x1E6E0068, param->reg_SADJ);
+	u32 data, data2, retry = 0;
+
+ddr2_init_start:
+	ast_moutdwm(ast, 0x1E6E0000, 0xFC600309);
+	ast_moutdwm(ast, 0x1E6E0018, 0x00000100);
+	ast_moutdwm(ast, 0x1E6E0024, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0064, param->reg_MADJ);
+	ast_moutdwm(ast, 0x1E6E0068, param->reg_SADJ);
 	udelay(10);
-	moutdwm(ast, 0x1E6E0064, param->reg_MADJ | 0xC0000);
+	ast_moutdwm(ast, 0x1E6E0064, param->reg_MADJ | 0xC0000);
 	udelay(10);
 
-	moutdwm(ast, 0x1E6E0004, param->dram_config);
-	moutdwm(ast, 0x1E6E0008, 0x90040f);
-	moutdwm(ast, 0x1E6E0010, param->reg_AC1);
-	moutdwm(ast, 0x1E6E0014, param->reg_AC2);
-	moutdwm(ast, 0x1E6E0020, param->reg_DQSIC);
-	moutdwm(ast, 0x1E6E0080, 0x00000000);
-	moutdwm(ast, 0x1E6E0084, 0x00000000);
-	moutdwm(ast, 0x1E6E0088, param->reg_DQIDLY);
-	moutdwm(ast, 0x1E6E0018, 0x4040A130);
-	moutdwm(ast, 0x1E6E0018, 0x20402330);
-	moutdwm(ast, 0x1E6E0038, 0x00000000);
-	moutdwm(ast, 0x1E6E0040, 0xFF808000);
-	moutdwm(ast, 0x1E6E0044, 0x88848466);
-	moutdwm(ast, 0x1E6E0048, 0x44440008);
-	moutdwm(ast, 0x1E6E004C, 0x00000000);
-	moutdwm(ast, 0x1E6E0050, 0x80000000);
-	moutdwm(ast, 0x1E6E0050, 0x00000000);
-	moutdwm(ast, 0x1E6E0054, 0);
-	moutdwm(ast, 0x1E6E0060, param->reg_DRV);
-	moutdwm(ast, 0x1E6E006C, param->reg_IOZ);
-	moutdwm(ast, 0x1E6E0070, 0x00000000);
-	moutdwm(ast, 0x1E6E0074, 0x00000000);
-	moutdwm(ast, 0x1E6E0078, 0x00000000);
-	moutdwm(ast, 0x1E6E007C, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0004, param->dram_config);
+	ast_moutdwm(ast, 0x1E6E0008, 0x90040f);
+	ast_moutdwm(ast, 0x1E6E0010, param->reg_AC1);
+	ast_moutdwm(ast, 0x1E6E0014, param->reg_AC2);
+	ast_moutdwm(ast, 0x1E6E0020, param->reg_DQSIC);
+	ast_moutdwm(ast, 0x1E6E0080, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0084, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0088, param->reg_DQIDLY);
+	ast_moutdwm(ast, 0x1E6E0018, 0x4000A130);
+	ast_moutdwm(ast, 0x1E6E0018, 0x00002330);
+	ast_moutdwm(ast, 0x1E6E0038, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0040, 0xFF808000);
+	ast_moutdwm(ast, 0x1E6E0044, 0x88848466);
+	ast_moutdwm(ast, 0x1E6E0048, 0x44440008);
+	ast_moutdwm(ast, 0x1E6E004C, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0050, 0x80000000);
+	ast_moutdwm(ast, 0x1E6E0050, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0054, 0);
+	ast_moutdwm(ast, 0x1E6E0060, param->reg_DRV);
+	ast_moutdwm(ast, 0x1E6E006C, param->reg_IOZ);
+	ast_moutdwm(ast, 0x1E6E0070, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0074, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0078, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E007C, 0x00000000);
 
 	/* Wait MCLK2X lock to MCLK */
 	do {
-		data = mindwm(ast, 0x1E6E001C);
+		data = ast_mindwm(ast, 0x1E6E001C);
 	} while (!(data & 0x08000000));
-	moutdwm(ast, 0x1E6E0034, 0x00000001);
-	moutdwm(ast, 0x1E6E000C, 0x00005C04);
-	udelay(10);
-	moutdwm(ast, 0x1E6E000C, 0x00000000);
-	moutdwm(ast, 0x1E6E0034, 0x00000000);
-	data = mindwm(ast, 0x1E6E001C);
+	data = ast_mindwm(ast, 0x1E6E001C);
 	data = (data >> 8) & 0xff;
 	while ((data & 0x08) || ((data & 0x7) < 2) || (data < 4)) {
-		data2 = (mindwm(ast, 0x1E6E0064) & 0xfff3ffff) + 4;
+		data2 = (ast_mindwm(ast, 0x1E6E0064) & 0xfff3ffff) + 4;
 		if ((data2 & 0xff) > param->madj_max) {
 			break;
 		}
-		moutdwm(ast, 0x1E6E0064, data2);
+		ast_moutdwm(ast, 0x1E6E0064, data2);
 		if (data2 & 0x00100000) {
 			data2 = ((data2 & 0xff) >> 3) + 3;
 		} else {
 			data2 = ((data2 & 0xff) >> 2) + 5;
 		}
-		data = mindwm(ast, 0x1E6E0068) & 0xffff00ff;
+		data = ast_mindwm(ast, 0x1E6E0068) & 0xffff00ff;
 		data2 += data & 0xff;
 		data = data | (data2 << 8);
-		moutdwm(ast, 0x1E6E0068, data);
+		ast_moutdwm(ast, 0x1E6E0068, data);
 		udelay(10);
-		moutdwm(ast, 0x1E6E0064, mindwm(ast, 0x1E6E0064) | 0xC0000);
+		ast_moutdwm(ast, 0x1E6E0064, ast_mindwm(ast, 0x1E6E0064) | 0xC0000);
 		udelay(10);
-		data = mindwm(ast, 0x1E6E0018) & 0xfffff1ff;
-		moutdwm(ast, 0x1E6E0018, data);
+		data = ast_mindwm(ast, 0x1E6E0018) & 0xfffff1ff;
+		ast_moutdwm(ast, 0x1E6E0018, data);
 		data = data | 0x200;
-		moutdwm(ast, 0x1E6E0018, data);
+		ast_moutdwm(ast, 0x1E6E0018, data);
 		do {
-			data = mindwm(ast, 0x1E6E001C);
+			data = ast_mindwm(ast, 0x1E6E001C);
 		} while (!(data & 0x08000000));
 
-		moutdwm(ast, 0x1E6E0034, 0x00000001);
-		moutdwm(ast, 0x1E6E000C, 0x00005C04);
-		udelay(10);
-		moutdwm(ast, 0x1E6E000C, 0x00000000);
-		moutdwm(ast, 0x1E6E0034, 0x00000000);
-		data = mindwm(ast, 0x1E6E001C);
+		data = ast_mindwm(ast, 0x1E6E001C);
 		data = (data >> 8) & 0xff;
 	}
-	data = mindwm(ast, 0x1E6E0018) | 0xC00;
-	moutdwm(ast, 0x1E6E0018, data);
+	ast_moutdwm(ast, 0x1E720058, ast_mindwm(ast, 0x1E6E0008) & 0xffff);
+	data = ast_mindwm(ast, 0x1E6E0018) | 0xC00;
+	ast_moutdwm(ast, 0x1E6E0018, data);
 
-	moutdwm(ast, 0x1E6E0034, 0x00000001);
-	moutdwm(ast, 0x1E6E000C, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0034, 0x00000001);
+	ast_moutdwm(ast, 0x1E6E000C, 0x00000000);
 	udelay(50);
 	/* Mode Register Setting */
-	moutdwm(ast, 0x1E6E002C, param->reg_MRS | 0x100);
-	moutdwm(ast, 0x1E6E0030, param->reg_EMRS);
-	moutdwm(ast, 0x1E6E0028, 0x00000005);
-	moutdwm(ast, 0x1E6E0028, 0x00000007);
-	moutdwm(ast, 0x1E6E0028, 0x00000003);
-	moutdwm(ast, 0x1E6E0028, 0x00000001);
-
-	moutdwm(ast, 0x1E6E000C, 0x00005C08);
-	moutdwm(ast, 0x1E6E002C, param->reg_MRS);
-	moutdwm(ast, 0x1E6E0028, 0x00000001);
-	moutdwm(ast, 0x1E6E0030, param->reg_EMRS | 0x380);
-	moutdwm(ast, 0x1E6E0028, 0x00000003);
-	moutdwm(ast, 0x1E6E0030, param->reg_EMRS);
-	moutdwm(ast, 0x1E6E0028, 0x00000003);
-
-	moutdwm(ast, 0x1E6E000C, 0x7FFF5C01);
+	ast_moutdwm(ast, 0x1E6E002C, param->reg_MRS | 0x100);
+	ast_moutdwm(ast, 0x1E6E0030, param->reg_EMRS);
+	ast_moutdwm(ast, 0x1E6E0028, 0x00000005);
+	ast_moutdwm(ast, 0x1E6E0028, 0x00000007);
+	ast_moutdwm(ast, 0x1E6E0028, 0x00000003);
+	ast_moutdwm(ast, 0x1E6E0028, 0x00000001);
+
+	ast_moutdwm(ast, 0x1E6E000C, 0x00005C08);
+	ast_moutdwm(ast, 0x1E6E002C, param->reg_MRS);
+	ast_moutdwm(ast, 0x1E6E0028, 0x00000001);
+	ast_moutdwm(ast, 0x1E6E0030, param->reg_EMRS | 0x380);
+	ast_moutdwm(ast, 0x1E6E0028, 0x00000003);
+	ast_moutdwm(ast, 0x1E6E0030, param->reg_EMRS);
+	ast_moutdwm(ast, 0x1E6E0028, 0x00000003);
+
+	ast_moutdwm(ast, 0x1E6E000C, 0x7FFF5C01);
 	data = 0;
 	if (param->wodt) {
 		data = 0x500;
@@ -1699,30 +1578,23 @@ static void ddr2_init(struct ast_private *ast, struct ast2300_dram_param *param)
 	if (param->rodt) {
 		data = data | 0x3000 | ((param->reg_AC2 & 0x60000) >> 3);
 	}
-	moutdwm(ast, 0x1E6E0034, data | 0x3);
-	moutdwm(ast, 0x1E6E0120, param->reg_FREQ);
+	ast_moutdwm(ast, 0x1E6E0034, data | 0x3);
+	ast_moutdwm(ast, 0x1E6E0120, param->reg_FREQ);
 
-	/* Wait DQI delay lock */
-	do {
-		data = mindwm(ast, 0x1E6E0080);
-	} while (!(data & 0x40000000));
-	/* Wait DQSI delay lock */
-	do {
-		data = mindwm(ast, 0x1E6E0020);
-	} while (!(data & 0x00000800));
 	/* Calibrate the DQSI delay */
-	cbr_dll2(ast, param);
+	if ((cbr_dll2(ast, param) == false) && (retry++ < 10))
+		goto ddr2_init_start;
 
 	/* ECC Memory Initialization */
 #ifdef ECC
-	moutdwm(ast, 0x1E6E007C, 0x00000000);
-	moutdwm(ast, 0x1E6E0070, 0x221);
+	ast_moutdwm(ast, 0x1E6E007C, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0070, 0x221);
 	do {
-		data = mindwm(ast, 0x1E6E0070);
+		data = ast_mindwm(ast, 0x1E6E0070);
 	} while (!(data & 0x00001000));
-	moutdwm(ast, 0x1E6E0070, 0x00000000);
-	moutdwm(ast, 0x1E6E0050, 0x80000000);
-	moutdwm(ast, 0x1E6E0050, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0070, 0x00000000);
+	ast_moutdwm(ast, 0x1E6E0050, 0x80000000);
+	ast_moutdwm(ast, 0x1E6E0050, 0x00000000);
 #endif
 
 }
@@ -1768,8 +1640,8 @@ static void ast_init_dram_2300(struct drm_device *dev)
 			ddr2_init(ast, &param);
 		}
 
-		temp = mindwm(ast, 0x1e6e2040);
-		moutdwm(ast, 0x1e6e2040, temp | 0x40);
+		temp = ast_mindwm(ast, 0x1e6e2040);
+		ast_moutdwm(ast, 0x1e6e2040, temp | 0x40);
 	}
 
 	/* wait ready */

drivers/gpu/drm/ast/ast_tables.h

@@ -42,7 +42,7 @@
 #define HBorder                 0x00000020
 #define VBorder                 0x00000010
 #define WideScreenMode		0x00000100
-
+#define NewModeInfo		0x00000200
 
 /* DCLK Index */
 #define VCLK25_175     		0x00
@@ -67,6 +67,11 @@
 #define VCLK106_5   		0x12
 #define VCLK146_25  		0x13
 #define VCLK148_5   		0x14
+#define VCLK71      		0x15
+#define VCLK88_75   		0x16
+#define VCLK119     		0x17
+#define VCLK85_5     		0x18
+#define VCLK97_75     		0x19
 
 static struct ast_vbios_dclk_info dclk_table[] = {
 	{0x2C, 0xE7, 0x03},					/* 00: VCLK25_175	*/
@@ -90,6 +95,10 @@ static struct ast_vbios_dclk_info dclk_table[] = {
 	{0x28, 0x49, 0x80},					/* 12: VCLK106.5        */
 	{0x37, 0x49, 0x80},					/* 13: VCLK146.25       */
 	{0x1f, 0x45, 0x80},					/* 14: VCLK148.5        */
+	{0x47, 0x6c, 0x80},					/* 15: VCLK71       */
+	{0x25, 0x65, 0x80},					/* 16: VCLK88.75    */
+	{0x77, 0x58, 0x80},					/* 17: VCLK119      */
+	{0x32, 0x67, 0x80},				    /* 18: VCLK85_5     */
 };
 
 static struct ast_vbios_stdtable vbios_stdtable[] = {
@@ -225,41 +234,63 @@ static struct ast_vbios_enhtable res_1600x1200[] = {
 	 (SyncPP | Charx8Dot), 0xFF, 1, 0x33 },
 };
 
-static struct ast_vbios_enhtable res_1920x1200[] = {
-	{2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154,	/* 60Hz */
-	 (SyncNP | Charx8Dot), 60, 1, 0x34 },
-	{2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154,	/* 60Hz */
-	 (SyncNP | Charx8Dot), 0xFF, 1, 0x34 },
+/* 16:9 */
+static struct ast_vbios_enhtable res_1360x768[] = {
+	{1792, 1360, 64,112, 795,  768, 3, 6, VCLK85_5,	         /* 60Hz */
+	 (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x39 },
+	{1792, 1360, 64,112, 795,  768, 3, 6, VCLK85_5,	         /* end */
+	 (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x39 },
+};
+
+static struct ast_vbios_enhtable res_1600x900[] = {
+	{1760, 1600, 48, 32, 926,  900, 3, 5, VCLK97_75,	/* 60Hz CVT RB */
+	 (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x3A },
+	{1760, 1600, 48, 32, 926,  900, 3, 5, VCLK97_75,	/* end */
+	 (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x3A }
 };
 
+static struct ast_vbios_enhtable res_1920x1080[] = {
+	{2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5,	/* 60Hz */
+	 (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x38 },
+	{2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5,	/* 60Hz */
+	 (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x38 },
+};
+
+
 /* 16:10 */
 static struct ast_vbios_enhtable res_1280x800[] = {
+	{1440, 1280, 48, 32,  823,  800, 3, 6, VCLK71,	/* 60Hz RB */
+	 (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 35 },
 	{1680, 1280, 72,128,  831,  800, 3, 6, VCLK83_5,	/* 60Hz */
-	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode), 60, 1, 0x35 },
+	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x35 },
 	{1680, 1280, 72,128,  831,  800, 3, 6, VCLK83_5,	/* 60Hz */
-	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode), 0xFF, 1, 0x35 },
+	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x35 },
 
 };
 
 static struct ast_vbios_enhtable res_1440x900[] = {
+	{1600, 1440, 48, 32,  926,  900, 3, 6, VCLK88_75,	/* 60Hz RB */
+	 (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x36 },
 	{1904, 1440, 80,152,  934,  900, 3, 6, VCLK106_5,	/* 60Hz */
-	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode), 60, 1, 0x36 },
+	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x36 },
 	{1904, 1440, 80,152,  934,  900, 3, 6, VCLK106_5,	/* 60Hz */
-	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode), 0xFF, 1, 0x36 },
+	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x36 },
 };
 
 static struct ast_vbios_enhtable res_1680x1050[] = {
+	{1840, 1680, 48, 32, 1080, 1050, 3, 6, VCLK119,	/* 60Hz RB */
+	 (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x37 },
 	{2240, 1680,104,176, 1089, 1050, 3, 6, VCLK146_25,	/* 60Hz */
-	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode), 60, 1, 0x37 },
+	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x37 },
 	{2240, 1680,104,176, 1089, 1050, 3, 6, VCLK146_25,	/* 60Hz */
-	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode), 0xFF, 1, 0x37 },
+	 (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x37 },
 };
 
-/* HDTV */
-static struct ast_vbios_enhtable res_1920x1080[] = {
-	{2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5,	/* 60Hz */
-	 (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode), 60, 1, 0x38 },
-	{2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5,	/* 60Hz */
-	 (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode), 0xFF, 1, 0x38 },
+static struct ast_vbios_enhtable res_1920x1200[] = {
+	{2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154,	/* 60Hz */
+	 (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x34 },
+	{2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154,	/* 60Hz */
+	 (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x34 },
 };
+
 #endif

drivers/gpu/drm/bridge/ptn3460.c

@@ -225,12 +225,6 @@ out:
 	return num_modes;
 }
 
-static int ptn3460_mode_valid(struct drm_connector *connector,
-		struct drm_display_mode *mode)
-{
-	return MODE_OK;
-}
-
 struct drm_encoder *ptn3460_best_encoder(struct drm_connector *connector)
 {
 	struct ptn3460_bridge *ptn_bridge;
@@ -242,7 +236,6 @@ struct drm_encoder *ptn3460_best_encoder(struct drm_connector *connector)
 
 struct drm_connector_helper_funcs ptn3460_connector_helper_funcs = {
 	.get_modes = ptn3460_get_modes,
-	.mode_valid = ptn3460_mode_valid,
 	.best_encoder = ptn3460_best_encoder,
 };
 

drivers/gpu/drm/cirrus/cirrus_mode.c

@@ -505,13 +505,6 @@ static int cirrus_vga_get_modes(struct drm_connector *connector)
 	return count;
 }
 
-static int cirrus_vga_mode_valid(struct drm_connector *connector,
-				 struct drm_display_mode *mode)
-{
-	/* Any mode we've added is valid */
-	return MODE_OK;
-}
-
 static struct drm_encoder *cirrus_connector_best_encoder(struct drm_connector
 						  *connector)
 {
@@ -546,7 +539,6 @@ static void cirrus_connector_destroy(struct drm_connector *connector)
 
 struct drm_connector_helper_funcs cirrus_vga_connector_helper_funcs = {
 	.get_modes = cirrus_vga_get_modes,
-	.mode_valid = cirrus_vga_mode_valid,
 	.best_encoder = cirrus_connector_best_encoder,
 };
 

drivers/gpu/drm/drm_bufs.c

@@ -363,7 +363,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 		list->master = dev->primary->master;
 	*maplist = list;
 	return 0;
-	}
+}
 
 int drm_addmap(struct drm_device * dev, resource_size_t offset,
 	       unsigned int size, enum drm_map_type type,

drivers/gpu/drm/drm_crtc.c

@@ -1145,16 +1145,19 @@ EXPORT_SYMBOL(drm_plane_cleanup);
  */
 void drm_plane_force_disable(struct drm_plane *plane)
 {
+	struct drm_framebuffer *old_fb = plane->fb;
 	int ret;
 
-	if (!plane->fb)
+	if (!old_fb)
 		return;
 
 	ret = plane->funcs->disable_plane(plane);
-	if (ret)
+	if (ret) {
 		DRM_ERROR("failed to disable plane with busy fb\n");
+		return;
+	}
 	/* disconnect the plane from the fb and crtc: */
-	__drm_framebuffer_unreference(plane->fb);
+	__drm_framebuffer_unreference(old_fb);
 	plane->fb = NULL;
 	plane->crtc = NULL;
 }
@@ -1378,6 +1381,12 @@ static int drm_mode_group_init(struct drm_device *dev, struct drm_mode_group *gr
 	return 0;
 }
 
+void drm_mode_group_destroy(struct drm_mode_group *group)
+{
+	kfree(group->id_list);
+	group->id_list = NULL;
+}
+
 /*
  * NOTE: Driver's shouldn't ever call drm_mode_group_init_legacy_group - it is
  * the drm core's responsibility to set up mode control groups.
@@ -2116,9 +2125,13 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
 	if (!plane_req->fb_id) {
 		drm_modeset_lock_all(dev);
 		old_fb = plane->fb;
-		plane->funcs->disable_plane(plane);
-		plane->crtc = NULL;
-		plane->fb = NULL;
+		ret = plane->funcs->disable_plane(plane);
+		if (!ret) {
+			plane->crtc = NULL;
+			plane->fb = NULL;
+		} else {
+			old_fb = NULL;
+		}
 		drm_modeset_unlock_all(dev);
 		goto out;
 	}
@@ -2187,16 +2200,18 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
 	}
 
 	drm_modeset_lock_all(dev);
+	old_fb = plane->fb;
 	ret = plane->funcs->update_plane(plane, crtc, fb,
 					 plane_req->crtc_x, plane_req->crtc_y,
 					 plane_req->crtc_w, plane_req->crtc_h,
 					 plane_req->src_x, plane_req->src_y,
 					 plane_req->src_w, plane_req->src_h);
 	if (!ret) {
-		old_fb = plane->fb;
 		plane->crtc = crtc;
 		plane->fb = fb;
 		fb = NULL;
+	} else {
+		old_fb = NULL;
 	}
 	drm_modeset_unlock_all(dev);
 
@@ -2239,9 +2254,7 @@ int drm_mode_set_config_internal(struct drm_mode_set *set)
 	ret = crtc->funcs->set_config(set);
 	if (ret == 0) {
 		crtc->primary->crtc = crtc;
-
-		/* crtc->fb must be updated by ->set_config, enforces this. */
-		WARN_ON(fb != crtc->primary->fb);
+		crtc->primary->fb = fb;
 	}
 
 	list_for_each_entry(tmp, &crtc->dev->mode_config.crtc_list, head) {

drivers/gpu/drm/drm_crtc_helper.c

@@ -140,16 +140,10 @@ drm_encoder_disable(struct drm_encoder *encoder)
 static void __drm_helper_disable_unused_functions(struct drm_device *dev)
 {
 	struct drm_encoder *encoder;
-	struct drm_connector *connector;
 	struct drm_crtc *crtc;
 
 	drm_warn_on_modeset_not_all_locked(dev);
 
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		if (!connector->encoder)
-			continue;
-	}
-
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 		if (!drm_helper_encoder_in_use(encoder)) {
 			drm_encoder_disable(encoder);
@@ -387,8 +381,7 @@ done:
 }
 EXPORT_SYMBOL(drm_crtc_helper_set_mode);
 
-
-static int
+static void
 drm_crtc_helper_disable(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -417,7 +410,6 @@ drm_crtc_helper_disable(struct drm_crtc *crtc)
 	}
 
 	__drm_helper_disable_unused_functions(dev);
-	return 0;
 }
 
 /**
@@ -468,7 +460,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 				(int)set->num_connectors, set->x, set->y);
 	} else {
 		DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
-		return drm_crtc_helper_disable(set->crtc);
+		drm_crtc_helper_disable(set->crtc);
+		return 0;
 	}
 
 	dev = set->crtc->dev;

drivers/gpu/drm/drm_dp_helper.c

@@ -206,7 +206,7 @@ i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
  * i2c_dp_aux_add_bus() - register an i2c adapter using the aux ch helper
  * @adapter: i2c adapter to register
  *
- * This registers an i2c adapater that uses dp aux channel as it's underlaying
+ * This registers an i2c adapter that uses dp aux channel as it's underlaying
  * transport. The driver needs to fill out the &i2c_algo_dp_aux_data structure
  * and store it in the algo_data member of the @adapter argument. This will be
  * used by the i2c over dp aux algorithm to drive the hardware.

drivers/gpu/drm/drm_edid.c

@@ -984,9 +984,13 @@ static const u8 edid_header[] = {
 	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
 };
 
- /*
- * Sanity check the header of the base EDID block.  Return 8 if the header
- * is perfect, down to 0 if it's totally wrong.
+/**
+ * drm_edid_header_is_valid - sanity check the header of the base EDID block
+ * @raw_edid: pointer to raw base EDID block
+ *
+ * Sanity check the header of the base EDID block.
+ *
+ * Return: 8 if the header is perfect, down to 0 if it's totally wrong.
  */
 int drm_edid_header_is_valid(const u8 *raw_edid)
 {
@@ -1005,9 +1009,16 @@ module_param_named(edid_fixup, edid_fixup, int, 0400);
 MODULE_PARM_DESC(edid_fixup,
 		 "Minimum number of valid EDID header bytes (0-8, default 6)");
 
-/*
- * Sanity check the EDID block (base or extension).  Return 0 if the block
- * doesn't check out, or 1 if it's valid.
+/**
+ * drm_edid_block_valid - Sanity check the EDID block (base or extension)
+ * @raw_edid: pointer to raw EDID block
+ * @block: type of block to validate (0 for base, extension otherwise)
+ * @print_bad_edid: if true, dump bad EDID blocks to the console
+ *
+ * Validate a base or extension EDID block and optionally dump bad blocks to
+ * the console.
+ *
+ * Return: True if the block is valid, false otherwise.
  */
 bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid)
 {
@@ -1077,6 +1088,8 @@ EXPORT_SYMBOL(drm_edid_block_valid);
  * @edid: EDID data
  *
  * Sanity-check an entire EDID record (including extensions)
+ *
+ * Return: True if the EDID data is valid, false otherwise.
  */
 bool drm_edid_is_valid(struct edid *edid)
 {
@@ -1096,18 +1109,15 @@ EXPORT_SYMBOL(drm_edid_is_valid);
 
 #define DDC_SEGMENT_ADDR 0x30
 /**
- * Get EDID information via I2C.
- *
- * @adapter : i2c device adaptor
+ * drm_do_probe_ddc_edid() - get EDID information via I2C
+ * @adapter: I2C device adaptor
  * @buf: EDID data buffer to be filled
  * @block: 128 byte EDID block to start fetching from
  * @len: EDID data buffer length to fetch
  *
- * Returns:
- *
- * 0 on success or -1 on failure.
+ * Try to fetch EDID information by calling I2C driver functions.
  *
- * Try to fetch EDID information by calling i2c driver function.
+ * Return: 0 on success or -1 on failure.
  */
 static int
 drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
@@ -1118,7 +1128,8 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
 	unsigned char xfers = segment ? 3 : 2;
 	int ret, retries = 5;
 
-	/* The core i2c driver will automatically retry the transfer if the
+	/*
+	 * The core I2C driver will automatically retry the transfer if the
 	 * adapter reports EAGAIN. However, we find that bit-banging transfers
 	 * are susceptible to errors under a heavily loaded machine and
 	 * generate spurious NAKs and timeouts. Retrying the transfer
@@ -1144,10 +1155,10 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
 			}
 		};
 
-	/*
-	 * Avoid sending the segment addr to not upset non-compliant ddc
-	 * monitors.
-	 */
+		/*
+		 * Avoid sending the segment addr to not upset non-compliant
+		 * DDC monitors.
+		 */
 		ret = i2c_transfer(adapter, &msgs[3 - xfers], xfers);
 
 		if (ret == -ENXIO) {
@@ -1246,12 +1257,10 @@ out:
 }
 
 /**
- * Probe DDC presence.
- * @adapter: i2c adapter to probe
+ * drm_probe_ddc() - probe DDC presence
+ * @adapter: I2C adapter to probe
  *
- * Returns:
- *
- * 1 on success
+ * Return: True on success, false on failure.
  */
 bool
 drm_probe_ddc(struct i2c_adapter *adapter)
@@ -1265,12 +1274,12 @@ EXPORT_SYMBOL(drm_probe_ddc);
 /**
  * drm_get_edid - get EDID data, if available
  * @connector: connector we're probing
- * @adapter: i2c adapter to use for DDC
+ * @adapter: I2C adapter to use for DDC
  *
- * Poke the given i2c channel to grab EDID data if possible.  If found,
+ * Poke the given I2C channel to grab EDID data if possible.  If found,
  * attach it to the connector.
  *
- * Return edid data or NULL if we couldn't find any.
+ * Return: Pointer to valid EDID or NULL if we couldn't find any.
  */
 struct edid *drm_get_edid(struct drm_connector *connector,
 			  struct i2c_adapter *adapter)
@@ -1288,7 +1297,7 @@ EXPORT_SYMBOL(drm_get_edid);
  * drm_edid_duplicate - duplicate an EDID and the extensions
  * @edid: EDID to duplicate
  *
- * Return duplicate edid or NULL on allocation failure.
+ * Return: Pointer to duplicated EDID or NULL on allocation failure.
  */
 struct edid *drm_edid_duplicate(const struct edid *edid)
 {
@@ -1411,7 +1420,8 @@ mode_is_rb(const struct drm_display_mode *mode)
  * @rb: Mode reduced-blanking-ness
  *
  * Walk the DMT mode list looking for a match for the given parameters.
- * Return a newly allocated copy of the mode, or NULL if not found.
+ *
+ * Return: A newly allocated copy of the mode, or NULL if not found.
  */
 struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
 					   int hsize, int vsize, int fresh,
@@ -1595,14 +1605,13 @@ bad_std_timing(u8 a, u8 b)
  * @connector: connector of for the EDID block
  * @edid: EDID block to scan
  * @t: standard timing params
- * @revision: standard timing level
  *
  * Take the standard timing params (in this case width, aspect, and refresh)
  * and convert them into a real mode using CVT/GTF/DMT.
  */
 static struct drm_display_mode *
 drm_mode_std(struct drm_connector *connector, struct edid *edid,
-	     struct std_timing *t, int revision)
+	     struct std_timing *t)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_display_mode *m, *mode = NULL;
@@ -1623,7 +1632,7 @@ drm_mode_std(struct drm_connector *connector, struct edid *edid,
 	vrefresh_rate = vfreq + 60;
 	/* the vdisplay is calculated based on the aspect ratio */
 	if (aspect_ratio == 0) {
-		if (revision < 3)
+		if (edid->revision < 3)
 			vsize = hsize;
 		else
 			vsize = (hsize * 10) / 16;
@@ -2140,7 +2149,7 @@ do_established_modes(struct detailed_timing *timing, void *c)
 
 /**
  * add_established_modes - get est. modes from EDID and add them
- * @connector: connector of for the EDID block
+ * @connector: connector to add mode(s) to
  * @edid: EDID block to scan
  *
  * Each EDID block contains a bitmap of the supported "established modes" list
@@ -2191,8 +2200,7 @@ do_standard_modes(struct detailed_timing *timing, void *c)
 			struct drm_display_mode *newmode;
 
 			std = &data->data.timings[i];
-			newmode = drm_mode_std(connector, edid, std,
-					       edid->revision);
+			newmode = drm_mode_std(connector, edid, std);
 			if (newmode) {
 				drm_mode_probed_add(connector, newmode);
 				closure->modes++;
@@ -2203,7 +2211,7 @@ do_standard_modes(struct detailed_timing *timing, void *c)
 
 /**
  * add_standard_modes - get std. modes from EDID and add them
- * @connector: connector of for the EDID block
+ * @connector: connector to add mode(s) to
  * @edid: EDID block to scan
  *
  * Standard modes can be calculated using the appropriate standard (DMT,
@@ -2221,8 +2229,7 @@ add_standard_modes(struct drm_connector *connector, struct edid *edid)
 		struct drm_display_mode *newmode;
 
 		newmode = drm_mode_std(connector, edid,
-				       &edid->standard_timings[i],
-				       edid->revision);
+				       &edid->standard_timings[i]);
 		if (newmode) {
 			drm_mode_probed_add(connector, newmode);
 			modes++;
@@ -2425,7 +2432,7 @@ cea_mode_alternate_clock(const struct drm_display_mode *cea_mode)
  * drm_match_cea_mode - look for a CEA mode matching given mode
  * @to_match: display mode
  *
- * Returns the CEA Video ID (VIC) of the mode or 0 if it isn't a CEA-861
+ * Return: The CEA Video ID (VIC) of the mode or 0 if it isn't a CEA-861
  * mode.
  */
 u8 drm_match_cea_mode(const struct drm_display_mode *to_match)
@@ -2452,6 +2459,22 @@ u8 drm_match_cea_mode(const struct drm_display_mode *to_match)
 }
 EXPORT_SYMBOL(drm_match_cea_mode);
 
+/**
+ * drm_get_cea_aspect_ratio - get the picture aspect ratio corresponding to
+ * the input VIC from the CEA mode list
+ * @video_code: ID given to each of the CEA modes
+ *
+ * Returns picture aspect ratio
+ */
+enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code)
+{
+	/* return picture aspect ratio for video_code - 1 to access the
+	 * right array element
+	*/
+	return edid_cea_modes[video_code-1].picture_aspect_ratio;
+}
+EXPORT_SYMBOL(drm_get_cea_aspect_ratio);
+
 /*
  * Calculate the alternate clock for HDMI modes (those from the HDMI vendor
  * specific block).
@@ -3023,11 +3046,9 @@ monitor_name(struct detailed_timing *t, void *data)
  * @connector: connector corresponding to the HDMI/DP sink
  * @edid: EDID to parse
  *
- * Fill the ELD (EDID-Like Data) buffer for passing to the audio driver.
- * Some ELD fields are left to the graphics driver caller:
- * - Conn_Type
- * - HDCP
- * - Port_ID
+ * Fill the ELD (EDID-Like Data) buffer for passing to the audio driver. The
+ * Conn_Type, HDCP and Port_ID ELD fields are left for the graphics driver to
+ * fill in.
  */
 void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
 {
@@ -3111,9 +3132,10 @@ EXPORT_SYMBOL(drm_edid_to_eld);
  * @sads: pointer that will be set to the extracted SADs
  *
  * Looks for CEA EDID block and extracts SADs (Short Audio Descriptors) from it.
- * Note: returned pointer needs to be kfreed
  *
- * Return number of found SADs or negative number on error.
+ * Note: The returned pointer needs to be freed using kfree().
+ *
+ * Return: The number of found SADs or negative number on error.
  */
 int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads)
 {
@@ -3170,9 +3192,11 @@ EXPORT_SYMBOL(drm_edid_to_sad);
  * @sadb: pointer to the speaker block
  *
  * Looks for CEA EDID block and extracts the Speaker Allocation Data Block from it.
- * Note: returned pointer needs to be kfreed
  *
- * Return number of found Speaker Allocation Blocks or negative number on error.
+ * Note: The returned pointer needs to be freed using kfree().
+ *
+ * Return: The number of found Speaker Allocation Blocks or negative number on
+ * error.
  */
 int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb)
 {
@@ -3219,9 +3243,12 @@ int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb)
 EXPORT_SYMBOL(drm_edid_to_speaker_allocation);
 
 /**
- * drm_av_sync_delay - HDMI/DP sink audio-video sync delay in millisecond
+ * drm_av_sync_delay - compute the HDMI/DP sink audio-video sync delay
  * @connector: connector associated with the HDMI/DP sink
  * @mode: the display mode
+ *
+ * Return: The HDMI/DP sink's audio-video sync delay in milliseconds or 0 if
+ * the sink doesn't support audio or video.
  */
 int drm_av_sync_delay(struct drm_connector *connector,
 		      struct drm_display_mode *mode)
@@ -3263,6 +3290,9 @@ EXPORT_SYMBOL(drm_av_sync_delay);
  *
  * It's possible for one encoder to be associated with multiple HDMI/DP sinks.
  * The policy is now hard coded to simply use the first HDMI/DP sink's ELD.
+ *
+ * Return: The connector associated with the first HDMI/DP sink that has ELD
+ * attached to it.
  */
 struct drm_connector *drm_select_eld(struct drm_encoder *encoder,
 				     struct drm_display_mode *mode)
@@ -3279,11 +3309,12 @@ struct drm_connector *drm_select_eld(struct drm_encoder *encoder,
 EXPORT_SYMBOL(drm_select_eld);
 
 /**
- * drm_detect_hdmi_monitor - detect whether monitor is hdmi.
+ * drm_detect_hdmi_monitor - detect whether monitor is HDMI
  * @edid: monitor EDID information
  *
  * Parse the CEA extension according to CEA-861-B.
- * Return true if HDMI, false if not or unknown.
+ *
+ * Return: True if the monitor is HDMI, false if not or unknown.
  */
 bool drm_detect_hdmi_monitor(struct edid *edid)
 {
@@ -3321,6 +3352,7 @@ EXPORT_SYMBOL(drm_detect_hdmi_monitor);
  * audio format, assume at least 'basic audio' support, even if 'basic
  * audio' is not defined in EDID.
  *
+ * Return: True if the monitor supports audio, false otherwise.
  */
 bool drm_detect_monitor_audio(struct edid *edid)
 {
@@ -3364,6 +3396,8 @@ EXPORT_SYMBOL(drm_detect_monitor_audio);
  * Check whether the monitor reports the RGB quantization range selection
  * as supported. The AVI infoframe can then be used to inform the monitor
  * which quantization range (full or limited) is used.
+ *
+ * Return: True if the RGB quantization range is selectable, false otherwise.
  */
 bool drm_rgb_quant_range_selectable(struct edid *edid)
 {
@@ -3468,11 +3502,11 @@ static void drm_add_display_info(struct edid *edid,
 /**
  * drm_add_edid_modes - add modes from EDID data, if available
  * @connector: connector we're probing
- * @edid: edid data
+ * @edid: EDID data
  *
  * Add the specified modes to the connector's mode list.
  *
- * Return number of modes added or 0 if we couldn't find any.
+ * Return: The number of modes added or 0 if we couldn't find any.
  */
 int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
 {
@@ -3534,7 +3568,7 @@ EXPORT_SYMBOL(drm_add_edid_modes);
  * Add the specified modes to the connector's mode list. Only when the
  * hdisplay/vdisplay is not beyond the given limit, it will be added.
  *
- * Return number of modes added or 0 if we couldn't find any.
+ * Return: The number of modes added or 0 if we couldn't find any.
  */
 int drm_add_modes_noedid(struct drm_connector *connector,
 			int hdisplay, int vdisplay)
@@ -3573,13 +3607,22 @@ int drm_add_modes_noedid(struct drm_connector *connector,
 }
 EXPORT_SYMBOL(drm_add_modes_noedid);
 
+/**
+ * drm_set_preferred_mode - Sets the preferred mode of a connector
+ * @connector: connector whose mode list should be processed
+ * @hpref: horizontal resolution of preferred mode
+ * @vpref: vertical resolution of preferred mode
+ *
+ * Marks a mode as preferred if it matches the resolution specified by @hpref
+ * and @vpref.
+ */
 void drm_set_preferred_mode(struct drm_connector *connector,
 			   int hpref, int vpref)
 {
 	struct drm_display_mode *mode;
 
 	list_for_each_entry(mode, &connector->probed_modes, head) {
-		if (mode->hdisplay  == hpref &&
+		if (mode->hdisplay == hpref &&
 		    mode->vdisplay == vpref)
 			mode->type |= DRM_MODE_TYPE_PREFERRED;
 	}
@@ -3592,7 +3635,7 @@ EXPORT_SYMBOL(drm_set_preferred_mode);
  * @frame: HDMI AVI infoframe
  * @mode: DRM display mode
  *
- * Returns 0 on success or a negative error code on failure.
+ * Return: 0 on success or a negative error code on failure.
  */
 int
 drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
@@ -3613,6 +3656,12 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
 	frame->video_code = drm_match_cea_mode(mode);
 
 	frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
+
+	/* Populate picture aspect ratio from CEA mode list */
+	if (frame->video_code > 0)
+		frame->picture_aspect = drm_get_cea_aspect_ratio(
+						frame->video_code);
+
 	frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
 	frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
 
@@ -3657,7 +3706,7 @@ s3d_structure_from_display_mode(const struct drm_display_mode *mode)
  * 4k or stereoscopic 3D mode. So when giving any other mode as input this
  * function will return -EINVAL, error that can be safely ignored.
  *
- * Returns 0 on success or a negative error code on failure.
+ * Return: 0 on success or a negative error code on failure.
  */
 int
 drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,

drivers/gpu/drm/drm_fb_helper.c

@@ -45,13 +45,13 @@ static LIST_HEAD(kernel_fb_helper_list);
  * DOC: fbdev helpers
  *
  * The fb helper functions are useful to provide an fbdev on top of a drm kernel
- * mode setting driver. They can be used mostly independantely from the crtc
+ * mode setting driver. They can be used mostly independently from the crtc
  * helper functions used by many drivers to implement the kernel mode setting
  * interfaces.
  *
  * Initialization is done as a three-step process with drm_fb_helper_init(),
  * drm_fb_helper_single_add_all_connectors() and drm_fb_helper_initial_config().
- * Drivers with fancier requirements than the default beheviour can override the
+ * Drivers with fancier requirements than the default behaviour can override the
  * second step with their own code.  Teardown is done with drm_fb_helper_fini().
  *
  * At runtime drivers should restore the fbdev console by calling
@@ -59,7 +59,7 @@ static LIST_HEAD(kernel_fb_helper_list);
  * should also notify the fb helper code from updates to the output
  * configuration by calling drm_fb_helper_hotplug_event(). For easier
  * integration with the output polling code in drm_crtc_helper.c the modeset
- * code proves a ->output_poll_changed callback.
+ * code provides a ->output_poll_changed callback.
  *
  * All other functions exported by the fb helper library can be used to
  * implement the fbdev driver interface by the driver.
@@ -326,12 +326,21 @@ static bool drm_fb_helper_force_kernel_mode(void)
 		return false;
 
 	list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
-		if (helper->dev->switch_power_state == DRM_SWITCH_POWER_OFF)
+		struct drm_device *dev = helper->dev;
+
+		if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
+			continue;
+
+		if (!mutex_trylock(&dev->mode_config.mutex)) {
+			error = true;
 			continue;
+		}
 
 		ret = drm_fb_helper_restore_fbdev_mode(helper);
 		if (ret)
 			error = true;
+
+		mutex_unlock(&dev->mode_config.mutex);
 	}
 	return error;
 }

drivers/gpu/drm/drm_fops.c

@@ -43,8 +43,7 @@
 DEFINE_MUTEX(drm_global_mutex);
 EXPORT_SYMBOL(drm_global_mutex);
 
-static int drm_open_helper(struct inode *inode, struct file *filp,
-			   struct drm_minor *minor);
+static int drm_open_helper(struct file *filp, struct drm_minor *minor);
 
 static int drm_setup(struct drm_device * dev)
 {
@@ -95,7 +94,7 @@ int drm_open(struct inode *inode, struct file *filp)
 	/* share address_space across all char-devs of a single device */
 	filp->f_mapping = dev->anon_inode->i_mapping;
 
-	retcode = drm_open_helper(inode, filp, minor);
+	retcode = drm_open_helper(filp, minor);
 	if (retcode)
 		goto err_undo;
 	if (need_setup) {
@@ -171,7 +170,6 @@ static int drm_cpu_valid(void)
 /**
  * Called whenever a process opens /dev/drm.
  *
- * \param inode device inode.
  * \param filp file pointer.
  * \param minor acquired minor-object.
  * \return zero on success or a negative number on failure.
@@ -179,8 +177,7 @@ static int drm_cpu_valid(void)
  * Creates and initializes a drm_file structure for the file private data in \p
  * filp and add it into the double linked list in \p dev.
  */
-static int drm_open_helper(struct inode *inode, struct file *filp,
-			   struct drm_minor *minor)
+static int drm_open_helper(struct file *filp, struct drm_minor *minor)
 {
 	struct drm_device *dev = minor->dev;
 	struct drm_file *priv;

drivers/gpu/drm/drm_irq.c

@@ -1,6 +1,5 @@
-/**
- * \file drm_irq.c
- * IRQ support
+/*
+ * drm_irq.c IRQ and vblank support
  *
  * \author Rickard E. (Rik) Faith <faith@valinux.com>
  * \author Gareth Hughes <gareth@valinux.com>
@@ -140,33 +139,40 @@ static void vblank_disable_and_save(struct drm_device *dev, int crtc)
 
 static void vblank_disable_fn(unsigned long arg)
 {
-	struct drm_device *dev = (struct drm_device *)arg;
+	struct drm_vblank_crtc *vblank = (void *)arg;
+	struct drm_device *dev = vblank->dev;
 	unsigned long irqflags;
-	int i;
+	int crtc = vblank->crtc;
 
 	if (!dev->vblank_disable_allowed)
 		return;
 
-	for (i = 0; i < dev->num_crtcs; i++) {
-		spin_lock_irqsave(&dev->vbl_lock, irqflags);
-		if (atomic_read(&dev->vblank[i].refcount) == 0 &&
-		    dev->vblank[i].enabled) {
-			DRM_DEBUG("disabling vblank on crtc %d\n", i);
-			vblank_disable_and_save(dev, i);
-		}
-		spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+	spin_lock_irqsave(&dev->vbl_lock, irqflags);
+	if (atomic_read(&vblank->refcount) == 0 && vblank->enabled) {
+		DRM_DEBUG("disabling vblank on crtc %d\n", crtc);
+		vblank_disable_and_save(dev, crtc);
 	}
+	spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
 }
 
+/**
+ * drm_vblank_cleanup - cleanup vblank support
+ * @dev: DRM device
+ *
+ * This function cleans up any resources allocated in drm_vblank_init.
+ */
 void drm_vblank_cleanup(struct drm_device *dev)
 {
+	int crtc;
+
 	/* Bail if the driver didn't call drm_vblank_init() */
 	if (dev->num_crtcs == 0)
 		return;
 
-	del_timer_sync(&dev->vblank_disable_timer);
-
-	vblank_disable_fn((unsigned long)dev);
+	for (crtc = 0; crtc < dev->num_crtcs; crtc++) {
+		del_timer_sync(&dev->vblank[crtc].disable_timer);
+		vblank_disable_fn((unsigned long)&dev->vblank[crtc]);
+	}
 
 	kfree(dev->vblank);
 
@@ -174,12 +180,20 @@ void drm_vblank_cleanup(struct drm_device *dev)
 }
 EXPORT_SYMBOL(drm_vblank_cleanup);
 
+/**
+ * drm_vblank_init - initialize vblank support
+ * @dev: drm_device
+ * @num_crtcs: number of crtcs supported by @dev
+ *
+ * This function initializes vblank support for @num_crtcs display pipelines.
+ *
+ * Returns:
+ * Zero on success or a negative error code on failure.
+ */
 int drm_vblank_init(struct drm_device *dev, int num_crtcs)
 {
 	int i, ret = -ENOMEM;
 
-	setup_timer(&dev->vblank_disable_timer, vblank_disable_fn,
-		    (unsigned long)dev);
 	spin_lock_init(&dev->vbl_lock);
 	spin_lock_init(&dev->vblank_time_lock);
 
@@ -189,8 +203,13 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs)
 	if (!dev->vblank)
 		goto err;
 
-	for (i = 0; i < num_crtcs; i++)
+	for (i = 0; i < num_crtcs; i++) {
+		dev->vblank[i].dev = dev;
+		dev->vblank[i].crtc = i;
 		init_waitqueue_head(&dev->vblank[i].queue);
+		setup_timer(&dev->vblank[i].disable_timer, vblank_disable_fn,
+			    (unsigned long)&dev->vblank[i]);
+	}
 
 	DRM_INFO("Supports vblank timestamp caching Rev 2 (21.10.2013).\n");
 
@@ -234,13 +253,21 @@ static void drm_irq_vgaarb_nokms(void *cookie, bool state)
 }
 
 /**
- * Install IRQ handler.
- *
- * \param dev DRM device.
+ * drm_irq_install - install IRQ handler
+ * @dev: DRM device
+ * @irq: IRQ number to install the handler for
  *
  * Initializes the IRQ related data. Installs the handler, calling the driver
- * \c irq_preinstall() and \c irq_postinstall() functions
- * before and after the installation.
+ * irq_preinstall() and irq_postinstall() functions before and after the
+ * installation.
+ *
+ * This is the simplified helper interface provided for drivers with no special
+ * needs. Drivers which need to install interrupt handlers for multiple
+ * interrupts must instead set drm_device->irq_enabled to signal the DRM core
+ * that vblank interrupts are available.
+ *
+ * Returns:
+ * Zero on success or a negative error code on failure.
  */
 int drm_irq_install(struct drm_device *dev, int irq)
 {
@@ -300,11 +327,20 @@ int drm_irq_install(struct drm_device *dev, int irq)
 EXPORT_SYMBOL(drm_irq_install);
 
 /**
- * Uninstall the IRQ handler.
+ * drm_irq_uninstall - uninstall the IRQ handler
+ * @dev: DRM device
  *
- * \param dev DRM device.
+ * Calls the driver's irq_uninstall() function and unregisters the IRQ handler.
+ * This should only be called by drivers which used drm_irq_install() to set up
+ * their interrupt handler. Other drivers must only reset
+ * drm_device->irq_enabled to false.
  *
- * Calls the driver's \c irq_uninstall() function, and stops the irq.
+ * Note that for kernel modesetting drivers it is a bug if this function fails.
+ * The sanity checks are only to catch buggy user modesetting drivers which call
+ * the same function through an ioctl.
+ *
+ * Returns:
+ * Zero on success or a negative error code on failure.
  */
 int drm_irq_uninstall(struct drm_device *dev)
 {
@@ -349,7 +385,7 @@ int drm_irq_uninstall(struct drm_device *dev)
 }
 EXPORT_SYMBOL(drm_irq_uninstall);
 
-/**
+/*
  * IRQ control ioctl.
  *
  * \param inode device inode.
@@ -402,15 +438,14 @@ int drm_control(struct drm_device *dev, void *data,
 }
 
 /**
- * drm_calc_timestamping_constants - Calculate vblank timestamp constants
- *
- * @crtc drm_crtc whose timestamp constants should be updated.
- * @mode display mode containing the scanout timings
+ * drm_calc_timestamping_constants - calculate vblank timestamp constants
+ * @crtc: drm_crtc whose timestamp constants should be updated.
+ * @mode: display mode containing the scanout timings
  *
  * Calculate and store various constants which are later
  * needed by vblank and swap-completion timestamping, e.g,
  * by drm_calc_vbltimestamp_from_scanoutpos(). They are
- * derived from crtc's true scanout timing, so they take
+ * derived from CRTC's true scanout timing, so they take
  * things like panel scaling or other adjustments into account.
  */
 void drm_calc_timestamping_constants(struct drm_crtc *crtc,
@@ -455,11 +490,22 @@ void drm_calc_timestamping_constants(struct drm_crtc *crtc,
 EXPORT_SYMBOL(drm_calc_timestamping_constants);
 
 /**
- * drm_calc_vbltimestamp_from_scanoutpos - helper routine for kms
- * drivers. Implements calculation of exact vblank timestamps from
- * given drm_display_mode timings and current video scanout position
- * of a crtc. This can be called from within get_vblank_timestamp()
- * implementation of a kms driver to implement the actual timestamping.
+ * drm_calc_vbltimestamp_from_scanoutpos - precise vblank timestamp helper
+ * @dev: DRM device
+ * @crtc: Which CRTC's vblank timestamp to retrieve
+ * @max_error: Desired maximum allowable error in timestamps (nanosecs)
+ *             On return contains true maximum error of timestamp
+ * @vblank_time: Pointer to struct timeval which should receive the timestamp
+ * @flags: Flags to pass to driver:
+ *         0 = Default,
+ *         DRM_CALLED_FROM_VBLIRQ = If function is called from vbl IRQ handler
+ * @refcrtc: CRTC which defines scanout timing
+ * @mode: mode which defines the scanout timings
+ *
+ * Implements calculation of exact vblank timestamps from given drm_display_mode
+ * timings and current video scanout position of a CRTC. This can be called from
+ * within get_vblank_timestamp() implementation of a kms driver to implement the
+ * actual timestamping.
  *
  * Should return timestamps conforming to the OML_sync_control OpenML
  * extension specification. The timestamp corresponds to the end of
@@ -474,21 +520,11 @@ EXPORT_SYMBOL(drm_calc_timestamping_constants);
  * returns as no operation if a doublescan or interlaced video mode is
  * active. Higher level code is expected to handle this.
  *
- * @dev: DRM device.
- * @crtc: Which crtc's vblank timestamp to retrieve.
- * @max_error: Desired maximum allowable error in timestamps (nanosecs).
- *             On return contains true maximum error of timestamp.
- * @vblank_time: Pointer to struct timeval which should receive the timestamp.
- * @flags: Flags to pass to driver:
- *         0 = Default.
- *         DRM_CALLED_FROM_VBLIRQ = If function is called from vbl irq handler.
- * @refcrtc: drm_crtc* of crtc which defines scanout timing.
- * @mode: mode which defines the scanout timings
- *
- * Returns negative value on error, failure or if not supported in current
+ * Returns:
+ * Negative value on error, failure or if not supported in current
  * video mode:
  *
- * -EINVAL   - Invalid crtc.
+ * -EINVAL   - Invalid CRTC.
  * -EAGAIN   - Temporary unavailable, e.g., called before initial modeset.
  * -ENOTSUPP - Function not supported in current display mode.
  * -EIO      - Failed, e.g., due to failed scanout position query.
@@ -637,23 +673,23 @@ static struct timeval get_drm_timestamp(void)
 
 /**
  * drm_get_last_vbltimestamp - retrieve raw timestamp for the most recent
- * vblank interval.
- *
+ * 			       vblank interval
  * @dev: DRM device
- * @crtc: which crtc's vblank timestamp to retrieve
+ * @crtc: which CRTC's vblank timestamp to retrieve
  * @tvblank: Pointer to target struct timeval which should receive the timestamp
  * @flags: Flags to pass to driver:
- *         0 = Default.
- *         DRM_CALLED_FROM_VBLIRQ = If function is called from vbl irq handler.
+ *         0 = Default,
+ *         DRM_CALLED_FROM_VBLIRQ = If function is called from vbl IRQ handler
  *
  * Fetches the system timestamp corresponding to the time of the most recent
- * vblank interval on specified crtc. May call into kms-driver to
+ * vblank interval on specified CRTC. May call into kms-driver to
  * compute the timestamp with a high-precision GPU specific method.
  *
  * Returns zero if timestamp originates from uncorrected do_gettimeofday()
  * call, i.e., it isn't very precisely locked to the true vblank.
  *
- * Returns non-zero if timestamp is considered to be very precise.
+ * Returns:
+ * Non-zero if timestamp is considered to be very precise, zero otherwise.
  */
 u32 drm_get_last_vbltimestamp(struct drm_device *dev, int crtc,
 			      struct timeval *tvblank, unsigned flags)
@@ -688,6 +724,9 @@ EXPORT_SYMBOL(drm_get_last_vbltimestamp);
  * Fetches the "cooked" vblank count value that represents the number of
  * vblank events since the system was booted, including lost events due to
  * modesetting activity.
+ *
+ * Returns:
+ * The software vblank counter.
  */
 u32 drm_vblank_count(struct drm_device *dev, int crtc)
 {
@@ -706,8 +745,7 @@ EXPORT_SYMBOL(drm_vblank_count);
  * Fetches the "cooked" vblank count value that represents the number of
  * vblank events since the system was booted, including lost events due to
  * modesetting activity. Returns corresponding system timestamp of the time
- * of the vblank interval that corresponds to the current value vblank counter
- * value.
+ * of the vblank interval that corresponds to the current vblank counter value.
  */
 u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc,
 			      struct timeval *vblanktime)
@@ -835,6 +873,41 @@ static void drm_update_vblank_count(struct drm_device *dev, int crtc)
 	smp_mb__after_atomic_inc();
 }
 
+/**
+ * drm_vblank_enable - enable the vblank interrupt on a CRTC
+ * @dev: DRM device
+ * @crtc: CRTC in question
+ */
+static int drm_vblank_enable(struct drm_device *dev, int crtc)
+{
+	int ret = 0;
+
+	assert_spin_locked(&dev->vbl_lock);
+
+	spin_lock(&dev->vblank_time_lock);
+
+	if (!dev->vblank[crtc].enabled) {
+		/* Enable vblank irqs under vblank_time_lock protection.
+		 * All vblank count & timestamp updates are held off
+		 * until we are done reinitializing master counter and
+		 * timestamps. Filtercode in drm_handle_vblank() will
+		 * prevent double-accounting of same vblank interval.
+		 */
+		ret = dev->driver->enable_vblank(dev, crtc);
+		DRM_DEBUG("enabling vblank on crtc %d, ret: %d\n", crtc, ret);
+		if (ret)
+			atomic_dec(&dev->vblank[crtc].refcount);
+		else {
+			dev->vblank[crtc].enabled = true;
+			drm_update_vblank_count(dev, crtc);
+		}
+	}
+
+	spin_unlock(&dev->vblank_time_lock);
+
+	return ret;
+}
+
 /**
  * drm_vblank_get - get a reference count on vblank events
  * @dev: DRM device
@@ -843,36 +916,20 @@ static void drm_update_vblank_count(struct drm_device *dev, int crtc)
  * Acquire a reference count on vblank events to avoid having them disabled
  * while in use.
  *
- * RETURNS
+ * This is the legacy version of drm_crtc_vblank_get().
+ *
+ * Returns:
  * Zero on success, nonzero on failure.
  */
 int drm_vblank_get(struct drm_device *dev, int crtc)
 {
-	unsigned long irqflags, irqflags2;
+	unsigned long irqflags;
 	int ret = 0;
 
 	spin_lock_irqsave(&dev->vbl_lock, irqflags);
 	/* Going from 0->1 means we have to enable interrupts again */
 	if (atomic_add_return(1, &dev->vblank[crtc].refcount) == 1) {
-		spin_lock_irqsave(&dev->vblank_time_lock, irqflags2);
-		if (!dev->vblank[crtc].enabled) {
-			/* Enable vblank irqs under vblank_time_lock protection.
-			 * All vblank count & timestamp updates are held off
-			 * until we are done reinitializing master counter and
-			 * timestamps. Filtercode in drm_handle_vblank() will
-			 * prevent double-accounting of same vblank interval.
-			 */
-			ret = dev->driver->enable_vblank(dev, crtc);
-			DRM_DEBUG("enabling vblank on crtc %d, ret: %d\n",
-				  crtc, ret);
-			if (ret)
-				atomic_dec(&dev->vblank[crtc].refcount);
-			else {
-				dev->vblank[crtc].enabled = true;
-				drm_update_vblank_count(dev, crtc);
-			}
-		}
-		spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags2);
+		ret = drm_vblank_enable(dev, crtc);
 	} else {
 		if (!dev->vblank[crtc].enabled) {
 			atomic_dec(&dev->vblank[crtc].refcount);
@@ -885,6 +942,24 @@ int drm_vblank_get(struct drm_device *dev, int crtc)
 }
 EXPORT_SYMBOL(drm_vblank_get);
 
+/**
+ * drm_crtc_vblank_get - get a reference count on vblank events
+ * @crtc: which CRTC to own
+ *
+ * Acquire a reference count on vblank events to avoid having them disabled
+ * while in use.
+ *
+ * This is the native kms version of drm_vblank_off().
+ *
+ * Returns:
+ * Zero on success, nonzero on failure.
+ */
+int drm_crtc_vblank_get(struct drm_crtc *crtc)
+{
+	return drm_vblank_get(crtc->dev, drm_crtc_index(crtc));
+}
+EXPORT_SYMBOL(drm_crtc_vblank_get);
+
 /**
  * drm_vblank_put - give up ownership of vblank events
  * @dev: DRM device
@@ -892,6 +967,8 @@ EXPORT_SYMBOL(drm_vblank_get);
  *
  * Release ownership of a given vblank counter, turning off interrupts
  * if possible. Disable interrupts after drm_vblank_offdelay milliseconds.
+ *
+ * This is the legacy version of drm_crtc_vblank_put().
  */
 void drm_vblank_put(struct drm_device *dev, int crtc)
 {
@@ -900,17 +977,39 @@ void drm_vblank_put(struct drm_device *dev, int crtc)
 	/* Last user schedules interrupt disable */
 	if (atomic_dec_and_test(&dev->vblank[crtc].refcount) &&
 	    (drm_vblank_offdelay > 0))
-		mod_timer(&dev->vblank_disable_timer,
+		mod_timer(&dev->vblank[crtc].disable_timer,
 			  jiffies + ((drm_vblank_offdelay * HZ)/1000));
 }
 EXPORT_SYMBOL(drm_vblank_put);
 
+/**
+ * drm_crtc_vblank_put - give up ownership of vblank events
+ * @crtc: which counter to give up
+ *
+ * Release ownership of a given vblank counter, turning off interrupts
+ * if possible. Disable interrupts after drm_vblank_offdelay milliseconds.
+ *
+ * This is the native kms version of drm_vblank_put().
+ */
+void drm_crtc_vblank_put(struct drm_crtc *crtc)
+{
+	drm_vblank_put(crtc->dev, drm_crtc_index(crtc));
+}
+EXPORT_SYMBOL(drm_crtc_vblank_put);
+
 /**
  * drm_vblank_off - disable vblank events on a CRTC
  * @dev: DRM device
  * @crtc: CRTC in question
  *
- * Caller must hold event lock.
+ * Drivers can use this function to shut down the vblank interrupt handling when
+ * disabling a crtc. This function ensures that the latest vblank frame count is
+ * stored so that drm_vblank_on() can restore it again.
+ *
+ * Drivers must use this function when the hardware vblank counter can get
+ * reset, e.g. when suspending.
+ *
+ * This is the legacy version of drm_crtc_vblank_off().
  */
 void drm_vblank_off(struct drm_device *dev, int crtc)
 {
@@ -943,6 +1042,66 @@ void drm_vblank_off(struct drm_device *dev, int crtc)
 }
 EXPORT_SYMBOL(drm_vblank_off);
 
+/**
+ * drm_crtc_vblank_off - disable vblank events on a CRTC
+ * @crtc: CRTC in question
+ *
+ * Drivers can use this function to shut down the vblank interrupt handling when
+ * disabling a crtc. This function ensures that the latest vblank frame count is
+ * stored so that drm_vblank_on can restore it again.
+ *
+ * Drivers must use this function when the hardware vblank counter can get
+ * reset, e.g. when suspending.
+ *
+ * This is the native kms version of drm_vblank_off().
+ */
+void drm_crtc_vblank_off(struct drm_crtc *crtc)
+{
+	drm_vblank_off(crtc->dev, drm_crtc_index(crtc));
+}
+EXPORT_SYMBOL(drm_crtc_vblank_off);
+
+/**
+ * drm_vblank_on - enable vblank events on a CRTC
+ * @dev: DRM device
+ * @crtc: CRTC in question
+ *
+ * This functions restores the vblank interrupt state captured with
+ * drm_vblank_off() again. Note that calls to drm_vblank_on() and
+ * drm_vblank_off() can be unbalanced and so can also be unconditionaly called
+ * in driver load code to reflect the current hardware state of the crtc.
+ *
+ * This is the legacy version of drm_crtc_vblank_on().
+ */
+void drm_vblank_on(struct drm_device *dev, int crtc)
+{
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev->vbl_lock, irqflags);
+	/* re-enable interrupts if there's are users left */
+	if (atomic_read(&dev->vblank[crtc].refcount) != 0)
+		WARN_ON(drm_vblank_enable(dev, crtc));
+	spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+}
+EXPORT_SYMBOL(drm_vblank_on);
+
+/**
+ * drm_crtc_vblank_on - enable vblank events on a CRTC
+ * @crtc: CRTC in question
+ *
+ * This functions restores the vblank interrupt state captured with
+ * drm_vblank_off() again. Note that calls to drm_vblank_on() and
+ * drm_vblank_off() can be unbalanced and so can also be unconditionaly called
+ * in driver load code to reflect the current hardware state of the crtc.
+ *
+ * This is the native kms version of drm_vblank_on().
+ */
+void drm_crtc_vblank_on(struct drm_crtc *crtc)
+{
+	drm_vblank_on(crtc->dev, drm_crtc_index(crtc));
+}
+EXPORT_SYMBOL(drm_crtc_vblank_on);
+
 /**
  * drm_vblank_pre_modeset - account for vblanks across mode sets
  * @dev: DRM device
@@ -950,6 +1109,21 @@ EXPORT_SYMBOL(drm_vblank_off);
  *
  * Account for vblank events across mode setting events, which will likely
  * reset the hardware frame counter.
+ *
+ * This is done by grabbing a temporary vblank reference to ensure that the
+ * vblank interrupt keeps running across the modeset sequence. With this the
+ * software-side vblank frame counting will ensure that there are no jumps or
+ * discontinuities.
+ *
+ * Unfortunately this approach is racy and also doesn't work when the vblank
+ * interrupt stops running, e.g. across system suspend resume. It is therefore
+ * highly recommended that drivers use the newer drm_vblank_off() and
+ * drm_vblank_on() instead. drm_vblank_pre_modeset() only works correctly when
+ * using "cooked" software vblank frame counters and not relying on any hardware
+ * counters.
+ *
+ * Drivers must call drm_vblank_post_modeset() when re-enabling the same crtc
+ * again.
  */
 void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
 {
@@ -971,6 +1145,14 @@ void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
 }
 EXPORT_SYMBOL(drm_vblank_pre_modeset);
 
+/**
+ * drm_vblank_post_modeset - undo drm_vblank_pre_modeset changes
+ * @dev: DRM device
+ * @crtc: CRTC in question
+ *
+ * This function again drops the temporary vblank reference acquired in
+ * drm_vblank_pre_modeset.
+ */
 void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
 {
 	unsigned long irqflags;
@@ -992,7 +1174,7 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
 }
 EXPORT_SYMBOL(drm_vblank_post_modeset);
 
-/**
+/*
  * drm_modeset_ctl - handle vblank event counter changes across mode switch
  * @DRM_IOCTL_ARGS: standard ioctl arguments
  *
@@ -1105,7 +1287,7 @@ err_put:
 	return ret;
 }
 
-/**
+/*
  * Wait for VBLANK.
  *
  * \param inode device inode.
@@ -1116,7 +1298,7 @@ err_put:
  *
  * This function enables the vblank interrupt on the pipe requested, then
  * sleeps waiting for the requested sequence number to occur, and drops
- * the vblank interrupt refcount afterwards. (vblank irq disable follows that
+ * the vblank interrupt refcount afterwards. (vblank IRQ disable follows that
  * after a timeout with no further vblank waits scheduled).
  */
 int drm_wait_vblank(struct drm_device *dev, void *data,
@@ -1187,6 +1369,7 @@ int drm_wait_vblank(struct drm_device *dev, void *data,
 	DRM_WAIT_ON(ret, dev->vblank[crtc].queue, 3 * HZ,
 		    (((drm_vblank_count(dev, crtc) -
 		       vblwait->request.sequence) <= (1 << 23)) ||
+		     !dev->vblank[crtc].enabled ||
 		     !dev->irq_enabled));
 
 	if (ret != -EINTR) {

drivers/gpu/drm/drm_plane_helper.c

@@ -124,7 +124,6 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
 		.y2 = crtc->mode.vdisplay,
 	};
 	struct drm_connector **connector_list;
-	struct drm_framebuffer *tmpfb;
 	int num_connectors, ret;
 
 	if (!crtc->enabled) {
@@ -145,6 +144,8 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
 	}
 
 	/* Disallow scaling */
+	src_w >>= 16;
+	src_h >>= 16;
 	if (crtc_w != src_w || crtc_h != src_h) {
 		DRM_DEBUG_KMS("Can't scale primary plane\n");
 		return -EINVAL;
@@ -176,21 +177,14 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
 	set.num_connectors = num_connectors;
 
 	/*
-	 * set_config() adjusts crtc->primary->fb; however the DRM setplane
-	 * code that called us expects to handle the framebuffer update and
-	 * reference counting; save and restore the current fb before
-	 * calling it.
-	 *
-	 * N.B., we call set_config() directly here rather than using
+	 * We call set_config() directly here rather than using
 	 * drm_mode_set_config_internal.  We're reprogramming the same
 	 * connectors that were already in use, so we shouldn't need the extra
 	 * cross-CRTC fb refcounting to accomodate stealing connectors.
 	 * drm_mode_setplane() already handles the basic refcounting for the
 	 * framebuffers involved in this operation.
 	 */
-	tmpfb = plane->fb;
 	ret = crtc->funcs->set_config(&set);
-	plane->fb = tmpfb;
 
 	kfree(connector_list);
 	return ret;
@@ -232,7 +226,6 @@ EXPORT_SYMBOL(drm_primary_helper_disable);
  */
 void drm_primary_helper_destroy(struct drm_plane *plane)
 {
-	plane->funcs->disable_plane(plane);
 	drm_plane_cleanup(plane);
 	kfree(plane);
 }

drivers/gpu/drm/drm_probe_helper.c

@@ -151,7 +151,7 @@ static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connect
 	drm_mode_validate_flag(connector, mode_flags);
 
 	list_for_each_entry(mode, &connector->modes, head) {
-		if (mode->status == MODE_OK)
+		if (mode->status == MODE_OK && connector_funcs->mode_valid)
 			mode->status = connector_funcs->mode_valid(connector,
 								   mode);
 	}

drivers/gpu/drm/drm_stub.c

@@ -294,6 +294,7 @@ static void drm_minor_free(struct drm_device *dev, unsigned int type)
 
 	slot = drm_minor_get_slot(dev, type);
 	if (*slot) {
+		drm_mode_group_destroy(&(*slot)->mode_group);
 		kfree(*slot);
 		*slot = NULL;
 	}

drivers/gpu/drm/exynos/exynos_dp_core.c

@@ -949,12 +949,6 @@ static int exynos_dp_get_modes(struct drm_connector *connector)
 	return 1;
 }
 
-static int exynos_dp_mode_valid(struct drm_connector *connector,
-			struct drm_display_mode *mode)
-{
-	return MODE_OK;
-}
-
 static struct drm_encoder *exynos_dp_best_encoder(
 			struct drm_connector *connector)
 {
@@ -965,7 +959,6 @@ static struct drm_encoder *exynos_dp_best_encoder(
 
 static struct drm_connector_helper_funcs exynos_dp_connector_helper_funcs = {
 	.get_modes = exynos_dp_get_modes,
-	.mode_valid = exynos_dp_mode_valid,
 	.best_encoder = exynos_dp_best_encoder,
 };
 

drivers/gpu/drm/exynos/exynos_drm_dpi.c

@@ -94,12 +94,6 @@ static int exynos_dpi_get_modes(struct drm_connector *connector)
 	return 0;
 }
 
-static int exynos_dpi_mode_valid(struct drm_connector *connector,
-				 struct drm_display_mode *mode)
-{
-	return MODE_OK;
-}
-
 static struct drm_encoder *
 exynos_dpi_best_encoder(struct drm_connector *connector)
 {
@@ -110,7 +104,6 @@ exynos_dpi_best_encoder(struct drm_connector *connector)
 
 static struct drm_connector_helper_funcs exynos_dpi_connector_helper_funcs = {
 	.get_modes = exynos_dpi_get_modes,
-	.mode_valid = exynos_dpi_mode_valid,
 	.best_encoder = exynos_dpi_best_encoder,
 };
 

drivers/gpu/drm/exynos/exynos_drm_vidi.c

@@ -533,12 +533,6 @@ static int vidi_get_modes(struct drm_connector *connector)
 	return drm_add_edid_modes(connector, edid);
 }
 
-static int vidi_mode_valid(struct drm_connector *connector,
-			struct drm_display_mode *mode)
-{
-	return MODE_OK;
-}
-
 static struct drm_encoder *vidi_best_encoder(struct drm_connector *connector)
 {
 	struct vidi_context *ctx = ctx_from_connector(connector);
@@ -548,7 +542,6 @@ static struct drm_encoder *vidi_best_encoder(struct drm_connector *connector)
 
 static struct drm_connector_helper_funcs vidi_connector_helper_funcs = {
 	.get_modes = vidi_get_modes,
-	.mode_valid = vidi_mode_valid,
 	.best_encoder = vidi_best_encoder,
 };
 

drivers/gpu/drm/i915/i915_irq.c

@@ -455,8 +455,8 @@ static void cpt_set_fifo_underrun_reporting(struct drm_device *dev,
  *
  * Returns the previous state of underrun reporting.
  */
-bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
-					     enum pipe pipe, bool enable)
+static bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
+						    enum pipe pipe, bool enable)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];

drivers/gpu/drm/i915/intel_display.c

@@ -3910,7 +3910,7 @@ static void intel_crtc_disable_planes(struct drm_crtc *crtc)
 	int plane = intel_crtc->plane;
 
 	intel_crtc_wait_for_pending_flips(crtc);
-	drm_vblank_off(dev, pipe);
+	drm_crtc_vblank_off(crtc);
 
 	if (dev_priv->fbc.plane == plane)
 		intel_disable_fbc(dev);
@@ -4000,6 +4000,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 
 	intel_crtc_enable_planes(crtc);
 
+	drm_crtc_vblank_on(crtc);
 }
 
 /* IPS only exists on ULT machines and is tied to pipe A. */
@@ -4113,6 +4114,8 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	 * to change the workaround. */
 	haswell_mode_set_planes_workaround(intel_crtc);
 	intel_crtc_enable_planes(crtc);
+
+	drm_crtc_vblank_on(crtc);
 }
 
 static void ironlake_pfit_disable(struct intel_crtc *crtc)
@@ -4620,6 +4623,8 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
 		encoder->enable(encoder);
 
 	intel_crtc_enable_planes(crtc);
+
+	drm_crtc_vblank_on(crtc);
 }
 
 static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
@@ -4697,6 +4702,8 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
 		encoder->enable(encoder);
 
 	intel_crtc_enable_planes(crtc);
+
+	drm_crtc_vblank_on(crtc);
 }
 
 static void i9xx_pfit_disable(struct intel_crtc *crtc)
@@ -8815,7 +8822,7 @@ static void do_intel_finish_page_flip(struct drm_device *dev,
 	if (work->event)
 		drm_send_vblank_event(dev, intel_crtc->pipe, work->event);
 
-	drm_vblank_put(dev, intel_crtc->pipe);
+	drm_crtc_vblank_put(crtc);
 
 	spin_unlock_irqrestore(&dev->event_lock, flags);
 
@@ -9197,7 +9204,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	work->old_fb_obj = to_intel_framebuffer(old_fb)->obj;
 	INIT_WORK(&work->work, intel_unpin_work_fn);
 
-	ret = drm_vblank_get(dev, intel_crtc->pipe);
+	ret = drm_crtc_vblank_get(crtc);
 	if (ret)
 		goto free_work;
 
@@ -9206,7 +9213,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	if (intel_crtc->unpin_work) {
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 		kfree(work);
-		drm_vblank_put(dev, intel_crtc->pipe);
+		drm_crtc_vblank_put(crtc);
 
 		DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
 		return -EBUSY;
@@ -9280,7 +9287,7 @@ cleanup:
 	intel_crtc->unpin_work = NULL;
 	spin_unlock_irqrestore(&dev->event_lock, flags);
 
-	drm_vblank_put(dev, intel_crtc->pipe);
+	drm_crtc_vblank_put(crtc);
 free_work:
 	kfree(work);
 
@@ -10901,6 +10908,8 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
 
 	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
+
+	WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
 }
 
 enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
@@ -11838,11 +11847,18 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 			encoder->base.crtc = NULL;
 		}
 	}
-	if (crtc->active) {
+
+	if (crtc->active || IS_VALLEYVIEW(dev) || INTEL_INFO(dev)->gen < 5) {
 		/*
 		 * We start out with underrun reporting disabled to avoid races.
 		 * For correct bookkeeping mark this on active crtcs.
 		 *
+		 * Also on gmch platforms we dont have any hardware bits to
+		 * disable the underrun reporting. Which means we need to start
+		 * out with underrun reporting disabled also on inactive pipes,
+		 * since otherwise we'll complain about the garbage we read when
+		 * e.g. coming up after runtime pm.
+		 *
 		 * No protection against concurrent access is required - at
 		 * worst a fifo underrun happens which also sets this to false.
 		 */

drivers/gpu/drm/i915/intel_drv.h

@@ -668,8 +668,6 @@ hdmi_to_dig_port(struct intel_hdmi *intel_hdmi)
 /* i915_irq.c */
 bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
 					   enum pipe pipe, bool enable);
-bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
-					     enum pipe pipe, bool enable);
 bool intel_set_pch_fifo_underrun_reporting(struct drm_device *dev,
 					   enum transcoder pch_transcoder,
 					   bool enable);

drivers/gpu/drm/i915/intel_pm.c

@@ -5635,33 +5635,6 @@ static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
 	}
 }
 
-static void reset_vblank_counter(struct drm_device *dev, enum pipe pipe)
-{
-	assert_spin_locked(&dev->vbl_lock);
-
-	dev->vblank[pipe].last = 0;
-}
-
-static void hsw_power_well_post_disable(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	enum pipe pipe;
-	unsigned long irqflags;
-
-	/*
-	 * After this, the registers on the pipes that are part of the power
-	 * well will become zero, so we have to adjust our counters according to
-	 * that.
-	 *
-	 * FIXME: Should we do this in general in drm_vblank_post_modeset?
-	 */
-	spin_lock_irqsave(&dev->vbl_lock, irqflags);
-	for_each_pipe(pipe)
-		if (pipe != PIPE_A)
-			reset_vblank_counter(dev, pipe);
-	spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-}
-
 static void hsw_set_power_well(struct drm_i915_private *dev_priv,
 			       struct i915_power_well *power_well, bool enable)
 {
@@ -5690,8 +5663,6 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
 			I915_WRITE(HSW_PWR_WELL_DRIVER, 0);
 			POSTING_READ(HSW_PWR_WELL_DRIVER);
 			DRM_DEBUG_KMS("Requesting to disable the power well\n");
-
-			hsw_power_well_post_disable(dev_priv);
 		}
 	}
 }
@@ -5848,23 +5819,12 @@ static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
 static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
 					   struct i915_power_well *power_well)
 {
-	struct drm_device *dev = dev_priv->dev;
-	enum pipe pipe;
-
 	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
 
 	spin_lock_irq(&dev_priv->irq_lock);
-	for_each_pipe(pipe)
-		__intel_set_cpu_fifo_underrun_reporting(dev, pipe, false);
-
 	valleyview_disable_display_irqs(dev_priv);
 	spin_unlock_irq(&dev_priv->irq_lock);
 
-	spin_lock_irq(&dev->vbl_lock);
-	for_each_pipe(pipe)
-		reset_vblank_counter(dev, pipe);
-	spin_unlock_irq(&dev->vbl_lock);
-
 	vlv_set_power_well(dev_priv, power_well, false);
 }
 

drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c

@@ -57,15 +57,8 @@ static int rcar_du_lvds_connector_get_modes(struct drm_connector *connector)
 	return 1;
 }
 
-static int rcar_du_lvds_connector_mode_valid(struct drm_connector *connector,
-					    struct drm_display_mode *mode)
-{
-	return MODE_OK;
-}
-
 static const struct drm_connector_helper_funcs connector_helper_funcs = {
 	.get_modes = rcar_du_lvds_connector_get_modes,
-	.mode_valid = rcar_du_lvds_connector_mode_valid,
 	.best_encoder = rcar_du_connector_best_encoder,
 };
 

drivers/gpu/drm/rcar-du/rcar_du_vgacon.c

@@ -25,15 +25,8 @@ static int rcar_du_vga_connector_get_modes(struct drm_connector *connector)
 	return 0;
 }
 
-static int rcar_du_vga_connector_mode_valid(struct drm_connector *connector,
-					    struct drm_display_mode *mode)
-{
-	return MODE_OK;
-}
-
 static const struct drm_connector_helper_funcs connector_helper_funcs = {
 	.get_modes = rcar_du_vga_connector_get_modes,
-	.mode_valid = rcar_du_vga_connector_mode_valid,
 	.best_encoder = rcar_du_connector_best_encoder,
 };
 

drivers/gpu/drm/shmobile/shmob_drm_crtc.c

@@ -674,12 +674,6 @@ static int shmob_drm_connector_get_modes(struct drm_connector *connector)
 	return 1;
 }
 
-static int shmob_drm_connector_mode_valid(struct drm_connector *connector,
-					  struct drm_display_mode *mode)
-{
-	return MODE_OK;
-}
-
 static struct drm_encoder *
 shmob_drm_connector_best_encoder(struct drm_connector *connector)
 {
@@ -690,7 +684,6 @@ shmob_drm_connector_best_encoder(struct drm_connector *connector)
 
 static const struct drm_connector_helper_funcs connector_helper_funcs = {
 	.get_modes = shmob_drm_connector_get_modes,
-	.mode_valid = shmob_drm_connector_mode_valid,
 	.best_encoder = shmob_drm_connector_best_encoder,
 };
 

drivers/staging/imx-drm/imx-drm-core.c

@@ -200,13 +200,6 @@ static const struct file_operations imx_drm_driver_fops = {
 	.llseek = noop_llseek,
 };
 
-int imx_drm_connector_mode_valid(struct drm_connector *connector,
-	struct drm_display_mode *mode)
-{
-	return MODE_OK;
-}
-EXPORT_SYMBOL(imx_drm_connector_mode_valid);
-
 void imx_drm_connector_destroy(struct drm_connector *connector)
 {
 	drm_sysfs_connector_remove(connector);

drivers/staging/imx-drm/imx-drm.h

@@ -50,8 +50,6 @@ int imx_drm_encoder_get_mux_id(struct device_node *node,
 int imx_drm_encoder_parse_of(struct drm_device *drm,
 	struct drm_encoder *encoder, struct device_node *np);
 
-int imx_drm_connector_mode_valid(struct drm_connector *connector,
-	struct drm_display_mode *mode);
 void imx_drm_connector_destroy(struct drm_connector *connector);
 void imx_drm_encoder_destroy(struct drm_encoder *encoder);
 

drivers/staging/imx-drm/imx-hdmi.c

@@ -1492,7 +1492,6 @@ static struct drm_connector_funcs imx_hdmi_connector_funcs = {
 
 static struct drm_connector_helper_funcs imx_hdmi_connector_helper_funcs = {
 	.get_modes = imx_hdmi_connector_get_modes,
-	.mode_valid = imx_drm_connector_mode_valid,
 	.best_encoder = imx_hdmi_connector_best_encoder,
 };
 

drivers/staging/imx-drm/imx-ldb.c

@@ -317,7 +317,6 @@ static struct drm_connector_funcs imx_ldb_connector_funcs = {
 static struct drm_connector_helper_funcs imx_ldb_connector_helper_funcs = {
 	.get_modes = imx_ldb_connector_get_modes,
 	.best_encoder = imx_ldb_connector_best_encoder,
-	.mode_valid = imx_drm_connector_mode_valid,
 };
 
 static struct drm_encoder_funcs imx_ldb_encoder_funcs = {

drivers/staging/imx-drm/imx-tve.c

@@ -251,10 +251,6 @@ static int imx_tve_connector_mode_valid(struct drm_connector *connector,
 	unsigned long rate;
 	int ret;
 
-	ret = imx_drm_connector_mode_valid(connector, mode);
-	if (ret != MODE_OK)
-		return ret;
-
 	/* pixel clock with 2x oversampling */
 	rate = clk_round_rate(tve->clk, 2000UL * mode->clock) / 2000;
 	if (rate == mode->clock)

drivers/staging/imx-drm/parallel-display.c

@@ -148,7 +148,6 @@ static struct drm_connector_funcs imx_pd_connector_funcs = {
 static struct drm_connector_helper_funcs imx_pd_connector_helper_funcs = {
 	.get_modes = imx_pd_connector_get_modes,
 	.best_encoder = imx_pd_connector_best_encoder,
-	.mode_valid = imx_drm_connector_mode_valid,
 };
 
 static struct drm_encoder_funcs imx_pd_encoder_funcs = {

include/drm/drmP.h

@@ -1024,14 +1024,17 @@ struct drm_pending_vblank_event {
 };
 
 struct drm_vblank_crtc {
+	struct drm_device *dev;		/* pointer to the drm_device */
 	wait_queue_head_t queue;	/**< VBLANK wait queue */
 	struct timeval time[DRM_VBLANKTIME_RBSIZE];	/**< timestamp of current count */
+	struct timer_list disable_timer;		/* delayed disable timer */
 	atomic_t count;			/**< number of VBLANK interrupts */
 	atomic_t refcount;		/* number of users of vblank interruptsper crtc */
 	u32 last;			/* protected by dev->vbl_lock, used */
 					/* for wraparound handling */
 	u32 last_wait;			/* Last vblank seqno waited per CRTC */
 	unsigned int inmodeset;		/* Display driver is setting mode */
+	int crtc;			/* crtc index */
 	bool enabled;			/* so we don't call enable more than
 					   once per disable */
 };
@@ -1119,7 +1122,6 @@ struct drm_device {
 
 	spinlock_t vblank_time_lock;    /**< Protects vblank count and time updates during vblank enable/disable */
 	spinlock_t vbl_lock;
-	struct timer_list vblank_disable_timer;
 
 	u32 max_vblank_count;           /**< size of vblank counter register */
 
@@ -1357,8 +1359,14 @@ extern void drm_send_vblank_event(struct drm_device *dev, int crtc,
 extern bool drm_handle_vblank(struct drm_device *dev, int crtc);
 extern int drm_vblank_get(struct drm_device *dev, int crtc);
 extern void drm_vblank_put(struct drm_device *dev, int crtc);
+extern int drm_crtc_vblank_get(struct drm_crtc *crtc);
+extern void drm_crtc_vblank_put(struct drm_crtc *crtc);
 extern void drm_vblank_off(struct drm_device *dev, int crtc);
+extern void drm_vblank_on(struct drm_device *dev, int crtc);
+extern void drm_crtc_vblank_off(struct drm_crtc *crtc);
+extern void drm_crtc_vblank_on(struct drm_crtc *crtc);
 extern void drm_vblank_cleanup(struct drm_device *dev);
+
 extern u32 drm_get_last_vbltimestamp(struct drm_device *dev, int crtc,
 				     struct timeval *tvblank, unsigned flags);
 extern int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,

include/drm/drm_crtc.h

@@ -915,6 +915,7 @@ extern const char *drm_get_tv_subconnector_name(int val);
 extern const char *drm_get_tv_select_name(int val);
 extern void drm_fb_release(struct drm_file *file_priv);
 extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group);
+extern void drm_mode_group_destroy(struct drm_mode_group *group);
 extern bool drm_probe_ddc(struct i2c_adapter *adapter);
 extern struct edid *drm_get_edid(struct drm_connector *connector,
 				 struct i2c_adapter *adapter);
@@ -1020,6 +1021,7 @@ extern int drm_mode_gamma_get_ioctl(struct drm_device *dev,
 extern int drm_mode_gamma_set_ioctl(struct drm_device *dev,
 				    void *data, struct drm_file *file_priv);
 extern u8 drm_match_cea_mode(const struct drm_display_mode *to_match);
+extern enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code);
 extern bool drm_detect_hdmi_monitor(struct edid *edid);
 extern bool drm_detect_monitor_audio(struct edid *edid);
 extern bool drm_rgb_quant_range_selectable(struct edid *edid);

include/drm/drm_crtc_helper.h

@@ -114,7 +114,7 @@ struct drm_encoder_helper_funcs {
 /**
  * drm_connector_helper_funcs - helper operations for connectors
  * @get_modes: get mode list for this connector
- * @mode_valid: is this mode valid on the given connector?
+ * @mode_valid (optional): is this mode valid on the given connector?
  *
  * The helper operations are called by the mid-layer CRTC helper.
  */

include/drm/drm_flip_work.h

@@ -57,6 +57,7 @@ typedef void (*drm_flip_func_t)(struct drm_flip_work *work, void *val);
  * @count: number of committed items
  * @func: callback fxn called for each committed item
  * @worker: worker which calls @func
+ * @fifo: queue of committed items
  */
 struct drm_flip_work {
 	const char *name;