drm/i915: Rename defines for selection of ddi buffer translation slot

Renaming the HSW-specific macros for ddi buffer translation slot to denote the
slot and not the vswing/pre-emph values as they are platform-dependent.

This patch is based on top of the patch series for renaming the DP training
vswing/pre-emph defines:
http://lists.freedesktop.org/archives/intel-gfx/2014-August/050407.html

v2: Creating single macro with argument for slot number (Damien)
v3: Adding macro for num of translation entries (Damien)

Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -5971,15 +5971,7 @@ enum punit_power_well {
 #define DDI_BUF_CTL_B				0x64100
 #define DDI_BUF_CTL(port) _PORT(port, DDI_BUF_CTL_A, DDI_BUF_CTL_B)
 #define  DDI_BUF_CTL_ENABLE			(1<<31)
-#define  DDI_BUF_EMP_400MV_0DB_HSW		(0<<24)   /* Sel0 */
-#define  DDI_BUF_EMP_400MV_3_5DB_HSW		(1<<24)   /* Sel1 */
-#define  DDI_BUF_EMP_400MV_6DB_HSW		(2<<24)   /* Sel2 */
-#define  DDI_BUF_EMP_400MV_9_5DB_HSW		(3<<24)   /* Sel3 */
-#define  DDI_BUF_EMP_600MV_0DB_HSW		(4<<24)   /* Sel4 */
-#define  DDI_BUF_EMP_600MV_3_5DB_HSW		(5<<24)   /* Sel5 */
-#define  DDI_BUF_EMP_600MV_6DB_HSW		(6<<24)   /* Sel6 */
-#define  DDI_BUF_EMP_800MV_0DB_HSW		(7<<24)   /* Sel7 */
-#define  DDI_BUF_EMP_800MV_3_5DB_HSW		(8<<24)   /* Sel8 */
+#define  DDI_BUF_TRANS_SELECT(n)	((n) << 24)
 #define  DDI_BUF_EMP_MASK			(0xf<<24)
 #define  DDI_BUF_PORT_REVERSAL			(1<<16)
 #define  DDI_BUF_IS_IDLE			(1<<7)

drivers/gpu/drm/i915/intel_ddi.c

@@ -241,18 +241,6 @@ void intel_prepare_ddi(struct drm_device *dev)
 		intel_prepare_ddi_buffers(dev, port);
 }
 
-static const long hsw_ddi_buf_ctl_values[] = {
-	DDI_BUF_EMP_400MV_0DB_HSW,
-	DDI_BUF_EMP_400MV_3_5DB_HSW,
-	DDI_BUF_EMP_400MV_6DB_HSW,
-	DDI_BUF_EMP_400MV_9_5DB_HSW,
-	DDI_BUF_EMP_600MV_0DB_HSW,
-	DDI_BUF_EMP_600MV_3_5DB_HSW,
-	DDI_BUF_EMP_600MV_6DB_HSW,
-	DDI_BUF_EMP_800MV_0DB_HSW,
-	DDI_BUF_EMP_800MV_3_5DB_HSW
-};
-
 static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
 				    enum port port)
 {
@@ -276,6 +264,8 @@ static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
  * DDI A (which is used for eDP)
  */
 
+#define NUM_FDI_TRANSLATION_ENTRIES (ARRAY_SIZE(hsw_ddi_translations_fdi) / 2)
+
 void hsw_fdi_link_train(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -312,7 +302,7 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
 
 	/* Start the training iterating through available voltages and emphasis,
 	 * testing each value twice. */
-	for (i = 0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values) * 2; i++) {
+	for (i = 0; i < NUM_FDI_TRANSLATION_ENTRIES * 2; i++) {
 		/* Configure DP_TP_CTL with auto-training */
 		I915_WRITE(DP_TP_CTL(PORT_E),
 					DP_TP_CTL_FDI_AUTOTRAIN |
@@ -327,7 +317,7 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
 		I915_WRITE(DDI_BUF_CTL(PORT_E),
 			   DDI_BUF_CTL_ENABLE |
 			   ((intel_crtc->config.fdi_lanes - 1) << 1) |
-			   hsw_ddi_buf_ctl_values[i / 2]);
+			   DDI_BUF_TRANS_SELECT(i / 2));
 		POSTING_READ(DDI_BUF_CTL(PORT_E));
 
 		udelay(600);
@@ -402,7 +392,7 @@ void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder)
 		enc_to_dig_port(&encoder->base);
 
 	intel_dp->DP = intel_dig_port->saved_port_bits |
-		DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW;
+		DDI_BUF_CTL_ENABLE | DDI_BUF_TRANS_SELECT(0);
 	intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count);
 
 }

drivers/gpu/drm/i915/intel_dp.c

@@ -2892,29 +2892,29 @@ intel_hsw_signal_levels(uint8_t train_set)
 					 DP_TRAIN_PRE_EMPHASIS_MASK);
 	switch (signal_levels) {
 	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
-		return DDI_BUF_EMP_400MV_0DB_HSW;
+		return DDI_BUF_TRANS_SELECT(0);
 	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
-		return DDI_BUF_EMP_400MV_3_5DB_HSW;
+		return DDI_BUF_TRANS_SELECT(1);
 	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
-		return DDI_BUF_EMP_400MV_6DB_HSW;
+		return DDI_BUF_TRANS_SELECT(2);
 	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_9_5:
-		return DDI_BUF_EMP_400MV_9_5DB_HSW;
+		return DDI_BUF_TRANS_SELECT(3);
 
 	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
-		return DDI_BUF_EMP_600MV_0DB_HSW;
+		return DDI_BUF_TRANS_SELECT(4);
 	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
-		return DDI_BUF_EMP_600MV_3_5DB_HSW;
+		return DDI_BUF_TRANS_SELECT(5);
 	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6:
-		return DDI_BUF_EMP_600MV_6DB_HSW;
+		return DDI_BUF_TRANS_SELECT(6);
 
 	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
-		return DDI_BUF_EMP_800MV_0DB_HSW;
+		return DDI_BUF_TRANS_SELECT(7);
 	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
-		return DDI_BUF_EMP_800MV_3_5DB_HSW;
+		return DDI_BUF_TRANS_SELECT(8);
 	default:
 		DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
 			      "0x%x\n", signal_levels);
-		return DDI_BUF_EMP_400MV_0DB_HSW;
+		return DDI_BUF_TRANS_SELECT(0);
 	}
 }