Merge tag 'wireless-drivers-next-for-davem-2015-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Add vendor directories (for example intel, marvell and so on) to
drivers/net/wireless and change the menuconfig to follow the same
categorisation. This unifies the directory layout as we already had few drivers
already using vendor directories (especially ath and ti).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -388,7 +388,7 @@ ADM8211 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/
 S:	Orphan
-F:	drivers/net/wireless/adm8211.*
+F:	drivers/net/wireless/admtek/adm8211.*
 
 ADP1653 FLASH CONTROLLER DRIVER
 M:	Sakari Ailus <sakari.ailus@iki.fi>
@@ -1992,7 +1992,7 @@ L:	linux-wireless@vger.kernel.org
 W:	http://www.thekelleys.org.uk/atmel
 W:	http://atmelwlandriver.sourceforge.net/
 S:	Maintained
-F:	drivers/net/wireless/atmel*
+F:	drivers/net/wireless/atmel/atmel*
 
 ATMEL MAXTOUCH DRIVER
 M:	Nick Dyer <nick.dyer@itdev.co.uk>
@@ -2081,7 +2081,7 @@ L:	linux-wireless@vger.kernel.org
 L:	b43-dev@lists.infradead.org
 W:	http://wireless.kernel.org/en/users/Drivers/b43
 S:	Odd Fixes
-F:	drivers/net/wireless/b43/
+F:	drivers/net/wireless/broadcom/b43/
 
 B43LEGACY WIRELESS DRIVER
 M:	Larry Finger <Larry.Finger@lwfinger.net>
@@ -2089,7 +2089,7 @@ L:	linux-wireless@vger.kernel.org
 L:	b43-dev@lists.infradead.org
 W:	http://wireless.kernel.org/en/users/Drivers/b43
 S:	Maintained
-F:	drivers/net/wireless/b43legacy/
+F:	drivers/net/wireless/broadcom/b43legacy/
 
 BACKLIGHT CLASS/SUBSYSTEM
 M:	Jingoo Han <jingoohan1@gmail.com>
@@ -2391,7 +2391,7 @@ M:	Hante Meuleman <meuleman@broadcom.com>
 L:	linux-wireless@vger.kernel.org
 L:	brcm80211-dev-list@broadcom.com
 S:	Supported
-F:	drivers/net/wireless/brcm80211/
+F:	drivers/net/wireless/broadcom/brcm80211/
 
 BROADCOM BNX2FC 10 GIGABIT FCOE DRIVER
 M:	QLogic-Storage-Upstream@qlogic.com
@@ -3101,7 +3101,7 @@ F:	sound/pci/cs5535audio/
 CW1200 WLAN driver
 M:	Solomon Peachy <pizza@shaftnet.org>
 S:	Maintained
-F:	drivers/net/wireless/cw1200/
+F:	drivers/net/wireless/st/cw1200/
 
 CX18 VIDEO4LINUX DRIVER
 M:	Andy Walls <awalls@md.metrocast.net>
@@ -5041,7 +5041,7 @@ L:	hostap@shmoo.com (subscribers-only)
 L:	linux-wireless@vger.kernel.org
 W:	http://hostap.epitest.fi/
 S:	Maintained
-F:	drivers/net/wireless/hostap/
+F:	drivers/net/wireless/intersil/hostap/
 
 HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
 L:	platform-driver-x86@vger.kernel.org
@@ -5609,7 +5609,7 @@ L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/README.ipw2100
 F:	Documentation/networking/README.ipw2200
-F:	drivers/net/wireless/ipw2x00/
+F:	drivers/net/wireless/intel/ipw2x00/
 
 INTEL(R) TRACE HUB
 M:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
@@ -5643,7 +5643,7 @@ INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy)
 M:	Stanislaw Gruszka <sgruszka@redhat.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
-F:	drivers/net/wireless/iwlegacy/
+F:	drivers/net/wireless/intel/iwlegacy/
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
 M:	Johannes Berg <johannes.berg@intel.com>
@@ -5653,7 +5653,7 @@ L:	linux-wireless@vger.kernel.org
 W:	http://intellinuxwireless.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git
 S:	Supported
-F:	drivers/net/wireless/iwlwifi/
+F:	drivers/net/wireless/intel/iwlwifi/
 
 INTEL MANAGEMENT ENGINE (mei)
 M:	Tomas Winkler <tomas.winkler@intel.com>
@@ -6703,7 +6703,7 @@ F:	drivers/net/ethernet/marvell/sk*
 MARVELL LIBERTAS WIRELESS DRIVER
 L:	libertas-dev@lists.infradead.org
 S:	Orphan
-F:	drivers/net/wireless/libertas/
+F:	drivers/net/wireless/marvell/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
@@ -6723,13 +6723,13 @@ M:	Amitkumar Karwar <akarwar@marvell.com>
 M:	Nishant Sarmukadam <nishants@marvell.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-F:	drivers/net/wireless/mwifiex/
+F:	drivers/net/wireless/marvell/mwifiex/
 
 MARVELL MWL8K WIRELESS DRIVER
 M:	Lennert Buytenhek <buytenh@wantstofly.org>
 L:	linux-wireless@vger.kernel.org
 S:	Odd Fixes
-F:	drivers/net/wireless/mwl8k.c
+F:	drivers/net/wireless/marvell/mwl8k.c
 
 MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
 M:	Nicolas Pitre <nico@fluxnic.net>
@@ -7933,7 +7933,7 @@ L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/orinoco
 W:	http://www.nongnu.org/orinoco/
 S:	Orphan
-F:	drivers/net/wireless/orinoco/
+F:	drivers/net/wireless/intersil/orinoco/
 
 OSD LIBRARY and FILESYSTEM
 M:	Boaz Harrosh <ooo@electrozaur.com>
@@ -7959,7 +7959,7 @@ M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/p54
 S:	Maintained
-F:	drivers/net/wireless/p54/
+F:	drivers/net/wireless/intersil/p54/
 
 PA SEMI ETHERNET DRIVER
 M:	Olof Johansson <olof@lixom.net>
@@ -8501,7 +8501,7 @@ M:	"Luis R. Rodriguez" <mcgrof@gmail.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/p54
 S:	Obsolete
-F:	drivers/net/wireless/prism54/
+F:	drivers/net/wireless/intersil/prism54/
 
 PS3 NETWORK SUPPORT
 M:	Geoff Levand <geoff@infradead.org>
@@ -8804,7 +8804,7 @@ M:	Stanislaw Gruszka <sgruszka@redhat.com>
 M:	Helmut Schaa <helmut.schaa@googlemail.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-F:	drivers/net/wireless/rt2x00/
+F:	drivers/net/wireless/ralink/rt2x00/
 
 RAMDISK RAM BLOCK DEVICE DRIVER
 M:	Jens Axboe <axboe@kernel.dk>
@@ -9038,7 +9038,7 @@ L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 S:	Orphan
-F:	drivers/net/wireless/rtl818x/rtl8180/
+F:	drivers/net/wireless/realtek/rtl818x/rtl8180/
 
 RTL8187 WIRELESS DRIVER
 M:	Herton Ronaldo Krzesinski <herton@canonical.com>
@@ -9048,7 +9048,7 @@ L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 S:	Maintained
-F:	drivers/net/wireless/rtl818x/rtl8187/
+F:	drivers/net/wireless/realtek/rtl818x/rtl8187/
 
 RTL8192CE WIRELESS DRIVER
 M:	Larry Finger <Larry.Finger@lwfinger.net>
@@ -9057,8 +9057,8 @@ L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 S:	Maintained
-F:	drivers/net/wireless/rtlwifi/
-F:	drivers/net/wireless/rtlwifi/rtl8192ce/
+F:	drivers/net/wireless/realtek/rtlwifi/
+F:	drivers/net/wireless/realtek/rtlwifi/rtl8192ce/
 
 RTL8XXXU WIRELESS DRIVER (rtl8xxxu)
 M:	Jes Sorensen <Jes.Sorensen@redhat.com>
@@ -11255,7 +11255,7 @@ USB ZD1201 DRIVER
 L:	linux-wireless@vger.kernel.org
 W:	http://linux-lc100020.sourceforge.net
 S:	Orphan
-F:	drivers/net/wireless/zd1201.*
+F:	drivers/net/wireless/zydas/zd1201.*
 
 USB ZR364XX DRIVER
 M:	Antoine Jacquet <royale@zerezo.com>
@@ -11886,7 +11886,7 @@ W:	http://zd1211.ath.cx/wiki/DriverRewrite
 L:	linux-wireless@vger.kernel.org
 L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
 S:	Maintained
-F:	drivers/net/wireless/zd1211rw/
+F:	drivers/net/wireless/zydas/zd1211rw/
 
 ZPOOL COMPRESSED PAGE STORAGE API
 M:	Dan Streetman <ddstreet@ieee.org>

drivers/net/wireless/Kconfig

@@ -17,6 +17,22 @@ menuconfig WLAN
 
 if WLAN
 
+source "drivers/net/wireless/admtek/Kconfig"
+source "drivers/net/wireless/ath/Kconfig"
+source "drivers/net/wireless/atmel/Kconfig"
+source "drivers/net/wireless/broadcom/Kconfig"
+source "drivers/net/wireless/cisco/Kconfig"
+source "drivers/net/wireless/intel/Kconfig"
+source "drivers/net/wireless/intersil/Kconfig"
+source "drivers/net/wireless/marvell/Kconfig"
+source "drivers/net/wireless/mediatek/Kconfig"
+source "drivers/net/wireless/ralink/Kconfig"
+source "drivers/net/wireless/realtek/Kconfig"
+source "drivers/net/wireless/rsi/Kconfig"
+source "drivers/net/wireless/st/Kconfig"
+source "drivers/net/wireless/ti/Kconfig"
+source "drivers/net/wireless/zydas/Kconfig"
+
 config PCMCIA_RAYCS
 	tristate "Aviator/Raytheon 2.4GHz wireless support"
 	depends on PCMCIA
@@ -32,110 +48,6 @@ config PCMCIA_RAYCS
 	  To compile this driver as a module, choose M here: the module will be
 	  called ray_cs.  If unsure, say N.
 
-config LIBERTAS_THINFIRM
-	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
-	depends on MAC80211
-	select FW_LOADER
-	---help---
-	  A library for Marvell Libertas 8xxx devices using thinfirm.
-
-config LIBERTAS_THINFIRM_DEBUG
-	bool "Enable full debugging output in the Libertas thin firmware module."
-	depends on LIBERTAS_THINFIRM
-	---help---
-	  Debugging support.
-
-config LIBERTAS_THINFIRM_USB
-	tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
-	depends on LIBERTAS_THINFIRM && USB
-	---help---
-	  A driver for Marvell Libertas 8388 USB devices using thinfirm.
-
-config AIRO
-	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
-	depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN)
-	select WIRELESS_EXT
-	select CRYPTO
-	select WEXT_SPY
-	select WEXT_PRIV
-	---help---
-	  This is the standard Linux driver to support Cisco/Aironet ISA and
-	  PCI 802.11 wireless cards.
-	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
-	  - with or without encryption) as well as card before the Cisco
-	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
-
-	  This driver support both the standard Linux Wireless Extensions
-	  and Cisco proprietary API, so both the Linux Wireless Tools and the
-	  Cisco Linux utilities can be used to configure the card.
-
-	  The driver can be compiled as a module and will be named "airo".
-
-config ATMEL
-      tristate "Atmel at76c50x chipset  802.11b support"
-      depends on CFG80211 && (PCI || PCMCIA)
-      select WIRELESS_EXT
-      select WEXT_PRIV
-      select FW_LOADER
-      select CRC32
-       ---help---
-        A driver 802.11b wireless cards based on the Atmel fast-vnet
-        chips. This driver supports standard Linux wireless extensions.
-
-        Many  cards based on this chipset do not have flash memory
-        and need their firmware loaded at start-up. If yours is
-        one of these, you will need to provide a firmware image
-        to be loaded into the card by the driver. The Atmel
-        firmware package can be downloaded from
-        <http://www.thekelleys.org.uk/atmel>
-
-config PCI_ATMEL
-      tristate "Atmel at76c506 PCI cards"
-      depends on ATMEL && PCI
-       ---help---
-        Enable support for PCI and mini-PCI cards containing the
-        Atmel at76c506 chip.
-
-config PCMCIA_ATMEL
-	tristate "Atmel at76c502/at76c504 PCMCIA cards"
-	depends on ATMEL && PCMCIA
-	select WIRELESS_EXT
-	select FW_LOADER
-	select CRC32
-	---help---
-	  Enable support for PCMCIA cards containing the
-	  Atmel at76c502 and at76c504 chips.
-
-config AT76C50X_USB
-        tristate "Atmel at76c503/at76c505/at76c505a USB cards"
-        depends on MAC80211 && USB
-        select FW_LOADER
-        ---help---
-          Enable support for USB Wireless devices using Atmel at76c503,
-          at76c505 or at76c505a chips.
-
-config AIRO_CS
-	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
-	depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	select CRYPTO
-	select CRYPTO_AES
-	---help---
-	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
-	  802.11 wireless cards.  This driver is the same as the Aironet
-	  driver part of the Linux Pcmcia package.
-	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
-	  - with or without encryption) as well as card before the Cisco
-	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
-	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
-	  802.11b cards.
-
-	  This driver support both the standard Linux Wireless Extensions
-	  and Cisco proprietary API, so both the Linux Wireless Tools and the
-	  Cisco Linux utilities can be used to configure the card.
-
 config PCMCIA_WL3501
 	tristate "Planet WL3501 PCMCIA cards"
 	depends on CFG80211 && PCMCIA
@@ -146,44 +58,18 @@ config PCMCIA_WL3501
 	  It has basic support for Linux wireless extensions and initial
 	  micro support for ethtool.
 
-config PRISM54
-	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
-	depends on PCI
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	select FW_LOADER
-	---help---
-	  This enables support for FullMAC PCI/Cardbus prism54 devices. This
-	  driver is now deprecated in favor for the SoftMAC driver, p54pci.
-	  p54pci supports FullMAC PCI/Cardbus devices as well.
-
-	  For more information refer to the p54 wiki:
-
-	  http://wireless.kernel.org/en/users/Drivers/p54
-
-	  Note: You need a motherboard with DMA support to use any of these cards
-
-	  When built as module you get the module prism54
-
-config USB_ZD1201
-	tristate "USB ZD1201 based Wireless device support"
-	depends on CFG80211 && USB
-	select WIRELESS_EXT
-	select WEXT_PRIV
-	select FW_LOADER
+config MAC80211_HWSIM
+	tristate "Simulated radio testing tool for mac80211"
+	depends on MAC80211
 	---help---
-	  Say Y if you want to use wireless LAN adapters based on the ZyDAS
-	  ZD1201 chip.
-
-	  This driver makes the adapter appear as a normal Ethernet interface,
-	  typically on wlan0.
-
-	  The zd1201 device requires external firmware to be loaded.
-	  This can be found at http://linux-lc100020.sourceforge.net/
+	  This driver is a developer testing tool that can be used to test
+	  IEEE 802.11 networking stack (mac80211) functionality. This is not
+	  needed for normal wireless LAN usage and is only for testing. See
+	  Documentation/networking/mac80211_hwsim for more information on how
+	  to use this tool.
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called zd1201.
+	  To compile this driver as a module, choose M here: the module will be
+	  called mac80211_hwsim.  If unsure, say N.
 
 config USB_NET_RNDIS_WLAN
 	tristate "Wireless RNDIS USB support"
@@ -214,76 +100,4 @@ config USB_NET_RNDIS_WLAN
 
 	  If you choose to build a module, it'll be called rndis_wlan.
 
-config ADM8211
-	tristate "ADMtek ADM8211 support"
-	depends on MAC80211 && PCI
-	select CRC32
-	select EEPROM_93CX6
-	---help---
-	  This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
-	  These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
-
-	  Xterasys Cardbus XN-2411b
-	  Blitz NetWave Point PC
-	  TrendNet 221pc
-	  Belkin F5D6001
-	  SMC 2635W
-	  Linksys WPC11 v1
-	  Fiberline FL-WL-200X
-	  3com Office Connect (3CRSHPW796)
-	  Corega WLPCIB-11
-	  SMC 2602W V2 EU
-	  D-Link DWL-520 Revision C
-
-	  However, some of these cards have been replaced with other chips
-	  like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
-	  the Ralink RT2400 (SMC2635W) without a model number change.
-
-	  Thanks to Infineon-ADMtek for their support of this driver.
-
-source "drivers/net/wireless/realtek/rtl818x/Kconfig"
-
-config MAC80211_HWSIM
-	tristate "Simulated radio testing tool for mac80211"
-	depends on MAC80211
-	---help---
-	  This driver is a developer testing tool that can be used to test
-	  IEEE 802.11 networking stack (mac80211) functionality. This is not
-	  needed for normal wireless LAN usage and is only for testing. See
-	  Documentation/networking/mac80211_hwsim for more information on how
-	  to use this tool.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called mac80211_hwsim.  If unsure, say N.
-
-config MWL8K
-	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
-	depends on MAC80211 && PCI
-	---help---
-	  This driver supports Marvell TOPDOG 802.11 wireless cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called mwl8k.  If unsure, say N.
-
-source "drivers/net/wireless/ath/Kconfig"
-source "drivers/net/wireless/b43/Kconfig"
-source "drivers/net/wireless/b43legacy/Kconfig"
-source "drivers/net/wireless/brcm80211/Kconfig"
-source "drivers/net/wireless/hostap/Kconfig"
-source "drivers/net/wireless/ipw2x00/Kconfig"
-source "drivers/net/wireless/iwlwifi/Kconfig"
-source "drivers/net/wireless/iwlegacy/Kconfig"
-source "drivers/net/wireless/libertas/Kconfig"
-source "drivers/net/wireless/orinoco/Kconfig"
-source "drivers/net/wireless/p54/Kconfig"
-source "drivers/net/wireless/rt2x00/Kconfig"
-source "drivers/net/wireless/mediatek/Kconfig"
-source "drivers/net/wireless/realtek/rtlwifi/Kconfig"
-source "drivers/net/wireless/realtek/rtl8xxxu/Kconfig"
-source "drivers/net/wireless/ti/Kconfig"
-source "drivers/net/wireless/zd1211rw/Kconfig"
-source "drivers/net/wireless/mwifiex/Kconfig"
-source "drivers/net/wireless/cw1200/Kconfig"
-source "drivers/net/wireless/rsi/Kconfig"
-
 endif # WLAN

drivers/net/wireless/Makefile

@@ -2,27 +2,21 @@
 # Makefile for the Linux Wireless network device drivers.
 #
 
-obj-$(CONFIG_IPW2100) += ipw2x00/
-obj-$(CONFIG_IPW2200) += ipw2x00/
-
-obj-$(CONFIG_HERMES)		+= orinoco/
-
-obj-$(CONFIG_AIRO)		+= airo.o
-obj-$(CONFIG_AIRO_CS)		+= airo_cs.o airo.o
-
-obj-$(CONFIG_ATMEL)             += atmel.o
-obj-$(CONFIG_PCI_ATMEL)         += atmel_pci.o 
-obj-$(CONFIG_PCMCIA_ATMEL)      += atmel_cs.o
-
-obj-$(CONFIG_AT76C50X_USB)      += at76c50x-usb.o
-
-obj-$(CONFIG_PRISM54)		+= prism54/
-
-obj-$(CONFIG_HOSTAP)		+= hostap/
-obj-$(CONFIG_B43)		+= b43/
-obj-$(CONFIG_B43LEGACY)		+= b43legacy/
-obj-$(CONFIG_ZD1211RW)		+= zd1211rw/
-obj-$(CONFIG_WLAN)		+= realtek/
+obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/
+obj-$(CONFIG_WLAN_VENDOR_ATH) += ath/
+obj-$(CONFIG_WLAN_VENDOR_ATMEL) += atmel/
+obj-$(CONFIG_WLAN_VENDOR_BROADCOM) += broadcom/
+obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/
+obj-$(CONFIG_WLAN_VENDOR_INTEL) += intel/
+obj-$(CONFIG_WLAN_VENDOR_INTERSIL) += intersil/
+obj-$(CONFIG_WLAN_VENDOR_MARVELL) += marvell/
+obj-$(CONFIG_WLAN_VENDOR_MEDIATEK) += mediatek/
+obj-$(CONFIG_WLAN_VENDOR_RALINK) += ralink/
+obj-$(CONFIG_WLAN_VENDOR_REALTEK) += realtek/
+obj-$(CONFIG_WLAN_VENDOR_RSI) += rsi/
+obj-$(CONFIG_WLAN_VENDOR_ST) += st/
+obj-$(CONFIG_WLAN_VENDOR_TI) += ti/
+obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/
 
 # 16-bit wireless PCMCIA client drivers
 obj-$(CONFIG_PCMCIA_RAYCS)	+= ray_cs.o
@@ -30,33 +24,4 @@ obj-$(CONFIG_PCMCIA_WL3501)	+= wl3501_cs.o
 
 obj-$(CONFIG_USB_NET_RNDIS_WLAN)	+= rndis_wlan.o
 
-obj-$(CONFIG_USB_ZD1201)	+= zd1201.o
-obj-$(CONFIG_LIBERTAS)		+= libertas/
-
-obj-$(CONFIG_LIBERTAS_THINFIRM)	+= libertas_tf/
-
-obj-$(CONFIG_ADM8211)	+= adm8211.o
-
-obj-$(CONFIG_MWL8K)	+= mwl8k.o
-
-obj-$(CONFIG_IWLWIFI)	+= iwlwifi/
-obj-$(CONFIG_IWLEGACY)	+= iwlegacy/
-obj-$(CONFIG_RT2X00)	+= rt2x00/
-
-obj-$(CONFIG_WL_MEDIATEK)	+= mediatek/
-
-obj-$(CONFIG_P54_COMMON)	+= p54/
-
-obj-$(CONFIG_ATH_CARDS)		+= ath/
-
 obj-$(CONFIG_MAC80211_HWSIM)	+= mac80211_hwsim.o
-
-obj-$(CONFIG_WL_TI)	+= ti/
-
-obj-$(CONFIG_MWIFIEX)	+= mwifiex/
-
-obj-$(CONFIG_BRCMFMAC)	+= brcm80211/
-obj-$(CONFIG_BRCMSMAC)	+= brcm80211/
-
-obj-$(CONFIG_CW1200)	+= cw1200/
-obj-$(CONFIG_RSI_91X)	+= rsi/

drivers/net/wireless/admtek/Kconfig

@@ -0,0 +1,41 @@
+config WLAN_VENDOR_ADMTEK
+	bool "ADMtek devices"
+	default y
+	---help---
+	  If you have a wireless card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about  cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if WLAN_VENDOR_ADMTEK
+
+config ADM8211
+	tristate "ADMtek ADM8211 support"
+	depends on MAC80211 && PCI
+	select CRC32
+	select EEPROM_93CX6
+	---help---
+	  This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
+	  These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
+
+	  Xterasys Cardbus XN-2411b
+	  Blitz NetWave Point PC
+	  TrendNet 221pc
+	  Belkin F5D6001
+	  SMC 2635W
+	  Linksys WPC11 v1
+	  Fiberline FL-WL-200X
+	  3com Office Connect (3CRSHPW796)
+	  Corega WLPCIB-11
+	  SMC 2602W V2 EU
+	  D-Link DWL-520 Revision C
+
+	  However, some of these cards have been replaced with other chips
+	  like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
+	  the Ralink RT2400 (SMC2635W) without a model number change.
+
+	  Thanks to Infineon-ADMtek for their support of this driver.
+
+endif # WLAN_VENDOR_ADMTEK

drivers/net/wireless/admtek/Makefile

@@ -0,0 +1 @@
+obj-$(CONFIG_ADM8211)	+= adm8211.o

drivers/net/wireless/ath/Kconfig

@@ -1,13 +1,16 @@
 config ATH_COMMON
 	tristate
 
-menuconfig ATH_CARDS
-	tristate "Atheros Wireless Cards"
-	depends on CFG80211 && (!UML || BROKEN)
+config WLAN_VENDOR_ATH
+	bool "Atheros/Qualcomm devices"
+	default y
 	---help---
-	  This will enable the support for the Atheros wireless drivers.
-	  ath5k, ath9k, ath9k_htc and ar9170 drivers share some common code, this option
-	  enables the common ath.ko module which shares common helpers.
+	  If you have a wireless card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about  cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
 
 	  For more information and documentation on this module you can visit:
 
@@ -17,7 +20,7 @@ menuconfig ATH_CARDS
 
 	  http://wireless.kernel.org/en/users/Drivers/Atheros
 
-if ATH_CARDS
+if WLAN_VENDOR_ATH
 
 config ATH_DEBUG
 	bool "Atheros wireless debugging"

drivers/net/wireless/atmel/Kconfig

@@ -0,0 +1,57 @@
+config WLAN_VENDOR_ATMEL
+	bool "Atmel devices"
+	default y
+	---help---
+	  If you have a wireless card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about  cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if WLAN_VENDOR_ATMEL
+
+config ATMEL
+      tristate "Atmel at76c50x chipset  802.11b support"
+      depends on CFG80211 && (PCI || PCMCIA)
+      select WIRELESS_EXT
+      select WEXT_PRIV
+      select FW_LOADER
+      select CRC32
+       ---help---
+        A driver 802.11b wireless cards based on the Atmel fast-vnet
+        chips. This driver supports standard Linux wireless extensions.
+
+        Many  cards based on this chipset do not have flash memory
+        and need their firmware loaded at start-up. If yours is
+        one of these, you will need to provide a firmware image
+        to be loaded into the card by the driver. The Atmel
+        firmware package can be downloaded from
+        <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+      tristate "Atmel at76c506 PCI cards"
+      depends on ATMEL && PCI
+       ---help---
+        Enable support for PCI and mini-PCI cards containing the
+        Atmel at76c506 chip.
+
+config PCMCIA_ATMEL
+	tristate "Atmel at76c502/at76c504 PCMCIA cards"
+	depends on ATMEL && PCMCIA
+	select WIRELESS_EXT
+	select FW_LOADER
+	select CRC32
+	---help---
+	  Enable support for PCMCIA cards containing the
+	  Atmel at76c502 and at76c504 chips.
+
+config AT76C50X_USB
+        tristate "Atmel at76c503/at76c505/at76c505a USB cards"
+        depends on MAC80211 && USB
+        select FW_LOADER
+        ---help---
+          Enable support for USB Wireless devices using Atmel at76c503,
+          at76c505 or at76c505a chips.
+
+endif # WLAN_VENDOR_ATMEL

drivers/net/wireless/atmel/Makefile

@@ -0,0 +1,5 @@
+obj-$(CONFIG_ATMEL)             += atmel.o
+obj-$(CONFIG_PCI_ATMEL)         += atmel_pci.o 
+obj-$(CONFIG_PCMCIA_ATMEL)      += atmel_cs.o
+
+obj-$(CONFIG_AT76C50X_USB)      += at76c50x-usb.o

drivers/net/wireless/broadcom/Kconfig

@@ -0,0 +1,18 @@
+config WLAN_VENDOR_BROADCOM
+	bool "Broadcom devices"
+	default y
+	---help---
+	  If you have a wireless card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about  cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if WLAN_VENDOR_BROADCOM
+
+source "drivers/net/wireless/broadcom/b43/Kconfig"
+source "drivers/net/wireless/broadcom/b43legacy/Kconfig"
+source "drivers/net/wireless/broadcom/brcm80211/Kconfig"
+
+endif # WLAN_VENDOR_BROADCOM

drivers/net/wireless/broadcom/Makefile

@@ -0,0 +1,5 @@
+obj-$(CONFIG_B43)		+= b43/
+obj-$(CONFIG_B43LEGACY)		+= b43legacy/
+
+obj-$(CONFIG_BRCMFMAC)	+= brcm80211/
+obj-$(CONFIG_BRCMSMAC)	+= brcm80211/