i2c: designware-pci: remove Moorestown support

The Moorestown support bits were removed few years ago. This is a follow up to
that changes.

Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-designware-pcidrv.c

@@ -40,10 +40,6 @@
 #define DRIVER_NAME "i2c-designware-pci"
 
 enum dw_pci_ctl_id_t {
-	moorestown_0,
-	moorestown_1,
-	moorestown_2,
-
 	medfield_0,
 	medfield_1,
 	medfield_2,
@@ -102,27 +98,6 @@ static struct dw_scl_sda_cfg hsw_config = {
 };
 
 static struct  dw_pci_controller  dw_pci_controllers[] = {
-	[moorestown_0] = {
-		.bus_num     = 0,
-		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.clk_khz      = 25000,
-	},
-	[moorestown_1] = {
-		.bus_num     = 1,
-		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.clk_khz      = 25000,
-	},
-	[moorestown_2] = {
-		.bus_num     = 2,
-		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
-		.tx_fifo_depth = 32,
-		.rx_fifo_depth = 32,
-		.clk_khz      = 25000,
-	},
 	[medfield_0] = {
 		.bus_num     = 0,
 		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
@@ -325,10 +300,6 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
 MODULE_ALIAS("i2c_designware-pci");
 
 static const struct pci_device_id i2_designware_pci_ids[] = {
-	/* Moorestown */
-	{ PCI_VDEVICE(INTEL, 0x0802), moorestown_0 },
-	{ PCI_VDEVICE(INTEL, 0x0803), moorestown_1 },
-	{ PCI_VDEVICE(INTEL, 0x0804), moorestown_2 },
 	/* Medfield */
 	{ PCI_VDEVICE(INTEL, 0x0817), medfield_3,},
 	{ PCI_VDEVICE(INTEL, 0x0818), medfield_4 },