MIPS: generic: Add support for MIPSfpga

Add support for the MIPSfpga platform to generic kernel.

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15846/
[jhogan@kernel.org: Use separate board-xilfpga.its.S. Add 32r2 and
 little endian requires to board-xilfpga.config]
Signed-off-by: James Hogan <jhogan@kernel.org>

arch/mips/boot/dts/xilfpga/Makefile

@@ -1,4 +1,4 @@
-dtb-$(CONFIG_XILFPGA_NEXYS4DDR)	+= nexys4ddr.dtb
+dtb-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= nexys4ddr.dtb
 
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 

arch/mips/boot/dts/xilfpga/nexys4ddr.dts

@@ -5,6 +5,14 @@
 / {
 	compatible = "digilent,nexys4ddr";
 
+	aliases {
+		serial0 = &axi_uart16550;
+	};
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x08000000>;

arch/mips/configs/generic/board-xilfpga.config

@@ -0,0 +1,22 @@
+# require CONFIG_CPU_MIPS32_R2=y
+# require CONFIG_CPU_LITTLE_ENDIAN=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_XILINX=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_FIT_IMAGE_FDT_XILFPGA=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_XILINX=y
+CONFIG_SENSORS_ADT7410=y
+CONFIG_TMPFS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETDEVICES=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SMSC_PHY=y

arch/mips/generic/Kconfig

@@ -42,4 +42,10 @@ config FIT_IMAGE_FDT_NI169445
 	  Enable this to include the FDT for the 169445 platform from
 	  National Instruments in the FIT kernel image.
 
+config FIT_IMAGE_FDT_XILFPGA
+	bool "Include FDT for Xilfpga"
+	help
+	  Enable this to include the FDT for the MIPSfpga platform
+	  from Imagination Technologies in the FIT kernel image.
+
 endif

arch/mips/generic/board-xilfpga.its.S

@@ -0,0 +1,22 @@
+/ {
+	images {
+		fdt@xilfpga {
+			description = "MIPSfpga (xilfpga) Device Tree";
+			data = /incbin/("boot/dts/xilfpga/nexys4ddr.dtb");
+			type = "flat_dt";
+			arch = "mips";
+			compression = "none";
+			hash@0 {
+				algo = "sha1";
+			};
+		};
+	};
+
+	configurations {
+		conf@xilfpga {
+			description = "MIPSfpga Linux kernel";
+			kernel = "kernel@0";
+			fdt = "fdt@xilfpga";
+		};
+	};
+};