Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Four minor merge conflicts:

1) qca_spi.c renamed the local variable used for the SPI device
   from spi_device to spi, meanwhile the spi_set_drvdata() call
   got moved further up in the probe function.

2) Two changes were both adding new members to codel params
   structure, and thus we had overlapping changes to the
   initializer function.

3) 'net' was making a fix to sk_release_kernel() which is
   completely removed in 'net-next'.

4) In net_namespace.c, the rtnl_net_fill() call for GET operations
   had the command value fixed, meanwhile 'net-next' adjusted the
   argument signature a bit.

This also matches example merge resolutions posted by Stephen
Rothwell over the past two days.

Signed-off-by: David S. Miller <davem@davemloft.net>

CREDITS

@@ -3709,6 +3709,13 @@ N: Dirk Verworner
 D: Co-author of German book ``Linux-Kernel-Programmierung''
 D: Co-founder of Berlin Linux User Group
 
+N: Andrew Victor
+E: linux@maxim.org.za
+W: http://maxim.org.za/at91_26.html
+D: First maintainer of Atmel ARM-based SoC, aka AT91
+D: Introduced support for at91rm9200, the first chip of AT91 family
+S: South Africa
+
 N: Riku Voipio
 E: riku.voipio@iki.fi
 D: Author of PCA9532 LED and Fintek f75375s hwmon driver

Documentation/IPMI.txt

@@ -505,7 +505,10 @@ at module load time (for a module) with:
 
 The addresses are normal I2C addresses.  The adapter is the string
 name of the adapter, as shown in /sys/class/i2c-adapter/i2c-<n>/name.
-It is *NOT* i2c-<n> itself.
+It is *NOT* i2c-<n> itself.  Also, the comparison is done ignoring
+spaces, so if the name is "This is an I2C chip" you can say
+adapter_name=ThisisanI2cchip.  This is because it's hard to pass in
+spaces in kernel parameters.
 
 The debug flags are bit flags for each BMC found, they are:
 IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8

Documentation/acpi/enumeration.txt

@@ -253,7 +253,7 @@ input driver:
 GPIO support
 ~~~~~~~~~~~~
 ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
-and GpioInt. These resources are used be used to pass GPIO numbers used by
+and GpioInt. These resources can be used to pass GPIO numbers used by
 the device to the driver. ACPI 5.1 extended this with _DSD (Device
 Specific Data) which made it possible to name the GPIOs among other things.
 

Documentation/acpi/gpio-properties.txt

@@ -1,9 +1,9 @@
 _DSD Device Properties Related to GPIO
 --------------------------------------
 
-With the release of ACPI 5.1 and the _DSD configuration objecte names
-can finally be given to GPIOs (and other things as well) returned by
-_CRS.  Previously, we were only able to use an integer index to find
+With the release of ACPI 5.1, the _DSD configuration object finally
+allows names to be given to GPIOs (and other things as well) returned
+by _CRS.  Previously, we were only able to use an integer index to find
 the corresponding GPIO, which is pretty error prone (it depends on
 the _CRS output ordering, for example).
 

Documentation/devicetree/bindings/arm/omap/l3-noc.txt

@@ -6,6 +6,7 @@ provided by Arteris.
 Required properties:
 - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
                Should be "ti,omap4-l3-noc" for OMAP4 family
+               Should be "ti,omap5-l3-noc" for OMAP5 family
 	       Should be "ti,dra7-l3-noc" for DRA7 family
                Should be "ti,am4372-l3-noc" for AM43 family
 - reg:	Contains L3 register address range for each noc domain.

Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt

@@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 {
 		      80 81 68 69
 		      70 71 72 73
 		      74 75 76 77>;
-	interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+	interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 			  "saif0", "saif1", "i2c0", "i2c1",
 			  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 			  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";

Documentation/devicetree/bindings/rtc/abracon,abx80x.txt

@@ -0,0 +1,30 @@
+Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
+ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
+is the superset of ab180x.
+
+Required properties:
+
+ - "compatible": should one of:
+        "abracon,abx80x"
+        "abracon,ab0801"
+        "abracon,ab0803"
+        "abracon,ab0804"
+        "abracon,ab0805"
+        "abracon,ab1801"
+        "abracon,ab1803"
+        "abracon,ab1804"
+        "abracon,ab1805"
+	Using "abracon,abx80x" will enable chip autodetection.
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+The abx804 and abx805 have a trickle charger that is able to charge the
+connected battery or supercap. Both the following properties have to be defined
+and valid to enable charging:
+
+ - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
+ - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
+                          resistor, the other values are in ohm.

Documentation/kasan.txt

@@ -9,7 +9,9 @@ a fast and comprehensive solution for finding use-after-free and out-of-bounds
 bugs.
 
 KASan uses compile-time instrumentation for checking every memory access,
-therefore you will need a certain version of GCC > 4.9.2
+therefore you will need a gcc version of 4.9.2 or later. KASan could detect out
+of bounds accesses to stack or global variables, but only if gcc 5.0 or later was
+used to built the kernel.
 
 Currently KASan is supported only for x86_64 architecture and requires that the
 kernel be built with the SLUB allocator.
@@ -23,8 +25,8 @@ To enable KASAN configure kernel with:
 
 and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline
 is compiler instrumentation types. The former produces smaller binary the
-latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or
-latter.
+latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version
+of 5.0 or later.
 
 Currently KASAN works only with the SLUB memory allocator.
 For better bug detection and nicer report, enable CONFIG_STACKTRACE and put

Documentation/powerpc/transactional_memory.txt

@@ -74,23 +74,22 @@ Causes of transaction aborts
 Syscalls
 ========
 
-Syscalls made from within an active transaction will not be performed and the
-transaction will be doomed by the kernel with the failure code TM_CAUSE_SYSCALL
-| TM_CAUSE_PERSISTENT.
+Performing syscalls from within transaction is not recommended, and can lead
+to unpredictable results.
 
-Syscalls made from within a suspended transaction are performed as normal and
-the transaction is not explicitly doomed by the kernel.  However, what the
-kernel does to perform the syscall may result in the transaction being doomed
-by the hardware.  The syscall is performed in suspended mode so any side
-effects will be persistent, independent of transaction success or failure.  No
-guarantees are provided by the kernel about which syscalls will affect
-transaction success.
+Syscalls do not by design abort transactions, but beware: The kernel code will
+not be running in transactional state.  The effect of syscalls will always
+remain visible, but depending on the call they may abort your transaction as a
+side-effect, read soon-to-be-aborted transactional data that should not remain
+invisible, etc.  If you constantly retry a transaction that constantly aborts
+itself by calling a syscall, you'll have a livelock & make no progress.
 
-Care must be taken when relying on syscalls to abort during active transactions
-if the calls are made via a library.  Libraries may cache values (which may
-give the appearance of success) or perform operations that cause transaction
-failure before entering the kernel (which may produce different failure codes).
-Examples are glibc's getpid() and lazy symbol resolution.
+Simple syscalls (e.g. sigprocmask()) "could" be OK.  Even things like write()
+from, say, printf() should be OK as long as the kernel does not access any
+memory that was accessed transactionally.
+
+Consider any syscalls that happen to work as debug-only -- not recommended for
+production use.  Best to queue them up till after the transaction is over.
 
 
 Signals
@@ -177,7 +176,8 @@ kernel aborted a transaction:
  TM_CAUSE_RESCHED       Thread was rescheduled.
  TM_CAUSE_TLBI          Software TLB invalid.
  TM_CAUSE_FAC_UNAV      FP/VEC/VSX unavailable trap.
- TM_CAUSE_SYSCALL       Syscall from active transaction.
+ TM_CAUSE_SYSCALL       Currently unused; future syscalls that must abort
+                        transactions for consistency will use this.
  TM_CAUSE_SIGNAL        Signal delivered.
  TM_CAUSE_MISC          Currently unused.
  TM_CAUSE_ALIGNMENT     Alignment fault.

MAINTAINERS

@@ -892,11 +892,10 @@ S:	Maintained
 F:	arch/arm/mach-alpine/
 
 ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
-M:	Andrew Victor <linux@maxim.org.za>
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
 M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://maxim.org.za/at91_26.html
 W:	http://www.linux4sam.org
 S:	Supported
 F:	arch/arm/mach-at91/
@@ -990,6 +989,12 @@ F:	drivers/clocksource/timer-prima2.c
 F:	drivers/clocksource/timer-atlas7.c
 N:	[^a-z]sirf
 
+ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
+M:	Baruch Siach <baruch@tkos.co.il>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+N:	digicolor
+
 ARM/EBSA110 MACHINE SUPPORT
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1439,9 +1444,10 @@ ARM/SOCFPGA ARCHITECTURE
 M:	Dinh Nguyen <dinguyen@opensource.altera.com>
 S:	Maintained
 F:	arch/arm/mach-socfpga/
+F:	arch/arm/boot/dts/socfpga*
+F:	arch/arm/configs/socfpga_defconfig
 W:	http://www.rocketboards.org
-T:	git://git.rocketboards.org/linux-socfpga.git
-T:	git://git.rocketboards.org/linux-socfpga-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
 ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
 M:	Dinh Nguyen <dinguyen@opensource.altera.com>
@@ -2116,8 +2122,9 @@ S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
-M:	Christian Daudt <bcm@fixthebug.org>
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Ray Jui <rjui@broadcom.com>
+M:	Scott Branden <sbranden@broadcom.com>
 L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://github.com/broadcom/mach-bcm
 S:	Maintained
@@ -2168,7 +2175,6 @@ S:	Maintained
 F:	drivers/usb/gadget/udc/bcm63xx_udc.*
 
 BROADCOM BCM7XXX ARM ARCHITECTURE
-M:	Marc Carino <marc.ceeeee@gmail.com>
 M:	Brian Norris <computersforpeace@gmail.com>
 M:	Gregory Fong <gregory.0xf0@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
@@ -3413,6 +3419,13 @@ F:	drivers/gpu/drm/rcar-du/
 F:	drivers/gpu/drm/shmobile/
 F:	include/linux/platform_data/shmob_drm.h
 
+DRM DRIVERS FOR ROCKCHIP
+M:	Mark Yao <mark.yao@rock-chips.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+F:	drivers/gpu/drm/rockchip/
+F:	Documentation/devicetree/bindings/video/rockchip*
+
 DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -4364,11 +4377,10 @@ F:	fs/gfs2/
 F:	include/uapi/linux/gfs2_ondisk.h
 
 GIGASET ISDN DRIVERS
-M:	Hansjoerg Lipp <hjlipp@web.de>
-M:	Tilman Schmidt <tilman@imap.cc>
+M:	Paul Bolle <pebolle@tiscali.nl>
 L:	gigaset307x-common@lists.sourceforge.net
 W:	http://gigaset307x.sourceforge.net/
-S:	Maintained
+S:	Odd Fixes
 F:	Documentation/isdn/README.gigaset
 F:	drivers/isdn/gigaset/
 F:	include/uapi/linux/gigaset_dev.h
@@ -5035,17 +5047,19 @@ S:	Orphan
 F:	drivers/video/fbdev/imsttfb.c
 
 INFINIBAND SUBSYSTEM
-M:	Roland Dreier <roland@kernel.org>
+M:	Doug Ledford <dledford@redhat.com>
 M:	Sean Hefty <sean.hefty@intel.com>
 M:	Hal Rosenstock <hal.rosenstock@gmail.com>
 L:	linux-rdma@vger.kernel.org
 W:	http://www.openfabrics.org/
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma.git
 S:	Supported
 F:	Documentation/infiniband/
 F:	drivers/infiniband/
 F:	include/uapi/linux/if_infiniband.h
+F:	include/uapi/rdma/
+F:	include/rdma/
 
 INOTIFY
 M:	John McCutchan <john@johnmccutchan.com>
@@ -5798,6 +5812,7 @@ F:	drivers/scsi/53c700*
 LED SUBSYSTEM
 M:	Bryan Wu <cooloney@gmail.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
+M:	Jacek Anaszewski <j.anaszewski@samsung.com>
 L:	linux-leds@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
 S:	Maintained
@@ -6943,6 +6958,17 @@ T:	git git://git.rocketboards.org/linux-socfpga-next.git
 S:	Maintained
 F:	arch/nios2/
 
+NOKIA N900 POWER SUPPLY DRIVERS
+M:	Pali Rohár <pali.rohar@gmail.com>
+S:	Maintained
+F:	include/linux/power/bq2415x_charger.h
+F:	include/linux/power/bq27x00_battery.h
+F:	include/linux/power/isp1704_charger.h
+F:	drivers/power/bq2415x_charger.c
+F:	drivers/power/bq27x00_battery.c
+F:	drivers/power/isp1704_charger.c
+F:	drivers/power/rx51_battery.c
+
 NTB DRIVER
 M:	Jon Mason <jdmason@kudzu.us>
 M:	Dave Jiang <dave.jiang@intel.com>
@@ -8800,10 +8826,11 @@ W:	http://www.emulex.com
 S:	Supported
 F:	drivers/scsi/be2iscsi/
 
-SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-M:	Sathya Perla <sathya.perla@emulex.com>
-M:	Subbu Seetharaman <subbu.seetharaman@emulex.com>
-M:	Ajit Khaparde <ajit.khaparde@emulex.com>
+Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER
+M:	Sathya Perla <sathya.perla@avagotech.com>
+M:	Ajit Khaparde <ajit.khaparde@avagotech.com>
+M:	Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
+M:	Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
 L:	netdev@vger.kernel.org
 W:	http://www.emulex.com
 S:	Supported
@@ -11030,6 +11057,7 @@ F:	drivers/media/pci/zoran/
 ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER
 M:	Minchan Kim <minchan@kernel.org>
 M:	Nitin Gupta <ngupta@vflare.org>
+R:	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/block/zram/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -49,7 +49,7 @@
 		pinctrl-0 = <&matrix_keypad_pins>;
 
 		debounce-delay-ms = <5>;
-		col-scan-delay-us = <1500>;
+		col-scan-delay-us = <5>;
 
 		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
 				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
@@ -473,7 +473,7 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <31 0>;
 
-		wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <272>;

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -18,6 +18,7 @@
 	aliases {
 		rtc0 = &mcp_rtc;
 		rtc1 = &tps659038_rtc;
+		rtc2 = &rtc;
 	};
 
 	memory {
@@ -83,7 +84,7 @@
 	gpio_fan: gpio_fan {
 		/* Based on 5v 500mA AFB02505HHB */
 		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0     0>,
 				     <13000 1>;
 		#cooling-cells = <2>;
@@ -130,8 +131,8 @@
 
 	uart3_pins_default: uart3_pins_default {
 		pinctrl-single,pins = <
-			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
-			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+			0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+			0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
 		>;
 	};
 
@@ -455,7 +456,7 @@
 	mcp_rtc: rtc@6f {
 		compatible = "microchip,mcp7941x";
 		reg = <0x6f>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>;  /* IRQ_SYS_1N */
+		interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;  /* IRQ_SYS_1N */
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&mcp79410_pins_default>;
@@ -478,7 +479,7 @@
 &uart3 {
 	status = "okay";
 	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x248>;
+			      <&dra7_pmx_core 0x3f8>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins_default>;

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -105,6 +105,10 @@
 		};
 
 		internal-regs {
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
 			serial@12000 {
 				status = "okay";
 			};

arch/arm/boot/dts/dra7.dtsi

@@ -911,7 +911,7 @@
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
-			      <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+			      <0x4ae06014 0x4>, <0x4a003b20 0xc>,
 			      <0x4ae0c158 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -944,7 +944,7 @@
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+			      <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
 			      <0x4a002470 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -977,7 +977,7 @@
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+			      <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
 			      <0x4a00246c 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -1010,7 +1010,7 @@
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
-			      <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+			      <0x4ae06010 0x4>, <0x4a003b08 0xc>,
 			      <0x4ae0c154 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -1203,7 +1203,7 @@
 			status = "disabled";
 		};
 
-		rtc@48838000 {
+		rtc: rtc@48838000 {
 			compatible = "ti,am3352-rtc";
 			reg = <0x48838000 0x100>;
 			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,

arch/arm/boot/dts/exynos4412-odroid-common.dtsi

@@ -9,6 +9,7 @@
 
 #include <dt-bindings/sound/samsung-i2s.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/maxim,max77686.h>
 #include "exynos4412.dtsi"
 
 / {
@@ -105,6 +106,8 @@
 
 	rtc@10070000 {
 		status = "okay";
+		clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+		clock-names = "rtc", "rtc_src";
 	};
 
 	g2d@10800000 {

arch/arm/boot/dts/exynos5250-snow.dts

@@ -567,6 +567,7 @@
 	num-slots = <1>;
 	broken-cd;
 	cap-sdio-irq;
+	keep-power-in-suspend;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;

arch/arm/boot/dts/exynos5420-trip-points.dtsi

@@ -28,7 +28,7 @@ trips {
 		type = "active";
 	};
 	cpu-crit-0 {
-		temperature = <1200000>; /* millicelsius */
+		temperature = <120000>; /* millicelsius */
 		hysteresis = <0>; /* millicelsius */
 		type = "critical";
 	};

arch/arm/boot/dts/exynos5420.dtsi

@@ -536,6 +536,7 @@
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
+		power-domains = <&disp_pd>;
 	};
 
 	mipi_phy: video-phy@10040714 {

arch/arm/boot/dts/exynos5440-trip-points.dtsi

@@ -18,7 +18,7 @@ trips {
 		type = "active";
 	};
 	cpu-crit-0 {
-		temperature = <1050000>; /* millicelsius */
+		temperature = <105000>; /* millicelsius */
 		hysteresis = <0>; /* millicelsius */
 		type = "critical";
 	};

arch/arm/boot/dts/imx23-olinuxino.dts

@@ -12,6 +12,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx23.dtsi"
 
 / {
@@ -93,6 +94,7 @@
 
 	ahb@80080000 {
 		usb0: usb@80080000 {
+			dr_mode = "host";
 			vbus-supply = <&reg_usb0_vbus>;
 			status = "okay";
 		};
@@ -122,7 +124,7 @@
 
 		user {
 			label = "green";
-			gpios = <&gpio2 1 1>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };

arch/arm/boot/dts/imx25.dtsi

@@ -428,6 +428,7 @@
 
 			pwm4: pwm@53fc8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
 				reg = <0x53fc8000 0x4000>;
 				clocks = <&clks 108>, <&clks 52>;
 				clock-names = "ipg", "per";

arch/arm/boot/dts/imx28.dtsi

@@ -913,7 +913,7 @@
 					      80 81 68 69
 					      70 71 72 73
 					      74 75 76 77>;
-				interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+				interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 						  "saif0", "saif1", "i2c0", "i2c1",
 						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";

arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

@@ -31,6 +31,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 15 0>;
+			enable-active-high;
 		};
 
 		reg_usb_h1_vbus: regulator@1 {
@@ -40,6 +41,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 0 0>;
+			enable-active-high;
 		};
 	};
 

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -185,7 +185,6 @@
 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	max7310_a: gpio@30 {

arch/arm/boot/dts/omap3-n900.dts

@@ -498,6 +498,8 @@
 		DRVDD-supply = <&vmmc2>;
 		IOVDD-supply = <&vio>;
 		DVDD-supply = <&vio>;
+
+		ai3x-micbias-vg = <1>;
 	};
 
 	tlv320aic3x_aux: tlv320aic3x@19 {
@@ -509,6 +511,8 @@
 		DRVDD-supply = <&vmmc2>;
 		IOVDD-supply = <&vio>;
 		DVDD-supply = <&vio>;
+
+		ai3x-micbias-vg = <2>;
 	};
 
 	tsl2563: tsl2563@29 {

arch/arm/boot/dts/omap3.dtsi

@@ -456,6 +456,7 @@
 		};
 
 		mmu_isp: mmu@480bd400 {
+			#iommu-cells = <0>;
 			compatible = "ti,omap2-iommu";
 			reg = <0x480bd400 0x80>;
 			interrupts = <24>;
@@ -464,6 +465,7 @@
 		};
 
 		mmu_iva: mmu@5d000000 {
+			#iommu-cells = <0>;
 			compatible = "ti,omap2-iommu";
 			reg = <0x5d000000 0x80>;
 			interrupts = <28>;

arch/arm/boot/dts/omap5.dtsi

@@ -128,7 +128,7 @@
 	 * hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
+		compatible = "ti,omap5-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -545,7 +545,7 @@
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -1017,23 +1017,6 @@
 			status = "disabled";
 		};
 
-		vmmci: regulator-gpio {
-			compatible = "regulator-gpio";
-
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2900000>;
-			regulator-name = "mmci-reg";
-			regulator-type = "voltage";
-
-			startup-delay-us = <100>;
-			enable-active-high;
-
-			states = <1800000 0x1
-				  2900000 0x0>;
-
-			status = "disabled";
-		};
-
 		mcde@a0350000 {
 			compatible = "stericsson,mcde";
 			reg = <0xa0350000 0x1000>, /* MCDE */

arch/arm/boot/dts/ste-href.dtsi

@@ -111,6 +111,21 @@
 			pinctrl-1 = <&i2c3_sleep_mode>;
 		};
 
+		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+			enable-active-high;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
+		};
+
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;

arch/arm/boot/dts/ste-snowball.dts

@@ -146,8 +146,21 @@
 		};
 
 		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
 			gpios = <&gpio7 4 0x4>;
 			enable-gpio = <&gpio6 25 0x4>;
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+			enable-active-high;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
 		};
 
 		// External Micro SD slot

arch/arm/configs/multi_v7_defconfig

@@ -39,11 +39,14 @@ CONFIG_ARCH_HIP04=y
 CONFIG_ARCH_KEYSTONE=y
 CONFIG_ARCH_MESON=y
 CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMX50=y
 CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
 CONFIG_SOC_VF610=y
+CONFIG_SOC_LS1021A=y
 CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
 CONFIG_SOC_OMAP5=y

arch/arm/configs/omap2plus_defconfig

@@ -393,7 +393,7 @@ CONFIG_TI_EDMA=y
 CONFIG_DMA_OMAP=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXTCON=m
-CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_USB_GPIO=m
 CONFIG_EXTCON_PALMAS=m
 CONFIG_TI_EMIF=m
 CONFIG_PWM=y

arch/arm/include/asm/dma-iommu.h

@@ -25,7 +25,7 @@ struct dma_iommu_mapping {
 };
 
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size);
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size);
 
 void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping);
 

arch/arm/include/asm/xen/page.h

@@ -110,5 +110,6 @@ static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 bool xen_arch_need_swiotlb(struct device *dev,
 			   unsigned long pfn,
 			   unsigned long mfn);
+unsigned long xen_get_swiotlb_free_pages(unsigned int order);
 
 #endif /* _ASM_ARM_XEN_PAGE_H */

arch/arm/kernel/perf_event_cpu.c

@@ -303,12 +303,17 @@ static int probe_current_pmu(struct arm_pmu *pmu)
 
 static int of_pmu_irq_cfg(struct platform_device *pdev)
 {
-	int i;
+	int i, irq;
 	int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
 
 	if (!irqs)
 		return -ENOMEM;
 
+	/* Don't bother with PPIs; they're already affine */
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0 && irq_is_percpu(irq))
+		return 0;
+
 	for (i = 0; i < pdev->num_resources; ++i) {
 		struct device_node *dn;
 		int cpu;
@@ -317,7 +322,7 @@ static int of_pmu_irq_cfg(struct platform_device *pdev)
 				      i);
 		if (!dn) {
 			pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
-				of_node_full_name(dn), i);
+				of_node_full_name(pdev->dev.of_node), i);
 			break;
 		}
 

arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify it under
  * the terms of the GNU General Public License version 2 as published by the

arch/arm/mach-omap2/prm-regbits-34xx.h

@@ -112,6 +112,7 @@
 #define OMAP3430_VC_CMD_ONLP_SHIFT			16
 #define OMAP3430_VC_CMD_RET_SHIFT			8
 #define OMAP3430_VC_CMD_OFF_SHIFT			0
+#define OMAP3430_SREN_MASK				(1 << 4)
 #define OMAP3430_HSEN_MASK				(1 << 3)
 #define OMAP3430_MCODE_MASK				(0x7 << 0)
 #define OMAP3430_VALID_MASK				(1 << 24)

arch/arm/mach-omap2/prm-regbits-44xx.h

@@ -35,6 +35,7 @@
 #define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				1
 #define OMAP4430_GLOBAL_WUEN_MASK					(1 << 16)
 #define OMAP4430_HSMCODE_MASK						(0x7 << 0)
+#define OMAP4430_SRMODEEN_MASK						(1 << 4)
 #define OMAP4430_HSMODEEN_MASK						(1 << 3)
 #define OMAP4430_HSSCLL_SHIFT						24
 #define OMAP4430_ICEPICK_RST_SHIFT					9

arch/arm/mach-omap2/vc.c

@@ -316,7 +316,8 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
 	 * idle. And we can also scale voltages to zero for off-idle.
 	 * Note that no actual voltage scaling during off-idle will
 	 * happen unless the board specific twl4030 PMIC scripts are
-	 * loaded.
+	 * loaded. See also omap_vc_i2c_init for comments regarding
+	 * erratum i531.
 	 */
 	val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
 	if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
@@ -704,9 +705,16 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
 		return;
 	}
 
+	/*
+	 * Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around
+	 * erratum i531 "Extra Power Consumed When Repeated Start Operation
+	 * Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)".
+	 * Otherwise I2C4 eventually leads into about 23mW extra power being
+	 * consumed even during off idle using VMODE.
+	 */
 	i2c_high_speed = voltdm->pmic->i2c_high_speed;
 	if (i2c_high_speed)
-		voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+		voltdm->rmw(vc->common->i2c_cfg_clear_mask,
 			    vc->common->i2c_cfg_hsen_mask,
 			    vc->common->i2c_cfg_reg);
 

arch/arm/mach-omap2/vc.h

@@ -34,6 +34,7 @@ struct voltagedomain;
  * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
  * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
  * @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
  * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
  * @i2c_mcode_mask: MCODE field mask for I2C config register
  *
@@ -52,6 +53,7 @@ struct omap_vc_common {
 	u8 cmd_ret_shift;
 	u8 cmd_off_shift;
 	u8 i2c_cfg_reg;
+	u8 i2c_cfg_clear_mask;
 	u8 i2c_cfg_hsen_mask;
 	u8 i2c_mcode_mask;
 };

arch/arm/mach-omap2/vc3xxx_data.c

@@ -40,6 +40,7 @@ static struct omap_vc_common omap3_vc_common = {
 	.cmd_onlp_shift	 = OMAP3430_VC_CMD_ONLP_SHIFT,
 	.cmd_ret_shift	 = OMAP3430_VC_CMD_RET_SHIFT,
 	.cmd_off_shift	 = OMAP3430_VC_CMD_OFF_SHIFT,
+	.i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK,
 	.i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
 	.i2c_cfg_reg	 = OMAP3_PRM_VC_I2C_CFG_OFFSET,
 	.i2c_mcode_mask	 = OMAP3430_MCODE_MASK,

arch/arm/mach-omap2/vc44xx_data.c

@@ -42,6 +42,7 @@ static const struct omap_vc_common omap4_vc_common = {
 	.cmd_ret_shift = OMAP4430_RET_SHIFT,
 	.cmd_off_shift = OMAP4430_OFF_SHIFT,
 	.i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+	.i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK,
 	.i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
 	.i2c_mcode_mask	 = OMAP4430_HSMCODE_MASK,
 };

arch/arm/mach-pxa/Kconfig

@@ -691,4 +691,13 @@ config SHARPSL_PM_MAX1111
 config PXA310_ULPI
 	bool
 
+config PXA_SYSTEMS_CPLDS
+	tristate "Motherboard cplds"
+	default ARCH_LUBBOCK || MACH_MAINSTONE
+	help
+	  This driver supports the Lubbock and Mainstone multifunction chip
+	  found on the pxa25x development platform system (Lubbock) and pxa27x
+	  development platform system (Mainstone). This IO board supports the
+	  interrupts handling, ethernet controller, flash chips, etc ...
+
 endif

arch/arm/mach-pxa/Makefile

@@ -90,4 +90,5 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
+obj-$(CONFIG_PXA_SYSTEMS_CPLDS)	+= pxa_cplds_irqs.o
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o

arch/arm/mach-pxa/include/mach/lubbock.h

@@ -37,7 +37,9 @@
 #define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
 
 /* Board specific IRQs */
-#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_NR_IRQS		IRQ_BOARD_START
+
+#define LUBBOCK_IRQ(x)		(LUBBOCK_NR_IRQS + (x))
 #define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
 #define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
 #define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
@@ -47,8 +49,7 @@
 #define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
 #define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
 
-#define LUBBOCK_SA1111_IRQ_BASE	(IRQ_BOARD_START + 16)
-#define LUBBOCK_NR_IRQS		(IRQ_BOARD_START + 16 + 55)
+#define LUBBOCK_SA1111_IRQ_BASE	(LUBBOCK_NR_IRQS + 32)
 
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);

arch/arm/mach-pxa/include/mach/mainstone.h

@@ -120,7 +120,9 @@
 #define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
 
 /* board specific IRQs */
-#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_NR_IRQS	IRQ_BOARD_START
+
+#define MAINSTONE_IRQ(x)	(MAINSTONE_NR_IRQS + (x))
 #define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
 #define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
 #define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
@@ -136,6 +138,4 @@
 #define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
 #define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
 
-#define MAINSTONE_NR_IRQS	(IRQ_BOARD_START + 16)
-
 #endif

arch/arm/mach-pxa/lubbock.c

@@ -12,6 +12,7 @@
  *  published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -123,84 +124,6 @@ void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
 }
 EXPORT_SYMBOL(lubbock_set_misc_wr);
 
-static unsigned long lubbock_irq_enabled;
-
-static void lubbock_mask_irq(struct irq_data *d)
-{
-	int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-	LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
-}
-
-static void lubbock_unmask_irq(struct irq_data *d)
-{
-	int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
-	LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
-}
-
-static struct irq_chip lubbock_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= lubbock_mask_irq,
-	.irq_mask	= lubbock_mask_irq,
-	.irq_unmask	= lubbock_unmask_irq,
-};
-
-static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-	do {
-		/* clear our parent irq */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = LUBBOCK_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-	} while (pending);
-}
-
-static void __init lubbock_init_irq(void)
-{
-	int irq;
-
-	pxa25x_init_irq();
-
-	/* setup extra lubbock irqs */
-	for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
-		irq_set_chip_and_handler(irq, &lubbock_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void lubbock_irq_resume(void)
-{
-	LUB_IRQ_MASK_EN = lubbock_irq_enabled;
-}
-
-static struct syscore_ops lubbock_irq_syscore_ops = {
-	.resume = lubbock_irq_resume,
-};
-
-static int __init lubbock_irq_device_init(void)
-{
-	if (machine_is_lubbock()) {
-		register_syscore_ops(&lubbock_irq_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(lubbock_irq_device_init);
-
-#endif
-
 static int lubbock_udc_is_connected(void)
 {
 	return (LUB_MISC_RD & (1 << 9)) == 0;
@@ -383,11 +306,38 @@ static struct platform_device lubbock_flash_device[2] = {
 	},
 };
 
+static struct resource lubbock_cplds_resources[] = {
+	[0] = {
+		.start	= LUBBOCK_FPGA_PHYS + 0xc0,
+		.end	= LUBBOCK_FPGA_PHYS + 0xe0 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_GPIO_TO_IRQ(0),
+		.end	= PXA_GPIO_TO_IRQ(0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+	[2] = {
+		.start	= LUBBOCK_IRQ(0),
+		.end	= LUBBOCK_IRQ(6),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lubbock_cplds_device = {
+	.name		= "pxa_cplds_irqs",
+	.id		= -1,
+	.resource	= &lubbock_cplds_resources[0],
+	.num_resources	= 3,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
 	&smc91x_device,
 	&lubbock_flash_device[0],
 	&lubbock_flash_device[1],
+	&lubbock_cplds_device,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -648,7 +598,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
 	/* Maintainer: MontaVista Software Inc. */
 	.map_io		= lubbock_map_io,
 	.nr_irqs	= LUBBOCK_NR_IRQS,
-	.init_irq	= lubbock_init_irq,
+	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_time	= pxa_timer_init,
 	.init_machine	= lubbock_init,

arch/arm/mach-pxa/mainstone.c

@@ -13,6 +13,7 @@
  *  published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
@@ -122,92 +123,6 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
 };
 
-static unsigned long mainstone_irq_enabled;
-
-static void mainstone_mask_irq(struct irq_data *d)
-{
-	int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
-	MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq));
-}
-
-static void mainstone_unmask_irq(struct irq_data *d)
-{
-	int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	MST_INTSETCLR &= ~(1 << mainstone_irq);
-	MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
-}
-
-static struct irq_chip mainstone_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= mainstone_mask_irq,
-	.irq_mask	= mainstone_mask_irq,
-	.irq_unmask	= mainstone_unmask_irq,
-};
-
-static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = MAINSTONE_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = MST_INTSETCLR & mainstone_irq_enabled;
-	} while (pending);
-}
-
-static void __init mainstone_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-
-	/* setup extra Mainstone irqs */
-	for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
-		irq_set_chip_and_handler(irq, &mainstone_irq_chip,
-					 handle_level_irq);
-		if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
-		else
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-	set_irq_flags(MAINSTONE_IRQ(8), 0);
-	set_irq_flags(MAINSTONE_IRQ(12), 0);
-
-	MST_INTMSKENA = 0;
-	MST_INTSETCLR = 0;
-
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void mainstone_irq_resume(void)
-{
-	MST_INTMSKENA = mainstone_irq_enabled;
-}
-
-static struct syscore_ops mainstone_irq_syscore_ops = {
-	.resume = mainstone_irq_resume,
-};
-
-static int __init mainstone_irq_device_init(void)
-{
-	if (machine_is_mainstone())
-		register_syscore_ops(&mainstone_irq_syscore_ops);
-
-	return 0;
-}
-
-device_initcall(mainstone_irq_device_init);
-
-#endif
-
-
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= (MST_ETH_PHYS + 0x300),
@@ -487,11 +402,37 @@ static struct platform_device mst_gpio_keys_device = {
 	},
 };
 
+static struct resource mst_cplds_resources[] = {
+	[0] = {
+		.start	= MST_FPGA_PHYS + 0xc0,
+		.end	= MST_FPGA_PHYS + 0xe0 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_GPIO_TO_IRQ(0),
+		.end	= PXA_GPIO_TO_IRQ(0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+	[2] = {
+		.start	= MAINSTONE_IRQ(0),
+		.end	= MAINSTONE_IRQ(15),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mst_cplds_device = {
+	.name		= "pxa_cplds_irqs",
+	.id		= -1,
+	.resource	= &mst_cplds_resources[0],
+	.num_resources	= 3,
+};
+
 static struct platform_device *platform_devices[] __initdata = {
 	&smc91x_device,
 	&mst_flash_device[0],
 	&mst_flash_device[1],
 	&mst_gpio_keys_device,
+	&mst_cplds_device,
 };
 
 static struct pxaohci_platform_data mainstone_ohci_platform_data = {
@@ -718,7 +659,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
 	.map_io		= mainstone_map_io,
 	.nr_irqs	= MAINSTONE_NR_IRQS,
-	.init_irq	= mainstone_init_irq,
+	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_time	= pxa_timer_init,
 	.init_machine	= mainstone_init,

arch/arm/mach-pxa/pxa_cplds_irqs.c

@@ -0,0 +1,200 @@
+/*
+ * Intel Reference Systems cplds
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Cplds motherboard driver, supporting lubbock and mainstone SoC board.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+#define FPGA_IRQ_MASK_EN 0x0
+#define FPGA_IRQ_SET_CLR 0x10
+
+#define CPLDS_NB_IRQ	32
+
+struct cplds {
+	void __iomem *base;
+	int irq;
+	unsigned int irq_mask;
+	struct gpio_desc *gpio0;
+	struct irq_domain *irqdomain;
+};
+
+static irqreturn_t cplds_irq_handler(int in_irq, void *d)
+{
+	struct cplds *fpga = d;
+	unsigned long pending;
+	unsigned int bit;
+
+	pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
+	for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
+		generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
+
+	return IRQ_HANDLED;
+}
+
+static void cplds_irq_mask_ack(struct irq_data *d)
+{
+	struct cplds *fpga = irq_data_get_irq_chip_data(d);
+	unsigned int cplds_irq = irqd_to_hwirq(d);
+	unsigned int set, bit = BIT(cplds_irq);
+
+	fpga->irq_mask &= ~bit;
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
+	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
+}
+
+static void cplds_irq_unmask(struct irq_data *d)
+{
+	struct cplds *fpga = irq_data_get_irq_chip_data(d);
+	unsigned int cplds_irq = irqd_to_hwirq(d);
+	unsigned int bit = BIT(cplds_irq);
+
+	fpga->irq_mask |= bit;
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+}
+
+static struct irq_chip cplds_irq_chip = {
+	.name		= "pxa_cplds",
+	.irq_mask_ack	= cplds_irq_mask_ack,
+	.irq_unmask	= cplds_irq_unmask,
+	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq,
+				   irq_hw_number_t hwirq)
+{
+	struct cplds *fpga = d->host_data;
+
+	irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, fpga);
+
+	return 0;
+}
+
+static const struct irq_domain_ops cplds_irq_domain_ops = {
+	.xlate = irq_domain_xlate_twocell,
+	.map = cplds_irq_domain_map,
+};
+
+static int cplds_resume(struct platform_device *pdev)
+{
+	struct cplds *fpga = platform_get_drvdata(pdev);
+
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+
+	return 0;
+}
+
+static int cplds_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct cplds *fpga;
+	int ret;
+	unsigned int base_irq = 0;
+	unsigned long irqflags = 0;
+
+	fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);
+	if (!fpga)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res) {
+		fpga->irq = (unsigned int)res->start;
+		irqflags = res->flags;
+	}
+	if (!fpga->irq)
+		return -ENODEV;
+
+	base_irq = platform_get_irq(pdev, 1);
+	if (base_irq < 0)
+		base_irq = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	fpga->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(fpga->base))
+		return PTR_ERR(fpga->base);
+
+	platform_set_drvdata(pdev, fpga);
+
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+	writel(0, fpga->base + FPGA_IRQ_SET_CLR);
+
+	ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
+			       irqflags, dev_name(&pdev->dev), fpga);
+	if (ret == -ENOSYS)
+		return -EPROBE_DEFER;
+
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't request main irq%d: %d\n",
+			fpga->irq, ret);
+		return ret;
+	}
+
+	irq_set_irq_wake(fpga->irq, 1);
+	fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node,
+					       CPLDS_NB_IRQ,
+					       &cplds_irq_domain_ops, fpga);
+	if (!fpga->irqdomain)
+		return -ENODEV;
+
+	if (base_irq) {
+		ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0,
+						 CPLDS_NB_IRQ);
+		if (ret) {
+			dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n",
+				base_irq, base_irq + CPLDS_NB_IRQ);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int cplds_remove(struct platform_device *pdev)
+{
+	struct cplds *fpga = platform_get_drvdata(pdev);
+
+	irq_set_chip_and_handler(fpga->irq, NULL, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id cplds_id_table[] = {
+	{ .compatible = "intel,lubbock-cplds-irqs", },
+	{ .compatible = "intel,mainstone-cplds-irqs", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, cplds_id_table);
+
+static struct platform_driver cplds_driver = {
+	.driver		= {
+		.name	= "pxa_cplds_irqs",
+		.of_match_table = of_match_ptr(cplds_id_table),
+	},
+	.probe		= cplds_probe,
+	.remove		= cplds_remove,
+	.resume		= cplds_resume,
+};
+
+module_platform_driver(cplds_driver);
+
+MODULE_DESCRIPTION("PXA Cplds interrupts driver");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_LICENSE("GPL");

arch/arm/mach-rockchip/pm.c

@@ -44,9 +44,11 @@ static void __iomem *rk3288_bootram_base;
 static phys_addr_t rk3288_bootram_phy;
 
 static struct regmap *pmu_regmap;
+static struct regmap *grf_regmap;
 static struct regmap *sgrf_regmap;
 
 static u32 rk3288_pmu_pwr_mode_con;
+static u32 rk3288_grf_soc_con0;
 static u32 rk3288_sgrf_soc_con0;
 
 static inline u32 rk3288_l2_config(void)
@@ -70,11 +72,25 @@ static void rk3288_slp_mode_set(int level)
 {
 	u32 mode_set, mode_set1;
 
+	regmap_read(grf_regmap, RK3288_GRF_SOC_CON0, &rk3288_grf_soc_con0);
+
 	regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
 
 	regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
 		    &rk3288_pmu_pwr_mode_con);
 
+	/*
+	 * We need set this bit GRF_FORCE_JTAG here, for the debug module,
+	 * otherwise, it may become inaccessible after resume.
+	 * This creates a potential security issue, as the sdmmc pins may
+	 * accept jtag data for a short time during resume if no card is
+	 * inserted.
+	 * But this is of course also true for the regular boot, before we
+	 * turn of the jtag/sdmmc autodetect.
+	 */
+	regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, GRF_FORCE_JTAG |
+		     GRF_FORCE_JTAG_WRITE);
+
 	/*
 	 * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR
 	 * PCLK_WDT_GATE - disable WDT during suspend.
@@ -83,6 +99,13 @@ static void rk3288_slp_mode_set(int level)
 		     SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN
 		     | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE);
 
+	/*
+	 * The dapswjdp can not auto reset before resume, that cause it may
+	 * access some illegal address during resume. Let's disable it before
+	 * suspend, and the MASKROM will enable it back.
+	 */
+	regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE);
+
 	/* booting address of resuming system is from this register value */
 	regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
 		     rk3288_bootram_phy);
@@ -128,6 +151,9 @@ static void rk3288_slp_mode_set_resume(void)
 	regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
 		     rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE
 		     | SGRF_FAST_BOOT_EN_WRITE);
+
+	regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, rk3288_grf_soc_con0 |
+		     GRF_FORCE_JTAG_WRITE);
 }
 
 static int rockchip_lpmode_enter(unsigned long arg)
@@ -186,6 +212,13 @@ static int rk3288_suspend_init(struct device_node *np)
 		return PTR_ERR(pmu_regmap);
 	}
 
+	grf_regmap = syscon_regmap_lookup_by_compatible(
+				"rockchip,rk3288-grf");
+	if (IS_ERR(grf_regmap)) {
+		pr_err("%s: could not find grf regmap\n", __func__);
+		return PTR_ERR(pmu_regmap);
+	}
+
 	sram_np = of_find_compatible_node(NULL, NULL,
 					  "rockchip,rk3288-pmu-sram");
 	if (!sram_np) {

arch/arm/mach-rockchip/pm.h

@@ -48,6 +48,10 @@ static inline void rockchip_suspend_init(void)
 #define RK3288_PMU_WAKEUP_RST_CLR_CNT	0x44
 #define RK3288_PMU_PWRMODE_CON1		0x90
 
+#define RK3288_GRF_SOC_CON0		0x244
+#define GRF_FORCE_JTAG			BIT(12)
+#define GRF_FORCE_JTAG_WRITE		BIT(28)
+
 #define RK3288_SGRF_SOC_CON0		(0x0000)
 #define RK3288_SGRF_FAST_BOOT_ADDR	(0x0120)
 #define SGRF_PCLK_WDT_GATE		BIT(6)
@@ -55,6 +59,10 @@ static inline void rockchip_suspend_init(void)
 #define SGRF_FAST_BOOT_EN		BIT(8)
 #define SGRF_FAST_BOOT_EN_WRITE		BIT(24)
 
+#define RK3288_SGRF_CPU_CON0		(0x40)
+#define SGRF_DAPDEVICEEN		BIT(0)
+#define SGRF_DAPDEVICEEN_WRITE		BIT(16)
+
 #define RK3288_CRU_MODE_CON		0x50
 #define RK3288_CRU_SEL0_CON		0x60
 #define RK3288_CRU_SEL1_CON		0x64

arch/arm/mach-rockchip/rockchip.c

@@ -30,11 +30,30 @@
 #include "pm.h"
 
 #define RK3288_GRF_SOC_CON0 0x244
+#define RK3288_TIMER6_7_PHYS 0xff810000
 
 static void __init rockchip_timer_init(void)
 {
 	if (of_machine_is_compatible("rockchip,rk3288")) {
 		struct regmap *grf;
+		void __iomem *reg_base;
+
+		/*
+		 * Most/all uboot versions for rk3288 don't enable timer7
+		 * which is needed for the architected timer to work.
+		 * So make sure it is running during early boot.
+		 */
+		reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K);
+		if (reg_base) {
+			writel(0, reg_base + 0x30);
+			writel(0xffffffff, reg_base + 0x20);
+			writel(0xffffffff, reg_base + 0x24);
+			writel(1, reg_base + 0x30);
+			dsb();
+			iounmap(reg_base);
+		} else {
+			pr_err("rockchip: could not map timer7 registers\n");
+		}
 
 		/*
 		 * Disable auto jtag/sdmmc switching that causes issues

arch/arm/mm/dma-mapping.c

@@ -1878,7 +1878,7 @@ struct dma_map_ops iommu_coherent_ops = {
  * arm_iommu_attach_device function.
  */
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size)
 {
 	unsigned int bits = size >> PAGE_SHIFT;
 	unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long);
@@ -1886,6 +1886,10 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
 	int extensions = 1;
 	int err = -ENOMEM;
 
+	/* currently only 32-bit DMA address space is supported */
+	if (size > DMA_BIT_MASK(32) + 1)
+		return ERR_PTR(-ERANGE);
+
 	if (!bitmap_size)
 		return ERR_PTR(-EINVAL);
 
@@ -2057,13 +2061,6 @@ static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	if (!iommu)
 		return false;
 
-	/*
-	 * currently arm_iommu_create_mapping() takes a max of size_t
-	 * for size param. So check this limit for now.
-	 */
-	if (size > SIZE_MAX)
-		return false;
-
 	mapping = arm_iommu_create_mapping(dev->bus, dma_base, size);
 	if (IS_ERR(mapping)) {
 		pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n",

arch/arm/mm/proc-arm1020.S

@@ -22,8 +22,6 @@
  *
  * These are the low level assembler for performing cache and TLB
  * functions on the arm1020.
- *
- *  CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
  */
 #include <linux/linkage.h>
 #include <linux/init.h>

arch/arm/mm/proc-arm1020e.S

@@ -22,8 +22,6 @@
  *
  * These are the low level assembler for performing cache and TLB
  * functions on the arm1020e.
- *
- *  CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
  */
 #include <linux/linkage.h>
 #include <linux/init.h>

arch/arm/mm/proc-arm925.S

@@ -441,9 +441,6 @@ ENTRY(cpu_arm925_set_pte_ext)
 	.type	__arm925_setup, #function
 __arm925_setup:
 	mov	r0, #0
-#if defined(CONFIG_CPU_ICACHE_STREAMING_DISABLE)
-        orr     r0,r0,#1 << 7
-#endif
 
 	/* Transparent on, D-cache clean & flush mode. See  NOTE2 above */
         orr     r0,r0,#1 << 1			@ transparent mode on

arch/arm/mm/proc-feroceon.S

@@ -602,7 +602,6 @@ __\name\()_proc_info:
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
 	initfn	__feroceon_setup, __\name\()_proc_info
-	.long __feroceon_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP

arch/arm/net/bpf_jit_32.c

@@ -54,6 +54,7 @@
 #define SEEN_DATA		(1 << (BPF_MEMWORDS + 3))
 
 #define FLAG_NEED_X_RESET	(1 << 0)
+#define FLAG_IMM_OVERFLOW	(1 << 1)
 
 struct jit_ctx {
 	const struct bpf_prog *skf;
@@ -293,6 +294,15 @@ static u16 imm_offset(u32 k, struct jit_ctx *ctx)
 	/* PC in ARM mode == address of the instruction + 8 */
 	imm = offset - (8 + ctx->idx * 4);
 
+	if (imm & ~0xfff) {
+		/*
+		 * literal pool is too far, signal it into flags. we
+		 * can only detect it on the second pass unfortunately.
+		 */
+		ctx->flags |= FLAG_IMM_OVERFLOW;
+		return 0;
+	}
+
 	return imm;
 }
 
@@ -449,10 +459,21 @@ static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx)
 		return;
 	}
 #endif
-	if (rm != ARM_R0)
-		emit(ARM_MOV_R(ARM_R0, rm), ctx);
+
+	/*
+	 * For BPF_ALU | BPF_DIV | BPF_K instructions, rm is ARM_R4
+	 * (r_A) and rn is ARM_R0 (r_scratch) so load rn first into
+	 * ARM_R1 to avoid accidentally overwriting ARM_R0 with rm
+	 * before using it as a source for ARM_R1.
+	 *
+	 * For BPF_ALU | BPF_DIV | BPF_X rm is ARM_R4 (r_A) and rn is
+	 * ARM_R5 (r_X) so there is no particular register overlap
+	 * issues.
+	 */
 	if (rn != ARM_R1)
 		emit(ARM_MOV_R(ARM_R1, rn), ctx);
+	if (rm != ARM_R0)
+		emit(ARM_MOV_R(ARM_R0, rm), ctx);
 
 	ctx->seen |= SEEN_CALL;
 	emit_mov_i(ARM_R3, (u32)jit_udiv, ctx);
@@ -865,6 +886,14 @@ b_epilogue:
 		default:
 			return -1;
 		}
+
+		if (ctx->flags & FLAG_IMM_OVERFLOW)
+			/*
+			 * this instruction generated an overflow when
+			 * trying to access the literal pool, so
+			 * delegate this filter to the kernel interpreter.
+			 */
+			return -1;
 	}
 
 	/* compute offsets only during the first pass */
@@ -927,7 +956,14 @@ void bpf_jit_compile(struct bpf_prog *fp)
 	ctx.idx = 0;
 
 	build_prologue(&ctx);
-	build_body(&ctx);
+	if (build_body(&ctx) < 0) {
+#if __LINUX_ARM_ARCH__ < 7
+		if (ctx.imm_count)
+			kfree(ctx.imms);
+#endif
+		bpf_jit_binary_free(header);
+		goto out;
+	}
 	build_epilogue(&ctx);
 
 	flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx));

arch/arm/xen/mm.c

@@ -4,6 +4,7 @@
 #include <linux/gfp.h>
 #include <linux/highmem.h>
 #include <linux/export.h>
+#include <linux/memblock.h>
 #include <linux/of_address.h>
 #include <linux/slab.h>
 #include <linux/types.h>
@@ -21,6 +22,20 @@
 #include <asm/xen/hypercall.h>
 #include <asm/xen/interface.h>
 
+unsigned long xen_get_swiotlb_free_pages(unsigned int order)
+{
+	struct memblock_region *reg;
+	gfp_t flags = __GFP_NOWARN;
+
+	for_each_memblock(memory, reg) {
+		if (reg->base < (phys_addr_t)0xffffffff) {
+			flags |= __GFP_DMA;
+			break;
+		}
+	}
+	return __get_free_pages(flags, order);
+}
+
 enum dma_cache_op {
        DMA_UNMAP,
        DMA_MAP,

arch/arm64/crypto/crc32-arm64.c

@@ -147,13 +147,21 @@ static int chksum_final(struct shash_desc *desc, u8 *out)
 {
 	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
 
+	put_unaligned_le32(ctx->crc, out);
+	return 0;
+}
+
+static int chksumc_final(struct shash_desc *desc, u8 *out)
+{
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
 	put_unaligned_le32(~ctx->crc, out);
 	return 0;
 }
 
 static int __chksum_finup(u32 crc, const u8 *data, unsigned int len, u8 *out)
 {
-	put_unaligned_le32(~crc32_arm64_le_hw(crc, data, len), out);
+	put_unaligned_le32(crc32_arm64_le_hw(crc, data, len), out);
 	return 0;
 }
 
@@ -199,6 +207,14 @@ static int crc32_cra_init(struct crypto_tfm *tfm)
 {
 	struct chksum_ctx *mctx = crypto_tfm_ctx(tfm);
 
+	mctx->key = 0;
+	return 0;
+}
+
+static int crc32c_cra_init(struct crypto_tfm *tfm)
+{
+	struct chksum_ctx *mctx = crypto_tfm_ctx(tfm);
+
 	mctx->key = ~0;
 	return 0;
 }
@@ -229,7 +245,7 @@ static struct shash_alg crc32c_alg = {
 	.setkey			=	chksum_setkey,
 	.init			=	chksum_init,
 	.update			=	chksumc_update,
-	.final			=	chksum_final,
+	.final			=	chksumc_final,
 	.finup			=	chksumc_finup,
 	.digest			=	chksumc_digest,
 	.descsize		=	sizeof(struct chksum_desc_ctx),
@@ -241,7 +257,7 @@ static struct shash_alg crc32c_alg = {
 		.cra_alignmask		=	0,
 		.cra_ctxsize		=	sizeof(struct chksum_ctx),
 		.cra_module		=	THIS_MODULE,
-		.cra_init		=	crc32_cra_init,
+		.cra_init		=	crc32c_cra_init,
 	}
 };
 

arch/arm64/crypto/sha1-ce-glue.c

@@ -74,6 +74,9 @@ static int sha1_ce_finup(struct shash_desc *desc, const u8 *data,
 
 static int sha1_ce_final(struct shash_desc *desc, u8 *out)
 {
+	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
+
+	sctx->finalize = 0;
 	kernel_neon_begin_partial(16);
 	sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_ce_transform);
 	kernel_neon_end();

arch/arm64/crypto/sha2-ce-glue.c

@@ -75,6 +75,9 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data,
 
 static int sha256_ce_final(struct shash_desc *desc, u8 *out)
 {
+	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
+
+	sctx->finalize = 0;
 	kernel_neon_begin_partial(28);
 	sha256_base_do_finalize(desc, (sha256_block_fn *)sha2_ce_transform);
 	kernel_neon_end();

arch/m32r/kernel/smp.c

@@ -45,7 +45,7 @@ static volatile unsigned long flushcache_cpumask = 0;
 /*
  * For flush_tlb_others()
  */
-static volatile cpumask_t flush_cpumask;
+static cpumask_t flush_cpumask;
 static struct mm_struct *flush_mm;
 static struct vm_area_struct *flush_vma;
 static volatile unsigned long flush_va;
@@ -415,7 +415,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
 	 */
 	send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0);
 
-	while (!cpumask_empty((cpumask_t*)&flush_cpumask)) {
+	while (!cpumask_empty(&flush_cpumask)) {
 		/* nothing. lockup detection does not belong here */
 		mb();
 	}
@@ -468,7 +468,7 @@ void smp_invalidate_interrupt(void)
 			__flush_tlb_page(va);
 		}
 	}
-	cpumask_clear_cpu(cpu_id, (cpumask_t*)&flush_cpumask);
+	cpumask_clear_cpu(cpu_id, &flush_cpumask);
 }
 
 /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/

arch/mips/include/asm/smp.h

@@ -45,7 +45,7 @@ extern int __cpu_logical_map[NR_CPUS];
 #define SMP_DUMP		0x8
 #define SMP_ASK_C0COUNT		0x10
 
-extern volatile cpumask_t cpu_callin_map;
+extern cpumask_t cpu_callin_map;
 
 /* Mask of CPUs which are currently definitely operating coherently */
 extern cpumask_t cpu_coherent_mask;

arch/mips/kernel/elf.c

@@ -76,14 +76,6 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
 
 	/* Lets see if this is an O32 ELF */
 	if (ehdr32->e_ident[EI_CLASS] == ELFCLASS32) {
-		/* FR = 1 for N32 */
-		if (ehdr32->e_flags & EF_MIPS_ABI2)
-			state->overall_fp_mode = FP_FR1;
-		else
-			/* Set a good default FPU mode for O32 */
-			state->overall_fp_mode = cpu_has_mips_r6 ?
-				FP_FRE : FP_FR0;
-
 		if (ehdr32->e_flags & EF_MIPS_FP64) {
 			/*
 			 * Set MIPS_ABI_FP_OLD_64 for EF_MIPS_FP64. We will override it
@@ -104,9 +96,6 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
 				  (char *)&abiflags,
 				  sizeof(abiflags));
 	} else {
-		/* FR=1 is really the only option for 64-bit */
-		state->overall_fp_mode = FP_FR1;
-
 		if (phdr64->p_type != PT_MIPS_ABIFLAGS)
 			return 0;
 		if (phdr64->p_filesz < sizeof(abiflags))
@@ -137,6 +126,7 @@ int arch_check_elf(void *_ehdr, bool has_interpreter,
 	struct elf32_hdr *ehdr = _ehdr;
 	struct mode_req prog_req, interp_req;
 	int fp_abi, interp_fp_abi, abi0, abi1, max_abi;
+	bool is_mips64;
 
 	if (!config_enabled(CONFIG_MIPS_O32_FP64_SUPPORT))
 		return 0;
@@ -152,10 +142,22 @@ int arch_check_elf(void *_ehdr, bool has_interpreter,
 		abi0 = abi1 = fp_abi;
 	}
 
-	/* ABI limits. O32 = FP_64A, N32/N64 = FP_SOFT */
-	max_abi = ((ehdr->e_ident[EI_CLASS] == ELFCLASS32) &&
-		   (!(ehdr->e_flags & EF_MIPS_ABI2))) ?
-		MIPS_ABI_FP_64A : MIPS_ABI_FP_SOFT;
+	is_mips64 = (ehdr->e_ident[EI_CLASS] == ELFCLASS64) ||
+		    (ehdr->e_flags & EF_MIPS_ABI2);
+
+	if (is_mips64) {
+		/* MIPS64 code always uses FR=1, thus the default is easy */
+		state->overall_fp_mode = FP_FR1;
+
+		/* Disallow access to the various FPXX & FP64 ABIs */
+		max_abi = MIPS_ABI_FP_SOFT;
+	} else {
+		/* Default to a mode capable of running code expecting FR=0 */
+		state->overall_fp_mode = cpu_has_mips_r6 ? FP_FRE : FP_FR0;
+
+		/* Allow all ABIs we know about */
+		max_abi = MIPS_ABI_FP_64A;
+	}
 
 	if ((abi0 > max_abi && abi0 != MIPS_ABI_FP_UNKNOWN) ||
 	    (abi1 > max_abi && abi1 != MIPS_ABI_FP_UNKNOWN))

arch/mips/kernel/smp.c

@@ -43,7 +43,7 @@
 #include <asm/time.h>
 #include <asm/setup.h>
 
-volatile cpumask_t cpu_callin_map;	/* Bitmask of started secondaries */
+cpumask_t cpu_callin_map;		/* Bitmask of started secondaries */
 
 int __cpu_number_map[NR_CPUS];		/* Map physical to logical */
 EXPORT_SYMBOL(__cpu_number_map);
@@ -218,8 +218,10 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	/*
 	 * Trust is futile.  We should really have timeouts ...
 	 */
-	while (!cpumask_test_cpu(cpu, &cpu_callin_map))
+	while (!cpumask_test_cpu(cpu, &cpu_callin_map)) {
 		udelay(100);
+		schedule();
+	}
 
 	synchronise_count_master(cpu);
 	return 0;

arch/powerpc/include/uapi/asm/tm.h

@@ -11,7 +11,7 @@
 #define TM_CAUSE_RESCHED	0xde
 #define TM_CAUSE_TLBI		0xdc
 #define TM_CAUSE_FAC_UNAV	0xda
-#define TM_CAUSE_SYSCALL	0xd8
+#define TM_CAUSE_SYSCALL	0xd8  /* future use */
 #define TM_CAUSE_MISC		0xd6  /* future use */
 #define TM_CAUSE_SIGNAL		0xd4
 #define TM_CAUSE_ALIGNMENT	0xd2

arch/powerpc/kernel/eeh.c

@@ -749,21 +749,24 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 		eeh_unfreeze_pe(pe, false);
 		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
 		eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev);
+		eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
 		break;
 	case pcie_hot_reset:
+		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
 		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
 		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
 		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_HOT);
 		break;
 	case pcie_warm_reset:
+		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
 		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
 		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
 		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
 		break;
 	default:
-		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
+		eeh_pe_state_clear(pe, EEH_PE_ISOLATED | EEH_PE_CFG_BLOCKED);
 		return -EINVAL;
 	};
 
@@ -1058,6 +1061,9 @@ void eeh_add_device_early(struct pci_dn *pdn)
 	if (!edev || !eeh_enabled())
 		return;
 
+	if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE))
+		return;
+
 	/* USB Bus children of PCI devices will not have BUID's */
 	phb = edev->phb;
 	if (NULL == phb ||
@@ -1112,6 +1118,9 @@ void eeh_add_device_late(struct pci_dev *dev)
 		return;
 	}
 
+	if (eeh_has_flag(EEH_PROBE_MODE_DEV))
+		eeh_ops->probe(pdn, NULL);
+
 	/*
 	 * The EEH cache might not be removed correctly because of
 	 * unbalanced kref to the device during unplug time, which

arch/powerpc/kernel/entry_64.S

@@ -34,7 +34,6 @@
 #include <asm/ftrace.h>
 #include <asm/hw_irq.h>
 #include <asm/context_tracking.h>
-#include <asm/tm.h>
 
 /*
  * System calls.
@@ -146,24 +145,6 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 	andi.	r11,r10,_TIF_SYSCALL_DOTRACE
 	bne	syscall_dotrace
 .Lsyscall_dotrace_cont:
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-BEGIN_FTR_SECTION
-	b	1f
-END_FTR_SECTION_IFCLR(CPU_FTR_TM)
-	extrdi.	r11, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */
-	beq+	1f
-
-	/* Doom the transaction and don't perform the syscall: */
-	mfmsr	r11
-	li	r12, 1
-	rldimi	r11, r12, MSR_TM_LG, 63-MSR_TM_LG
-	mtmsrd	r11, 0
-	li	r11, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT)
-	TABORT(R11)
-
-	b	.Lsyscall_exit
-1:
-#endif
 	cmpldi	0,r0,NR_syscalls
 	bge-	syscall_enosys
 

arch/powerpc/kernel/idle_power7.S

@@ -501,9 +501,11 @@ BEGIN_FTR_SECTION
 	CHECK_HMI_INTERRUPT
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	ld	r1,PACAR1(r13)
+	ld	r6,_CCR(r1)
 	ld	r4,_MSR(r1)
 	ld	r5,_NIP(r1)
 	addi	r1,r1,INT_FRAME_SIZE
+	mtcr	r6
 	mtspr	SPRN_SRR1,r4
 	mtspr	SPRN_SRR0,r5
 	rfid

arch/powerpc/kvm/book3s_xics.c

@@ -12,6 +12,7 @@
 #include <linux/err.h>
 #include <linux/gfp.h>
 #include <linux/anon_inodes.h>
+#include <linux/spinlock.h>
 
 #include <asm/uaccess.h>
 #include <asm/kvm_book3s.h>
@@ -20,7 +21,6 @@
 #include <asm/xics.h>
 #include <asm/debug.h>
 #include <asm/time.h>
-#include <asm/spinlock.h>
 
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -2693,7 +2693,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		hose->last_busno = 0xff;
 	}
 	hose->private_data = phb;
-	hose->controller_ops = pnv_pci_controller_ops;
 	phb->hub_id = hub_id;
 	phb->opal_id = phb_id;
 	phb->type = ioda_type;
@@ -2812,6 +2811,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	pnv_pci_controller_ops.enable_device_hook = pnv_pci_enable_device_hook;
 	pnv_pci_controller_ops.window_alignment = pnv_pci_window_alignment;
 	pnv_pci_controller_ops.reset_secondary_bus = pnv_pci_reset_secondary_bus;
+	hose->controller_ops = pnv_pci_controller_ops;
 
 #ifdef CONFIG_PCI_IOV
 	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;

arch/powerpc/platforms/pseries/dlpar.c

@@ -412,6 +412,10 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 	if (rc)
 		return -EINVAL;
 
+	rc = dlpar_acquire_drc(drc_index);
+	if (rc)
+		return -EINVAL;
+
 	parent = of_find_node_by_path("/cpus");
 	if (!parent)
 		return -ENODEV;
@@ -422,12 +426,6 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 
 	of_node_put(parent);
 
-	rc = dlpar_acquire_drc(drc_index);
-	if (rc) {
-		dlpar_free_cc_nodes(dn);
-		return -EINVAL;
-	}
-
 	rc = dlpar_attach_node(dn);
 	if (rc) {
 		dlpar_release_drc(drc_index);

arch/x86/boot/compressed/eboot.c

@@ -1109,6 +1109,8 @@ struct boot_params *make_boot_params(struct efi_config *c)
 	if (!cmdline_ptr)
 		goto fail;
 	hdr->cmd_line_ptr = (unsigned long)cmdline_ptr;
+	/* Fill in upper bits of command line address, NOP on 32 bit  */
+	boot_params->ext_cmd_line_ptr = (u64)(unsigned long)cmdline_ptr >> 32;
 
 	hdr->ramdisk_image = 0;
 	hdr->ramdisk_size = 0;

arch/x86/include/asm/hypervisor.h

@@ -50,7 +50,7 @@ extern const struct hypervisor_x86 *x86_hyper;
 /* Recognized hypervisors */
 extern const struct hypervisor_x86 x86_hyper_vmware;
 extern const struct hypervisor_x86 x86_hyper_ms_hyperv;
-extern const struct hypervisor_x86 x86_hyper_xen_hvm;
+extern const struct hypervisor_x86 x86_hyper_xen;
 extern const struct hypervisor_x86 x86_hyper_kvm;
 
 extern void init_hypervisor(struct cpuinfo_x86 *c);

arch/x86/include/asm/spinlock.h

@@ -169,7 +169,7 @@ static inline int arch_spin_is_contended(arch_spinlock_t *lock)
 	struct __raw_tickets tmp = READ_ONCE(lock->tickets);
 
 	tmp.head &= ~TICKET_SLOWPATH_FLAG;
-	return (tmp.tail - tmp.head) > TICKET_LOCK_INC;
+	return (__ticket_t)(tmp.tail - tmp.head) > TICKET_LOCK_INC;
 }
 #define arch_spin_is_contended	arch_spin_is_contended
 

arch/x86/include/asm/xen/page.h

@@ -269,4 +269,9 @@ static inline bool xen_arch_need_swiotlb(struct device *dev,
 	return false;
 }
 
+static inline unsigned long xen_get_swiotlb_free_pages(unsigned int order)
+{
+	return __get_free_pages(__GFP_NOWARN, order);
+}
+
 #endif /* _ASM_X86_XEN_PAGE_H */

arch/x86/kernel/cpu/hypervisor.c

@@ -27,8 +27,8 @@
 
 static const __initconst struct hypervisor_x86 * const hypervisors[] =
 {
-#ifdef CONFIG_XEN_PVHVM
-	&x86_hyper_xen_hvm,
+#ifdef CONFIG_XEN
+	&x86_hyper_xen,
 #endif
 	&x86_hyper_vmware,
 	&x86_hyper_ms_hyperv,

arch/x86/kernel/cpu/perf_event_intel.c

@@ -2533,34 +2533,6 @@ ssize_t intel_event_sysfs_show(char *page, u64 config)
 	return x86_event_sysfs_show(page, config, event);
 }
 
-static __initconst const struct x86_pmu core_pmu = {
-	.name			= "core",
-	.handle_irq		= x86_pmu_handle_irq,
-	.disable_all		= x86_pmu_disable_all,
-	.enable_all		= core_pmu_enable_all,
-	.enable			= core_pmu_enable_event,
-	.disable		= x86_pmu_disable_event,
-	.hw_config		= x86_pmu_hw_config,
-	.schedule_events	= x86_schedule_events,
-	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
-	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
-	.event_map		= intel_pmu_event_map,
-	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
-	.apic			= 1,
-	/*
-	 * Intel PMCs cannot be accessed sanely above 32 bit width,
-	 * so we install an artificial 1<<31 period regardless of
-	 * the generic event period:
-	 */
-	.max_period		= (1ULL << 31) - 1,
-	.get_event_constraints	= intel_get_event_constraints,
-	.put_event_constraints	= intel_put_event_constraints,
-	.event_constraints	= intel_core_event_constraints,
-	.guest_get_msrs		= core_guest_get_msrs,
-	.format_attrs		= intel_arch_formats_attr,
-	.events_sysfs_show	= intel_event_sysfs_show,
-};
-
 struct intel_shared_regs *allocate_shared_regs(int cpu)
 {
 	struct intel_shared_regs *regs;
@@ -2743,6 +2715,44 @@ static struct attribute *intel_arch3_formats_attr[] = {
 	NULL,
 };
 
+static __initconst const struct x86_pmu core_pmu = {
+	.name			= "core",
+	.handle_irq		= x86_pmu_handle_irq,
+	.disable_all		= x86_pmu_disable_all,
+	.enable_all		= core_pmu_enable_all,
+	.enable			= core_pmu_enable_event,
+	.disable		= x86_pmu_disable_event,
+	.hw_config		= x86_pmu_hw_config,
+	.schedule_events	= x86_schedule_events,
+	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
+	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
+	.event_map		= intel_pmu_event_map,
+	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
+	.apic			= 1,
+	/*
+	 * Intel PMCs cannot be accessed sanely above 32-bit width,
+	 * so we install an artificial 1<<31 period regardless of
+	 * the generic event period:
+	 */
+	.max_period		= (1ULL<<31) - 1,
+	.get_event_constraints	= intel_get_event_constraints,
+	.put_event_constraints	= intel_put_event_constraints,
+	.event_constraints	= intel_core_event_constraints,
+	.guest_get_msrs		= core_guest_get_msrs,
+	.format_attrs		= intel_arch_formats_attr,
+	.events_sysfs_show	= intel_event_sysfs_show,
+
+	/*
+	 * Virtual (or funny metal) CPU can define x86_pmu.extra_regs
+	 * together with PMU version 1 and thus be using core_pmu with
+	 * shared_regs. We need following callbacks here to allocate
+	 * it properly.
+	 */
+	.cpu_prepare		= intel_pmu_cpu_prepare,
+	.cpu_starting		= intel_pmu_cpu_starting,
+	.cpu_dying		= intel_pmu_cpu_dying,
+};
+
 static __initconst const struct x86_pmu intel_pmu = {
 	.name			= "Intel",
 	.handle_irq		= intel_pmu_handle_irq,

arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c

@@ -1,6 +1,13 @@
 /* Nehalem/SandBridge/Haswell uncore support */
 #include "perf_event_intel_uncore.h"
 
+/* Uncore IMC PCI IDs */
+#define PCI_DEVICE_ID_INTEL_SNB_IMC	0x0100
+#define PCI_DEVICE_ID_INTEL_IVB_IMC	0x0154
+#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC	0x0150
+#define PCI_DEVICE_ID_INTEL_HSW_IMC	0x0c00
+#define PCI_DEVICE_ID_INTEL_HSW_U_IMC	0x0a04
+
 /* SNB event control */
 #define SNB_UNC_CTL_EV_SEL_MASK			0x000000ff
 #define SNB_UNC_CTL_UMASK_MASK			0x0000ff00
@@ -472,6 +479,10 @@ static const struct pci_device_id hsw_uncore_pci_ids[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_IMC),
 		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
 	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_U_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
 	{ /* end: all zeroes */ },
 };
 
@@ -502,6 +513,7 @@ static const struct imc_uncore_pci_dev desktop_imc_pci_ids[] = {
 	IMC_DEV(IVB_IMC, &ivb_uncore_pci_driver),    /* 3rd Gen Core processor */
 	IMC_DEV(IVB_E3_IMC, &ivb_uncore_pci_driver), /* Xeon E3-1200 v2/3rd Gen Core processor */
 	IMC_DEV(HSW_IMC, &hsw_uncore_pci_driver),    /* 4th Gen Core Processor */
+	IMC_DEV(HSW_U_IMC, &hsw_uncore_pci_driver),  /* 4th Gen Core ULT Mobile Processor */
 	{  /* end marker */ }
 };
 

arch/x86/kernel/process.c

@@ -57,7 +57,7 @@ __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, cpu_tss) = {
 	.io_bitmap		= { [0 ... IO_BITMAP_LONGS] = ~0 },
 #endif
 };
-EXPORT_PER_CPU_SYMBOL_GPL(cpu_tss);
+EXPORT_PER_CPU_SYMBOL(cpu_tss);
 
 #ifdef CONFIG_X86_64
 static DEFINE_PER_CPU(unsigned char, is_idle);
@@ -156,11 +156,13 @@ void flush_thread(void)
 		/* FPU state will be reallocated lazily at the first use. */
 		drop_fpu(tsk);
 		free_thread_xstate(tsk);
-	} else if (!used_math()) {
-		/* kthread execs. TODO: cleanup this horror. */
-		if (WARN_ON(init_fpu(tsk)))
-			force_sig(SIGKILL, tsk);
-		user_fpu_begin();
+	} else {
+		if (!tsk_used_math(tsk)) {
+			/* kthread execs. TODO: cleanup this horror. */
+			if (WARN_ON(init_fpu(tsk)))
+				force_sig(SIGKILL, tsk);
+			user_fpu_begin();
+		}
 		restore_init_xstate();
 	}
 }

arch/x86/mm/ioremap.c

@@ -351,18 +351,20 @@ int arch_ioremap_pmd_supported(void)
  */
 void *xlate_dev_mem_ptr(phys_addr_t phys)
 {
-	void *addr;
-	unsigned long start = phys & PAGE_MASK;
+	unsigned long start  = phys &  PAGE_MASK;
+	unsigned long offset = phys & ~PAGE_MASK;
+	unsigned long vaddr;
 
 	/* If page is RAM, we can use __va. Otherwise ioremap and unmap. */
 	if (page_is_ram(start >> PAGE_SHIFT))
 		return __va(phys);
 
-	addr = (void __force *)ioremap_cache(start, PAGE_SIZE);
-	if (addr)
-		addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK));
+	vaddr = (unsigned long)ioremap_cache(start, PAGE_SIZE);
+	/* Only add the offset on success and return NULL if the ioremap() failed: */
+	if (vaddr)
+		vaddr += offset;
 
-	return addr;
+	return (void *)vaddr;
 }
 
 void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)

arch/x86/net/bpf_jit_comp.c

@@ -559,6 +559,13 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 				if (is_ereg(dst_reg))
 					EMIT1(0x41);
 				EMIT3(0xC1, add_1reg(0xC8, dst_reg), 8);
+
+				/* emit 'movzwl eax, ax' */
+				if (is_ereg(dst_reg))
+					EMIT3(0x45, 0x0F, 0xB7);
+				else
+					EMIT2(0x0F, 0xB7);
+				EMIT1(add_2reg(0xC0, dst_reg, dst_reg));
 				break;
 			case 32:
 				/* emit 'bswap eax' to swap lower 4 bytes */
@@ -577,6 +584,27 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 			break;
 
 		case BPF_ALU | BPF_END | BPF_FROM_LE:
+			switch (imm32) {
+			case 16:
+				/* emit 'movzwl eax, ax' to zero extend 16-bit
+				 * into 64 bit
+				 */
+				if (is_ereg(dst_reg))
+					EMIT3(0x45, 0x0F, 0xB7);
+				else
+					EMIT2(0x0F, 0xB7);
+				EMIT1(add_2reg(0xC0, dst_reg, dst_reg));
+				break;
+			case 32:
+				/* emit 'mov eax, eax' to clear upper 32-bits */
+				if (is_ereg(dst_reg))
+					EMIT1(0x45);
+				EMIT2(0x89, add_2reg(0xC0, dst_reg, dst_reg));
+				break;
+			case 64:
+				/* nop */
+				break;
+			}
 			break;
 
 			/* ST: *(u8*)(dst_reg + off) = imm */

arch/x86/pci/acpi.c

@@ -325,6 +325,26 @@ static void release_pci_root_info(struct pci_host_bridge *bridge)
 	kfree(info);
 }
 
+/*
+ * An IO port or MMIO resource assigned to a PCI host bridge may be
+ * consumed by the host bridge itself or available to its child
+ * bus/devices. The ACPI specification defines a bit (Producer/Consumer)
+ * to tell whether the resource is consumed by the host bridge itself,
+ * but firmware hasn't used that bit consistently, so we can't rely on it.
+ *
+ * On x86 and IA64 platforms, all IO port and MMIO resources are assumed
+ * to be available to child bus/devices except one special case:
+ *     IO port [0xCF8-0xCFF] is consumed by the host bridge itself
+ *     to access PCI configuration space.
+ *
+ * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
+ */
+static bool resource_is_pcicfg_ioport(struct resource *res)
+{
+	return (res->flags & IORESOURCE_IO) &&
+		res->start == 0xCF8 && res->end == 0xCFF;
+}
+
 static void probe_pci_root_info(struct pci_root_info *info,
 				struct acpi_device *device,
 				int busnum, int domain,
@@ -346,8 +366,8 @@ static void probe_pci_root_info(struct pci_root_info *info,
 			"no IO and memory resources present in _CRS\n");
 	else
 		resource_list_for_each_entry_safe(entry, tmp, list) {
-			if ((entry->res->flags & IORESOURCE_WINDOW) == 0 ||
-			    (entry->res->flags & IORESOURCE_DISABLED))
+			if ((entry->res->flags & IORESOURCE_DISABLED) ||
+			    resource_is_pcicfg_ioport(entry->res))
 				resource_list_destroy_entry(entry);
 			else
 				entry->res->name = info->name;

arch/x86/xen/enlighten.c

@@ -1760,6 +1760,9 @@ static struct notifier_block xen_hvm_cpu_notifier = {
 
 static void __init xen_hvm_guest_init(void)
 {
+	if (xen_pv_domain())
+		return;
+
 	init_hvm_pv_info();
 
 	xen_hvm_init_shared_info();
@@ -1775,6 +1778,7 @@ static void __init xen_hvm_guest_init(void)
 	xen_hvm_init_time_ops();
 	xen_hvm_init_mmu_ops();
 }
+#endif
 
 static bool xen_nopv = false;
 static __init int xen_parse_nopv(char *arg)
@@ -1784,14 +1788,11 @@ static __init int xen_parse_nopv(char *arg)
 }
 early_param("xen_nopv", xen_parse_nopv);
 
-static uint32_t __init xen_hvm_platform(void)
+static uint32_t __init xen_platform(void)
 {
 	if (xen_nopv)
 		return 0;
 
-	if (xen_pv_domain())
-		return 0;
-
 	return xen_cpuid_base();
 }
 
@@ -1809,11 +1810,19 @@ bool xen_hvm_need_lapic(void)
 }
 EXPORT_SYMBOL_GPL(xen_hvm_need_lapic);
 
-const struct hypervisor_x86 x86_hyper_xen_hvm __refconst = {
-	.name			= "Xen HVM",
-	.detect			= xen_hvm_platform,
+static void xen_set_cpu_features(struct cpuinfo_x86 *c)
+{
+	if (xen_pv_domain())
+		clear_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
+}
+
+const struct hypervisor_x86 x86_hyper_xen = {
+	.name			= "Xen",
+	.detect			= xen_platform,
+#ifdef CONFIG_XEN_PVHVM
 	.init_platform		= xen_hvm_guest_init,
+#endif
 	.x2apic_available	= xen_x2apic_para_available,
+	.set_cpu_features       = xen_set_cpu_features,
 };
-EXPORT_SYMBOL(x86_hyper_xen_hvm);
-#endif
+EXPORT_SYMBOL(x86_hyper_xen);

arch/x86/xen/suspend.c

@@ -88,7 +88,17 @@ static void xen_vcpu_notify_restore(void *data)
 	tick_resume_local();
 }
 
+static void xen_vcpu_notify_suspend(void *data)
+{
+	tick_suspend_local();
+}
+
 void xen_arch_resume(void)
 {
 	on_each_cpu(xen_vcpu_notify_restore, NULL, 1);
 }
+
+void xen_arch_suspend(void)
+{
+	on_each_cpu(xen_vcpu_notify_suspend, NULL, 1);
+}

block/blk-core.c

@@ -552,6 +552,8 @@ void blk_cleanup_queue(struct request_queue *q)
 		q->queue_lock = &q->__queue_lock;
 	spin_unlock_irq(lock);
 
+	bdi_destroy(&q->backing_dev_info);
+
 	/* @q is and will stay empty, shutdown and put */
 	blk_put_queue(q);
 }

block/blk-mq.c

@@ -677,8 +677,11 @@ static void blk_mq_rq_timer(unsigned long priv)
 		data.next = blk_rq_timeout(round_jiffies_up(data.next));
 		mod_timer(&q->timeout, data.next);
 	} else {
-		queue_for_each_hw_ctx(q, hctx, i)
-			blk_mq_tag_idle(hctx);
+		queue_for_each_hw_ctx(q, hctx, i) {
+			/* the hctx may be unmapped, so check it here */
+			if (blk_mq_hw_queue_mapped(hctx))
+				blk_mq_tag_idle(hctx);
+		}
 	}
 }
 
@@ -855,6 +858,16 @@ static void __blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx)
 		spin_lock(&hctx->lock);
 		list_splice(&rq_list, &hctx->dispatch);
 		spin_unlock(&hctx->lock);
+		/*
+		 * the queue is expected stopped with BLK_MQ_RQ_QUEUE_BUSY, but
+		 * it's possible the queue is stopped and restarted again
+		 * before this. Queue restart will dispatch requests. And since
+		 * requests in rq_list aren't added into hctx->dispatch yet,
+		 * the requests in rq_list might get lost.
+		 *
+		 * blk_mq_run_hw_queue() already checks the STOPPED bit
+		 **/
+		blk_mq_run_hw_queue(hctx, true);
 	}
 }
 
@@ -1571,22 +1584,6 @@ static int blk_mq_hctx_cpu_offline(struct blk_mq_hw_ctx *hctx, int cpu)
 	return NOTIFY_OK;
 }
 
-static int blk_mq_hctx_cpu_online(struct blk_mq_hw_ctx *hctx, int cpu)
-{
-	struct request_queue *q = hctx->queue;
-	struct blk_mq_tag_set *set = q->tag_set;
-
-	if (set->tags[hctx->queue_num])
-		return NOTIFY_OK;
-
-	set->tags[hctx->queue_num] = blk_mq_init_rq_map(set, hctx->queue_num);
-	if (!set->tags[hctx->queue_num])
-		return NOTIFY_STOP;
-
-	hctx->tags = set->tags[hctx->queue_num];
-	return NOTIFY_OK;
-}
-
 static int blk_mq_hctx_notify(void *data, unsigned long action,
 			      unsigned int cpu)
 {
@@ -1594,8 +1591,11 @@ static int blk_mq_hctx_notify(void *data, unsigned long action,
 
 	if (action == CPU_DEAD || action == CPU_DEAD_FROZEN)
 		return blk_mq_hctx_cpu_offline(hctx, cpu);
-	else if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN)
-		return blk_mq_hctx_cpu_online(hctx, cpu);
+
+	/*
+	 * In case of CPU online, tags may be reallocated
+	 * in blk_mq_map_swqueue() after mapping is updated.
+	 */
 
 	return NOTIFY_OK;
 }
@@ -1775,6 +1775,7 @@ static void blk_mq_map_swqueue(struct request_queue *q)
 	unsigned int i;
 	struct blk_mq_hw_ctx *hctx;
 	struct blk_mq_ctx *ctx;
+	struct blk_mq_tag_set *set = q->tag_set;
 
 	queue_for_each_hw_ctx(q, hctx, i) {
 		cpumask_clear(hctx->cpumask);
@@ -1803,16 +1804,20 @@ static void blk_mq_map_swqueue(struct request_queue *q)
 		 * disable it and free the request entries.
 		 */
 		if (!hctx->nr_ctx) {
-			struct blk_mq_tag_set *set = q->tag_set;
-
 			if (set->tags[i]) {
 				blk_mq_free_rq_map(set, set->tags[i], i);
 				set->tags[i] = NULL;
-				hctx->tags = NULL;
 			}
+			hctx->tags = NULL;
 			continue;
 		}
 
+		/* unmapped hw queue can be remapped after CPU topo changed */
+		if (!set->tags[i])
+			set->tags[i] = blk_mq_init_rq_map(set, i);
+		hctx->tags = set->tags[i];
+		WARN_ON(!hctx->tags);
+
 		/*
 		 * Set the map size to the number of mapped software queues.
 		 * This is more accurate and more efficient than looping
@@ -2090,9 +2095,16 @@ static int blk_mq_queue_reinit_notify(struct notifier_block *nb,
 	 */
 	list_for_each_entry(q, &all_q_list, all_q_node)
 		blk_mq_freeze_queue_start(q);
-	list_for_each_entry(q, &all_q_list, all_q_node)
+	list_for_each_entry(q, &all_q_list, all_q_node) {
 		blk_mq_freeze_queue_wait(q);
 
+		/*
+		 * timeout handler can't touch hw queue during the
+		 * reinitialization
+		 */
+		del_timer_sync(&q->timeout);
+	}
+
 	list_for_each_entry(q, &all_q_list, all_q_node)
 		blk_mq_queue_reinit(q);
 

block/blk-sysfs.c

@@ -522,8 +522,6 @@ static void blk_release_queue(struct kobject *kobj)
 
 	blk_trace_shutdown(q);
 
-	bdi_destroy(&q->backing_dev_info);
-
 	ida_simple_remove(&blk_queue_ida, q->id);
 	call_rcu(&q->rcu_head, blk_free_queue_rcu);
 }

block/bounce.c

@@ -221,8 +221,8 @@ bounce:
 		if (page_to_pfn(page) <= queue_bounce_pfn(q) && !force)
 			continue;
 
-		inc_zone_page_state(to->bv_page, NR_BOUNCE);
 		to->bv_page = mempool_alloc(pool, q->bounce_gfp);
+		inc_zone_page_state(to->bv_page, NR_BOUNCE);
 
 		if (rw == WRITE) {
 			char *vto, *vfrom;

block/elevator.c

@@ -157,7 +157,7 @@ struct elevator_queue *elevator_alloc(struct request_queue *q,
 
 	eq = kzalloc_node(sizeof(*eq), GFP_KERNEL, q->node);
 	if (unlikely(!eq))
-		goto err;
+		return NULL;
 
 	eq->type = e;
 	kobject_init(&eq->kobj, &elv_ktype);
@@ -165,10 +165,6 @@ struct elevator_queue *elevator_alloc(struct request_queue *q,
 	hash_init(eq->hash);
 
 	return eq;
-err:
-	kfree(eq);
-	elevator_put(e);
-	return NULL;
 }
 EXPORT_SYMBOL(elevator_alloc);
 

drivers/acpi/acpi_pnp.c

@@ -304,6 +304,8 @@ static const struct acpi_device_id acpi_pnp_device_ids[] = {
 	{"PNPb006"},
 	/* cs423x-pnpbios */
 	{"CSC0100"},
+	{"CSC0103"},
+	{"CSC0110"},
 	{"CSC0000"},
 	{"GIM0100"},		/* Guillemot Turtlebeach something appears to be cs4232 compatible */
 	/* es18xx-pnpbios */

drivers/acpi/resource.c

@@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(acpi_dev_get_resources);
  * @ares: Input ACPI resource object.
  * @types: Valid resource types of IORESOURCE_XXX
  *
- * This is a hepler function to support acpi_dev_get_resources(), which filters
+ * This is a helper function to support acpi_dev_get_resources(), which filters
  * ACPI resource objects according to resource types.
  */
 int acpi_dev_filter_resource_type(struct acpi_resource *ares,

drivers/acpi/sbshc.c

@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/dmi.h>
 #include "sbshc.h"
 
 #define PREFIX "ACPI: "
@@ -87,6 +88,8 @@ enum acpi_smb_offset {
 	ACPI_SMB_ALARM_DATA = 0x26,	/* 2 bytes alarm data */
 };
 
+static bool macbook;
+
 static inline int smb_hc_read(struct acpi_smb_hc *hc, u8 address, u8 *data)
 {
 	return ec_read(hc->offset + address, data);
@@ -132,6 +135,8 @@ static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol,
 	}
 
 	mutex_lock(&hc->lock);
+	if (macbook)
+		udelay(5);
 	if (smb_hc_read(hc, ACPI_SMB_PROTOCOL, &temp))
 		goto end;
 	if (temp) {
@@ -257,12 +262,29 @@ extern int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit,
 			      acpi_handle handle, acpi_ec_query_func func,
 			      void *data);
 
+static int macbook_dmi_match(const struct dmi_system_id *d)
+{
+	pr_debug("Detected MacBook, enabling workaround\n");
+	macbook = true;
+	return 0;
+}
+
+static struct dmi_system_id acpi_smbus_dmi_table[] = {
+	{ macbook_dmi_match, "Apple MacBook", {
+	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") },
+	},
+	{ },
+};
+
 static int acpi_smbus_hc_add(struct acpi_device *device)
 {
 	int status;
 	unsigned long long val;
 	struct acpi_smb_hc *hc;
 
+	dmi_check_system(acpi_smbus_dmi_table);
+
 	if (!device)
 		return -EINVAL;
 

drivers/ata/Kconfig

@@ -270,6 +270,7 @@ config ATA_PIIX
 config SATA_DWC
 	tristate "DesignWare Cores SATA support"
 	depends on 460EX
+	select DW_DMAC
 	help
 	  This option enables support for the on-chip SATA controller of the
 	  AppliedMicro processor 460EX.
@@ -729,15 +730,6 @@ config PATA_SC1200
 
 	  If unsure, say N.
 
-config PATA_SCC
-	tristate "Toshiba's Cell Reference Set IDE support"
-	depends on PCI && PPC_CELLEB
-	help
-	  This option enables support for the built-in IDE controller on
-	  Toshiba Cell Reference Board.
-
-	  If unsure, say N.
-
 config PATA_SCH
 	tristate "Intel SCH PATA support"
 	depends on PCI

drivers/ata/Makefile

@@ -75,7 +75,6 @@ obj-$(CONFIG_PATA_PDC_OLD)	+= pata_pdc202xx_old.o
 obj-$(CONFIG_PATA_RADISYS)	+= pata_radisys.o
 obj-$(CONFIG_PATA_RDC)		+= pata_rdc.o
 obj-$(CONFIG_PATA_SC1200)	+= pata_sc1200.o
-obj-$(CONFIG_PATA_SCC)		+= pata_scc.o
 obj-$(CONFIG_PATA_SCH)		+= pata_sch.o
 obj-$(CONFIG_PATA_SERVERWORKS)	+= pata_serverworks.o
 obj-$(CONFIG_PATA_SIL680)	+= pata_sil680.o

drivers/ata/ahci.c

@@ -66,6 +66,7 @@ enum board_ids {
 	board_ahci_yes_fbs,
 
 	/* board IDs for specific chipsets in alphabetical order */
+	board_ahci_avn,
 	board_ahci_mcp65,
 	board_ahci_mcp77,
 	board_ahci_mcp89,
@@ -84,6 +85,8 @@ enum board_ids {
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
 				 unsigned long deadline);
+static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class,
+			      unsigned long deadline);
 static void ahci_mcp89_apple_enable(struct pci_dev *pdev);
 static bool is_mcp89_apple(struct pci_dev *pdev);
 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
@@ -107,6 +110,11 @@ static struct ata_port_operations ahci_p5wdh_ops = {
 	.hardreset		= ahci_p5wdh_hardreset,
 };
 
+static struct ata_port_operations ahci_avn_ops = {
+	.inherits		= &ahci_ops,
+	.hardreset		= ahci_avn_hardreset,
+};
+
 static const struct ata_port_info ahci_port_info[] = {
 	/* by features */
 	[board_ahci] = {
@@ -151,6 +159,12 @@ static const struct ata_port_info ahci_port_info[] = {
 		.port_ops	= &ahci_ops,
 	},
 	/* by chipsets */
+	[board_ahci_avn] = {
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_avn_ops,
+	},
 	[board_ahci_mcp65] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP |
 				 AHCI_HFLAG_YES_NCQ),
@@ -290,14 +304,14 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x1f27), board_ahci }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x1f2e), board_ahci }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x1f2f), board_ahci }, /* Avoton RAID */
-	{ PCI_VDEVICE(INTEL, 0x1f32), board_ahci }, /* Avoton AHCI */
-	{ PCI_VDEVICE(INTEL, 0x1f33), board_ahci }, /* Avoton AHCI */
-	{ PCI_VDEVICE(INTEL, 0x1f34), board_ahci }, /* Avoton RAID */
-	{ PCI_VDEVICE(INTEL, 0x1f35), board_ahci }, /* Avoton RAID */
-	{ PCI_VDEVICE(INTEL, 0x1f36), board_ahci }, /* Avoton RAID */
-	{ PCI_VDEVICE(INTEL, 0x1f37), board_ahci }, /* Avoton RAID */
-	{ PCI_VDEVICE(INTEL, 0x1f3e), board_ahci }, /* Avoton RAID */
-	{ PCI_VDEVICE(INTEL, 0x1f3f), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f32), board_ahci_avn }, /* Avoton AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1f33), board_ahci_avn }, /* Avoton AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1f34), board_ahci_avn }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f35), board_ahci_avn }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f36), board_ahci_avn }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f37), board_ahci_avn }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f3e), board_ahci_avn }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f3f), board_ahci_avn }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */
@@ -670,6 +684,79 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 	return rc;
 }
 
+/*
+ * ahci_avn_hardreset - attempt more aggressive recovery of Avoton ports.
+ *
+ * It has been observed with some SSDs that the timing of events in the
+ * link synchronization phase can leave the port in a state that can not
+ * be recovered by a SATA-hard-reset alone.  The failing signature is
+ * SStatus.DET stuck at 1 ("Device presence detected but Phy
+ * communication not established").  It was found that unloading and
+ * reloading the driver when this problem occurs allows the drive
+ * connection to be recovered (DET advanced to 0x3).  The critical
+ * component of reloading the driver is that the port state machines are
+ * reset by bouncing "port enable" in the AHCI PCS configuration
+ * register.  So, reproduce that effect by bouncing a port whenever we
+ * see DET==1 after a reset.
+ */
+static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class,
+			      unsigned long deadline)
+{
+	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+	struct ata_port *ap = link->ap;
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+	unsigned long tmo = deadline - jiffies;
+	struct ata_taskfile tf;
+	bool online;
+	int rc, i;
+
+	DPRINTK("ENTER\n");
+
+	ahci_stop_engine(ap);
+
+	for (i = 0; i < 2; i++) {
+		u16 val;
+		u32 sstatus;
+		int port = ap->port_no;
+		struct ata_host *host = ap->host;
+		struct pci_dev *pdev = to_pci_dev(host->dev);
+
+		/* clear D2H reception area to properly wait for D2H FIS */
+		ata_tf_init(link->device, &tf);
+		tf.command = ATA_BUSY;
+		ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+		rc = sata_link_hardreset(link, timing, deadline, &online,
+				ahci_check_ready);
+
+		if (sata_scr_read(link, SCR_STATUS, &sstatus) != 0 ||
+				(sstatus & 0xf) != 1)
+			break;
+
+		ata_link_printk(link, KERN_INFO, "avn bounce port%d\n",
+				port);
+
+		pci_read_config_word(pdev, 0x92, &val);
+		val &= ~(1 << port);
+		pci_write_config_word(pdev, 0x92, val);
+		ata_msleep(ap, 1000);
+		val |= 1 << port;
+		pci_write_config_word(pdev, 0x92, val);
+		deadline += tmo;
+	}
+
+	hpriv->start_engine(ap);
+
+	if (online)
+		*class = ahci_dev_classify(ap);
+
+	DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
+	return rc;
+}
+
+
 #ifdef CONFIG_PM
 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {

drivers/ata/ahci_st.c

@@ -37,7 +37,6 @@ struct st_ahci_drv_data {
 	struct reset_control *pwr;
 	struct reset_control *sw_rst;
 	struct reset_control *pwr_rst;
-	struct ahci_host_priv *hpriv;
 };
 
 static void st_ahci_configure_oob(void __iomem *mmio)
@@ -55,9 +54,10 @@ static void st_ahci_configure_oob(void __iomem *mmio)
 	writel(new_val, mmio + ST_AHCI_OOBR);
 }
 
-static int st_ahci_deassert_resets(struct device *dev)
+static int st_ahci_deassert_resets(struct ahci_host_priv *hpriv,
+				struct device *dev)
 {
-	struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev);
+	struct st_ahci_drv_data *drv_data = hpriv->plat_data;
 	int err;
 
 	if (drv_data->pwr) {
@@ -90,8 +90,8 @@ static int st_ahci_deassert_resets(struct device *dev)
 static void st_ahci_host_stop(struct ata_host *host)
 {
 	struct ahci_host_priv *hpriv = host->private_data;
+	struct st_ahci_drv_data *drv_data = hpriv->plat_data;
 	struct device *dev = host->dev;
-	struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev);
 	int err;
 
 	if (drv_data->pwr) {
@@ -103,29 +103,30 @@ static void st_ahci_host_stop(struct ata_host *host)
 	ahci_platform_disable_resources(hpriv);
 }
 
-static int st_ahci_probe_resets(struct platform_device *pdev)
+static int st_ahci_probe_resets(struct ahci_host_priv *hpriv,
+				struct device *dev)
 {
-	struct st_ahci_drv_data *drv_data = platform_get_drvdata(pdev);
+	struct st_ahci_drv_data *drv_data = hpriv->plat_data;
 
-	drv_data->pwr = devm_reset_control_get(&pdev->dev, "pwr-dwn");
+	drv_data->pwr = devm_reset_control_get(dev, "pwr-dwn");
 	if (IS_ERR(drv_data->pwr)) {
-		dev_info(&pdev->dev, "power reset control not defined\n");
+		dev_info(dev, "power reset control not defined\n");
 		drv_data->pwr = NULL;
 	}
 
-	drv_data->sw_rst = devm_reset_control_get(&pdev->dev, "sw-rst");
+	drv_data->sw_rst = devm_reset_control_get(dev, "sw-rst");
 	if (IS_ERR(drv_data->sw_rst)) {
-		dev_info(&pdev->dev, "soft reset control not defined\n");
+		dev_info(dev, "soft reset control not defined\n");
 		drv_data->sw_rst = NULL;
 	}
 
-	drv_data->pwr_rst = devm_reset_control_get(&pdev->dev, "pwr-rst");
+	drv_data->pwr_rst = devm_reset_control_get(dev, "pwr-rst");
 	if (IS_ERR(drv_data->pwr_rst)) {
-		dev_dbg(&pdev->dev, "power soft reset control not defined\n");
+		dev_dbg(dev, "power soft reset control not defined\n");
 		drv_data->pwr_rst = NULL;
 	}
 
-	return st_ahci_deassert_resets(&pdev->dev);
+	return st_ahci_deassert_resets(hpriv, dev);
 }
 
 static struct ata_port_operations st_ahci_port_ops = {
@@ -154,15 +155,12 @@ static int st_ahci_probe(struct platform_device *pdev)
 	if (!drv_data)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, drv_data);
-
 	hpriv = ahci_platform_get_resources(pdev);
 	if (IS_ERR(hpriv))
 		return PTR_ERR(hpriv);
+	hpriv->plat_data = drv_data;
 
-	drv_data->hpriv = hpriv;
-
-	err = st_ahci_probe_resets(pdev);
+	err = st_ahci_probe_resets(hpriv, &pdev->dev);
 	if (err)
 		return err;
 
@@ -170,7 +168,7 @@ static int st_ahci_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	st_ahci_configure_oob(drv_data->hpriv->mmio);
+	st_ahci_configure_oob(hpriv->mmio);
 
 	err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info,
 				      &ahci_platform_sht);
@@ -185,8 +183,9 @@ static int st_ahci_probe(struct platform_device *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int st_ahci_suspend(struct device *dev)
 {
-	struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev);
-	struct ahci_host_priv *hpriv = drv_data->hpriv;
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	struct st_ahci_drv_data *drv_data = hpriv->plat_data;
 	int err;
 
 	err = ahci_platform_suspend_host(dev);
@@ -208,21 +207,21 @@ static int st_ahci_suspend(struct device *dev)
 
 static int st_ahci_resume(struct device *dev)
 {
-	struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev);
-	struct ahci_host_priv *hpriv = drv_data->hpriv;
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
 	int err;
 
 	err = ahci_platform_enable_resources(hpriv);
 	if (err)
 		return err;
 
-	err = st_ahci_deassert_resets(dev);
+	err = st_ahci_deassert_resets(hpriv, dev);
 	if (err) {
 		ahci_platform_disable_resources(hpriv);
 		return err;
 	}
 
-	st_ahci_configure_oob(drv_data->hpriv->mmio);
+	st_ahci_configure_oob(hpriv->mmio);
 
 	return ahci_platform_resume_host(dev);
 }