staging: iio: adis16203: Move header file content to source file.

The contents of the header file are used only by this single source
file. Moved content into adis16203_core.c file and removed adis16203.h
file. Arranged #include files in alphabetical order.

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/staging/iio/accel/adis16203.h

@@ -1,125 +0,0 @@
-#ifndef SPI_ADIS16203_H_
-#define SPI_ADIS16203_H_
-
-#define ADIS16203_STARTUP_DELAY	220 /* ms */
-
-/* Flash memory write count */
-#define ADIS16203_FLASH_CNT      0x00
-
-/* Output, power supply */
-#define ADIS16203_SUPPLY_OUT     0x02
-
-/* Output, auxiliary ADC input */
-#define ADIS16203_AUX_ADC        0x08
-
-/* Output, temperature */
-#define ADIS16203_TEMP_OUT       0x0A
-
-/* Output, x-axis inclination */
-#define ADIS16203_XINCL_OUT      0x0C
-
-/* Output, y-axis inclination */
-#define ADIS16203_YINCL_OUT      0x0E
-
-/* Incline null calibration */
-#define ADIS16203_INCL_NULL      0x18
-
-/* Alarm 1 amplitude threshold */
-#define ADIS16203_ALM_MAG1       0x20
-
-/* Alarm 2 amplitude threshold */
-#define ADIS16203_ALM_MAG2       0x22
-
-/* Alarm 1, sample period */
-#define ADIS16203_ALM_SMPL1      0x24
-
-/* Alarm 2, sample period */
-#define ADIS16203_ALM_SMPL2      0x26
-
-/* Alarm control */
-#define ADIS16203_ALM_CTRL       0x28
-
-/* Auxiliary DAC data */
-#define ADIS16203_AUX_DAC        0x30
-
-/* General-purpose digital input/output control */
-#define ADIS16203_GPIO_CTRL      0x32
-
-/* Miscellaneous control */
-#define ADIS16203_MSC_CTRL       0x34
-
-/* Internal sample period (rate) control */
-#define ADIS16203_SMPL_PRD       0x36
-
-/* Operation, filter configuration */
-#define ADIS16203_AVG_CNT        0x38
-
-/* Operation, sleep mode control */
-#define ADIS16203_SLP_CNT        0x3A
-
-/* Diagnostics, system status register */
-#define ADIS16203_DIAG_STAT      0x3C
-
-/* Operation, system command register */
-#define ADIS16203_GLOB_CMD       0x3E
-
-/* MSC_CTRL */
-
-/* Self-test at power-on: 1 = disabled, 0 = enabled */
-#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST	BIT(10)
-
-/* Reverses rotation of both inclination outputs */
-#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN	BIT(9)
-
-/* Self-test enable */
-#define ADIS16203_MSC_CTRL_SELF_TEST_EN	        BIT(8)
-
-/* Data-ready enable: 1 = enabled, 0 = disabled */
-#define ADIS16203_MSC_CTRL_DATA_RDY_EN	        BIT(2)
-
-/* Data-ready polarity: 1 = active high, 0 = active low */
-#define ADIS16203_MSC_CTRL_ACTIVE_HIGH	        BIT(1)
-
-/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
-#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1	BIT(0)
-
-/* DIAG_STAT */
-
-/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16203_DIAG_STAT_ALARM2        BIT(9)
-
-/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16203_DIAG_STAT_ALARM1        BIT(8)
-
-/* Self-test diagnostic error flag */
-#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5
-
-/* SPI communications failure */
-#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT      3
-
-/* Flash update failure */
-#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT     2
-
-/* Power supply above 3.625 V */
-#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT    1
-
-/* Power supply below 3.15 V */
-#define ADIS16203_DIAG_STAT_POWER_LOW_BIT     0
-
-/* GLOB_CMD */
-
-#define ADIS16203_GLOB_CMD_SW_RESET	BIT(7)
-#define ADIS16203_GLOB_CMD_CLEAR_STAT	BIT(4)
-#define ADIS16203_GLOB_CMD_FACTORY_CAL	BIT(1)
-
-#define ADIS16203_ERROR_ACTIVE          BIT(14)
-
-enum adis16203_scan {
-	ADIS16203_SCAN_INCLI_X,
-	ADIS16203_SCAN_INCLI_Y,
-	ADIS16203_SCAN_SUPPLY,
-	ADIS16203_SCAN_AUX_ADC,
-	ADIS16203_SCAN_TEMP,
-};
-
-#endif /* SPI_ADIS16203_H_ */

drivers/staging/iio/accel/adis16203_core.c

@@ -7,20 +7,140 @@
  */
 
 #include <linux/delay.h>
-#include <linux/mutex.h>
 #include <linux/device.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/imu/adis.h>
+#include <linux/iio/sysfs.h>
+
 #include <linux/kernel.h>
-#include <linux/spi/spi.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/slab.h>
+#include <linux/spi/spi.h>
 #include <linux/sysfs.h>
-#include <linux/module.h>
 
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-#include <linux/iio/buffer.h>
-#include <linux/iio/imu/adis.h>
+#define ADIS16203_STARTUP_DELAY 220 /* ms */
+
+/* Flash memory write count */
+#define ADIS16203_FLASH_CNT      0x00
+
+/* Output, power supply */
+#define ADIS16203_SUPPLY_OUT     0x02
+
+/* Output, auxiliary ADC input */
+#define ADIS16203_AUX_ADC        0x08
+
+/* Output, temperature */
+#define ADIS16203_TEMP_OUT       0x0A
+
+/* Output, x-axis inclination */
+#define ADIS16203_XINCL_OUT      0x0C
+
+/* Output, y-axis inclination */
+#define ADIS16203_YINCL_OUT      0x0E
+
+/* Incline null calibration */
+#define ADIS16203_INCL_NULL      0x18
+
+/* Alarm 1 amplitude threshold */
+#define ADIS16203_ALM_MAG1       0x20
+
+/* Alarm 2 amplitude threshold */
+#define ADIS16203_ALM_MAG2       0x22
+
+/* Alarm 1, sample period */
+#define ADIS16203_ALM_SMPL1      0x24
+
+/* Alarm 2, sample period */
+#define ADIS16203_ALM_SMPL2      0x26
+
+/* Alarm control */
+#define ADIS16203_ALM_CTRL       0x28
 
-#include "adis16203.h"
+/* Auxiliary DAC data */
+#define ADIS16203_AUX_DAC        0x30
+
+/* General-purpose digital input/output control */
+#define ADIS16203_GPIO_CTRL      0x32
+
+/* Miscellaneous control */
+#define ADIS16203_MSC_CTRL       0x34
+
+/* Internal sample period (rate) control */
+#define ADIS16203_SMPL_PRD       0x36
+
+/* Operation, filter configuration */
+#define ADIS16203_AVG_CNT        0x38
+
+/* Operation, sleep mode control */
+#define ADIS16203_SLP_CNT        0x3A
+
+/* Diagnostics, system status register */
+#define ADIS16203_DIAG_STAT      0x3C
+
+/* Operation, system command register */
+#define ADIS16203_GLOB_CMD       0x3E
+
+/* MSC_CTRL */
+
+/* Self-test at power-on: 1 = disabled, 0 = enabled */
+#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST      BIT(10)
+
+/* Reverses rotation of both inclination outputs */
+#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN       BIT(9)
+
+/* Self-test enable */
+#define ADIS16203_MSC_CTRL_SELF_TEST_EN         BIT(8)
+
+/* Data-ready enable: 1 = enabled, 0 = disabled */
+#define ADIS16203_MSC_CTRL_DATA_RDY_EN          BIT(2)
+
+/* Data-ready polarity: 1 = active high, 0 = active low */
+#define ADIS16203_MSC_CTRL_ACTIVE_HIGH          BIT(1)
+
+/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
+#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1        BIT(0)
+
+/* DIAG_STAT */
+
+/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
+#define ADIS16203_DIAG_STAT_ALARM2        BIT(9)
+
+/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
+#define ADIS16203_DIAG_STAT_ALARM1        BIT(8)
+
+/* Self-test diagnostic error flag */
+#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5
+
+/* SPI communications failure */
+#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT      3
+
+/* Flash update failure */
+#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT     2
+
+/* Power supply above 3.625 V */
+#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT    1
+
+/* Power supply below 3.15 V */
+#define ADIS16203_DIAG_STAT_POWER_LOW_BIT     0
+
+/* GLOB_CMD */
+
+#define ADIS16203_GLOB_CMD_SW_RESET     BIT(7)
+#define ADIS16203_GLOB_CMD_CLEAR_STAT   BIT(4)
+#define ADIS16203_GLOB_CMD_FACTORY_CAL  BIT(1)
+
+#define ADIS16203_ERROR_ACTIVE          BIT(14)
+
+enum adis16203_scan {
+	 ADIS16203_SCAN_INCLI_X,
+	 ADIS16203_SCAN_INCLI_Y,
+	 ADIS16203_SCAN_SUPPLY,
+	 ADIS16203_SCAN_AUX_ADC,
+	 ADIS16203_SCAN_TEMP,
+};
 
 #define DRIVER_NAME		"adis16203"