Merge branch 'ti/4.19-pull' of https://bitbucket.itg.ti.com/scm/~a0400822/linux into audio_display-ti-linux-4.19.y

missing dtbs for 2019.00

* 'ti/4.19-pull' of https://bitbucket.itg.ti.com/scm/~a0400822/linux:
  ARM: dts: am335x-icev2: Add support for OSD9616P0899-10 at i2c0
  ARM: dts: k2g-ice: add OLED panel
  arm64: dts: Add k3-am654-evm-tc358876.dtso
  ARM: dts: dra76-evm: add DVI & HDMI outputs

arch/arm/boot/dts/Makefile

@@ -757,7 +757,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
 	dra72-evm.dtb \
 	dra72-evm-revc.dtb \
 	dra71-evm.dtb \
-	dra76-evm.dtb
+	dra76-evm.dtb \
+	dra76-evm-tfp410.dtb
 dtb-merge-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-evm.dtb \
 	am57xx-evm-cam-mt9t111.dtb \

arch/arm/boot/dts/am335x-icev2.dts

@@ -290,6 +290,19 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	/* osd9616p0899-10 */
+	display@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <16>;
+		solomon,width = <96>;
+		solomon,com-seq;
+		solomon,com-invdir;
+		solomon,page-offset = <0>;
+		solomon,prechargep1 = <2>;
+		solomon,prechargep2 = <13>;
+	};
 };
 
 &spi0 {

arch/arm/boot/dts/dra76-evm-tfp410.dts

@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * TFP410 expansion board for DRA76 EVM.
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "dra76-evm.dts"
+
+/ {
+	aliases {
+		display0 = &dvi0;
+		display1 = &hdmi0;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		hpd-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;	/* wakeup2/sys_nirq2/gpio1_2 HPD */
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "ok";
+
+		port {
+			reg = <0>;
+
+			dpi_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+				data-lines = <24>;
+			};
+		};
+	};
+};
+
+&gpio3 {
+	p1 {
+		/* GPIO3_1 CON_LCD_PWR_DN */
+		/* This affects the TFP410 and the USB */
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "CON_LCD_PWR_DN";
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	pcf_tfp: pcf8757@20 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		p2 {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "ct_hpd";
+		};
+
+		p3 {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "ls_oe";
+		};
+	};
+};

arch/arm/boot/dts/dra76-evm.dts

@@ -16,6 +16,13 @@
 	model = "TI DRA762 EVM";
 	compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
 
+	aliases {
+		display0 = &hdmi0;
+
+		sound0 = &sound0;
+		sound1 = &hdmi;
+	};
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
@@ -119,6 +126,48 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>,   /* gpio7_30, CT CP HPD */
+			<&gpio7 31 GPIO_ACTIVE_HIGH>,   /* gpio7_31, LS OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -467,6 +516,23 @@
 	phy-supply = <&ldo3_reg>;
 };
 
+&dss {
+	status = "ok";
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&hdmi {
+	status = "ok";
+
+	vdda-supply = <&ldo1_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
 &qspi {
 	spi-max-frequency = <96000000>;
 	m25p80@0 {

arch/arm/boot/dts/keystone-k2g-ice.dts

@@ -417,6 +417,21 @@
 		#gpio-cells = <2>;
 		vcc-supply = <&vdd_3v3>;
 	};
+
+	/* osd9616p0899-10 */
+	display@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		reg = <0x3c>;
+		reset-gpios = <&gpio1 52 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vddb>;
+		solomon,height = <16>;
+		solomon,width = <96>;
+		solomon,com-seq;
+		solomon,com-invdir;
+		solomon,page-offset = <0>;
+		solomon,prechargep1 = <2>;
+		solomon,prechargep2 = <13>;
+	};
 };
 
 &qmss {

arch/arm64/boot/dts/ti/Makefile

@@ -11,6 +11,7 @@ DTC_FLAGS += -@
 dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb \
 	k3-am654-gp.dtbo \
 	k3-am654-evm-oldi-lcd1evm.dtbo \
+	k3-am654-evm-tc358876.dtbo \
 	k3-am654-pcie-usb3.dtbo \
 	k3-am654-pcie-usb2.dtbo \
 	k3-am654-evm-csi2-ov490.dtbo

arch/arm64/boot/dts/ti/k3-am654-evm-tc358876.dtso

@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * Toshiba TC358867 expansion board for AM654-EVM.
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/k3.h>
+
+/ {
+  fragment@101 {
+	target-path = "/";
+
+	__overlay__ {
+		dp_refclk: clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+	};
+  };
+};
+
+&main_pmx0 {
+	dss_vout1_pins_default: dss_vout1_pins_default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0000, PIN_OUTPUT, 1)	/* VOUT1_DATA0 */
+			AM65X_IOPAD(0x0004, PIN_OUTPUT, 1)	/* VOUT1_DATA1 */
+			AM65X_IOPAD(0x0008, PIN_OUTPUT, 1)	/* VOUT1_DATA2 */
+			AM65X_IOPAD(0x000c, PIN_OUTPUT, 1)	/* VOUT1_DATA3 */
+			AM65X_IOPAD(0x0010, PIN_OUTPUT, 1)	/* VOUT1_DATA4 */
+			AM65X_IOPAD(0x0014, PIN_OUTPUT, 1)	/* VOUT1_DATA5 */
+			AM65X_IOPAD(0x0018, PIN_OUTPUT, 1)	/* VOUT1_DATA6 */
+			AM65X_IOPAD(0x001c, PIN_OUTPUT, 1)	/* VOUT1_DATA7 */
+			AM65X_IOPAD(0x0020, PIN_OUTPUT, 1)	/* VOUT1_DATA8 */
+			AM65X_IOPAD(0x0024, PIN_OUTPUT, 1)	/* VOUT1_DATA9 */
+			AM65X_IOPAD(0x0028, PIN_OUTPUT, 1)	/* VOUT1_DATA10 */
+			AM65X_IOPAD(0x002c, PIN_OUTPUT, 1)	/* VOUT1_DATA11 */
+			AM65X_IOPAD(0x0030, PIN_OUTPUT, 1)	/* VOUT1_DATA12 */
+			AM65X_IOPAD(0x0034, PIN_OUTPUT, 1)	/* VOUT1_DATA13 */
+			AM65X_IOPAD(0x0038, PIN_OUTPUT, 1)	/* VOUT1_DATA14 */
+			AM65X_IOPAD(0x003c, PIN_OUTPUT, 1)	/* VOUT1_DATA15 */
+			AM65X_IOPAD(0x0040, PIN_OUTPUT, 1)	/* VOUT1_DATA16 */
+			AM65X_IOPAD(0x0044, PIN_OUTPUT, 1)	/* VOUT1_DATA17 */
+			AM65X_IOPAD(0x0048, PIN_OUTPUT, 1)	/* VOUT1_DATA18 */
+			AM65X_IOPAD(0x004c, PIN_OUTPUT, 1)	/* VOUT1_DATA19 */
+			AM65X_IOPAD(0x0050, PIN_OUTPUT, 1)	/* VOUT1_DATA20 */
+			AM65X_IOPAD(0x0054, PIN_OUTPUT, 1)	/* VOUT1_DATA21 */
+			AM65X_IOPAD(0x0058, PIN_OUTPUT, 1)	/* VOUT1_DATA22 */
+			AM65X_IOPAD(0x005c, PIN_OUTPUT, 1)	/* VOUT1_DATA23 */
+			AM65X_IOPAD(0x0060, PIN_OUTPUT, 1)	/* VOUT1_VSYNC */
+			AM65X_IOPAD(0x0064, PIN_OUTPUT, 1)	/* VOUT1_HSYNC */
+			AM65X_IOPAD(0x0068, PIN_OUTPUT, 1)	/* VOUT1_PCLK */
+			AM65X_IOPAD(0x006c, PIN_OUTPUT, 1)	/* VOUT1_DE */
+		>;
+	};
+};
+
+&main_i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	edp-bridge@f {
+		compatible = "toshiba,tc358867", "toshiba,tc358767";
+		reg = <0x0f>;
+
+		reset-gpios = <&pca9555 6 GPIO_ACTIVE_HIGH>;
+
+		clock-names = "ref";
+		clocks = <&dp_refclk>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout1_pins_default>;
+
+	assigned-clocks = <&k3_clks 67 2>;
+	assigned-clock-parents = <&k3_clks 67 5>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	port@1 {
+		reg = <1>;
+
+		dpi_out: endpoint {
+			remote-endpoint = <&bridge_in>;
+		};
+	};
+};