Merge tag 'topic/synopsys-media-formats-2017-04-03' of git://anongit.freedesktop.org/git/drm-misc into drm-misc-next

Media formats for synopsys HDMI  TX Controller

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403163544.kcw5kk52tgku5xua@art_vandelay

Documentation/admin-guide/kernel-parameters.txt

@@ -1725,6 +1725,12 @@
 			kernel and module base offset ASLR (Address Space
 			Layout Randomization).
 
+	kasan_multi_shot
+			[KNL] Enforce KASAN (Kernel Address Sanitizer) to print
+			report on every invalid memory access. Without this
+			parameter KASAN will print report only for the first
+			invalid access.
+
 	keepinitrd	[HW,ARM]
 
 	kernelcore=	[KNL,X86,IA-64,PPC]

Documentation/devicetree/bindings/rng/omap_rng.txt

@@ -12,7 +12,8 @@ Required properties:
 - reg : Offset and length of the register set for the module
 - interrupts : the interrupt number for the RNG module.
 		Used for "ti,omap4-rng" and "inside-secure,safexcel-eip76"
-- clocks: the trng clock source
+- clocks: the trng clock source. Only mandatory for the
+  "inside-secure,safexcel-eip76" compatible.
 
 Example:
 /* AM335x */

Documentation/media/uapi/v4l/subdev-formats.rst

@@ -1258,157 +1258,470 @@ The following tables list existing packed RGB formats.
       - b\ :sub:`2`
       - b\ :sub:`1`
       - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB101010-1X30:
+
+      - MEDIA_BUS_FMT_RGB101010_1X30
+      - 0x1018
+      -
+      - 0
+      - 0
+      - r\ :sub:`9`
+      - r\ :sub:`8`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
 
 .. raw:: latex
 
     \endgroup
 
-On LVDS buses, usually each sample is transferred serialized in seven
-time slots per pixel clock, on three (18-bit) or four (24-bit)
-differential data pairs at the same time. The remaining bits are used
-for control signals as defined by SPWG/PSWG/VESA or JEIDA standards. The
-24-bit RGB format serialized in seven time slots on four lanes using
-JEIDA defined bit mapping will be named
-``MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA``, for example.
 
-.. raw:: latex
+The following table list existing packed 36bit wide RGB formats.
 
-    \begin{adjustbox}{width=\columnwidth}
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
 
-.. _v4l2-mbus-pixelcode-rgb-lvds:
+.. _v4l2-mbus-pixelcode-rgb-36:
 
-.. flat-table:: LVDS RGB formats
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. flat-table:: 36bit RGB formats
     :header-rows:  2
     :stub-columns: 0
+    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
 
     * - Identifier
       - Code
       -
-      -
-      - :cspan:`3` Data organization
+      - :cspan:`35` Data organization
     * -
       -
-      - Timeslot
-      - Lane
+      - Bit
+      - 35
+      - 34
+      - 33
+      - 32
+      - 31
+      - 30
+      - 29
+      - 28
+      - 27
+      - 26
+      - 25
+      - 24
+      - 23
+      - 22
+      - 21
+      - 20
+      - 19
+      - 18
+      - 17
+      - 16
+      - 15
+      - 14
+      - 13
+      - 12
+      - 11
+      - 10
+      - 9
+      - 8
+      - 7
+      - 6
+      - 5
+      - 4
       - 3
       - 2
       - 1
       - 0
-    * .. _MEDIA-BUS-FMT-RGB666-1X7X3-SPWG:
+    * .. _MEDIA-BUS-FMT-RGB121212-1X36:
 
-      - MEDIA_BUS_FMT_RGB666_1X7X3_SPWG
-      - 0x1010
-      - 0
+      - MEDIA_BUS_FMT_RGB121212_1X36
+      - 0x1019
       -
-      -
-      - d
-      - b\ :sub:`1`
+      - r\ :sub:`11`
+      - r\ :sub:`10`
+      - r\ :sub:`9`
+      - r\ :sub:`8`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - g\ :sub:`11`
+      - g\ :sub:`10`
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
       - g\ :sub:`0`
+      - b\ :sub:`11`
+      - b\ :sub:`10`
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+.. raw:: latex
+
+    \endgroup
+
+
+The following table list existing packed 48bit wide RGB formats.
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _v4l2-mbus-pixelcode-rgb-48:
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. flat-table:: 48bit RGB formats
+    :header-rows:  3
+    :stub-columns: 0
+    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+
+    * - Identifier
+      - Code
+      -
+      - :cspan:`31` Data organization
     * -
       -
-      - 1
+      - Bit
       -
       -
-      - d
-      - b\ :sub:`0`
-      - r\ :sub:`5`
-    * -
       -
-      - 2
       -
       -
-      - d
-      - g\ :sub:`5`
-      - r\ :sub:`4`
-    * -
       -
-      - 3
       -
       -
-      - b\ :sub:`5`
-      - g\ :sub:`4`
-      - r\ :sub:`3`
-    * -
       -
-      - 4
       -
       -
-      - b\ :sub:`4`
-      - g\ :sub:`3`
-      - r\ :sub:`2`
-    * -
       -
-      - 5
       -
       -
-      - b\ :sub:`3`
-      - g\ :sub:`2`
-      - r\ :sub:`1`
+      -
+      -
+      - 47
+      - 46
+      - 45
+      - 44
+      - 43
+      - 42
+      - 41
+      - 40
+      - 39
+      - 38
+      - 37
+      - 36
+      - 35
+      - 34
+      - 33
+      - 32
     * -
       -
+      -
+      - 31
+      - 30
+      - 29
+      - 28
+      - 27
+      - 26
+      - 25
+      - 24
+      - 23
+      - 22
+      - 21
+      - 20
+      - 19
+      - 18
+      - 17
+      - 16
+      - 15
+      - 14
+      - 13
+      - 12
+      - 11
+      - 10
+      - 9
+      - 8
+      - 7
       - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-RGB161616-1X48:
+
+      - MEDIA_BUS_FMT_RGB161616_1X48
+      - 0x101a
       -
       -
-      - b\ :sub:`2`
-      - g\ :sub:`1`
-      - r\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-RGB888-1X7X4-SPWG:
-
-      - MEDIA_BUS_FMT_RGB888_1X7X4_SPWG
-      - 0x1011
-      - 0
       -
-      - d
-      - d
-      - b\ :sub:`1`
-      - g\ :sub:`0`
-    * -
       -
-      - 1
       -
-      - b\ :sub:`7`
-      - d
-      - b\ :sub:`0`
-      - r\ :sub:`5`
-    * -
       -
-      - 2
       -
-      - b\ :sub:`6`
-      - d
-      - g\ :sub:`5`
-      - r\ :sub:`4`
-    * -
       -
-      - 3
       -
-      - g\ :sub:`7`
-      - b\ :sub:`5`
-      - g\ :sub:`4`
-      - r\ :sub:`3`
-    * -
       -
-      - 4
       -
-      - g\ :sub:`6`
-      - b\ :sub:`4`
-      - g\ :sub:`3`
-      - r\ :sub:`2`
-    * -
       -
-      - 5
       -
-      - r\ :sub:`7`
-      - b\ :sub:`3`
-      - g\ :sub:`2`
-      - r\ :sub:`1`
-    * -
       -
-      - 6
       -
-      - r\ :sub:`6`
-      - b\ :sub:`2`
-      - g\ :sub:`1`
+      -
+      -
+      - r\ :sub:`15`
+      - r\ :sub:`14`
+      - r\ :sub:`13`
+      - r\ :sub:`12`
+      - r\ :sub:`11`
+      - r\ :sub:`10`
+      - r\ :sub:`9`
+      - r\ :sub:`8`
+      - r\ :sub:`7`
+      - r\ :sub:`6`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * -
+      -
+      -
+      - g\ :sub:`15`
+      - g\ :sub:`14`
+      - g\ :sub:`13`
+      - g\ :sub:`12`
+      - g\ :sub:`11`
+      - g\ :sub:`10`
+      - g\ :sub:`9`
+      - g\ :sub:`8`
+      - g\ :sub:`7`
+      - g\ :sub:`6`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - b\ :sub:`15`
+      - b\ :sub:`14`
+      - b\ :sub:`13`
+      - b\ :sub:`12`
+      - b\ :sub:`11`
+      - b\ :sub:`10`
+      - b\ :sub:`9`
+      - b\ :sub:`8`
+      - b\ :sub:`7`
+      - b\ :sub:`6`
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+
+.. raw:: latex
+
+    \endgroup
+
+On LVDS buses, usually each sample is transferred serialized in seven
+time slots per pixel clock, on three (18-bit) or four (24-bit)
+differential data pairs at the same time. The remaining bits are used
+for control signals as defined by SPWG/PSWG/VESA or JEIDA standards. The
+24-bit RGB format serialized in seven time slots on four lanes using
+JEIDA defined bit mapping will be named
+``MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA``, for example.
+
+.. raw:: latex
+
+    \begin{adjustbox}{width=\columnwidth}
+
+.. _v4l2-mbus-pixelcode-rgb-lvds:
+
+.. flat-table:: LVDS RGB formats
+    :header-rows:  2
+    :stub-columns: 0
+
+    * - Identifier
+      - Code
+      -
+      -
+      - :cspan:`3` Data organization
+    * -
+      -
+      - Timeslot
+      - Lane
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-RGB666-1X7X3-SPWG:
+
+      - MEDIA_BUS_FMT_RGB666_1X7X3_SPWG
+      - 0x1010
+      - 0
+      -
+      -
+      - d
+      - b\ :sub:`1`
+      - g\ :sub:`0`
+    * -
+      -
+      - 1
+      -
+      -
+      - d
+      - b\ :sub:`0`
+      - r\ :sub:`5`
+    * -
+      -
+      - 2
+      -
+      -
+      - d
+      - g\ :sub:`5`
+      - r\ :sub:`4`
+    * -
+      -
+      - 3
+      -
+      -
+      - b\ :sub:`5`
+      - g\ :sub:`4`
+      - r\ :sub:`3`
+    * -
+      -
+      - 4
+      -
+      -
+      - b\ :sub:`4`
+      - g\ :sub:`3`
+      - r\ :sub:`2`
+    * -
+      -
+      - 5
+      -
+      -
+      - b\ :sub:`3`
+      - g\ :sub:`2`
+      - r\ :sub:`1`
+    * -
+      -
+      - 6
+      -
+      -
+      - b\ :sub:`2`
+      - g\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB888-1X7X4-SPWG:
+
+      - MEDIA_BUS_FMT_RGB888_1X7X4_SPWG
+      - 0x1011
+      - 0
+      -
+      - d
+      - d
+      - b\ :sub:`1`
+      - g\ :sub:`0`
+    * -
+      -
+      - 1
+      -
+      - b\ :sub:`7`
+      - d
+      - b\ :sub:`0`
+      - r\ :sub:`5`
+    * -
+      -
+      - 2
+      -
+      - b\ :sub:`6`
+      - d
+      - g\ :sub:`5`
+      - r\ :sub:`4`
+    * -
+      -
+      - 3
+      -
+      - g\ :sub:`7`
+      - b\ :sub:`5`
+      - g\ :sub:`4`
+      - r\ :sub:`3`
+    * -
+      -
+      - 4
+      -
+      - g\ :sub:`6`
+      - b\ :sub:`4`
+      - g\ :sub:`3`
+      - r\ :sub:`2`
+    * -
+      -
+      - 5
+      -
+      - r\ :sub:`7`
+      - b\ :sub:`3`
+      - g\ :sub:`2`
+      - r\ :sub:`1`
+    * -
+      -
+      - 6
+      -
+      - r\ :sub:`6`
+      - b\ :sub:`2`
+      - g\ :sub:`1`
       - r\ :sub:`0`
     * .. _MEDIA-BUS-FMT-RGB888-1X7X4-JEIDA:
 
@@ -2344,7 +2657,8 @@ The format code is made of the following information.
 
 -  The number of bus samples per pixel. Pixels that are wider than the
    bus width must be transferred in multiple samples. Common values are
-   1, 1.5 (encoded as 1_5) and 2.
+   0.5 (encoded as 0_5; in this case two pixels are transferred per bus
+   sample), 1, 1.5 (encoded as 1_5) and 2.
 
 -  The bus width. When the bus width is larger than the number of bits
    per pixel component, several components are packed in a single bus
@@ -2472,10 +2786,399 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UV8-1X8:
-
-      - MEDIA_BUS_FMT_UV8_1X8
-      - 0x2015
+    * .. _MEDIA-BUS-FMT-UV8-1X8:
+
+      - MEDIA_BUS_FMT_UV8_1X8
+      - 0x2015
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYVY8-1_5X8:
+
+      - MEDIA_BUS_FMT_UYVY8_1_5X8
+      - 0x2002
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-VYUY8-1_5X8:
+
+      - MEDIA_BUS_FMT_VYUY8_1_5X8
+      - 0x2003
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
       -
       -
       -
@@ -2536,18 +3239,123 @@ the following codes.
       -
       -
       -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY8-1_5X8:
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUYV8-1_5X8:
 
-      - MEDIA_BUS_FMT_UYVY8_1_5X8
-      - 0x2002
+      - MEDIA_BUS_FMT_YUYV8_1_5X8
+      - 0x2004
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
       -
       -
       -
@@ -2686,8 +3494,10 @@ the following codes.
       - v\ :sub:`2`
       - v\ :sub:`1`
       - v\ :sub:`0`
-    * -
-      -
+    * .. _MEDIA-BUS-FMT-YVYU8-1_5X8:
+
+      - MEDIA_BUS_FMT_YVYU8_1_5X8
+      - 0x2005
       -
       -
       -
@@ -2756,10 +3566,8 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY8-1_5X8:
-
-      - MEDIA_BUS_FMT_VYUY8_1_5X8
-      - 0x2003
+    * -
+      -
       -
       -
       -
@@ -2898,6 +3706,43 @@ the following codes.
       - u\ :sub:`2`
       - u\ :sub:`1`
       - u\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYVY8-2X8:
+
+      - MEDIA_BUS_FMT_UYVY8_2X8
+      - 0x2006
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
     * -
       -
       -
@@ -2933,6 +3778,41 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
+    * -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
     * -
       -
       -
@@ -2968,10 +3848,10 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV8-1_5X8:
+    * .. _MEDIA-BUS-FMT-VYUY8-2X8:
 
-      - MEDIA_BUS_FMT_YUYV8_1_5X8
-      - 0x2004
+      - MEDIA_BUS_FMT_VYUY8_2X8
+      - 0x2007
       -
       -
       -
@@ -2997,14 +3877,14 @@ the following codes.
       -
       -
       -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
     * -
       -
       -
@@ -3110,8 +3990,10 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * -
-      -
+    * .. _MEDIA-BUS-FMT-YUYV8-2X8:
+
+      - MEDIA_BUS_FMT_YUYV8_2X8
+      - 0x2008
       -
       -
       -
@@ -3172,18 +4054,16 @@ the following codes.
       -
       -
       -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU8-1_5X8:
-
-      - MEDIA_BUS_FMT_YVYU8_1_5X8
-      - 0x2005
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * -
+      -
       -
       -
       -
@@ -3244,6 +4124,43 @@ the following codes.
       -
       -
       -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YVYU8-2X8:
+
+      - MEDIA_BUS_FMT_YVYU8_2X8
+      - 0x2009
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -3349,18 +4266,18 @@ the following codes.
       -
       -
       -
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-Y10-1X10:
+
+      - MEDIA_BUS_FMT_Y10_1X10
+      - 0x200a
       -
       -
       -
@@ -3384,20 +4301,20 @@ the following codes.
       -
       -
       -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY8-2X8:
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYVY10-2X10:
 
-      - MEDIA_BUS_FMT_UYVY8_2X8
-      - 0x2006
-      -
-      -
+      - MEDIA_BUS_FMT_UYVY10_2X10
+      - 0x2018
       -
       -
       -
@@ -3421,6 +4338,8 @@ the following codes.
       -
       -
       -
+      - u\ :sub:`9`
+      - u\ :sub:`8`
       - u\ :sub:`7`
       - u\ :sub:`6`
       - u\ :sub:`5`
@@ -3454,8 +4373,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -3489,8 +4408,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
       - v\ :sub:`7`
       - v\ :sub:`6`
       - v\ :sub:`5`
@@ -3524,8 +4443,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -3534,12 +4453,10 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY8-2X8:
+    * .. _MEDIA-BUS-FMT-VYUY10-2X10:
 
-      - MEDIA_BUS_FMT_VYUY8_2X8
-      - 0x2007
-      -
-      -
+      - MEDIA_BUS_FMT_VYUY10_2X10
+      - 0x2019
       -
       -
       -
@@ -3563,6 +4480,8 @@ the following codes.
       -
       -
       -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
       - v\ :sub:`7`
       - v\ :sub:`6`
       - v\ :sub:`5`
@@ -3596,8 +4515,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -3631,8 +4550,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - u\ :sub:`9`
+      - u\ :sub:`8`
       - u\ :sub:`7`
       - u\ :sub:`6`
       - u\ :sub:`5`
@@ -3666,8 +4585,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -3676,12 +4595,10 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV8-2X8:
+    * .. _MEDIA-BUS-FMT-YUYV10-2X10:
 
-      - MEDIA_BUS_FMT_YUYV8_2X8
-      - 0x2008
-      -
-      -
+      - MEDIA_BUS_FMT_YUYV10_2X10
+      - 0x200b
       -
       -
       -
@@ -3705,6 +4622,8 @@ the following codes.
       -
       -
       -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -3738,8 +4657,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - u\ :sub:`9`
+      - u\ :sub:`8`
       - u\ :sub:`7`
       - u\ :sub:`6`
       - u\ :sub:`5`
@@ -3773,8 +4692,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -3808,8 +4727,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
       - v\ :sub:`7`
       - v\ :sub:`6`
       - v\ :sub:`5`
@@ -3818,12 +4737,10 @@ the following codes.
       - v\ :sub:`2`
       - v\ :sub:`1`
       - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU8-2X8:
+    * .. _MEDIA-BUS-FMT-YVYU10-2X10:
 
-      - MEDIA_BUS_FMT_YVYU8_2X8
-      - 0x2009
-      -
-      -
+      - MEDIA_BUS_FMT_YVYU10_2X10
+      - 0x200c
       -
       -
       -
@@ -3847,6 +4764,8 @@ the following codes.
       -
       -
       -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -3880,8 +4799,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
       - v\ :sub:`7`
       - v\ :sub:`6`
       - v\ :sub:`5`
@@ -3915,8 +4834,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -3950,8 +4869,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - u\ :sub:`9`
+      - u\ :sub:`8`
       - u\ :sub:`7`
       - u\ :sub:`6`
       - u\ :sub:`5`
@@ -3960,12 +4879,10 @@ the following codes.
       - u\ :sub:`2`
       - u\ :sub:`1`
       - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-Y10-1X10:
+    * .. _MEDIA-BUS-FMT-Y12-1X12:
 
-      - MEDIA_BUS_FMT_Y10_1X10
-      - 0x200a
-      -
-      -
+      - MEDIA_BUS_FMT_Y12_1X12
+      - 0x2013
       -
       -
       -
@@ -3987,6 +4904,8 @@ the following codes.
       -
       -
       -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -3997,12 +4916,10 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY10-2X10:
+    * .. _MEDIA-BUS-FMT-UYVY12-2X12:
 
-      - MEDIA_BUS_FMT_UYVY10_2X10
-      - 0x2018
-      -
-      -
+      - MEDIA_BUS_FMT_UYVY12_2X12
+      - 0x201c
       -
       -
       -
@@ -4024,6 +4941,8 @@ the following codes.
       -
       -
       -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
       - u\ :sub:`9`
       - u\ :sub:`8`
       - u\ :sub:`7`
@@ -4057,8 +4976,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -4092,8 +5011,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
       - v\ :sub:`9`
       - v\ :sub:`8`
       - v\ :sub:`7`
@@ -4127,8 +5046,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -4139,12 +5058,10 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY10-2X10:
+    * .. _MEDIA-BUS-FMT-VYUY12-2X12:
 
-      - MEDIA_BUS_FMT_VYUY10_2X10
-      - 0x2019
-      -
-      -
+      - MEDIA_BUS_FMT_VYUY12_2X12
+      - 0x201d
       -
       -
       -
@@ -4166,6 +5083,8 @@ the following codes.
       -
       -
       -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
       - v\ :sub:`9`
       - v\ :sub:`8`
       - v\ :sub:`7`
@@ -4199,8 +5118,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -4234,8 +5153,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
       - u\ :sub:`9`
       - u\ :sub:`8`
       - u\ :sub:`7`
@@ -4246,9 +5165,7 @@ the following codes.
       - u\ :sub:`2`
       - u\ :sub:`1`
       - u\ :sub:`0`
-    * -
-      -
-      -
+    * -
       -
       -
       -
@@ -4271,6 +5188,8 @@ the following codes.
       -
       -
       -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -4281,12 +5200,10 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV10-2X10:
+    * .. _MEDIA-BUS-FMT-YUYV12-2X12:
 
-      - MEDIA_BUS_FMT_YUYV10_2X10
-      - 0x200b
-      -
-      -
+      - MEDIA_BUS_FMT_YUYV12_2X12
+      - 0x201e
       -
       -
       -
@@ -4308,6 +5225,8 @@ the following codes.
       -
       -
       -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -4341,8 +5260,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
       - u\ :sub:`9`
       - u\ :sub:`8`
       - u\ :sub:`7`
@@ -4376,8 +5295,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -4411,8 +5330,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
       - v\ :sub:`9`
       - v\ :sub:`8`
       - v\ :sub:`7`
@@ -4423,12 +5342,10 @@ the following codes.
       - v\ :sub:`2`
       - v\ :sub:`1`
       - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU10-2X10:
+    * .. _MEDIA-BUS-FMT-YVYU12-2X12:
 
-      - MEDIA_BUS_FMT_YVYU10_2X10
-      - 0x200c
-      -
-      -
+      - MEDIA_BUS_FMT_YVYU12_2X12
+      - 0x201f
       -
       -
       -
@@ -4450,6 +5367,8 @@ the following codes.
       -
       -
       -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -4483,8 +5402,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
       - v\ :sub:`9`
       - v\ :sub:`8`
       - v\ :sub:`7`
@@ -4518,8 +5437,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -4553,8 +5472,8 @@ the following codes.
       -
       -
       -
-      -
-      -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
       - u\ :sub:`9`
       - u\ :sub:`8`
       - u\ :sub:`7`
@@ -4565,51 +5484,10 @@ the following codes.
       - u\ :sub:`2`
       - u\ :sub:`1`
       - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-Y12-1X12:
-
-      - MEDIA_BUS_FMT_Y12_1X12
-      - 0x2013
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY12-2X12:
+    * .. _MEDIA-BUS-FMT-UYVY8-1X16:
 
-      - MEDIA_BUS_FMT_UYVY12_2X12
-      - 0x201c
-      -
-      -
-      -
-      -
+      - MEDIA_BUS_FMT_UYVY8_1X16
+      - 0x200f
       -
       -
       -
@@ -4627,10 +5505,6 @@ the following codes.
       -
       -
       -
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
       - u\ :sub:`7`
       - u\ :sub:`6`
       - u\ :sub:`5`
@@ -4639,6 +5513,14 @@ the following codes.
       - u\ :sub:`2`
       - u\ :sub:`1`
       - u\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
     * -
       -
       -
@@ -4658,14 +5540,14 @@ the following codes.
       -
       -
       -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -4674,12 +5556,10 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
+    * .. _MEDIA-BUS-FMT-VYUY8-1X16:
+
+      - MEDIA_BUS_FMT_VYUY8_1X16
+      - 0x2010
       -
       -
       -
@@ -4697,10 +5577,6 @@ the following codes.
       -
       -
       -
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
       - v\ :sub:`7`
       - v\ :sub:`6`
       - v\ :sub:`5`
@@ -4709,6 +5585,14 @@ the following codes.
       - v\ :sub:`2`
       - v\ :sub:`1`
       - v\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
     * -
       -
       -
@@ -4728,14 +5612,14 @@ the following codes.
       -
       -
       -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -4744,14 +5628,10 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY12-2X12:
+    * .. _MEDIA-BUS-FMT-YUYV8-1X16:
 
-      - MEDIA_BUS_FMT_VYUY12_2X12
-      - 0x201d
-      -
-      -
-      -
-      -
+      - MEDIA_BUS_FMT_YUYV8_1X16
+      - 0x2011
       -
       -
       -
@@ -4769,18 +5649,22 @@ the following codes.
       -
       -
       -
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
     * -
       -
       -
@@ -4800,14 +5684,6 @@ the following codes.
       -
       -
       -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -4816,12 +5692,18 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YVYU8-1X16:
+
+      - MEDIA_BUS_FMT_YVYU8_1X16
+      - 0x2012
       -
       -
       -
@@ -4839,18 +5721,22 @@ the following codes.
       -
       -
       -
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
     * -
       -
       -
@@ -4870,14 +5756,6 @@ the following codes.
       -
       -
       -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -4886,14 +5764,18 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV12-2X12:
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YDYUYDYV8-1X16:
 
-      - MEDIA_BUS_FMT_YUYV12_2X12
-      - 0x201e
-      -
-      -
-      -
-      -
+      - MEDIA_BUS_FMT_YDYUYDYV8_1X16
+      - 0x2014
       -
       -
       -
@@ -4911,10 +5793,6 @@ the following codes.
       -
       -
       -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -4923,6 +5801,14 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
+      - d
+      - d
+      - d
+      - d
+      - d
+      - d
+      - d
+      - d
     * -
       -
       -
@@ -4942,14 +5828,14 @@ the following codes.
       -
       -
       -
-      -
-      -
-      -
-      -
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
       - u\ :sub:`7`
       - u\ :sub:`6`
       - u\ :sub:`5`
@@ -4977,14 +5863,6 @@ the following codes.
       -
       -
       -
-      -
-      -
-      -
-      -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -4993,6 +5871,14 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
+      - d
+      - d
+      - d
+      - d
+      - d
+      - d
+      - d
+      - d
     * -
       -
       -
@@ -5012,14 +5898,14 @@ the following codes.
       -
       -
       -
-      -
-      -
-      -
-      -
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
       - v\ :sub:`7`
       - v\ :sub:`6`
       - v\ :sub:`5`
@@ -5028,18 +5914,10 @@ the following codes.
       - v\ :sub:`2`
       - v\ :sub:`1`
       - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU12-2X12:
+    * .. _MEDIA-BUS-FMT-UYVY10-1X20:
 
-      - MEDIA_BUS_FMT_YVYU12_2X12
-      - 0x201f
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+      - MEDIA_BUS_FMT_UYVY10_1X20
+      - 0x201a
       -
       -
       -
@@ -5053,8 +5931,16 @@ the following codes.
       -
       -
       -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -5080,16 +5966,6 @@ the following codes.
       -
       -
       -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - v\ :sub:`11`
-      - v\ :sub:`10`
       - v\ :sub:`9`
       - v\ :sub:`8`
       - v\ :sub:`7`
@@ -5100,16 +5976,20 @@ the following codes.
       - v\ :sub:`2`
       - v\ :sub:`1`
       - v\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-VYUY10-1X20:
+
+      - MEDIA_BUS_FMT_VYUY10_1X20
+      - 0x201b
       -
       -
       -
@@ -5123,8 +6003,16 @@ the following codes.
       -
       -
       -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -5150,16 +6038,6 @@ the following codes.
       -
       -
       -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`11`
-      - u\ :sub:`10`
       - u\ :sub:`9`
       - u\ :sub:`8`
       - u\ :sub:`7`
@@ -5170,14 +6048,20 @@ the following codes.
       - u\ :sub:`2`
       - u\ :sub:`1`
       - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY8-1X16:
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUYV10-1X20:
 
-      - MEDIA_BUS_FMT_UYVY8_1X16
-      - 0x200f
-      -
-      -
-      -
-      -
+      - MEDIA_BUS_FMT_YUYV10_1X20
+      - 0x200d
       -
       -
       -
@@ -5191,14 +6075,8 @@ the following codes.
       -
       -
       -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -5207,6 +6085,16 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
     * -
       -
       -
@@ -5222,18 +6110,8 @@ the following codes.
       -
       -
       -
-      -
-      -
-      -
-      -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -5242,27 +6120,8 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY8-1X16:
-
-      - MEDIA_BUS_FMT_VYUY8_1X16
-      - 0x2010
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
       - v\ :sub:`7`
       - v\ :sub:`6`
       - v\ :sub:`5`
@@ -5271,20 +6130,10 @@ the following codes.
       - v\ :sub:`2`
       - v\ :sub:`1`
       - v\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
+    * .. _MEDIA-BUS-FMT-YVYU10-1X20:
+
+      - MEDIA_BUS_FMT_YVYU10_1X20
+      - 0x200e
       -
       -
       -
@@ -5298,14 +6147,8 @@ the following codes.
       -
       -
       -
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -5314,13 +6157,17 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV8-1X16:
-
-      - MEDIA_BUS_FMT_YUYV8_1X16
-      - 0x2011
-      -
-      -
-      -
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * -
       -
       -
       -
@@ -5335,6 +6182,8 @@ the following codes.
       -
       -
       -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -5343,6 +6192,8 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
       - u\ :sub:`7`
       - u\ :sub:`6`
       - u\ :sub:`5`
@@ -5351,7 +6202,10 @@ the following codes.
       - u\ :sub:`2`
       - u\ :sub:`1`
       - u\ :sub:`0`
-    * -
+    * .. _MEDIA-BUS-FMT-VUY8-1X24:
+
+      - MEDIA_BUS_FMT_VUY8_1X24
+      - 0x201a
       -
       -
       -
@@ -5361,6 +6215,34 @@ the following codes.
       -
       -
       -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUV8-1X24:
+
+      - MEDIA_BUS_FMT_YUV8_1X24
+      - 0x2025
       -
       -
       -
@@ -5378,6 +6260,14 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
       - v\ :sub:`7`
       - v\ :sub:`6`
       - v\ :sub:`5`
@@ -5386,18 +6276,10 @@ the following codes.
       - v\ :sub:`2`
       - v\ :sub:`1`
       - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU8-1X16:
+    * .. _MEDIA-BUS-FMT-UYYVYY8-0-5X24:
 
-      - MEDIA_BUS_FMT_YVYU8_1X16
-      - 0x2012
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+      - MEDIA_BUS_FMT_UYYVYY8_0_5X24
+      - 0x2026
       -
       -
       -
@@ -5407,6 +6289,22 @@ the following codes.
       -
       -
       -
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -5415,14 +6313,6 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
     * -
       -
       -
@@ -5434,14 +6324,22 @@ the following codes.
       -
       -
       -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -5450,6 +6348,23 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-UYVY12-1X24:
+
+      - MEDIA_BUS_FMT_UYVY12_1X24
+      - 0x2020
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
       - u\ :sub:`7`
       - u\ :sub:`6`
       - u\ :sub:`5`
@@ -5458,10 +6373,20 @@ the following codes.
       - u\ :sub:`2`
       - u\ :sub:`1`
       - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YDYUYDYV8-1X16:
-
-      - MEDIA_BUS_FMT_YDYUYDYV8_1X16
-      - 0x2014
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
+      -
       -
       -
       -
@@ -5471,6 +6396,35 @@ the following codes.
       -
       -
       -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-VYUY12-1X24:
+
+      - MEDIA_BUS_FMT_VYUY12_1X24
+      - 0x2021
+      -
       -
       -
       -
@@ -5479,6 +6433,22 @@ the following codes.
       -
       -
       -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -5487,14 +6457,6 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-      - d
-      - d
-      - d
-      - d
-      - d
-      - d
-      - d
-      - d
     * -
       -
       -
@@ -5506,6 +6468,35 @@ the following codes.
       -
       -
       -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUYV12-1X24:
+
+      - MEDIA_BUS_FMT_YUYV12_1X24
+      - 0x2022
+      -
       -
       -
       -
@@ -5514,6 +6505,10 @@ the following codes.
       -
       -
       -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -5522,6 +6517,10 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
       - u\ :sub:`7`
       - u\ :sub:`6`
       - u\ :sub:`5`
@@ -5541,6 +6540,35 @@ the following codes.
       -
       -
       -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YVYU12-1X24:
+
+      - MEDIA_BUS_FMT_YVYU12_1X24
+      - 0x2023
+      -
       -
       -
       -
@@ -5549,6 +6577,10 @@ the following codes.
       -
       -
       -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -5557,14 +6589,18 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-      - d
-      - d
-      - d
-      - d
-      - d
-      - d
-      - d
-      - d
+      - v\ :sub:`11`
+      - v\ :sub:`10`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
     * -
       -
       -
@@ -5576,14 +6612,39 @@ the following codes.
       -
       -
       -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-YUV10-1X30:
+
+      - MEDIA_BUS_FMT_YUV10_1X30
+      - 0x2016
       -
       -
       -
-      -
-      -
-      -
-      -
-      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -5592,6 +6653,18 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - v\ :sub:`9`
+      - v\ :sub:`8`
       - v\ :sub:`7`
       - v\ :sub:`6`
       - v\ :sub:`5`
@@ -5600,20 +6673,10 @@ the following codes.
       - v\ :sub:`2`
       - v\ :sub:`1`
       - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY10-1X20:
+    * .. _MEDIA-BUS-FMT-UYYVYY10-0-5X30:
 
-      - MEDIA_BUS_FMT_UYVY10_1X20
-      - 0x201a
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+      - MEDIA_BUS_FMT_UYYVYY10_0_5X30
+      - 0x2027
       -
       -
       -
@@ -5637,17 +6700,17 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
     * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
       -
       -
       -
@@ -5672,23 +6735,166 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY10-1X20:
-
-      - MEDIA_BUS_FMT_VYUY10_1X20
-      - 0x201b
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-AYUV8-1X32:
+
+      - MEDIA_BUS_FMT_AYUV8_1X32
+      - 0x2017
+      -
+      - a\ :sub:`7`
+      - a\ :sub:`6`
+      - a\ :sub:`5`
+      - a\ :sub:`4`
+      - a\ :sub:`3`
+      - a\ :sub:`2`
+      - a\ :sub:`1`
+      - a\ :sub:`0`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - v\ :sub:`7`
+      - v\ :sub:`6`
+      - v\ :sub:`5`
+      - v\ :sub:`4`
+      - v\ :sub:`3`
+      - v\ :sub:`2`
+      - v\ :sub:`1`
+      - v\ :sub:`0`
+
+
+.. raw:: latex
+
+	\endgroup
+
+
+The following table list existing packed 36bit wide YUV formats.
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _v4l2-mbus-pixelcode-yuv8-36bit:
+
+.. flat-table:: 36bit YUV Formats
+    :header-rows:  2
+    :stub-columns: 0
+    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+
+    * - Identifier
+      - Code
+      -
+      - :cspan:`35` Data organization
+    * -
+      -
+      - Bit
+      - 35
+      - 34
+      - 33
+      - 32
+      - 31
+      - 30
+      - 29
+      - 28
+      - 27
+      - 26
+      - 25
+      - 24
+      - 23
+      - 22
+      - 21
+      - 10
+      - 19
+      - 18
+      - 17
+      - 16
+      - 15
+      - 14
+      - 13
+      - 12
+      - 11
+      - 10
+      - 9
+      - 8
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-UYYVYY12-0-5X36:
+
+      - MEDIA_BUS_FMT_UYYVYY12_0_5X36
+      - 0x2028
+      -
+      - u\ :sub:`11`
+      - u\ :sub:`10`
+      - u\ :sub:`9`
+      - u\ :sub:`8`
+      - u\ :sub:`7`
+      - u\ :sub:`6`
+      - u\ :sub:`5`
+      - u\ :sub:`4`
+      - u\ :sub:`3`
+      - u\ :sub:`2`
+      - u\ :sub:`1`
+      - u\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
+    * -
       -
       -
+      - v\ :sub:`11`
+      - v\ :sub:`10`
       - v\ :sub:`9`
       - v\ :sub:`8`
       - v\ :sub:`7`
@@ -5699,6 +6905,8 @@ the following codes.
       - v\ :sub:`2`
       - v\ :sub:`1`
       - v\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -5709,31 +6917,8 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -5744,23 +6929,13 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV10-1X20:
+    * .. _MEDIA-BUS-FMT-YUV12-1X36:
 
-      - MEDIA_BUS_FMT_YUYV10_1X20
-      - 0x200d
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+      - MEDIA_BUS_FMT_YUV12_1X36
+      - 0x2029
       -
+      - y\ :sub:`11`
+      - y\ :sub:`10`
       - y\ :sub:`9`
       - y\ :sub:`8`
       - y\ :sub:`7`
@@ -5771,6 +6946,8 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
+      - u\ :sub:`11`
+      - u\ :sub:`10`
       - u\ :sub:`9`
       - u\ :sub:`8`
       - u\ :sub:`7`
@@ -5781,31 +6958,8 @@ the following codes.
       - u\ :sub:`2`
       - u\ :sub:`1`
       - u\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
+      - v\ :sub:`11`
+      - v\ :sub:`10`
       - v\ :sub:`9`
       - v\ :sub:`8`
       - v\ :sub:`7`
@@ -5816,44 +6970,41 @@ the following codes.
       - v\ :sub:`2`
       - v\ :sub:`1`
       - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU10-1X20:
 
-      - MEDIA_BUS_FMT_YVYU10_1X20
-      - 0x200e
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+
+.. raw:: latex
+
+	\endgroup
+
+
+The following table list existing packed 48bit wide YUV formats.
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+
+.. _v4l2-mbus-pixelcode-yuv8-48bit:
+
+.. flat-table:: 48bit YUV Formats
+    :header-rows:  3
+    :stub-columns: 0
+    :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+
+    * - Identifier
+      - Code
       -
+      - :cspan:`31` Data organization
+    * -
       -
+      - Bit
       -
       -
       -
       -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * -
       -
       -
       -
@@ -5866,33 +7017,61 @@ the following codes.
       -
       -
       -
+      - 47
+      - 46
+      - 45
+      - 44
+      - 43
+      - 42
+      - 41
+      - 40
+      - 39
+      - 38
+      - 37
+      - 36
+      - 35
+      - 34
+      - 33
+      - 32
+    * -
       -
       -
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VUY8-1X24:
+      - 31
+      - 30
+      - 29
+      - 28
+      - 27
+      - 26
+      - 25
+      - 24
+      - 23
+      - 22
+      - 21
+      - 10
+      - 19
+      - 18
+      - 17
+      - 16
+      - 15
+      - 14
+      - 13
+      - 12
+      - 11
+      - 10
+      - 9
+      - 8
+      - 7
+      - 6
+      - 5
+      - 4
+      - 3
+      - 2
+      - 1
+      - 0
+    * .. _MEDIA-BUS-FMT-YUV16-1X48:
 
-      - MEDIA_BUS_FMT_VUY8_1X24
-      - 0x201a
-      -
+      - MEDIA_BUS_FMT_YUV16_1X48
+      - 0x202a
       -
       -
       -
@@ -5901,34 +7080,6 @@ the following codes.
       -
       -
       -
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUV8-1X24:
-
-      - MEDIA_BUS_FMT_YUV8_1X24
-      - 0x2025
       -
       -
       -
@@ -5938,6 +7089,14 @@ the following codes.
       -
       -
       -
+      - y\ :sub:`15`
+      - y\ :sub:`14`
+      - y\ :sub:`13`
+      - y\ :sub:`12`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`8`
+      - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
       - y\ :sub:`5`
@@ -5946,35 +7105,13 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-UYVY12-1X24:
-
-      - MEDIA_BUS_FMT_UYVY12_1X24
-      - 0x2020
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+    * -
       -
       -
+      - u\ :sub:`15`
+      - u\ :sub:`14`
+      - u\ :sub:`13`
+      - u\ :sub:`12`
       - u\ :sub:`11`
       - u\ :sub:`10`
       - u\ :sub:`9`
@@ -5987,29 +7124,10 @@ the following codes.
       - u\ :sub:`2`
       - u\ :sub:`1`
       - u\ :sub:`0`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+      - v\ :sub:`15`
+      - v\ :sub:`14`
+      - v\ :sub:`13`
+      - v\ :sub:`12`
       - v\ :sub:`11`
       - v\ :sub:`10`
       - v\ :sub:`9`
@@ -6022,24 +7140,10 @@ the following codes.
       - v\ :sub:`2`
       - v\ :sub:`1`
       - v\ :sub:`0`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-VYUY12-1X24:
+    * .. _MEDIA-BUS-FMT-UYYVYY16-0-5X48:
 
-      - MEDIA_BUS_FMT_VYUY12_1X24
-      - 0x2021
-      -
-      -
+      - MEDIA_BUS_FMT_UYYVYY16_0_5X48
+      - 0x202b
       -
       -
       -
@@ -6047,31 +7151,6 @@ the following codes.
       -
       -
       -
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-    * -
       -
       -
       -
@@ -6082,6 +7161,10 @@ the following codes.
       -
       -
       -
+      - u\ :sub:`15`
+      - u\ :sub:`14`
+      - u\ :sub:`13`
+      - u\ :sub:`12`
       - u\ :sub:`11`
       - u\ :sub:`10`
       - u\ :sub:`9`
@@ -6094,6 +7177,13 @@ the following codes.
       - u\ :sub:`2`
       - u\ :sub:`1`
       - u\ :sub:`0`
+    * -
+      -
+      -
+      - y\ :sub:`15`
+      - y\ :sub:`14`
+      - y\ :sub:`13`
+      - y\ :sub:`12`
       - y\ :sub:`11`
       - y\ :sub:`10`
       - y\ :sub:`9`
@@ -6106,22 +7196,13 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUYV12-1X24:
-
-      - MEDIA_BUS_FMT_YUYV12_1X24
-      - 0x2022
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+      - y\ :sub:`15`
+      - y\ :sub:`14`
+      - y\ :sub:`13`
+      - y\ :sub:`12`
       - y\ :sub:`11`
       - y\ :sub:`10`
-      - y\ :sub:`9`
+      - y\ :sub:`8`
       - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
@@ -6131,18 +7212,6 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
     * -
       -
       -
@@ -6154,35 +7223,6 @@ the following codes.
       -
       -
       -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - v\ :sub:`11`
-      - v\ :sub:`10`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YVYU12-1X24:
-
-      - MEDIA_BUS_FMT_YVYU12_1X24
-      - 0x2023
-      -
       -
       -
       -
@@ -6191,18 +7231,10 @@ the following codes.
       -
       -
       -
-      - y\ :sub:`11`
-      - y\ :sub:`10`
-      - y\ :sub:`9`
-      - y\ :sub:`8`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
+      - v\ :sub:`15`
+      - v\ :sub:`14`
+      - v\ :sub:`13`
+      - v\ :sub:`12`
       - v\ :sub:`11`
       - v\ :sub:`10`
       - v\ :sub:`9`
@@ -6218,14 +7250,10 @@ the following codes.
     * -
       -
       -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
-      -
+      - y\ :sub:`15`
+      - y\ :sub:`14`
+      - y\ :sub:`13`
+      - y\ :sub:`12`
       - y\ :sub:`11`
       - y\ :sub:`10`
       - y\ :sub:`9`
@@ -6238,26 +7266,13 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-      - u\ :sub:`11`
-      - u\ :sub:`10`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-YUV10-1X30:
-
-      - MEDIA_BUS_FMT_YUV10_1X30
-      - 0x2016
-      -
-      -
-      -
-      - y\ :sub:`9`
+      - y\ :sub:`15`
+      - y\ :sub:`14`
+      - y\ :sub:`13`
+      - y\ :sub:`12`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`8`
       - y\ :sub:`8`
       - y\ :sub:`7`
       - y\ :sub:`6`
@@ -6267,63 +7282,6 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
-      - u\ :sub:`9`
-      - u\ :sub:`8`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - v\ :sub:`9`
-      - v\ :sub:`8`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
-    * .. _MEDIA-BUS-FMT-AYUV8-1X32:
-
-      - MEDIA_BUS_FMT_AYUV8_1X32
-      - 0x2017
-      -
-      - a\ :sub:`7`
-      - a\ :sub:`6`
-      - a\ :sub:`5`
-      - a\ :sub:`4`
-      - a\ :sub:`3`
-      - a\ :sub:`2`
-      - a\ :sub:`1`
-      - a\ :sub:`0`
-      - y\ :sub:`7`
-      - y\ :sub:`6`
-      - y\ :sub:`5`
-      - y\ :sub:`4`
-      - y\ :sub:`3`
-      - y\ :sub:`2`
-      - y\ :sub:`1`
-      - y\ :sub:`0`
-      - u\ :sub:`7`
-      - u\ :sub:`6`
-      - u\ :sub:`5`
-      - u\ :sub:`4`
-      - u\ :sub:`3`
-      - u\ :sub:`2`
-      - u\ :sub:`1`
-      - u\ :sub:`0`
-      - v\ :sub:`7`
-      - v\ :sub:`6`
-      - v\ :sub:`5`
-      - v\ :sub:`4`
-      - v\ :sub:`3`
-      - v\ :sub:`2`
-      - v\ :sub:`1`
-      - v\ :sub:`0`
 
 
 .. raw:: latex

Documentation/virtual/kvm/api.txt

@@ -3377,6 +3377,69 @@ struct kvm_ppc_resize_hpt {
 	__u32 pad;
 };
 
+4.104 KVM_X86_GET_MCE_CAP_SUPPORTED
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: system ioctl
+Parameters: u64 mce_cap (out)
+Returns: 0 on success, -1 on error
+
+Returns supported MCE capabilities. The u64 mce_cap parameter
+has the same format as the MSR_IA32_MCG_CAP register. Supported
+capabilities will have the corresponding bits set.
+
+4.105 KVM_X86_SETUP_MCE
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: u64 mcg_cap (in)
+Returns: 0 on success,
+         -EFAULT if u64 mcg_cap cannot be read,
+         -EINVAL if the requested number of banks is invalid,
+         -EINVAL if requested MCE capability is not supported.
+
+Initializes MCE support for use. The u64 mcg_cap parameter
+has the same format as the MSR_IA32_MCG_CAP register and
+specifies which capabilities should be enabled. The maximum
+supported number of error-reporting banks can be retrieved when
+checking for KVM_CAP_MCE. The supported capabilities can be
+retrieved with KVM_X86_GET_MCE_CAP_SUPPORTED.
+
+4.106 KVM_X86_SET_MCE
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_x86_mce (in)
+Returns: 0 on success,
+         -EFAULT if struct kvm_x86_mce cannot be read,
+         -EINVAL if the bank number is invalid,
+         -EINVAL if VAL bit is not set in status field.
+
+Inject a machine check error (MCE) into the guest. The input
+parameter is:
+
+struct kvm_x86_mce {
+	__u64 status;
+	__u64 addr;
+	__u64 misc;
+	__u64 mcg_status;
+	__u8 bank;
+	__u8 pad1[7];
+	__u64 pad2[3];
+};
+
+If the MCE being reported is an uncorrected error, KVM will
+inject it as an MCE exception into the guest. If the guest
+MCG_STATUS register reports that an MCE is in progress, KVM
+causes an KVM_EXIT_SHUTDOWN vmexit.
+
+Otherwise, if the MCE is a corrected error, KVM will just
+store it in the corresponding bank (provided this bank is
+not holding a previously reported uncorrected error).
+
 5. The kvm_run structure
 ------------------------
 

MAINTAINERS

@@ -4782,6 +4782,12 @@ L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/mpc85xx_edac.[ch]
 
+EDAC-PND2
+M:	Tony Luck <tony.luck@intel.com>
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	drivers/edac/pnd2_edac.[ch]
+
 EDAC-PASEMI
 M:	Egor Martovetsky <egor@pasemi.com>
 L:	linux-edac@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

arch/arc/boot/dts/skeleton.dtsi

@@ -26,6 +26,7 @@
 			device_type = "cpu";
 			compatible = "snps,arc770d";
 			reg = <0>;
+			clocks = <&core_clk>;
 		};
 	};
 

arch/arc/boot/dts/skeleton_hs.dtsi

@@ -21,6 +21,7 @@
 			device_type = "cpu";
 			compatible = "snps,archs38";
 			reg = <0>;
+			clocks = <&core_clk>;
 		};
 	};
 

arch/arc/boot/dts/skeleton_hs_idu.dtsi

@@ -19,8 +19,27 @@
 
 		cpu@0 {
 			device_type = "cpu";
-			compatible = "snps,archs38xN";
+			compatible = "snps,archs38";
 			reg = <0>;
+			clocks = <&core_clk>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <1>;
+			clocks = <&core_clk>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <2>;
+			clocks = <&core_clk>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <3>;
+			clocks = <&core_clk>;
 		};
 	};
 

arch/arc/boot/dts/vdk_axs10x_mb.dtsi

@@ -112,13 +112,19 @@
 			interrupts = <7>;
 			bus-width = <4>;
 		};
+	};
 
-		/* Embedded Vision subsystem UIO mappings; only relevant for EV VDK */
-		uio_ev: uio@0xD0000000 {
-			compatible = "generic-uio";
-			reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
-			reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
-			interrupts = <23>;
-		};
+	/*
+	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
+	 *
+	 * This node is intentionally put outside of MB above becase
+	 * it maps areas outside of MB's 0xEz-0xFz.
+	 */
+	uio_ev: uio@0xD0000000 {
+		compatible = "generic-uio";
+		reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
+		reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
+		interrupt-parent = <&mb_intc>;
+		interrupts = <23>;
 	};
 };

arch/arc/include/asm/kprobes.h

@@ -54,9 +54,7 @@ int kprobe_fault_handler(struct pt_regs *regs, unsigned long cause);
 void kretprobe_trampoline(void);
 void trap_is_kprobe(unsigned long address, struct pt_regs *regs);
 #else
-static void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
-{
-}
+#define trap_is_kprobe(address, regs)
 #endif /* CONFIG_KPROBES */
 
 #endif /* _ARC_KPROBES_H */

arch/arc/kernel/entry-arcv2.S

@@ -100,15 +100,21 @@ END(handle_interrupt)
 ;################### Non TLB Exception Handling #############################
 
 ENTRY(EV_SWI)
-	flag 1
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
 END(EV_SWI)
 
 ENTRY(EV_DivZero)
-	flag 1
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
 END(EV_DivZero)
 
 ENTRY(EV_DCError)
-	flag 1
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
 END(EV_DCError)
 
 ; ---------------------------------------------

arch/arc/kernel/setup.c

@@ -10,6 +10,7 @@
 #include <linux/fs.h>
 #include <linux/delay.h>
 #include <linux/root_dev.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/console.h>
@@ -488,8 +489,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	char *str;
 	int cpu_id = ptr_to_cpu(v);
-	struct device_node *core_clk = of_find_node_by_name(NULL, "core_clk");
-	u32 freq = 0;
+	struct device *cpu_dev = get_cpu_device(cpu_id);
+	struct clk *cpu_clk;
+	unsigned long freq = 0;
 
 	if (!cpu_online(cpu_id)) {
 		seq_printf(m, "processor [%d]\t: Offline\n", cpu_id);
@@ -502,9 +504,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE));
 
-	of_property_read_u32(core_clk, "clock-frequency", &freq);
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk)) {
+		seq_printf(m, "CPU speed \t: Cannot get clock for processor [%d]\n",
+			   cpu_id);
+	} else {
+		freq = clk_get_rate(cpu_clk);
+	}
 	if (freq)
-		seq_printf(m, "CPU speed\t: %u.%02u Mhz\n",
+		seq_printf(m, "CPU speed\t: %lu.%02lu Mhz\n",
 			   freq / 1000000, (freq / 10000) % 100);
 
 	seq_printf(m, "Bogo MIPS\t: %lu.%02lu\n",

arch/arc/mm/cache.c

@@ -633,6 +633,9 @@ noinline static void slc_entire_op(const int op)
 
 	write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
 
+	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
+	read_aux_reg(r);
+
 	/* Important to wait for flush to complete */
 	while (read_aux_reg(r) & SLC_CTRL_BUSY);
 }

arch/arm/boot/dts/sun8i-a33.dtsi

@@ -113,8 +113,8 @@
 		simple-audio-card,mclk-fs = <512>;
 		simple-audio-card,aux-devs = <&codec_analog>;
 		simple-audio-card,routing =
-			"Left DAC", "Digital Left DAC",
-			"Right DAC", "Digital Right DAC";
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right";
 		status = "disabled";
 
 		simple-audio-card,cpu {

arch/arm64/include/asm/current.h

@@ -3,8 +3,6 @@
 
 #include <linux/compiler.h>
 
-#include <asm/sysreg.h>
-
 #ifndef __ASSEMBLY__
 
 struct task_struct;

arch/arm64/kernel/smp.c

@@ -944,7 +944,7 @@ static bool have_cpu_die(void)
 #ifdef CONFIG_HOTPLUG_CPU
 	int any_cpu = raw_smp_processor_id();
 
-	if (cpu_ops[any_cpu]->cpu_die)
+	if (cpu_ops[any_cpu] && cpu_ops[any_cpu]->cpu_die)
 		return true;
 #endif
 	return false;

arch/arm64/kernel/vdso/.gitignore

@@ -1,2 +1 @@
 vdso.lds
-vdso-offsets.h

arch/c6x/kernel/ptrace.c

@@ -70,46 +70,6 @@ static int gpr_get(struct task_struct *target,
 				   0, sizeof(*regs));
 }
 
-static int gpr_set(struct task_struct *target,
-		   const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-	struct pt_regs *regs = task_pt_regs(target);
-
-	/* Don't copyin TSR or CSR */
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs,
-				 0, PT_TSR * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-					PT_TSR * sizeof(long),
-					(PT_TSR + 1) * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs,
-				 (PT_TSR + 1) * sizeof(long),
-				 PT_CSR * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-					PT_CSR * sizeof(long),
-					(PT_CSR + 1) * sizeof(long));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &regs,
-				 (PT_CSR + 1) * sizeof(long), -1);
-	return ret;
-}
-
 enum c6x_regset {
 	REGSET_GPR,
 };
@@ -121,7 +81,6 @@ static const struct user_regset c6x_regsets[] = {
 		.size = sizeof(u32),
 		.align = sizeof(u32),
 		.get = gpr_get,
-		.set = gpr_set
 	},
 };
 

arch/h8300/kernel/ptrace.c

@@ -95,7 +95,8 @@ static int regs_get(struct task_struct *target,
 	long *reg = (long *)&regs;
 
 	/* build user regs in buffer */
-	for (r = 0; r < ARRAY_SIZE(register_offset); r++)
+	BUILD_BUG_ON(sizeof(regs) % sizeof(long) != 0);
+	for (r = 0; r < sizeof(regs) / sizeof(long); r++)
 		*reg++ = h8300_get_reg(target, r);
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
@@ -113,7 +114,8 @@ static int regs_set(struct task_struct *target,
 	long *reg;
 
 	/* build user regs in buffer */
-	for (reg = (long *)&regs, r = 0; r < ARRAY_SIZE(register_offset); r++)
+	BUILD_BUG_ON(sizeof(regs) % sizeof(long) != 0);
+	for (reg = (long *)&regs, r = 0; r < sizeof(regs) / sizeof(long); r++)
 		*reg++ = h8300_get_reg(target, r);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
@@ -122,7 +124,7 @@ static int regs_set(struct task_struct *target,
 		return ret;
 
 	/* write back to pt_regs */
-	for (reg = (long *)&regs, r = 0; r < ARRAY_SIZE(register_offset); r++)
+	for (reg = (long *)&regs, r = 0; r < sizeof(regs) / sizeof(long); r++)
 		h8300_put_reg(target, r, *reg++);
 	return 0;
 }

arch/m68k/configs/amiga_defconfig

@@ -25,6 +25,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -60,6 +61,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -71,6 +73,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -101,6 +104,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -298,6 +302,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -371,6 +377,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -383,6 +390,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_A2065=y
 CONFIG_ARIADNE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -404,7 +412,6 @@ CONFIG_ZORRO8390=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -564,6 +571,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -594,6 +603,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -605,6 +615,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -629,4 +640,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/apollo_defconfig

@@ -26,6 +26,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -58,6 +59,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -69,6 +71,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -99,6 +102,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -296,6 +300,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -353,6 +359,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -362,6 +369,7 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -378,7 +386,6 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -523,6 +530,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -553,6 +562,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -564,6 +574,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -588,4 +599,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/atari_defconfig

@@ -25,6 +25,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -58,6 +59,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -69,6 +71,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -99,6 +102,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -296,6 +300,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -362,6 +368,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -372,6 +379,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_ATARILANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -389,7 +397,6 @@ CONFIG_NE2000=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 CONFIG_SMC91X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -544,6 +551,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -574,6 +583,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -585,6 +595,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -609,4 +620,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/bvme6000_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
@@ -56,6 +57,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -67,6 +69,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -97,6 +100,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -294,6 +298,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -352,6 +358,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -361,6 +368,7 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -377,7 +385,6 @@ CONFIG_BVME6000_NET=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -515,6 +522,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -545,6 +554,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -556,6 +566,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -580,4 +591,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/hp300_defconfig

@@ -26,6 +26,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -58,6 +59,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -69,6 +71,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -99,6 +102,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -296,6 +300,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -353,6 +359,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -363,6 +370,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_HPLANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -379,7 +387,6 @@ CONFIG_HPLANCE=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -525,6 +532,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -555,6 +564,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -566,6 +576,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -590,4 +601,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mac_defconfig

@@ -25,6 +25,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -57,6 +58,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -68,6 +70,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -98,6 +101,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -298,6 +302,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -369,6 +375,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -379,6 +386,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -398,7 +406,6 @@ CONFIG_MAC8390=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -547,6 +554,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -577,6 +586,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -588,6 +598,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -612,4 +623,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/multi_defconfig

@@ -21,6 +21,7 @@ CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -67,6 +68,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -78,6 +80,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -108,6 +111,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -308,6 +312,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -402,6 +408,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -419,6 +426,7 @@ CONFIG_HPLANCE=y
 CONFIG_MVME147_NET=y
 CONFIG_SUN3LANCE=y
 CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -444,7 +452,6 @@ CONFIG_ZORRO8390=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 CONFIG_SMC91X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PLIP=m
@@ -627,6 +634,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -657,6 +666,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -668,6 +678,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -692,4 +703,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mvme147_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68030=y
@@ -55,6 +56,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -66,6 +68,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -96,6 +99,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -293,6 +297,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -351,6 +357,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -361,6 +368,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_MVME147_NET=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -377,7 +385,6 @@ CONFIG_MVME147_NET=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -515,6 +522,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -545,6 +554,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -556,6 +566,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -580,4 +591,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mvme16x_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
@@ -56,6 +57,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -67,6 +69,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -97,6 +100,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -294,6 +298,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -352,6 +358,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -361,6 +368,7 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -377,7 +385,6 @@ CONFIG_MVME16x_NET=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -515,6 +522,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -545,6 +554,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -556,6 +566,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -580,4 +591,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/q40_defconfig

@@ -26,6 +26,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
@@ -56,6 +57,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -67,6 +69,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -97,6 +100,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -294,6 +298,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -358,6 +364,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -369,6 +376,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 # CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -388,7 +396,6 @@ CONFIG_NE2000=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PLIP=m
@@ -538,6 +545,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -568,6 +577,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -579,6 +589,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -603,4 +614,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/sun3_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_SUN3=y
@@ -53,6 +54,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -64,6 +66,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -94,6 +97,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -291,6 +295,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -349,6 +355,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -359,6 +366,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_SUN3LANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_EZCHIP is not set
@@ -375,7 +383,6 @@ CONFIG_SUN3_82586=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -517,6 +524,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -546,6 +555,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -557,6 +567,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -581,4 +592,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/sun3x_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_SUN3X=y
@@ -53,6 +54,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -64,6 +66,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -94,6 +97,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -291,6 +295,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -349,6 +355,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -359,6 +366,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_SUN3LANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -375,7 +383,6 @@ CONFIG_SUN3LANCE=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -517,6 +524,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -547,6 +556,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -558,6 +568,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -582,4 +593,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/include/asm/bitops.h

@@ -148,7 +148,7 @@ static inline void bfchg_mem_change_bit(int nr, volatile unsigned long *vaddr)
 #define __change_bit(nr, vaddr)	change_bit(nr, vaddr)
 
 
-static inline int test_bit(int nr, const unsigned long *vaddr)
+static inline int test_bit(int nr, const volatile unsigned long *vaddr)
 {
 	return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
 }

arch/m68k/include/asm/unistd.h

@@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		379
+#define NR_syscalls		380
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT

arch/m68k/include/uapi/asm/unistd.h

@@ -384,5 +384,6 @@
 #define __NR_copy_file_range	376
 #define __NR_preadv2		377
 #define __NR_pwritev2		378
+#define __NR_statx		379
 
 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */

arch/m68k/kernel/syscalltable.S

@@ -399,3 +399,4 @@ ENTRY(sys_call_table)
 	.long sys_copy_file_range
 	.long sys_preadv2
 	.long sys_pwritev2
+	.long sys_statx

arch/metag/kernel/ptrace.c

@@ -26,6 +26,16 @@
  * user_regset definitions.
  */
 
+static unsigned long user_txstatus(const struct pt_regs *regs)
+{
+	unsigned long data = (unsigned long)regs->ctx.Flags;
+
+	if (regs->ctx.SaveMask & TBICTX_CBUF_BIT)
+		data |= USER_GP_REGS_STATUS_CATCH_BIT;
+
+	return data;
+}
+
 int metag_gp_regs_copyout(const struct pt_regs *regs,
 			  unsigned int pos, unsigned int count,
 			  void *kbuf, void __user *ubuf)
@@ -64,9 +74,7 @@ int metag_gp_regs_copyout(const struct pt_regs *regs,
 	if (ret)
 		goto out;
 	/* TXSTATUS */
-	data = (unsigned long)regs->ctx.Flags;
-	if (regs->ctx.SaveMask & TBICTX_CBUF_BIT)
-		data |= USER_GP_REGS_STATUS_CATCH_BIT;
+	data = user_txstatus(regs);
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  &data, 4*25, 4*26);
 	if (ret)
@@ -121,6 +129,7 @@ int metag_gp_regs_copyin(struct pt_regs *regs,
 	if (ret)
 		goto out;
 	/* TXSTATUS */
+	data = user_txstatus(regs);
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &data, 4*25, 4*26);
 	if (ret)
@@ -246,6 +255,8 @@ int metag_rp_state_copyin(struct pt_regs *regs,
 	unsigned long long *ptr;
 	int ret, i;
 
+	if (count < 4*13)
+		return -EINVAL;
 	/* Read the entire pipeline before making any changes */
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &rp, 0, 4*13);
@@ -305,7 +316,7 @@ static int metag_tls_set(struct task_struct *target,
 			const void *kbuf, const void __user *ubuf)
 {
 	int ret;
-	void __user *tls;
+	void __user *tls = target->thread.tls_ptr;
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &tls, 0, -1);
 	if (ret)

arch/mips/kernel/ptrace.c

@@ -456,7 +456,8 @@ static int fpr_set(struct task_struct *target,
 					  &target->thread.fpu,
 					  0, sizeof(elf_fpregset_t));
 
-	for (i = 0; i < NUM_FPU_REGS; i++) {
+	BUILD_BUG_ON(sizeof(fpr_val) != sizeof(elf_fpreg_t));
+	for (i = 0; i < NUM_FPU_REGS && count >= sizeof(elf_fpreg_t); i++) {
 		err = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 					 &fpr_val, i * sizeof(elf_fpreg_t),
 					 (i + 1) * sizeof(elf_fpreg_t));

arch/parisc/include/asm/uaccess.h

@@ -64,6 +64,15 @@ struct exception_table_entry {
 	".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \
 	".previous\n"
 
+/*
+ * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
+ * (with lowest bit set) for which the fault handler in fixup_exception() will
+ * load -EFAULT into %r8 for a read or write fault, and zeroes the target
+ * register in case of a read fault in get_user().
+ */
+#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr )\
+	ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1)
+
 /*
  * The page fault handler stores, in a per-cpu area, the following information
  * if a fixup routine is available.
@@ -91,7 +100,7 @@ struct exception_data {
 #define __get_user(x, ptr)                               \
 ({                                                       \
 	register long __gu_err __asm__ ("r8") = 0;       \
-	register long __gu_val __asm__ ("r9") = 0;       \
+	register long __gu_val;				 \
 							 \
 	load_sr2();					 \
 	switch (sizeof(*(ptr))) {			 \
@@ -107,22 +116,23 @@ struct exception_data {
 })
 
 #define __get_user_asm(ldx, ptr)                        \
-	__asm__("\n1:\t" ldx "\t0(%%sr2,%2),%0\n\t"	\
-		ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_get_user_skip_1)\
+	__asm__("1: " ldx " 0(%%sr2,%2),%0\n"		\
+		"9:\n"					\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
 		: "=r"(__gu_val), "=r"(__gu_err)        \
-		: "r"(ptr), "1"(__gu_err)		\
-		: "r1");
+		: "r"(ptr), "1"(__gu_err));
 
 #if !defined(CONFIG_64BIT)
 
 #define __get_user_asm64(ptr) 				\
-	__asm__("\n1:\tldw 0(%%sr2,%2),%0"		\
-		"\n2:\tldw 4(%%sr2,%2),%R0\n\t"		\
-		ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_get_user_skip_2)\
-		ASM_EXCEPTIONTABLE_ENTRY(2b, fixup_get_user_skip_1)\
+	__asm__("   copy %%r0,%R0\n"			\
+		"1: ldw 0(%%sr2,%2),%0\n"		\
+		"2: ldw 4(%%sr2,%2),%R0\n"		\
+		"9:\n"					\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)	\
 		: "=r"(__gu_val), "=r"(__gu_err)	\
-		: "r"(ptr), "1"(__gu_err)		\
-		: "r1");
+		: "r"(ptr), "1"(__gu_err));
 
 #endif /* !defined(CONFIG_64BIT) */
 
@@ -148,32 +158,31 @@ struct exception_data {
  * The "__put_user/kernel_asm()" macros tell gcc they read from memory
  * instead of writing. This is because they do not write to any memory
  * gcc knows about, so there are no aliasing issues. These macros must
- * also be aware that "fixup_put_user_skip_[12]" are executed in the
- * context of the fault, and any registers used there must be listed
- * as clobbers. In this case only "r1" is used by the current routines.
- * r8/r9 are already listed as err/val.
+ * also be aware that fixups are executed in the context of the fault,
+ * and any registers used there must be listed as clobbers.
+ * r8 is already listed as err.
  */
 
 #define __put_user_asm(stx, x, ptr)                         \
 	__asm__ __volatile__ (                              \
-		"\n1:\t" stx "\t%2,0(%%sr2,%1)\n\t"	    \
-		ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_put_user_skip_1)\
+		"1: " stx " %2,0(%%sr2,%1)\n"		    \
+		"9:\n"					    \
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	    \
 		: "=r"(__pu_err)                            \
-		: "r"(ptr), "r"(x), "0"(__pu_err)	    \
-		: "r1")
+		: "r"(ptr), "r"(x), "0"(__pu_err))
 
 
 #if !defined(CONFIG_64BIT)
 
 #define __put_user_asm64(__val, ptr) do {	    	    \
 	__asm__ __volatile__ (				    \
-		"\n1:\tstw %2,0(%%sr2,%1)"		    \
-		"\n2:\tstw %R2,4(%%sr2,%1)\n\t"		    \
-		ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_put_user_skip_2)\
-		ASM_EXCEPTIONTABLE_ENTRY(2b, fixup_put_user_skip_1)\
+		"1: stw %2,0(%%sr2,%1)\n"		    \
+		"2: stw %R2,4(%%sr2,%1)\n"		    \
+		"9:\n"					    \
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	    \
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)	    \
 		: "=r"(__pu_err)                            \
-		: "r"(ptr), "r"(__val), "0"(__pu_err) \
-		: "r1");				    \
+		: "r"(ptr), "r"(__val), "0"(__pu_err));	    \
 } while (0)
 
 #endif /* !defined(CONFIG_64BIT) */

arch/parisc/kernel/parisc_ksyms.c

@@ -47,16 +47,6 @@ EXPORT_SYMBOL(__cmpxchg_u64);
 EXPORT_SYMBOL(lclear_user);
 EXPORT_SYMBOL(lstrnlen_user);
 
-/* Global fixups - defined as int to avoid creation of function pointers */
-extern int fixup_get_user_skip_1;
-extern int fixup_get_user_skip_2;
-extern int fixup_put_user_skip_1;
-extern int fixup_put_user_skip_2;
-EXPORT_SYMBOL(fixup_get_user_skip_1);
-EXPORT_SYMBOL(fixup_get_user_skip_2);
-EXPORT_SYMBOL(fixup_put_user_skip_1);
-EXPORT_SYMBOL(fixup_put_user_skip_2);
-
 #ifndef CONFIG_64BIT
 /* Needed so insmod can set dp value */
 extern int $global$;

arch/parisc/kernel/process.c

@@ -143,6 +143,8 @@ void machine_power_off(void)
 	printk(KERN_EMERG "System shut down completed.\n"
 	       "Please power this system off now.");
 
+	/* prevent soft lockup/stalled CPU messages for endless loop. */
+	rcu_sysrq_start();
 	for (;;);
 }
 

arch/parisc/lib/Makefile

@@ -2,7 +2,7 @@
 # Makefile for parisc-specific library files
 #
 
-lib-y	:= lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o \
+lib-y	:= lusercopy.o bitops.o checksum.o io.o memset.o memcpy.o \
 	   ucmpdi2.o delay.o
 
 obj-y	:= iomap.o

arch/parisc/lib/fixup.S

@@ -1,98 +0,0 @@
-/*
- * Linux/PA-RISC Project (http://www.parisc-linux.org/)
- *
- *  Copyright (C) 2004  Randolph Chung <tausq@debian.org>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2, or (at your option)
- *    any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * 
- * Fixup routines for kernel exception handling.
- */
-#include <asm/asm-offsets.h>
-#include <asm/assembly.h>
-#include <asm/errno.h>
-#include <linux/linkage.h>
-
-#ifdef CONFIG_SMP
-	.macro  get_fault_ip t1 t2
-	loadgp
-	addil LT%__per_cpu_offset,%r27
-	LDREG RT%__per_cpu_offset(%r1),\t1
-	/* t2 = smp_processor_id() */
-	mfctl 30,\t2
-	ldw TI_CPU(\t2),\t2
-#ifdef CONFIG_64BIT
-	extrd,u \t2,63,32,\t2
-#endif
-	/* t2 = &__per_cpu_offset[smp_processor_id()]; */
-	LDREGX \t2(\t1),\t2 
-	addil LT%exception_data,%r27
-	LDREG RT%exception_data(%r1),\t1
-	/* t1 = this_cpu_ptr(&exception_data) */
-	add,l \t1,\t2,\t1
-	/* %r27 = t1->fault_gp - restore gp */
-	LDREG EXCDATA_GP(\t1), %r27
-	/* t1 = t1->fault_ip */
-	LDREG EXCDATA_IP(\t1), \t1
-	.endm
-#else
-	.macro  get_fault_ip t1 t2
-	loadgp
-	/* t1 = this_cpu_ptr(&exception_data) */
-	addil LT%exception_data,%r27
-	LDREG RT%exception_data(%r1),\t2
-	/* %r27 = t2->fault_gp - restore gp */
-	LDREG EXCDATA_GP(\t2), %r27
-	/* t1 = t2->fault_ip */
-	LDREG EXCDATA_IP(\t2), \t1
-	.endm
-#endif
-
-	.level LEVEL
-
-	.text
-	.section .fixup, "ax"
-
-	/* get_user() fixups, store -EFAULT in r8, and 0 in r9 */
-ENTRY_CFI(fixup_get_user_skip_1)
-	get_fault_ip %r1,%r8
-	ldo 4(%r1), %r1
-	ldi -EFAULT, %r8
-	bv %r0(%r1)
-	copy %r0, %r9
-ENDPROC_CFI(fixup_get_user_skip_1)
-
-ENTRY_CFI(fixup_get_user_skip_2)
-	get_fault_ip %r1,%r8
-	ldo 8(%r1), %r1
-	ldi -EFAULT, %r8
-	bv %r0(%r1)
-	copy %r0, %r9
-ENDPROC_CFI(fixup_get_user_skip_2)
-
-	/* put_user() fixups, store -EFAULT in r8 */
-ENTRY_CFI(fixup_put_user_skip_1)
-	get_fault_ip %r1,%r8
-	ldo 4(%r1), %r1
-	bv %r0(%r1)
-	ldi -EFAULT, %r8
-ENDPROC_CFI(fixup_put_user_skip_1)
-
-ENTRY_CFI(fixup_put_user_skip_2)
-	get_fault_ip %r1,%r8
-	ldo 8(%r1), %r1
-	bv %r0(%r1)
-	ldi -EFAULT, %r8
-ENDPROC_CFI(fixup_put_user_skip_2)
-

arch/parisc/lib/lusercopy.S

@@ -5,6 +5,8 @@
  *    Copyright (C) 2000 Richard Hirst <rhirst with parisc-linux.org>
  *    Copyright (C) 2001 Matthieu Delahaye <delahaym at esiee.fr>
  *    Copyright (C) 2003 Randolph Chung <tausq with parisc-linux.org>
+ *    Copyright (C) 2017 Helge Deller <deller@gmx.de>
+ *    Copyright (C) 2017 John David Anglin <dave.anglin@bell.net>
  *
  *
  *    This program is free software; you can redistribute it and/or modify
@@ -132,4 +134,320 @@ ENDPROC_CFI(lstrnlen_user)
 
 	.procend
 
+
+
+/*
+ * unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
+ *
+ * Inputs:
+ * - sr1 already contains space of source region
+ * - sr2 already contains space of destination region
+ *
+ * Returns:
+ * - number of bytes that could not be copied.
+ *   On success, this will be zero.
+ *
+ * This code is based on a C-implementation of a copy routine written by
+ * Randolph Chung, which in turn was derived from the glibc.
+ *
+ * Several strategies are tried to try to get the best performance for various
+ * conditions. In the optimal case, we copy by loops that copy 32- or 16-bytes
+ * at a time using general registers.  Unaligned copies are handled either by
+ * aligning the destination and then using shift-and-write method, or in a few
+ * cases by falling back to a byte-at-a-time copy.
+ *
+ * Testing with various alignments and buffer sizes shows that this code is
+ * often >10x faster than a simple byte-at-a-time copy, even for strangely
+ * aligned operands. It is interesting to note that the glibc version of memcpy
+ * (written in C) is actually quite fast already. This routine is able to beat
+ * it by 30-40% for aligned copies because of the loop unrolling, but in some
+ * cases the glibc version is still slightly faster. This lends more
+ * credibility that gcc can generate very good code as long as we are careful.
+ *
+ * Possible optimizations:
+ * - add cache prefetching
+ * - try not to use the post-increment address modifiers; they may create
+ *   additional interlocks. Assumption is that those were only efficient on old
+ *   machines (pre PA8000 processors)
+ */
+
+	dst = arg0
+	src = arg1
+	len = arg2
+	end = arg3
+	t1  = r19
+	t2  = r20
+	t3  = r21
+	t4  = r22
+	srcspc = sr1
+	dstspc = sr2
+
+	t0 = r1
+	a1 = t1
+	a2 = t2
+	a3 = t3
+	a0 = t4
+
+	save_src = ret0
+	save_dst = ret1
+	save_len = r31
+
+ENTRY_CFI(pa_memcpy)
+	.proc
+	.callinfo NO_CALLS
+	.entry
+
+	/* Last destination address */
+	add	dst,len,end
+
+	/* short copy with less than 16 bytes? */
+	cmpib,>>=,n 15,len,.Lbyte_loop
+
+	/* same alignment? */
+	xor	src,dst,t0
+	extru	t0,31,2,t1
+	cmpib,<>,n  0,t1,.Lunaligned_copy
+
+#ifdef CONFIG_64BIT
+	/* only do 64-bit copies if we can get aligned. */
+	extru	t0,31,3,t1
+	cmpib,<>,n  0,t1,.Lalign_loop32
+
+	/* loop until we are 64-bit aligned */
+.Lalign_loop64:
+	extru	dst,31,3,t1
+	cmpib,=,n	0,t1,.Lcopy_loop_16
+20:	ldb,ma	1(srcspc,src),t1
+21:	stb,ma	t1,1(dstspc,dst)
+	b	.Lalign_loop64
+	ldo	-1(len),len
+
+	ASM_EXCEPTIONTABLE_ENTRY(20b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(21b,.Lcopy_done)
+
+	ldi	31,t0
+.Lcopy_loop_16:
+	cmpb,COND(>>=),n t0,len,.Lword_loop
+
+10:	ldd	0(srcspc,src),t1
+11:	ldd	8(srcspc,src),t2
+	ldo	16(src),src
+12:	std,ma	t1,8(dstspc,dst)
+13:	std,ma	t2,8(dstspc,dst)
+14:	ldd	0(srcspc,src),t1
+15:	ldd	8(srcspc,src),t2
+	ldo	16(src),src
+16:	std,ma	t1,8(dstspc,dst)
+17:	std,ma	t2,8(dstspc,dst)
+
+	ASM_EXCEPTIONTABLE_ENTRY(10b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(11b,.Lcopy16_fault)
+	ASM_EXCEPTIONTABLE_ENTRY(12b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(13b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(14b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(15b,.Lcopy16_fault)
+	ASM_EXCEPTIONTABLE_ENTRY(16b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(17b,.Lcopy_done)
+
+	b	.Lcopy_loop_16
+	ldo	-32(len),len
+
+.Lword_loop:
+	cmpib,COND(>>=),n 3,len,.Lbyte_loop
+20:	ldw,ma	4(srcspc,src),t1
+21:	stw,ma	t1,4(dstspc,dst)
+	b	.Lword_loop
+	ldo	-4(len),len
+
+	ASM_EXCEPTIONTABLE_ENTRY(20b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(21b,.Lcopy_done)
+
+#endif /* CONFIG_64BIT */
+
+	/* loop until we are 32-bit aligned */
+.Lalign_loop32:
+	extru	dst,31,2,t1
+	cmpib,=,n	0,t1,.Lcopy_loop_4
+20:	ldb,ma	1(srcspc,src),t1
+21:	stb,ma	t1,1(dstspc,dst)
+	b	.Lalign_loop32
+	ldo	-1(len),len
+
+	ASM_EXCEPTIONTABLE_ENTRY(20b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(21b,.Lcopy_done)
+
+
+.Lcopy_loop_4:
+	cmpib,COND(>>=),n 15,len,.Lbyte_loop
+
+10:	ldw	0(srcspc,src),t1
+11:	ldw	4(srcspc,src),t2
+12:	stw,ma	t1,4(dstspc,dst)
+13:	stw,ma	t2,4(dstspc,dst)
+14:	ldw	8(srcspc,src),t1
+15:	ldw	12(srcspc,src),t2
+	ldo	16(src),src
+16:	stw,ma	t1,4(dstspc,dst)
+17:	stw,ma	t2,4(dstspc,dst)
+
+	ASM_EXCEPTIONTABLE_ENTRY(10b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(11b,.Lcopy8_fault)
+	ASM_EXCEPTIONTABLE_ENTRY(12b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(13b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(14b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(15b,.Lcopy8_fault)
+	ASM_EXCEPTIONTABLE_ENTRY(16b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(17b,.Lcopy_done)
+
+	b	.Lcopy_loop_4
+	ldo	-16(len),len
+
+.Lbyte_loop:
+	cmpclr,COND(<>) len,%r0,%r0
+	b,n	.Lcopy_done
+20:	ldb	0(srcspc,src),t1
+	ldo	1(src),src
+21:	stb,ma	t1,1(dstspc,dst)
+	b	.Lbyte_loop
+	ldo	-1(len),len
+
+	ASM_EXCEPTIONTABLE_ENTRY(20b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(21b,.Lcopy_done)
+
+.Lcopy_done:
+	bv	%r0(%r2)
+	sub	end,dst,ret0
+
+
+	/* src and dst are not aligned the same way. */
+	/* need to go the hard way */
+.Lunaligned_copy:
+	/* align until dst is 32bit-word-aligned */
+	extru	dst,31,2,t1
+	cmpib,COND(=),n	0,t1,.Lcopy_dstaligned
+20:	ldb	0(srcspc,src),t1
+	ldo	1(src),src
+21:	stb,ma	t1,1(dstspc,dst)
+	b	.Lunaligned_copy
+	ldo	-1(len),len
+
+	ASM_EXCEPTIONTABLE_ENTRY(20b,.Lcopy_done)
+	ASM_EXCEPTIONTABLE_ENTRY(21b,.Lcopy_done)
+
+.Lcopy_dstaligned:
+
+	/* store src, dst and len in safe place */
+	copy	src,save_src
+	copy	dst,save_dst
+	copy	len,save_len
+
+	/* len now needs give number of words to copy */
+	SHRREG	len,2,len
+
+	/*
+	 * Copy from a not-aligned src to an aligned dst using shifts.
+	 * Handles 4 words per loop.
+	 */
+
+	depw,z src,28,2,t0
+	subi 32,t0,t0
+	mtsar t0
+	extru len,31,2,t0
+	cmpib,= 2,t0,.Lcase2
+	/* Make src aligned by rounding it down.  */
+	depi 0,31,2,src
+
+	cmpiclr,<> 3,t0,%r0
+	b,n .Lcase3
+	cmpiclr,<> 1,t0,%r0
+	b,n .Lcase1
+.Lcase0:
+	cmpb,= %r0,len,.Lcda_finish
+	nop
+
+1:	ldw,ma 4(srcspc,src), a3
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+1:	ldw,ma 4(srcspc,src), a0
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	b,n .Ldo3
+.Lcase1:
+1:	ldw,ma 4(srcspc,src), a2
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+1:	ldw,ma 4(srcspc,src), a3
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	ldo -1(len),len
+	cmpb,=,n %r0,len,.Ldo0
+.Ldo4:
+1:	ldw,ma 4(srcspc,src), a0
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	shrpw a2, a3, %sar, t0
+1:	stw,ma t0, 4(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcopy_done)
+.Ldo3:
+1:	ldw,ma 4(srcspc,src), a1
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	shrpw a3, a0, %sar, t0
+1:	stw,ma t0, 4(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcopy_done)
+.Ldo2:
+1:	ldw,ma 4(srcspc,src), a2
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	shrpw a0, a1, %sar, t0
+1:	stw,ma t0, 4(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcopy_done)
+.Ldo1:
+1:	ldw,ma 4(srcspc,src), a3
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	shrpw a1, a2, %sar, t0
+1:	stw,ma t0, 4(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcopy_done)
+	ldo -4(len),len
+	cmpb,<> %r0,len,.Ldo4
+	nop
+.Ldo0:
+	shrpw a2, a3, %sar, t0
+1:	stw,ma t0, 4(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcopy_done)
+
+.Lcda_rdfault:
+.Lcda_finish:
+	/* calculate new src, dst and len and jump to byte-copy loop */
+	sub	dst,save_dst,t0
+	add	save_src,t0,src
+	b	.Lbyte_loop
+	sub	save_len,t0,len
+
+.Lcase3:
+1:	ldw,ma 4(srcspc,src), a0
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+1:	ldw,ma 4(srcspc,src), a1
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	b .Ldo2
+	ldo 1(len),len
+.Lcase2:
+1:	ldw,ma 4(srcspc,src), a1
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+1:	ldw,ma 4(srcspc,src), a2
+	ASM_EXCEPTIONTABLE_ENTRY(1b,.Lcda_rdfault)
+	b .Ldo1
+	ldo 2(len),len
+
+
+	/* fault exception fixup handlers: */
+#ifdef CONFIG_64BIT
+.Lcopy16_fault:
+10:	b	.Lcopy_done
+	std,ma	t1,8(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(10b,.Lcopy_done)
+#endif
+
+.Lcopy8_fault:
+10:	b	.Lcopy_done
+	stw,ma	t1,4(dstspc,dst)
+	ASM_EXCEPTIONTABLE_ENTRY(10b,.Lcopy_done)
+
+	.exit
+ENDPROC_CFI(pa_memcpy)
+	.procend
+
 	.end

arch/parisc/lib/memcpy.c

@@ -2,7 +2,7 @@
  *    Optimized memory copy routines.
  *
  *    Copyright (C) 2004 Randolph Chung <tausq@debian.org>
- *    Copyright (C) 2013 Helge Deller <deller@gmx.de>
+ *    Copyright (C) 2013-2017 Helge Deller <deller@gmx.de>
  *
  *    This program is free software; you can redistribute it and/or modify
  *    it under the terms of the GNU General Public License as published by
@@ -21,474 +21,21 @@
  *    Portions derived from the GNU C Library
  *    Copyright (C) 1991, 1997, 2003 Free Software Foundation, Inc.
  *
- * Several strategies are tried to try to get the best performance for various
- * conditions. In the optimal case, we copy 64-bytes in an unrolled loop using 
- * fp regs. This is followed by loops that copy 32- or 16-bytes at a time using
- * general registers.  Unaligned copies are handled either by aligning the 
- * destination and then using shift-and-write method, or in a few cases by 
- * falling back to a byte-at-a-time copy.
- *
- * I chose to implement this in C because it is easier to maintain and debug,
- * and in my experiments it appears that the C code generated by gcc (3.3/3.4
- * at the time of writing) is fairly optimal. Unfortunately some of the 
- * semantics of the copy routine (exception handling) is difficult to express
- * in C, so we have to play some tricks to get it to work.
- *
- * All the loads and stores are done via explicit asm() code in order to use
- * the right space registers. 
- * 
- * Testing with various alignments and buffer sizes shows that this code is 
- * often >10x faster than a simple byte-at-a-time copy, even for strangely
- * aligned operands. It is interesting to note that the glibc version
- * of memcpy (written in C) is actually quite fast already. This routine is 
- * able to beat it by 30-40% for aligned copies because of the loop unrolling, 
- * but in some cases the glibc version is still slightly faster. This lends 
- * more credibility that gcc can generate very good code as long as we are 
- * careful.
- *
- * TODO:
- * - cache prefetching needs more experimentation to get optimal settings
- * - try not to use the post-increment address modifiers; they create additional
- *   interlocks
- * - replace byte-copy loops with stybs sequences
  */
 
-#ifdef __KERNEL__
 #include <linux/module.h>
 #include <linux/compiler.h>
 #include <linux/uaccess.h>
-#define s_space "%%sr1"
-#define d_space "%%sr2"
-#else
-#include "memcpy.h"
-#define s_space "%%sr0"
-#define d_space "%%sr0"
-#define pa_memcpy new2_copy
-#endif
 
 DECLARE_PER_CPU(struct exception_data, exception_data);
 
-#define preserve_branch(label)	do {					\
-	volatile int dummy = 0;						\
-	/* The following branch is never taken, it's just here to  */	\
-	/* prevent gcc from optimizing away our exception code. */ 	\
-	if (unlikely(dummy != dummy))					\
-		goto label;						\
-} while (0)
-
 #define get_user_space() (segment_eq(get_fs(), KERNEL_DS) ? 0 : mfsp(3))
 #define get_kernel_space() (0)
 
-#define MERGE(w0, sh_1, w1, sh_2)  ({					\
-	unsigned int _r;						\
-	asm volatile (							\
-	"mtsar %3\n"							\
-	"shrpw %1, %2, %%sar, %0\n"					\
-	: "=r"(_r)							\
-	: "r"(w0), "r"(w1), "r"(sh_2)					\
-	);								\
-	_r;								\
-})
-#define THRESHOLD	16
-
-#ifdef DEBUG_MEMCPY
-#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __func__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
-#else
-#define DPRINTF(fmt, args...)
-#endif
-
-#define def_load_ai_insn(_insn,_sz,_tt,_s,_a,_t,_e)	\
-	__asm__ __volatile__ (				\
-	"1:\t" #_insn ",ma " #_sz "(" _s ",%1), %0\n\t"	\
-	ASM_EXCEPTIONTABLE_ENTRY(1b,_e)			\
-	: _tt(_t), "+r"(_a)				\
-	: 						\
-	: "r8")
-
-#define def_store_ai_insn(_insn,_sz,_tt,_s,_a,_t,_e) 	\
-	__asm__ __volatile__ (				\
-	"1:\t" #_insn ",ma %1, " #_sz "(" _s ",%0)\n\t"	\
-	ASM_EXCEPTIONTABLE_ENTRY(1b,_e)			\
-	: "+r"(_a) 					\
-	: _tt(_t)					\
-	: "r8")
-
-#define ldbma(_s, _a, _t, _e) def_load_ai_insn(ldbs,1,"=r",_s,_a,_t,_e)
-#define stbma(_s, _t, _a, _e) def_store_ai_insn(stbs,1,"r",_s,_a,_t,_e)
-#define ldwma(_s, _a, _t, _e) def_load_ai_insn(ldw,4,"=r",_s,_a,_t,_e)
-#define stwma(_s, _t, _a, _e) def_store_ai_insn(stw,4,"r",_s,_a,_t,_e)
-#define flddma(_s, _a, _t, _e) def_load_ai_insn(fldd,8,"=f",_s,_a,_t,_e)
-#define fstdma(_s, _t, _a, _e) def_store_ai_insn(fstd,8,"f",_s,_a,_t,_e)
-
-#define def_load_insn(_insn,_tt,_s,_o,_a,_t,_e) 	\
-	__asm__ __volatile__ (				\
-	"1:\t" #_insn " " #_o "(" _s ",%1), %0\n\t"	\
-	ASM_EXCEPTIONTABLE_ENTRY(1b,_e)			\
-	: _tt(_t) 					\
-	: "r"(_a)					\
-	: "r8")
-
-#define def_store_insn(_insn,_tt,_s,_t,_o,_a,_e) 	\
-	__asm__ __volatile__ (				\
-	"1:\t" #_insn " %0, " #_o "(" _s ",%1)\n\t" 	\
-	ASM_EXCEPTIONTABLE_ENTRY(1b,_e)			\
-	: 						\
-	: _tt(_t), "r"(_a)				\
-	: "r8")
-
-#define ldw(_s,_o,_a,_t,_e)	def_load_insn(ldw,"=r",_s,_o,_a,_t,_e)
-#define stw(_s,_t,_o,_a,_e) 	def_store_insn(stw,"r",_s,_t,_o,_a,_e)
-
-#ifdef  CONFIG_PREFETCH
-static inline void prefetch_src(const void *addr)
-{
-	__asm__("ldw 0(" s_space ",%0), %%r0" : : "r" (addr));
-}
-
-static inline void prefetch_dst(const void *addr)
-{
-	__asm__("ldd 0(" d_space ",%0), %%r0" : : "r" (addr));
-}
-#else
-#define prefetch_src(addr) do { } while(0)
-#define prefetch_dst(addr) do { } while(0)
-#endif
-
-#define PA_MEMCPY_OK		0
-#define PA_MEMCPY_LOAD_ERROR	1
-#define PA_MEMCPY_STORE_ERROR	2
-
-/* Copy from a not-aligned src to an aligned dst, using shifts. Handles 4 words
- * per loop.  This code is derived from glibc. 
- */
-static noinline unsigned long copy_dstaligned(unsigned long dst,
-					unsigned long src, unsigned long len)
-{
-	/* gcc complains that a2 and a3 may be uninitialized, but actually
-	 * they cannot be.  Initialize a2/a3 to shut gcc up.
-	 */
-	register unsigned int a0, a1, a2 = 0, a3 = 0;
-	int sh_1, sh_2;
-
-	/* prefetch_src((const void *)src); */
-
-	/* Calculate how to shift a word read at the memory operation
-	   aligned srcp to make it aligned for copy.  */
-	sh_1 = 8 * (src % sizeof(unsigned int));
-	sh_2 = 8 * sizeof(unsigned int) - sh_1;
-
-	/* Make src aligned by rounding it down.  */
-	src &= -sizeof(unsigned int);
-
-	switch (len % 4)
-	{
-		case 2:
-			/* a1 = ((unsigned int *) src)[0];
-			   a2 = ((unsigned int *) src)[1]; */
-			ldw(s_space, 0, src, a1, cda_ldw_exc);
-			ldw(s_space, 4, src, a2, cda_ldw_exc);
-			src -= 1 * sizeof(unsigned int);
-			dst -= 3 * sizeof(unsigned int);
-			len += 2;
-			goto do1;
-		case 3:
-			/* a0 = ((unsigned int *) src)[0];
-			   a1 = ((unsigned int *) src)[1]; */
-			ldw(s_space, 0, src, a0, cda_ldw_exc);
-			ldw(s_space, 4, src, a1, cda_ldw_exc);
-			src -= 0 * sizeof(unsigned int);
-			dst -= 2 * sizeof(unsigned int);
-			len += 1;
-			goto do2;
-		case 0:
-			if (len == 0)
-				return PA_MEMCPY_OK;
-			/* a3 = ((unsigned int *) src)[0];
-			   a0 = ((unsigned int *) src)[1]; */
-			ldw(s_space, 0, src, a3, cda_ldw_exc);
-			ldw(s_space, 4, src, a0, cda_ldw_exc);
-			src -=-1 * sizeof(unsigned int);
-			dst -= 1 * sizeof(unsigned int);
-			len += 0;
-			goto do3;
-		case 1:
-			/* a2 = ((unsigned int *) src)[0];
-			   a3 = ((unsigned int *) src)[1]; */
-			ldw(s_space, 0, src, a2, cda_ldw_exc);
-			ldw(s_space, 4, src, a3, cda_ldw_exc);
-			src -=-2 * sizeof(unsigned int);
-			dst -= 0 * sizeof(unsigned int);
-			len -= 1;
-			if (len == 0)
-				goto do0;
-			goto do4;			/* No-op.  */
-	}
-
-	do
-	{
-		/* prefetch_src((const void *)(src + 4 * sizeof(unsigned int))); */
-do4:
-		/* a0 = ((unsigned int *) src)[0]; */
-		ldw(s_space, 0, src, a0, cda_ldw_exc);
-		/* ((unsigned int *) dst)[0] = MERGE (a2, sh_1, a3, sh_2); */
-		stw(d_space, MERGE (a2, sh_1, a3, sh_2), 0, dst, cda_stw_exc);
-do3:
-		/* a1 = ((unsigned int *) src)[1]; */
-		ldw(s_space, 4, src, a1, cda_ldw_exc);
-		/* ((unsigned int *) dst)[1] = MERGE (a3, sh_1, a0, sh_2); */
-		stw(d_space, MERGE (a3, sh_1, a0, sh_2), 4, dst, cda_stw_exc);
-do2:
-		/* a2 = ((unsigned int *) src)[2]; */
-		ldw(s_space, 8, src, a2, cda_ldw_exc);
-		/* ((unsigned int *) dst)[2] = MERGE (a0, sh_1, a1, sh_2); */
-		stw(d_space, MERGE (a0, sh_1, a1, sh_2), 8, dst, cda_stw_exc);
-do1:
-		/* a3 = ((unsigned int *) src)[3]; */
-		ldw(s_space, 12, src, a3, cda_ldw_exc);
-		/* ((unsigned int *) dst)[3] = MERGE (a1, sh_1, a2, sh_2); */
-		stw(d_space, MERGE (a1, sh_1, a2, sh_2), 12, dst, cda_stw_exc);
-
-		src += 4 * sizeof(unsigned int);
-		dst += 4 * sizeof(unsigned int);
-		len -= 4;
-	}
-	while (len != 0);
-
-do0:
-	/* ((unsigned int *) dst)[0] = MERGE (a2, sh_1, a3, sh_2); */
-	stw(d_space, MERGE (a2, sh_1, a3, sh_2), 0, dst, cda_stw_exc);
-
-	preserve_branch(handle_load_error);
-	preserve_branch(handle_store_error);
-
-	return PA_MEMCPY_OK;
-
-handle_load_error:
-	__asm__ __volatile__ ("cda_ldw_exc:\n");
-	return PA_MEMCPY_LOAD_ERROR;
-
-handle_store_error:
-	__asm__ __volatile__ ("cda_stw_exc:\n");
-	return PA_MEMCPY_STORE_ERROR;
-}
-
-
-/* Returns PA_MEMCPY_OK, PA_MEMCPY_LOAD_ERROR or PA_MEMCPY_STORE_ERROR.
- * In case of an access fault the faulty address can be read from the per_cpu
- * exception data struct. */
-static noinline unsigned long pa_memcpy_internal(void *dstp, const void *srcp,
-					unsigned long len)
-{
-	register unsigned long src, dst, t1, t2, t3;
-	register unsigned char *pcs, *pcd;
-	register unsigned int *pws, *pwd;
-	register double *pds, *pdd;
-	unsigned long ret;
-
-	src = (unsigned long)srcp;
-	dst = (unsigned long)dstp;
-	pcs = (unsigned char *)srcp;
-	pcd = (unsigned char *)dstp;
-
-	/* prefetch_src((const void *)srcp); */
-
-	if (len < THRESHOLD)
-		goto byte_copy;
-
-	/* Check alignment */
-	t1 = (src ^ dst);
-	if (unlikely(t1 & (sizeof(double)-1)))
-		goto unaligned_copy;
-
-	/* src and dst have same alignment. */
-
-	/* Copy bytes till we are double-aligned. */
-	t2 = src & (sizeof(double) - 1);
-	if (unlikely(t2 != 0)) {
-		t2 = sizeof(double) - t2;
-		while (t2 && len) {
-			/* *pcd++ = *pcs++; */
-			ldbma(s_space, pcs, t3, pmc_load_exc);
-			len--;
-			stbma(d_space, t3, pcd, pmc_store_exc);
-			t2--;
-		}
-	}
-
-	pds = (double *)pcs;
-	pdd = (double *)pcd;
-
-#if 0
-	/* Copy 8 doubles at a time */
-	while (len >= 8*sizeof(double)) {
-		register double r1, r2, r3, r4, r5, r6, r7, r8;
-		/* prefetch_src((char *)pds + L1_CACHE_BYTES); */
-		flddma(s_space, pds, r1, pmc_load_exc);
-		flddma(s_space, pds, r2, pmc_load_exc);
-		flddma(s_space, pds, r3, pmc_load_exc);
-		flddma(s_space, pds, r4, pmc_load_exc);
-		fstdma(d_space, r1, pdd, pmc_store_exc);
-		fstdma(d_space, r2, pdd, pmc_store_exc);
-		fstdma(d_space, r3, pdd, pmc_store_exc);
-		fstdma(d_space, r4, pdd, pmc_store_exc);
-
-#if 0
-		if (L1_CACHE_BYTES <= 32)
-			prefetch_src((char *)pds + L1_CACHE_BYTES);
-#endif
-		flddma(s_space, pds, r5, pmc_load_exc);
-		flddma(s_space, pds, r6, pmc_load_exc);
-		flddma(s_space, pds, r7, pmc_load_exc);
-		flddma(s_space, pds, r8, pmc_load_exc);
-		fstdma(d_space, r5, pdd, pmc_store_exc);
-		fstdma(d_space, r6, pdd, pmc_store_exc);
-		fstdma(d_space, r7, pdd, pmc_store_exc);
-		fstdma(d_space, r8, pdd, pmc_store_exc);
-		len -= 8*sizeof(double);
-	}
-#endif
-
-	pws = (unsigned int *)pds;
-	pwd = (unsigned int *)pdd;
-
-word_copy:
-	while (len >= 8*sizeof(unsigned int)) {
-		register unsigned int r1,r2,r3,r4,r5,r6,r7,r8;
-		/* prefetch_src((char *)pws + L1_CACHE_BYTES); */
-		ldwma(s_space, pws, r1, pmc_load_exc);
-		ldwma(s_space, pws, r2, pmc_load_exc);
-		ldwma(s_space, pws, r3, pmc_load_exc);
-		ldwma(s_space, pws, r4, pmc_load_exc);
-		stwma(d_space, r1, pwd, pmc_store_exc);
-		stwma(d_space, r2, pwd, pmc_store_exc);
-		stwma(d_space, r3, pwd, pmc_store_exc);
-		stwma(d_space, r4, pwd, pmc_store_exc);
-
-		ldwma(s_space, pws, r5, pmc_load_exc);
-		ldwma(s_space, pws, r6, pmc_load_exc);
-		ldwma(s_space, pws, r7, pmc_load_exc);
-		ldwma(s_space, pws, r8, pmc_load_exc);
-		stwma(d_space, r5, pwd, pmc_store_exc);
-		stwma(d_space, r6, pwd, pmc_store_exc);
-		stwma(d_space, r7, pwd, pmc_store_exc);
-		stwma(d_space, r8, pwd, pmc_store_exc);
-		len -= 8*sizeof(unsigned int);
-	}
-
-	while (len >= 4*sizeof(unsigned int)) {
-		register unsigned int r1,r2,r3,r4;
-		ldwma(s_space, pws, r1, pmc_load_exc);
-		ldwma(s_space, pws, r2, pmc_load_exc);
-		ldwma(s_space, pws, r3, pmc_load_exc);
-		ldwma(s_space, pws, r4, pmc_load_exc);
-		stwma(d_space, r1, pwd, pmc_store_exc);
-		stwma(d_space, r2, pwd, pmc_store_exc);
-		stwma(d_space, r3, pwd, pmc_store_exc);
-		stwma(d_space, r4, pwd, pmc_store_exc);
-		len -= 4*sizeof(unsigned int);
-	}
-
-	pcs = (unsigned char *)pws;
-	pcd = (unsigned char *)pwd;
-
-byte_copy:
-	while (len) {
-		/* *pcd++ = *pcs++; */
-		ldbma(s_space, pcs, t3, pmc_load_exc);
-		stbma(d_space, t3, pcd, pmc_store_exc);
-		len--;
-	}
-
-	return PA_MEMCPY_OK;
-
-unaligned_copy:
-	/* possibly we are aligned on a word, but not on a double... */
-	if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) {
-		t2 = src & (sizeof(unsigned int) - 1);
-
-		if (unlikely(t2 != 0)) {
-			t2 = sizeof(unsigned int) - t2;
-			while (t2) {
-				/* *pcd++ = *pcs++; */
-				ldbma(s_space, pcs, t3, pmc_load_exc);
-				stbma(d_space, t3, pcd, pmc_store_exc);
-				len--;
-				t2--;
-			}
-		}
-
-		pws = (unsigned int *)pcs;
-		pwd = (unsigned int *)pcd;
-		goto word_copy;
-	}
-
-	/* Align the destination.  */
-	if (unlikely((dst & (sizeof(unsigned int) - 1)) != 0)) {
-		t2 = sizeof(unsigned int) - (dst & (sizeof(unsigned int) - 1));
-		while (t2) {
-			/* *pcd++ = *pcs++; */
-			ldbma(s_space, pcs, t3, pmc_load_exc);
-			stbma(d_space, t3, pcd, pmc_store_exc);
-			len--;
-			t2--;
-		}
-		dst = (unsigned long)pcd;
-		src = (unsigned long)pcs;
-	}
-
-	ret = copy_dstaligned(dst, src, len / sizeof(unsigned int));
-	if (ret)
-		return ret;
-
-	pcs += (len & -sizeof(unsigned int));
-	pcd += (len & -sizeof(unsigned int));
-	len %= sizeof(unsigned int);
-
-	preserve_branch(handle_load_error);
-	preserve_branch(handle_store_error);
-
-	goto byte_copy;
-
-handle_load_error:
-	__asm__ __volatile__ ("pmc_load_exc:\n");
-	return PA_MEMCPY_LOAD_ERROR;
-
-handle_store_error:
-	__asm__ __volatile__ ("pmc_store_exc:\n");
-	return PA_MEMCPY_STORE_ERROR;
-}
-
-
 /* Returns 0 for success, otherwise, returns number of bytes not transferred. */
-static unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
-{
-	unsigned long ret, fault_addr, reference;
-	struct exception_data *d;
-
-	ret = pa_memcpy_internal(dstp, srcp, len);
-	if (likely(ret == PA_MEMCPY_OK))
-		return 0;
-
-	/* if a load or store fault occured we can get the faulty addr */
-	d = this_cpu_ptr(&exception_data);
-	fault_addr = d->fault_addr;
-
-	/* error in load or store? */
-	if (ret == PA_MEMCPY_LOAD_ERROR)
-		reference = (unsigned long) srcp;
-	else
-		reference = (unsigned long) dstp;
+extern unsigned long pa_memcpy(void *dst, const void *src,
+				unsigned long len);
 
-	DPRINTF("pa_memcpy: fault type = %lu, len=%lu fault_addr=%lu ref=%lu\n",
-		ret, len, fault_addr, reference);
-
-	if (fault_addr >= reference)
-		return len - (fault_addr - reference);
-	else
-		return len;
-}
-
-#ifdef __KERNEL__
 unsigned long __copy_to_user(void __user *dst, const void *src,
 			     unsigned long len)
 {
@@ -537,5 +84,3 @@ long probe_kernel_read(void *dst, const void *src, size_t size)
 
 	return __probe_kernel_read(dst, src, size);
 }
-
-#endif

arch/parisc/mm/fault.c

@@ -150,6 +150,23 @@ int fixup_exception(struct pt_regs *regs)
 		d->fault_space = regs->isr;
 		d->fault_addr = regs->ior;
 
+		/*
+		 * Fix up get_user() and put_user().
+		 * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() sets the least-significant
+		 * bit in the relative address of the fixup routine to indicate
+		 * that %r8 should be loaded with -EFAULT to report a userspace
+		 * access error.
+		 */
+		if (fix->fixup & 1) {
+			regs->gr[8] = -EFAULT;
+
+			/* zero target register for get_user() */
+			if (parisc_acctyp(0, regs->iir) == VM_READ) {
+				int treg = regs->iir & 0x1f;
+				regs->gr[treg] = 0;
+			}
+		}
+
 		regs->iaoq[0] = (unsigned long)&fix->fixup + fix->fixup;
 		regs->iaoq[0] &= ~3;
 		/*

arch/s390/include/asm/sections.h

@@ -4,6 +4,5 @@
 #include <asm-generic/sections.h>
 
 extern char _eshared[], _ehead[];
-extern char __start_ro_after_init[], __end_ro_after_init[];
 
 #endif

arch/s390/kernel/vmlinux.lds.S

@@ -63,11 +63,9 @@ SECTIONS
 
 	. = ALIGN(PAGE_SIZE);
 	__start_ro_after_init = .;
-	__start_data_ro_after_init = .;
 	.data..ro_after_init : {
 		 *(.data..ro_after_init)
 	}
-	__end_data_ro_after_init = .;
 	EXCEPTION_TABLE(16)
 	. = ALIGN(PAGE_SIZE);
 	__end_ro_after_init = .;

arch/sparc/kernel/ptrace_64.c

@@ -351,7 +351,7 @@ static int genregs64_set(struct task_struct *target,
 	}
 
 	if (!ret) {
-		unsigned long y;
+		unsigned long y = regs->y;
 
 		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 					 &y,

arch/x86/Makefile

@@ -120,10 +120,6 @@ else
         # -funit-at-a-time shrinks the kernel .text considerably
         # unfortunately it makes reading oopses harder.
         KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
-
-        # this works around some issues with generating unwind tables in older gccs
-        # newer gccs do it by default
-        KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args)
 endif
 
 ifdef CONFIG_X86_X32
@@ -147,6 +143,37 @@ ifeq ($(CONFIG_KMEMCHECK),y)
 	KBUILD_CFLAGS += $(call cc-option,-fno-builtin-memcpy)
 endif
 
+#
+# If the function graph tracer is used with mcount instead of fentry,
+# '-maccumulate-outgoing-args' is needed to prevent a GCC bug
+# (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42109)
+#
+ifdef CONFIG_FUNCTION_GRAPH_TRACER
+  ifndef CONFIG_HAVE_FENTRY
+	ACCUMULATE_OUTGOING_ARGS := 1
+  else
+    ifeq ($(call cc-option-yn, -mfentry), n)
+	ACCUMULATE_OUTGOING_ARGS := 1
+    endif
+  endif
+endif
+
+#
+# Jump labels need '-maccumulate-outgoing-args' for gcc < 4.5.2 to prevent a
+# GCC bug (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=46226).  There's no way
+# to test for this bug at compile-time because the test case needs to execute,
+# which is a no-go for cross compilers.  So check the GCC version instead.
+#
+ifdef CONFIG_JUMP_LABEL
+  ifneq ($(ACCUMULATE_OUTGOING_ARGS), 1)
+	ACCUMULATE_OUTGOING_ARGS = $(call cc-if-fullversion, -lt, 040502, 1)
+  endif
+endif
+
+ifeq ($(ACCUMULATE_OUTGOING_ARGS), 1)
+	KBUILD_CFLAGS += -maccumulate-outgoing-args
+endif
+
 # Stackpointer is addressed different for 32 bit and 64 bit x86
 sp-$(CONFIG_X86_32) := esp
 sp-$(CONFIG_X86_64) := rsp

arch/x86/Makefile_32.cpu

@@ -45,24 +45,6 @@ cflags-$(CONFIG_MGEODE_LX)	+= $(call cc-option,-march=geode,-march=pentium-mmx)
 # cpu entries
 cflags-$(CONFIG_X86_GENERIC) 	+= $(call tune,generic,$(call tune,i686))
 
-# Work around the pentium-mmx code generator madness of gcc4.4.x which
-# does stack alignment by generating horrible code _before_ the mcount
-# prologue (push %ebp, mov %esp, %ebp) which breaks the function graph
-# tracer assumptions. For i686, generic, core2 this is set by the
-# compiler anyway
-ifeq ($(CONFIG_FUNCTION_GRAPH_TRACER), y)
-ADD_ACCUMULATE_OUTGOING_ARGS := y
-endif
-
-# Work around to a bug with asm goto with first implementations of it
-# in gcc causing gcc to mess up the push and pop of the stack in some
-# uses of asm goto.
-ifeq ($(CONFIG_JUMP_LABEL), y)
-ADD_ACCUMULATE_OUTGOING_ARGS := y
-endif
-
-cflags-$(ADD_ACCUMULATE_OUTGOING_ARGS) += $(call cc-option,-maccumulate-outgoing-args)
-
 # Bug fix for binutils: this option is required in order to keep
 # binutils from generating NOPL instructions against our will.
 ifneq ($(CONFIG_X86_P6_NOP),y)

arch/x86/boot/compressed/error.c

@@ -4,6 +4,7 @@
  * memcpy() and memmove() are defined for the compressed boot environment.
  */
 #include "misc.h"
+#include "error.h"
 
 void warn(char *m)
 {

arch/x86/events/core.c

@@ -2256,6 +2256,7 @@ void arch_perf_update_userpage(struct perf_event *event,
 			       struct perf_event_mmap_page *userpg, u64 now)
 {
 	struct cyc2ns_data *data;
+	u64 offset;
 
 	userpg->cap_user_time = 0;
 	userpg->cap_user_time_zero = 0;
@@ -2263,11 +2264,13 @@ void arch_perf_update_userpage(struct perf_event *event,
 		!!(event->hw.flags & PERF_X86_EVENT_RDPMC_ALLOWED);
 	userpg->pmc_width = x86_pmu.cntval_bits;
 
-	if (!sched_clock_stable())
+	if (!using_native_sched_clock() || !sched_clock_stable())
 		return;
 
 	data = cyc2ns_read_begin();
 
+	offset = data->cyc2ns_offset + __sched_clock_offset;
+
 	/*
 	 * Internal timekeeping for enabled/running/stopped times
 	 * is always in the local_clock domain.
@@ -2275,7 +2278,7 @@ void arch_perf_update_userpage(struct perf_event *event,
 	userpg->cap_user_time = 1;
 	userpg->time_mult = data->cyc2ns_mul;
 	userpg->time_shift = data->cyc2ns_shift;
-	userpg->time_offset = data->cyc2ns_offset - now;
+	userpg->time_offset = offset - now;
 
 	/*
 	 * cap_user_time_zero doesn't make sense when we're using a different
@@ -2283,7 +2286,7 @@ void arch_perf_update_userpage(struct perf_event *event,
 	 */
 	if (!event->attr.use_clockid) {
 		userpg->cap_user_time_zero = 1;
-		userpg->time_zero = data->cyc2ns_offset;
+		userpg->time_zero = offset;
 	}
 
 	cyc2ns_read_end(data);

arch/x86/include/asm/kvm_page_track.h

@@ -46,6 +46,7 @@ struct kvm_page_track_notifier_node {
 };
 
 void kvm_page_track_init(struct kvm *kvm);
+void kvm_page_track_cleanup(struct kvm *kvm);
 
 void kvm_page_track_free_memslot(struct kvm_memory_slot *free,
 				 struct kvm_memory_slot *dont);

arch/x86/include/asm/timer.h

@@ -12,6 +12,8 @@ extern int recalibrate_cpu_khz(void);
 
 extern int no_timer_check;
 
+extern bool using_native_sched_clock(void);
+
 /*
  * We use the full linear equation: f(x) = a + b*x, in order to allow
  * a continuous function in the face of dynamic freq changes.

arch/x86/include/asm/uv/uv_hub.h

@@ -485,15 +485,17 @@ static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr)
 
 	if (paddr < uv_hub_info->lowmem_remap_top)
 		paddr |= uv_hub_info->lowmem_remap_base;
-	paddr |= uv_hub_info->gnode_upper;
-	if (m_val)
+
+	if (m_val) {
+		paddr |= uv_hub_info->gnode_upper;
 		paddr = ((paddr << uv_hub_info->m_shift)
 						>> uv_hub_info->m_shift) |
 			((paddr >> uv_hub_info->m_val)
 						<< uv_hub_info->n_lshift);
-	else
+	} else {
 		paddr |= uv_soc_phys_ram_to_nasid(paddr)
 						<< uv_hub_info->gpa_shift;
+	}
 	return paddr;
 }
 

arch/x86/kernel/apic/x2apic_uv_x.c

@@ -1105,7 +1105,8 @@ void __init uv_init_hub_info(struct uv_hub_info_s *hi)
 	node_id.v		= uv_read_local_mmr(UVH_NODE_ID);
 	uv_cpuid.gnode_shift	= max_t(unsigned int, uv_cpuid.gnode_shift, mn.n_val);
 	hi->gnode_extra		= (node_id.s.node_id & ~((1 << uv_cpuid.gnode_shift) - 1)) >> 1;
-	hi->gnode_upper		= (unsigned long)hi->gnode_extra << mn.m_val;
+	if (mn.m_val)
+		hi->gnode_upper	= (u64)hi->gnode_extra << mn.m_val;
 
 	if (uv_gp_table) {
 		hi->global_mmr_base	= uv_gp_table->mmr_base;

arch/x86/kernel/cpu/mcheck/mce_amd.c

@@ -60,7 +60,7 @@ static const char * const th_names[] = {
 	"load_store",
 	"insn_fetch",
 	"combined_unit",
-	"",
+	"decode_unit",
 	"northbridge",
 	"execution_unit",
 };

arch/x86/kernel/ftrace.c

@@ -29,6 +29,12 @@
 #include <asm/ftrace.h>
 #include <asm/nops.h>
 
+#if defined(CONFIG_FUNCTION_GRAPH_TRACER) && \
+	!defined(CC_USING_FENTRY) && \
+	!defined(CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE)
+# error The following combination is not supported: ((compiler missing -mfentry) || (CONFIG_X86_32 and !CONFIG_DYNAMIC_FTRACE)) && CONFIG_FUNCTION_GRAPH_TRACER && CONFIG_CC_OPTIMIZE_FOR_SIZE
+#endif
+
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 int ftrace_arch_code_modify_prepare(void)

arch/x86/kernel/tsc.c

@@ -328,7 +328,7 @@ unsigned long long sched_clock(void)
 	return paravirt_sched_clock();
 }
 
-static inline bool using_native_sched_clock(void)
+bool using_native_sched_clock(void)
 {
 	return pv_time_ops.sched_clock == native_sched_clock;
 }
@@ -336,7 +336,7 @@ static inline bool using_native_sched_clock(void)
 unsigned long long
 sched_clock(void) __attribute__((alias("native_sched_clock")));
 
-static inline bool using_native_sched_clock(void) { return true; }
+bool using_native_sched_clock(void) { return true; }
 #endif
 
 int check_tsc_unstable(void)

arch/x86/kvm/i8259.c

@@ -657,6 +657,9 @@ void kvm_pic_destroy(struct kvm *kvm)
 {
 	struct kvm_pic *vpic = kvm->arch.vpic;
 
+	if (!vpic)
+		return;
+
 	kvm_io_bus_unregister_dev(vpic->kvm, KVM_PIO_BUS, &vpic->dev_master);
 	kvm_io_bus_unregister_dev(vpic->kvm, KVM_PIO_BUS, &vpic->dev_slave);
 	kvm_io_bus_unregister_dev(vpic->kvm, KVM_PIO_BUS, &vpic->dev_eclr);

arch/x86/kvm/ioapic.c

@@ -635,6 +635,9 @@ void kvm_ioapic_destroy(struct kvm *kvm)
 {
 	struct kvm_ioapic *ioapic = kvm->arch.vioapic;
 
+	if (!ioapic)
+		return;
+
 	cancel_delayed_work_sync(&ioapic->eoi_inject);
 	kvm_io_bus_unregister_dev(kvm, KVM_MMIO_BUS, &ioapic->dev);
 	kvm->arch.vioapic = NULL;

arch/x86/kvm/page_track.c

@@ -160,6 +160,14 @@ bool kvm_page_track_is_active(struct kvm_vcpu *vcpu, gfn_t gfn,
 	return !!ACCESS_ONCE(slot->arch.gfn_track[mode][index]);
 }
 
+void kvm_page_track_cleanup(struct kvm *kvm)
+{
+	struct kvm_page_track_notifier_head *head;
+
+	head = &kvm->arch.track_notifier_head;
+	cleanup_srcu_struct(&head->track_srcu);
+}
+
 void kvm_page_track_init(struct kvm *kvm)
 {
 	struct kvm_page_track_notifier_head *head;

arch/x86/kvm/svm.c

@@ -1379,6 +1379,9 @@ static void avic_vm_destroy(struct kvm *kvm)
 	unsigned long flags;
 	struct kvm_arch *vm_data = &kvm->arch;
 
+	if (!avic)
+		return;
+
 	avic_free_vm_id(vm_data->avic_vm_id);
 
 	if (vm_data->avic_logical_id_table_page)

arch/x86/kvm/vmx.c

@@ -1239,6 +1239,11 @@ static inline bool cpu_has_vmx_invvpid_global(void)
 	return vmx_capability.vpid & VMX_VPID_EXTENT_GLOBAL_CONTEXT_BIT;
 }
 
+static inline bool cpu_has_vmx_invvpid(void)
+{
+	return vmx_capability.vpid & VMX_VPID_INVVPID_BIT;
+}
+
 static inline bool cpu_has_vmx_ept(void)
 {
 	return vmcs_config.cpu_based_2nd_exec_ctrl &
@@ -2753,7 +2758,6 @@ static void nested_vmx_setup_ctls_msrs(struct vcpu_vmx *vmx)
 		SECONDARY_EXEC_RDTSCP |
 		SECONDARY_EXEC_DESC |
 		SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE |
-		SECONDARY_EXEC_ENABLE_VPID |
 		SECONDARY_EXEC_APIC_REGISTER_VIRT |
 		SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY |
 		SECONDARY_EXEC_WBINVD_EXITING |
@@ -2781,10 +2785,12 @@ static void nested_vmx_setup_ctls_msrs(struct vcpu_vmx *vmx)
 	 * though it is treated as global context.  The alternative is
 	 * not failing the single-context invvpid, and it is worse.
 	 */
-	if (enable_vpid)
+	if (enable_vpid) {
+		vmx->nested.nested_vmx_secondary_ctls_high |=
+			SECONDARY_EXEC_ENABLE_VPID;
 		vmx->nested.nested_vmx_vpid_caps = VMX_VPID_INVVPID_BIT |
 			VMX_VPID_EXTENT_SUPPORTED_MASK;
-	else
+	} else
 		vmx->nested.nested_vmx_vpid_caps = 0;
 
 	if (enable_unrestricted_guest)
@@ -4024,6 +4030,12 @@ static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
 	__vmx_flush_tlb(vcpu, to_vmx(vcpu)->vpid);
 }
 
+static void vmx_flush_tlb_ept_only(struct kvm_vcpu *vcpu)
+{
+	if (enable_ept)
+		vmx_flush_tlb(vcpu);
+}
+
 static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu)
 {
 	ulong cr0_guest_owned_bits = vcpu->arch.cr0_guest_owned_bits;
@@ -6517,8 +6529,10 @@ static __init int hardware_setup(void)
 	if (boot_cpu_has(X86_FEATURE_NX))
 		kvm_enable_efer_bits(EFER_NX);
 
-	if (!cpu_has_vmx_vpid())
+	if (!cpu_has_vmx_vpid() || !cpu_has_vmx_invvpid() ||
+		!(cpu_has_vmx_invvpid_single() || cpu_has_vmx_invvpid_global()))
 		enable_vpid = 0;
+
 	if (!cpu_has_vmx_shadow_vmcs())
 		enable_shadow_vmcs = 0;
 	if (enable_shadow_vmcs)
@@ -8501,7 +8515,8 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
 	    && kvm_vmx_exit_handlers[exit_reason])
 		return kvm_vmx_exit_handlers[exit_reason](vcpu);
 	else {
-		WARN_ONCE(1, "vmx: unexpected exit reason 0x%x\n", exit_reason);
+		vcpu_unimpl(vcpu, "vmx: unexpected exit reason 0x%x\n",
+				exit_reason);
 		kvm_queue_exception(vcpu, UD_VECTOR);
 		return 1;
 	}
@@ -8547,6 +8562,7 @@ static void vmx_set_virtual_x2apic_mode(struct kvm_vcpu *vcpu, bool set)
 	} else {
 		sec_exec_control &= ~SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE;
 		sec_exec_control |= SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
+		vmx_flush_tlb_ept_only(vcpu);
 	}
 	vmcs_write32(SECONDARY_VM_EXEC_CONTROL, sec_exec_control);
 
@@ -8572,8 +8588,10 @@ static void vmx_set_apic_access_page_addr(struct kvm_vcpu *vcpu, hpa_t hpa)
 	 */
 	if (!is_guest_mode(vcpu) ||
 	    !nested_cpu_has2(get_vmcs12(&vmx->vcpu),
-			     SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES))
+			     SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES)) {
 		vmcs_write64(APIC_ACCESS_ADDR, hpa);
+		vmx_flush_tlb_ept_only(vcpu);
+	}
 }
 
 static void vmx_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr)
@@ -9974,7 +9992,6 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u32 exec_control;
-	bool nested_ept_enabled = false;
 
 	vmcs_write16(GUEST_ES_SELECTOR, vmcs12->guest_es_selector);
 	vmcs_write16(GUEST_CS_SELECTOR, vmcs12->guest_cs_selector);
@@ -10121,8 +10138,6 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 				vmcs12->guest_intr_status);
 		}
 
-		nested_ept_enabled = (exec_control & SECONDARY_EXEC_ENABLE_EPT) != 0;
-
 		/*
 		 * Write an illegal value to APIC_ACCESS_ADDR. Later,
 		 * nested_get_vmcs12_pages will either fix it up or
@@ -10255,6 +10270,9 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 	if (nested_cpu_has_ept(vmcs12)) {
 		kvm_mmu_unload(vcpu);
 		nested_ept_init_mmu_context(vcpu);
+	} else if (nested_cpu_has2(vmcs12,
+				   SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES)) {
+		vmx_flush_tlb_ept_only(vcpu);
 	}
 
 	/*
@@ -10282,12 +10300,10 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 	vmx_set_efer(vcpu, vcpu->arch.efer);
 
 	/* Shadow page tables on either EPT or shadow page tables. */
-	if (nested_vmx_load_cr3(vcpu, vmcs12->guest_cr3, nested_ept_enabled,
+	if (nested_vmx_load_cr3(vcpu, vmcs12->guest_cr3, nested_cpu_has_ept(vmcs12),
 				entry_failure_code))
 		return 1;
 
-	kvm_mmu_reset_context(vcpu);
-
 	if (!enable_ept)
 		vcpu->arch.walk_mmu->inject_page_fault = vmx_inject_page_fault_nested;
 
@@ -11056,6 +11072,10 @@ static void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
 		vmx->nested.change_vmcs01_virtual_x2apic_mode = false;
 		vmx_set_virtual_x2apic_mode(vcpu,
 				vcpu->arch.apic_base & X2APIC_ENABLE);
+	} else if (!nested_cpu_has_ept(vmcs12) &&
+		   nested_cpu_has2(vmcs12,
+				   SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES)) {
+		vmx_flush_tlb_ept_only(vcpu);
 	}
 
 	/* This is needed for same reason as it was needed in prepare_vmcs02 */

arch/x86/kvm/x86.c

@@ -8153,11 +8153,12 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 	if (kvm_x86_ops->vm_destroy)
 		kvm_x86_ops->vm_destroy(kvm);
 	kvm_iommu_unmap_guest(kvm);
-	kfree(kvm->arch.vpic);
-	kfree(kvm->arch.vioapic);
+	kvm_pic_destroy(kvm);
+	kvm_ioapic_destroy(kvm);
 	kvm_free_vcpus(kvm);
 	kvfree(rcu_dereference_check(kvm->arch.apic_map, 1));
 	kvm_mmu_uninit_vm(kvm);
+	kvm_page_track_cleanup(kvm);
 }
 
 void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free,
@@ -8566,11 +8567,11 @@ void kvm_arch_async_page_present(struct kvm_vcpu *vcpu,
 {
 	struct x86_exception fault;
 
-	trace_kvm_async_pf_ready(work->arch.token, work->gva);
 	if (work->wakeup_all)
 		work->arch.token = ~0; /* broadcast wakeup */
 	else
 		kvm_del_async_pf_gfn(vcpu, work->arch.gfn);
+	trace_kvm_async_pf_ready(work->arch.token, work->gva);
 
 	if ((vcpu->arch.apf.msr_val & KVM_ASYNC_PF_ENABLED) &&
 	    !apf_put_user(vcpu, KVM_PV_REASON_PAGE_READY)) {

arch/x86/lib/memcpy_64.S

@@ -290,7 +290,7 @@ EXPORT_SYMBOL_GPL(memcpy_mcsafe_unrolled)
 	_ASM_EXTABLE_FAULT(.L_copy_leading_bytes, .L_memcpy_mcsafe_fail)
 	_ASM_EXTABLE_FAULT(.L_cache_w0, .L_memcpy_mcsafe_fail)
 	_ASM_EXTABLE_FAULT(.L_cache_w1, .L_memcpy_mcsafe_fail)
-	_ASM_EXTABLE_FAULT(.L_cache_w3, .L_memcpy_mcsafe_fail)
+	_ASM_EXTABLE_FAULT(.L_cache_w2, .L_memcpy_mcsafe_fail)
 	_ASM_EXTABLE_FAULT(.L_cache_w3, .L_memcpy_mcsafe_fail)
 	_ASM_EXTABLE_FAULT(.L_cache_w4, .L_memcpy_mcsafe_fail)
 	_ASM_EXTABLE_FAULT(.L_cache_w5, .L_memcpy_mcsafe_fail)

arch/x86/mm/kaslr.c

@@ -48,7 +48,7 @@ static const unsigned long vaddr_start = __PAGE_OFFSET_BASE;
 #if defined(CONFIG_X86_ESPFIX64)
 static const unsigned long vaddr_end = ESPFIX_BASE_ADDR;
 #elif defined(CONFIG_EFI)
-static const unsigned long vaddr_end = EFI_VA_START;
+static const unsigned long vaddr_end = EFI_VA_END;
 #else
 static const unsigned long vaddr_end = __START_KERNEL_map;
 #endif
@@ -105,7 +105,7 @@ void __init kernel_randomize_memory(void)
 	 */
 	BUILD_BUG_ON(vaddr_start >= vaddr_end);
 	BUILD_BUG_ON(IS_ENABLED(CONFIG_X86_ESPFIX64) &&
-		     vaddr_end >= EFI_VA_START);
+		     vaddr_end >= EFI_VA_END);
 	BUILD_BUG_ON((IS_ENABLED(CONFIG_X86_ESPFIX64) ||
 		      IS_ENABLED(CONFIG_EFI)) &&
 		     vaddr_end >= __START_KERNEL_map);

arch/x86/purgatory/Makefile

@@ -8,6 +8,7 @@ PURGATORY_OBJS = $(addprefix $(obj)/,$(purgatory-y))
 LDFLAGS_purgatory.ro := -e purgatory_start -r --no-undefined -nostdlib -z nodefaultlib
 targets += purgatory.ro
 
+KASAN_SANITIZE	:= n
 KCOV_INSTRUMENT := n
 
 # Default KBUILD_CFLAGS can have -pg option set when FTRACE is enabled. That

block/blk-mq.c

@@ -969,7 +969,7 @@ bool blk_mq_dispatch_rq_list(struct blk_mq_hw_ctx *hctx, struct list_head *list)
 	struct request *rq;
 	LIST_HEAD(driver_list);
 	struct list_head *dptr;
-	int queued, ret = BLK_MQ_RQ_QUEUE_OK;
+	int errors, queued, ret = BLK_MQ_RQ_QUEUE_OK;
 
 	/*
 	 * Start off with dptr being NULL, so we start the first request
@@ -980,7 +980,7 @@ bool blk_mq_dispatch_rq_list(struct blk_mq_hw_ctx *hctx, struct list_head *list)
 	/*
 	 * Now process all the entries, sending them to the driver.
 	 */
-	queued = 0;
+	errors = queued = 0;
 	while (!list_empty(list)) {
 		struct blk_mq_queue_data bd;
 
@@ -1037,6 +1037,7 @@ bool blk_mq_dispatch_rq_list(struct blk_mq_hw_ctx *hctx, struct list_head *list)
 		default:
 			pr_err("blk-mq: bad return on queue: %d\n", ret);
 		case BLK_MQ_RQ_QUEUE_ERROR:
+			errors++;
 			rq->errors = -EIO;
 			blk_mq_end_request(rq, rq->errors);
 			break;
@@ -1088,7 +1089,7 @@ bool blk_mq_dispatch_rq_list(struct blk_mq_hw_ctx *hctx, struct list_head *list)
 			blk_mq_run_hw_queue(hctx, true);
 	}
 
-	return queued != 0;
+	return (queued + errors) != 0;
 }
 
 static void __blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx)

crypto/lrw.c

@@ -286,8 +286,11 @@ static int init_crypt(struct skcipher_request *req, crypto_completion_t done)
 
 	subreq->cryptlen = LRW_BUFFER_SIZE;
 	if (req->cryptlen > LRW_BUFFER_SIZE) {
-		subreq->cryptlen = min(req->cryptlen, (unsigned)PAGE_SIZE);
-		rctx->ext = kmalloc(subreq->cryptlen, gfp);
+		unsigned int n = min(req->cryptlen, (unsigned int)PAGE_SIZE);
+
+		rctx->ext = kmalloc(n, gfp);
+		if (rctx->ext)
+			subreq->cryptlen = n;
 	}
 
 	rctx->src = req->src;

crypto/xts.c

@@ -230,8 +230,11 @@ static int init_crypt(struct skcipher_request *req, crypto_completion_t done)
 
 	subreq->cryptlen = XTS_BUFFER_SIZE;
 	if (req->cryptlen > XTS_BUFFER_SIZE) {
-		subreq->cryptlen = min(req->cryptlen, (unsigned)PAGE_SIZE);
-		rctx->ext = kmalloc(subreq->cryptlen, gfp);
+		unsigned int n = min(req->cryptlen, (unsigned int)PAGE_SIZE);
+
+		rctx->ext = kmalloc(n, gfp);
+		if (rctx->ext)
+			subreq->cryptlen = n;
 	}
 
 	rctx->src = req->src;

drivers/acpi/Makefile

@@ -2,7 +2,6 @@
 # Makefile for the Linux ACPI interpreter
 #
 
-ccflags-y			:= -Os
 ccflags-$(CONFIG_ACPI_DEBUG)	+= -DACPI_DEBUG_OUTPUT
 
 #

drivers/acpi/acpi_platform.c

@@ -25,9 +25,11 @@
 ACPI_MODULE_NAME("platform");
 
 static const struct acpi_device_id forbidden_id_list[] = {
-	{"PNP0000", 0},	/* PIC */
-	{"PNP0100", 0},	/* Timer */
-	{"PNP0200", 0},	/* AT DMA Controller */
+	{"PNP0000",  0},	/* PIC */
+	{"PNP0100",  0},	/* Timer */
+	{"PNP0200",  0},	/* AT DMA Controller */
+	{"ACPI0009", 0},	/* IOxAPIC */
+	{"ACPI000A", 0},	/* IOAPIC */
 	{"", 0},
 };
 

drivers/acpi/apei/ghes.c

@@ -1073,6 +1073,7 @@ static int ghes_remove(struct platform_device *ghes_dev)
 		if (list_empty(&ghes_sci))
 			unregister_acpi_hed_notifier(&ghes_notifier_sci);
 		mutex_unlock(&ghes_list_mutex);
+		synchronize_rcu();
 		break;
 	case ACPI_HEST_NOTIFY_NMI:
 		ghes_nmi_remove(ghes);

drivers/acpi/ioapic.c

@@ -45,6 +45,12 @@ static acpi_status setup_res(struct acpi_resource *acpi_res, void *data)
 	struct resource *res = data;
 	struct resource_win win;
 
+	/*
+	 * We might assign this to 'res' later, make sure all pointers are
+	 * cleared before the resource is added to the global list
+	 */
+	memset(&win, 0, sizeof(win));
+
 	res->flags = 0;
 	if (acpi_dev_filter_resource_type(acpi_res, IORESOURCE_MEM))
 		return AE_OK;

drivers/block/nbd.c

@@ -47,6 +47,8 @@ static DEFINE_MUTEX(nbd_index_mutex);
 struct nbd_sock {
 	struct socket *sock;
 	struct mutex tx_lock;
+	struct request *pending;
+	int sent;
 };
 
 #define NBD_TIMEDOUT			0
@@ -124,7 +126,8 @@ static const char *nbdcmd_to_ascii(int cmd)
 
 static int nbd_size_clear(struct nbd_device *nbd, struct block_device *bdev)
 {
-	bd_set_size(bdev, 0);
+	if (bdev->bd_openers <= 1)
+		bd_set_size(bdev, 0);
 	set_capacity(nbd->disk, 0);
 	kobject_uevent(&nbd_to_dev(nbd)->kobj, KOBJ_CHANGE);
 
@@ -190,7 +193,7 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req,
 
 	dev_err(nbd_to_dev(nbd), "Connection timed out, shutting down connection\n");
 	set_bit(NBD_TIMEDOUT, &nbd->runtime_flags);
-	req->errors++;
+	req->errors = -EIO;
 
 	mutex_lock(&nbd->config_lock);
 	sock_shutdown(nbd);
@@ -202,7 +205,7 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req,
  *  Send or receive packet.
  */
 static int sock_xmit(struct nbd_device *nbd, int index, int send,
-		     struct iov_iter *iter, int msg_flags)
+		     struct iov_iter *iter, int msg_flags, int *sent)
 {
 	struct socket *sock = nbd->socks[index]->sock;
 	int result;
@@ -237,6 +240,8 @@ static int sock_xmit(struct nbd_device *nbd, int index, int send,
 				result = -EPIPE; /* short read */
 			break;
 		}
+		if (sent)
+			*sent += result;
 	} while (msg_data_left(&msg));
 
 	tsk_restore_flags(current, pflags, PF_MEMALLOC);
@@ -248,6 +253,7 @@ static int sock_xmit(struct nbd_device *nbd, int index, int send,
 static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
 {
 	struct request *req = blk_mq_rq_from_pdu(cmd);
+	struct nbd_sock *nsock = nbd->socks[index];
 	int result;
 	struct nbd_request request = {.magic = htonl(NBD_REQUEST_MAGIC)};
 	struct kvec iov = {.iov_base = &request, .iov_len = sizeof(request)};
@@ -256,6 +262,7 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
 	struct bio *bio;
 	u32 type;
 	u32 tag = blk_mq_unique_tag(req);
+	int sent = nsock->sent, skip = 0;
 
 	iov_iter_kvec(&from, WRITE | ITER_KVEC, &iov, 1, sizeof(request));
 
@@ -283,6 +290,17 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
 		return -EIO;
 	}
 
+	/* We did a partial send previously, and we at least sent the whole
+	 * request struct, so just go and send the rest of the pages in the
+	 * request.
+	 */
+	if (sent) {
+		if (sent >= sizeof(request)) {
+			skip = sent - sizeof(request);
+			goto send_pages;
+		}
+		iov_iter_advance(&from, sent);
+	}
 	request.type = htonl(type);
 	if (type != NBD_CMD_FLUSH) {
 		request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9);
@@ -294,15 +312,27 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
 		cmd, nbdcmd_to_ascii(type),
 		(unsigned long long)blk_rq_pos(req) << 9, blk_rq_bytes(req));
 	result = sock_xmit(nbd, index, 1, &from,
-			(type == NBD_CMD_WRITE) ? MSG_MORE : 0);
+			(type == NBD_CMD_WRITE) ? MSG_MORE : 0, &sent);
 	if (result <= 0) {
+		if (result == -ERESTARTSYS) {
+			/* If we havne't sent anything we can just return BUSY,
+			 * however if we have sent something we need to make
+			 * sure we only allow this req to be sent until we are
+			 * completely done.
+			 */
+			if (sent) {
+				nsock->pending = req;
+				nsock->sent = sent;
+			}
+			return BLK_MQ_RQ_QUEUE_BUSY;
+		}
 		dev_err_ratelimited(disk_to_dev(nbd->disk),
 			"Send control failed (result %d)\n", result);
 		return -EIO;
 	}
-
+send_pages:
 	if (type != NBD_CMD_WRITE)
-		return 0;
+		goto out;
 
 	bio = req->bio;
 	while (bio) {
@@ -318,8 +348,25 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
 				cmd, bvec.bv_len);
 			iov_iter_bvec(&from, ITER_BVEC | WRITE,
 				      &bvec, 1, bvec.bv_len);
-			result = sock_xmit(nbd, index, 1, &from, flags);
+			if (skip) {
+				if (skip >= iov_iter_count(&from)) {
+					skip -= iov_iter_count(&from);
+					continue;
+				}
+				iov_iter_advance(&from, skip);
+				skip = 0;
+			}
+			result = sock_xmit(nbd, index, 1, &from, flags, &sent);
 			if (result <= 0) {
+				if (result == -ERESTARTSYS) {
+					/* We've already sent the header, we
+					 * have no choice but to set pending and
+					 * return BUSY.
+					 */
+					nsock->pending = req;
+					nsock->sent = sent;
+					return BLK_MQ_RQ_QUEUE_BUSY;
+				}
 				dev_err(disk_to_dev(nbd->disk),
 					"Send data failed (result %d)\n",
 					result);
@@ -336,6 +383,9 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
 		}
 		bio = next;
 	}
+out:
+	nsock->pending = NULL;
+	nsock->sent = 0;
 	return 0;
 }
 
@@ -353,7 +403,7 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index)
 
 	reply.magic = 0;
 	iov_iter_kvec(&to, READ | ITER_KVEC, &iov, 1, sizeof(reply));
-	result = sock_xmit(nbd, index, 0, &to, MSG_WAITALL);
+	result = sock_xmit(nbd, index, 0, &to, MSG_WAITALL, NULL);
 	if (result <= 0) {
 		if (!test_bit(NBD_DISCONNECTED, &nbd->runtime_flags) &&
 		    !test_bit(NBD_DISCONNECT_REQUESTED, &nbd->runtime_flags))
@@ -383,7 +433,7 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index)
 	if (ntohl(reply.error)) {
 		dev_err(disk_to_dev(nbd->disk), "Other side returned error (%d)\n",
 			ntohl(reply.error));
-		req->errors++;
+		req->errors = -EIO;
 		return cmd;
 	}
 
@@ -395,11 +445,11 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index)
 		rq_for_each_segment(bvec, req, iter) {
 			iov_iter_bvec(&to, ITER_BVEC | READ,
 				      &bvec, 1, bvec.bv_len);
-			result = sock_xmit(nbd, index, 0, &to, MSG_WAITALL);
+			result = sock_xmit(nbd, index, 0, &to, MSG_WAITALL, NULL);
 			if (result <= 0) {
 				dev_err(disk_to_dev(nbd->disk), "Receive data failed (result %d)\n",
 					result);
-				req->errors++;
+				req->errors = -EIO;
 				return cmd;
 			}
 			dev_dbg(nbd_to_dev(nbd), "request %p: got %d bytes data\n",
@@ -469,7 +519,7 @@ static void nbd_clear_req(struct request *req, void *data, bool reserved)
 	if (!blk_mq_request_started(req))
 		return;
 	cmd = blk_mq_rq_to_pdu(req);
-	req->errors++;
+	req->errors = -EIO;
 	nbd_end_request(cmd);
 }
 
@@ -482,22 +532,23 @@ static void nbd_clear_que(struct nbd_device *nbd)
 }
 
 
-static void nbd_handle_cmd(struct nbd_cmd *cmd, int index)
+static int nbd_handle_cmd(struct nbd_cmd *cmd, int index)
 {
 	struct request *req = blk_mq_rq_from_pdu(cmd);
 	struct nbd_device *nbd = cmd->nbd;
 	struct nbd_sock *nsock;
+	int ret;
 
 	if (index >= nbd->num_connections) {
 		dev_err_ratelimited(disk_to_dev(nbd->disk),
 				    "Attempted send on invalid socket\n");
-		goto error_out;
+		return -EINVAL;
 	}
 
 	if (test_bit(NBD_DISCONNECTED, &nbd->runtime_flags)) {
 		dev_err_ratelimited(disk_to_dev(nbd->disk),
 				    "Attempted send on closed socket\n");
-		goto error_out;
+		return -EINVAL;
 	}
 
 	req->errors = 0;
@@ -508,29 +559,30 @@ static void nbd_handle_cmd(struct nbd_cmd *cmd, int index)
 		mutex_unlock(&nsock->tx_lock);
 		dev_err_ratelimited(disk_to_dev(nbd->disk),
 				    "Attempted send on closed socket\n");
-		goto error_out;
+		return -EINVAL;
 	}
 
-	if (nbd_send_cmd(nbd, cmd, index) != 0) {
-		dev_err_ratelimited(disk_to_dev(nbd->disk),
-				    "Request send failed\n");
-		req->errors++;
-		nbd_end_request(cmd);
+	/* Handle the case that we have a pending request that was partially
+	 * transmitted that _has_ to be serviced first.  We need to call requeue
+	 * here so that it gets put _after_ the request that is already on the
+	 * dispatch list.
+	 */
+	if (unlikely(nsock->pending && nsock->pending != req)) {
+		blk_mq_requeue_request(req, true);
+		ret = 0;
+		goto out;
 	}
-
+	ret = nbd_send_cmd(nbd, cmd, index);
+out:
 	mutex_unlock(&nsock->tx_lock);
-
-	return;
-
-error_out:
-	req->errors++;
-	nbd_end_request(cmd);
+	return ret;
 }
 
 static int nbd_queue_rq(struct blk_mq_hw_ctx *hctx,
 			const struct blk_mq_queue_data *bd)
 {
 	struct nbd_cmd *cmd = blk_mq_rq_to_pdu(bd->rq);
+	int ret;
 
 	/*
 	 * Since we look at the bio's to send the request over the network we
@@ -543,10 +595,20 @@ static int nbd_queue_rq(struct blk_mq_hw_ctx *hctx,
 	 */
 	init_completion(&cmd->send_complete);
 	blk_mq_start_request(bd->rq);
-	nbd_handle_cmd(cmd, hctx->queue_num);
+
+	/* We can be called directly from the user space process, which means we
+	 * could possibly have signals pending so our sendmsg will fail.  In
+	 * this case we need to return that we are busy, otherwise error out as
+	 * appropriate.
+	 */
+	ret = nbd_handle_cmd(cmd, hctx->queue_num);
+	if (ret < 0)
+		ret = BLK_MQ_RQ_QUEUE_ERROR;
+	if (!ret)
+		ret = BLK_MQ_RQ_QUEUE_OK;
 	complete(&cmd->send_complete);
 
-	return BLK_MQ_RQ_QUEUE_OK;
+	return ret;
 }
 
 static int nbd_add_socket(struct nbd_device *nbd, struct block_device *bdev,
@@ -581,6 +643,8 @@ static int nbd_add_socket(struct nbd_device *nbd, struct block_device *bdev,
 
 	mutex_init(&nsock->tx_lock);
 	nsock->sock = sock;
+	nsock->pending = NULL;
+	nsock->sent = 0;
 	socks[nbd->num_connections++] = nsock;
 
 	if (max_part)
@@ -602,6 +666,8 @@ static void nbd_reset(struct nbd_device *nbd)
 
 static void nbd_bdev_reset(struct block_device *bdev)
 {
+	if (bdev->bd_openers > 1)
+		return;
 	set_device_ro(bdev, false);
 	bdev->bd_inode->i_size = 0;
 	if (max_part > 0) {
@@ -634,7 +700,7 @@ static void send_disconnects(struct nbd_device *nbd)
 
 	for (i = 0; i < nbd->num_connections; i++) {
 		iov_iter_kvec(&from, WRITE | ITER_KVEC, &iov, 1, sizeof(request));
-		ret = sock_xmit(nbd, i, 1, &from, 0);
+		ret = sock_xmit(nbd, i, 1, &from, 0, NULL);
 		if (ret <= 0)
 			dev_err(disk_to_dev(nbd->disk),
 				"Send disconnect failed %d\n", ret);
@@ -665,7 +731,8 @@ static int nbd_clear_sock(struct nbd_device *nbd, struct block_device *bdev)
 {
 	sock_shutdown(nbd);
 	nbd_clear_que(nbd);
-	kill_bdev(bdev);
+
+	__invalidate_device(bdev, true);
 	nbd_bdev_reset(bdev);
 	/*
 	 * We want to give the run thread a chance to wait for everybody
@@ -781,7 +848,10 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd,
 		nbd_size_set(nbd, bdev, nbd->blksize, arg);
 		return 0;
 	case NBD_SET_TIMEOUT:
-		nbd->tag_set.timeout = arg * HZ;
+		if (arg) {
+			nbd->tag_set.timeout = arg * HZ;
+			blk_queue_rq_timeout(nbd->disk->queue, arg * HZ);
+		}
 		return 0;
 
 	case NBD_SET_FLAGS:

drivers/clocksource/clkevt-probe.c

@@ -17,7 +17,7 @@
 
 #include <linux/init.h>
 #include <linux/of.h>
-#include <linux/clockchip.h>
+#include <linux/clockchips.h>
 
 extern struct of_device_id __clkevt_of_table[];
 

drivers/cpufreq/cpufreq.c

@@ -918,11 +918,19 @@ static struct kobj_type ktype_cpufreq = {
 	.release	= cpufreq_sysfs_release,
 };
 
-static int add_cpu_dev_symlink(struct cpufreq_policy *policy,
-			       struct device *dev)
+static void add_cpu_dev_symlink(struct cpufreq_policy *policy, unsigned int cpu)
 {
+	struct device *dev = get_cpu_device(cpu);
+
+	if (!dev)
+		return;
+
+	if (cpumask_test_and_set_cpu(cpu, policy->real_cpus))
+		return;
+
 	dev_dbg(dev, "%s: Adding symlink\n", __func__);
-	return sysfs_create_link(&dev->kobj, &policy->kobj, "cpufreq");
+	if (sysfs_create_link(&dev->kobj, &policy->kobj, "cpufreq"))
+		dev_err(dev, "cpufreq symlink creation failed\n");
 }
 
 static void remove_cpu_dev_symlink(struct cpufreq_policy *policy,
@@ -1180,10 +1188,10 @@ static int cpufreq_online(unsigned int cpu)
 		policy->user_policy.min = policy->min;
 		policy->user_policy.max = policy->max;
 
-		write_lock_irqsave(&cpufreq_driver_lock, flags);
-		for_each_cpu(j, policy->related_cpus)
+		for_each_cpu(j, policy->related_cpus) {
 			per_cpu(cpufreq_cpu_data, j) = policy;
-		write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+			add_cpu_dev_symlink(policy, j);
+		}
 	} else {
 		policy->min = policy->user_policy.min;
 		policy->max = policy->user_policy.max;
@@ -1275,13 +1283,15 @@ out_exit_policy:
 
 	if (cpufreq_driver->exit)
 		cpufreq_driver->exit(policy);
+
+	for_each_cpu(j, policy->real_cpus)
+		remove_cpu_dev_symlink(policy, get_cpu_device(j));
+
 out_free_policy:
 	cpufreq_policy_free(policy);
 	return ret;
 }
 
-static int cpufreq_offline(unsigned int cpu);
-
 /**
  * cpufreq_add_dev - the cpufreq interface for a CPU device.
  * @dev: CPU device.
@@ -1303,16 +1313,10 @@ static int cpufreq_add_dev(struct device *dev, struct subsys_interface *sif)
 
 	/* Create sysfs link on CPU registration */
 	policy = per_cpu(cpufreq_cpu_data, cpu);
-	if (!policy || cpumask_test_and_set_cpu(cpu, policy->real_cpus))
-		return 0;
+	if (policy)
+		add_cpu_dev_symlink(policy, cpu);
 
-	ret = add_cpu_dev_symlink(policy, dev);
-	if (ret) {
-		cpumask_clear_cpu(cpu, policy->real_cpus);
-		cpufreq_offline(cpu);
-	}
-
-	return ret;
+	return 0;
 }
 
 static int cpufreq_offline(unsigned int cpu)

drivers/cpuidle/cpuidle-powernv.c

@@ -175,6 +175,24 @@ static int powernv_cpuidle_driver_init(void)
 		drv->state_count += 1;
 	}
 
+	/*
+	 * On the PowerNV platform cpu_present may be less than cpu_possible in
+	 * cases when firmware detects the CPU, but it is not available to the
+	 * OS.  If CONFIG_HOTPLUG_CPU=n, then such CPUs are not hotplugable at
+	 * run time and hence cpu_devices are not created for those CPUs by the
+	 * generic topology_init().
+	 *
+	 * drv->cpumask defaults to cpu_possible_mask in
+	 * __cpuidle_driver_init().  This breaks cpuidle on PowerNV where
+	 * cpu_devices are not created for CPUs in cpu_possible_mask that
+	 * cannot be hot-added later at run time.
+	 *
+	 * Trying cpuidle_register_device() on a CPU without a cpu_device is
+	 * incorrect, so pass a correct CPU mask to the generic cpuidle driver.
+	 */
+
+	drv->cpumask = (struct cpumask *)cpu_present_mask;
+
 	return 0;
 }
 

drivers/crypto/ccp/ccp-dev-v5.c

@@ -1015,6 +1015,7 @@ const struct ccp_vdata ccpv5a = {
 
 const struct ccp_vdata ccpv5b = {
 	.version = CCP_VERSION(5, 0),
+	.dma_chan_attr = DMA_PRIVATE,
 	.setup = ccp5other_config,
 	.perform = &ccp5_actions,
 	.bar = 2,

drivers/crypto/ccp/ccp-dev.h

@@ -179,6 +179,10 @@
 
 /* ------------------------ General CCP Defines ------------------------ */
 
+#define	CCP_DMA_DFLT			0x0
+#define	CCP_DMA_PRIV			0x1
+#define	CCP_DMA_PUB			0x2
+
 #define CCP_DMAPOOL_MAX_SIZE		64
 #define CCP_DMAPOOL_ALIGN		BIT(5)
 
@@ -636,6 +640,7 @@ struct ccp_actions {
 /* Structure to hold CCP version-specific values */
 struct ccp_vdata {
 	const unsigned int version;
+	const unsigned int dma_chan_attr;
 	void (*setup)(struct ccp_device *);
 	const struct ccp_actions *perform;
 	const unsigned int bar;

drivers/crypto/ccp/ccp-dmaengine.c

@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/dmaengine.h>
 #include <linux/spinlock.h>
@@ -25,6 +26,37 @@
 	(mask == 0) ? 64 : fls64(mask);	\
 })
 
+/* The CCP as a DMA provider can be configured for public or private
+ * channels. Default is specified in the vdata for the device (PCI ID).
+ * This module parameter will override for all channels on all devices:
+ *   dma_chan_attr = 0x2 to force all channels public
+ *                 = 0x1 to force all channels private
+ *                 = 0x0 to defer to the vdata setting
+ *                 = any other value: warning, revert to 0x0
+ */
+static unsigned int dma_chan_attr = CCP_DMA_DFLT;
+module_param(dma_chan_attr, uint, 0444);
+MODULE_PARM_DESC(dma_chan_attr, "Set DMA channel visibility: 0 (default) = device defaults, 1 = make private, 2 = make public");
+
+unsigned int ccp_get_dma_chan_attr(struct ccp_device *ccp)
+{
+	switch (dma_chan_attr) {
+	case CCP_DMA_DFLT:
+		return ccp->vdata->dma_chan_attr;
+
+	case CCP_DMA_PRIV:
+		return DMA_PRIVATE;
+
+	case CCP_DMA_PUB:
+		return 0;
+
+	default:
+		dev_info_once(ccp->dev, "Invalid value for dma_chan_attr: %d\n",
+			      dma_chan_attr);
+		return ccp->vdata->dma_chan_attr;
+	}
+}
+
 static void ccp_free_cmd_resources(struct ccp_device *ccp,
 				   struct list_head *list)
 {
@@ -675,6 +707,15 @@ int ccp_dmaengine_register(struct ccp_device *ccp)
 	dma_cap_set(DMA_SG, dma_dev->cap_mask);
 	dma_cap_set(DMA_INTERRUPT, dma_dev->cap_mask);
 
+	/* The DMA channels for this device can be set to public or private,
+	 * and overridden by the module parameter dma_chan_attr.
+	 * Default: according to the value in vdata (dma_chan_attr=0)
+	 * dma_chan_attr=0x1: all channels private (override vdata)
+	 * dma_chan_attr=0x2: all channels public (override vdata)
+	 */
+	if (ccp_get_dma_chan_attr(ccp) == DMA_PRIVATE)
+		dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask);
+
 	INIT_LIST_HEAD(&dma_dev->channels);
 	for (i = 0; i < ccp->cmd_q_count; i++) {
 		chan = ccp->ccp_dma_chan + i;

drivers/dma/bcm2835-dma.c

@@ -251,8 +251,11 @@ static void bcm2835_dma_create_cb_set_length(
 	 */
 
 	/* have we filled in period_length yet? */
-	if (*total_len + control_block->length < period_len)
+	if (*total_len + control_block->length < period_len) {
+		/* update number of bytes in this period so far */
+		*total_len += control_block->length;
 		return;
+	}
 
 	/* calculate the length that remains to reach period_length */
 	control_block->length = period_len - *total_len;

drivers/dma/dmaengine.c

@@ -1108,12 +1108,14 @@ static struct dmaengine_unmap_pool *__get_unmap_pool(int nr)
 	switch (order) {
 	case 0 ... 1:
 		return &unmap_pool[0];
+#if IS_ENABLED(CONFIG_DMA_ENGINE_RAID)
 	case 2 ... 4:
 		return &unmap_pool[1];
 	case 5 ... 7:
 		return &unmap_pool[2];
 	case 8:
 		return &unmap_pool[3];
+#endif
 	default:
 		BUG();
 		return NULL;

drivers/edac/Kconfig

@@ -43,6 +43,7 @@ config EDAC_LEGACY_SYSFS
 
 config EDAC_DEBUG
 	bool "Debugging"
+	select DEBUG_FS
 	help
 	  This turns on debugging information for the entire EDAC subsystem.
 	  You do so by inserting edac_module with "edac_debug_level=x." Valid
@@ -259,6 +260,15 @@ config EDAC_SKX
 	  Support for error detection and correction the Intel
 	  Skylake server Integrated Memory Controllers.
 
+config EDAC_PND2
+	tristate "Intel Pondicherry2"
+	depends on EDAC_MM_EDAC && PCI && X86_64 && X86_MCE_INTEL
+	help
+	  Support for error detection and correction on the Intel
+	  Pondicherry2 Integrated Memory Controller. This SoC IP is
+	  first used on the Apollo Lake platform and Denverton
+	  micro-server but may appear on others in the future.
+
 config EDAC_MPC85XX
 	tristate "Freescale MPC83xx / MPC85xx"
 	depends on EDAC_MM_EDAC && FSL_SOC

drivers/edac/Makefile

@@ -32,6 +32,7 @@ obj-$(CONFIG_EDAC_I7300)		+= i7300_edac.o
 obj-$(CONFIG_EDAC_I7CORE)		+= i7core_edac.o
 obj-$(CONFIG_EDAC_SBRIDGE)		+= sb_edac.o
 obj-$(CONFIG_EDAC_SKX)			+= skx_edac.o
+obj-$(CONFIG_EDAC_PND2)			+= pnd2_edac.o
 obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
 obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o
 obj-$(CONFIG_EDAC_I82443BXGX)		+= i82443bxgx_edac.o

drivers/edac/i5000_edac.c

@@ -1293,7 +1293,7 @@ static int i5000_init_csrows(struct mem_ctl_info *mci)
 			dimm->mtype = MEM_FB_DDR2;
 
 			/* ask what device type on this row */
-			if (MTR_DRAM_WIDTH(mtr))
+			if (MTR_DRAM_WIDTH(mtr) == 8)
 				dimm->dtype = DEV_X8;
 			else
 				dimm->dtype = DEV_X4;

drivers/edac/i5400_edac.c

@@ -1207,13 +1207,14 @@ static int i5400_init_dimms(struct mem_ctl_info *mci)
 
 			dimm->nr_pages = size_mb << 8;
 			dimm->grain = 8;
-			dimm->dtype = MTR_DRAM_WIDTH(mtr) ? DEV_X8 : DEV_X4;
+			dimm->dtype = MTR_DRAM_WIDTH(mtr) == 8 ?
+				      DEV_X8 : DEV_X4;
 			dimm->mtype = MEM_FB_DDR2;
 			/*
 			 * The eccc mechanism is SDDC (aka SECC), with
 			 * is similar to Chipkill.
 			 */
-			dimm->edac_mode = MTR_DRAM_WIDTH(mtr) ?
+			dimm->edac_mode = MTR_DRAM_WIDTH(mtr) == 8 ?
 					  EDAC_S8ECD8ED : EDAC_S4ECD4ED;
 			ndimms++;
 		}

drivers/edac/pnd2_edac.c

@@ -0,0 +1,1546 @@
+/*
+ * Driver for Pondicherry2 memory controller.
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * [Derived from sb_edac.c]
+ *
+ * Translation of system physical addresses to DIMM addresses
+ * is a two stage process:
+ *
+ * First the Pondicherry 2 memory controller handles slice and channel interleaving
+ * in "sys2pmi()". This is (almost) completley common between platforms.
+ *
+ * Then a platform specific dunit (DIMM unit) completes the process to provide DIMM,
+ * rank, bank, row and column using the appropriate "dunit_ops" functions/parameters.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/smp.h>
+#include <linux/bitmap.h>
+#include <linux/math64.h>
+#include <linux/mod_devicetable.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/processor.h>
+#include <asm/mce.h>
+
+#include "edac_mc.h"
+#include "edac_module.h"
+#include "pnd2_edac.h"
+
+#define APL_NUM_CHANNELS	4
+#define DNV_NUM_CHANNELS	2
+#define DNV_MAX_DIMMS		2 /* Max DIMMs per channel */
+
+enum type {
+	APL,
+	DNV, /* All requests go to PMI CH0 on each slice (CH1 disabled) */
+};
+
+struct dram_addr {
+	int chan;
+	int dimm;
+	int rank;
+	int bank;
+	int row;
+	int col;
+};
+
+struct pnd2_pvt {
+	int dimm_geom[APL_NUM_CHANNELS];
+	u64 tolm, tohm;
+};
+
+/*
+ * System address space is divided into multiple regions with
+ * different interleave rules in each. The as0/as1 regions
+ * have no interleaving at all. The as2 region is interleaved
+ * between two channels. The mot region is magic and may overlap
+ * other regions, with its interleave rules taking precedence.
+ * Addresses not in any of these regions are interleaved across
+ * all four channels.
+ */
+static struct region {
+	u64	base;
+	u64	limit;
+	u8	enabled;
+} mot, as0, as1, as2;
+
+static struct dunit_ops {
+	char *name;
+	enum type type;
+	int pmiaddr_shift;
+	int pmiidx_shift;
+	int channels;
+	int dimms_per_channel;
+	int (*rd_reg)(int port, int off, int op, void *data, size_t sz, char *name);
+	int (*get_registers)(void);
+	int (*check_ecc)(void);
+	void (*mk_region)(char *name, struct region *rp, void *asym);
+	void (*get_dimm_config)(struct mem_ctl_info *mci);
+	int (*pmi2mem)(struct mem_ctl_info *mci, u64 pmiaddr, u32 pmiidx,
+				   struct dram_addr *daddr, char *msg);
+} *ops;
+
+static struct mem_ctl_info *pnd2_mci;
+
+#define PND2_MSG_SIZE	256
+
+/* Debug macros */
+#define pnd2_printk(level, fmt, arg...)			\
+	edac_printk(level, "pnd2", fmt, ##arg)
+
+#define pnd2_mc_printk(mci, level, fmt, arg...)	\
+	edac_mc_chipset_printk(mci, level, "pnd2", fmt, ##arg)
+
+#define MOT_CHAN_INTLV_BIT_1SLC_2CH 12
+#define MOT_CHAN_INTLV_BIT_2SLC_2CH 13
+#define SELECTOR_DISABLED (-1)
+#define _4GB (1ul << 32)
+
+#define PMI_ADDRESS_WIDTH	31
+#define PND_MAX_PHYS_BIT	39
+
+#define APL_ASYMSHIFT		28
+#define DNV_ASYMSHIFT		31
+#define CH_HASH_MASK_LSB	6
+#define SLICE_HASH_MASK_LSB	6
+#define MOT_SLC_INTLV_BIT	12
+#define LOG2_PMI_ADDR_GRANULARITY	5
+#define MOT_SHIFT	24
+
+#define GET_BITFIELD(v, lo, hi)	(((v) & GENMASK_ULL(hi, lo)) >> (lo))
+#define U64_LSHIFT(val, s)	((u64)(val) << (s))
+
+#ifdef CONFIG_X86_INTEL_SBI_APL
+#include "linux/platform_data/sbi_apl.h"
+int sbi_send(int port, int off, int op, u32 *data)
+{
+	struct sbi_apl_message sbi_arg;
+	int ret, read = 0;
+
+	memset(&sbi_arg, 0, sizeof(sbi_arg));
+
+	if (op == 0 || op == 4 || op == 6)
+		read = 1;
+	else
+		sbi_arg.data = *data;
+
+	sbi_arg.opcode = op;
+	sbi_arg.port_address = port;
+	sbi_arg.register_offset = off;
+	ret = sbi_apl_commit(&sbi_arg);
+	if (ret || sbi_arg.status)
+		edac_dbg(2, "sbi_send status=%d ret=%d data=%x\n",
+				 sbi_arg.status, ret, sbi_arg.data);
+
+	if (ret == 0)
+		ret = sbi_arg.status;
+
+	if (ret == 0 && read)
+		*data = sbi_arg.data;
+
+	return ret;
+}
+#else
+int sbi_send(int port, int off, int op, u32 *data)
+{
+	return -EUNATCH;
+}
+#endif
+
+static int apl_rd_reg(int port, int off, int op, void *data, size_t sz, char *name)
+{
+	int	ret = 0;
+
+	edac_dbg(2, "Read %s port=%x off=%x op=%x\n", name, port, off, op);
+	switch (sz) {
+	case 8:
+		ret = sbi_send(port, off + 4, op, (u32 *)(data + 4));
+	case 4:
+		ret = sbi_send(port, off, op, (u32 *)data);
+		pnd2_printk(KERN_DEBUG, "%s=%x%08x ret=%d\n", name,
+					sz == 8 ? *((u32 *)(data + 4)) : 0, *((u32 *)data), ret);
+		break;
+	}
+
+	return ret;
+}
+
+static u64 get_mem_ctrl_hub_base_addr(void)
+{
+	struct b_cr_mchbar_lo_pci lo;
+	struct b_cr_mchbar_hi_pci hi;
+	struct pci_dev *pdev;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x1980, NULL);
+	if (pdev) {
+		pci_read_config_dword(pdev, 0x48, (u32 *)&lo);
+		pci_read_config_dword(pdev, 0x4c, (u32 *)&hi);
+		pci_dev_put(pdev);
+	} else {
+		return 0;
+	}
+
+	if (!lo.enable) {
+		edac_dbg(2, "MMIO via memory controller hub base address is disabled!\n");
+		return 0;
+	}
+
+	return U64_LSHIFT(hi.base, 32) | U64_LSHIFT(lo.base, 15);
+}
+
+static u64 get_sideband_reg_base_addr(void)
+{
+	struct pci_dev *pdev;
+	u32 hi, lo;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x19dd, NULL);
+	if (pdev) {
+		pci_read_config_dword(pdev, 0x10, &lo);
+		pci_read_config_dword(pdev, 0x14, &hi);
+		pci_dev_put(pdev);
+		return (U64_LSHIFT(hi, 32) | U64_LSHIFT(lo, 0));
+	} else {
+		return 0xfd000000;
+	}
+}
+
+static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *name)
+{
+	struct pci_dev *pdev;
+	char *base;
+	u64 addr;
+
+	if (op == 4) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x1980, NULL);
+		if (!pdev)
+			return -ENODEV;
+
+		pci_read_config_dword(pdev, off, data);
+		pci_dev_put(pdev);
+	} else {
+		/* MMIO via memory controller hub base address */
+		if (op == 0 && port == 0x4c) {
+			addr = get_mem_ctrl_hub_base_addr();
+			if (!addr)
+				return -ENODEV;
+		} else {
+			/* MMIO via sideband register base address */
+			addr = get_sideband_reg_base_addr();
+			if (!addr)
+				return -ENODEV;
+			addr += (port << 16);
+		}
+
+		base = ioremap((resource_size_t)addr, 0x10000);
+		if (!base)
+			return -ENODEV;
+
+		if (sz == 8)
+			*(u32 *)(data + 4) = *(u32 *)(base + off + 4);
+		*(u32 *)data = *(u32 *)(base + off);
+
+		iounmap(base);
+	}
+
+	edac_dbg(2, "Read %s=%.8x_%.8x\n", name,
+			(sz == 8) ? *(u32 *)(data + 4) : 0, *(u32 *)data);
+
+	return 0;
+}
+
+#define RD_REGP(regp, regname, port)	\
+	ops->rd_reg(port,					\
+		regname##_offset,				\
+		regname##_r_opcode,				\
+		regp, sizeof(struct regname),	\
+		#regname)
+
+#define RD_REG(regp, regname)			\
+	ops->rd_reg(regname ## _port,		\
+		regname##_offset,				\
+		regname##_r_opcode,				\
+		regp, sizeof(struct regname),	\
+		#regname)
+
+static u64 top_lm, top_hm;
+static bool two_slices;
+static bool two_channels; /* Both PMI channels in one slice enabled */
+
+static u8 sym_chan_mask;
+static u8 asym_chan_mask;
+static u8 chan_mask;
+
+static int slice_selector = -1;
+static int chan_selector = -1;
+static u64 slice_hash_mask;
+static u64 chan_hash_mask;
+
+static void mk_region(char *name, struct region *rp, u64 base, u64 limit)
+{
+	rp->enabled = 1;
+	rp->base = base;
+	rp->limit = limit;
+	edac_dbg(2, "Region:%s [%llx, %llx]\n", name, base, limit);
+}
+
+static void mk_region_mask(char *name, struct region *rp, u64 base, u64 mask)
+{
+	if (mask == 0) {
+		pr_info(FW_BUG "MOT mask cannot be zero\n");
+		return;
+	}
+	if (mask != GENMASK_ULL(PND_MAX_PHYS_BIT, __ffs(mask))) {
+		pr_info(FW_BUG "MOT mask not power of two\n");
+		return;
+	}
+	if (base & ~mask) {
+		pr_info(FW_BUG "MOT region base/mask alignment error\n");
+		return;
+	}
+	rp->base = base;
+	rp->limit = (base | ~mask) & GENMASK_ULL(PND_MAX_PHYS_BIT, 0);
+	rp->enabled = 1;
+	edac_dbg(2, "Region:%s [%llx, %llx]\n", name, base, rp->limit);
+}
+
+static bool in_region(struct region *rp, u64 addr)
+{
+	if (!rp->enabled)
+		return false;
+
+	return rp->base <= addr && addr <= rp->limit;
+}
+
+static int gen_sym_mask(struct b_cr_slice_channel_hash *p)
+{
+	int mask = 0;
+
+	if (!p->slice_0_mem_disabled)
+		mask |= p->sym_slice0_channel_enabled;
+
+	if (!p->slice_1_disabled)
+		mask |= p->sym_slice1_channel_enabled << 2;
+
+	if (p->ch_1_disabled || p->enable_pmi_dual_data_mode)
+		mask &= 0x5;
+
+	return mask;
+}
+
+static int gen_asym_mask(struct b_cr_slice_channel_hash *p,
+			 struct b_cr_asym_mem_region0_mchbar *as0,
+			 struct b_cr_asym_mem_region1_mchbar *as1,
+			 struct b_cr_asym_2way_mem_region_mchbar *as2way)
+{
+	const int intlv[] = { 0x5, 0xA, 0x3, 0xC };
+	int mask = 0;
+
+	if (as2way->asym_2way_interleave_enable)
+		mask = intlv[as2way->asym_2way_intlv_mode];
+	if (as0->slice0_asym_enable)
+		mask |= (1 << as0->slice0_asym_channel_select);
+	if (as1->slice1_asym_enable)
+		mask |= (4 << as1->slice1_asym_channel_select);
+	if (p->slice_0_mem_disabled)
+		mask &= 0xc;
+	if (p->slice_1_disabled)
+		mask &= 0x3;
+	if (p->ch_1_disabled || p->enable_pmi_dual_data_mode)
+		mask &= 0x5;
+
+	return mask;
+}
+
+static struct b_cr_tolud_pci tolud;
+static struct b_cr_touud_lo_pci touud_lo;
+static struct b_cr_touud_hi_pci touud_hi;
+static struct b_cr_asym_mem_region0_mchbar asym0;
+static struct b_cr_asym_mem_region1_mchbar asym1;
+static struct b_cr_asym_2way_mem_region_mchbar asym_2way;
+static struct b_cr_mot_out_base_mchbar mot_base;
+static struct b_cr_mot_out_mask_mchbar mot_mask;
+static struct b_cr_slice_channel_hash chash;
+
+/* Apollo Lake dunit */
+/*
+ * Validated on board with just two DIMMs in the [0] and [2] positions
+ * in this array. Other port number matches documentation, but caution
+ * advised.
+ */
+static const int apl_dports[APL_NUM_CHANNELS] = { 0x18, 0x10, 0x11, 0x19 };
+static struct d_cr_drp0 drp0[APL_NUM_CHANNELS];
+
+/* Denverton dunit */
+static const int dnv_dports[DNV_NUM_CHANNELS] = { 0x10, 0x12 };
+static struct d_cr_dsch dsch;
+static struct d_cr_ecc_ctrl ecc_ctrl[DNV_NUM_CHANNELS];
+static struct d_cr_drp drp[DNV_NUM_CHANNELS];
+static struct d_cr_dmap dmap[DNV_NUM_CHANNELS];
+static struct d_cr_dmap1 dmap1[DNV_NUM_CHANNELS];
+static struct d_cr_dmap2 dmap2[DNV_NUM_CHANNELS];
+static struct d_cr_dmap3 dmap3[DNV_NUM_CHANNELS];
+static struct d_cr_dmap4 dmap4[DNV_NUM_CHANNELS];
+static struct d_cr_dmap5 dmap5[DNV_NUM_CHANNELS];
+
+static void apl_mk_region(char *name, struct region *rp, void *asym)
+{
+	struct b_cr_asym_mem_region0_mchbar *a = asym;
+
+	mk_region(name, rp,
+			  U64_LSHIFT(a->slice0_asym_base, APL_ASYMSHIFT),
+			  U64_LSHIFT(a->slice0_asym_limit, APL_ASYMSHIFT) +
+			  GENMASK_ULL(APL_ASYMSHIFT - 1, 0));
+}
+
+static void dnv_mk_region(char *name, struct region *rp, void *asym)
+{
+	struct b_cr_asym_mem_region_denverton *a = asym;
+
+	mk_region(name, rp,
+			  U64_LSHIFT(a->slice_asym_base, DNV_ASYMSHIFT),
+			  U64_LSHIFT(a->slice_asym_limit, DNV_ASYMSHIFT) +
+			  GENMASK_ULL(DNV_ASYMSHIFT - 1, 0));
+}
+
+static int apl_get_registers(void)
+{
+	int i;
+
+	if (RD_REG(&asym_2way, b_cr_asym_2way_mem_region_mchbar))
+		return -ENODEV;
+
+	for (i = 0; i < APL_NUM_CHANNELS; i++)
+		if (RD_REGP(&drp0[i], d_cr_drp0, apl_dports[i]))
+			return -ENODEV;
+
+	return 0;
+}
+
+static int dnv_get_registers(void)
+{
+	int i;
+
+	if (RD_REG(&dsch, d_cr_dsch))
+		return -ENODEV;
+
+	for (i = 0; i < DNV_NUM_CHANNELS; i++)
+		if (RD_REGP(&ecc_ctrl[i], d_cr_ecc_ctrl, dnv_dports[i]) ||
+			RD_REGP(&drp[i], d_cr_drp, dnv_dports[i]) ||
+			RD_REGP(&dmap[i], d_cr_dmap, dnv_dports[i]) ||
+			RD_REGP(&dmap1[i], d_cr_dmap1, dnv_dports[i]) ||
+			RD_REGP(&dmap2[i], d_cr_dmap2, dnv_dports[i]) ||
+			RD_REGP(&dmap3[i], d_cr_dmap3, dnv_dports[i]) ||
+			RD_REGP(&dmap4[i], d_cr_dmap4, dnv_dports[i]) ||
+			RD_REGP(&dmap5[i], d_cr_dmap5, dnv_dports[i]))
+			return -ENODEV;
+
+	return 0;
+}
+
+/*
+ * Read all the h/w config registers once here (they don't
+ * change at run time. Figure out which address ranges have
+ * which interleave characteristics.
+ */
+static int get_registers(void)
+{
+	const int intlv[] = { 10, 11, 12, 12 };
+
+	if (RD_REG(&tolud, b_cr_tolud_pci) ||
+		RD_REG(&touud_lo, b_cr_touud_lo_pci) ||
+		RD_REG(&touud_hi, b_cr_touud_hi_pci) ||
+		RD_REG(&asym0, b_cr_asym_mem_region0_mchbar) ||
+		RD_REG(&asym1, b_cr_asym_mem_region1_mchbar) ||
+		RD_REG(&mot_base, b_cr_mot_out_base_mchbar) ||
+		RD_REG(&mot_mask, b_cr_mot_out_mask_mchbar) ||
+		RD_REG(&chash, b_cr_slice_channel_hash))
+		return -ENODEV;
+
+	if (ops->get_registers())
+		return -ENODEV;
+
+	if (ops->type == DNV) {
+		/* PMI channel idx (always 0) for asymmetric region */
+		asym0.slice0_asym_channel_select = 0;
+		asym1.slice1_asym_channel_select = 0;
+		/* PMI channel bitmap (always 1) for symmetric region */
+		chash.sym_slice0_channel_enabled = 0x1;
+		chash.sym_slice1_channel_enabled = 0x1;
+	}
+
+	if (asym0.slice0_asym_enable)
+		ops->mk_region("as0", &as0, &asym0);
+
+	if (asym1.slice1_asym_enable)
+		ops->mk_region("as1", &as1, &asym1);
+
+	if (asym_2way.asym_2way_interleave_enable) {
+		mk_region("as2way", &as2,
+				  U64_LSHIFT(asym_2way.asym_2way_base, APL_ASYMSHIFT),
+				  U64_LSHIFT(asym_2way.asym_2way_limit, APL_ASYMSHIFT) +
+				  GENMASK_ULL(APL_ASYMSHIFT - 1, 0));
+	}
+
+	if (mot_base.imr_en) {
+		mk_region_mask("mot", &mot,
+					   U64_LSHIFT(mot_base.mot_out_base, MOT_SHIFT),
+					   U64_LSHIFT(mot_mask.mot_out_mask, MOT_SHIFT));
+	}
+
+	top_lm = U64_LSHIFT(tolud.tolud, 20);
+	top_hm = U64_LSHIFT(touud_hi.touud, 32) | U64_LSHIFT(touud_lo.touud, 20);
+
+	two_slices = !chash.slice_1_disabled &&
+				 !chash.slice_0_mem_disabled &&
+				 (chash.sym_slice0_channel_enabled != 0) &&
+				 (chash.sym_slice1_channel_enabled != 0);
+	two_channels = !chash.ch_1_disabled &&
+				 !chash.enable_pmi_dual_data_mode &&
+				 ((chash.sym_slice0_channel_enabled == 3) ||
+				 (chash.sym_slice1_channel_enabled == 3));
+
+	sym_chan_mask = gen_sym_mask(&chash);
+	asym_chan_mask = gen_asym_mask(&chash, &asym0, &asym1, &asym_2way);
+	chan_mask = sym_chan_mask | asym_chan_mask;
+
+	if (two_slices && !two_channels) {
+		if (chash.hvm_mode)
+			slice_selector = 29;
+		else
+			slice_selector = intlv[chash.interleave_mode];
+	} else if (!two_slices && two_channels) {
+		if (chash.hvm_mode)
+			chan_selector = 29;
+		else
+			chan_selector = intlv[chash.interleave_mode];
+	} else if (two_slices && two_channels) {
+		if (chash.hvm_mode) {
+			slice_selector = 29;
+			chan_selector = 30;
+		} else {
+			slice_selector = intlv[chash.interleave_mode];
+			chan_selector = intlv[chash.interleave_mode] + 1;
+		}
+	}
+
+	if (two_slices) {
+		if (!chash.hvm_mode)
+			slice_hash_mask = chash.slice_hash_mask << SLICE_HASH_MASK_LSB;
+		if (!two_channels)
+			slice_hash_mask |= BIT_ULL(slice_selector);
+	}
+
+	if (two_channels) {
+		if (!chash.hvm_mode)
+			chan_hash_mask = chash.ch_hash_mask << CH_HASH_MASK_LSB;
+		if (!two_slices)
+			chan_hash_mask |= BIT_ULL(chan_selector);
+	}
+
+	return 0;
+}
+
+/* Get a contiguous memory address (remove the MMIO gap) */
+static u64 remove_mmio_gap(u64 sys)
+{
+	return (sys < _4GB) ? sys : sys - (_4GB - top_lm);
+}
+
+/* Squeeze out one address bit, shift upper part down to fill gap */
+static void remove_addr_bit(u64 *addr, int bitidx)
+{
+	u64	mask;
+
+	if (bitidx == -1)
+		return;
+
+	mask = (1ull << bitidx) - 1;
+	*addr = ((*addr >> 1) & ~mask) | (*addr & mask);
+}
+
+/* XOR all the bits from addr specified in mask */
+static int hash_by_mask(u64 addr, u64 mask)
+{
+	u64 result = addr & mask;
+
+	result = (result >> 32) ^ result;
+	result = (result >> 16) ^ result;
+	result = (result >> 8) ^ result;
+	result = (result >> 4) ^ result;
+	result = (result >> 2) ^ result;
+	result = (result >> 1) ^ result;
+
+	return (int)result & 1;
+}
+
+/*
+ * First stage decode. Take the system address and figure out which
+ * second stage will deal with it based on interleave modes.
+ */
+static int sys2pmi(const u64 addr, u32 *pmiidx, u64 *pmiaddr, char *msg)
+{
+	u64 contig_addr, contig_base, contig_offset, contig_base_adj;
+	int mot_intlv_bit = two_slices ? MOT_CHAN_INTLV_BIT_2SLC_2CH :
+						MOT_CHAN_INTLV_BIT_1SLC_2CH;
+	int slice_intlv_bit_rm = SELECTOR_DISABLED;
+	int chan_intlv_bit_rm = SELECTOR_DISABLED;
+	/* Determine if address is in the MOT region. */
+	bool mot_hit = in_region(&mot, addr);
+	/* Calculate the number of symmetric regions enabled. */
+	int sym_channels = hweight8(sym_chan_mask);
+
+	/*
+	 * The amount we need to shift the asym base can be determined by the
+	 * number of enabled symmetric channels.
+	 * NOTE: This can only work because symmetric memory is not supposed
+	 * to do a 3-way interleave.
+	 */
+	int sym_chan_shift = sym_channels >> 1;
+
+	/* Give up if address is out of range, or in MMIO gap */
+	if (addr >= (1ul << PND_MAX_PHYS_BIT) ||
+	   (addr >= top_lm && addr < _4GB) || addr >= top_hm) {
+		snprintf(msg, PND2_MSG_SIZE, "Error address 0x%llx is not DRAM", addr);
+		return -EINVAL;
+	}
+
+	/* Get a contiguous memory address (remove the MMIO gap) */
+	contig_addr = remove_mmio_gap(addr);
+
+	if (in_region(&as0, addr)) {
+		*pmiidx = asym0.slice0_asym_channel_select;
+
+		contig_base = remove_mmio_gap(as0.base);
+		contig_offset = contig_addr - contig_base;
+		contig_base_adj = (contig_base >> sym_chan_shift) *
+						  ((chash.sym_slice0_channel_enabled >> (*pmiidx & 1)) & 1);
+		contig_addr = contig_offset + ((sym_channels > 0) ? contig_base_adj : 0ull);
+	} else if (in_region(&as1, addr)) {
+		*pmiidx = 2u + asym1.slice1_asym_channel_select;
+
+		contig_base = remove_mmio_gap(as1.base);
+		contig_offset = contig_addr - contig_base;
+		contig_base_adj = (contig_base >> sym_chan_shift) *
+						  ((chash.sym_slice1_channel_enabled >> (*pmiidx & 1)) & 1);
+		contig_addr = contig_offset + ((sym_channels > 0) ? contig_base_adj : 0ull);
+	} else if (in_region(&as2, addr) && (asym_2way.asym_2way_intlv_mode == 0x3ul)) {
+		bool channel1;
+
+		mot_intlv_bit = MOT_CHAN_INTLV_BIT_1SLC_2CH;
+		*pmiidx = (asym_2way.asym_2way_intlv_mode & 1) << 1;
+		channel1 = mot_hit ? ((bool)((addr >> mot_intlv_bit) & 1)) :
+			hash_by_mask(contig_addr, chan_hash_mask);
+		*pmiidx |= (u32)channel1;
+
+		contig_base = remove_mmio_gap(as2.base);
+		chan_intlv_bit_rm = mot_hit ? mot_intlv_bit : chan_selector;
+		contig_offset = contig_addr - contig_base;
+		remove_addr_bit(&contig_offset, chan_intlv_bit_rm);
+		contig_addr = (contig_base >> sym_chan_shift) + contig_offset;
+	} else {
+		/* Otherwise we're in normal, boring symmetric mode. */
+		*pmiidx = 0u;
+
+		if (two_slices) {
+			bool slice1;
+
+			if (mot_hit) {
+				slice_intlv_bit_rm = MOT_SLC_INTLV_BIT;
+				slice1 = (addr >> MOT_SLC_INTLV_BIT) & 1;
+			} else {
+				slice_intlv_bit_rm = slice_selector;
+				slice1 = hash_by_mask(addr, slice_hash_mask);
+			}
+
+			*pmiidx = (u32)slice1 << 1;
+		}
+
+		if (two_channels) {
+			bool channel1;
+
+			mot_intlv_bit = two_slices ? MOT_CHAN_INTLV_BIT_2SLC_2CH :
+							MOT_CHAN_INTLV_BIT_1SLC_2CH;
+
+			if (mot_hit) {
+				chan_intlv_bit_rm = mot_intlv_bit;
+				channel1 = (addr >> mot_intlv_bit) & 1;
+			} else {
+				chan_intlv_bit_rm = chan_selector;
+				channel1 = hash_by_mask(contig_addr, chan_hash_mask);
+			}
+
+			*pmiidx |= (u32)channel1;
+		}
+	}
+
+	/* Remove the chan_selector bit first */
+	remove_addr_bit(&contig_addr, chan_intlv_bit_rm);
+	/* Remove the slice bit (we remove it second because it must be lower */
+	remove_addr_bit(&contig_addr, slice_intlv_bit_rm);
+	*pmiaddr = contig_addr;
+
+	return 0;
+}
+
+/* Translate PMI address to memory (rank, row, bank, column) */
+#define C(n) (0x10 | (n))	/* column */
+#define B(n) (0x20 | (n))	/* bank */
+#define R(n) (0x40 | (n))	/* row */
+#define RS   (0x80)			/* rank */
+
+/* addrdec values */
+#define AMAP_1KB	0
+#define AMAP_2KB	1
+#define AMAP_4KB	2
+#define AMAP_RSVD	3
+
+/* dden values */
+#define DEN_4Gb		0
+#define DEN_8Gb		2
+
+/* dwid values */
+#define X8		0
+#define X16		1
+
+static struct dimm_geometry {
+	u8	addrdec;
+	u8	dden;
+	u8	dwid;
+	u8	rowbits, colbits;
+	u16	bits[PMI_ADDRESS_WIDTH];
+} dimms[] = {
+	{
+		.addrdec = AMAP_1KB, .dden = DEN_4Gb, .dwid = X16,
+		.rowbits = 15, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  B(0),  B(1),  B(2),  R(0),
+			R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),  R(9),
+			R(10), C(7),  C(8),  C(9),  R(11), RS,    R(12), R(13), R(14),
+			0,     0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_1KB, .dden = DEN_4Gb, .dwid = X8,
+		.rowbits = 16, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  B(0),  B(1),  B(2),  R(0),
+			R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),  R(9),
+			R(10), C(7),  C(8),  C(9),  R(11), RS,    R(12), R(13), R(14),
+			R(15), 0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_1KB, .dden = DEN_8Gb, .dwid = X16,
+		.rowbits = 16, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  B(0),  B(1),  B(2),  R(0),
+			R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),  R(9),
+			R(10), C(7),  C(8),  C(9),  R(11), RS,    R(12), R(13), R(14),
+			R(15), 0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_1KB, .dden = DEN_8Gb, .dwid = X8,
+		.rowbits = 16, .colbits = 11,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  B(0),  B(1),  B(2),  R(0),
+			R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),  R(9),
+			R(10), C(7),  C(8),  C(9),  R(11), RS,    C(11), R(12), R(13),
+			R(14), R(15), 0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_2KB, .dden = DEN_4Gb, .dwid = X16,
+		.rowbits = 15, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  B(0),  B(1),  B(2),
+			R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),
+			R(9),  R(10), C(8),  C(9),  R(11), RS,    R(12), R(13), R(14),
+			0,     0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_2KB, .dden = DEN_4Gb, .dwid = X8,
+		.rowbits = 16, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  B(0),  B(1),  B(2),
+			R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),
+			R(9),  R(10), C(8),  C(9),  R(11), RS,    R(12), R(13), R(14),
+			R(15), 0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_2KB, .dden = DEN_8Gb, .dwid = X16,
+		.rowbits = 16, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  B(0),  B(1),  B(2),
+			R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),
+			R(9),  R(10), C(8),  C(9),  R(11), RS,    R(12), R(13), R(14),
+			R(15), 0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_2KB, .dden = DEN_8Gb, .dwid = X8,
+		.rowbits = 16, .colbits = 11,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  B(0),  B(1),  B(2),
+			R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),
+			R(9),  R(10), C(8),  C(9),  R(11), RS,    C(11), R(12), R(13),
+			R(14), R(15), 0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_4KB, .dden = DEN_4Gb, .dwid = X16,
+		.rowbits = 15, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  C(8),  B(0),  B(1),
+			B(2),  R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),
+			R(8),  R(9),  R(10), C(9),  R(11), RS,    R(12), R(13), R(14),
+			0,     0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_4KB, .dden = DEN_4Gb, .dwid = X8,
+		.rowbits = 16, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  C(8),  B(0),  B(1),
+			B(2),  R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),
+			R(8),  R(9),  R(10), C(9),  R(11), RS,    R(12), R(13), R(14),
+			R(15), 0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_4KB, .dden = DEN_8Gb, .dwid = X16,
+		.rowbits = 16, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  C(8),  B(0),  B(1),
+			B(2),  R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),
+			R(8),  R(9),  R(10), C(9),  R(11), RS,    R(12), R(13), R(14),
+			R(15), 0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_4KB, .dden = DEN_8Gb, .dwid = X8,
+		.rowbits = 16, .colbits = 11,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  C(8),  B(0),  B(1),
+			B(2),  R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),
+			R(8),  R(9),  R(10), C(9),  R(11), RS,    C(11), R(12), R(13),
+			R(14), R(15), 0,     0
+		}
+	}
+};
+
+static int bank_hash(u64 pmiaddr, int idx, int shft)
+{
+	int bhash = 0;
+
+	switch (idx) {
+	case 0:
+		bhash ^= ((pmiaddr >> (12 + shft)) ^ (pmiaddr >> (9 + shft))) & 1;
+		break;
+	case 1:
+		bhash ^= (((pmiaddr >> (10 + shft)) ^ (pmiaddr >> (8 + shft))) & 1) << 1;
+		bhash ^= ((pmiaddr >> 22) & 1) << 1;
+		break;
+	case 2:
+		bhash ^= (((pmiaddr >> (13 + shft)) ^ (pmiaddr >> (11 + shft))) & 1) << 2;
+		break;
+	}
+
+	return bhash;
+}
+
+static int rank_hash(u64 pmiaddr)
+{
+	return ((pmiaddr >> 16) ^ (pmiaddr >> 10)) & 1;
+}
+
+/* Second stage decode. Compute rank, bank, row & column. */
+static int apl_pmi2mem(struct mem_ctl_info *mci, u64 pmiaddr, u32 pmiidx,
+		       struct dram_addr *daddr, char *msg)
+{
+	struct d_cr_drp0 *cr_drp0 = &drp0[pmiidx];
+	struct pnd2_pvt *pvt = mci->pvt_info;
+	int g = pvt->dimm_geom[pmiidx];
+	struct dimm_geometry *d = &dimms[g];
+	int column = 0, bank = 0, row = 0, rank = 0;
+	int i, idx, type, skiprs = 0;
+
+	for (i = 0; i < PMI_ADDRESS_WIDTH; i++) {
+		int	bit = (pmiaddr >> i) & 1;
+
+		if (i + skiprs >= PMI_ADDRESS_WIDTH) {
+			snprintf(msg, PND2_MSG_SIZE, "Bad dimm_geometry[] table\n");
+			return -EINVAL;
+		}
+
+		type = d->bits[i + skiprs] & ~0xf;
+		idx = d->bits[i + skiprs] & 0xf;
+
+		/*
+		 * On single rank DIMMs ignore the rank select bit
+		 * and shift remainder of "bits[]" down one place.
+		 */
+		if (type == RS && (cr_drp0->rken0 + cr_drp0->rken1) == 1) {
+			skiprs = 1;
+			type = d->bits[i + skiprs] & ~0xf;
+			idx = d->bits[i + skiprs] & 0xf;
+		}
+
+		switch (type) {
+		case C(0):
+			column |= (bit << idx);
+			break;
+		case B(0):
+			bank |= (bit << idx);
+			if (cr_drp0->bahen)
+				bank ^= bank_hash(pmiaddr, idx, d->addrdec);
+			break;
+		case R(0):
+			row |= (bit << idx);
+			break;
+		case RS:
+			rank = bit;
+			if (cr_drp0->rsien)
+				rank ^= rank_hash(pmiaddr);
+			break;
+		default:
+			if (bit) {
+				snprintf(msg, PND2_MSG_SIZE, "Bad translation\n");
+				return -EINVAL;
+			}
+			goto done;
+		}
+	}
+
+done:
+	daddr->col = column;
+	daddr->bank = bank;
+	daddr->row = row;
+	daddr->rank = rank;
+	daddr->dimm = 0;
+
+	return 0;
+}
+
+/* Pluck bit "in" from pmiaddr and return value shifted to bit "out" */
+#define dnv_get_bit(pmi, in, out) ((int)(((pmi) >> (in)) & 1u) << (out))
+
+static int dnv_pmi2mem(struct mem_ctl_info *mci, u64 pmiaddr, u32 pmiidx,
+					   struct dram_addr *daddr, char *msg)
+{
+	/* Rank 0 or 1 */
+	daddr->rank = dnv_get_bit(pmiaddr, dmap[pmiidx].rs0 + 13, 0);
+	/* Rank 2 or 3 */
+	daddr->rank |= dnv_get_bit(pmiaddr, dmap[pmiidx].rs1 + 13, 1);
+
+	/*
+	 * Normally ranks 0,1 are DIMM0, and 2,3 are DIMM1, but we
+	 * flip them if DIMM1 is larger than DIMM0.
+	 */
+	daddr->dimm = (daddr->rank >= 2) ^ drp[pmiidx].dimmflip;
+
+	daddr->bank = dnv_get_bit(pmiaddr, dmap[pmiidx].ba0 + 6, 0);
+	daddr->bank |= dnv_get_bit(pmiaddr, dmap[pmiidx].ba1 + 6, 1);
+	daddr->bank |= dnv_get_bit(pmiaddr, dmap[pmiidx].bg0 + 6, 2);
+	if (dsch.ddr4en)
+		daddr->bank |= dnv_get_bit(pmiaddr, dmap[pmiidx].bg1 + 6, 3);
+	if (dmap1[pmiidx].bxor) {
+		if (dsch.ddr4en) {
+			daddr->bank ^= dnv_get_bit(pmiaddr, dmap3[pmiidx].row6 + 6, 0);
+			daddr->bank ^= dnv_get_bit(pmiaddr, dmap3[pmiidx].row7 + 6, 1);
+			if (dsch.chan_width == 0)
+				/* 64/72 bit dram channel width */
+				daddr->bank ^= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca3 + 6, 2);
+			else
+				/* 32/40 bit dram channel width */
+				daddr->bank ^= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca4 + 6, 2);
+			daddr->bank ^= dnv_get_bit(pmiaddr, dmap2[pmiidx].row2 + 6, 3);
+		} else {
+			daddr->bank ^= dnv_get_bit(pmiaddr, dmap2[pmiidx].row2 + 6, 0);
+			daddr->bank ^= dnv_get_bit(pmiaddr, dmap3[pmiidx].row6 + 6, 1);
+			if (dsch.chan_width == 0)
+				daddr->bank ^= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca3 + 6, 2);
+			else
+				daddr->bank ^= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca4 + 6, 2);
+		}
+	}
+
+	daddr->row = dnv_get_bit(pmiaddr, dmap2[pmiidx].row0 + 6, 0);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row1 + 6, 1);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row2 + 6, 2);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row3 + 6, 3);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row4 + 6, 4);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row5 + 6, 5);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row6 + 6, 6);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row7 + 6, 7);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row8 + 6, 8);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row9 + 6, 9);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row10 + 6, 10);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row11 + 6, 11);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row12 + 6, 12);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row13 + 6, 13);
+	if (dmap4[pmiidx].row14 != 31)
+		daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row14 + 6, 14);
+	if (dmap4[pmiidx].row15 != 31)
+		daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row15 + 6, 15);
+	if (dmap4[pmiidx].row16 != 31)
+		daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row16 + 6, 16);
+	if (dmap4[pmiidx].row17 != 31)
+		daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row17 + 6, 17);
+
+	daddr->col = dnv_get_bit(pmiaddr, dmap5[pmiidx].ca3 + 6, 3);
+	daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca4 + 6, 4);
+	daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca5 + 6, 5);
+	daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca6 + 6, 6);
+	daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca7 + 6, 7);
+	daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca8 + 6, 8);
+	daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca9 + 6, 9);
+	if (!dsch.ddr4en && dmap1[pmiidx].ca11 != 0x3f)
+		daddr->col |= dnv_get_bit(pmiaddr, dmap1[pmiidx].ca11 + 13, 11);
+
+	return 0;
+}
+
+static int check_channel(int ch)
+{
+	if (drp0[ch].dramtype != 0) {
+		pnd2_printk(KERN_INFO, "Unsupported DIMM in channel %d\n", ch);
+		return 1;
+	} else if (drp0[ch].eccen == 0) {
+		pnd2_printk(KERN_INFO, "ECC disabled on channel %d\n", ch);
+		return 1;
+	}
+	return 0;
+}
+
+static int apl_check_ecc_active(void)
+{
+	int	i, ret = 0;
+
+	/* Check dramtype and ECC mode for each present DIMM */
+	for (i = 0; i < APL_NUM_CHANNELS; i++)
+		if (chan_mask & BIT(i))
+			ret += check_channel(i);
+	return ret ? -EINVAL : 0;
+}
+
+#define DIMMS_PRESENT(d) ((d)->rken0 + (d)->rken1 + (d)->rken2 + (d)->rken3)
+
+static int check_unit(int ch)
+{
+	struct d_cr_drp *d = &drp[ch];
+
+	if (DIMMS_PRESENT(d) && !ecc_ctrl[ch].eccen) {
+		pnd2_printk(KERN_INFO, "ECC disabled on channel %d\n", ch);
+		return 1;
+	}
+	return 0;
+}
+
+static int dnv_check_ecc_active(void)
+{
+	int	i, ret = 0;
+
+	for (i = 0; i < DNV_NUM_CHANNELS; i++)
+		ret += check_unit(i);
+	return ret ? -EINVAL : 0;
+}
+
+static int get_memory_error_data(struct mem_ctl_info *mci, u64 addr,
+								 struct dram_addr *daddr, char *msg)
+{
+	u64	pmiaddr;
+	u32	pmiidx;
+	int	ret;
+
+	ret = sys2pmi(addr, &pmiidx, &pmiaddr, msg);
+	if (ret)
+		return ret;
+
+	pmiaddr >>= ops->pmiaddr_shift;
+	/* pmi channel idx to dimm channel idx */
+	pmiidx >>= ops->pmiidx_shift;
+	daddr->chan = pmiidx;
+
+	ret = ops->pmi2mem(mci, pmiaddr, pmiidx, daddr, msg);
+	if (ret)
+		return ret;
+
+	edac_dbg(0, "SysAddr=%llx PmiAddr=%llx Channel=%d DIMM=%d Rank=%d Bank=%d Row=%d Column=%d\n",
+			 addr, pmiaddr, daddr->chan, daddr->dimm, daddr->rank, daddr->bank, daddr->row, daddr->col);
+
+	return 0;
+}
+
+static void pnd2_mce_output_error(struct mem_ctl_info *mci, const struct mce *m,
+				  struct dram_addr *daddr)
+{
+	enum hw_event_mc_err_type tp_event;
+	char *optype, msg[PND2_MSG_SIZE];
+	bool ripv = m->mcgstatus & MCG_STATUS_RIPV;
+	bool overflow = m->status & MCI_STATUS_OVER;
+	bool uc_err = m->status & MCI_STATUS_UC;
+	bool recov = m->status & MCI_STATUS_S;
+	u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
+	u32 mscod = GET_BITFIELD(m->status, 16, 31);
+	u32 errcode = GET_BITFIELD(m->status, 0, 15);
+	u32 optypenum = GET_BITFIELD(m->status, 4, 6);
+	int rc;
+
+	tp_event = uc_err ? (ripv ? HW_EVENT_ERR_FATAL : HW_EVENT_ERR_UNCORRECTED) :
+						 HW_EVENT_ERR_CORRECTED;
+
+	/*
+	 * According with Table 15-9 of the Intel Architecture spec vol 3A,
+	 * memory errors should fit in this mask:
+	 *	000f 0000 1mmm cccc (binary)
+	 * where:
+	 *	f = Correction Report Filtering Bit. If 1, subsequent errors
+	 *	    won't be shown
+	 *	mmm = error type
+	 *	cccc = channel
+	 * If the mask doesn't match, report an error to the parsing logic
+	 */
+	if (!((errcode & 0xef80) == 0x80)) {
+		optype = "Can't parse: it is not a mem";
+	} else {
+		switch (optypenum) {
+		case 0:
+			optype = "generic undef request error";
+			break;
+		case 1:
+			optype = "memory read error";
+			break;
+		case 2:
+			optype = "memory write error";
+			break;
+		case 3:
+			optype = "addr/cmd error";
+			break;
+		case 4:
+			optype = "memory scrubbing error";
+			break;
+		default:
+			optype = "reserved";
+			break;
+		}
+	}
+
+	/* Only decode errors with an valid address (ADDRV) */
+	if (!(m->status & MCI_STATUS_ADDRV))
+		return;
+
+	rc = get_memory_error_data(mci, m->addr, daddr, msg);
+	if (rc)
+		goto address_error;
+
+	snprintf(msg, sizeof(msg),
+		 "%s%s err_code:%04x:%04x channel:%d DIMM:%d rank:%d row:%d bank:%d col:%d",
+		 overflow ? " OVERFLOW" : "", (uc_err && recov) ? " recoverable" : "", mscod,
+		 errcode, daddr->chan, daddr->dimm, daddr->rank, daddr->row, daddr->bank, daddr->col);
+
+	edac_dbg(0, "%s\n", msg);
+
+	/* Call the helper to output message */
+	edac_mc_handle_error(tp_event, mci, core_err_cnt, m->addr >> PAGE_SHIFT,
+						 m->addr & ~PAGE_MASK, 0, daddr->chan, daddr->dimm, -1, optype, msg);
+
+	return;
+
+address_error:
+	edac_mc_handle_error(tp_event, mci, core_err_cnt, 0, 0, 0, -1, -1, -1, msg, "");
+}
+
+static void apl_get_dimm_config(struct mem_ctl_info *mci)
+{
+	struct pnd2_pvt	*pvt = mci->pvt_info;
+	struct dimm_info *dimm;
+	struct d_cr_drp0 *d;
+	u64	capacity;
+	int	i, g;
+
+	for (i = 0; i < APL_NUM_CHANNELS; i++) {
+		if (!(chan_mask & BIT(i)))
+			continue;
+
+		dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, i, 0, 0);
+		if (!dimm) {
+			edac_dbg(0, "No allocated DIMM for channel %d\n", i);
+			continue;
+		}
+
+		d = &drp0[i];
+		for (g = 0; g < ARRAY_SIZE(dimms); g++)
+			if (dimms[g].addrdec == d->addrdec &&
+			    dimms[g].dden == d->dden &&
+			    dimms[g].dwid == d->dwid)
+				break;
+
+		if (g == ARRAY_SIZE(dimms)) {
+			edac_dbg(0, "Channel %d: unrecognized DIMM\n", i);
+			continue;
+		}
+
+		pvt->dimm_geom[i] = g;
+		capacity = (d->rken0 + d->rken1) * 8 * (1ul << dimms[g].rowbits) *
+				   (1ul << dimms[g].colbits);
+		edac_dbg(0, "Channel %d: %lld MByte DIMM\n", i, capacity >> (20 - 3));
+		dimm->nr_pages = MiB_TO_PAGES(capacity >> (20 - 3));
+		dimm->grain = 32;
+		dimm->dtype = (d->dwid == 0) ? DEV_X8 : DEV_X16;
+		dimm->mtype = MEM_DDR3;
+		dimm->edac_mode = EDAC_SECDED;
+		snprintf(dimm->label, sizeof(dimm->label), "Slice#%d_Chan#%d", i / 2, i % 2);
+	}
+}
+
+static const int dnv_dtypes[] = {
+	DEV_X8, DEV_X4, DEV_X16, DEV_UNKNOWN
+};
+
+static void dnv_get_dimm_config(struct mem_ctl_info *mci)
+{
+	int	i, j, ranks_of_dimm[DNV_MAX_DIMMS], banks, rowbits, colbits, memtype;
+	struct dimm_info *dimm;
+	struct d_cr_drp *d;
+	u64	capacity;
+
+	if (dsch.ddr4en) {
+		memtype = MEM_DDR4;
+		banks = 16;
+		colbits = 10;
+	} else {
+		memtype = MEM_DDR3;
+		banks = 8;
+	}
+
+	for (i = 0; i < DNV_NUM_CHANNELS; i++) {
+		if (dmap4[i].row14 == 31)
+			rowbits = 14;
+		else if (dmap4[i].row15 == 31)
+			rowbits = 15;
+		else if (dmap4[i].row16 == 31)
+			rowbits = 16;
+		else if (dmap4[i].row17 == 31)
+			rowbits = 17;
+		else
+			rowbits = 18;
+
+		if (memtype == MEM_DDR3) {
+			if (dmap1[i].ca11 != 0x3f)
+				colbits = 12;
+			else
+				colbits = 10;
+		}
+
+		d = &drp[i];
+		/* DIMM0 is present if rank0 and/or rank1 is enabled */
+		ranks_of_dimm[0] = d->rken0 + d->rken1;
+		/* DIMM1 is present if rank2 and/or rank3 is enabled */
+		ranks_of_dimm[1] = d->rken2 + d->rken3;
+
+		for (j = 0; j < DNV_MAX_DIMMS; j++) {
+			if (!ranks_of_dimm[j])
+				continue;
+
+			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, i, j, 0);
+			if (!dimm) {
+				edac_dbg(0, "No allocated DIMM for channel %d DIMM %d\n", i, j);
+				continue;
+			}
+
+			capacity = ranks_of_dimm[j] * banks * (1ul << rowbits) * (1ul << colbits);
+			edac_dbg(0, "Channel %d DIMM %d: %lld MByte DIMM\n", i, j, capacity >> (20 - 3));
+			dimm->nr_pages = MiB_TO_PAGES(capacity >> (20 - 3));
+			dimm->grain = 32;
+			dimm->dtype = dnv_dtypes[j ? d->dimmdwid0 : d->dimmdwid1];
+			dimm->mtype = memtype;
+			dimm->edac_mode = EDAC_SECDED;
+			snprintf(dimm->label, sizeof(dimm->label), "Chan#%d_DIMM#%d", i, j);
+		}
+	}
+}
+
+static int pnd2_register_mci(struct mem_ctl_info **ppmci)
+{
+	struct edac_mc_layer layers[2];
+	struct mem_ctl_info *mci;
+	struct pnd2_pvt *pvt;
+	int rc;
+
+	rc = ops->check_ecc();
+	if (rc < 0)
+		return rc;
+
+	/* Allocate a new MC control structure */
+	layers[0].type = EDAC_MC_LAYER_CHANNEL;
+	layers[0].size = ops->channels;
+	layers[0].is_virt_csrow = false;
+	layers[1].type = EDAC_MC_LAYER_SLOT;
+	layers[1].size = ops->dimms_per_channel;
+	layers[1].is_virt_csrow = true;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+	if (!mci)
+		return -ENOMEM;
+
+	pvt = mci->pvt_info;
+	memset(pvt, 0, sizeof(*pvt));
+
+	mci->mod_name = "pnd2_edac.c";
+	mci->dev_name = ops->name;
+	mci->ctl_name = "Pondicherry2";
+
+	/* Get dimm basic config and the memory layout */
+	ops->get_dimm_config(mci);
+
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
+		edac_mc_free(mci);
+		return -EINVAL;
+	}
+
+	*ppmci = mci;
+
+	return 0;
+}
+
+static void pnd2_unregister_mci(struct mem_ctl_info *mci)
+{
+	if (unlikely(!mci || !mci->pvt_info)) {
+		pnd2_printk(KERN_ERR, "Couldn't find mci handler\n");
+		return;
+	}
+
+	/* Remove MC sysfs nodes */
+	edac_mc_del_mc(NULL);
+	edac_dbg(1, "%s: free mci struct\n", mci->ctl_name);
+	edac_mc_free(mci);
+}
+
+/*
+ * Callback function registered with core kernel mce code.
+ * Called once for each logged error.
+ */
+static int pnd2_mce_check_error(struct notifier_block *nb, unsigned long val, void *data)
+{
+	struct mce *mce = (struct mce *)data;
+	struct mem_ctl_info *mci;
+	struct dram_addr daddr;
+	char *type;
+
+	if (get_edac_report_status() == EDAC_REPORTING_DISABLED)
+		return NOTIFY_DONE;
+
+	mci = pnd2_mci;
+	if (!mci)
+		return NOTIFY_DONE;
+
+	/*
+	 * Just let mcelog handle it if the error is
+	 * outside the memory controller. A memory error
+	 * is indicated by bit 7 = 1 and bits = 8-11,13-15 = 0.
+	 * bit 12 has an special meaning.
+	 */
+	if ((mce->status & 0xefff) >> 7 != 1)
+		return NOTIFY_DONE;
+
+	if (mce->mcgstatus & MCG_STATUS_MCIP)
+		type = "Exception";
+	else
+		type = "Event";
+
+	pnd2_mc_printk(mci, KERN_INFO, "HANDLING MCE MEMORY ERROR\n");
+	pnd2_mc_printk(mci, KERN_INFO, "CPU %u: Machine Check %s: %llx Bank %u: %llx\n",
+				   mce->extcpu, type, mce->mcgstatus, mce->bank, mce->status);
+	pnd2_mc_printk(mci, KERN_INFO, "TSC %llx ", mce->tsc);
+	pnd2_mc_printk(mci, KERN_INFO, "ADDR %llx ", mce->addr);
+	pnd2_mc_printk(mci, KERN_INFO, "MISC %llx ", mce->misc);
+	pnd2_mc_printk(mci, KERN_INFO, "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
+				   mce->cpuvendor, mce->cpuid, mce->time, mce->socketid, mce->apicid);
+
+	pnd2_mce_output_error(mci, mce, &daddr);
+
+	/* Advice mcelog that the error were handled */
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block pnd2_mce_dec = {
+	.notifier_call	= pnd2_mce_check_error,
+};
+
+#ifdef CONFIG_EDAC_DEBUG
+/*
+ * Write an address to this file to exercise the address decode
+ * logic in this driver.
+ */
+static u64 pnd2_fake_addr;
+#define PND2_BLOB_SIZE 1024
+static char pnd2_result[PND2_BLOB_SIZE];
+static struct dentry *pnd2_test;
+static struct debugfs_blob_wrapper pnd2_blob = {
+	.data = pnd2_result,
+	.size = 0
+};
+
+static int debugfs_u64_set(void *data, u64 val)
+{
+	struct dram_addr daddr;
+	struct mce m;
+
+	*(u64 *)data = val;
+	m.mcgstatus = 0;
+	/* ADDRV + MemRd + Unknown channel */
+	m.status = MCI_STATUS_ADDRV + 0x9f;
+	m.addr = val;
+	pnd2_mce_output_error(pnd2_mci, &m, &daddr);
+	snprintf(pnd2_blob.data, PND2_BLOB_SIZE,
+			 "SysAddr=%llx Channel=%d DIMM=%d Rank=%d Bank=%d Row=%d Column=%d\n",
+			 m.addr, daddr.chan, daddr.dimm, daddr.rank, daddr.bank, daddr.row, daddr.col);
+	pnd2_blob.size = strlen(pnd2_blob.data);
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
+
+static void setup_pnd2_debug(void)
+{
+	pnd2_test = edac_debugfs_create_dir("pnd2_test");
+	edac_debugfs_create_file("pnd2_debug_addr", 0200, pnd2_test,
+							 &pnd2_fake_addr, &fops_u64_wo);
+	debugfs_create_blob("pnd2_debug_results", 0400, pnd2_test, &pnd2_blob);
+}
+
+static void teardown_pnd2_debug(void)
+{
+	debugfs_remove_recursive(pnd2_test);
+}
+#else
+static void setup_pnd2_debug(void)	{}
+static void teardown_pnd2_debug(void)	{}
+#endif /* CONFIG_EDAC_DEBUG */
+
+
+static int pnd2_probe(void)
+{
+	int rc;
+
+	edac_dbg(2, "\n");
+	rc = get_registers();
+	if (rc)
+		return rc;
+
+	return pnd2_register_mci(&pnd2_mci);
+}
+
+static void pnd2_remove(void)
+{
+	edac_dbg(0, "\n");
+	pnd2_unregister_mci(pnd2_mci);
+}
+
+static struct dunit_ops apl_ops = {
+		.name			= "pnd2/apl",
+		.type			= APL,
+		.pmiaddr_shift		= LOG2_PMI_ADDR_GRANULARITY,
+		.pmiidx_shift		= 0,
+		.channels		= APL_NUM_CHANNELS,
+		.dimms_per_channel	= 1,
+		.rd_reg			= apl_rd_reg,
+		.get_registers		= apl_get_registers,
+		.check_ecc		= apl_check_ecc_active,
+		.mk_region		= apl_mk_region,
+		.get_dimm_config	= apl_get_dimm_config,
+		.pmi2mem		= apl_pmi2mem,
+};
+
+static struct dunit_ops dnv_ops = {
+		.name			= "pnd2/dnv",
+		.type			= DNV,
+		.pmiaddr_shift		= 0,
+		.pmiidx_shift		= 1,
+		.channels		= DNV_NUM_CHANNELS,
+		.dimms_per_channel	= 2,
+		.rd_reg			= dnv_rd_reg,
+		.get_registers		= dnv_get_registers,
+		.check_ecc		= dnv_check_ecc_active,
+		.mk_region		= dnv_mk_region,
+		.get_dimm_config	= dnv_get_dimm_config,
+		.pmi2mem		= dnv_pmi2mem,
+};
+
+static const struct x86_cpu_id pnd2_cpuids[] = {
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_GOLDMONT, 0, (kernel_ulong_t)&apl_ops },
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_DENVERTON, 0, (kernel_ulong_t)&dnv_ops },
+	{ }
+};
+MODULE_DEVICE_TABLE(x86cpu, pnd2_cpuids);
+
+static int __init pnd2_init(void)
+{
+	const struct x86_cpu_id *id;
+	int rc;
+
+	edac_dbg(2, "\n");
+
+	id = x86_match_cpu(pnd2_cpuids);
+	if (!id)
+		return -ENODEV;
+
+	ops = (struct dunit_ops *)id->driver_data;
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	rc = pnd2_probe();
+	if (rc < 0) {
+		pnd2_printk(KERN_ERR, "Failed to register device with error %d.\n", rc);
+		return rc;
+	}
+
+	if (!pnd2_mci)
+		return -ENODEV;
+
+	mce_register_decode_chain(&pnd2_mce_dec);
+	setup_pnd2_debug();
+
+	return 0;
+}
+
+static void __exit pnd2_exit(void)
+{
+	edac_dbg(2, "\n");
+	teardown_pnd2_debug();
+	mce_unregister_decode_chain(&pnd2_mce_dec);
+	pnd2_remove();
+}
+
+module_init(pnd2_init);
+module_exit(pnd2_exit);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Tony Luck");
+MODULE_DESCRIPTION("MC Driver for Intel SoC using Pondicherry memory controller");

drivers/edac/pnd2_edac.h

@@ -0,0 +1,301 @@
+/*
+ * Register bitfield descriptions for Pondicherry2 memory controller.
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _PND2_REGS_H
+#define _PND2_REGS_H
+
+struct b_cr_touud_lo_pci {
+	u32	lock : 1;
+	u32	reserved_1 : 19;
+	u32	touud : 12;
+};
+
+#define b_cr_touud_lo_pci_port 0x4c
+#define b_cr_touud_lo_pci_offset 0xa8
+#define b_cr_touud_lo_pci_r_opcode 0x04
+
+struct b_cr_touud_hi_pci {
+	u32	touud : 7;
+	u32	reserved_0 : 25;
+};
+
+#define b_cr_touud_hi_pci_port 0x4c
+#define b_cr_touud_hi_pci_offset 0xac
+#define b_cr_touud_hi_pci_r_opcode 0x04
+
+struct b_cr_tolud_pci {
+	u32	lock : 1;
+	u32	reserved_0 : 19;
+	u32	tolud : 12;
+};
+
+#define b_cr_tolud_pci_port 0x4c
+#define b_cr_tolud_pci_offset 0xbc
+#define b_cr_tolud_pci_r_opcode 0x04
+
+struct b_cr_mchbar_lo_pci {
+	u32 enable : 1;
+	u32 pad_3_1 : 3;
+	u32 pad_14_4: 11;
+	u32 base: 17;
+};
+
+struct b_cr_mchbar_hi_pci {
+	u32 base : 7;
+	u32 pad_31_7 : 25;
+};
+
+/* Symmetric region */
+struct b_cr_slice_channel_hash {
+	u64	slice_1_disabled : 1;
+	u64	hvm_mode : 1;
+	u64	interleave_mode : 2;
+	u64	slice_0_mem_disabled : 1;
+	u64	reserved_0 : 1;
+	u64	slice_hash_mask : 14;
+	u64	reserved_1 : 11;
+	u64	enable_pmi_dual_data_mode : 1;
+	u64	ch_1_disabled : 1;
+	u64	reserved_2 : 1;
+	u64	sym_slice0_channel_enabled : 2;
+	u64	sym_slice1_channel_enabled : 2;
+	u64	ch_hash_mask : 14;
+	u64	reserved_3 : 11;
+	u64	lock : 1;
+};
+
+#define b_cr_slice_channel_hash_port 0x4c
+#define b_cr_slice_channel_hash_offset 0x4c58
+#define b_cr_slice_channel_hash_r_opcode 0x06
+
+struct b_cr_mot_out_base_mchbar {
+	u32	reserved_0 : 14;
+	u32	mot_out_base : 15;
+	u32	reserved_1 : 1;
+	u32	tr_en : 1;
+	u32	imr_en : 1;
+};
+
+#define b_cr_mot_out_base_mchbar_port 0x4c
+#define b_cr_mot_out_base_mchbar_offset 0x6af0
+#define b_cr_mot_out_base_mchbar_r_opcode 0x00
+
+struct b_cr_mot_out_mask_mchbar {
+	u32	reserved_0 : 14;
+	u32	mot_out_mask : 15;
+	u32	reserved_1 : 1;
+	u32	ia_iwb_en : 1;
+	u32	gt_iwb_en : 1;
+};
+
+#define b_cr_mot_out_mask_mchbar_port 0x4c
+#define b_cr_mot_out_mask_mchbar_offset 0x6af4
+#define b_cr_mot_out_mask_mchbar_r_opcode 0x00
+
+struct b_cr_asym_mem_region0_mchbar {
+	u32	pad : 4;
+	u32	slice0_asym_base : 11;
+	u32	pad_18_15 : 4;
+	u32	slice0_asym_limit : 11;
+	u32	slice0_asym_channel_select : 1;
+	u32	slice0_asym_enable : 1;
+};
+
+#define b_cr_asym_mem_region0_mchbar_port 0x4c
+#define b_cr_asym_mem_region0_mchbar_offset 0x6e40
+#define b_cr_asym_mem_region0_mchbar_r_opcode 0x00
+
+struct b_cr_asym_mem_region1_mchbar {
+	u32	pad : 4;
+	u32	slice1_asym_base : 11;
+	u32	pad_18_15 : 4;
+	u32	slice1_asym_limit : 11;
+	u32	slice1_asym_channel_select : 1;
+	u32	slice1_asym_enable : 1;
+};
+
+#define b_cr_asym_mem_region1_mchbar_port 0x4c
+#define b_cr_asym_mem_region1_mchbar_offset 0x6e44
+#define b_cr_asym_mem_region1_mchbar_r_opcode 0x00
+
+/* Some bit fields moved in above two structs on Denverton */
+struct b_cr_asym_mem_region_denverton {
+	u32	pad : 4;
+	u32	slice_asym_base : 8;
+	u32	pad_19_12 : 8;
+	u32	slice_asym_limit : 8;
+	u32	pad_28_30 : 3;
+	u32	slice_asym_enable : 1;
+};
+
+struct b_cr_asym_2way_mem_region_mchbar {
+	u32	pad : 2;
+	u32	asym_2way_intlv_mode : 2;
+	u32	asym_2way_base : 11;
+	u32	pad_16_15 : 2;
+	u32	asym_2way_limit : 11;
+	u32	pad_30_28 : 3;
+	u32	asym_2way_interleave_enable : 1;
+};
+
+#define b_cr_asym_2way_mem_region_mchbar_port 0x4c
+#define b_cr_asym_2way_mem_region_mchbar_offset 0x6e50
+#define b_cr_asym_2way_mem_region_mchbar_r_opcode 0x00
+
+/* Apollo Lake d-unit */
+
+struct d_cr_drp0 {
+	u32	rken0 : 1;
+	u32	rken1 : 1;
+	u32	ddmen : 1;
+	u32	rsvd3 : 1;
+	u32	dwid : 2;
+	u32	dden : 3;
+	u32	rsvd13_9 : 5;
+	u32	rsien : 1;
+	u32	bahen : 1;
+	u32	rsvd18_16 : 3;
+	u32	caswizzle : 2;
+	u32	eccen : 1;
+	u32	dramtype : 3;
+	u32	blmode : 3;
+	u32	addrdec : 2;
+	u32	dramdevice_pr : 2;
+};
+
+#define d_cr_drp0_offset 0x1400
+#define d_cr_drp0_r_opcode 0x00
+
+/* Denverton d-unit */
+
+struct d_cr_dsch {
+	u32	ch0en : 1;
+	u32	ch1en : 1;
+	u32	ddr4en : 1;
+	u32	coldwake : 1;
+	u32	newbypdis : 1;
+	u32	chan_width : 1;
+	u32	rsvd6_6 : 1;
+	u32	ooodis : 1;
+	u32	rsvd18_8 : 11;
+	u32	ic : 1;
+	u32	rsvd31_20 : 12;
+};
+
+#define d_cr_dsch_port 0x16
+#define d_cr_dsch_offset 0x0
+#define d_cr_dsch_r_opcode 0x0
+
+struct d_cr_ecc_ctrl {
+	u32	eccen : 1;
+	u32	rsvd31_1 : 31;
+};
+
+#define d_cr_ecc_ctrl_offset 0x180
+#define d_cr_ecc_ctrl_r_opcode 0x0
+
+struct d_cr_drp {
+	u32	rken0 : 1;
+	u32	rken1 : 1;
+	u32	rken2 : 1;
+	u32	rken3 : 1;
+	u32	dimmdwid0 : 2;
+	u32	dimmdden0 : 2;
+	u32	dimmdwid1 : 2;
+	u32	dimmdden1 : 2;
+	u32	rsvd15_12 : 4;
+	u32	dimmflip : 1;
+	u32	rsvd31_17 : 15;
+};
+
+#define d_cr_drp_offset 0x158
+#define d_cr_drp_r_opcode 0x0
+
+struct d_cr_dmap {
+	u32	ba0 : 5;
+	u32	ba1 : 5;
+	u32	bg0 : 5; /* if ddr3, ba2 = bg0 */
+	u32	bg1 : 5; /* if ddr3, ba3 = bg1 */
+	u32	rs0 : 5;
+	u32	rs1 : 5;
+	u32	rsvd : 2;
+};
+
+#define d_cr_dmap_offset 0x174
+#define d_cr_dmap_r_opcode 0x0
+
+struct d_cr_dmap1 {
+	u32	ca11 : 6;
+	u32	bxor : 1;
+	u32	rsvd : 25;
+};
+
+#define d_cr_dmap1_offset 0xb4
+#define d_cr_dmap1_r_opcode 0x0
+
+struct d_cr_dmap2 {
+	u32	row0 : 5;
+	u32	row1 : 5;
+	u32	row2 : 5;
+	u32	row3 : 5;
+	u32	row4 : 5;
+	u32	row5 : 5;
+	u32	rsvd : 2;
+};
+
+#define d_cr_dmap2_offset 0x148
+#define d_cr_dmap2_r_opcode 0x0
+
+struct d_cr_dmap3 {
+	u32	row6 : 5;
+	u32	row7 : 5;
+	u32	row8 : 5;
+	u32	row9 : 5;
+	u32	row10 : 5;
+	u32	row11 : 5;
+	u32	rsvd : 2;
+};
+
+#define d_cr_dmap3_offset 0x14c
+#define d_cr_dmap3_r_opcode 0x0
+
+struct d_cr_dmap4 {
+	u32	row12 : 5;
+	u32	row13 : 5;
+	u32	row14 : 5;
+	u32	row15 : 5;
+	u32	row16 : 5;
+	u32	row17 : 5;
+	u32	rsvd : 2;
+};
+
+#define d_cr_dmap4_offset 0x150
+#define d_cr_dmap4_r_opcode 0x0
+
+struct d_cr_dmap5 {
+	u32	ca3 : 4;
+	u32	ca4 : 4;
+	u32	ca5 : 4;
+	u32	ca6 : 4;
+	u32	ca7 : 4;
+	u32	ca8 : 4;
+	u32	ca9 : 4;
+	u32	rsvd : 4;
+};
+
+#define d_cr_dmap5_offset 0x154
+#define d_cr_dmap5_r_opcode 0x0
+
+#endif /* _PND2_REGS_H */

drivers/edac/xgene_edac.c

@@ -1596,7 +1596,7 @@ static void xgene_edac_pa_report(struct edac_device_ctl_info *edac_dev)
 	reg = readl(ctx->dev_csr + IOBPATRANSERRINTSTS);
 	if (!reg)
 		goto chk_iob_axi0;
-	dev_err(edac_dev->dev, "IOB procesing agent (PA) transaction error\n");
+	dev_err(edac_dev->dev, "IOB processing agent (PA) transaction error\n");
 	if (reg & IOBPA_RDATA_CORRUPT_MASK)
 		dev_err(edac_dev->dev, "IOB PA read data RAM error\n");
 	if (reg & IOBPA_M_RDATA_CORRUPT_MASK)

drivers/firmware/efi/efi.c

@@ -389,7 +389,6 @@ int __init efi_mem_desc_lookup(u64 phys_addr, efi_memory_desc_t *out_md)
 			return 0;
 		}
 	}
-	pr_err_once("requested map not found.\n");
 	return -ENOENT;
 }
 

drivers/firmware/efi/esrt.c

@@ -254,7 +254,7 @@ void __init efi_esrt_init(void)
 
 	rc = efi_mem_desc_lookup(efi.esrt, &md);
 	if (rc < 0) {
-		pr_err("ESRT header is not in the memory map.\n");
+		pr_warn("ESRT header is not in the memory map.\n");
 		return;
 	}
 

drivers/gpu/drm/etnaviv/etnaviv_gpu.c

@@ -1311,6 +1311,8 @@ int etnaviv_gpu_submit(struct etnaviv_gpu *gpu,
 		goto out_pm_put;
 	}
 
+	mutex_lock(&gpu->lock);
+
 	fence = etnaviv_gpu_fence_alloc(gpu);
 	if (!fence) {
 		event_free(gpu, event);
@@ -1318,8 +1320,6 @@ int etnaviv_gpu_submit(struct etnaviv_gpu *gpu,
 		goto out_pm_put;
 	}
 
-	mutex_lock(&gpu->lock);
-
 	gpu->event[event].fence = fence;
 	submit->fence = fence->seqno;
 	gpu->active_fence = submit->fence;

drivers/gpu/drm/i915/gvt/edid.c

@@ -495,7 +495,8 @@ void intel_gvt_i2c_handle_aux_ch_write(struct intel_vgpu *vgpu,
 			unsigned char val = edid_get_byte(vgpu);
 
 			aux_data_for_write = (val << 16);
-		}
+		} else
+			aux_data_for_write = (0xff << 16);
 	}
 	/* write the return value in AUX_CH_DATA reg which includes:
 	 * ACK of I2C_WRITE

drivers/gpu/drm/i915/gvt/gtt.c

@@ -1837,11 +1837,15 @@ static int emulate_gtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off,
 		ret = gtt_entry_p2m(vgpu, &e, &m);
 		if (ret) {
 			gvt_vgpu_err("fail to translate guest gtt entry\n");
-			return ret;
+			/* guest driver may read/write the entry when partial
+			 * update the entry in this situation p2m will fail
+			 * settting the shadow entry to point to a scratch page
+			 */
+			ops->set_pfn(&m, gvt->gtt.scratch_ggtt_mfn);
 		}
 	} else {
 		m = e;
-		m.val64 = 0;
+		ops->set_pfn(&m, gvt->gtt.scratch_ggtt_mfn);
 	}
 
 	ggtt_set_shadow_entry(ggtt_mm, &m, g_gtt_index);

drivers/gpu/drm/i915/gvt/handlers.c

@@ -970,6 +970,14 @@ static int dp_aux_ch_ctl_mmio_write(struct intel_vgpu *vgpu,
 	return 0;
 }
 
+static int mbctl_write(struct intel_vgpu *vgpu, unsigned int offset,
+		void *p_data, unsigned int bytes)
+{
+	*(u32 *)p_data &= (~GEN6_MBCTL_ENABLE_BOOT_FETCH);
+	write_vreg(vgpu, offset, p_data, bytes);
+	return 0;
+}
+
 static int vga_control_mmio_write(struct intel_vgpu *vgpu, unsigned int offset,
 		void *p_data, unsigned int bytes)
 {
@@ -2238,7 +2246,7 @@ static int init_generic_mmio_info(struct intel_gvt *gvt)
 	MMIO_D(0x7180, D_ALL);
 	MMIO_D(0x7408, D_ALL);
 	MMIO_D(0x7c00, D_ALL);
-	MMIO_D(GEN6_MBCTL, D_ALL);
+	MMIO_DH(GEN6_MBCTL, D_ALL, NULL, mbctl_write);
 	MMIO_D(0x911c, D_ALL);
 	MMIO_D(0x9120, D_ALL);
 	MMIO_DFH(GEN7_UCGCTL4, D_ALL, F_CMD_ACCESS, NULL, NULL);

drivers/gpu/drm/i915/gvt/kvmgt.c

@@ -1326,6 +1326,7 @@ static int kvmgt_guest_init(struct mdev_device *mdev)
 	vgpu->handle = (unsigned long)info;
 	info->vgpu = vgpu;
 	info->kvm = kvm;
+	kvm_get_kvm(info->kvm);
 
 	kvmgt_protect_table_init(info);
 	gvt_cache_init(vgpu);
@@ -1347,6 +1348,7 @@ static bool kvmgt_guest_exit(struct kvmgt_guest_info *info)
 	}
 
 	kvm_page_track_unregister_notifier(info->kvm, &info->track_node);
+	kvm_put_kvm(info->kvm);
 	kvmgt_protect_table_destroy(info);
 	gvt_cache_destroy(info->vgpu);
 	vfree(info);

drivers/gpu/drm/i915/gvt/render.c

@@ -207,7 +207,7 @@ static void load_mocs(struct intel_vgpu *vgpu, int ring_id)
 		l3_offset.reg = 0xb020;
 		for (i = 0; i < 32; i++) {
 			gen9_render_mocs_L3[i] = I915_READ(l3_offset);
-			I915_WRITE(l3_offset, vgpu_vreg(vgpu, offset));
+			I915_WRITE(l3_offset, vgpu_vreg(vgpu, l3_offset));
 			POSTING_READ(l3_offset);
 			l3_offset.reg += 4;
 		}