Merge tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform updates from Olof Johansson:
 "More multiplatform enablement for ARM platforms.  The ones converted
  in this branch are:

   - bcm2835
   - cns3xxx
   - sirf
   - nomadik
   - msx
   - spear
   - tegra
   - ux500

  We're getting close to having most of them converted!

  One of the larger platforms remaining is Samsung Exynos, and there are
  a bunch of supporting patches in this merge window for it.  There was
  a patch in this branch to a early version of multiplatform conversion,
  but it ended up being reverted due to need of more bake time.  The
  revert commit is part of the branch since it would have required
  rebasing multiple dependent branches and they were stable by then"

* tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
  mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms
  clocksource: nomadik-mtu: fix up clocksource/timer
  Revert "ARM: exynos: enable multiplatform support"
  ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"
  ARM: exynos: enable multiplatform support
  rtc: s3c: make header file local
  mtd: onenand/samsung: make regs-onenand.h file local
  thermal/exynos: remove unnecessary header inclusions
  mmc: sdhci-s3c: remove platform dependencies
  ARM: samsung: move mfc device definition to s5p-dev-mfc.c
  ARM: exynos: move debug-macro.S to include/debug/
  ARM: exynos: prepare for sparse IRQ
  ARM: exynos: introduce EXYNOS_ATAGS symbol
  ARM: tegra: build assembly files with -march=armv7-a
  ARM: Push selects for TWD/SCU into machine entries
  ARM: ux500: build hotplug.o for ARMv7-a
  ARM: ux500: move to multiplatform
  ARM: ux500: make remaining headers local
  ARM: ux500: make irqs.h local to platform
  ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>
  ...

arch/arm/Kconfig

@@ -362,37 +362,6 @@ config ARCH_AT91
 	  This enables support for systems based on Atmel
 	  AT91RM9200 and AT91SAM9* processors.
 
-config ARCH_BCM2835
-	bool "Broadcom BCM2835 family"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select ARM_ERRATA_411920
-	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
-	select CLKSRC_OF
-	select COMMON_CLK
-	select CPU_V6
-	select GENERIC_CLOCKEVENTS
-	select MULTI_IRQ_HANDLER
-	select PINCTRL
-	select PINCTRL_BCM2835
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  This enables support for the Broadcom BCM2835 SoC. This SoC is
-	  use in the Raspberry Pi, and Roku 2 devices.
-
-config ARCH_CNS3XXX
-	bool "Cavium Networks CNS3XXX family"
-	select ARM_GIC
-	select CPU_V6K
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_CACHE_L2X0
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
-	help
-	  Support for Cavium Networks CNS3XXX platform.
-
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
@@ -416,21 +385,6 @@ config ARCH_GEMINI
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
-config ARCH_SIRF
-	bool "CSR SiRF"
-	select ARCH_REQUIRE_GPIOLIB
-	select AUTO_ZRELADDR
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select MIGHT_HAVE_CACHE_L2X0
-	select NO_IOPORT
-	select PINCTRL
-	select PINCTRL_SIRF
-	select USE_OF
-	help
-	  Support for CSR SiRFprimaII/Marco/Polo platforms
-
 config ARCH_EBSA110
 	bool "EBSA-110"
 	select ARCH_USES_GETTIMEOFFSET
@@ -470,23 +424,6 @@ config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
-config ARCH_MXS
-	bool "Freescale MXS-based"
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CLKSRC_OF
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK_PREPARE
-	select MULTI_IRQ_HANDLER
-	select PINCTRL
-	select SPARSE_IRQ
-	select STMP_DEVICE
-	select USE_OF
-	help
-	  Support for Freescale MXS-based family of processors
-
 config ARCH_NETX
 	bool "Hilscher NetX based"
 	select ARM_VIC
@@ -659,25 +596,6 @@ config ARCH_LPC32XX
 	help
 	  Support for the NXP LPC32XX family of processors
 
-config ARCH_TEGRA
-	bool "NVIDIA Tegra"
-	select ARCH_HAS_CPUFREQ
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CLKSRC_OF
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select SOC_BUS
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  This enables support for NVIDIA Tegra based systems (Tegra APX,
-	  Tegra 6xx and Tegra 2 series).
-
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
@@ -715,6 +633,8 @@ config ARCH_SHMOBILE
 	bool "Renesas SH-Mobile / R-Mobile"
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_CLK
 	select HAVE_MACH_CLKDEV
 	select HAVE_SMP
@@ -900,51 +820,6 @@ config ARCH_U300
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
-config ARCH_U8500
-	bool "ST-Ericsson U8500 Series"
-	depends on MMU
-	select ARCH_HAS_CPUFREQ
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select SPARSE_IRQ
-	help
-	  Support for ST-Ericsson's Ux500 architecture
-
-config ARCH_NOMADIK
-	bool "STMicroelectronics Nomadik"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select ARM_VIC
-	select CLKSRC_NOMADIK_MTU
-	select COMMON_CLK
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_CACHE_L2X0
-	select USE_OF
-	select PINCTRL
-	select PINCTRL_STN8815
-	select SPARSE_IRQ
-	help
-	  Support for the Nomadik platform by ST-Ericsson
-
-config PLAT_SPEAR
-	bool "ST SPEAr"
-	select ARCH_HAS_CPUFREQ
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	help
-	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
@@ -1036,6 +911,8 @@ source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-bcm/Kconfig"
 
+source "arch/arm/mach-bcm2835/Kconfig"
+
 source "arch/arm/mach-clps711x/Kconfig"
 
 source "arch/arm/mach-cns3xxx/Kconfig"
@@ -1101,7 +978,7 @@ source "arch/arm/plat-samsung/Kconfig"
 
 source "arch/arm/mach-socfpga/Kconfig"
 
-source "arch/arm/plat-spear/Kconfig"
+source "arch/arm/mach-spear/Kconfig"
 
 source "arch/arm/mach-s3c24xx/Kconfig"
 
@@ -1528,7 +1405,6 @@ config SMP
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAVE_SMP
 	depends on MMU
-	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
 	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
@@ -1653,7 +1529,6 @@ config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP
 	default y
-	select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system

arch/arm/Kconfig.debug

@@ -89,6 +89,10 @@ choice
 		bool "Kernel low-level debugging on 9263 and 9g45"
 		depends on HAVE_AT91_DBGU1
 
+	config DEBUG_BCM2835
+		bool "Kernel low-level debugging on BCM2835 PL011 UART"
+		depends on ARCH_BCM2835
+
 	config DEBUG_CLPS711X_UART1
 		bool "Kernel low-level debugging messages via UART1"
 		depends on ARCH_CLPS711X
@@ -103,6 +107,13 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
+	config DEBUG_CNS3XXX
+		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
+		depends on ARCH_CNS3XXX
+		help
+		  Say Y here if you want the debug print routines to direct
+                  their output to the CNS3xxx UART0.
+
 	config DEBUG_DAVINCI_DA8XX_UART1
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 		depends on ARCH_DAVINCI_DA8XX
@@ -298,6 +309,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on MVEBU based platforms.
 
+	config DEBUG_NOMADIK_UART
+		bool "Kernel low-level debugging messages via NOMADIK UART"
+		depends on ARCH_NOMADIK
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on NOMADIK based platforms.
+
 	config DEBUG_OMAP2PLUS_UART
 		bool "Kernel low-level debugging messages via OMAP2PLUS UART"
 		depends on ARCH_OMAP2PLUS
@@ -330,6 +348,7 @@ choice
 
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG
+		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		bool "Use S3C UART 0 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -341,6 +360,7 @@ choice
 
 	config DEBUG_S3C_UART1
 		depends on PLAT_SAMSUNG
+		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		bool "Use S3C UART 1 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -352,6 +372,7 @@ choice
 
 	config DEBUG_S3C_UART2
 		depends on PLAT_SAMSUNG
+		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		bool "Use S3C UART 2 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -363,6 +384,7 @@ choice
 
 	config DEBUG_S3C_UART3
 		depends on PLAT_SAMSUNG && ARCH_EXYNOS
+		select DEBUG_EXYNOS_UART
 		bool "Use S3C UART 3 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -414,6 +436,13 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the uart1 port on SiRFmarco devices.
 
+	config DEBUG_UX500_UART
+		depends on ARCH_U8500
+		bool "Use Ux500 UART for low-level debug"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Ux500 based platforms.
+
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
 		depends on ARCH_VEXPRESS && CPU_CP15_MMU
@@ -485,6 +514,9 @@ choice
 
 endchoice
 
+config DEBUG_EXYNOS_UART
+	bool
+
 config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
 						DEBUG_IMX25_UART || \
@@ -580,6 +612,9 @@ endchoice
 
 config DEBUG_LL_INCLUDE
 	string
+	default "debug/bcm2835.S" if DEBUG_BCM2835
+	default "debug/cns3xxx.S" if DEBUG_CNS3XXX
+	default "debug/exynos.S" if DEBUG_EXYNOS_UART
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
@@ -591,14 +626,18 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX6Q_UART
 	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
+	default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART
+	default "debug/nomadik.S" if DEBUG_NOMADIK_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
+	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
 	default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
 		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
+	default "debug/ux500.S" if DEBUG_UX500_UART
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
 	default "mach/debug-macro.S"
 

arch/arm/Makefile

@@ -190,9 +190,7 @@ machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_W90X900)		+= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		+= footbridge
 machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
-machine-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx
-machine-$(CONFIG_ARCH_SPEAR3XX)		+= spear3xx
-machine-$(CONFIG_MACH_SPEAR600)		+= spear6xx
+machine-$(CONFIG_PLAT_SPEAR)		+= spear
 machine-$(CONFIG_ARCH_VIRT)		+= virt
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
@@ -206,7 +204,6 @@ plat-$(CONFIG_PLAT_ORION)	+= orion
 plat-$(CONFIG_PLAT_PXA)		+= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	+= samsung
 plat-$(CONFIG_PLAT_S5P)		+= samsung
-plat-$(CONFIG_PLAT_SPEAR)	+= spear
 plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/configs/bcm2835_defconfig

@@ -29,6 +29,8 @@ CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_JUMP_LABEL=y
+CONFIG_ARCH_MULTI_V6=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_BCM2835=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y

arch/arm/configs/cns3420vb_defconfig

@@ -19,8 +19,11 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_IOSCHED_CFQ=m
+CONFIG_ARCH_MULTI_V6=y
+#CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_CNS3XXX=y
 CONFIG_MACH_CNS3420VB=y
+CONFIG_DEBUG_CNS3XXX=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0

arch/arm/configs/multi_v7_defconfig

@@ -3,13 +3,19 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
+CONFIG_ARCH_SIRF=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_SOCFPGA=y
 CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_WM8850=y
 # CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
 CONFIG_ARCH_ZYNQ=y
 CONFIG_ARM_ERRATA_754322=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR13XX=y
+CONFIG_MACH_SPEAR1310=y
+CONFIG_MACH_SPEAR1340=y
 CONFIG_SMP=y
 CONFIG_ARM_ARCH_TIMER=y
 CONFIG_AEABI=y
@@ -23,6 +29,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
+CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_CALXEDA_XGMAC=y
 CONFIG_SMSC911X=y
@@ -31,17 +38,26 @@ CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
+CONFIG_KEYBOARD_SPEAR=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_SIRFSOC=y
+CONFIG_SERIAL_SIRFSOC_CONSOLE=y
+CONFIG_SERIAL_VT8500=y
+CONFIG_SERIAL_VT8500_CONSOLE=y
 CONFIG_IPMI_HANDLER=y
 CONFIG_IPMI_SI=y
 CONFIG_I2C=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_SIRF=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
+CONFIG_SPI_SIRF=y
+CONFIG_GPIO_PL061=y
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
+CONFIG_FB_WM8505=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_USB=y
 CONFIG_USB_ISP1760_HCD=y
@@ -50,11 +66,18 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_MMC_WMT=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_HIGHBANK_MC=y
 CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL031=y
+CONFIG_RTC_DRV_VT8500=y
+CONFIG_PWM=y
+CONFIG_PWM_VT8500=y
 CONFIG_DMADEVICES=y
 CONFIG_PL330_DMA=y
+CONFIG_SIRF_DMA=y
+CONFIG_DW_DMAC=y

arch/arm/configs/mxs_defconfig

@@ -22,8 +22,8 @@ CONFIG_MODVERSIONS=y
 CONFIG_BLK_DEV_INTEGRITY=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXS=y
-CONFIG_MACH_MXS_DT=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y

arch/arm/configs/nhk8815_defconfig

@@ -1,11 +1,9 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
@@ -13,6 +11,7 @@ CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_NOMADIK=y
 CONFIG_MACH_NOMADIK_8815NHK=y
 CONFIG_PREEMPT=y
@@ -20,7 +19,6 @@ CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -32,14 +30,10 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
@@ -53,14 +47,16 @@ CONFIG_BT_HCIVHCI=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_TESTS=m
+CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSMC=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -72,47 +68,48 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
+CONFIG_NETCONSOLE=m
 CONFIG_TUN=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-CONFIG_NETCONSOLE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_NOMADIK=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_GPIO=y
+CONFIG_I2C_NOMADIK=y
 CONFIG_DEBUG_GPIO=y
-CONFIG_PINCTRL_NOMADIK=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
+CONFIG_MMC_ARMMMCI=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
 CONFIG_FUSE_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
-CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_NLS_CODEPAGE_437=y
@@ -120,12 +117,11 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_DES=y

arch/arm/configs/spear3xx_defconfig

@@ -6,7 +6,9 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR3XX=y
 CONFIG_MACH_SPEAR300=y
 CONFIG_MACH_SPEAR310=y
 CONFIG_MACH_SPEAR320=y

arch/arm/configs/spear6xx_defconfig

@@ -6,6 +6,7 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR6XX=y
 CONFIG_BINFMT_MISC=y

arch/arm/mach-bcm2835/include/mach/debug-macro.S → arch/arm/include/debug/bcm2835.S

@@ -11,7 +11,8 @@
  *
  */
 
-#include <mach/bcm2835_soc.h>
+#define BCM2835_DEBUG_PHYS 0x20201000
+#define BCM2835_DEBUG_VIRT 0xf0201000
 
 	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =BCM2835_DEBUG_PHYS

arch/arm/mach-exynos/include/mach/debug-macro.S → arch/arm/include/debug/exynos.S

@@ -1,10 +1,7 @@
-/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S
- *
+/*
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -12,7 +9,10 @@
 
 /* pull in the relevant register and map files. */
 
-#include <mach/map.h>
+#define S3C_ADDR_BASE   0xF6000000
+#define S3C_VA_UART	S3C_ADDR_BASE + 0x01000000
+#define EXYNOS4_PA_UART	0x13800000
+#define EXYNOS5_PA_UART	0x12C00000
 
 	/* note, for the boot process to work we have to keep the UART
 	 * virtual address aligned to an 1MiB boundary for the L1
@@ -36,4 +36,4 @@
 #define fifo_full fifo_full_s5pv210
 #define fifo_level fifo_level_s5pv210
 
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>

arch/arm/mach-prima2/include/mach/uart.h → arch/arm/include/debug/sirf.S

@@ -1,15 +1,11 @@
 /*
- * arch/arm/mach-prima2/include/mach/uart.h
+ * arch/arm/mach-prima2/include/mach/debug-macro.S
  *
  * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
  *
  * Licensed under GPLv2 or later.
  */
 
-#ifndef __MACH_PRIMA2_SIRFSOC_UART_H
-#define __MACH_PRIMA2_SIRFSOC_UART_H
-
-/* UART-1: used as serial debug port */
 #if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1)
 #define SIRFSOC_UART1_PA_BASE          0xb0060000
 #elif defined(CONFIG_DEBUG_SIRFMARCO_UART1)
@@ -17,8 +13,8 @@
 #else
 #define SIRFSOC_UART1_PA_BASE          0
 #endif
-#define SIRFSOC_UART1_VA_BASE          SIRFSOC_VA(0x060000)
-#define SIRFSOC_UART1_SIZE		SZ_4K
+
+#define SIRFSOC_UART1_VA_BASE		0xFEC60000
 
 #define SIRFSOC_UART_TXFIFO_STATUS	0x0114
 #define SIRFSOC_UART_TXFIFO_DATA	0x0118
@@ -26,4 +22,21 @@
 #define SIRFSOC_UART1_TXFIFO_FULL                       (1 << 5)
 #define SIRFSOC_UART1_TXFIFO_EMPTY			(1 << 6)
 
-#endif
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =SIRFSOC_UART1_PA_BASE		@ physical
+	ldr	\rv, =SIRFSOC_UART1_VA_BASE		@ virtual
+	.endm
+
+	.macro	senduart,rd,rx
+	str	\rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA]
+	.endm
+
+	.macro	busyuart,rd,rx
+	.endm
+
+	.macro	waituart,rd,rx
+1001:	ldr	\rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS]
+	tst	\rd, #SIRFSOC_UART1_TXFIFO_EMPTY
+	beq	1001b
+	.endm
+

arch/arm/include/debug/ux500.S

@@ -0,0 +1,48 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+
+#if CONFIG_UX500_DEBUG_UART > 2
+#error Invalid Ux500 debug UART
+#endif
+
+/*
+ * DEBUG_LL only works if only one SOC is built in.  We don't use #else below
+ * in order to get "__UX500_UART redefined" warnings if more than one SOC is
+ * built, so that there's some hint during the build that something is wrong.
+ */
+
+#ifdef CONFIG_UX500_SOC_DB8500
+#define U8500_UART0_PHYS_BASE	(0x80120000)
+#define U8500_UART1_PHYS_BASE	(0x80121000)
+#define U8500_UART2_PHYS_BASE	(0x80007000)
+#define U8500_UART0_VIRT_BASE	(0xa8120000)
+#define U8500_UART1_VIRT_BASE	(0xa8121000)
+#define U8500_UART2_VIRT_BASE	(0xa8007000)
+#define __UX500_PHYS_UART(n)	U8500_UART##n##_PHYS_BASE
+#define __UX500_VIRT_UART(n)	U8500_UART##n##_VIRT_BASE
+#endif
+
+#if !defined(__UX500_PHYS_UART) || !defined(__UX500_VIRT_UART)
+#error Unknown SOC
+#endif
+
+#define UX500_PHYS_UART(n)	__UX500_PHYS_UART(n)
+#define UX500_VIRT_UART(n)	__UX500_VIRT_UART(n)
+#define UART_PHYS_BASE	UX500_PHYS_UART(CONFIG_UX500_DEBUG_UART)
+#define UART_VIRT_BASE	UX500_VIRT_UART(CONFIG_UX500_DEBUG_UART)
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =UART_PHYS_BASE		@ no, physical address
+	ldr	\rv, =UART_VIRT_BASE		@ yes, virtual address
+	.endm
+
+#include <asm/hardware/debug-pl01x.S>

arch/arm/mach-bcm2835/Kconfig

@@ -0,0 +1,15 @@
+config ARCH_BCM2835
+	bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select ARM_ERRATA_411920
+	select ARM_TIMER_SP804
+	select CLKDEV_LOOKUP
+	select CLKSRC_OF
+	select CPU_V6
+	select GENERIC_CLOCKEVENTS
+	select PINCTRL
+	select PINCTRL_BCM2835
+	help
+	  This enables support for the Broadcom BCM2835 SoC. This SoC is
+	  use in the Raspberry Pi, and Roku 2 devices.

arch/arm/mach-bcm2835/Makefile.boot

@@ -1 +0,0 @@
-zreladdr-y := 0x00008000

arch/arm/mach-bcm2835/bcm2835.c

@@ -23,8 +23,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/bcm2835_soc.h>
-
 #define PM_RSTC				0x1c
 #define PM_RSTS				0x20
 #define PM_WDOG				0x24
@@ -34,6 +32,10 @@
 #define PM_RSTC_WRCFG_FULL_RESET	0x00000020
 #define PM_RSTS_HADWRH_SET		0x00000040
 
+#define BCM2835_PERIPH_PHYS	0x20000000
+#define BCM2835_PERIPH_VIRT	0xf0000000
+#define BCM2835_PERIPH_SIZE	SZ_16M
+
 static void __iomem *wdt_regs;
 
 /*

arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h

@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2012 Stephen Warren
- *
- * Derived from code:
- * Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_BCM2835_BCM2835_SOC_H__
-#define __MACH_BCM2835_BCM2835_SOC_H__
-
-#include <asm/sizes.h>
-
-#define BCM2835_PERIPH_PHYS	0x20000000
-#define BCM2835_PERIPH_VIRT	0xf0000000
-#define BCM2835_PERIPH_SIZE	SZ_16M
-#define BCM2835_DEBUG_PHYS	0x20201000
-#define BCM2835_DEBUG_VIRT	0xf0201000
-
-#endif

arch/arm/mach-bcm2835/include/mach/gpio.h

@@ -1 +0,0 @@
-/* empty */

arch/arm/mach-bcm2835/include/mach/timex.h

@@ -1,26 +0,0 @@
-/*
- *  BCM2835 system clock frequency
- *
- *  Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		(1000000)
-
-#endif

arch/arm/mach-bcm2835/include/mach/uncompress.h

@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2010 Broadcom
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/io.h>
-#include <linux/amba/serial.h>
-#include <mach/bcm2835_soc.h>
-
-#define UART0_BASE BCM2835_DEBUG_PHYS
-
-#define BCM2835_UART_DR IOMEM(UART0_BASE + UART01x_DR)
-#define BCM2835_UART_FR IOMEM(UART0_BASE + UART01x_FR)
-#define BCM2835_UART_CR IOMEM(UART0_BASE + UART011_CR)
-
-static inline void putc(int c)
-{
-	while (__raw_readl(BCM2835_UART_FR) & UART01x_FR_TXFF)
-		barrier();
-
-	__raw_writel(c, BCM2835_UART_DR);
-}
-
-static inline void flush(void)
-{
-	int fr;
-
-	do {
-		fr = __raw_readl(BCM2835_UART_FR);
-		barrier();
-	} while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE);
-}
-
-#define arch_decomp_setup()

arch/arm/mach-cns3xxx/Kconfig

@@ -1,8 +1,20 @@
+config ARCH_CNS3XXX
+	bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
+	select ARM_GIC
+	select CPU_V6K
+	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
+	select MIGHT_HAVE_PCI
+	select PCI_DOMAINS if PCI
+	help
+	  Support for Cavium Networks CNS3XXX platform.
+
 menu "CNS3XXX platform type"
 	depends on ARCH_CNS3XXX
 
 config MACH_CNS3420VB
 	bool "Support for CNS3420 Validation Board"
+	depends on ATAGS
 	help
 	  Include support for the Cavium Networks CNS3420 MPCore Platform
 	  Baseboard.

arch/arm/mach-cns3xxx/Makefile

@@ -1,3 +1,5 @@
-obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o devices.o
-obj-$(CONFIG_PCI)			+= pcie.o
-obj-$(CONFIG_MACH_CNS3420VB)		+= cns3420vb.o
+obj-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx.o
+cns3xxx-y				+= core.o pm.o
+cns3xxx-$(CONFIG_ATAGS)			+= devices.o
+cns3xxx-$(CONFIG_PCI)			+= pcie.o
+cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o

arch/arm/mach-cns3xxx/cns3420vb.c

@@ -31,9 +31,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/cns3xxx.h>
-#include <mach/irqs.h>
-#include <mach/pm.h>
+#include "cns3xxx.h"
+#include "pm.h"
 #include "core.h"
 #include "devices.h"
 
@@ -247,6 +246,7 @@ static void __init cns3420_map_io(void)
 
 MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_CNS3XXX,
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
 	.init_time	= cns3xxx_timer_init,

arch/arm/mach-cns3xxx/include/mach/cns3xxx.h → arch/arm/mach-cns3xxx/cns3xxx.h

@@ -526,6 +526,8 @@ int cns3xxx_cpu_clock(void);
 /*
  * ARM11 MPCore interrupt sources (primary GIC)
  */
+#define IRQ_TC11MP_GIC_START	32
+
 #define IRQ_CNS3XXX_PMU			(IRQ_TC11MP_GIC_START + 0)
 #define IRQ_CNS3XXX_SDIO		(IRQ_TC11MP_GIC_START + 1)
 #define IRQ_CNS3XXX_L2CC		(IRQ_TC11MP_GIC_START + 2)
@@ -597,9 +599,4 @@ int cns3xxx_cpu_clock(void);
 
 #define NR_IRQS_CNS3XXX			(IRQ_TC11MP_GIC_START + 64)
 
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX)
-#undef NR_IRQS
-#define NR_IRQS				NR_IRQS_CNS3XXX
-#endif
-
 #endif	/* __MACH_BOARD_CNS3XXX_H */

arch/arm/mach-cns3xxx/core.c

@@ -13,12 +13,18 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/irqchip/arm-gic.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <mach/cns3xxx.h>
+#include "cns3xxx.h"
 #include "core.h"
+#include "pm.h"
 
 static struct map_desc cns3xxx_io_desc[] __initdata = {
 	{
@@ -256,3 +262,116 @@ void __init cns3xxx_l2x0_init(void)
 }
 
 #endif /* CONFIG_CACHE_L2X0 */
+
+static int csn3xxx_usb_power_on(struct platform_device *pdev)
+{
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 *
+	 * Set USB AHB INCR length to 16
+	 */
+	if (atomic_inc_return(&usb_pwr_ref) == 1) {
+		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+			MISC_CHIP_CONFIG_REG);
+	}
+
+	return 0;
+}
+
+static void csn3xxx_usb_power_off(struct platform_device *pdev)
+{
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 */
+	if (atomic_dec_return(&usb_pwr_ref) == 0)
+		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+}
+
+static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
+	.power_on	= csn3xxx_usb_power_on,
+	.power_off	= csn3xxx_usb_power_off,
+};
+
+static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
+	.num_ports	= 1,
+	.power_on	= csn3xxx_usb_power_on,
+	.power_off	= csn3xxx_usb_power_off,
+};
+
+static struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
+	{ "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
+	{ "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
+	{ "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },
+	{ "cavium,cns3420-sdhci", CNS3XXX_SDIO_BASE, "ahci", NULL },
+	{},
+};
+
+static void __init cns3xxx_init(void)
+{
+	struct device_node *dn;
+
+	cns3xxx_l2x0_init();
+
+	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-ahci");
+	if (of_device_is_available(dn)) {
+		u32 tmp;
+	
+		tmp = __raw_readl(MISC_SATA_POWER_MODE);
+		tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
+		tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
+		__raw_writel(tmp, MISC_SATA_POWER_MODE);
+	
+		/* Enable SATA PHY */
+		cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
+		cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
+	
+		/* Enable SATA Clock */
+		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
+	
+		/* De-Asscer SATA Reset */
+		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
+	}
+
+	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
+	if (of_device_is_available(dn)) {
+		u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
+		u32 gpioa_pins = __raw_readl(gpioa);
+	
+		/* MMC/SD pins share with GPIOA */
+		gpioa_pins |= 0x1fff0004;
+		__raw_writel(gpioa_pins, gpioa);
+	
+		cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
+		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
+	}
+
+	pm_power_off = cns3xxx_power_off;
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+                        cns3xxx_auxdata, NULL);
+}
+
+static const char *cns3xxx_dt_compat[] __initdata = {
+	"cavium,cns3410",
+	"cavium,cns3420",
+	NULL,
+};
+
+DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx")
+	.dt_compat	= cns3xxx_dt_compat,
+	.nr_irqs	= NR_IRQS_CNS3XXX,
+	.map_io		= cns3xxx_map_io,
+	.init_irq	= cns3xxx_init_irq,
+	.init_time	= cns3xxx_timer_init,
+	.init_machine	= cns3xxx_init,
+	.restart	= cns3xxx_restart,
+MACHINE_END

arch/arm/mach-cns3xxx/devices.c

@@ -16,9 +16,8 @@
 #include <linux/compiler.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-#include <mach/cns3xxx.h>
-#include <mach/irqs.h>
-#include <mach/pm.h>
+#include "cns3xxx.h"
+#include "pm.h"
 #include "core.h"
 #include "devices.h"
 

arch/arm/mach-cns3xxx/include/mach/irqs.h

@@ -1,24 +0,0 @@
-/*
- * Copyright 2000 Deep Blue Solutions Ltd.
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-#define IRQ_LOCALTIMER		29
-#define IRQ_LOCALWDOG		30
-#define IRQ_TC11MP_GIC_START	32
-
-#include <mach/cns3xxx.h>
-
-#ifndef NR_IRQS
-#error "NR_IRQS not defined by the board-specific files"
-#endif
-
-#endif

arch/arm/mach-cns3xxx/include/mach/timex.h

@@ -1,12 +0,0 @@
-/*
- * Cavium Networks architecture timex specifications
- *
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)

arch/arm/mach-cns3xxx/include/mach/uncompress.h

@@ -1,53 +0,0 @@
-/*
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#include <asm/mach-types.h>
-#include <mach/cns3xxx.h>
-
-#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
-
-/*
- * Return the UART base address
- */
-static inline unsigned long get_uart_base(void)
-{
-	if (machine_is_cns3420vb())
-		return CNS3XXX_UART0_BASE;
-	else
-		return 0;
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()

arch/arm/mach-cns3xxx/pcie.c

@@ -20,7 +20,7 @@
 #include <linux/interrupt.h>
 #include <linux/ptrace.h>
 #include <asm/mach/map.h>
-#include <mach/cns3xxx.h>
+#include "cns3xxx.h"
 #include "core.h"
 
 enum cns3xxx_access_type {

arch/arm/mach-cns3xxx/pm.c

@@ -11,8 +11,8 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/atomic.h>
-#include <mach/cns3xxx.h>
-#include <mach/pm.h>
+#include "cns3xxx.h"
+#include "pm.h"
 #include "core.h"
 
 void cns3xxx_pwr_clk_en(unsigned int block)

arch/arm/mach-exynos/Kconfig

@@ -14,6 +14,7 @@ menu "SAMSUNG EXYNOS SoCs Support"
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
 	default y
+	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -21,6 +22,7 @@ config ARCH_EXYNOS4
 
 config ARCH_EXYNOS5
 	bool "SAMSUNG EXYNOS5"
+	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	help
 	  Samsung EXYNOS5 (Cortex-A15) SoC based systems
@@ -87,6 +89,19 @@ config EXYNOS4_MCT
 	help
 	  Use MCT (Multi Core Timer) as kernel timers
 
+config EXYNOS_ATAGS
+	bool "ATAGS based boot for EXYNOS (deprecated)"
+	depends on !ARCH_MULTIPLATFORM
+	depends on ATAGS
+	default y
+	help
+	  The EXYNOS platform is moving towards being completely probed
+	  through device tree. This enables support for board files using
+	  the traditional ATAGS boot format.
+	  Note that this option is not available for multiplatform builds.
+
+if EXYNOS_ATAGS
+
 config EXYNOS_DEV_DMA
 	bool
 	help
@@ -391,6 +406,8 @@ config MACH_SMDK4412
 	  Machine support for Samsung SMDK4412
 endif
 
+endif
+
 comment "Flattened Device Tree based board for EXYNOS SoCs"
 
 config MACH_EXYNOS4_DT

arch/arm/mach-exynos/dev-uart.c

@@ -20,6 +20,7 @@
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
+#include <mach/irqs.h>
 
 #include <plat/devs.h>
 

arch/arm/mach-exynos/include/mach/irqs.h

@@ -466,7 +466,10 @@
 #define IRQ_TIMER_BASE			(IRQ_GPIO_END + 64)
 
 /* Set the default NR_IRQS */
+#define EXYNOS_NR_IRQS			(IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
 
-#define NR_IRQS				(IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
+#ifndef CONFIG_SPARSE_IRQ
+#define NR_IRQS				EXYNOS_NR_IRQS
+#endif
 
 #endif /* __ASM_ARCH_IRQS_H */

arch/arm/mach-exynos/mach-armlex4210.c

@@ -25,6 +25,7 @@
 #include <plat/regs-srom.h>
 #include <plat/sdhci.h>
 
+#include <mach/irqs.h>
 #include <mach/map.h>
 
 #include "common.h"

arch/arm/mach-exynos/mach-nuri.c

@@ -53,6 +53,7 @@
 #include <plat/fimc-core.h>
 #include <plat/camport.h>
 
+#include <mach/irqs.h>
 #include <mach/map.h>
 
 #include "common.h"

arch/arm/mach-exynos/mach-origen.c

@@ -46,6 +46,7 @@
 #include <plat/hdmi.h>
 
 #include <mach/map.h>
+#include <mach/irqs.h>
 
 #include <drm/exynos_drm.h>
 #include "common.h"

arch/arm/mach-exynos/mach-smdk4x12.c

@@ -39,6 +39,7 @@
 #include <plat/regs-serial.h>
 #include <plat/sdhci.h>
 
+#include <mach/irqs.h>
 #include <mach/map.h>
 
 #include <drm/exynos_drm.h>

arch/arm/mach-exynos/mach-smdkv310.c

@@ -43,6 +43,7 @@
 #include <plat/clock.h>
 #include <plat/hdmi.h>
 
+#include <mach/irqs.h>
 #include <mach/map.h>
 
 #include <drm/exynos_drm.h>

arch/arm/mach-exynos/setup-sdhci-gpio.c

@@ -19,8 +19,8 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 
+#include <mach/gpio.h>
 #include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
 #include <plat/sdhci.h>
 
 void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)

arch/arm/mach-highbank/Kconfig

@@ -12,6 +12,7 @@ config ARCH_HIGHBANK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select MAILBOX
 	select PL320_MBOX

arch/arm/mach-imx/Kconfig

@@ -795,7 +795,8 @@ config SOC_IMX6Q
 	select ARM_GIC
 	select COMMON_CLK
 	select CPU_V7
-	select HAVE_ARM_SCU
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC

arch/arm/mach-msm/Kconfig

@@ -44,10 +44,10 @@ endchoice
 
 config ARCH_MSM8X60
 	bool "MSM8X60"
-	select ARCH_MSM_SCORPIONMP
 	select ARM_GIC
 	select CPU_V7
 	select GPIO_MSM_V2
+	select HAVE_SMP
 	select MSM_GPIOMUX
 	select MSM_SCM if SMP
 	select MSM_V2_TLMM
@@ -55,9 +55,9 @@ config ARCH_MSM8X60
 
 config ARCH_MSM8960
 	bool "MSM8960"
-	select ARCH_MSM_SCORPIONMP
 	select ARM_GIC
 	select CPU_V7
+	select HAVE_SMP
 	select MSM_GPIOMUX
 	select MSM_SCM if SMP
 	select MSM_V2_TLMM
@@ -68,9 +68,6 @@ config MSM_HAS_DEBUG_UART_HS
 
 config MSM_SOC_REV_A
 	bool
-config  ARCH_MSM_SCORPIONMP
-	bool
-	select HAVE_SMP
 
 config  ARCH_MSM_ARM11
 	bool

arch/arm/mach-mxs/Kconfig

@@ -1,5 +1,3 @@
-if ARCH_MXS
-
 config SOC_IMX23
 	bool
 	select ARM_AMBA
@@ -17,14 +15,18 @@ config SOC_IMX28
 	select HAVE_PWM
 	select PINCTRL_IMX28
 
-comment "MXS platforms:"
-
-config MACH_MXS_DT
-	bool "Support MXS platforms from device tree"
+config ARCH_MXS
+	bool "Freescale MXS (i.MX23, i.MX28) support"
+	depends on ARCH_MULTI_V5
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select CLKSRC_OF
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK_PREPARE
+	select PINCTRL
 	select SOC_IMX23
 	select SOC_IMX28
+	select STMP_DEVICE
 	help
-	  Include support for Freescale MXS platforms(i.MX23 and i.MX28)
-	  using the device tree for discovery
-
-endif
+	  Support for Freescale MXS-based family of processors

arch/arm/mach-mxs/Makefile

@@ -1,2 +1,2 @@
 obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
+obj-$(CONFIG_ARCH_MXS) += mach-mxs.o

arch/arm/mach-mxs/Makefile.boot

@@ -1 +0,0 @@
-zreladdr-y += 0x40008000

arch/arm/mach-mxs/include/mach/timex.h

@@ -1,21 +0,0 @@
-/*
- *  Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_TIMEX_H__
-#define __MACH_MXS_TIMEX_H__
-
-#define CLOCK_TICK_RATE		32000	/* 32K */
-
-#endif /* __MACH_MXS_TIMEX_H__ */

arch/arm/mach-mxs/include/mach/uncompress.h

@@ -1,76 +0,0 @@
-/*
- *  arch/arm/mach-mxs/include/mach/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *  Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_MXS_UNCOMPRESS_H__
-#define __MACH_MXS_UNCOMPRESS_H__
-
-unsigned long mxs_duart_base;
-
-#define MXS_DUART(x)	(*(volatile unsigned long *)(mxs_duart_base + (x)))
-
-#define MXS_DUART_DR		0x00
-#define MXS_DUART_FR		0x18
-#define MXS_DUART_FR_TXFE	(1 << 7)
-#define MXS_DUART_CR		0x30
-#define MXS_DUART_CR_UARTEN	(1 << 0)
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. If it's not, the output is
- * simply discarded.
- */
-
-static void putc(int ch)
-{
-	if (!mxs_duart_base)
-		return;
-	if (!(MXS_DUART(MXS_DUART_CR) & MXS_DUART_CR_UARTEN))
-		return;
-
-	while (!(MXS_DUART(MXS_DUART_FR) & MXS_DUART_FR_TXFE))
-		barrier();
-
-	MXS_DUART(MXS_DUART_DR) = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-#define MX23_DUART_BASE_ADDR	0x80070000
-#define MX28_DUART_BASE_ADDR	0x80074000
-#define MXS_DIGCTL_CHIPID	0x8001c310
-
-static inline void __arch_decomp_setup(unsigned long arch_id)
-{
-	u16 chipid = (*(volatile unsigned long *) MXS_DIGCTL_CHIPID) >> 16;
-
-	switch (chipid) {
-	case 0x3780:
-		mxs_duart_base = MX23_DUART_BASE_ADDR;
-		break;
-	case 0x2800:
-		mxs_duart_base = MX28_DUART_BASE_ADDR;
-		break;
-	default:
-		break;
-	}
-}
-
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
-#endif /* __MACH_MXS_UNCOMPRESS_H__ */

arch/arm/mach-mxs/mach-mxs.c

@@ -32,6 +32,8 @@
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
+#include "pm.h"
+
 /* MXS DIGCTL SAIF CLKMUX */
 #define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
 #define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
@@ -607,6 +609,7 @@ DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
 	.handle_irq	= icoll_handle_irq,
 	.init_time	= mxs_timer_init,
 	.init_machine	= mxs_machine_init,
+	.init_late      = mxs_pm_init,
 	.dt_compat	= mxs_dt_compat,
 	.restart	= mxs_restart,
 MACHINE_END

arch/arm/mach-mxs/pm.c

@@ -34,9 +34,7 @@ static struct platform_suspend_ops mxs_suspend_ops = {
 	.valid = suspend_valid_only_mem,
 };
 
-static int __init mxs_pm_init(void)
+void __init mxs_pm_init(void)
 {
 	suspend_set_ops(&mxs_suspend_ops);
-	return 0;
 }
-device_initcall(mxs_pm_init);

arch/arm/mach-mxs/pm.h

@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_MXS_PM_H
+#define __ARCH_MXS_PM_H
+
+void mxs_pm_init(void);
+
+#endif

arch/arm/mach-nomadik/Kconfig

@@ -1,5 +1,24 @@
-if ARCH_NOMADIK
+config ARCH_NOMADIK
+	bool "ST-Ericsson Nomadik"
+	depends on ARCH_MULTI_V5
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select ARM_VIC
+	select CLKSRC_NOMADIK_MTU
+	select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
+	select COMMON_CLK
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
+	select PINCTRL
+	select PINCTRL_NOMADIK
+	select PINCTRL_STN8815
+	select SPARSE_IRQ
+	select USE_OF
+	help
+	  Support for the Nomadik platform by ST-Ericsson
 
+if ARCH_NOMADIK
 menu "Nomadik boards"
 
 config MACH_NOMADIK_8815NHK
@@ -9,8 +28,8 @@ config MACH_NOMADIK_8815NHK
 	select I2C_ALGOBIT
 
 endmenu
+endif
 
 config NOMADIK_8815
+	depends on ARCH_NOMADIK
 	bool
-
-endif

arch/arm/mach-nomadik/Makefile.boot

@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-

arch/arm/mach-nomadik/cpu-8815.c

@@ -38,7 +38,6 @@
 #include <linux/gpio.h>
 #include <linux/amba/mmci.h>
 
-#include <mach/irqs.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>

arch/arm/mach-nomadik/include/mach/irqs.h

@@ -1,79 +0,0 @@
-/*
- *  mach-nomadik/include/mach/irqs.h
- *
- *  Copyright (C) ST Microelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_VIC_START		32	/* first VIC interrupt is 1 */
-
-/*
- * Interrupt numbers generic for all Nomadik Chip cuts
- */
-#define IRQ_WATCHDOG			(IRQ_VIC_START+0)
-#define IRQ_SOFTINT			(IRQ_VIC_START+1)
-#define IRQ_CRYPTO			(IRQ_VIC_START+2)
-#define IRQ_OWM				(IRQ_VIC_START+3)
-#define IRQ_MTU0			(IRQ_VIC_START+4)
-#define IRQ_MTU1			(IRQ_VIC_START+5)
-#define IRQ_GPIO0			(IRQ_VIC_START+6)
-#define IRQ_GPIO1			(IRQ_VIC_START+7)
-#define IRQ_GPIO2			(IRQ_VIC_START+8)
-#define IRQ_GPIO3			(IRQ_VIC_START+9)
-#define IRQ_RTC_RTT			(IRQ_VIC_START+10)
-#define IRQ_SSP				(IRQ_VIC_START+11)
-#define IRQ_UART0			(IRQ_VIC_START+12)
-#define IRQ_DMA1			(IRQ_VIC_START+13)
-#define IRQ_CLCD_MDIF			(IRQ_VIC_START+14)
-#define IRQ_DMA0			(IRQ_VIC_START+15)
-#define IRQ_PWRFAIL			(IRQ_VIC_START+16)
-#define IRQ_UART1			(IRQ_VIC_START+17)
-#define IRQ_FIRDA			(IRQ_VIC_START+18)
-#define IRQ_MSP0			(IRQ_VIC_START+19)
-#define IRQ_I2C0			(IRQ_VIC_START+20)
-#define IRQ_I2C1			(IRQ_VIC_START+21)
-#define IRQ_SDMMC			(IRQ_VIC_START+22)
-#define IRQ_USBOTG			(IRQ_VIC_START+23)
-#define IRQ_SVA_IT0			(IRQ_VIC_START+24)
-#define IRQ_SVA_IT1			(IRQ_VIC_START+25)
-#define IRQ_SAA_IT0			(IRQ_VIC_START+26)
-#define IRQ_SAA_IT1			(IRQ_VIC_START+27)
-#define IRQ_UART2			(IRQ_VIC_START+28)
-#define IRQ_MSP2			(IRQ_VIC_START+29)
-#define IRQ_L2CC			(IRQ_VIC_START+30)
-#define IRQ_HPI				(IRQ_VIC_START+31)
-#define IRQ_SKE				(IRQ_VIC_START+32)
-#define IRQ_KP				(IRQ_VIC_START+33)
-#define IRQ_MEMST			(IRQ_VIC_START+34)
-#define IRQ_SGA_IT			(IRQ_VIC_START+35)
-#define IRQ_USBM			(IRQ_VIC_START+36)
-#define IRQ_MSP1			(IRQ_VIC_START+37)
-
-#define NOMADIK_GPIO_OFFSET		(IRQ_VIC_START+64)
-
-/* After chip-specific IRQ numbers we have the GPIO ones */
-#define NOMADIK_NR_GPIO			128 /* last 4 not wired to pins */
-#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + NOMADIK_GPIO_OFFSET)
-#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - NOMADIK_GPIO_OFFSET)
-#define NOMADIK_NR_IRQS			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
-
-/* Following two are used by entry_macro.S, to access our dual-vic */
-#define VIC_REG_IRQSR0		0
-#define VIC_REG_IRQSR1		0x20
-
-#endif /* __ASM_ARCH_IRQS_H */

arch/arm/mach-nomadik/include/mach/timex.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE         2400000
-
-#endif

arch/arm/mach-nomadik/include/mach/uncompress.h

@@ -1,60 +0,0 @@
-/*
- *  Copyright (C) 2008 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/setup.h>
-#include <asm/io.h>
-
-/* we need the constants in amba/serial.h, but it refers to amba_device */
-struct amba_device;
-#include <linux/amba/serial.h>
-
-#define NOMADIK_UART_DR		(void __iomem *)0x101FB000
-#define NOMADIK_UART_LCRH	(void __iomem *)0x101FB02c
-#define NOMADIK_UART_CR		(void __iomem *)0x101FB030
-#define NOMADIK_UART_FR		(void __iomem *)0x101FB018
-
-static void putc(const char c)
-{
-	/* Do nothing if the UART is not enabled. */
-	if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
-		return;
-
-	if (c == '\n')
-		putc('\r');
-
-	while (readb(NOMADIK_UART_FR) & UART01x_FR_TXFF)
-		barrier();
-	writeb(c, NOMADIK_UART_DR);
-}
-
-static void flush(void)
-{
-	if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
-		return;
-	while (readb(NOMADIK_UART_FR) & UART01x_FR_BUSY)
-		barrier();
-}
-
-static inline void arch_decomp_setup(void)
-{
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-omap2/Kconfig

@@ -91,6 +91,8 @@ config ARCH_OMAP4
 	select ARM_GIC
 	select CACHE_L2X0
 	select CPU_V7
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select LOCAL_TIMERS if SMP
 	select OMAP_INTERCONNECT

arch/arm/mach-prima2/Kconfig

@@ -1,3 +1,15 @@
+config ARCH_SIRF
+	bool "CSR SiRF" if ARCH_MULTI_V7
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select MIGHT_HAVE_CACHE_L2X0
+	select NO_IOPORT
+	select PINCTRL
+	select PINCTRL_SIRF
+	help
+	  Support for CSR SiRFprimaII/Marco/Polo platforms
+
 if ARCH_SIRF
 
 menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
@@ -24,6 +36,7 @@ config ARCH_MARCO
 	default y
 	select ARM_GIC
 	select CPU_V7
+	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	select SMP_ON_UP
 	help

arch/arm/mach-prima2/Makefile

@@ -4,8 +4,7 @@ obj-y += rtciobrg.o
 obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_CACHE_L2X0) += l2x0.o
 obj-$(CONFIG_SUSPEND) += pm.o sleep.o
-obj-$(CONFIG_SIRF_IRQ) += irq.o
 obj-$(CONFIG_SMP) += platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)  += hotplug.o
-obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
-obj-$(CONFIG_ARCH_MARCO) += timer-marco.o
+
+CFLAGS_hotplug.o += -march=armv7-a

arch/arm/mach-prima2/common.c

@@ -6,6 +6,7 @@
  * Licensed under GPLv2 or later.
  */
 
+#include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/irqchip.h>
@@ -31,6 +32,13 @@ void __init sirfsoc_init_late(void)
 	sirfsoc_pm_init();
 }
 
+static __init void sirfsoc_init_time(void)
+{
+	/* initialize clocking early, we want to set the OS timer */
+	sirfsoc_of_clk_init();
+	clocksource_of_init();
+}
+
 static __init void sirfsoc_map_io(void)
 {
 	sirfsoc_map_lluart();
@@ -45,12 +53,10 @@ static const char *atlas6_dt_match[] __initdata = {
 
 DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
+	.nr_irqs	= 128,
 	.map_io         = sirfsoc_map_io,
-	.init_irq	= sirfsoc_of_irq_init,
-	.init_time	= sirfsoc_prima2_timer_init,
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-	.handle_irq     = sirfsoc_handle_irq,
-#endif
+	.init_irq	= irqchip_init,
+	.init_time	= sirfsoc_init_time,
 	.init_machine	= sirfsoc_mach_init,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = atlas6_dt_match,
@@ -66,12 +72,10 @@ static const char *prima2_dt_match[] __initdata = {
 
 DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
+	.nr_irqs	= 128,
 	.map_io         = sirfsoc_map_io,
-	.init_irq	= sirfsoc_of_irq_init,
-	.init_time	= sirfsoc_prima2_timer_init,
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-	.handle_irq     = sirfsoc_handle_irq,
-#endif
+	.init_irq	= irqchip_init,
+	.init_time	= sirfsoc_init_time,
 	.dma_zone_size	= SZ_256M,
 	.init_machine	= sirfsoc_mach_init,
 	.init_late	= sirfsoc_init_late,
@@ -91,7 +95,7 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)")
 	.smp            = smp_ops(sirfsoc_smp_ops),
 	.map_io         = sirfsoc_map_io,
 	.init_irq	= irqchip_init,
-	.init_time	= sirfsoc_marco_timer_init,
+	.init_time	= sirfsoc_init_time,
 	.init_machine	= sirfsoc_mach_init,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = marco_dt_match,

arch/arm/mach-prima2/common.h

@@ -13,8 +13,8 @@
 #include <asm/mach/time.h>
 #include <asm/exception.h>
 
-extern void sirfsoc_prima2_timer_init(void);
-extern void sirfsoc_marco_timer_init(void);
+#define SIRFSOC_VA_BASE		_AC(0xFEC00000, UL)
+#define SIRFSOC_VA(x)		(SIRFSOC_VA_BASE + ((x) & 0x00FFF000))
 
 extern struct smp_operations   sirfsoc_smp_ops;
 extern void sirfsoc_secondary_startup(void);

arch/arm/mach-prima2/include/mach/clkdev.h

@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/clkdev.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_CLKDEV_H
-#define __MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif

arch/arm/mach-prima2/include/mach/debug-macro.S

@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/debug-macro.S
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <mach/hardware.h>
-#include <mach/uart.h>
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =SIRFSOC_UART1_PA_BASE		@ physical
-	ldr	\rv, =SIRFSOC_UART1_VA_BASE		@ virtual
-	.endm
-
-	.macro	senduart,rd,rx
-	str	\rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA]
-	.endm
-
-	.macro	busyuart,rd,rx
-	.endm
-
-	.macro	waituart,rd,rx
-1001:	ldr	\rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS]
-	tst	\rd, #SIRFSOC_UART1_TXFIFO_EMPTY
-	beq	1001b
-	.endm
-

arch/arm/mach-prima2/include/mach/entry-macro.S

@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/entry-macro.S
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <mach/hardware.h>
-
-#define SIRFSOC_INT_ID 0x38
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr     \base, =sirfsoc_intc_base
-	ldr     \base, [\base]
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr \irqnr, [\base, #SIRFSOC_INT_ID]	@ Get the highest priority irq
-	cmp \irqnr, #0x40			@ the irq num can't be larger than 0x3f
-	movges \irqnr, #0
-	.endm

arch/arm/mach-prima2/include/mach/hardware.h

@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/hardware.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_HARDWARE_H__
-#define __MACH_HARDWARE_H__
-
-#include <asm/sizes.h>
-#include <mach/map.h>
-
-#endif

arch/arm/mach-prima2/include/mach/irqs.h

@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/irqs.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define SIRFSOC_INTENAL_IRQ_START  0
-#define SIRFSOC_INTENAL_IRQ_END    127
-#define SIRFSOC_GPIO_IRQ_START     (SIRFSOC_INTENAL_IRQ_END + 1)
-#define NR_IRQS	288
-
-#endif

arch/arm/mach-prima2/include/mach/map.h

@@ -1,18 +0,0 @@
-/*
- * memory & I/O static mapping definitions for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_PRIMA2_MAP_H__
-#define __MACH_PRIMA2_MAP_H__
-
-#include <linux/const.h>
-
-#define SIRFSOC_VA_BASE		_AC(0xFEC00000, UL)
-
-#define SIRFSOC_VA(x)		(SIRFSOC_VA_BASE + ((x) & 0x00FFF000))
-
-#endif

arch/arm/mach-prima2/include/mach/timex.h

@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/timex.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_TIMEX_H__
-#define __MACH_TIMEX_H__
-
-#define CLOCK_TICK_RATE  1000000
-
-#endif

arch/arm/mach-prima2/include/mach/uncompress.h

@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/uncompress.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/uart.h>
-
-void arch_decomp_setup(void)
-{
-}
-
-static __inline__ void putc(char c)
-{
-	/*
-	 * during kernel decompression, all mappings are flat:
-	 *  virt_addr == phys_addr
-	 */
-	if (!SIRFSOC_UART1_PA_BASE)
-		return;
-
-	while (__raw_readl((void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
-		& SIRFSOC_UART1_TXFIFO_FULL)
-		barrier();
-
-	__raw_writel(c, (void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA);
-}
-
-static inline void flush(void)
-{
-}
-
-#endif
-

arch/arm/mach-prima2/irq.c

@@ -1,129 +0,0 @@
-/*
- * interrupt controller support for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/irqdomain.h>
-#include <linux/syscore_ops.h>
-#include <asm/mach/irq.h>
-#include <asm/exception.h>
-#include <mach/hardware.h>
-
-#define SIRFSOC_INT_RISC_MASK0          0x0018
-#define SIRFSOC_INT_RISC_MASK1          0x001C
-#define SIRFSOC_INT_RISC_LEVEL0         0x0020
-#define SIRFSOC_INT_RISC_LEVEL1         0x0024
-#define SIRFSOC_INIT_IRQ_ID		0x0038
-
-void __iomem *sirfsoc_intc_base;
-
-static __init void
-sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	gc = irq_alloc_generic_chip("SIRFINTC", 1, irq_start, base, handle_level_irq);
-	ct = gc->chip_types;
-
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
-	ct->regs.mask = SIRFSOC_INT_RISC_MASK0;
-
-	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, 0);
-}
-
-static __init void sirfsoc_irq_init(void)
-{
-	sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32);
-	sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32,
-			SIRFSOC_INTENAL_IRQ_END + 1 - 32);
-
-	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
-	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
-
-	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
-	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
-}
-
-asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs)
-{
-	u32 irqstat, irqnr;
-
-	irqstat = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INIT_IRQ_ID);
-	irqnr = irqstat & 0xff;
-
-	handle_IRQ(irqnr, regs);
-}
-
-static struct of_device_id intc_ids[]  = {
-	{ .compatible = "sirf,prima2-intc" },
-	{},
-};
-
-void __init sirfsoc_of_irq_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, intc_ids);
-	if (!np)
-		return;
-
-	sirfsoc_intc_base = of_iomap(np, 0);
-	if (!sirfsoc_intc_base)
-		panic("unable to map intc cpu registers\n");
-
-	irq_domain_add_legacy(np, SIRFSOC_INTENAL_IRQ_END + 1, 0, 0,
-		&irq_domain_simple_ops, NULL);
-
-	of_node_put(np);
-
-	sirfsoc_irq_init();
-}
-
-struct sirfsoc_irq_status {
-	u32 mask0;
-	u32 mask1;
-	u32 level0;
-	u32 level1;
-};
-
-static struct sirfsoc_irq_status sirfsoc_irq_st;
-
-static int sirfsoc_irq_suspend(void)
-{
-	sirfsoc_irq_st.mask0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
-	sirfsoc_irq_st.mask1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
-	sirfsoc_irq_st.level0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
-	sirfsoc_irq_st.level1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
-
-	return 0;
-}
-
-static void sirfsoc_irq_resume(void)
-{
-	writel_relaxed(sirfsoc_irq_st.mask0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
-	writel_relaxed(sirfsoc_irq_st.mask1, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
-	writel_relaxed(sirfsoc_irq_st.level0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
-	writel_relaxed(sirfsoc_irq_st.level1, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
-}
-
-static struct syscore_ops sirfsoc_irq_syscore_ops = {
-	.suspend	= sirfsoc_irq_suspend,
-	.resume		= sirfsoc_irq_resume,
-};
-
-static int __init sirfsoc_irq_pm_init(void)
-{
-	register_syscore_ops(&sirfsoc_irq_syscore_ops);
-	return 0;
-}
-device_initcall(sirfsoc_irq_pm_init);

arch/arm/mach-prima2/lluart.c

@@ -9,8 +9,18 @@
 #include <linux/kernel.h>
 #include <asm/page.h>
 #include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/uart.h>
+#include "common.h"
+
+#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1)
+#define SIRFSOC_UART1_PA_BASE          0xb0060000
+#elif defined(CONFIG_DEBUG_SIRFMARCO_UART1)
+#define SIRFSOC_UART1_PA_BASE          0xcc060000
+#else
+#define SIRFSOC_UART1_PA_BASE          0
+#endif
+
+#define SIRFSOC_UART1_VA_BASE          SIRFSOC_VA(0x060000)
+#define SIRFSOC_UART1_SIZE		SZ_4K
 
 void __init sirfsoc_map_lluart(void)
 {

arch/arm/mach-prima2/platsmp.c

@@ -17,7 +17,6 @@
 #include <asm/smp_scu.h>
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
-#include <mach/map.h>
 
 #include "common.h"
 

arch/arm/mach-realview/Kconfig

@@ -12,6 +12,8 @@ config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -23,6 +25,8 @@ config REALVIEW_EB_ARM11MP
 	depends on MACH_REALVIEW_EB
 	select ARCH_HAS_BARRIERS if SMP
 	select CPU_V6K
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -43,6 +47,8 @@ config MACH_REALVIEW_PB11MP
 	select ARCH_HAS_BARRIERS if SMP
 	select ARM_GIC
 	select CPU_V6K
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
@@ -85,6 +91,8 @@ config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore"
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ARM_GIC
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0

arch/arm/mach-s3c24xx/include/mach/debug-macro.S

@@ -98,4 +98,4 @@
 
 /* include the reset of the code which will do the work */
 
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>

arch/arm/mach-s3c64xx/include/mach/debug-macro.S

@@ -35,4 +35,4 @@
  * will be fine with us.
  */
 
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>

arch/arm/mach-s5p64x0/include/mach/debug-macro.S

@@ -30,4 +30,4 @@
 #endif
 	.endm
 
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>

arch/arm/mach-s5pc100/include/mach/debug-macro.S

@@ -36,4 +36,4 @@
  * will be fine with us.
  */
 
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>

arch/arm/mach-s5pc100/setup-sdhci-gpio.c

@@ -19,7 +19,6 @@
 #include <linux/mmc/card.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
 #include <plat/sdhci.h>
 
 void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)

arch/arm/mach-s5pv210/include/mach/debug-macro.S

@@ -38,4 +38,4 @@
  * will be fine with us.
  */
 
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>

arch/arm/mach-s5pv210/setup-sdhci-gpio.c

@@ -20,7 +20,6 @@
 #include <linux/mmc/card.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
 #include <plat/sdhci.h>
 
 void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)

arch/arm/mach-spear/Kconfig

@@ -0,0 +1,105 @@
+#
+# SPEAr Platform configuration file
+#
+
+menuconfig PLAT_SPEAR
+	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
+	default PLAT_SPEAR_SINGLE
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+
+if PLAT_SPEAR
+
+config ARCH_SPEAR13XX
+	bool "ST SPEAr13xx"
+	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
+	select ARCH_HAS_CPUFREQ
+	select ARM_GIC
+	select CPU_V7
+	select GPIO_SPEAR_SPICS
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
+	select PINCTRL
+	select USE_OF
+	help
+	  Supports for ARM's SPEAR13XX family
+
+if ARCH_SPEAR13XX
+
+config MACH_SPEAR1310
+	bool "SPEAr1310 Machine support with Device Tree"
+	select PINCTRL_SPEAR1310
+	help
+	  Supports ST SPEAr1310 machine configured via the device-tree
+
+config MACH_SPEAR1340
+	bool "SPEAr1340 Machine support with Device Tree"
+	select PINCTRL_SPEAR1340
+	help
+	  Supports ST SPEAr1340 machine configured via the device-tree
+
+endif #ARCH_SPEAR13XX
+
+config ARCH_SPEAR3XX
+	bool "ST SPEAr3xx"
+	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on !ARCH_SPEAR13XX
+	select ARM_VIC
+	select CPU_ARM926T
+	select PINCTRL
+	select USE_OF
+	help
+	  Supports for ARM's SPEAR3XX family
+
+if ARCH_SPEAR3XX
+
+config MACH_SPEAR300
+	bool "SPEAr300 Machine support with Device Tree"
+	select PINCTRL_SPEAR300
+	help
+	  Supports ST SPEAr300 machine configured via the device-tree
+
+config MACH_SPEAR310
+	bool "SPEAr310 Machine support with Device Tree"
+	select PINCTRL_SPEAR310
+	help
+	  Supports ST SPEAr310 machine configured via the device-tree
+
+config MACH_SPEAR320
+	bool "SPEAr320 Machine support with Device Tree"
+	select PINCTRL_SPEAR320
+	help
+	  Supports ST SPEAr320 machine configured via the device-tree
+
+endif
+
+config ARCH_SPEAR6XX
+	bool "ST SPEAr6XX"
+	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on !ARCH_SPEAR13XX
+	select ARM_VIC
+	select CPU_ARM926T
+	help
+	  Supports for ARM's SPEAR6XX family
+
+config MACH_SPEAR600
+	def_bool y
+	depends on ARCH_SPEAR6XX
+	select USE_OF
+	help
+	  Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig"
+
+config ARCH_SPEAR_AUTO
+	def_bool PLAT_SPEAR_SINGLE
+	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
+	select ARCH_SPEAR3XX
+
+endif
+

arch/arm/mach-spear/Makefile

@@ -0,0 +1,26 @@
+#
+# SPEAr Platform specific Makefile
+#
+
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
+# Common support
+obj-y	:= restart.o time.o
+
+obj-$(CONFIG_SMP)		+= headsmp.o platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+
+obj-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx.o
+obj-$(CONFIG_MACH_SPEAR1310)	+= spear1310.o
+obj-$(CONFIG_MACH_SPEAR1340)	+= spear1340.o
+
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= spear3xx.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= pl080.o
+obj-$(CONFIG_MACH_SPEAR300)	+= spear300.o
+obj-$(CONFIG_MACH_SPEAR310)	+= spear310.o
+obj-$(CONFIG_MACH_SPEAR320)	+= spear320.o
+
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= spear6xx.o
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= pl080.o
+
+CFLAGS_hotplug.o		+= -march=armv7-a

arch/arm/mach-spear13xx/include/mach/generic.h → arch/arm/mach-spear/generic.h

@@ -1,9 +1,8 @@
 /*
- * arch/arm/mach-spear13xx/include/mach/generic.h
+ * spear machine family generic header file
  *
- * spear13xx machine family generic header file
- *
- * Copyright (C) 2012 ST Microelectronics
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Rajeev Kumar <rajeev-dlh.kumar@st.com>
  * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
@@ -15,37 +14,46 @@
 #define __MACH_GENERIC_H
 
 #include <linux/dmaengine.h>
+#include <linux/amba/pl08x.h>
+#include <linux/init.h>
 #include <asm/mach/time.h>
 
-/* Add spear13xx structure declarations here */
 extern void spear13xx_timer_init(void);
+extern void spear3xx_timer_init(void);
 extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
 extern struct dw_dma_platform_data dmac_plat_data;
 extern struct dw_dma_slave cf_dma_priv;
 extern struct dw_dma_slave nand_read_dma_priv;
 extern struct dw_dma_slave nand_write_dma_priv;
+bool dw_dma_filter(struct dma_chan *chan, void *slave);
 
-/* Add spear13xx family function declarations here */
 void __init spear_setup_of_timer(void);
+void __init spear3xx_clk_init(void __iomem *misc_base,
+			      void __iomem *soc_config_base);
+void __init spear3xx_map_io(void);
+void __init spear3xx_dt_init_irq(void);
+void __init spear6xx_clk_init(void __iomem *misc_base);
 void __init spear13xx_map_io(void);
 void __init spear13xx_l2x0_init(void);
-bool dw_dma_filter(struct dma_chan *chan, void *slave);
+
 void spear_restart(char, const char *);
+
 void spear13xx_secondary_startup(void);
 void __cpuinit spear13xx_cpu_die(unsigned int cpu);
 
 extern struct smp_operations spear13xx_smp_ops;
 
 #ifdef CONFIG_MACH_SPEAR1310
-void __init spear1310_clk_init(void);
+void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base);
 #else
-static inline void spear1310_clk_init(void) {}
+static inline void spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base) {}
 #endif
 
 #ifdef CONFIG_MACH_SPEAR1340
-void __init spear1340_clk_init(void);
+void __init spear1340_clk_init(void __iomem *misc_base);
 #else
-static inline void spear1340_clk_init(void) {}
+static inline void spear1340_clk_init(void __iomem *misc_base) {}
 #endif
 
 #endif /* __MACH_GENERIC_H */

arch/arm/mach-spear6xx/include/mach/irqs.h → arch/arm/mach-spear/include/mach/irqs.h

@@ -1,10 +1,9 @@
 /*
- * arch/arm/mach-spear6xx/include/mach/irqs.h
+ * IRQ helper macros for spear machine family
  *
- * IRQ helper macros for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Rajeev Kumar <rajeev-dlh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -14,6 +13,11 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
+#ifdef CONFIG_ARCH_SPEAR3XX
+#define NR_IRQS			256
+#endif
+
+#ifdef CONFIG_ARCH_SPEAR6XX
 /* IRQ definitions */
 /* VIC 1 */
 #define IRQ_VIC_END				64
@@ -21,5 +25,11 @@
 /* GPIO pins virtual irqs */
 #define VIRTUAL_IRQS				24
 #define NR_IRQS					(IRQ_VIC_END + VIRTUAL_IRQS)
+#endif
+
+#ifdef CONFIG_ARCH_SPEAR13XX
+#define IRQ_GIC_END			160
+#define NR_IRQS				IRQ_GIC_END
+#endif
 
-#endif	/* __MACH_IRQS_H */
+#endif /* __MACH_IRQS_H */

arch/arm/mach-spear3xx/include/mach/misc_regs.h → arch/arm/mach-spear/include/mach/misc_regs.h

@@ -16,7 +16,7 @@
 
 #include <mach/spear.h>
 
-#define MISC_BASE		IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
+#define MISC_BASE		(VA_SPEAR_ICM3_MISC_REG_BASE)
 #define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
 
 #endif /* __MACH_MISC_REGS_H */

arch/arm/mach-spear/include/mach/spear.h

@@ -0,0 +1,95 @@
+/*
+ * SPEAr3xx/6xx Machine family specific definition
+ *
+ * Copyright (C) 2009,2012 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR_H
+#define __MACH_SPEAR_H
+
+#include <asm/memory.h>
+
+#if defined(CONFIG_ARCH_SPEAR3XX) || defined (CONFIG_ARCH_SPEAR6XX)
+
+/* ICM1 - Low speed connection */
+#define SPEAR_ICM1_2_BASE		UL(0xD0000000)
+#define VA_SPEAR_ICM1_2_BASE		IOMEM(0xFD000000)
+#define SPEAR_ICM1_UART_BASE		UL(0xD0000000)
+#define VA_SPEAR_ICM1_UART_BASE		(VA_SPEAR_ICM1_2_BASE - SPEAR_ICM1_2_BASE + SPEAR_ICM1_UART_BASE)
+#define SPEAR3XX_ICM1_SSP_BASE		UL(0xD0100000)
+
+/* ML-1, 2 - Multi Layer CPU Subsystem */
+#define SPEAR_ICM3_ML1_2_BASE		UL(0xF0000000)
+#define VA_SPEAR6XX_ML_CPU_BASE		IOMEM(0xF0000000)
+
+/* ICM3 - Basic Subsystem */
+#define SPEAR_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
+#define VA_SPEAR_ICM3_SMI_CTRL_BASE	IOMEM(0xFC000000)
+#define SPEAR_ICM3_DMA_BASE		UL(0xFC400000)
+#define SPEAR_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
+#define VA_SPEAR_ICM3_SYS_CTRL_BASE	(VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_SYS_CTRL_BASE)
+#define SPEAR_ICM3_MISC_REG_BASE	UL(0xFCA80000)
+#define VA_SPEAR_ICM3_MISC_REG_BASE	(VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_MISC_REG_BASE)
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE		SPEAR_ICM1_UART_BASE
+#define VA_SPEAR_DBG_UART_BASE		VA_SPEAR_ICM1_UART_BASE
+
+/* Sysctl base for spear platform */
+#define SPEAR_SYS_CTRL_BASE		SPEAR_ICM3_SYS_CTRL_BASE
+#define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR_ICM3_SYS_CTRL_BASE
+#endif /* SPEAR3xx || SPEAR6XX */
+
+/* SPEAr320 Macros */
+#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
+#define VA_SPEAR320_SOC_CONFIG_BASE	IOMEM(0xFE000000)
+
+#ifdef CONFIG_ARCH_SPEAR13XX
+
+#define PERIP_GRP2_BASE				UL(0xB3000000)
+#define VA_PERIP_GRP2_BASE			IOMEM(0xFE000000)
+#define MCIF_SDHCI_BASE				UL(0xB3000000)
+#define SYSRAM0_BASE				UL(0xB3800000)
+#define VA_SYSRAM0_BASE				IOMEM(0xFE800000)
+#define SYS_LOCATION				(VA_SYSRAM0_BASE + 0x600)
+
+#define PERIP_GRP1_BASE				UL(0xE0000000)
+#define VA_PERIP_GRP1_BASE			IOMEM(0xFD000000)
+#define UART_BASE				UL(0xE0000000)
+#define VA_UART_BASE				IOMEM(0xFD000000)
+#define SSP_BASE				UL(0xE0100000)
+#define MISC_BASE				UL(0xE0700000)
+#define VA_MISC_BASE				IOMEM(0xFD700000)
+
+#define A9SM_AND_MPMC_BASE			UL(0xEC000000)
+#define VA_A9SM_AND_MPMC_BASE			IOMEM(0xFC000000)
+
+#define SPEAR1310_RAS_BASE			UL(0xD8400000)
+#define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))
+
+/* A9SM peripheral offsets */
+#define A9SM_PERIP_BASE				UL(0xEC800000)
+#define VA_A9SM_PERIP_BASE			IOMEM(0xFC800000)
+#define VA_SCU_BASE				(VA_A9SM_PERIP_BASE + 0x00)
+
+#define L2CC_BASE				UL(0xED000000)
+#define VA_L2CC_BASE				IOMEM(UL(0xFB000000))
+
+/* others */
+#define DMAC0_BASE				UL(0xEA800000)
+#define DMAC1_BASE				UL(0xEB000000)
+#define MCIF_CF_BASE				UL(0xB2800000)
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE			UART_BASE
+#define VA_SPEAR_DBG_UART_BASE			VA_UART_BASE
+
+#endif /* SPEAR13XX */
+
+#endif /* __MACH_SPEAR_H */