leds: Modify PC Engines apu/apu2 driver to support apu3

PC Engines apu3 is an improved version of the apu2, using the same SoC
and almost everything else.

This patch reuses as much as possible from the apu2 definitions, to
avoid redundancy.

Signed-off-by: Raffaello D. Di Napoli <rafdev@dinapo.li>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

drivers/leds/Kconfig

@@ -57,12 +57,13 @@ config LEDS_AAT1290
 	depends on PINCTRL
 	help
 	 This option enables support for the LEDs on the AAT1290.
+
 config LEDS_APU
-	tristate "Front panel LED support for PC Engines APU/APU2 boards"
+	tristate "Front panel LED support for PC Engines APU/APU2/APU3 boards"
 	depends on LEDS_CLASS
 	depends on X86 && DMI
 	help
-	  This driver makes the PC Engines APU/APU2 front panel LEDs
+	  This driver makes the PC Engines APU/APU2/APU3 front panel LEDs
 	  accessible from userspace programs through the LED subsystem.
 
 	  To compile this driver as a module, choose M here: the

drivers/leds/leds-apu.c

@@ -102,6 +102,13 @@ static const struct apu_led_profile apu2_led_profile[] = {
 	{ "apu2:green:3", LED_OFF, APU2_FCH_GPIO_BASE + 70 * APU2_IOSIZE },
 };
 
+/* Same as apu2_led_profile, but with "3" in the LED names. */
+static const struct apu_led_profile apu3_led_profile[] = {
+	{ "apu3:green:1", LED_ON,  APU2_FCH_GPIO_BASE + 68 * APU2_IOSIZE },
+	{ "apu3:green:2", LED_OFF, APU2_FCH_GPIO_BASE + 69 * APU2_IOSIZE },
+	{ "apu3:green:3", LED_OFF, APU2_FCH_GPIO_BASE + 70 * APU2_IOSIZE },
+};
+
 static const struct dmi_system_id apu_led_dmi_table[] __initconst = {
 	{
 		.ident = "apu",
@@ -134,6 +141,30 @@ static const struct dmi_system_id apu_led_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu2")
 		}
 	},
+	/* PC Engines APU3 with "Legacy" bios < 4.0.8 */
+	{
+		.ident = "apu3",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+			DMI_MATCH(DMI_BOARD_NAME, "APU3")
+		}
+	},
+	/* PC Engines APU3 with "Legacy" bios >= 4.0.8 */
+	{
+		.ident = "apu3",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+			DMI_MATCH(DMI_BOARD_NAME, "apu3")
+		}
+	},
+	/* PC Engines APU2 with "Mainline" bios */
+	{
+		.ident = "apu3",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+			DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu3")
+		}
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(dmi, apu_led_dmi_table);
@@ -235,6 +266,14 @@ static int __init apu_led_probe(struct platform_device *pdev)
 		apu_led->platform = APU2_LED_PLATFORM;
 		apu_led->num_led_instances = ARRAY_SIZE(apu2_led_profile);
 		apu_led->iosize = APU2_IOSIZE;
+	} else if (dmi_match(DMI_BOARD_NAME, "APU3") ||
+		   dmi_match(DMI_BOARD_NAME, "apu3") ||
+		   dmi_match(DMI_BOARD_NAME, "PC Engines apu3")) {
+		apu_led->profile = apu3_led_profile;
+		/* Otherwise identical to APU2. */
+		apu_led->platform = APU2_LED_PLATFORM;
+		apu_led->num_led_instances = ARRAY_SIZE(apu3_led_profile);
+		apu_led->iosize = APU2_IOSIZE;
 	}
 
 	spin_lock_init(&apu_led->lock);
@@ -259,7 +298,10 @@ static int __init apu_led_init(void)
 	if (!(dmi_match(DMI_PRODUCT_NAME, "APU") ||
 	      dmi_match(DMI_PRODUCT_NAME, "APU2") ||
 	      dmi_match(DMI_PRODUCT_NAME, "apu2") ||
-	      dmi_match(DMI_PRODUCT_NAME, "PC Engines apu2"))) {
+	      dmi_match(DMI_PRODUCT_NAME, "PC Engines apu2") ||
+	      dmi_match(DMI_PRODUCT_NAME, "APU3") ||
+	      dmi_match(DMI_PRODUCT_NAME, "apu3") ||
+	      dmi_match(DMI_PRODUCT_NAME, "PC Engines apu3"))) {
 		pr_err("Unknown PC Engines board: %s\n",
 				dmi_get_system_info(DMI_PRODUCT_NAME));
 		return -ENODEV;