be2net: cleanup FW flash image related macro defines

Many constant definitions relating to the FW-image layout
(such as section offset values) were defined in decimal format rather than
hexa-decimal. This makes this part of the code un-readable. Also some
defines related to BE2 are labeld "g2" and defines related to BE3 are
labeled "g3".  This patch cleans up all of this to make this code more
readable.

Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be_cmds.h

@@ -1207,68 +1207,85 @@ struct be_cmd_resp_get_beacon_state {
 /* Flashrom related descriptors */
 #define MAX_FLASH_COMP			32
 
-#define OPTYPE_ISCSI_ACTIVE		0
-#define OPTYPE_REDBOOT			1
-#define OPTYPE_BIOS			2
-#define OPTYPE_PXE_BIOS			3
-#define OPTYPE_OFFSET_SPECIFIED		7
-#define OPTYPE_FCOE_BIOS		8
-#define OPTYPE_ISCSI_BACKUP		9
-#define OPTYPE_FCOE_FW_ACTIVE		10
-#define OPTYPE_FCOE_FW_BACKUP		11
-#define OPTYPE_NCSI_FW			13
-#define OPTYPE_REDBOOT_DIR		18
-#define OPTYPE_REDBOOT_CONFIG		19
-#define OPTYPE_SH_PHY_FW		21
-#define OPTYPE_FLASHISM_JUMPVECTOR	22
-#define OPTYPE_UFI_DIR			23
-#define OPTYPE_PHY_FW			99
-
-#define FLASH_BIOS_IMAGE_MAX_SIZE_g2	262144  /* Max OPTION ROM image sz */
-#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g2	262144  /* Max Redboot image sz    */
-#define FLASH_IMAGE_MAX_SIZE_g2		1310720 /* Max firmware image size */
-
-#define FLASH_NCSI_IMAGE_MAX_SIZE_g3	262144
-#define FLASH_PHY_FW_IMAGE_MAX_SIZE_g3	262144
-#define FLASH_BIOS_IMAGE_MAX_SIZE_g3	524288  /* Max OPTION ROM image sz */
-#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3	1048576 /* Max Redboot image sz    */
-#define FLASH_IMAGE_MAX_SIZE_g3		2097152 /* Max firmware image size */
-
-/* Offsets for components on Flash. */
-#define FLASH_REDBOOT_START_g2			0
-#define FLASH_FCoE_BIOS_START_g2		524288
-#define FLASH_iSCSI_PRIMARY_IMAGE_START_g2	1048576
-#define FLASH_iSCSI_BACKUP_IMAGE_START_g2	2359296
-#define FLASH_FCoE_PRIMARY_IMAGE_START_g2	3670016
-#define FLASH_FCoE_BACKUP_IMAGE_START_g2	4980736
-#define FLASH_iSCSI_BIOS_START_g2		7340032
-#define FLASH_PXE_BIOS_START_g2			7864320
-
-#define FLASH_REDBOOT_START_g3			262144
-#define FLASH_PHY_FW_START_g3			1310720
-#define FLASH_iSCSI_PRIMARY_IMAGE_START_g3	2097152
-#define FLASH_iSCSI_BACKUP_IMAGE_START_g3	4194304
-#define FLASH_FCoE_PRIMARY_IMAGE_START_g3	6291456
-#define FLASH_FCoE_BACKUP_IMAGE_START_g3	8388608
-#define FLASH_iSCSI_BIOS_START_g3		12582912
-#define FLASH_PXE_BIOS_START_g3			13107200
-#define FLASH_FCoE_BIOS_START_g3		13631488
-#define FLASH_NCSI_START_g3			15990784
-
-#define IMAGE_NCSI			16
-#define IMAGE_OPTION_ROM_PXE		32
-#define IMAGE_OPTION_ROM_FCoE		33
-#define IMAGE_OPTION_ROM_ISCSI		34
-#define IMAGE_FLASHISM_JUMPVECTOR	48
-#define IMAGE_FIRMWARE_iSCSI		160
-#define IMAGE_FIRMWARE_FCoE		162
-#define IMAGE_FIRMWARE_BACKUP_iSCSI	176
-#define IMAGE_FIRMWARE_BACKUP_FCoE	178
-#define IMAGE_FIRMWARE_PHY		192
-#define IMAGE_REDBOOT_DIR		208
-#define IMAGE_REDBOOT_CONFIG		209
-#define IMAGE_UFI_DIR			210
-#define IMAGE_BOOT_CODE			224
+/* Optypes of each component in the UFI */
+enum {
+	OPTYPE_ISCSI_ACTIVE = 0,
+	OPTYPE_REDBOOT = 1,
+	OPTYPE_BIOS = 2,
+	OPTYPE_PXE_BIOS = 3,
+	OPTYPE_OFFSET_SPECIFIED = 7,
+	OPTYPE_FCOE_BIOS = 8,
+	OPTYPE_ISCSI_BACKUP = 9,
+	OPTYPE_FCOE_FW_ACTIVE = 10,
+	OPTYPE_FCOE_FW_BACKUP = 11,
+	OPTYPE_NCSI_FW = 13,
+	OPTYPE_REDBOOT_DIR = 18,
+	OPTYPE_REDBOOT_CONFIG = 19,
+	OPTYPE_SH_PHY_FW = 21,
+	OPTYPE_FLASHISM_JUMPVECTOR = 22,
+	OPTYPE_UFI_DIR = 23,
+	OPTYPE_PHY_FW = 99
+};
+
+/* Maximum sizes of components in BE2 FW UFI */
+enum {
+	BE2_BIOS_COMP_MAX_SIZE = 0x40000,
+	BE2_REDBOOT_COMP_MAX_SIZE = 0x40000,
+	BE2_COMP_MAX_SIZE = 0x140000
+};
+
+/* Maximum sizes of components in BE3 FW UFI */
+enum {
+	BE3_NCSI_COMP_MAX_SIZE = 0x40000,
+	BE3_PHY_FW_COMP_MAX_SIZE = 0x40000,
+	BE3_BIOS_COMP_MAX_SIZE = 0x80000,
+	BE3_REDBOOT_COMP_MAX_SIZE = 0x100000,
+	BE3_COMP_MAX_SIZE = 0x200000
+};
+
+/* Offsets for components in BE2 FW UFI */
+enum {
+	BE2_REDBOOT_START = 0x8000,
+	BE2_FCOE_BIOS_START = 0x80000,
+	BE2_ISCSI_PRIMARY_IMAGE_START = 0x100000,
+	BE2_ISCSI_BACKUP_IMAGE_START = 0x240000,
+	BE2_FCOE_PRIMARY_IMAGE_START = 0x380000,
+	BE2_FCOE_BACKUP_IMAGE_START = 0x4c0000,
+	BE2_ISCSI_BIOS_START = 0x700000,
+	BE2_PXE_BIOS_START = 0x780000
+};
+
+/* Offsets for components in BE3 FW UFI */
+enum {
+	BE3_REDBOOT_START = 0x40000,
+	BE3_PHY_FW_START = 0x140000,
+	BE3_ISCSI_PRIMARY_IMAGE_START = 0x200000,
+	BE3_ISCSI_BACKUP_IMAGE_START = 0x400000,
+	BE3_FCOE_PRIMARY_IMAGE_START = 0x600000,
+	BE3_FCOE_BACKUP_IMAGE_START = 0x800000,
+	BE3_ISCSI_BIOS_START = 0xc00000,
+	BE3_PXE_BIOS_START = 0xc80000,
+	BE3_FCOE_BIOS_START = 0xd00000,
+	BE3_NCSI_START = 0xf40000
+};
+
+/* Component entry types */
+enum {
+	IMAGE_NCSI = 0x10,
+	IMAGE_OPTION_ROM_PXE = 0x20,
+	IMAGE_OPTION_ROM_FCOE = 0x21,
+	IMAGE_OPTION_ROM_ISCSI = 0x22,
+	IMAGE_FLASHISM_JUMPVECTOR = 0x30,
+	IMAGE_FIRMWARE_ISCSI = 0xa0,
+	IMAGE_FIRMWARE_FCOE = 0xa2,
+	IMAGE_FIRMWARE_BACKUP_ISCSI = 0xb0,
+	IMAGE_FIRMWARE_BACKUP_FCOE = 0xb2,
+	IMAGE_FIRMWARE_PHY = 0xc0,
+	IMAGE_REDBOOT_DIR = 0xd0,
+	IMAGE_REDBOOT_CONFIG = 0xd1,
+	IMAGE_UFI_DIR = 0xd2,
+	IMAGE_BOOT_CODE = 0xe2
+};
 
 struct controller_id {
 	u32 vendor;

drivers/net/ethernet/emulex/benet/be_main.c

@@ -4616,45 +4616,45 @@ static int be_flash_BEx(struct be_adapter *adapter,
 	const u8 *p;
 
 	struct flash_comp gen3_flash_types[] = {
-		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g3, OPTYPE_ISCSI_ACTIVE,
-			FLASH_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_iSCSI},
-		{ FLASH_REDBOOT_START_g3, OPTYPE_REDBOOT,
-			FLASH_REDBOOT_IMAGE_MAX_SIZE_g3, IMAGE_BOOT_CODE},
-		{ FLASH_iSCSI_BIOS_START_g3, OPTYPE_BIOS,
-			FLASH_BIOS_IMAGE_MAX_SIZE_g3, IMAGE_OPTION_ROM_ISCSI},
-		{ FLASH_PXE_BIOS_START_g3, OPTYPE_PXE_BIOS,
-			FLASH_BIOS_IMAGE_MAX_SIZE_g3, IMAGE_OPTION_ROM_PXE},
-		{ FLASH_FCoE_BIOS_START_g3, OPTYPE_FCOE_BIOS,
-			FLASH_BIOS_IMAGE_MAX_SIZE_g3, IMAGE_OPTION_ROM_FCoE},
-		{ FLASH_iSCSI_BACKUP_IMAGE_START_g3, OPTYPE_ISCSI_BACKUP,
-			FLASH_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_BACKUP_iSCSI},
-		{ FLASH_FCoE_PRIMARY_IMAGE_START_g3, OPTYPE_FCOE_FW_ACTIVE,
-			FLASH_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_FCoE},
-		{ FLASH_FCoE_BACKUP_IMAGE_START_g3, OPTYPE_FCOE_FW_BACKUP,
-			FLASH_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_BACKUP_FCoE},
-		{ FLASH_NCSI_START_g3, OPTYPE_NCSI_FW,
-			FLASH_NCSI_IMAGE_MAX_SIZE_g3, IMAGE_NCSI},
-		{ FLASH_PHY_FW_START_g3, OPTYPE_PHY_FW,
-			FLASH_PHY_FW_IMAGE_MAX_SIZE_g3, IMAGE_FIRMWARE_PHY}
+		{ BE3_ISCSI_PRIMARY_IMAGE_START, OPTYPE_ISCSI_ACTIVE,
+			BE3_COMP_MAX_SIZE, IMAGE_FIRMWARE_ISCSI},
+		{ BE3_REDBOOT_START, OPTYPE_REDBOOT,
+			BE3_REDBOOT_COMP_MAX_SIZE, IMAGE_BOOT_CODE},
+		{ BE3_ISCSI_BIOS_START, OPTYPE_BIOS,
+			BE3_BIOS_COMP_MAX_SIZE, IMAGE_OPTION_ROM_ISCSI},
+		{ BE3_PXE_BIOS_START, OPTYPE_PXE_BIOS,
+			BE3_BIOS_COMP_MAX_SIZE, IMAGE_OPTION_ROM_PXE},
+		{ BE3_FCOE_BIOS_START, OPTYPE_FCOE_BIOS,
+			BE3_BIOS_COMP_MAX_SIZE, IMAGE_OPTION_ROM_FCOE},
+		{ BE3_ISCSI_BACKUP_IMAGE_START, OPTYPE_ISCSI_BACKUP,
+			BE3_COMP_MAX_SIZE, IMAGE_FIRMWARE_BACKUP_ISCSI},
+		{ BE3_FCOE_PRIMARY_IMAGE_START, OPTYPE_FCOE_FW_ACTIVE,
+			BE3_COMP_MAX_SIZE, IMAGE_FIRMWARE_FCOE},
+		{ BE3_FCOE_BACKUP_IMAGE_START, OPTYPE_FCOE_FW_BACKUP,
+			BE3_COMP_MAX_SIZE, IMAGE_FIRMWARE_BACKUP_FCOE},
+		{ BE3_NCSI_START, OPTYPE_NCSI_FW,
+			BE3_NCSI_COMP_MAX_SIZE, IMAGE_NCSI},
+		{ BE3_PHY_FW_START, OPTYPE_PHY_FW,
+			BE3_PHY_FW_COMP_MAX_SIZE, IMAGE_FIRMWARE_PHY}
 	};
 
 	struct flash_comp gen2_flash_types[] = {
-		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g2, OPTYPE_ISCSI_ACTIVE,
-			FLASH_IMAGE_MAX_SIZE_g2, IMAGE_FIRMWARE_iSCSI},
-		{ FLASH_REDBOOT_START_g2, OPTYPE_REDBOOT,
-			FLASH_REDBOOT_IMAGE_MAX_SIZE_g2, IMAGE_BOOT_CODE},
-		{ FLASH_iSCSI_BIOS_START_g2, OPTYPE_BIOS,
-			FLASH_BIOS_IMAGE_MAX_SIZE_g2, IMAGE_OPTION_ROM_ISCSI},
-		{ FLASH_PXE_BIOS_START_g2, OPTYPE_PXE_BIOS,
-			FLASH_BIOS_IMAGE_MAX_SIZE_g2, IMAGE_OPTION_ROM_PXE},
-		{ FLASH_FCoE_BIOS_START_g2, OPTYPE_FCOE_BIOS,
-			FLASH_BIOS_IMAGE_MAX_SIZE_g2, IMAGE_OPTION_ROM_FCoE},
-		{ FLASH_iSCSI_BACKUP_IMAGE_START_g2, OPTYPE_ISCSI_BACKUP,
-			FLASH_IMAGE_MAX_SIZE_g2, IMAGE_FIRMWARE_BACKUP_iSCSI},
-		{ FLASH_FCoE_PRIMARY_IMAGE_START_g2, OPTYPE_FCOE_FW_ACTIVE,
-			FLASH_IMAGE_MAX_SIZE_g2, IMAGE_FIRMWARE_FCoE},
-		{ FLASH_FCoE_BACKUP_IMAGE_START_g2, OPTYPE_FCOE_FW_BACKUP,
-			 FLASH_IMAGE_MAX_SIZE_g2, IMAGE_FIRMWARE_BACKUP_FCoE}
+		{ BE2_ISCSI_PRIMARY_IMAGE_START, OPTYPE_ISCSI_ACTIVE,
+			BE2_COMP_MAX_SIZE, IMAGE_FIRMWARE_ISCSI},
+		{ BE2_REDBOOT_START, OPTYPE_REDBOOT,
+			BE2_REDBOOT_COMP_MAX_SIZE, IMAGE_BOOT_CODE},
+		{ BE2_ISCSI_BIOS_START, OPTYPE_BIOS,
+			BE2_BIOS_COMP_MAX_SIZE, IMAGE_OPTION_ROM_ISCSI},
+		{ BE2_PXE_BIOS_START, OPTYPE_PXE_BIOS,
+			BE2_BIOS_COMP_MAX_SIZE, IMAGE_OPTION_ROM_PXE},
+		{ BE2_FCOE_BIOS_START, OPTYPE_FCOE_BIOS,
+			BE2_BIOS_COMP_MAX_SIZE, IMAGE_OPTION_ROM_FCOE},
+		{ BE2_ISCSI_BACKUP_IMAGE_START, OPTYPE_ISCSI_BACKUP,
+			BE2_COMP_MAX_SIZE, IMAGE_FIRMWARE_BACKUP_ISCSI},
+		{ BE2_FCOE_PRIMARY_IMAGE_START, OPTYPE_FCOE_FW_ACTIVE,
+			BE2_COMP_MAX_SIZE, IMAGE_FIRMWARE_FCOE},
+		{ BE2_FCOE_BACKUP_IMAGE_START, OPTYPE_FCOE_FW_BACKUP,
+			 BE2_COMP_MAX_SIZE, IMAGE_FIRMWARE_BACKUP_FCOE}
 	};
 
 	if (BE3_chip(adapter)) {
@@ -4729,7 +4729,7 @@ static u16 be_get_img_optype(struct flash_section_entry fsec_entry)
 		return img_optype;
 
 	switch (img_type) {
-	case IMAGE_FIRMWARE_iSCSI:
+	case IMAGE_FIRMWARE_ISCSI:
 		img_optype = OPTYPE_ISCSI_ACTIVE;
 		break;
 	case IMAGE_BOOT_CODE:
@@ -4741,10 +4741,10 @@ static u16 be_get_img_optype(struct flash_section_entry fsec_entry)
 	case IMAGE_OPTION_ROM_PXE:
 		img_optype = OPTYPE_PXE_BIOS;
 		break;
-	case IMAGE_OPTION_ROM_FCoE:
+	case IMAGE_OPTION_ROM_FCOE:
 		img_optype = OPTYPE_FCOE_BIOS;
 		break;
-	case IMAGE_FIRMWARE_BACKUP_iSCSI:
+	case IMAGE_FIRMWARE_BACKUP_ISCSI:
 		img_optype = OPTYPE_ISCSI_BACKUP;
 		break;
 	case IMAGE_NCSI: