ARM: OMAP2: MMC: include mmc-omap platform header directly

Only a few files really need that platform header. When later splitting
omap_mmc_platform_data into omap_mmc and omap_mmc_hs, those files
declaring an hs mmc platform data will have to change the platform
include, which is a good sanity check.
Also removing omap242x_init_mmc, which is not used anywhere, checked
with grep.

Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

arch/arm/mach-omap2/board-n8x0.c

@@ -21,8 +21,10 @@
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/musb.h>
+#include <linux/mmc/host.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/platform_data/mmc-omap.h>
 #include <linux/mfd/menelaus.h>
 #include <sound/tlv320aic3x.h>
 

arch/arm/mach-omap2/hsmmc.c

@@ -14,14 +14,15 @@
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/mmc/host.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/mmc-omap.h>
 
 #include "soc.h"
 #include "omap_device.h"
 #include "omap-pm.h"
 
 #include "mux.h"
-#include "mmc.h"
 #include "hsmmc.h"
 #include "control.h"
 

arch/arm/mach-omap2/mmc.h

@@ -1,5 +1,3 @@
-#include <linux/mmc/host.h>
-#include <linux/platform_data/mmc-omap.h>
 
 #define OMAP24XX_NR_MMC		2
 #define OMAP2420_MMC_SIZE	OMAP1_MMC_SIZE
@@ -7,14 +5,6 @@
 
 #define OMAP4_MMC_REG_OFFSET	0x100
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-#else
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-#endif
-
 struct omap_hwmod;
 int omap_msdi_reset(struct omap_hwmod *oh);
 

arch/arm/mach-omap2/omap4-common.c

@@ -36,7 +36,6 @@
 #include "soc.h"
 #include "iomap.h"
 #include "common.h"
-#include "mmc.h"
 #include "prminst44xx.h"
 #include "prcm_mpu44xx.h"
 #include "omap4-sar-layout.h"

arch/arm/mach-omap2/omap_hwmod_2430_data.c

@@ -15,12 +15,12 @@
 
 #include <linux/i2c-omap.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/mmc-omap.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/omap-dma.h>
 #include <plat/dmtimer.h>
 
 #include "omap_hwmod.h"
-#include "mmc.h"
 #include "l3_2xxx.h"
 
 #include "soc.h"

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c

@@ -15,10 +15,10 @@
  */
 
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/mmc-omap.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include "omap_hwmod.h"
 #include "i2c.h"
-#include "mmc.h"
 #include "wd_timer.h"
 #include "cm33xx.h"
 #include "prm33xx.h"

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -27,7 +27,6 @@
 #include "prm33xx.h"
 #include "prm-regbits-33xx.h"
 #include "i2c.h"
-#include "mmc.h"
 #include "wd_timer.h"
 #include "omap_hwmod_33xx_43xx_common_data.h"
 

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -18,6 +18,7 @@
 #include <linux/i2c-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/mmc-omap.h>
 
 #include <linux/omap-dma.h>
 #include "l3_3xxx.h"
@@ -37,7 +38,6 @@
 #include "cm-regbits-34xx.h"
 
 #include "i2c.h"
-#include "mmc.h"
 #include "wd_timer.h"
 #include "serial.h"
 

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -22,6 +22,7 @@
 
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/mmc-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/i2c-omap.h>
 
@@ -39,7 +40,6 @@
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 #include "i2c.h"
-#include "mmc.h"
 #include "wd_timer.h"
 
 /* Base offset for all OMAP4 interrupts external to MPUSS */

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -19,6 +19,7 @@
 
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/mmc-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/i2c-omap.h>
 
@@ -33,7 +34,6 @@
 #include "cm2_54xx.h"
 #include "prm54xx.h"
 #include "i2c.h"
-#include "mmc.h"
 #include "wd_timer.h"
 
 /* Base offset for all OMAP5 interrupts external to MPUSS */

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -19,6 +19,7 @@
 
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/mmc-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/i2c-omap.h>
 
@@ -33,7 +34,6 @@
 #include "cm2_7xx.h"
 #include "prm7xx.h"
 #include "i2c.h"
-#include "mmc.h"
 #include "wd_timer.h"
 #include "soc.h"