net: bcmgenet: remove PHY_BRCM_100MBPS_WAR

Now that we have removed the need for the PHY_BRCM_100MBPS_WAR flag, we
can remove it from the GENET driver and the broadcom shared header file.
The PHY driver checks the PHY supported bitmask instead.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/genet/bcmmii.c

@@ -296,7 +296,6 @@ static int bcmgenet_mii_probe(struct net_device *dev)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct device_node *dn = priv->pdev->dev.of_node;
 	struct phy_device *phydev;
-	unsigned int phy_flags;
 	int ret;
 
 	if (priv->phydev) {
@@ -338,15 +337,6 @@ static int bcmgenet_mii_probe(struct net_device *dev)
 		return ret;
 	}
 
-	phy_flags = PHY_BRCM_100MBPS_WAR;
-
-	/* workarounds are only needed for 100Mpbs PHYs, and
-	 * never on GENET V1 hardware
-	 */
-	if ((phydev->supported & PHY_GBIT_FEATURES) || GENET_IS_V1(priv))
-		phy_flags = 0;
-
-	phydev->dev_flags |= phy_flags;
 	phydev->advertising = phydev->supported;
 
 	/* The internal PHY has its link interrupts routed to the

include/linux/brcmphy.h

@@ -40,7 +40,6 @@
 #define PHY_BRCM_CLEAR_RGMII_MODE	0x00004000
 #define PHY_BRCM_DIS_TXCRXC_NOENRGY	0x00008000
 /* Broadcom BCM7xxx specific workarounds */
-#define PHY_BRCM_100MBPS_WAR		0x00010000
 #define PHY_BRCM_7XXX_REV(x)		(((x) >> 8) & 0xff)
 #define PHY_BRCM_7XXX_PATCH(x)		((x) & 0xff)
 #define PHY_BCM_FLAGS_VALID		0x80000000