rtl8xxxu: Use correct 8051 reset function for 8723b parts

8723b needs more action, so implement support for device specific
reset functions.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c

@@ -2720,12 +2720,44 @@ static void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv)
 	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
 	val8 &= ~BIT(0);
 	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
 	sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC);
 	sys_func &= ~SYS_FUNC_CPU_ENABLE;
 	rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
+
 	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
 	val8 |= BIT(0);
 	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+	sys_func |= SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
+}
+
+static void rtl8723bu_reset_8051(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 sys_func;
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
+	val8 &= ~BIT(1);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+	sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	sys_func &= ~SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
+	val8 &= ~BIT(1);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
 	sys_func |= SYS_FUNC_CPU_ENABLE;
 	rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
 }
@@ -2758,7 +2790,7 @@ static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv)
 	 * Reset the 8051 in order for the firmware to start running,
 	 * otherwise it won't come up on the 8192eu
 	 */
-	rtl8xxxu_reset_8051(priv);
+	priv->fops->reset_8051(priv);
 
 	/* Wait for firmware to become ready */
 	for (i = 0; i < RTL8XXXU_FIRMWARE_POLL_MAX; i++) {
@@ -2805,7 +2837,7 @@ static int rtl8xxxu_download_firmware(struct rtl8xxxu_priv *priv)
 	if (val8 & MCU_FW_RAM_SEL) {
 		pr_info("do the RAM reset\n");
 		rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
-		rtl8xxxu_reset_8051(priv);
+		priv->fops->reset_8051(priv);
 	}
 
 	/* MCU firmware download enable */
@@ -8405,6 +8437,7 @@ static struct rtl8xxxu_fileops rtl8723au_fops = {
 	.load_firmware = rtl8723au_load_firmware,
 	.power_on = rtl8723au_power_on,
 	.power_off = rtl8xxxu_power_off,
+	.reset_8051 = rtl8xxxu_reset_8051,
 	.llt_init = rtl8xxxu_init_llt_table,
 	.phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
 	.config_channel = rtl8723au_config_channel,
@@ -8429,6 +8462,7 @@ static struct rtl8xxxu_fileops rtl8723bu_fops = {
 	.load_firmware = rtl8723bu_load_firmware,
 	.power_on = rtl8723bu_power_on,
 	.power_off = rtl8723bu_power_off,
+	.reset_8051 = rtl8723bu_reset_8051,
 	.llt_init = rtl8xxxu_auto_llt_table,
 	.phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
 	.phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
@@ -8459,6 +8493,7 @@ static struct rtl8xxxu_fileops rtl8192cu_fops = {
 	.load_firmware = rtl8192cu_load_firmware,
 	.power_on = rtl8192cu_power_on,
 	.power_off = rtl8xxxu_power_off,
+	.reset_8051 = rtl8xxxu_reset_8051,
 	.llt_init = rtl8xxxu_init_llt_table,
 	.phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
 	.config_channel = rtl8723au_config_channel,
@@ -8485,6 +8520,7 @@ static struct rtl8xxxu_fileops rtl8192eu_fops = {
 	.load_firmware = rtl8192eu_load_firmware,
 	.power_on = rtl8192eu_power_on,
 	.power_off = rtl8xxxu_power_off,
+	.reset_8051 = rtl8xxxu_reset_8051,
 	.llt_init = rtl8xxxu_auto_llt_table,
 	.phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
 	.config_channel = rtl8723bu_config_channel,

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h

@@ -1258,6 +1258,7 @@ struct rtl8xxxu_fileops {
 	int (*load_firmware) (struct rtl8xxxu_priv *priv);
 	int (*power_on) (struct rtl8xxxu_priv *priv);
 	void (*power_off) (struct rtl8xxxu_priv *priv);
+	void (*reset_8051) (struct rtl8xxxu_priv *priv);
 	int (*llt_init) (struct rtl8xxxu_priv *priv, u8 last_tx_page);
 	void (*phy_init_antenna_selection) (struct rtl8xxxu_priv *priv);
 	void (*phy_iq_calibrate) (struct rtl8xxxu_priv *priv);