Merge branch 'connectivity-ti-linux-4.19.y' of git://git.ti.com/connectivity-integration-tree/connectivity-ti-linux-kernel into ti-linux-4.19.y

TI-Feature: connectivity
TI-Tree: git://git.ti.com/connectivity-integration-tree/connectivity-ti-linux-kernel.git
TI-Branch: connectivity-ti-linux-4.19.y

* 'connectivity-ti-linux-4.19.y' of git://git.ti.com/connectivity-integration-tree/connectivity-ti-linux-kernel:
  mmc: sdhci_am654: Clear HISPD_ENA in some lower speed modes
  mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning

Signed-off-by: LCPD Auto Merger <lcpd_integration@list.ti.com>

drivers/mmc/host/Kconfig

@@ -949,6 +949,7 @@ config MMC_SDHCI_OMAP
 config MMC_SDHCI_AM654
 	tristate "Support for the SDHCI Controller in TI's AM654 SOCs"
 	depends on MMC_SDHCI_PLTFM && OF
+	select MMC_SDHCI_IO_ACCESSORS
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  support present in TI's AM654 SOCs. The controller supports

drivers/mmc/host/sdhci-omap.c

@@ -797,6 +797,43 @@ void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
 	sdhci_reset(host, mask);
 }
 
+#define CMD_ERR_MASK (SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX |\
+		      SDHCI_INT_TIMEOUT)
+#define CMD_MASK (CMD_ERR_MASK | SDHCI_INT_RESPONSE)
+
+static irqreturn_t sdhci_omap_irq(struct sdhci_host *host, u32 intmask)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+
+	if (omap_host->is_tuning && host->cmd && !host->data_early &&
+	    (intmask & CMD_ERR_MASK)) {
+
+		/*
+		 * Since we are not resetting data lines during tuning
+		 * operation, data error or data complete interrupts
+		 * might still arrive. Mark this request as a failure
+		 * but still wait for the data interrupt
+		 */
+		if (intmask & SDHCI_INT_TIMEOUT)
+			host->cmd->error = -ETIMEDOUT;
+		else
+			host->cmd->error = -EILSEQ;
+
+		host->cmd = NULL;
+
+		/*
+		 * Sometimes command error interrupts and command complete
+		 * interrupt will arrive together. Clear all command related
+		 * interrupts here.
+		 */
+		sdhci_writel(host, intmask & CMD_MASK, SDHCI_INT_STATUS);
+		intmask &= ~CMD_MASK;
+	}
+
+	return intmask;
+}
+
 static struct sdhci_ops sdhci_omap_ops = {
 	.set_clock = sdhci_omap_set_clock,
 	.set_power = sdhci_omap_set_power,
@@ -807,6 +844,7 @@ static struct sdhci_ops sdhci_omap_ops = {
 	.platform_send_init_74_clocks = sdhci_omap_init_74_clocks,
 	.reset = sdhci_omap_reset,
 	.set_uhs_signaling = sdhci_omap_set_uhs_signaling,
+	.irq = sdhci_omap_irq,
 };
 
 static int sdhci_omap_set_capabilities(struct sdhci_omap_host *omap_host)

drivers/mmc/host/sdhci_am654.c

@@ -159,6 +159,27 @@ static void sdhci_am654_set_power(struct sdhci_host *host, unsigned char mode,
 	sdhci_set_power_noreg(host, mode, vdd);
 }
 
+static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
+{
+	unsigned char timing = host->mmc->ios.timing;
+
+	if (reg == SDHCI_HOST_CONTROL) {
+		switch (timing) {
+		/*
+		 * According to the data manual, HISPD bit
+		 * should not be set in these speed modes.
+		 */
+		case MMC_TIMING_SD_HS:
+		case MMC_TIMING_MMC_HS:
+		case MMC_TIMING_UHS_SDR12:
+		case MMC_TIMING_UHS_SDR25:
+			val &= ~SDHCI_CTRL_HISPD;
+		}
+	}
+
+	writeb(val, host->ioaddr + reg);
+}
+
 struct sdhci_ops sdhci_am654_ops = {
 	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 	.get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
@@ -166,6 +187,7 @@ struct sdhci_ops sdhci_am654_ops = {
 	.set_bus_width = sdhci_set_bus_width,
 	.set_power = sdhci_am654_set_power,
 	.set_clock = sdhci_am654_set_clock,
+	.write_b = sdhci_am654_write_b,
 	.reset = sdhci_reset,
 };