Просмотр исходного кода

drm/i915/bxt: mask off the DPLL state checker bits we don't program

For the purpose of state checking we only care about the DPLL HW flags
that we actually program, so mask off the ones that we don't.

This fixes one set of DPLL state check failures.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak 10 лет назад
Родитель
Сommit
793dfa59bc
1 измененных файлов с 20 добавлено и 0 удалено
  1. 20 0
      drivers/gpu/drm/i915/intel_ddi.c

+ 20 - 0
drivers/gpu/drm/i915/intel_ddi.c

@@ -2854,19 +2854,38 @@ static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
 		return false;
 
 	hw_state->ebb0 = I915_READ(BXT_PORT_PLL_EBB_0(port));
+	hw_state->ebb0 &= PORT_PLL_P1_MASK | PORT_PLL_P2_MASK;
+
 	hw_state->ebb4 = I915_READ(BXT_PORT_PLL_EBB_4(port));
 	hw_state->ebb4 &= PORT_PLL_10BIT_CLK_ENABLE;
 
 	hw_state->pll0 = I915_READ(BXT_PORT_PLL(port, 0));
+	hw_state->pll0 &= PORT_PLL_M2_MASK;
+
 	hw_state->pll1 = I915_READ(BXT_PORT_PLL(port, 1));
+	hw_state->pll1 &= PORT_PLL_N_MASK;
+
 	hw_state->pll2 = I915_READ(BXT_PORT_PLL(port, 2));
+	hw_state->pll2 &= PORT_PLL_M2_FRAC_MASK;
+
 	hw_state->pll3 = I915_READ(BXT_PORT_PLL(port, 3));
+	hw_state->pll3 &= PORT_PLL_M2_FRAC_ENABLE;
+
 	hw_state->pll6 = I915_READ(BXT_PORT_PLL(port, 6));
+	hw_state->pll6 &= PORT_PLL_PROP_COEFF_MASK |
+			  PORT_PLL_INT_COEFF_MASK |
+			  PORT_PLL_GAIN_CTL_MASK;
+
 	hw_state->pll8 = I915_READ(BXT_PORT_PLL(port, 8));
+	hw_state->pll8 &= PORT_PLL_TARGET_CNT_MASK;
+
 	hw_state->pll9 = I915_READ(BXT_PORT_PLL(port, 9));
 	hw_state->pll9 &= PORT_PLL_LOCK_THRESHOLD_MASK;
 
 	hw_state->pll10 = I915_READ(BXT_PORT_PLL(port, 10));
+	hw_state->pll10 &= PORT_PLL_DCO_AMP_OVR_EN_H |
+			   PORT_PLL_DCO_AMP_MASK;
+
 	/*
 	 * While we write to the group register to program all lanes at once we
 	 * can read only lane registers. We configure all lanes the same way, so
@@ -2877,6 +2896,7 @@ static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
 		DRM_DEBUG_DRIVER("lane stagger config different for lane 01 (%08x) and 23 (%08x)\n",
 				 hw_state->pcsdw12,
 				 I915_READ(BXT_PORT_PCS_DW12_LN23(port)));
+	hw_state->pcsdw12 &= LANE_STAGGER_MASK | LANESTAGGER_STRAP_OVRD;
 
 	return true;
 }