Merge tag 'drm-intel-fixes-2014-03-04' of ssh://git.freedesktop.org/git/drm-intel into drm-fixes

Small fixes all around, mostly stable material. Please pull.

* tag 'drm-intel-fixes-2014-03-04' of ssh://git.freedesktop.org/git/drm-intel:
  drm/i915: Reject >165MHz modes w/ DVI monitors
  drm/i915: fix assert_cursor on BDW
  drm/i915: vlv: reserve GT power context early
  drm/i915: fix pch pci device enumeration
  drm/i915: Resolving the memory region conflict for Stolen area
  drm/i915: use backlight legacy combination mode also for i915gm/i945gm

drivers/gpu/drm/i915/i915_drv.c

@@ -403,7 +403,7 @@ MODULE_DEVICE_TABLE(pci, pciidlist);
 void intel_detect_pch(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct pci_dev *pch;
+	struct pci_dev *pch = NULL;
 
 	/* In all current cases, num_pipes is equivalent to the PCH_NOP setting
 	 * (which really amounts to a PCH but no South Display).
@@ -424,12 +424,9 @@ void intel_detect_pch(struct drm_device *dev)
 	 * all the ISA bridge devices and check for the first match, instead
 	 * of only checking the first one.
 	 */
-	pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
-	while (pch) {
-		struct pci_dev *curr = pch;
+	while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) {
 		if (pch->vendor == PCI_VENDOR_ID_INTEL) {
-			unsigned short id;
-			id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
+			unsigned short id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
 			dev_priv->pch_id = id;
 
 			if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
@@ -461,18 +458,16 @@ void intel_detect_pch(struct drm_device *dev)
 				DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
 				WARN_ON(!IS_HASWELL(dev));
 				WARN_ON(!IS_ULT(dev));
-			} else {
-				goto check_next;
-			}
-			pci_dev_put(pch);
+			} else
+				continue;
+
 			break;
 		}
-check_next:
-		pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, curr);
-		pci_dev_put(curr);
 	}
 	if (!pch)
-		DRM_DEBUG_KMS("No PCH found?\n");
+		DRM_DEBUG_KMS("No PCH found.\n");
+
+	pci_dev_put(pch);
 }
 
 bool i915_semaphore_is_enabled(struct drm_device *dev)

drivers/gpu/drm/i915/i915_gem_stolen.c

@@ -82,9 +82,22 @@ static unsigned long i915_stolen_to_physical(struct drm_device *dev)
 	r = devm_request_mem_region(dev->dev, base, dev_priv->gtt.stolen_size,
 				    "Graphics Stolen Memory");
 	if (r == NULL) {
-		DRM_ERROR("conflict detected with stolen region: [0x%08x - 0x%08x]\n",
-			  base, base + (uint32_t)dev_priv->gtt.stolen_size);
-		base = 0;
+		/*
+		 * One more attempt but this time requesting region from
+		 * base + 1, as we have seen that this resolves the region
+		 * conflict with the PCI Bus.
+		 * This is a BIOS w/a: Some BIOS wrap stolen in the root
+		 * PCI bus, but have an off-by-one error. Hence retry the
+		 * reservation starting from 1 instead of 0.
+		 */
+		r = devm_request_mem_region(dev->dev, base + 1,
+					    dev_priv->gtt.stolen_size - 1,
+					    "Graphics Stolen Memory");
+		if (r == NULL) {
+			DRM_ERROR("conflict detected with stolen region: [0x%08x - 0x%08x]\n",
+				  base, base + (uint32_t)dev_priv->gtt.stolen_size);
+			base = 0;
+		}
 	}
 
 	return base;

drivers/gpu/drm/i915/intel_display.c

@@ -1092,12 +1092,12 @@ static void assert_cursor(struct drm_i915_private *dev_priv,
 	struct drm_device *dev = dev_priv->dev;
 	bool cur_state;
 
-	if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
-		cur_state = I915_READ(CURCNTR_IVB(pipe)) & CURSOR_MODE;
-	else if (IS_845G(dev) || IS_I865G(dev))
+	if (IS_845G(dev) || IS_I865G(dev))
 		cur_state = I915_READ(_CURACNTR) & CURSOR_ENABLE;
-	else
+	else if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev))
 		cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
+	else
+		cur_state = I915_READ(CURCNTR_IVB(pipe)) & CURSOR_MODE;
 
 	WARN(cur_state != state,
 	     "cursor on pipe %c assertion failure (expected %s, current %s)\n",

drivers/gpu/drm/i915/intel_hdmi.c

@@ -845,7 +845,7 @@ static int hdmi_portclock_limit(struct intel_hdmi *hdmi)
 {
 	struct drm_device *dev = intel_hdmi_to_dev(hdmi);
 
-	if (IS_G4X(dev))
+	if (!hdmi->has_hdmi_sink || IS_G4X(dev))
 		return 165000;
 	else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8)
 		return 300000;
@@ -899,8 +899,8 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
 	 * outputs. We also need to check that the higher clock still fits
 	 * within limits.
 	 */
-	if (pipe_config->pipe_bpp > 8*3 && clock_12bpc <= portclock_limit
-	    && HAS_PCH_SPLIT(dev)) {
+	if (pipe_config->pipe_bpp > 8*3 && intel_hdmi->has_hdmi_sink &&
+	    clock_12bpc <= portclock_limit && HAS_PCH_SPLIT(dev)) {
 		DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
 		desired_bpp = 12*3;
 

drivers/gpu/drm/i915/intel_panel.c

@@ -698,7 +698,7 @@ static void i9xx_enable_backlight(struct intel_connector *connector)
 		freq /= 0xff;
 
 	ctl = freq << 17;
-	if (IS_GEN2(dev) && panel->backlight.combination_mode)
+	if (panel->backlight.combination_mode)
 		ctl |= BLM_LEGACY_MODE;
 	if (IS_PINEVIEW(dev) && panel->backlight.active_low_pwm)
 		ctl |= BLM_POLARITY_PNV;
@@ -979,7 +979,7 @@ static int i9xx_setup_backlight(struct intel_connector *connector)
 
 	ctl = I915_READ(BLC_PWM_CTL);
 
-	if (IS_GEN2(dev))
+	if (IS_GEN2(dev) || IS_I915GM(dev) || IS_I945GM(dev))
 		panel->backlight.combination_mode = ctl & BLM_LEGACY_MODE;
 
 	if (IS_PINEVIEW(dev))

drivers/gpu/drm/i915/intel_pm.c

@@ -3493,6 +3493,8 @@ static void valleyview_setup_pctx(struct drm_device *dev)
 	u32 pcbr;
 	int pctx_size = 24*1024;
 
+	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
 	pcbr = I915_READ(VLV_PCBR);
 	if (pcbr) {
 		/* BIOS set it up already, grab the pre-alloc'd space */
@@ -3542,8 +3544,6 @@ static void valleyview_enable_rps(struct drm_device *dev)
 		I915_WRITE(GTFIFODBG, gtfifodbg);
 	}
 
-	valleyview_setup_pctx(dev);
-
 	/* If VLV, Forcewake all wells, else re-direct to regular path */
 	gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
 
@@ -4395,6 +4395,8 @@ void intel_enable_gt_powersave(struct drm_device *dev)
 		ironlake_enable_rc6(dev);
 		intel_init_emon(dev);
 	} else if (IS_GEN6(dev) || IS_GEN7(dev)) {
+		if (IS_VALLEYVIEW(dev))
+			valleyview_setup_pctx(dev);
 		/*
 		 * PCU communication is slow and this doesn't need to be
 		 * done at any specific time, so do this out of our fast path