drm/i915: check port power domain when reading the encoder hw state

Since the encoder is tied to its port, we need to make sure the power
domain for that port is on before reading out the encoder HW state.

Note that this also covers also all connector get_hw_state handlers,
since all those just call the corresponding encoder get_hw_state
handler, which checks - after this change - for all power domains
the connector needs.

v2:
- no change
v3:
- push down the power domain checks into the specific encoder
  get_hw_state handlers (Daniel)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_crt.c

@@ -68,8 +68,13 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crt *crt = intel_encoder_to_crt(encoder);
+	enum intel_display_power_domain power_domain;
 	u32 tmp;
 
+	power_domain = intel_display_port_power_domain(encoder);
+	if (!intel_display_power_enabled(dev_priv, power_domain))
+		return false;
+
 	tmp = I915_READ(crt->adpa_reg);
 
 	if (!(tmp & ADPA_DAC_ENABLE))

drivers/gpu/drm/i915/intel_ddi.c

@@ -1145,9 +1145,14 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum port port = intel_ddi_get_encoder_port(encoder);
+	enum intel_display_power_domain power_domain;
 	u32 tmp;
 	int i;
 
+	power_domain = intel_display_port_power_domain(encoder);
+	if (!intel_display_power_enabled(dev_priv, power_domain))
+		return false;
+
 	tmp = I915_READ(DDI_BUF_CTL(port));
 
 	if (!(tmp & DDI_BUF_CTL_ENABLE))

drivers/gpu/drm/i915/intel_dp.c

@@ -1479,7 +1479,14 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder,
 	enum port port = dp_to_dig_port(intel_dp)->port;
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 tmp = I915_READ(intel_dp->output_reg);
+	enum intel_display_power_domain power_domain;
+	u32 tmp;
+
+	power_domain = intel_display_port_power_domain(encoder);
+	if (!intel_display_power_enabled(dev_priv, power_domain))
+		return false;
+
+	tmp = I915_READ(intel_dp->output_reg);
 
 	if (!(tmp & DP_PORT_EN))
 		return false;

drivers/gpu/drm/i915/intel_dsi.c

@@ -243,11 +243,16 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
 				   enum pipe *pipe)
 {
 	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+	enum intel_display_power_domain power_domain;
 	u32 port, func;
 	enum pipe p;
 
 	DRM_DEBUG_KMS("\n");
 
+	power_domain = intel_display_port_power_domain(encoder);
+	if (!intel_display_power_enabled(dev_priv, power_domain))
+		return false;
+
 	/* XXX: this only works for one DSI output */
 	for (p = PIPE_A; p <= PIPE_B; p++) {
 		port = I915_READ(MIPI_PORT_CTRL(p));

drivers/gpu/drm/i915/intel_hdmi.c

@@ -667,8 +667,13 @@ static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+	enum intel_display_power_domain power_domain;
 	u32 tmp;
 
+	power_domain = intel_display_port_power_domain(encoder);
+	if (!intel_display_power_enabled(dev_priv, power_domain))
+		return false;
+
 	tmp = I915_READ(intel_hdmi->hdmi_reg);
 
 	if (!(tmp & SDVO_ENABLE))